Wave Optics PDF
Wave Optics PDF
Light Propagation.
Light is a form of energy which generally gives the sensation of sight.
(1) Different theories
Newtons Huygen’s Maxwell’s EM Einstein’s de-Broglie’s
corpuscular wave theory wave theory quantum dual theory of
theory theory light
(i) Based on (i) Light travels (i) Light travels in (i) Light is (i) Light
Rectilinear in a hypothetical the form of EM produced, absorbed propagates both as
propagation of light medium ether waves with speed in and propagated as particles as well as
(high elasticity free space packets of energy waves
very low density) 1 called photons
as waves c
0 0
(ii) Light propagates in (ii) He proposed (ii) EM waves (ii) Energy (ii) Wave nature of
the form of tiny that light waves consists of electric associated with each light dominates
particles called are of and magnetic field hc when light interacts
Corpuscles. Colour of longitudinal oscillation and they photon E h with light. The
light is due to different nature. Later on do not require particle nature of
h = planks constant
size of corpuscles it was found that material medium to light dominates
they are travel 6 .6 10 34 J - sec when the light
transverse = frequency interacts with
= wavelength matter (micro-
scopic particles )
(2) Optical phenomena explained () or not explained () by the different theories of light
Plane WF
Spherical WF
Cylindrical WF
Point source
Line source
(v) Every point on the given wave front acts as a source of new disturbance called secondary wavelets.
Which travel in all directions with the velocity of light in the medium.
Primary Secondary
wave front wave front
(ii) Resultant
1
y = y1 – y2
Waves are meeting at a point
y1 + y2 = with out of phase
(i) Phase : The argument of sine or cosine in the expression for displacement of a wave is defined as the
phase. For displacement y = a sin t ; term t = phase or instantaneous phase
(ii) Phase difference () : The difference between the phases of two waves at a point is called phase
difference i.e. if y 1 a1 sin t and y 2 a 2 sin ( t ) so phase difference =
(iii) Path difference () : The difference in path length’s of two waves meeting at a point is called path
difference between the waves at that point. Also
2
T
(iv) Time difference (T.D.) : Time difference between the waves meeting at a point is T.D.
2
(3) Resultant amplitude and intensity
If suppose we have two waves y 1 a1 sin t and y 2 a 2 sin ( t ) ; where a1 , a 2 Individual
amplitudes, = Phase difference between the waves at an instant when they are meeting a point. I1, I2 =
Intensities of individual waves
Resultant amplitude : After superimposition of the given waves resultant amplitude (or the amplitude
of resultant wave) is given by A a 12 a 22 2 a 1 a 2 cos
For the interfering waves y1 = a1 sin t and y2 = a2 cos t, Phase difference between them is 90o. So
resultant amplitude A a12 a 22
Note : The term 2 I1 I 2 cos is called interference term. For incoherent interference this term is zero
so resultant intensity I I1 I 2
(4) Coherent sources
The sources of light which emits continuous light waves of the same wavelength, same frequency and in
same phase or having a constant phase difference are called coherent sources.
Two coherent sources are produced from a single source of light by adopting any one of the following two
methods
Division of wave front Division of amplitude
The light source is narrow Light sources is extended. Light wave partly reflected
(50%) and partly transmitted (50%)
The wave front emitted by a narrow source is divided in The amplitude of wave emitted by an extend source of light
two parts by reflection of refraction. is divided in two parts by partial reflection and partial
refraction.
The coherent sources obtained are imaginary e.g. The coherent sources obtained are real e.g. Newtons
Fresnel's biprism, Llyod's mirror Youngs' double slit etc. rings, Michelson's interferrometer colours in thin films
M1
Reflection
coating
S1
S S
superimpose
Two waves
S2 L M2
4 Wave Optics
(v) Resultant intensity at the point of observation will be (v) Resultant intensity at the point of observation will
maximum be minimum
I max I1 I 2 2 I1 I 2 I min I1 I 2 2 I1 I 2
I max I1 I 2
2
I min I1 I 2
2
If I1 I 2 I 0 I max 2I 0 If I1 I 2 I 0 I min 0
For identical source I1 I 2 I 0 I I 0 I 0 2 I 0 I 0 cos 4 I 0 cos 2 [1 + cos 2 cos 2 ]
2 2
Wave Optics 5
Note : In interference redistribution of energy takes place in the form of maxima and minima.
I max I min
Average intensity : I av I1 I 2 a12 a 22
2
Ratio of maximum and minimum intensities:
I max
2 2 2 2 1
I max I1 I 2 I1 / I 2 1
a1 a 2 a1 / a 2 1 also I1 a1 I min
a a a /a 1
I min I1 I 2 I2 a2
I1 / I 2 1 1 2 1 2 I max
1
I min
If two waves having equal intensity (I1 = I2 = I0) meets at two locations P and Q with path
difference 1 and 2 respectively then the ratio of resultant intensity at point P and Q will be
1
cos 2 cos 2 1
IP 2
IQ
cos 2 2 cos 2 2
2
Young’s Double Slit Experiment (YDSE)
Monochromatic light (single wavelength) falls on two narrow slits S1 and S2 which are very close together
acts as two coherent sources, when waves coming from two coherent sources (S 1 , S 2 ) superimposes on each
other, an interference pattern is obtained on the screen. In YDSE alternate bright and dark bands obtained on
the screen. These bands are called Fringes.
Screen
4 Dark
3 Bright
3 Dark
2 Bright
d = Distance between slits 2 Dark
D = Distance between slits and screen S1 1 Bright
1 Dark
= Wavelength of monochromatic S d Central bright
light emitted from source 1 Dark fringe
S2 1 Bright (or Central
2 Dark
2 Bright maxima)
3 Dark
3 Bright
4 Dark
D
S1
d C C
S1 S2
S2 d
D
(7) More about fringe
(i) All fringes are of
D β
equal width. Width of each fringe is and angular fringe width
d d D
(ii) If the whole YDSE set up is taken in another medium then changes so changes
3
e.g. in water w a w a a
w w 4
1
(iii) Fringe width i.e. with increase in separation between the sources, decreases.
d
n D
(iv) Position of nth bright fringe from central maxima x n n ; n 0, 1, 2 ....
d
(2 n 1) D (2 n 1)
(v) Position of nth dark fringe from central maxima x n ; n 1, 2,3 ....
2d 2
(vi) In YDSE, if n1 fringes are visible in a field of view with light of wavelength 1 , while n 2 with light of
wavelength 2 in the same field, then n 1 1 n 2 2 .
(vii) Separation (x ) between fringes
Between nth bright and mth bright fringes (n m ) Between nth bright and mth dark fringe
1
(a) If n m then x n m
2
x (n m )
1
(b) If n m then x m n
2
(i) The initial phase difference between the interfering waves must remain constant : Otherwise the
interference will not be sustained.
(ii) The frequency and wavelengths of two waves should be equal : If not the phase difference will not
remain constant and so the interference will not be sustained.
(iii) The light must be monochromatic : This eliminates overlapping of patterns as each wavelength
corresponds to one interference pattern.
(iv) The amplitudes of the waves must be equal : This improves contrast with I max 4 I 0 and I min 0 .
1
(v) The sources must be close to each other : Otherwise due to small fringe width the eye can not
d
resolve fringes resulting in uniform illumination.
(10) Shifting of fringe pattern in YDSE
If a transparent thin film of mica or glass is put in the path of one of the waves, then the whole fringe
pattern gets shifted.
t
If film is put in the path of upper wave, fringe pattern shifts upward and if
film is placed in the path of lower wave, pattern shift downward.
S1
D
Fringe shift
( 1) t ( 1) t d C
d
Additional path difference ( 1)t S2
( 1) t n Screen
If shift is equivalent to n fringes then n or t
( 1) D
Shift is independent of the order of fringe (i.e. shift of zero order maxima = shift of nth order maxima.
Shift is independent of wavelength.
