Valves

JINAN MEIDE CASTING CO., LTD.

BS Standard
 10

※ Resilient Wedge Gate Valve

F or F i r e Spr i nkl er System

XZ81X XZ51X Z85X Z55X

Grooved Resilient OS&Y Flanged x Grooved Resilient Grooved Resilient NRS Flanged x Grooved Resilient
Gate Valve OS&Y Gate Valve Gate Valve NRS Gate Valve
Page 11 Page 12 Page 13 Page 14

※ Resilient Centerline Butterfly Valve ※ Swing Check Valve

XD381X D81X4 H84X DH87X

Grooved Butterfly Valve Grooved Butterfly Valve Grooved Resilient Swing Double Door Grooved Check Valve
with Tamper Switch Page 16 Check Valve Page 18
Page 15 Page 17

※ Y-Type Strainer ※ Water Flow Indicator ※ Grooved Wet Alarm Check Valve

V8 ZSJZ ZSFZ8X
Grooved Y-Type Strainer Water Flow Indicator Grooved Wet Alarm Check Valve
Page 19 Page 20 Page 21
 BS Valves 11

For Fi r e Spr i nkl er System

Grooved Resilient OS&Y Gate Valve
(XZ81X), PN10/16,
UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Resilient Wedge Disc EN-GJS-450-10+EPDM
3 O-Ring NBR EPDM
4 Stem Stainless Steel SS304, SS316, SS420, SS431

XZ81X 5 Nut Carbon Steel Zinc Plated SS304, SS316

6 Bonnet EN-GJS-450-10
7 Stem Bushing Brass Hpb59-1
8 Gland EN-GJS-450-10
• Connection Ends: Groove to ISO 6182 9 Flat Washer Carbon Steel Zinc Plated SS304, SS316
• Working Pressure: PN10/16 10 Stud Carbon Steel Zinc Plated SS304, SS316

• Temperature Range: 0℃- 100℃ 11 Nut Carbon Steel Zinc Plated SS304, SS316
12 Yoke EN-GJS-450-10
• Coating: Fusion Bonded Epoxy Coating in accordance with
13 Stem Nut Brass Hpb59-1 Bronze ZQSn5-5-5
ANSI/AWWA C550 or painting upon request
14 Washer Brass Hpb59-1
15 Locknut Carbon Steel Zinc Plated
16 Handwheel EN-GJS-450-10 Pressed Steel
17 Stem Packing EPDM NBR
18 Bonnet Gasket EPDM NBR

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm L H1(Close) H2(Open) OD d A B
2" 50 178 323 373 60.3 57.15 15.88 7.92
2.5" 65 190 343 408 73 69.09 15.88 7.92
2.5" 65 190 343 408 76.1 72.26 15.88 7.92
3" 80 203 370 450 88.9 84.94 15.88 7.92
4" 100 229 442 542 114.3 110.08 15.88 9.52
5" 125 254 541 665 139.7 135.48 15.88 9.52
5" 125 254 541 665 141.3 137.03 15.88 9.52
6" 150 267 608 758 159.0 154.50 15.88 9.52
6" 150 267 608 758 165.1 160.90 15.88 9.52
6" 150 267 608 758 168.3 163.96 15.88 9.52
8" 200 292 720 920 219.1 214.40 19.05 11.13
10" 250 330 939 1193 273.0 268.28 19.05 12.70
12" 300 356 1065 1370 323.9 318.29 19.05 12.70
 12

Flanged x Grooved Resilient OS&Y

F or F i r e Spr i nkl er System

Gate Valve (XZ51X), PN10/16,

UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10 　
2 Resilient Wedge Disc EN-GJS-450-10+EPDM 　
3 O-Ring NBR EPDM
4 Stem Stainless Steel SS304, SS316, SS420, SS431

XZ51X 5 Bolt Carbon Steel Zinc Plated SS304, SS316

6 Bonnet EN-GJS-450-10 　
7 Stem Bushing Brass HPb59-1 　
8 Gland EN-GJS-450-10 　
• Connection Ends: Flange to EN 1092-2:1997, 9 Flat Washer Carbon Steel Zinc Plated SS304, SS316
Groove to ISO 6182
10 Stud Carbon Steel Zinc Plated SS304, SS316
• Working Pressure: PN10/16 11 Nut Carbon Steel Zinc Plated SS304, SS316
• Temperature Range: 0℃- 100℃ 12 Yoke EN-GJS-450-10 　
13 Nut Brass HPb59-1 　
• Coating: Fusion Bonded Epoxy Coating in accordance with
ANSI/AWWA C550 14 Washer Brass HPb59-1 　
15 Locknut Carbon Steel Zinc Plated 　
16 Handwheel EN-GJS-450-10 Pressed Steel
17 Stem Packing EPDM NBR
18 Bonnet Gasket EPDM NBR

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm L H1(Close) H2(Open) D D1 n-d OD d A B
2" 50 178 323 373 165 125 4-Φ19 60.3 57.15 15.88 7.92
2.5" 65 190 343 408 185 145 4-Φ19 76.1 72.26 15.88 7.92
3" 80 203 370 450 200 160 8-Φ19 88.9 84.94 15.88 7.92
4" 100 229 442 542 220 180 8-Φ19 114.3 110.08 15.88 9.52
5" 125 254 541 665 250 210 8-Φ19 139.7 135.48 15.88 9.52
6" 150 267 608 758 285 240 8-Φ23 165.1 160.90 15.88 9.52
6" 150 267 608 758 285 240 8-Φ23 168.3 163.96 15.88 9.52
8" 200 292 720 920 340 295 12-Φ23 219.1 214.40 19.05 11.13
10" 250 330 939 1193 405 355 12-Φ28 273.0 268.28 19.05 12.70
12" 300 356 1065 1370 460 410 12-Φ28 323.9 318.29 19.05 12.70
 BS Valves 13

For Fi r e Spr i nkl er System

Grooved Resilient NRS Gate Valve
(Z85X), PN10/16,
UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Resilient Wedge Disc EN-GJS-450-10+EPDM
3 Stem Stainless Steel SS304, SS316, SS420, SS431
4 Nut Carbon Steel Zinc Plated SS304, SS316

Z85X 5 Bonnet EN-GJS-450-10

6 O-Ring NBR EPDM
7 Gland EN-GJS-450-10
8 Handwheel EN-GJS-450-10 Pressed Steel
• Connection Ends: Groove to ISO 6182
9 Bolt Carbon Steel Zinc Plated SS304, SS316
• Working Pressure: PN10/16 10 Flat Washer Carbon Steel Zinc Plated SS304, SS316
• Temperature Range: 0℃- 100℃ 11 Ring Wiper EPDM NBR
12 Bolt Carbon Steel Zinc Plated SS304, SS316
• Coating: Fusion Bonded Epoxy Coating in accordance with
ANSI/AWWA C550 or painting upon request 13 Flat Washer Carbon Steel Zinc Plated SS304, SS316
14 O-Ring NBR EMDM
15 Washer Brass HPb59-1
16 Bonnet Gasket EPDM NBR
17 Wedge Nut Brass HPb59-1 Bronze ZQSn5-5-5

