Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 118 views

    Gen Rad 1659

    Uploaded by

    balaji3i
    The document describes the GenRad 1659 Digibridge RLC Tester, which is a microprocessor-based instrument that automatically identifies and measures passive components like resistors, inductors, and capacitors. It has features like four test frequencies, automatic binning of components based on programmable test limits, and optional interfaces. The document provides details on measurement parameters, accuracy, interfaces, dimensions, ordering information, and optional accessories.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Gen Rad 1659

    Uploaded by

    balaji3i
    118 views2 pages
    The document describes the GenRad 1659 Digibridge RLC Tester, which is a microprocessor-based instrument that automatically identifies and measures passive components like resistors, inductors, and capacitors. It has features like four test frequencies, automatic binning of components based on programmable test limits, and optional interfaces. The document provides details on measurement parameters, accuracy, interfaces, dimensions, ordering information, and optional accessories.

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the GenRad 1659 Digibridge RLC Tester, which is a microprocessor-based instrument that automatically identifies and measures passive components like resistors, inductors, and capacitors. It has features like four test frequencies, automatic binning of components based on programmable test limits, and optional interfaces. The document provides details on measurement parameters, accuracy, interfaces, dimensions, ordering information, and optional accessories.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    118 views2 pages

    Gen Rad 1659

    Uploaded by

    balaji3i
    The document describes the GenRad 1659 Digibridge RLC Tester, which is a microprocessor-based instrument that automatically identifies and measures passive components like resistors, inductors, and capacitors. It has features like four test frequencies, automatic binning of components based on programmable test limits, and optional interfaces. The document provides details on measurement parameters, accuracy, interfaces, dimensions, ordering information, and optional accessories.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Contents Applic.

    Selection Products GenRad Index


    products
    p. 2 pp. 4-8 pp. 9-11 pp. 12-87 pp. 50-87 p. 89

    Digibridges
    1659 Digibridge RLC Testers p. 1 of 2

    The GenRad 1659 Digibridge RLC Tester is an easily


    programmable, microprocessor-based high performance
    passive component tester. It automatically identifies the
    type of component under test and measures in the prop-
    er range. The result is simple, precise, unambiguous RLC
    component testing.

    The 1659 RLC Digibridge is an instrument for measuring primary parameters of inductance (L), capacitance
    (C) and resistance (R) and secondary parameters of dissipation factor (D) and quality factor (Q). QuadTech
    designed this single compact unit with maximum flexibility and operator convenience in mind.

    The simple front panel design of the Digibridge requires less effort to operate. Digital display and user friendly
    control allows test parameters and limits to be set easily.
    Programmable test limits and automatic binning give the 1659 its remarkable capability. Programming test
    limits is as simple as pushing a few buttons in an easily understood sequence. Once set, the operator works in
    an automatic binning mode designed to replace guesswork with consistent throughput. The GenRad1659 is
    ideal for incoming inspection because it satisfies a wide range of testing requirements.

    FEATURES:
    • Easy to Use
    • Accuracy of 0.1% for RLC measurements
    • Four test frequencies of 100Hz, 120Hz, lkHz and 10kHz
    • A choice of three test speeds: 2,4, or 8 measurements per second to complement automatic handling equipment
    and maximize throughput.
    • A choice of two measurement modes: Continuous or Triggered (single measurement or average of 10) ensures
    measurement flexibility.
    • A full, five-digit LED display for RLC measurements and a four-digit readout for D and Q testing, simultaneously
    display both test results for each measurement, automatically.
    • A built-in test fixture for fast setup and ease-of-use when testing axial and radial lead components.
    • Guarded Kelvin measurement techniques protect measurement integrity.
    • Automatic self-test and diagnostic check maintains reliable, error-free operation.
    • Automatic limit comparison and binning ensure fast, mistake-proof sorting of components.
    • Optional IEEE-488 Bus and Handler Interface enable remote programming and allow the addition of a component
    handler to optimize throughput.

    IET LABS, INC. in the GenRad Tradition www.ietlabs.com


    534 Main Street, Westbury, NY 11590 TEL: (516) 334-5959 • (800) 899-8438 • FAX: (516) 334-5988
    9
    Contents Applic. Selection Products GenRad Index
    products
    p. 2 pp. 4-8 pp. 9-11 pp. 12-87 pp. 50-87 p. 89

    Digibridges
    1659 Digibridge RLC Testers p. 2 of 2

    1659 Digibridge RLC Features


    Measurement Parameters: R/Q, L/Q, C/R, C/D (series or parallel)
    Test Frequencies: 100Hz, 120Hz, lkHz,and 10kHz.
    Accuracy ±0.01%.
    Applied Voltage: 0.3V rmsV maximum
    Measurement Speed: 2, 4 or 8 measurements/second for Slow, Medium or Fast.
    Measurement Mode: Continuous, Triggered (single, or 1 to 10 measurements averaged).
    Display Format: Dual Display featuring 5 full digit LED for RLC and 4 full digit LED for DQ
    Bin Number,Value
    Automatically positioned decimal points and minus signs where appropriate.
    Individual LED indicators for parameters, units, and measurement conditions.
    GO/NO GO lights
    Bias: Internal 2.0VDC External up to 60VDC
    Automatic Functions: Auto ranging with manual hold
    Auto parameter (RLC) with manual selection
    Binning: Eight pass bins for RLC Two fail bins, RLC and DQ
    Interfaces: IEEE-488/Handler Interface option
    Ranges:
    Parameter RLC DQ
    R/Q 0.00001Ω to 99999MΩ 0.0001 to 9999
    L/Q 0.00001mH to 99999H 0.0001 to 9999
    C/D 0.00001pF to 99999mF 0.0001 to 9999

    Accuracy: Basic RLC ±0.1%.


    Basic DQ ±0.0005
    Zeroing: Open and short circuit compensation.
    General Features: • Charged Capacitor Protection (1 Joule)
    • Keyboard Lock
    • Store Test Conditions
    Dimensions: (w x h x d): 14.8 x 4.4 x 13.5in (375 x 112 x 343mm)
    Weight: 10 lbs. (4.5kg) net, 15 lbs. (6.8kg) shipping.
    Accessories Supplied: • Power Cable
    • Axial Lead Adapters
    • Test Fixture (Built-in)
    • Instruction Manual
    Enviromental: Operating: 0°C to +50°C
    Storage: -40°C to +75°C
    Humidity: <85%
    Power: • 90 - 250V AC
    • 50 or 60 Hz
    • 60W max
    Ordering Information
    Digibridge 1659 RLC Tester 1658-9620 IEEE/Handler Interface
    1689-9601 BNC Adapter Box
    Includes: 1689-9602 BNC to BNC Extender Cable
    QuadTech P/N Item
    1657-9600 Banana/Alligator Clip Extender Cable
    4200-0300 AC Power Cord
    1689-9604 Calibration Kit
    1657-5995 Axial Lead Adaptors
    7000-03 Kelvin Clip Extender Cable
    1659-0120 Instruction Manual
    7000-05 Chip Component Tweezers
    No P/N Calibration Certificate Traceable to NIST
    1689-9600 Remote Test Fixture
    1689-9605 GO/NO GO Remote Test Fixture
    1688-9600 874 Connector Extender Cable
    Optional Accessories:
    No P/N Calibration Data

    IET LABS, INC. in the GenRad Tradition www.ietlabs.com


    534 Main Street, Westbury, NY 11590 TEL: (516) 334-5959 • (800) 899-8438 • FAX: (516) 334-5988
    10

    You might also like