(11) Fringe visibility (V)
With the help of visibility, knowledge about coherence, fringe contrast an interference pattern is obtained.
I max I min I1 I 2
V 2 If I min 0 , V 1 (maximum) i.e., fringe visibility will be best.
I max I min (I1 I 2 )
Also if I max 0, V 1 and If I max I min , V 0
(12) Missing wavelength in front of one of the slits in YDSE
From figure S2P = D 2 d 2 and S 1 P D S1 P
Air
Oil Air
Air
Water
Soap bubble in air
Oil film on water surface
(1) Thin films: In thin films interference takes place between the waves reflected from it’s two surfaces
and waves refracted through it.
Reflected rays
t r
r
Refracted rays
so 2 t (2n 1)
2 t n
2
Condition of destructive interference (minimum Condition of destructive interference (minimum
intensity) intensity)
2 t cos r (2n) 2 t cos r (2n 1)
2 2
For normal incidence 2 t n
For normal incidence 2 t (2n 1)
2
Note : The Thickness of the film for interference in visible light is of the order of 10 ,000 Å .
(2) Lloyd's Mirror
A plane glass plate (acting as a mirror) is illuminated at almost grazing incidence by a light from a slit S1.
A virtual image S2 of S1 is formed closed to S1 by reflection and these two act as coherent sources. The
expression giving the fringe width is the same as for the double slit, but the fringe system differs in one
important respect.
Wave Optics 9
In Lloyd's mirror, if the point P, for example, is such that the path difference S 2 P S 1 P is a whole number
of wavelengths, the fringe at P is dark not bright. This is due to 180o phase change which occurs when light is
reflected from a denser medium. This is equivalent to adding an extra half wavelength to the path of the
reflected wave. At grazing incidence a fringe is formed at O, where the geometrical path difference between the
direct and reflected waves is zero and it follows that it will be dark rather than bright.
P
S1
d O
S2
Thus, whenever there exists a phase difference of a between the two interfering beams of light,
conditions of maximas and minimas are interchanged, i.e., x n (for minimum intensity)
and x (2n 1) / 2 (for maximum intensity)
Doppler’s Effect in Light
The phenomenon of apparent change in frequency (or wavelength) of the light due to relative motion
between the source of light and the observer is called Doppler’s effect.
If actual frequency, ' Apparent frequency, v = speed of source w.r.t stationary observer, c = speed of
light
Source of light moves towards the stationary Source of light moves away from the
observer (v << c) stationary observer (v << c)
v v
(i) Apparent frequency 1 and (i) Apparent frequency 1 and
c c
v v
Apparent wavelength 1 Apparent wavelength 1
c c
(ii) Doppler’s shift : Apparent wavelength < actual (ii) Doppler’s shift : Apparent wavelength > actual
wavelength, wavelength,
So spectrum of the radiation from the source of light So spectrum of the radiation from the source of light
shifts towards the red end of spectrum. This is called Red shifts towards the violet end of spectrum. This is called
shift Violet shift
v v
Doppler’s shift Δ . Doppler’s shift Δ .
c c
Note : Doppler’s shift ( ) and time period of rotation (T) of a star relates as 2r ; r = radius of
c T
star.
Applications of Doppler effect
(i) Determination of speed of moving bodies (aeroplane, submarine etc) in RADAR and SONAR.
(ii) Determination of the velocities of stars and galaxies by spectral shift.
(iii) Determination of rotational motion of sun.
10 Wave Optics
(iv) Explanation of width of spectral lines.
(v) Tracking of satellites. (vi) In medical sciences in echo cardiogram, sonography etc.
Concepts
The angular thickness of fringe width is defined as , which is independent of the screen distance D.
D d
Central maxima means the maxima formed with zero optical path difference. It may be formed anywhere on the screen.
All the wavelengths produce their central maxima at the same position.
The wave with smaller wavelength from its maxima before the wave with longer wavelength.
The first maxima of violet colour is closest and that for the red colour is farthest.
Fringes with blue light are thicker than those for red light.
In an interference pattern, whatever energy disappears at the minimum, appears at the maximum.
In YDSE, the nth maxima always comes before the nth minima.
Imax
In YDSE, the ratio is maximum when both the sources have same intensity.
Imin
For two interfering waves if initial phase difference between them is 0 and phase difference due to path difference
2
between them is '. Then total phase difference will be ' 0 .
Sometimes maximm number of maximas or minimas are asked in the question which can be obtained on the screen. For
this we use the fact that value of sin (or cos ) can't be greater than 1. For example in the first case when the slits are
vertical
n
sin (for maximum intensity)
d
n d
sin ≯1 ≯1 or n≯
d
Suppose in some question d/ comes out say 4.6, then total number of maximuas on the screen will be 9. Corresponding to
n 0, 1, 2, 3 and 4 .
Wave front
i i C
B A r
D
r
i i r r
D
A C
Reflection Refraction
Wave Optics 11
BC v1 sin i 2
BC = AD and i = r
AD v 2 sin r 1
Example
s
Example: 1 If two light waves having same frequency have intensity ratio 4 : 1 and they interfere, the ratio of
maximum to minimum intensity in the pattern will be
(a) 9 : 1 (b) 3 : 1 (c) 25 : 9 (d) 16 : 25
2 2
I1 4
1 1
I max I2 1 9
Solution: (a) By using 1.
I min I1
1 4 1
I2 1
Example: 2 In Young’s double slit experiment using sodium light ( = 5898Å), 92 fringes are seen. If given
colour ( = 5461Å) is used, how many fringes will be seen
(a) 62 (b) 67 (c) 85 (d) 99
Solution: (d) By using n1 1 n 2 2 92 5898 n 2 5461 n 2 99
Example: 3 Two beams of light having intensities I and 4I interfere to produce a fringe pattern on a screen. The phase
difference between the beams is at point A and at point B. Then the difference between the resultant
2
intensities at A and B is
(a) 2I (b) 4I (c) 5I (d) 7I
At point A : Resultant intensity I A I 4 I 2 I 4 I cos 5I
2
Example: 4 If two waves represented by y1 4 sin t and y 2 3 sin t interfere at a point, the amplitude of the resulting
3
wave will be about
(a) 7 (b) 6 (c) 5 (d) 3.
Solution: (b) By using A a12 a 22 2a1 a 2 cos A (4 ) 2 (3) 2 2 4 3 cos 37 6 .
3
Example: 5 Two waves being produced by two sources S 1 and S 2 . Both sources have zero phase difference and have
wavelength . The destructive interference of both the waves will occur of point P if (S 1 P S 2 P ) has the
value
3 11
(a) 5 (b) (c) 2 (d)
4 2
Solution: (d) For destructive interference, path difference the waves meeting at P (i.e. S 1 P S 2 P ) must be odd
multiple of /2. Hence option (d) is correct.
12 Wave Optics
Example: 6 Two interfering wave (having intensities are 9I and 4I) path difference between them is 11 . The resultant
intensity at this point will be
(a) I (b) 9 I (c) 4 I (d) 25 I
2
Solution: (d) Path difference 11 22 i.e. constructive interference obtained at the same point
2
I max 144
Example: 7 In interference if then what will be the ratio of amplitudes of the interfering wave
I min 81
144 7 1 12
(a) (b) (c) (d)
81 1 7 9
I max
1 144 1 12 1
a1 I min 81 9 7
Solution: (b) By using 12
a2 I max 144 1
1 1 1
I min 81 5
Example: 8 Two interfering waves having intensities x and y meets a point with time difference 3T/2. What will be the
resultant intensity at that point
xy
(a) ( x y ) (b) ( x y xy ) (c) x y 2 xy (d)
2 xy
T 3T T
Solution: (c) Time difference T.D. 3 ; This is the condition of constructive
2 2 2
interference.
So resultant intensity I R ( I1 I 2 ) 2 ( x y ) 2 x y 2 xy .