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm L H OD d A B
2" 50 178 218 60.3 57.15 15.88 7.92
2.5" 65 190 230 73 69.09 15.88 7.92
2.5" 65 190 230 76.1 72.26 15.88 7.92
3" 80 203 281 88.9 84.94 15.88 7.92
4" 100 229 316 114.3 110.08 15.88 9.52
5" 125 254 393 139.7 135.48 15.88 9.52
5" 125 254 393 141.3 137.03 15.88 9.52
6" 150 267 420 159.0 154.50 15.88 9.52
6" 150 267 420 165.1 160.90 15.88 9.52
6" 150 267 420 168.3 163.96 15.88 9.52
8" 200 292 490 219.1 214.40 19.05 11.13
10" 250 330 626 273.0 268.28 19.05 12.70
12" 300 356 722 323.9 318.29 19.05 12.70
 14

Flanged x Grooved Resilient NRS

F or F i r e Spr i nkl er System

Gate Valve (Z55X), PN10/16,

UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10 　
2 Resilient Wedge Disc EN-GJS-450-10+EPDM 　
3 Stem Stainless Steel SS304, SS316, SS420, SS431
4 Bolt Carbon Steel Zinc Plated SS304, SS316

Z55X 5 Bonnet EN-GJS-450-10 　

6 O-Ring NBR EPDM
7 Gland EN-GJS-450-10 　
8 Handwheel EN-GJS-450-10 Pressed Steel
• Connection Ends: Flange to EN 1092-2:1997,
9 Bolt Carbon Steel Zinc Plated SS304, SS316
Groove to ISO 6182
10 Flat Washer Carbon Steel Zinc Plated SS304, SS316
• Working Pressure: PN10/16 11 Ring Wiper EPDM NBR
• Temperature Range: 0℃- 100℃ 12 Bolt Carbon Steel Zinc Plated SS304, SS316

• Coating: Fusion Bonded Epoxy Coating in accordance with 13 Flat Washer Carbon Steel Zinc Plated SS304, SS316
ANSI/AWWA C550 14 O-Ring NBR EPDM
15 Washer Brass HPb59-1
16 Bonnet Gasket EPDM NBR
17 Wedge Nut Brass HPb59-1 Bronze ZQSn5-5-5

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm L H D D1 n-d OD d A B
2" 50 178 218 165 125 4-Φ19 60.3 57.15 15.88 7.92
2.5" 65 190 230 185 145 4-Φ19 76.1 72.26 15.88 7.92
3" 80 203 281 200 160 8-Φ19 88.9 84.94 15.88 7.92
4" 100 229 316 220 180 8-Φ19 114.3 110.08 15.88 9.52
5" 125 254 393 250 210 8-Φ19 139.7 135.48 15.88 9.52
6" 150 267 420 285 240 8-Φ23 165.1 160.90 15.88 9.52
6" 150 267 420 285 240 8-Φ23 168.3 163.96 15.88 9.52
8" 200 292 490 340 295 12-Φ23 219.1 214.40 19.05 11.13
10" 250 330 626 405 355 12-Φ28 273.0 268.28 19.05 12.70
12" 300 356 722 460 410 12-Φ28 323.9 318.29 19.05 12.70
 BS Valves 15

For Fi r e Spr i nkl er System

Grooved Butterfly Valve
with Tamper Switch (XD381X),
PN10/16, UL Listed

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Disc EN-GJS-450-10+EPDM EN-GJS-450-10+NBR
3 O-Ring NBR EPDM
XD381X
4 Stem Stainless Steel SS304, SS316, SS420, SS431
5 O-Ring NBR EPDM
6 Stem Stainless Steel SS304, SS316, SS420, SS431
• Design Standard: BS EN 593 7 Signal Gear Box EN-GJS-450-10

• Connection Ends: Groove to ISO 6182 Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
• Top Flange standard: ISO 5211
Stem drive by keys, parallel or diagonal square or flat head
• Working Pressure: PN10/16 SWITCH WIRING DIAGRAM
• Temperature Range: 0℃- 100℃ Open (Red)

• Coating: Fusion Bonded Epoxy Coating in accordance with Fire Alarm Control Common (White) Closed (Black) End of Line Resistor
ANSI/AWWA C550 or painting upon request Panel Supervisory Circuit or Next Device

Actuator Case Ground (Yellow/Green Double Color)

Open (Yellow)

Common (Green) Closed (Blue) Aux. Device

Voltage Source
(Bell or Horn)

XD381X39
DN Dimensions(mm)
Inch mm A B C ΦD ΦF ΦG L1 L2 L ΦK H H1 H2 H3 J ΦM Φ2 ISO 5211
2" 50 89 65 81 50.3 60.3 57.15 15.88 7.93 32 90 208 151 65 108 147 150 14 F07
2.5" 65 102 71 97 60.8 73.0 69.09 15.88 7.93 32 90 208 151 65 108 147 150 14 F07
2.5" 65 102 71 97 60.8 76.1 72.26 15.88 7.93 32 90 208 151 65 108 147 150 14 F07
3" 80 109 81 97 76 88.9 84.94 15.88 7.93 32 90 208 151 65 108 147 150 14 F07
4" 100 128 95 116 98.5 114.3 110.08 15.88 9.53 32 90 208 151 65 108 147 150 16 F07
5" 125 141 111 148 122.6 139.7 135.48 15.88 9.53 32 90 208 151 65 108 147 150 16 F07
5" 125 141 111 148 122.6 141.3 137.03 15.88 9.53 32 90 208 151 65 108 147 150 16 F07
6" 150 153 133 148 148 165.1 160.9 15.88 9.53 32 90 208 151 65 108 147 150 20 F07
6" 150 153 133 148 148 168.3 163.96 15.88 9.53 32 90 208 151 65 108 147 150 20 F07
8" 200 184 164 133 199 219.1 214.4 19.05 11.10 45 125 298 223 77 121 184 200 26 F10
10" 250 216 196 159 252 273.0 268.28 19.05 12.70 45 125 298 223 77 121 184 200 26 F10
12" 300 254 226 165 300.5 323.9 318.29 19.05 12.70 45 125 299 224 77 121 184 250 28 F10

Note: Valve must not be installed with disc in full open position. Disc must be partly closed so that no part is protruding beyond end of valve body.
 16

Grooved Butterfly Valve

F or F i r e Spr i nkl er System

(D81X4, D381X4),
PN10/16

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Disc EN-GJS-450-10+EPDM EN-GJS-450-10+NBR
3 O-Ring NBR EPDM
D81X4
4 Stem Stainless Steel SS304, SS316, SS420, SS431
5 O-Ring NBR EPDM
• Design Standard: BS EN 593
6 Stem Stainless Steel SS304, SS316, SS420, SS431
• Connection Ends: Groove to ISO 6182 7 Lever EN-GJS-450-10 Aluminum
• Top Flange standard: ISO 5211 8 Gear Box EN-GJS-450-10
Stem drive by keys, parallel or diagonal square or flat head
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
• Working Pressure: PN10/16
• Temperature Range: 0℃- 100℃
• Coating: Fusion Bonded Epoxy Coating in accordance with
ANSI/AWWA C550 or painting upon request

