Work Guide: TLA Original March 28th. 2014 Jt8D Engine Manual

AVIANCA TRAINING CENTER
FOR TRAINING ONLY

WORK GUIDE
Program Revision No. Date Source Page
1 of 4
TLA Original March 28th. 2014 JT8D ENGINE MANUAL
WORK
KIND OF JOB SHOP ENGINES HYDRAULIC STRUCTURES
LEVEL III ELECTRICAL EQ. TASK
PRACTICE ACTIVITY TEST
STUDENT INFORMATION
NAMES Mariana Yusunguaira Almario
CODE 1076906944 SEMESTER 2BT
JUSTIFICATION
Develop skills for the maintenance of motors, improving the student ability to perform basic tasks required to
perform engines maintenance and allowing the construction of analytical and objective knowledge.
Develop skills on the principles of operation of the motor / internal combustion reciprocating, identifying their
characteristics and different types.
Time for activity accomplishment:
MATERIALS
P/N DESCRIPTION QTY UM OBSERVATIONS
TOOLS
P/N DESCRIPTION QTY UM OBSERVATIONS
APPROVAL
ASIGNATURE TURBINE ENGINE CODE TLA - P 004
NOTE: THE PRACTICES GUIDES ARE PROPERTY OF

MADE BY: ACADEMIC COORDINATOR
FOR TRAINING ONLY
WORK GUIDE
2 of 4
INSTRUCTIONS
STEPS
1. GENERAL STUDENT INSTRUCTOR
RECOMENDATIONS:
1.1. USE THE SAFETY AND HEALTH RECOMMENDATION IN THE DEVELOPMENT

OF THIS PRACTICE
a. USE THE PROPER UNIFORM TO ENTER AT WORKSHOPS

b. USE PERSONAL PROTECTIVE ELEMENTS AS APPLICABLE:
 GLOVES
 SUNGLASSES
 BOOTS
 HEARING PROTECTORS
 MASKS
1.2. IDENTIFY THE DEMARCATED AREAS THAT DELIMIT SPACES BY WHICH

MUST BE TRANSIT.
1.3. FOLLOW THE INSTRUCTOR INDICATIONS.
1.4. PICK UP ALL INSTRUMENTS AND TOOLS USED AND LEAVE CLEAN THE
WORK AREA.
FOR TRAINING ONLY
WORK GUIDE
3 of 4
INSTRUCTIONS
STEPS
2. WORK INSTRUCTIONS STUDENT INSTRUCTOR
Read all the steps in this guide and make sure you understand the instructions of work.
If you find any discrepancy or if any step is not clear, please consult the instructor.
LUBRICATION.
2-71. OIL SYSTEM. (ENGINE.)
2-72. SERVICING OIL SYSTEM. The engine oil level should be checked before each
flight
and changed after each 50 hours of engine operation. During oil change, the oil
screen(s)
should be removed and cleaned, and when installed, the oil filter cartridge replaced.
Intervals between oil changes can be increased as much as 100% on engines equipped
with
full flow (cartridge type) oil filters provided the element is replaced each 50 hours of
operation. Should fuel other than the specified octane rating for the power plant be
used,
refer to the latest revision of Lycoming Service Letter No. L185 for additional information
and recommended service procedures. The engine manufacturer does not recommend
oils by
brand names. Use a quality brand Aviation Grade Oil of the proper season viscosity. For
in-
formation on the use of detergent oil, refer to paragraph 2-77 and/or the latest revision
of
Lycoming Service Instruction No. 1014.
FOR TRAINING ONLY
WORK GUIDE
4 of 4
RECORD OF ACCOMPLISHMENT
WORK
FINAL REPORT
NAMES Shop/Classroom Date of Accomplishment
Mariana Yusunguaira Almario
Day Month Year
CODE 1076906944
FOUND CONDITION REPORT FINDINGS (Use additional sheets if necessary)
1. ACTIVITY RESULTS
STUDENTS OBSERVATIONS
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________ ____
________________________________________________________________
________________________________________________________________
INSTRUCTOR OBSERVATIONS
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________ ____
________________________________________________________________
________________________________________________________________
Student Signature: Instructor Signature:
Name: Name:
Code: Final Score:

Work Guide: TLA Original March 28th. 2014 Jt8D Engine Manual

Uploaded by

Copyright:

Available Formats

Work Guide: TLA Original March 28th. 2014 Jt8D Engine Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Work Guide: TLA Original March 28th. 2014 Jt8D Engine Manual

Uploaded by

Copyright:

Available Formats

AVIANCA TRAINING CENTER

FOR TRAINING ONLY

KIND OF JOB SHOP ENGINES HYDRAULIC STRUCTURES

LEVEL III ELECTRICAL EQ. TASK

PRACTICE ACTIVITY TEST

Time for activity accomplishment:

NOTE: THE PRACTICES GUIDES ARE PROPERTY OF

1.1. USE THE SAFETY AND HEALTH RECOMMENDATION IN THE DEVELOPMENT

a. USE THE PROPER UNIFORM TO ENTER AT WORKSHOPS

1.2. IDENTIFY THE DEMARCATED AREAS THAT DELIMIT SPACES BY WHICH

1.3. FOLLOW THE INSTRUCTOR INDICATIONS.

Student Signature: Instructor Signature:

Code: Final Score:

You might also like