Example: 9 In Young’s double-slit experiment, an interference pattern is obtained on a screen by a light of wavelength
6000 Å, coming from the coherent sources S 1 and S 2 . At certain point P on the screen third dark fringe
is formed. Then the path difference S 1 P S 2 P in microns is
(a) 0.75 (b) 1.5 (c) 3.0 (d) 4.5
Solution: (b) For dark fringe path difference (2n 1) ; here n = 3 and = 6000 10–10 m
2
6 10 7
So (2 3 1) 15 10 7 m 1 . 5 microns .
2
Example: 10 In a Young’s double slit experiment, the slit separation is 1 mm and the screen is 1 m from the slit. For a
monochromatic light of wavelength 500 nm, the distance of 3rd minima from the central maxima is
(a) 0.50 mm (b) 1.25 mm (c) 1.50 mm (d) 1.75 mm
(2n 1) D
Solution: (b) Distance of nth minima from central maxima is given as x
2d
(2 3 1) 500 10 9 1
So here x 1 . 25 mm
2 10 3
Example: 11 The two slits at a distance of 1 mm are illuminated by the light of wavelength 6 . 5 10 7 m. The interference fringes are
observed on a screen placed at a distance of 1 m. The distance between third dark fringe and fifth bright fringe will be
Wave Optics 13
1 1D
Solution: (b) Distance between nth bright and mth dark fringe (n > m) is given as x n m n m
2 2 d
1 6 . 5 10 7 1
x 5 3 1 . 63 mm .
2 1 10 3
Example: 12 The slits in a Young’s double slit experiment have equal widths and the source is placed symmetrically relative to the
slits. The intensity at the central fringes is I0. If one of the slits is closed, the intensity at this point will be
(a) I0 (b) I 0 / 4 (c) I 0 / 2 (d) 4 I 0
Solution: (b) By using I R 4 I cos 2 {where I = Intensity of each wave}
2
At central position = 0o, hence initially I0 = 4I.
If one slit is closed, no interference takes place so intensity at the same location will be I only i.e. intensity
1 I
become s th or 0 .
4 4
Example: 13 In double slit experiment, the angular width of the fringes is 0.20° for the sodium light ( = 5890 Å). In order to
increase the angular width of the fringes by 10%, the necessary change in the wavelength is
(a) Increase of 589 Å (b) Decrease of 589 Å (c) Increase of 6479 Å (d) Zero
0 . 20 o 5890 0 . 20 5890
Solution: (a) By using 1 1 2 6479
d 2 2 o
(0 . 20 10 % of 0 . 20 ) 2 0 . 22 2
p
Solution: (a) By using shift x ( 1) t x 10
(1 . 5 1) 2 10 6 2
5000 10
Since the sheet is placed in the path of the first wave, so shift will be 2 fringes upward.
Example: 17 In a YDSE fringes are observed by using light of wavelength 4800 Å, if a glass plate ( = 1.5) is introduced
in the path of one of the wave and another plates is introduced in the path of the ( = 1.8) other wave. The
central fringe takes the position of fifth bright fringe. The thickness of plate will be
(a) 8 micron (b) 80 micron (c) 0.8 micron (d) None of these
Solution: (a) Shift due to the first plate x 1 ( 1 1) t (Upward)
1
and shift due to the second x 2 ( 2 1) t (Downward) S1
2
d C
Hence net shift = x2 – x1 ( 2 1 ) t S2
Screen
5p (1 . 8 1 . 5 ) t D
5 5 4800 10 10
t 8 10 6 m 8 micron .
0 .3 0 .3
d
Example: 18 In young double slit experiment 10 4 (d = distance between slits, D = distance of screen from the
D
slits). At a point P on the screen resulting intensity is equal to the intensity due to individual slit I0. Then
the distance of point P from the central maxima is ( = 6000 Å)
(a) 2 mm (b) 1 mm (c) 0.5 mm (d) 4 mm
1 2
Solution: (a) By using shift I 4 I 0 cos 2 ( / 2) I 0 4 I 0 cos 2 ( / 2) cos( / 2) or
2 2 3 3
10
xd d 6000 10 2
Also path difference x x 2 10 3 m 2mm .
D 2 D
2 3
Example: 19 Two identical radiators have a separation of d = /4, where is the wavelength of the waves emitted by
either source. The initial phase difference between the sources is /4. Then the intensity on the screen at a
distance point situated at an angle = 30o from the radiators is (here I0 is the intensity at that point due to
one radiator)
(a) I0 (b) 2I0 (c) 3I0 (d) 4I0
2
Solution: (a) Initial phase difference 0 ; Phase difference due to path difference ' ()
4
2 2
where d sin ' (d sin ) (sin 30 o )
4 4
/ 2
Hence total phase difference 0 ' . By using I 4 I 0 cos 2 ( / 2) 4 I 0 cos 2 2 I0 .
4 2
Example: 20 In YDSE a source of wavelength 6000 Å is used. The screen is placed 1 m from the slits. Fringes formed on
the screen, are observed by a student sitting close to the slits. The student's eye can distinguish two
neighbouring fringes. If they subtend an angle more than 1 minute of arc. What will be the maximum
distance between the slits so that the fringes are clearly visible
(a) 2.06 mm (b) 2.06 cm (c) 2.06 10–3 mm (d) None of these
Wave Optics 15
Solution: (a) According to given problem angular fringe width [As 1' rad ]
d 180 60 180 60
6 10 7 180 60
i.e. d i.e. d 2 . 06 10 3 m d max 2 . 06 mm
Example: 21 the maximum intensity in case of interference of n identical waves, each of intensity I0, if the interference
is (i) coherent and (ii) incoherent respectively are
(a) n 2 I 0 , nI 0 (b) nI 0 , n 2 I 0 (c) nI 0 , I 0 (d) n 2 I 0 , (n 1)I 0
(i) In case of coherent interference does not vary with time and so I will be maximum when
cos max 1
i.e. (I max ) co I1 I 2 2 I1 I 2 ( I1 I 2 ) 2
(ii)In case of incoherent interference at a given point, varies randomly with time, so (cos )av 0 and
hence (I R ) Inco I1 I 2
Example: 23 A star is moving towards the earth with a speed of 4 .5 10 6 m / s . If the true wavelength of a certain line in
the spectrum received from the star is 5890 Å, its apparent wavelength will be about [c 3 10 8 m / s]
v 4 . 5 10 6
Solution: (c) By using ' 1 ' 5890 1 5802 Å .
c 3 10 8
Example: 24 Light coming from a star is observed to have a wavelength of 3737 Å, while its real wavelength is 3700 Å.
The speed of the star relative to the earth is [Speed of light 3 10 8 m / s ]
(a) 3 10 5 m / s (b) 3 10 6 m / s (c) 3 .7 10 7 m / s (d) 3 .7 10 6 m / s
v v
Solution: (b) By using (3737-3700)= 3700 v 3 10 6 m / s .
c 3 10 8
Example: 25 Light from the constellation Virgo is observed to increase in wavelength by 0.4%. With respect to Earth
the constellation is
(a) Moving away with velocity 1 . 2 10 6 m / s (b) Coming closer with velocity 1 . 2 10 6 m / s
(c) Moving away with velocity 4 10 6 m / s (d) Coming closer with velocity 4 10 6 m / s
16 Wave Optics
v 0 .4 0 .4 v
Solution: (a) By using ; where and c = 3 108 m/s v = 1.2 106 m/s
c 100 100 3 10 8
Since wavelength is increasing i.e. it is moving away.
Tricky example: 1
In YDSE, distance between the slits is 2 10–3 m, slits are illuminated by a light of wavelength
2000Å –9000 Å. In the field of view at a distance of 10–3 m from the central position which
wavelength will be observe. Given distance between slits and screen is 2.5 m
(a) 40000 Å (b) 4500 Å (c) 5000 Å (d) 5500 Å
n D xd 10 3 2 10 3 8 10 7 8000
Solution : (b) x m Å
d nD n 2 .5 n n
8000
For n = 1, 2, 3....... = 8000 Å, 4000 Å, Å .........