D381X4

DN Dimensions(mm)
Inch mm A B C ΦD ΦF ΦG L1 L2 L ΦK H H1 H2 J ΦM Φ2 ISO 5211 ΦE N-Φ1
2" 50 89 65 81 50.3 60.3 57.15 15.88 7.93 32 90 206 158 52 114 150 14 F07 70 4-Φ10
2.5" 65 102 71 97 60.8 73.0 69.09 15.88 7.93 32 90 206 158 52 114 150 14 F07 70 4-Φ10
2.5" 65 102 71 97 60.8 76.1 72.26 15.88 7.93 32 90 206 158 52 114 150 14 F07 70 4-Φ10
3" 80 109 81 97 76 88.9 84.94 15.88 7.93 32 90 206 158 52 114 150 14 F07 70 4-Φ10
4" 100 128 95 116 98.5 114.3 110.08 15.88 9.53 32 90 206 158 52 114 150 16 F07 70 4-Φ10
5" 125 141 111 148 122.6 139.7 135.48 15.88 9.53 32 90 206 158 52 114 150 16 F07 70 4-Φ10
5" 125 141 111 148 122.6 141.3 137.03 15.88 9.53 32 90 206 158 52 114 150 16 F07 70 4-Φ10
6" 150 153 133 148 148 159.0 154.50 15.88 9.53 32 90 206 158 52 114 150 20 F07 70 4-Φ10
6" 150 153 133 148 148 165.1 160.9 15.88 9.53 32 90 206 158 52 114 150 20 F07 70 4-Φ10
6" 150 153 133 148 148 168.3 163.96 15.88 9.53 32 90 206 158 52 114 150 20 F07 70 4-Φ10
8" 200 184 164 133 199 219.1 214.4 19.05 11.10 45 125 310 239 69 167 300 26 F10 102 4-Φ12
10" 250 216 196 159 252 273.0 268.28 19.05 12.70 45 125 310 239 69 167 300 26 F10 102 4-Φ12
12" 300 254 226 165 300.5 323.9 318.29 19.05 12.70 45 125 307 229 73 190 300 28 F10 102 4-Φ12
14" 377 290 241 178 324 377 371.4 23.8 12.7 45 150 307 229 73 190 300 31.7 F12 125 4-Ø14

Note: Valve must not be installed with disc in full open position. Disc must be partly closed so that no part is protruding beyond end of valve body.
 BS Valves 17

For Fi r e Spr i nkl er System

Grooved Resilient Swing
Check Valve (H84X), PN10/16,
UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10

H84X 2 Hinge Pin SS420

3 Spring SS304 SS316
4 Eye Bolt Carbon Steel Zinc Plated

• Connection Ends: Groove to ISO 6182 DN50-100 SS304

5 Disc SS304
DN150-300 EN-GJS-450-10
• Working Pressure: PN10/16 6 Disc Sealing Ring EPDM NBR
• Temperature Range: 0℃- 100℃ 7 Seat Ring ASTM B62 C83600 (Pressed Fit) SS304, SS316 Pressed Fit or Threaded

• Coating: Fusion Bonded Epoxy Coating in accordance with 8 Plug Malleable Iron Galvanized Bronze ASTM B584

ANSI/AWWA C550 or painting upon request 9 Plug Malleable Iron Galvanized Bronze ASTM B584
10 Plug Malleable Iron Galvanized Bronze ASTM B584
11 Plug Malleable Iron Galvanized Bronze ASTM B584
12 Bolt SS304 SS316
13 Washer SS304 SS316
14 Nut SS304 SS316

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
P3
Inch mm L D1 D2 B C P1 P2
Standard Option
2" 50 171 57.15 60.3 7.93 15.88 1/2 1/2 1 1/4
2.5" 65 184 69.09 73.0 7.93 15.88 1/2 1/2 1 1/4 1/4
2.5" 65 184 72.26 76.1 7.93 15.88 1/2 1/2 1 1/4 1/4
3" 80 197 84.94 88.9 7.93 15.88 1/2 1/2 1 1/4 1/4
4" 100 210 110.08 114.3 9.53 15.88 1/2 1/2 2 1/4
5" 125 248 135.48 139.7 9.53 15.88 1/2 1/2 2 1/4
5" 125 248 137.03 141.3 9.53 15.88 1/2 1/2 2 1/4
6" 150 324 160.90 165.1 9.53 15.88 1/2 1/2 2 1/4
6" 150 324 163.96 168.3 9.53 15.88 1/2 1/2 2 1/4
8" 200 371 214.40 219.1 11.13 19.05 1/2 1/2 2 1/4
10" 250 457 268.28 273.0 12.70 19.05 1/2 1/2 2 1/4
12" 300 535 318.29 323.9 12.70 19.05 1/2 1/2 2 1/4
 18

Double Door Grooved Check Valve

F or F i r e Spr i nkl er System

(DH87X), PN10/16

DH87X

• Connection Ends: Groove to ISO 6182 MATERIAL SPECIFICATION

• Working Pressure: PN10/16 Part No. Part Standard Specification Options

• Temperature Range: 0℃- 100℃ 1 Countersunk Hex Head Screws Carbon Steel Zinc Plated

• Coating: Fusion Bonded Epoxy Coating in accordance with 2 Seal Ring EPDM
ANSI/AWWA C550 3 Gasket PTFE

4 Shaft SS420 SS304, SS316, SS431

5 Gasket PTFE

6 Spring SS304

7 Disc SS304 SS316,QT450-10

8 Body EN-GJS-450-10

9 Eye Bolt Carbon Steel Zinc Plated

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm A B C D E F L
8" 219.1 19.1 11.1 214.4 219 200 165 160
10" 273.0 19.1 12.7 268.28 273 253 203 180
12" 323.9 19.1 12.7 318.29 324 307 228 180
14" 377.0 23.8 12.7 371.1 377 354 258 200
 BS Valves 19

For Fi r e Spr i nkl er System

Grooved Y-Type Strainer (V8),
PN10/16, UL Listed

V8

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

• Connection Ends: Groove to ISO 6182
1 Valve Body EN-GJS-450-10
• Working Pressure: PN10/16
2 Screen SS304 SS316
• Temperature Range: 0℃- 100℃ 3 Rigid Coupling EN-GJS-450-10

• Coating: Fusion Bonded Epoxy Coating in accordance with 4 Cap EN-GJS-450-10

ANSI/AWWA C550 or painting upon request 5 Plug Malleable Iron Galvanized Bronze ASTM B584

STANDARD SCREEN

DN Hole Dia. Free Flow Area(%)

Sieve No.
Inch mm mm %
2"~2.5" 50~65 25 4 48
3"~4" 80~100 19 5 59
5" 125 14 6 63
6"~12" 150~300 13 6.3 64