3
Hence only option (a) is correct.
Tricky example: 2
I is the intensity due to a source of light at any point P on the screen. If light reaches the point P via
two different paths (a) direct (b) after reflection from a plane mirror then path difference between
two paths is 3/2, the intensity at P is
(a) I (b) Zero (c) 2I (d) 4I
Solution : (d) Reflection of light from plane mirror gives additional path difference of /2 between two waves
3
Total path difference 2
2 2
Tricky example: 3
I 9I I 9
Solution : (d) From figure I1 and I 2 2
4 64 I1 16
B B Optics 17
Wave
I I /4 9I /64
I2
1 9 1 A A 3I /64
I I1 16 49
By using max 1
I min I2 9 3I /4 3I /16
1 1
I1 16
Fresnel's Biprism.
(1) It is an optical device of producing interference of light Fresnel's biprism is made by joining base to
base two thin prism (A1BC and A2BC as shown in the figure) of very small angle or by grinding a thick glass
plate.
(2) Acute angle of prism is about 1/2o and obtuse angle of prism is about 179o.
(3) When a monochromatic light source is kept in front of biprism two coherent virtual source S1 and S2 are
produced.
(4) Interference fringes are found on the screen (in the MN region) placed behind the biprism interference
fringes are formed in the limited region which can be observed with the help eye piece.
(5) Fringe width is measured by a micrometer attached to the eye piece. Fringes are of equal width and its
D d
value is
d D
A1
S1
M
d
S
C B
N
S2
A2
a b
D
Let the separation between S1 and S2 be d and the distance of slits and the screen from the biprism be a
and b respectively i.e. D = (a + b). If angle of prism is and refractive index is then d 2 a( 1)
[2 a ( 1) ] (a b )
(a b ) 2 a( 1)
18 Wave Optics
Diffraction of Light.
It is the phenomenon of bending of light around the corners of an obstacle/aperture of the size of the
wavelength of light.
Shadow
Light
Light Shadow
Aperture Obstacle
(1) Types of diffraction : The diffraction phenomenon is divided into two types
Source Source
Screen Screen
at
Slit Slit
(2) Diffraction of light at a single slit : In case of diffraction at a single slit, we get a central bright
band with alternate bright (maxima) and dark (minima) bands of decreasing intensity as shown
Wave Optics 19
P I
x
x + x
S1
d O
S2 d sin 3 2 2 3
d d d d d d
D Screen
Slit
2 D 2
(i) Width of central maxima 0 ; and angular width
d d
(ii) Minima occurs at a point on either side of the central maxima, such that the path difference between
the waves from the two ends of the aperture is given by n ; where n 1, 2, 3 ....
n
i.e. d sin n sin
d
(iii) The secondary maxima occurs, where the path difference between the waves from the two ends of the
aperture is given by (2n 1) ; where n 1, 2, 3 ....
2
(2n 1)
i.e. d sin (2n 1) sin
2 2d
(3) Comparison between interference and diffraction
Interference Diffraction
Results due to the superposition of waves from two Results due to the superposition of wavelets from
coherrent sources. different parts of same wave front. (single coherent
source)
D All secondary fringes are of same width but the
All fringes are of same width
d central maximum is of double the width
D
0 2 2
d
All fringes are of same intensity Intensity decreases as the order of maximum
increases.
Intensity of all minimum may be zero Intensity of minima is not zero.
Positions of nth maxima and minima Positions of nth secondary maxima and minima
n D D D n D
x n(Bright) , x n (Dark) (2n 1) x n (Bright) (2n 1) , x n (Dark)
d d d d
Path difference for nth maxima n
for nth secondary maxima (2n 1)
2
Path difference for nth minima (2n 1) Path difference for nth minima n
(4) Diffraction and optical instruments : The objective lens of optical instrument like telescope or
microscope etc. acts like a circular aperture. Due to diffraction of light at a circular aperture, a converging lens
20 Wave Optics
cannot form a point image of an object rather it produces a brighter disc known as
Airy disc surrounded by alternate dark and bright concentric rings.
1 . 22
The angular half width of Airy disc (where D = aperture of lens)
D
The lateral width of the image f (where f = focal length of the lens)
Note : Diffraction of light limits the ability of optical instruments to form
clear images of objects when they are close to each other.
(5) Diffraction grating : Consists of large number of equally spaced parallel slits. If light is incident
normally on a transmission grating, the diffraction of principle maxima (PM) is given by d sin n ; where d
= distance between two consecutive slits and is called grating element.
Light
II I PM Central I PM II PM
PM maxima
R2 V2 R1 V1 V1 R1 V2 R2
Polarisation of Light
Light propagates as transverse EM waves. The magnitude of electric field is much larger as compared to
magnitude of magnetic field. We generally prefer to describe light as electric field oscillations.
(1) Unpolarised light
The light having electric field oscillations in all directions in the plane perpendicular to the direction of
propagation is called Unpolarised light. The oscillation may be resolved into horizontal and vertical
component.
Direction of
propagation
It is a thin film of ultramicroscopic crystals of quinine idosulphate with their optic axis parallel to each
other.
Polaroid
(i) Polaroids allow the light oscillations parallel to the transmission axis pass through them.
(ii) The crystal or polaroid on which unpolarised light is incident is called polariser. Crystal or polaroid on
which polarised light is incident is called analyser.
P A P A
No light
Ordinary light Polarised light Polarised light Ordinary light Polarised light
Transmission axes of the polariser and analyser are parallel to Transmission axis of the analyser is perpendicular to the
each other, so whole of the polarised light passes through analyser polariser, hence no light passes through the analyser
Note : When unpolarised light is incident on the polariser, the intensity of the transmitted polarised
light is half the intensity of unpolarised light.
(4) Malus law
This law states that the intensity of the polarised light transmitted through the analyser varies as the
square of the cosine of the angle between the plane of transmission of the analyser and the plane of the
polariser.
Intensity = I0
P Amplitude = A0 A
Ii Intensity = I
Amplitude = A
I0 A
If 0 o , I I 0 , A A 0 , If 45 o , I , A 0 , If 90 o , I 0 , A 0
2 2
(ii) If Ii Intensity of unpolarised light.
22 Wave Optics
Ii
So I 0 i.e. if an unpolarised light is converted into plane polarised light (say by passing it through a
2
I
plaroid or a Nicol-prism), its intensity becomes half. and I i cos 2
2
(5) Brewster’s law : Brewster discovered that when a beam of unpolarised light is reflected from a
transparent medium (refractive index =), the reflected light is completely plane polarised at a certain angle of
incidence (called the angle of polarisation p ).
Unpolarised Plane
light polarised light
Also tan p Brewster’s law P P
Substance
The optical activity of a substance is related to the asymmetry of the molecule or crystal as a whole, e.g., a
solution of cane-sugar is dextro-rotatory due to asymmetrical molecular structure while crystals of quartz are
dextro or laevo-rotatory due to structural asymmetry which vanishes when quartz is fused.
Optical activity of a substance is measured with help of polarimeter in terms of 'specific rotation' which is
defined as the rotation produced by a solution of length 10 cm (1 dm) and of unit concentration (i.e. 1 g/cc) for
a given wavelength of light at a given temperature. i.e. [ ]t o C where is the rotation in length L at
LC
concentration C.