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm L OD d A B
2" 50 247.5 60.3 57.15 15.88 7.92
2.5" 65 273 73 69.09 15.88 7.92
2.5" 65 273.0 76.1 72.26 15.88 7.92
3" 80 298.5 88.9 84.94 15.88 7.92
4" 100 362.0 114.3 110.08 15.88 9.52
5" 125 419.0 139.7 135.48 15.88 9.52
5" 125 419 141.3 137.03 15.88 9.52
6" 150 470.0 159.0 154.50 15.88 9.52
6" 150 470.0 165.1 160.90 15.88 9.52
6" 150 470.0 168.3 163.96 15.88 9.52
8" 200 609.5 219.1 214.40 19.05 11.13
10" 250 686.0 273.0 268.28 19.05 12.70
12" 300 762.0 323.9 318.29 19.05 12.70
 20

Water Flow Indicator (ZSJZ),

F or F i r e Spr i nkl er System

PN10/16

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

ZSJZ 1 Body EN-GJS-450-10

2 Bolt Carbon Steel Zinc Plated SS304, SS316
• Connection Ends: ISO 6182 3 Lodicule Plastic

• Working Pressure: PN10/16 4 Nut Carbon Steel Zinc Plated SS304, SS316
5 Gasket EPDM NBR
• Temperature Range: 0℃ - 100℃
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
• Coating: Fusion Bonded Epoxy Coating in accordance with
ANSI/AWWA C550

SWITCH WIRING DIAGRAM

DN Dimensions(mm)
Inch mm R A B C D Hole Dia.
2" 50 60.3 62 48 36 120 32
2.5" 65 73 62 48 31 130 32
2.5" 65 76.1 62 48 31 130 32
3" 80 88.9 62 48 36.5 145 51
4" 100 114.3 62 48 30.5 185 51
5" 125 139.7 62 48 36.5 221.5 51
5" 125 141.3 62 48 36.5 221.5 51
6" 150 165.1 62 48 33 254 51
6" 150 168.3 62 48 33 254 51
8" 200 219.1 62 48 36.5 300 51
 BS Valves 21

For Fi r e Spr i nkl er System

Grooved Wet Alarm Check Valve
(ZSFZ8X), PN10/16

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Bonnet EN-GJS-450-10
3 Pin SS304 SS316
4 Hex Bolt Carbon Steel Zinc Plated
5 Gasket EPDM NBR

ZSFZ8X 6 Hex Bolt SS304 SS316

7 Gland Brass H62
• Connection Ends: Groove to ISO 6182 8 Seat Bronze ZQSn5-5-5

• Working Pressure: PN10/16 9 O-Ring NBR EPDM

10 Gasket EPDM
• Temperature Range: 0℃- 100℃
11 Disc Brass H62
• Coating: Painting or Fusion Bonded Epoxy Coating in 12 Plug SS304 SS316
accordance with ANSI/AWWA C550
13 Spring SS321

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm OD A B ￠d ￠D F
3" 80 88.9 15.88 7.93 84.94 88.9 320.3
4" 100 114.3 15.88 9.53 110.08 114.3 382
6" 150 165.1 15.88 9.53 160.9 165.1 406.4
6" 150 168.3 15.88 9.53 163.96 168.3 406.4
8" 200 219.1 19.05 11.1 214.4 219.1 446

External accessories
Part No. Part Part No. Part
1 Alarm 7 Check Valve
2 Pressure switch 8 Pressure gauge
3 Strainer 9 Ball valve
4 Decelerator 10 Ball valve
5 Pressure gauge 11 Ball valve
6 Ball valve 12 Drip valve
 22

※ Resilient Wedge Gate Valve

F or F i r e Spr i nkl er System

XZ41X Z45XC Z45XC-2 IP WP

Flanged Resilient OS&Y Flanged Resilient NRS Flanged Resilient NRS Vertical Indicator Post Wall Indicator Post
Gate Valve Gate Valve Gate Valve with Post Flange Page 26 Page 27
Page 23 Page 24 Page 25

※ Resilient Centerline Butterfly Valve

XD371X XD371XL XD311X

Wafer Butterfly Valve Lugged Wafer Butterfly Valve Threaded Buttefly Valve
with Tamper Switch with Tamper Switch with Tamper Switch
Page 28 Page 29 Page 30

※ Swing Check Valve ※ Y-Type Strainer ※ Landing Valve

H44X2 V4 SN
Flanged Resilient Swing Check Valve Flanged Y-Type Strainer Landing Valve
Page 31 Page 32 Page 33

※ Flanged Wet Alarm Valve ※ Electric Inspector's Test Connection ※ Manual Inspector's Test Connection

ZSFZ4X ZSPM-80-DX ZSPM-80-SA

Flanged Wet Alarm Valve Electric Inspector's Test Connection Manual Inspector's Test Connection
Page 35 Page 36 Page 36
 BS Valves 23

For Fi r e Spr i nkl er System

Flanged Resilient OS&Y Gate Valve,
(XZ41X), PN10/16,
UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Resilient Wedge Disc EN-GJS-450-10+EPDM
3 O-Ring NBR EPDM
4 Stem Stainless Steel SS304, SS316, SS420, SS431
5 Bolt Carbon Steel Zinc Plated SS304, SS316
6 Bonnet EN-GJS-450-10
7 Stem Bushing Brass Hpb59-1
XZ41X 8 Gland EN-GJS-450-10
9 Flat Washer Carbon Steel Zinc Plated SS304, SS316
10 Stud Carbon Steel Zinc Plated SS304, SS316

• Connection Ends: Flange to BS EN 1092-2:1997 11 Nut Carbon Steel Zinc Plated SS304, SS316
12 Yoke EN-GJS-450-10
• Working Pressure: PN10/16
13 Stem Nut Brass Hpb59-1
• Temperature Range: 0℃- 100℃ 14 Washer Brass Hpb59-1
• Coating: Fusion Bonded Epoxy Coating in accordance with Carbon Steel Zinc Plated (Type A )
15 Locknut
ANSI/AWWA C550 Not available (Type B )
16 Handwheel EN-GJS-450-10 Pressed Steel
17 Stem Packing EPDM NBR
18 Bonnet Gasket EPDM NBR

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)

PN TypeA TypeB
Inch mm L H1 H2 H1 H2 D D1 d C T n-φL
(Close) (Open) (Close) (Open)
2" 50 10/16 178 323 373 348 400 165 125 99 19 3 4-Ø19
2.5" 65 10/16 190 343 408 373 440 185 145 118 19 3 4-Ø19
3" 80 10/16 203 370 450 408 490 200 160 132 19 3 8-Ø19
4" 100 10/16 229 442 542 471 573 220 180 156 19 3 8-Ø19
XZ41X-1 5" 125 10/16 254 541 665 541 665 250 210 184 19 3 8-Ø19
6" 150 10 267 608 758 593 743 285 240 211 19 3 8-Ø23
10 8-Ø23
8" 200 292 720 920 774 975 340 295 266 20 3
16 12-Ø23
10 350 12-Ø23
10" 250 330 940 1190 940 1190 405 319 22 3
16 355 12-Ø28
10 400 12-Ø23
12" 300 356 1065 1370 1065 1370 460 370 24.5 4
16 410 12-Ø28
 24

Flanged Resilient NRS

F or F i r e Spr i nkl er System

Gate Valve (Z45XC), PN10/16,

UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Resilient Wedge Disc EN-GJS-450-10+EPDM
3 Stem Stainless Steel SS304, SS316, SS420, SS431
4 Bolt Carbon Steel Zinc Plated SS304, SS316
5 Bonnet EN-GJS-450-10
Z45XC 6 O-Ring NBR
7 Gland EN-GJS-450-10
8 Stem Cap EN-GJS-450-10

• Connection Ends: Flange to BS EN 1092-2:1997 9 Bolt Carbon Steel Zinc Plated SS304, SS316
10 Ring Wiper EPDM NBR
• Working Pressure: PN10/16
11 Bolt Carbon Steel Zinc Plated SS304, SS316
• Temperature Range: 0℃- 100℃
12 Flat Washer Carbon Steel Zinc Plated SS304, SS316
• Coating: Fusion Bonded Epoxy Coating in accordance with 13 O-Ring NBR EPDM
ANSI/AWWA C550 Washer(Type A)
14 Brass Hpb59-1
Axis Guide (Type B)
15 Bonnet Gasket EPDM NBR
16 Wedge nut Brass Hpb59-1 Bronze ZQSn5-5-5

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
PN H
Inch mm L D D1 d C T n-d
TypeA TypeB
2" 50 10/16 178 241 279 165 125 99 19 3 4-Ø19
Z45X Z45X-1 2.5" 65 10/16 190 255 297 185 145 118 19 3 4-Ø19
3" 80 10/16 203 304 323 200 160 132 19 3 8-Ø19
4" 100 10/16 229 337 376 220 180 156 19 3 8-Ø19
5" 125 10/16 254 404 404 250 210 184 19 3 8-Ø19
6" 150 16 267 436 457 285 240 211 19 3 8-Ø23
10 8-Ø23
8' 200 292 443 557 340 295 266 20 3
16 12-Ø23
10 350 12-Ø23
10" 250 330 641 641 405 319 22 3
16 355 12-Ø28
10 400 12-Ø23
12" 300 356 743 743 460 370 24.5 4
XZ45X-1 XZ45X XZ45X-2 16 410 12-Ø28
 BS Valves 25

For Fi r e Spr i nkl er System

Flanged Resilient NRS
Gate Valve,with Post Flange (Z45XC-2),
PN10/16, UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Resilient Wedge Disc EN-GJS-450-10+EPDM
3 Stem Stainless Steel SS304, SS316, SS420, SS431
4 Bolt Carbon Steel Zinc Plated SS304, SS316
5 Bonnet EN-GJS-450-10
Z45XC-2 6 O-Ring NBR EPDM
7 Gland EN-GJS-450-10
8 Stem Cap EN-GJS-450-10

• Connection Ends: Flange to BS EN 1092-2:1997 9 Bolt Carbon Steel Zinc Plated SS304, SS316
10 Ring Wiper NBR
• Working Pressure: PN10/16
11 Bolt Carbon Steel Zinc Plated SS304, SS316
• Temperature Range: 0℃- 100℃
12 Flat Washer Carbon Steel Zinc Plated SS304, SS316
• Coating: Fusion Bonded Epoxy Coating in accordance with 13 O-Ring NBR EPDM
ANSI/AWWA C550 Brass HPb59-1 (Type A)
14 Thrust Washer
Not Available (Type B)
15 Bonnet Gasket EPDM NBR
16 Wedge Nut Brass HPb59-1 Bronze ZQSn5-5-5
17 Post Flange EN-GJS-450-10

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
PN H
Inch mm L D D1 d C T n-d
TypeA TypeB
4" 100 10/16 229 347 395 220 180 156 19 3 8-Φ19
5" 125 10/16 254 432 432 250 210 184 19 3 8-Φ19
6" 150 10/16 267 443 475 285 240 211 19 3 8-Φ23
10 8-Φ23
8" 200 292 518 585 340 295 266 20 3
16 12-Φ23
10 350 12-Φ23
10" 250 330 656 656 405 319 22 3
16 355 12-Φ28
10 400 12-Φ23
12" 300 356 751 751 460 370 24.5 4
16 410 12-Φ28
 26

Vertical Indicator Post (IP),

F or F i r e Spr i nkl er System

UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification

1 Hex Nut Carbon Steel Zinc Plated
2 Hex Bolt Carbon Steel Zinc Plated
3 Socket EN-GJS-450-10
4 Cotter Pin SS304
5 Base Flange Cast Iron EN-GJL-200
6 Hex Bolt Carbon Steel Zinc Plated
7 Hex Nut Carbon Steel Zinc Plated
8 Standpipe Carbon Steel
9 Stem 1" Square Carbon Steel
10 Body Cast Iron EN-GJL-200
11 Locking Wrench EN-GJS-450-10
12 Target Carrier Nut Cast Aluminum
13 Hex Bolt Carbon Steel Zinc Plated
14 Hex Nut Carbon Steel Zinc Plated
15 Hex Bolt Carbon Steel Zinc Plated
16 Target Cast Aluminum
17 Window Glass Plexiglass
18 Gasket EPDM
19 Operating Nut SS304
20 Top Section Cast Iron EN-GJL-200
21 Snap Ring Spring Steel
22 Plug Malleable Iron
23 Square Nut Carbon Steel Zinc Plated
IP
24 Hex Bolt Carbon Steel Zinc Plated

Field Adjustment:
1.Remove the Top Section from the top of the Indicator Post assembly;
• Statement: 2.Cut the required stem length and adjust the Standpipe to match up to the ground line;
Vertical indicator post provides a means to operate a 3.Set the "OPEN" and "SHUT" targets for the appropriate valve size;
4.Reattach the Top Section to the top of the Indicator Post assembly.
buried or otherwise inaccessible valve and able to indicate
the open or shut position of the valve.
• Coating:
Fusion Bonded Epoxy Coating in accordance with
ANSI/AWWA C550
 BS Valves 27

For Fi r e Spr i nkl er System

Wall Indicator Post (WP),
UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification

1 Body Cast Iron EN-GJL-200
2 Plug Malleable Iron
WP
3 Square Nut Carbon Steel Zinc Plated
4 Hex Bolt Carbon Steel Zinc Plated
5 Cover Cast Iron EN-GJL-200
• Statement: 6 Hand Wheel EN-GJS-450-10
Wall indicator post provides a means to operate a valve installed 7 Eye Bolt Carbon Steel Zinc Plated
behind a wall and able to indicate the open or shut position of the
8 Gasket Carbon Steel Zinc Plated
valve.
9 Snap Ring Spring Steel
• Coating: 10 Operating Nut SS304
Fusion Bonded Epoxy Coating in accordance with
11 Gasket EPDM
ANSI/AWWA C550
12 Window Class Plexiglass
13 Target Cast Aluminum
14 Hex Bolt Carbon Steel Zinc Plated
15 Hex Bolt Carbon Steel Zinc Plated
16 Hex Nut Carbon Steel Zinc Plated
17 Target Carrier Nut SS304
18 Hex Nut Carbon Steel Zinc Plated
19 Hex Bolt Carbon Steel Zinc Plated
20 Stem 1" Square Carbon Steel
21 Cotter Pin SS304
22 Socket ASTM A536, 65-45-12