Wave Optics 23
Assignment
Nature of light and interference of light
(a) (2n 1) (b) (2n 1) (c) n (d) (2n 1)
4 2 2
20. In a wave, the path difference corresponding to a phase difference of is
(a) (b) (c) (d)
2 2
21. A beam of monochromatic blue light of wavelength 4200Å in air travels in water, its wavelength in water will be
(a) 2800Å (b) 5600Å (c) 3150Å (d) 4000Å
22. Wave front originating from a point source is
(a) Cylindrical (b) Spherical (c) Plane (d) Cubical
23. Waves that can not be polarised are
(a) Transverse waves (b) Longitudinal waves (c) Light waves (d) Electromagnetic waves
24. According to Huygen’s wave theory, point on any wave front may be regarded as
(a) A photon (b) An electron (c) A new source of wave (d) Neutron
25. The light produced by a laser is all the following except
(a) Incoherent (b) Monochromatic
(c) In the form of a narrow beam (d) Electromagnetic
26. The phenomena of interference is shown by
(a) Longitudinal mechanical waves only (b) Transverse mechanical waves only
(c) Electromagnetic waves only (d) All the above types of waves
27. If the ratio of amplitude of two waves is 4 : 3, then the ratio of maximum and minimum intensity is
26 Wave Optics
37. In Huygen’s wave theory, the locus of all points in the same state of vibration is called
(a) A half period zone (b) Vibrator (c) A wavefront (d) A ray
38. The idea of the quantum nature of light has emerged in an attempt to explain
(a) Interference (b) Diffraction
(c) Radiation spectrum of a black body (d) Polarisation
39. The necessary condition for an interference by two source of light is that the
(a) Two monochromatic sources should be of same amplitude but with a constant phase
(b) Two sources should be of same amplitude
(c) Two point sources should have phase difference varying with time
(d) Two sources should be of same wavelength
40. If the intensity of the waves observed by two coherent sources is I. Then the intensity of resultant waves in constructive
interference will be
(a) 2I (b) 4I (c) I (d) None of these
Wave Optics 27
41. In figure, a wavefront AB moving in air is incident on a plane glass surface xy. Its position CD after refraction through a glass
slab is shown also along with normals drawn at A and D. the refractive index of glass with respect to air will be equal to
sin B
(a)
sin
sin D
(b) x y
sin A
(c) (BD/AC) C
(d) (AB/CD)
42. Four independent waves are expressed as
(i) y1 a1 sin t (ii) y 2 a2 sin 2t (iii) y 3 a3 cos t (iv) y 4 a4 sin(t / 3)
The interference is possible between
(a) (i) and (ii) (b) (i) and (iv) (c) (iii) and (iv) (d) Not possible at all
43. Colour of light is known by its
(a) Velocity (b) Amplitude (c) Frequency (d) Polarisation
44. Laser light is considered to be coherent because it consists of
(a) Many wavelengths (b) Uncoordinated wavelengths
(c) Coordinated waves of exactly the same wavelength (d) Divergent beams
45. A laser beam may be used to measure very large distances because
(a) It is unidirectional (b) It is coherent (c) It is monochromatic (d) It is not absorbed
46. Interference patterns are not observed in thick films, because
(a) Most of the incident light intensity is observed within the film
(b) A thick film has a high coefficient of reflection
(c) The maxima of interference patterns are far from the minima
(d) There is too much overlapping of colours washing out the interference pattern
47. Phenomenon of interference is not observed by two sodium lamps of same power. It is because both waves have
(a) Not constant phase difference (b) Zero phase difference
(c) Different intensity (d) Different frequencies
Basic Level
48. In a Young’s double slit experiment, the separation between the two slits is 0.9 mm and the fringes are observed one metre away.
If it produces the second dark fringe at a distance of 1 mm from the central fringe, the wavelength of monochromatic source of
light used is
(c) The fringe width remains the same but the pattern shifts
(a) Increases (b) Decreases (c) Becomes unequal (d) Remains constant
57. In Young’s double slit experiment, the intensity of light coming from the first slit is double the intensity from the second slit. The
ratio of the maximum intensity to the minimum intensity on the interference fringe pattern observed is
(a) Fringe will appear for a moment then it will disappear (b) Fringes will occur as from monochromatic light
(c) Only bright fringes will appear (d) No fringes will appear
74. When a thin metal plate is placed in the path of one of the interfering beams of light
(a) Fringe width increases (b) Fringes disappear (c) Fringes become brighter (d) Fringes become blurred
75. What happens by the use of white light in Young’s double slit experiment
(a) Will be blue (b) Will be yellow (c) Will be green (d) Will not be formed
78. Two sources give interference pattern which is observed on a screen. D distance apart from the sources. The fringe width is 2w. If
the distance D is now doubled, the fringe width will
(a) Become w/2 (b) Remain the same (c) Become w (d) Become 4w
79. In Young’s double slit experiment, angular width of fringes is 0.20° for sodium light of wavelength 5890 Å. If complete system is
dipped in water, then angular width of fringes becomes
(a) 0.11° (b) 0.15° (c) 0.22° (d) 0.30°
80. In two separate set-ups of the Young’s double slit experiment, fringes of equal width are observed when lights of wavelengths in
the ratio 1 : 2 are used. If the ratio of the slit separation in the two cases is 2 : 1, the ratio of the distances between the plane of the
slits and the screen in the two set-ups is
(a) 4 : 1 (b) 1 : 1 (c) 1 : 4 (d) 2 : 1
81. In a Young’s double slit experiment, the central point on the screen is
(a) Bright (b) Dark (c) First bright and then dark (d) First dark and then bright
82. In Young’s double slit experiment, the distance between sources is 1 mm and distance between the screen and source is 1m. If the
fringe width on the screen is 0.06 cm, then =
(a) 6000 Å (b) 4000 Å (c) 1200 Å (d) 2400 Å
83. In a Young’s double slit experiment, the distance between two coherent sources is 0.1 mm and the distance between the slits and
the screen is 20 cm. If the wavelength of light is 5460 Å then the distance between two consecutive maxima is
(a) 0.5 mm (b) 1.1 mm (c) 1.5 mm (d) 2.2 mm
84. If a thin mica sheet of thickness t and refractive index (5 / 3) is placed in the path of one of the interfering beams as shown in
figure, then the displacement of the fringe system is
Dt
(a)
3d P
t
Dt S1
(b)
5d
2d
Dt S2
(c)
4d D
2 Dt
(d)
5d
85. In a double slit experiment, the first minimum on either side of the central maximum occurs where the path difference between
the two paths is
(a) (b) (c) (d) 2
4 2
86. In Young’s double slit experiment, the phase difference between the light waves reaching third bright fringe from the central
fringe will be ( = 6000 Å)
(a) Zero (b) 2 (c) 4 (d) 6
7
87. Sodium light ( 6 10 m ) is used to produce interference pattern. The observed fringe width is 0.12 mm. The angle between
the two interfering wave trains is
(a) 5 10 1 rad (b) 5 10 3 rad (c) 1 10 2 rad (d) 1 10 3 rad
88. The contrast in the fringes in any interference pattern depends on
(a) Fringe width (b) Intensity ratio of the sources
(c) Distance between the slits (d) Wavelength
Wave Optics 31
89. In Young’s double slit experiment, carried out with light of wavelength = 5000 Å, the distance between the slits is 0.2 mm and
the screen is at 200 cm from the slits. The central maximum is at x = 0. The third maximum (taking the central maximum as
zeroth maximum) will be at x equal to
(a) 1.67 cm (b) 1.5 cm (c) 0.5 cm (d) 5.0 cm
90. In a Young’s experiment, two coherent sources are placed 0.90 mm apart and the fringes are observed one metre away. If it
produces the second dark fringe at a distance of 1 mm from the central fringe, the wavelength of monochromatic light used would
be
(c) The fringe width will not change (d)The fringe width will become 2 times
97. In Young’s experiment, if the distance between screen and the slit aperture is increased the fringe width will
(a) Decrease (b) Increases but intensity will decrease
(c) Increase but intensity remains unchanged (d) Remains unchanged but intensity decreases
98. In Fresnel’s biprism experiment, the two coherent sources are
(a) Real (b) Imaginary
(c) One is real and the other is imaginary (d) None of these
99. In Fresnel’s experiment, the width of the fringe depends upon the distance
(a) Between the prism and the slit aperture
(b) Of the prism from the screen
(c) Of screen from the imaginary light sources
(d) Of the screen from the prism and the distance from the imaginary sources
100. In the Young’s double slit experiment, the ratio of intensities of bright and dark fringes is 9. This means that
(a) The intensities of individual sources are 5 and 4 units respectively
(b) The intensities of individual sources are 4 and 1 units respectively
(c) The ratio of their amplitudes is 3
(d) The ratio of their amplitudes is 2
101. The figure below shows a double slit experiment. P and Q are the slits. The path lengths PX and QX are n and (n + 2)
respectively where n is a whole number and is the wavelength. Taking the central bright fringe as zero, what is formed at X
32 Wave Optics
n X
(a) First bright
P
(n+2)
(b) First dark
(c) Second bright Q
Screen
(d) Second dark
102. A plate of thickness t made of a material of refractive index is placed in front of one of the slits in a double slit experiment.
What should be the minimum thickness t which will make the intensity at the centre of the fringe pattern zero
(a) ( 1) (b) ( 1) (c) (d)
2 2( 1) ( 1)
3
103. The thickness of a plate (refractive index for light of wavelength ) which will introduce a path difference of is
4
3 3 3
(a) (b) (c) (d)
4 ( 1) 2( 1) 2( 1) 4
Advance Level
104. In the Young’s double slit experiment, if the phase difference between the two waves interfering at a point is , the intensity at
that point can be expressed by the expression (where A + B depends upon the amplitude of the two waves)
A
(a) I A 2 B 2 cos 2 (b) I cos (c) I A B cos / 2 (d) I A B cos
B
105. In the adjacent diagram CP represents wavefronts and AO and BP the corresponding two rays. Find the condition on for
constructive interference at P between the ray BP and reflected ray OP
O
Q R
(a) cos 3 / 2 d
C
d
(b) cos / 4 d
A
(c) sec cos / d
P
(d) sec cos 4 / d B
106. When one of the slits of Young’s experiment is covered with a transparent sheet of thickness 4.8 mm, the central fringe shifts to a
position originally occupied by the 30th bright fringe. What should be the thickness of the sheet if the central fringe has to shift to
the position occupied by 20th bright fringe
(a) 3.8 mm (b) 1.6 mm (c) 7.6 mm (d) 3.2 mm
107. In the ideal double-slit experiment, when a glass-plate (refractive index 1.5) of thickness t is introduced in the path of one of the
interfering beams (wavelength ), the intensity at the position where the central maximum occurred previously remains
unchanged. The minimum thickness of the glass-plate is
2
(a) 2 (b) (c) (d)
3 3
108. In an interference arrangement similar to Young’s double slit experiment, the slits S 1
S1
and S 2 are illuminated with coherent microwave sources each of frequency 106 Hz. The
d/2
sources are synchronized to have zero phase difference. The slits are separated by
distance d = 150 m. The intensity I() is measured as a function of , where is defined d/2
as shown. If I0 is maximum intensity, then I() for 0 90 is given by S2 [IIT-JEE 1995]
(a) 6 10 6 m Q
S1 B
6
(b) 6 . 6 10 m O
7 S2
(c) 3 . 138 10 m
Slit P
(d) 3 .144 10 7 m
112. In Young’s double slit experiment, the two slits act as coherent sources of equal amplitude A and wavelength . In another
experiment with the same set up the two slits are of equal amplitude A and wavelength but are incoherent. The ratio of the
intensity of light at the mid-point of the screen in the first case to that in the second case is
(a) 1 : 2 (b) 2 : 1 (c) 4 : 1 (d) 1 : 1
113. When light of wavelength falls on a thin film of thickness t and refractive index n, the essential condition for the production of
constructive interference fringes by the rays A and B are (m = 1, 2, 3, ……)
1 A
(a) 2nt cos r m
2 B
I0 3 I0
(a) (b) I0 (c) I0 (d)
2 4 4
117. A monochromatic beam of light falls on YDSE apparatus at some angle (say ) as shown in figure. A thin sheet of glass is inserted
in front of the lower slit S2. The central bright fringe (path difference = 0) will be obtained
34 Wave Optics
S1
(a) At O O
S2
(b) Above O
(c) Below O
(d) Anywhere depending on angle , thickness of plate t and refractive index of glass
118. In Young's double slit experiment how many maximas can be obtained on a screen (including the central maximum) on both
sides of the central fringe if 2000 Å and d 7000 Å
(a) 12 (b) 7 (c) 18 (d) 4
119. Young's double slit experiment is made in a liquid. The 10th bright fringe in liquid lies where 6th dark fringe lies in vacuum. The
refractive index of the liquid is approximately
(a) 1.8 (b) 1.54 (c) 1.67 (d) 1.2
120. Light of wavelength 0 in air enters a medium of refractive index n. If two points A and B in this medium lie along the path of
this light at a distance x, then phase difference 0 between these two points is
1 2 2 2 1 2
(a) 0 x (b) 0 n x (c) 0 (n 1) x (d) 0 x
n 0
0
0
(n 1) 0
121. In a Young's double slit experiment, the slits are 2 mm apart and are illuminated with a mixture of two wavelength 0 750 nm
and 900 nm . The minimum distance from the common central bright fringe on a screen 2m from the slits where a bright
fringe from one interference pattern coincides with a bright fringe from the other is
(a) 1.5 mm (b) 3 mm (c) 4.5 mm (d) 6 mm
122. In the ideal double slit experiment, when a glass plate (refractive index 1.5) of thickness t is introduced in the path of one of the
interfering beams (wavelength ), the intensity at the position where the central maximum occurred previously remains
unchanged. The minimum thickness of the glass plate is
2
(a) 2 (b) (c) (d)
3 3
123. Two wavelengths of light 1 and 2 are sent through a Young's double slit apparatus simultaneously. If the third order 1 bright
fringe coincides with the fourth order 2 bright fringe then
1 4 1 3 1 5 1 4
(a) (b) (c) (d)
2 3 2 4 2 4 2 5
124. A flake of glass (refractive index 1.5) is placed over one of the openings of a double slit apparatus. The interference pattern
displaces itself through seven successive maxima towards the side where the flake is placed. if wavelength of the diffracted light is
600 nm , then the thickness of the flake is
(a) 2100 nm (b) 4200 nm (c) 8400 nm (d) None of these
125. In a double slit experiment, instead of taking slits of equal widths, one slit is made twice as wide as the other. Then in the interference
pattern
(a) The intensitites of both the maxima and the minima increase
(b) The intensity of the maxima increases and minima has zero intensity
(c) The intensity of the maxima decreases and that of minima increases
(d) The intensity of the maxima decreases and the minima has zero intensity
126. In Young's experiment the wavelength of red light is 7800 Å and that of blue light is 5200 Å. The value of n for which the (n 1)th
blue bright band coincides with the nth red band is
(a) 4 (b) 3 (c) 2 (d) 1
127. In a double slit experiment if 5th dark fringe is formed opposite to one of the slits, the wavelength of light is
d2 d2 d2 d2
(a) (b) (c) (d)
6D 5D 15 D 9D
128. In a Young's double slit experiment one of the slits is advanced towards the screen by a distance d / 2 and d n where n is an
odd integer and d is the initial distance between the slits. If I0 is the intensity of each wave from the slits, the intensity at O is
(a) I0
S2
S
O
S1
Wave Optics 35
I0
(b)
4
(c) 0
(d) 2I0
129. Two ideal slits S 1 and S 2 are at a distance d apart, and illuminated by light of wavelength passing through an ideal source slit
S placed on the line through S 2 as shown. The distance between the planes of slits and the source slit is D. A screen is held at a
distance D from the plane of the slits. The minimum value of d for which there is darkness at O is
3 D
(a)
2 S1
(b) D S O
S2
D
(c)
2
D D
(d) 3 D
130. In a double slit experiment interference is obtained from electron waves produced in an electron gun supplied with voltage V. if
is the wavelength of the beam, D is the distance of screen, d is the spacing between coherent source, h is Planck’s constant, e is
charge on electron and m is mass of electron then fringe width is given as
hD 2 hD hd 2 hd
(a) (b) (c) (d)
2meV d meV d 2meV D meV D
131. In a double slit arrangement fringes are produced using light of wavelength 4800 Å. One slit is covered by a thin plate of glass of
refractive index 1.4 and the other with another glass plate of same thickness but of refractive index 1.7. By doing so the central
bright shifts to original fifth bright fringe from centre. Thickness of glass plate is
(a) 8 m (b) 6 m (c) 4 m (d) 10 m
132. Two point sources X and Y emit waves of same frequency and speed but Y lags in phase behind X by 2l radian. If there is a