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list;
 28

Wafer Butterfly Valve

F or F i r e Spr i nkl er System

with Tamper Switch (XD371X),

PN10/16, UL Listed

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10

NBR/Fluororubber&Backing
2 Seat EPDM & Backing EPDM/NBR Vulcanized on Valve Body
Soft Seat in EPDM/NBR
XD371X
3 Disc EN-GJS-450-10 SS304, SS316, AL-Bronze C95400

4 Stem Stainless Steel, One-Piece Stem Design SS304, SS316, SS420, SS431

• Design Standard: BS EN 593 5 O-Ring NBR EPDM

• Connection Ends: BS EN 1092 PN10/PN16, AS 2129 TABLE E, 6 Bushing PTFE Nylon 1010
JIS B2212 10K, BS 10 TABLE D/E 7 Signal Gear Box EN-GJS-450-10
• Top Flange Standard: ISO 5211
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
Stem drive by keys, parallel or diagonal square or flat head
• Working Pressure: PN10/16
• Temperature Range: 0℃- 100℃ SWITCH WIRING DIAGRAM

• Coating: Fusion Bonded Epoxy Coating in accordance with Open (Red)

ANSI/AWWA C550 Fire Alarm Control Common (White) Closed (Black) End of Line Resistor
Panel Supervisory Circuit or Next Device

Actuator Case Ground (Yellow/Green Double Color)

Open (Yellow)

Common (Green) Closed (Blue) Aux. Device

Voltage Source
(Bell or Horn)

XD371X39

DN Dimensions(mm)

Inch mm A B M H H1 H2 H3 K G ØD C Ø2 L ISO 5211

2" 50 140.5 64.5 150 208 151 65 108 90 59 53.9 43 14 32 F07

2.5" 65 153 72 150 208 151 65 108 90 59 65.2 46 14 32 F07

3" 80 157.5 86 150 208 151 65 108 90 59 79.7 46 14 32 F07

4" 100 176 100 150 208 151 65 108 90 59 105 52 16 32 F07

5" 125 191 112 150 208 151 65 108 90 59 130 56 16 32 F07

6" 150 202.5 128 150 208 151 65 108 90 59 156 56 20 32 F07

8" 200 243.5 162 200 298 223 77 121 125 75 207 60 26 45 F10

10" 250 273 194 200 298 223 77 121 125 75 253.3 68 26 45 F10

12" 300 311 223 250 299 224 77 121 125 75 301.9 78 28 45 F10

Note: Not designed for dead end service

 BS Valves 29

For Fi r e Spr i nkl er System

Lugged Wafer Butterfly Valve
with Tamper Switch (XD371XL),
PN10/16, UL Listed

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10

NBR/Fluororubber&Backing
2 Seat EPDM & Backing EPDM/NBR Vulcanized on Valve Body
Soft Seat in EPDM/NBR
XD371XL
3 Disc EN-GJS-450-10 SS304, SS316, AL-Bronze C95400

4 Stem Stainless Steel, One-Piece Stem Design SS304, SS316, SS420, SS431

• Design Standard: BS EN 593 5 O-Ring NBR EPDM

• Connection Ends: BS EN 1092 PN10/16 6 Bushing PTFE Nylon 1010

• Top Flange Standard: ISO 5211 7 Signal Gear Box EN-GJS-450-10

Stem drive by keys, parallel or diagonal square or flat head Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
• Working Pressure: PN10/16
• Temperature Range: 0℃- 100℃
• Coating: Fusion Bonded Epoxy Coating in accordance with SWITCH WIRING DIAGRAM
ANSI/AWWA C550 Open (Red)

Fire Alarm Control Common (White) Closed (Black) End of Line Resistor
Panel Supervisory Circuit or Next Device

Actuator Case Ground (Yellow/Green Double Color)

Open (Yellow)

Common (Green) Closed (Blue) Aux. Device

Voltage Source
(Bell or Horn)

DN Dimensions(mm)
Inch mm A B C N-M ØD1 M H H1 H2 H3 K G ØD Ø2 L ISO 5211
2" 50 140.5 64.5 43 4-M16 125 150 208 151 65 108 90 59 53.9 14 32 F07
2.5" 65 153 72 46 4-M16 145 150 208 151 65 108 90 59 65.2 14 32 F07
3" 80 157.5 86 46 8-M16 160 150 208 151 65 108 90 59 79.7 14 32 F07
4" 100 176 100 52 8-M16 180 150 208 151 65 108 90 59 105 16 32 F07
5" 125 191 112 56 8-M16 210 150 208 151 65 108 90 59 129.8 16 32 F07
6" 150 202.5 128 56 8-M20 240 150 208 151 65 108 90 59 155.8 20 32 F07
8" 200 243.5 162 60 12-M20 295 200 298 223 77 121 125 75 207 26 45 F10
10" 250 273 194 68 12-M24 355 200 298 223 77 121 125 75 253.3 26 45 F10
12" 300 311 223 78 12-M24 410 250 299 224 77 121 125 75 301.9 28 45 F10
 30

Threaded Buttefly Valve

F or F i r e Spr i nkl er System

with Tamper Switch (XD311X),

PN10

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Screw Carbon Steel Zinc Plated SS304, SS316
XD311X
3 Stem Stainless Steel SS304, SS316, SS420, SS431
4 O-Ring NBR EPDM
5 Disc Carbon Steel+EPDM Carbon Steel+NBR
• Connection Ends: Thread to ISO 7-1 6 Stem Stainless Steel SS304, SS316, SS420, SS431
• Working Pressure: PN10 7 O-Ring NBR EPDM

• Temperature Range: 0℃- 100℃ 8 O-Ring NBR EPDM

9 Signal Gear Box Carbon Steel
• Coating: Fusion Bonded Epoxy Coating in
accordance with ANSI/AWWA C550 or double Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
coating of hot dipped galvanization plus electroplating

DN Dimensions(mm)
Inch mm L H H1 A B C(Rc)

1" 25 54 115 33 125 41 1

1.25" 32 67 117.5 37 125 49 11/4

1.5" 40 73 121 40.5 125 55.5 11/2

2" 50 82.5 131 48 125 71 2

 BS Valves 31

For Fi r e Spr i nkl er System

Flanged Resilient Swing Check Valve
(H44X2), PN10/16,
UL/FM Approved

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Bonnet EN-GJS-450-10
H44X2
3 Flat Washer Carbon Steel Zinc Plated
4 Bolts Carbon Steel Zinc Plated
5 Eye Bolt Carbon Steel Zinc Plated
• Connection Ends: Flange to BS EN 1092-2:1997
6 O-Ring EPDM NBR
• Working Pressure: PN10/16 7 Plug SS304 Bronze ASTM B584
• Temperature Range: 0℃- 100℃ 8 O-Ring EPDM NBR

• Coating: Fusion Bonded Epoxy Coating in accordance with 9 Hinge Pin SS304 SS316
ANSI/AWWA C550 10 Washer Brass ASTM B16 C36000/Hpb63-3 SS304
11 Hinge Bushing Brass ASTM B16 C36000/Hpb63-3 SS304
Bronze ASTM B62
12 Seat Ring SS304
C83600/ZQSn5-5-5(Pressed Fit)

13 Disc Seat Bolts SS304

Bronze ASTM B62

14 Retainer Washer
C83600/ZQSn5-5-5
15 Disc Seat Ring EPDM NBR
16 Disc EN-GJS-450-10
17 Clapper Arm EN-GJS-450-10
18 Disc Bushing Brass ASTM B16 C36000/Hpb63-3
19 O-Ring EPDM NBR
20 Washer Brass ASTM B16 C36000/Hpb63-3 SS304
Bronze ASTM B62
21 Nut SS304
C83600/ZQSn5-5-5

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
PN
Inch mm L D D1 d b E H n-Φd
2" 50 10/16 203 165 125 99 19 3 133 4-Φ19
2.5" 65 10/16 216 185 145 118 19 3 150 4-Φ19
3" 80 10/16 241 200 160 132 19 3 150 8-Φ19
4" 100 10/16 292 220 180 156 19 3 218 8-Φ19
10
6" 150 356 285 240 211 19 3 290 8-Φ23
16
10 8-Φ23
8" 200 495 340 295 266 20 3 330
16 12-Φ23
10 350 12-Φ23
10" 250 622 405 319 22 3 350
16 355 12-Φ28
10 400 12-Φ23
12" 300 698 460 370 24.5 4 376
16 410 12-Φ28
 32

Flanged Y-Type Strainer (V4),

F or F i r e Spr i nkl er System

PN10/16, UL Listed

MATERIAL SPECIFICATION

V4 Part No. Part Standard Specification Options

1 Valve Body EN-GJS-450-10
2 Screen SS304 (Perforated) SS304, SS316 (Perforated, Knitted, Double Screen)
3 Gasket Graphite+Acanthopore Plate EPDM
• Connection Ends: Flange to BS EN 1092-2:1997 4 Bonnet EN-GJS-450-10
5 Plug Malleable Iron Galvanized Bronze ASTM B584
• Working Pressure: PN10/16
6 Bolt Carbon Steel Zinc Plated SS304, SS316
• Temperature Range: -10℃- 200℃ graphite gasket 7 Flat Washer Carbon Steel Zinc Plated SS304, SS316
0℃- 100℃ rubber gasket
• Coating: Fusion Bonded Epoxy Coating in accordance with STANDARD SCREEN
ANSI/AWWA C550 DN Hole Dia. Free Flow Area(%)
Sieve No.
Inch mm mm %
2"~2.5" 50~65 25 4 48
3"~4" 80~100 19 5 59
5" 125 14 6 63
6"~12" 150~300 13 6.3 64
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
PN
Inch mm L D D1 D2 b n-Φd f H
2" 50 10/16 230 165 125 99 19 4-Φ19 3 140
2.5" 65 10/16 290 185 145 118 19 4-Φ19 3 175
3" 80 10/16 310 200 160 132 19 8-Φ19 3 198
4" 100 10/16 350 220 180 156 19 8-Φ19 3 229
5" 125 10/16 400 250 210 184 19 8-Φ19 3 287
6" 150 10/16 480 285 240 211 19 8-Φ23 3 304
10 8-Φ23
8" 200 600 340 295 266 20 3 370.5
16 12-Φ23
10 350 12-Φ23
10" 250 730 405 319 22 3 469
16 355 12-Φ28
10 400 12-Φ23
12" 300 850 460 370 24.5 4 540
16 410 12-Φ28
10 565 530 20-Φ28
18" 450 1200 640 30 4 862
16 585 548 20-Φ31
10 620 582 20-Φ28
20" 500 1250 715 31.5 4 926
16 650 609 20-Φ34
10 725 682 20-Φ31
24" 600 1450 840 36 5 1057
16 770 720 20-Φ37

SHORT STYLE

DN Dimensions(mm)
PN
Inch mm L D D1 D2 b n-Φd f H
10 565 530 20-Φ28
18" 450 850 640 30 4 693
16 585 548 20-Φ31
10 620 582 20-Φ28
20" 500 1000 715 31.5 4 774
16 650 609 20-Φ34
10 725 682 20-Φ31
24" 600 1100 840 36 5 956
16 770 720 20-Φ37
 BS Valves 33

For Fi r e Spr i nkl er System

Landing Valve(SN),
PN10/16

MATERIAL SPECIFICATION

SN Part No. Part Standard Specification

1 Body EN-GJS-450-10
• Thread: ISO 7-1 2 Disc EN-GJS-450-10+EPDM
• Working Pressure: PN10/16 3 Steel Ball SS304

• Temperature Range: 0℃ - 100℃ 4 Inner Hex Screw SS304

5 Stem SS420
• Coating: Fusion Bonded Epoxy Coating in accordance with
6 O-Ring NBR
ANSI/AWWA C550
7 Bonnet EN-GJS-450-10
8 O-Ring NBR
9 Handwheel ABS
10 Screw SS304

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm H1 H2 L d1(Rc) d2 D(R)
2" 50 57.5 109.5 63 2 44.5 2
2.5" 65 71 109.3 71 21/2 58 21/2
 34

Wet Alarm Check Valve

F or F i r e Spr i nkl er System

• Statement:
The alarm check valve works as a check valve by preventing the reverse flow of water from the
system piping to the water supply. The valve is trimmed with a water bypass line, which has an
in-line swing check valve. The bypass line allows pressure surges to enter the system and to
be trapped above the alarm check valve's clapper without the clapper lifting and causing false
alarms.
When a significant flow of water occurs, such as from an open sprinkler, the alarm valve's
clapper lifts and allows water to enter the system. Simultaneously, water enters an intermediate
chamber, which allows the water to activate an alarm either through a water motor alarm or
through a water pressure alarm. These alarms continue to sound until the flow of water is
stopped.

DN Dimensions(mm)
Inch mm OD Equivalent Length of Pipe (m)
3" 80 88.9 4.9
4" 100 114.3 7.9
6" 150 165.1 9.8
6" 150 168.3 9.8
8" 200 219.1 8.2

6.0
RESSURE DDROP – PSI

5.0

4 0
4.0
PRESSURE

3.0

2.0
PR

1.0
0 9
0.9

0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
10 20 30 40 60 80 100 200 300 400 600 1000 2000 4000 6000 10000 20000

FLOW RATE – GPM
 BS Valves 35

For Fi r e Spr i nkl er System

Flanged Wet Alarm Valve
(ZSFZ4X)

MATERIAL SPECIFICATION

Part No. Part Standard Specification Options

1 Valve Body Ductile Iron EN-GJS-450-10
2 Bonnet Ductile Iron EN-GJS-450-10
3 Pin SS304 SS316
4 Hex Bolt Carbon Steel Zinc Plated
ZSFZ4X 5 Gasket EPDM NBR
6 Spring Washer SS304
• Connection Ends: BS EN 1092-2:1997 7 Hex Bolt SS304
• Working Pressure: 1.6MPa 8 Gland Brass H62
9 Seat Bronze ZQSn5-5-5
• Temperature Range: 0℃- 100℃
10 O-Ring NBR EPDM
• Coating: Painting 11 Disc Brass H62
12 Gasket EPDM
13 O-Ring NBR
14 Spring SS321
15 Plug SS304