maximum in direction D the distance XO using n as an integer is given by
D
(a) (n l)
2 O
(b) (n l)
X
(c) (n l)
2
Y
(d) (n l)
133. A student is asked to measure the wavelength of monochromatic light. He sets up the apparatus sketched below. S 1 , S 2 , S 3 are
narrow parallel slits, L is a sodium lamp and M is a micrometer eye-piece. The student fails to observe interference fringes. You
would advise him to
(a) Increase the width of S 1 S2
L S1 5 cm M
(b) Decrease the distance between S 2 and S 3
S3
(c) Replace L with a white light source
(d) Replace M with a telescope 10 cm 60
cm
134. A beam with wavelength falls on a stack of partially reflecting planes with separation d. The angle that the beam should make
with the planes so that the beams reflected from successive planes may interfere constructively is (where n =1, 2, ……)
n
(a) sin 1
d
n
(b) tan 1
d
d
36 Wave Optics
n
(c) sin 1
2d
n
(d) cos 1
2d
135. In a double slit experiment the source slit S is at a distance D1 and the screen at a distance D2 from the plane of ideal slit cuts
S 1 and S 2 as shown. If the source slit is shifted to by parallel to S 1 S 2 , the central bright fringe will be shifted by
(a) y
(b) – y S
S1
D2 y
(c) y O
D1 S2
D1 D2
D2
(d) y
D1
136. A parallel beam of monochromatic light is used in a Young’s double slit experiment. The slits are separated by a distance d and
the screen is placed parallel to the plane of the slits. The angle which the incident beam must make with the normal to the plane
of the slits to produce darkness at the position of central brightness is
(a) cos 1
d
2 S1
(b) cos 1
d
(c) sin 1 S2
d
(d) sin 1
2d
137. In a Young’s double slit experiment, let be the fringe width, and let I0 be the intensity at the central bright fringe. At a distance x
from the central bright fringe, the intensity will be
x x x I x
(a) I0 cos (b) I0 cos 2 (c) I0 cos 2 (d) 0 cos 2
4
138. In Young’s double slit experiment the distance d between the slits S 1 and S 2 is 1 mm. What should be the width of each slit be so
as to obtain 10 maxima of the two slit interference pattern with in the central maximum of the single slit diffraction pattern
(a) 0.1 mm (b) 0.2 mm (c) 0.3 mm (d) 0.4 mm
Diffraction of light
139. When light is incident on a diffraction grating the zero order principal maximum will be
(a) One of the component colours (b) Absent
(c) Spectrum of the colours (d) White
140. A beam of light of wavelength 600 nm from a distant source falls on a single slit 1 mm wide and the resulting diffraction pattern
is observed on a screen 2 m away. The distance between the first dark fringes on either side of the central bright fringe is
(a) 1.2 mm (b) 1.2 cm (c) 2.4 cm (d) 2.4 mm
141. Consider the following statements
Assertion (A): When a tiny circular obstacle is placed in the path of light from some distance, a bright spot is seen at the centre
of the shadow of the obstacle.
Reason (R) : Destructive interference occurs at the centre of the shadow.
Of these statements
(a) Both A and R are true and R is a correct explanation of A (b) Both A and R are true but R is not a correct explanation of
A
(c) A is true but R is false (d) A is false but R is true
(e) Both A and R are false
Wave Optics 37
142. The light of wavelength 6328 Å is incident on a slit of width 0.2 mm perpendicularly situated at a distance of 9 m and the central
maxima between two minima, the angular is approximately
(a) 0.36° (b) 0.18° (c) 0.72° (d) 0.08°
143. A diffraction pattern is obtained using a beam of red light. What happens if the red light is replaced by blue light
(a) No change (b) diffraction bands become narrower and crowded together
(c) Bands become broader and farther apart (d) Bands disappear
144. Angular width () of central maximum of a diffraction pattern on a single slit does not depend upon
(a) Distance between slit and source (b) Wavelength of light used
(c) Width of the slit (d) Frequency of light used
145. In order to see diffraction the thickness of the film is
(a) 100 Å (b) 10,000 Å (c) 1 mm (d) 1 cm
146. What will be the angle of diffracting for the first minimum due to Fraunhoffer diffraction with sources of light of wave length 550
nm and slit of width 0.55 mm
(a) 0.001 rad (b) 0.01 rad (c) 1 rad (d) 0.1 rad
147. The bending of beam of light around corners of obstacles is called
3 3
(a) a sin (b) a cos (c) a sin (d) a sin
2 2 2
150. A slit of size 0.15 cm is placed at 2.1 m from a screen. On illuminated it by a light of wavelength 5 10 5 cm . The width of
diffraction pattern will be
(a) 70 mm (b) 0.14 mm (c) 1.4 cm (d) 0.14 cm
151. Yellow light is used in a single slit diffraction experiment with a slit of 0.6 mm. If yellow light is replaced by x-rays, than the
observed pattern will reveal
(a) That the central maxima is narrower (b) More number of fringes
(c) Less number of fringes (d) No diffraction pattern
152. A parallel monochromatic beam of light is incident normally on a narrow slit. A diffraction pattern is formed on a screen placed
perpendicular to the direction of incident beam. At the first maximum of the diffraction pattern the phase difference between the
rays coming from the edges of the slit is
(a) 0 (b) (c) (d) 2
2
153. Diffraction and interference of light suggest
(a) Nature of light is electro-magnetic (b) Wave nature
(c) Nature is quantum (d) Nature of light is transverse
154. A light wave is incident normally over a slit of width 24 10 5 cm . The angular position of second dark fringe from the central
maxima is 30o. What is the wavelength of light
(a) 6000 Å (b) 5000 Å (c) 3000 Å (d) 1500 Å
155. A beam of light of wavelength 600 nm from a distant source falls on a single slit 1.00 nm wide and the resulting diffraction
pattern is observed on a screen 2 m away. The distance between the first dark fringes on either side of the central bright fringe is
(a) 1.2 cm (b) 1.2 mm (c) 2.4 cm (d) 2.4 mm
156. A parallel beam of monochromatic light of wavelength 5000 Å is incident normally on a single narrow slit of width 0.001 mm.
The light is focused by a convex lens on a screen placed on the focal plane. The first minimum will be formed for the angle of
diffraction equal to
(a) 0o (b) 15o (c) 30o (d) 60o
38 Wave Optics
157. Light appears to travel in straight lines since
(a) It is not absorbed by the atmosphere (b) It is reflected by the atmosphere
(c) It's wavelength is very small (d) It's velocity is very large
158. The condition for observing Fraunhofer diffraction from a single slit is that the light wavefront incident on the slit should be
O A B C
The diffracted images A, B and C correspond to the first, second and third order diffraction when the source is replaced by an
another source of shorter wavelength
(a) All the four shift in the direction C to O (b) All the four will shift in the direction O to C
(c) The images C, B and A will shift toward O (d) The images C, B and A will shift away from O
160. To observe diffraction the size of an obstacle
(a) Should be of the same order as wavelength (b) Should be much larger than the wavelength
(c) Have no relation to wavelength (d) Should be exactly
2
161. The first diffraction minima due to a single slit diffraction is at 30 o for a light of wavelength 5000 Å. The width of the slit is
168. A parallel monochromatic beam of light is incident at an angle to the normal of a slit of width e. The central point O of the
screen will be dark if
(a) e sin n where n = 1, 3, 5 ... S1
(b) e sin n where n = 1, 2, 3 ... O
S2
(c) e sin (2n 1) / 2 where n = 1, 2, 3 ......