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

DN Dimensions(mm)
Inch mm A ￠B ￠c H
3" 80 241 80 200 235
4" 100 292 100 220 230
6" 150 356 150 285 298
8" 200 495 200 340 352

External accessories
Part No. Part Part No. Part
16 Pressure switch 23 Ball valve
17 Alarm 24 Check Valve
18 Decelerator 25 Ball valve
19 Strainer 26 Ball valve
20 Pressure gauge 27 Water valve
21 Pressure gauge 28 Ball valve
22 Ball valve
 36

Electric Inspector's Test Connection

F or F i r e Spr i nkl er System

(ZSPM-80-DX)

MATERIAL SPECIFICATION

Part No. Part Standard Specification

1 Test nozzle SS304
2 Outside Hex Bushing Malleable Iron Galvanized
3 Reducing Tee Malleable Iron Galvanized
4 Pressure Switch
5 Nexagon Nipple,Equal Malleable Iron Galvanized
6 Reducing Tee Malleable Iron Galvanized
ZSPM-80-DX
7 Solenoid Valves Brass
8 Pressure Gauge
9 Connector Brass
10 Ball Valve SS304
11 90° Elbow Malleable Iron Galvanized
12 Union With Brass Seat Malleable Iron Galvanized

Note: 1.For special material request other than standard specification, please indicate clearly on the inquiry or oder list.
2.Threads connection options available includes: ASME B1.20.1, ISO 7-1

Manual Inspector's Test Connection

(ZSPM-80-SA)

MATERIAL SPECIFICATION

Part No. Part Standard Specification

1 Test nozzle SS304
2 Outside Hex Bushing Malleable Iron Galvanized
3 Ball Valve SS304
ZSPM-80-SA 4 Nexagon Nipple,Equal Malleable Iron Galvanized
5 Reducing Tee Malleable Iron Galvanized
6 Connector Brass
7 Pressure Gauge

Note: 1.For special material request other than standard specification, please indicate clearly on the inquiry or oder list.
2.Threads connection options available includes: ASME B1.20.1, ISO 7-1
 BS Valves 37

For Fi r e Spr i nkl er System

Hydraulic Control Valve,
Cap Plug (Brass H62)

Up Bonnet (EN-GJS-450-10)

PN10/16/25 Up Gland (EN-GJS-450-10)

Diaphragm (EPDM)
Bottom Gland (EN-GJS-450-10)
Bushing (Brass H62)
• Statement Middle Bonnet (EN-GJS-450-10)
The hydraulic control valve was initially originated in Holand, Israel Stem (SS304)
and Denmark, used for agricultural irrigation. Later the product was Bolt (SS304)
introduced into the United Sates, Canada and Asian countries. It Spring ( Stainless Steel 4Cr13)
was from the 1990s when the product first entered China, and ever Main Disc (EN-GJS-450-10)
Main Gasket (EPDM)
since its entrance it gets rapidly developped and widely applied in Gland of Main Disc (EN-GJS-450-10)
different industrie aside from irrigation. Seat (SS304)

The hydraulic control valve produced by Jinan Meide is new style Valve Body (EN-GJS-450-10)
that absorbed the essence of other well-known brands which makes
Water Head Loss (psi)
it better in energy saving, consumption reducing and accurate
adjusting achieving. The MECH brand hydraulic control valves have
been widely used in China, Europe and South East Asian countries
in pipe system of irrigation, water supplying, fire protection and
air conditioning which has medium of water under 80℃ or other
medium with similar physical and chemical property as water.

• Specifications
Basic Valve: Y-Type Direct-flow DN50
DN65

Connection Ends: Flange to BS EN 1092-2:1997

Flow Rate (gpm)

Temperature Range: 0℃- 100℃ DN80

Working Pressure: PN10/16/25 DN100

Testing Standard: API 598 DN125

DN150
• Flow Diagram of Basic Valve
DN200

DN250

DN300
DN350
DN400
DN450
DN500
DN600

DN 50 65 80 100 125 150 200 250 300 350 400 450 500 600

Kv 41 53 105 175 285 402 730 1160 1400 1770 3010 3225 3395 4272

DN Dimensions(mm)
PN
Inch mm L H D D1 d C T n-ΦL
2" 50 10/16 203 170 165 125 99 19 3 4-Φ19
2.5" 65 10/16 216 195 185 145 118 19 3 4-Φ19
3" 80 10/16 241 215 200 160 132 19 3 8-Φ19
4" 100 10/16 292 255 220 180 156 19 3 8-Φ19
5" 125 10/16 330 290 250 210 184 19 3 8-Φ19
6" 150 10/16 356 360 285 240 211 19 3 8-Φ23
10 495 340 295 266 20 3 8-Φ23
8" 200 450
16 495 340 295 266 20 3 12-Φ23
10 622 405 350 319 22 3 12-Φ23
10" 250 550
16 622 405 355 319 22 3 12-Φ28
10 698 460 400 370 24.5 4 12-Φ23
12" 300 645
16 698 460 410 370 24.5 4 12-Φ28
10 787 505 460 429 24.5 4 16-Φ23
14" 350 700
16 787 520 470 429 26.5 4 16-Φ28
10 914 565 515 480 24.5 4 16-Φ28
16" 400 790
16 914 580 525 480 28 4 16-Φ31
10 978 615 565 530 25.5 4 20-Φ28
18" 450 850
16 978 640 580 548 30 4 20-Φ31
10 978 670 620 582 26.5 4 20-Φ28
20" 500 900
16 978 715 625 609 31.5 4 20-Φ34
10 1295 780 725 682 30 5 20-Φ31
24" 600 1030
16 1295 840 770 720 36 5 20-Φ37
 38

※ Pressure Reducing Valve

F or F i r e Spr i nkl er System

SK720X SK720X1

※ Pressure Relief & Sustaining Valve

SK730X SK730X1

※ Deluge Alarm Valve

SK790X
MECH FLOW SUPPLIES
Malleable Iron Ductile Iron Valves Cast Bronze
Pipe Fittings JINAN MEIDE CASTING CO., LTD.
Grooved Fittings JINAN MEIDE CASTING CO., LTD. JINAN MEIDE CASTING CO., LTD.
Fittings JINAN MEIDE CASTING CO., LTD.

and Couplings

Electrical Malleable Iron Ductile Iron Pipe Fittings Pipe Nipples

Power Fittings JINAN MEIDE CASTING CO., LTD.
Pipe Clamps JINAN MEIDE CASTING CO., LTD.
Cast Iron Pipe Fittings
JINAN MEIDE CASTING CO., LTD. JINAN MEIDE CASTING CO., LTD.

JINAN MEIDE CASTING CO., LTD.

Address: Pingyin Industrial Park, Meigui Zone,
Jinan Meide Technopark, Jinan, China 250400
Phone: (86)531 87885036 87879384
Fax: (86)531 87879387
Email: info@meide-casting.com
Http: //www.meide-casting.com

UPDATED 06/2016