Polarization of Light
169. The angle of incidence at which reflected light is totally polarized for reflection from air to glass (refraction index n) is
1 1
(a) sin 1 (n) (b) sin 1 (c) tan 1 (d) tan 1 (n)
n n
170. Through which character we can distinguish the light waves from sound waves
(a) Interference (b) Refraction (c) Polarisation (d) Reflection
171. Which of following can not be polarised
(a) Radio waves (b) Ultraviolet rays (c) Infrared rays (d) Ultrasonic waves
172. A polaroid is placed at 45o to an incoming light of intensity I0 . Now the intensity of light passing through polaroid after
polarisation would be
(a) I0 (b) I0 / 2 (c) I0 / 4 (d) Zero
173. Plane polarised light is passed through a polaroid. On viewing through the polaroid we find that when the polariod is given one
complete rotation about the direction of the light, one of the following is observed
(a) The intensity of light gradually decreases to zero and remains at zero
(b) The intensity of light gradually increases to a maximum and remains at maximum
(c) There is no change in intensity
(d) The intensity of light is twice maximum and twice zero
174. Out of the following statements which is not correct
(a) When unpolarised light passes through a Nicol's prism, the emergent light is elliptically polarised
(b) Nicol's prism works on the principle of double refraction and total internal reflection
(c) Nicol's prism can be used to produce and analyse polarised light
(d) Calcite and Quartz are both doubly refracting crystals
175. A ray of light is incident on the surface of a glass plate at an angle of incidence equal to Brewster's angle . If represents the
refractive index of glass with respect to air, then the angle between reflected and refracted rays is
(a) 90 (b) sin 1 ( cos ) (c) 90o (d) 90 o sin 1 (sin / )
176. Figure represents a glass plate placed vertically on a horizontal table with a beam of unpolarised light falling on its surface at the
polarising angle of 57o with the normal. The electric vector in the reflected light on screen S will vibrate with respect to the plane
of incidence in a [CPMT 1988]
A B
N
(a) The intensity is reduced down to zero and remains zero 33° 33°
(b) The intensity reduces down some what and rises again O
(c) There is no change in intensity
(d) The intensity gradually reduces to zero and then again increases
178. Polarised glass is used in sun glasses because
(a) It reduces the light intensity to half an account of polarisation (b) It is fashionable
(c) It has good colour (d) It is cheaper
179. In the propagation of electromagnetic waves the angle between the direction of propagation and plane of polarisation is
187. The observed wavelength of light coming from a distant galaxy is found to be increased by 0.5% as compared with that
comparing from a terrestrial source. The galaxy is
(a) Stationary with respect to the earth
(b) Approaching the earth with velocity of light
(c) Receding from the earth with the velocity of light
(d) Receding from the earth with a velocity equal to 1 . 5 10 6 m / s
Wave Optics 41
188. In hydrogen spectrum the wavelength of H line is 656 nm whereas in the spectrum of a distant galaxy. H line wavelength is
706nm. Estimated speed of the galaxy with respect to earth is
192. A star emitting light of wavelength 5896 Å is moving away from the earth with a speed of 3600 km/sec. The wavelength of light
observed on earth will ( c 3 10 8 m / sec is the speed of light)
(a) Decrease by 5825.25 Å (b) Increase by 5966.75 Å (c) Decrease by 70.75 Å (d) Increase by 70.75 Å
8
193. The periodic time of rotation of a certain star is 22 days and its radius is 7 10 m . If the wavelength of light emitted by its
surface be 4320 Å, the Doppler shift will be (1 day = 86400 sec)
(a) 0.033 Å (b) 0.33 Å (c) 3.3 Å (d) 33 Å
194. A heavenly body is receding from earth such that the fractional change in is 1, then its velocity is
3C C 2C
(a) C (b) (c) (d)
5 5 5
195. A star is going away from the earth. An observer on the earth will see the wavelength of light coming from the star
(a) Decreased
(b) Increased
(c) Neither decreased nor increased
(d) Decreased or increased depending upon the velocity of the star
196. If the shift of wavelength of light emitted by a star is towards violet, then this shows that star is
(a) Stationary (b) Moving towards earth (c) Moving away from earth (d) Information is incomplete
197. When the wavelength of light coming from a distant star is measured it is found shifted towards red. Then the conclusion is
(a) The star is approaching the observer (b) The star recedes away from earth
(c) There is gravitational effect on the light (d) The star remains stationary
198. In the spectrum of light of a luminous heavenly body the wavelength of a spectral line is measured to be 4747 Å while actual
wavelength of the line is 4700 Å. The relative velocity of the heavenly body with respect to earth will be (velocity of light is
3 10 8 m / s )
(a) 3 10 5 m / s moving towards the earth (b) 3 10 5 m / s moving away from the earth
(c) 3 10 6 m / s moving towards the earth (d) 3 10 6 m / s moving away from the earth
199. The wavelength of light observed on the earth, from a moving star is found to decrease by 0.05%. Relative to the earth the star is
(a) Moving away with a velocity of 1 .5 10 5 m / s (b) Coming closer with a velocity of 1 .5 10 5 m / s
(c) Moving away with a velocity of 1 .5 10 4 m / s (d) Coming closer with a velocity of 1 .5 10 4 m / s
200. Due to Doppler's effect, the shift in wavelength observed is 0.1 Å for a star producing wavelength 6000 Å. Velocity of recession of
the star will be
42 Wave Optics
(a) 2.5 km/s (b) 10 km/s (c) 5 km/s (d) 20 km/s
201. A rocket is going away from the earth at a speed of 10 6 m / s . If the wavelength of the light wave emitted by it be 5700 Å, what will
be its Doppler's shift
(a) 200 Å (b) 19 Å (c) 20 Å (d) 0.2 Å
202. A rocket is going away from the earth at a speed 0.2 c, where c = speed of light, it emits a signal of frequency 4 10 7 Hz . What
will be the frequency observed by an observer on the earth
203. A star moves away from earth at speed 0.8 c while emitting light of frequency 6 10 14 Hz . What frequency will be observed on
the earth (in units of 10 14 Hz ) (c = speed of light)
(a) 0.24 (b) 1.2 (c) 30 (d) 3.3
204. The sun is rotating about its own axis. The spectral lines emitted from the two ends of its equator, for an observer on the earth,
will show
(a) Shift towards red end
(b) Shift towards violet end
(c) Shift towards red end by one line and towards violet end by other
(d) No shift
205. The time period of rotation of the sun is 25 days and its radius is 7 10 8 m . The Doppler shift for the light of wavelength 6000 Å
emitted from the surface of the sun will be
(a) 0.04 Å (b) 0.40 Å (c) 4.00 Å (d) 40.0 Å
206. The apparent wavelength of the light from a star moving away from the earth is 0.01 % more than its real wavelength. Then the
velocity of star is
(a) 60 km/sec (b) 15 km/sec (c) 150 km/sec (d) 30 km/sec
160 Wave Optics
Answer Sheet
Assignments
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
a d c d b a c c b c d c d a b c d a c c
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
c b b c a d c d a d b b c b c d c c a b
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
c d c c a d a b c a d d c a b b a d a d
61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
c d c c c b b c b a b, c b d b c b d d b a
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
a a b a b d b b b d a c c c c a b b d b,d
101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120
c c a d b d a a,b a,c a a b a a,d c a d b a b
121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140
c a a c a c d c c a a b b c d d c b d d
141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
c a b a b a b d d b a c b a d c c c c a
161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180
b b a c a a c b d c d b d a c a d a a c
181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200
d c c c c d d b c d c d a a b b b d b c
201 202 203 204 205 206
b b b c a d