Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 96 views

    Задание на 10.04.2020 170

    Uploaded by

    Миляуша Каримова
    This document discusses three welding methods: manual, semiautomatic, and automatic. [1] Manual welding is the oldest method and involves an operator manually guiding the electrode along the weld joint. [2] Semiautomatic welding is becoming most popular; the electrode is advanced mechanically but positioned manually. [3] Automatic welding is similar but positions and advances the electrode automatically along the prescribed joint.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Задание на 10.04.2020 170

    Uploaded by

    Миляуша Каримова
    96 views2 pages
    This document discusses three welding methods: manual, semiautomatic, and automatic. [1] Manual welding is the oldest method and involves an operator manually guiding the electrode along the weld joint. [2] Semiautomatic welding is becoming most popular; the electrode is advanced mechanically but positioned manually. [3] Automatic welding is similar but positions and advances the electrode automatically along the prescribed joint.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses three welding methods: manual, semiautomatic, and automatic. [1] Manual welding is the oldest method and involves an operator manually guiding the electrode along the weld joint. [2] Semiautomatic welding is becoming most popular; the electrode is advanced mechanically but positioned manually. [3] Automatic welding is similar but positions and advances the electrode automatically along the prescribed joint.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    96 views2 pages

    Задание на 10.04.2020 170

    Uploaded by

    Миляуша Каримова
    This document discusses three welding methods: manual, semiautomatic, and automatic. [1] Manual welding is the oldest method and involves an operator manually guiding the electrode along the weld joint. [2] Semiautomatic welding is becoming most popular; the electrode is advanced mechanically but positioned manually. [3] Automatic welding is similar but positions and advances the electrode automatically along the prescribed joint.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    Задание на 10.04.

    2020
    Тема: Welding methods (Не забудьте написать число и тему!)

    1. Read and translate the text. (Прочитать и устно перевести).

    There are three basic welding methods: manual, semiautomatic and automatic.

    Manual welding is the oldest method, and though its proportion of the total welding market
    diminishes yearly, it is still the most common. Here an operator takes an electrode, clamped in a hand-held
    electrode holder, and manually guides the electrode along the joint as the weld is made. Usually the
    electrode is consumable; as the tip is consumed, the operator manually adjusts the position of the electrode
    to maintain a constant arc length.

    Semiautomatic welding is becoming the most popular welding method. The electrode is usually a
    long length of small-diameter bare wire, usually in coil form, which the welding operator manually positions
    and advances along the weld joint. The consumable electrode is normally motor-driven at a preselected
    speed through the nozzle of a hand-held welding gun or torch.

    Automatic welding is very similar to semiautomatic welding, except that the electrode is
    automatically positioned and advanced along the prescribed weld joint. Either the work may advance below
    the welding head or the mechanized head may move along the weld joint.

    Vocabulary (выписать слова)

    Сable - кабель

    Еarth clamp - заземление

    Еlectrode - электрод

    Holder - электрододержатель

    Transformator - трансформатор

    Power network сеть - электропитания

    Сircuit breaker - выключатель тока

    local exhaust - зонт местной вытяжки


    2. True or False? (Правда/Ложь)

    1. Manual welding is the newest method.

    2. A welder can use manual position during semiautomatic welding.

    3. Semiautomatic welding is the most popular welding method because the weld joint is accurate.

    4. Semiautomatic welding is not the most popular welding method.

    5. The welding operator manually adjusts the position of the electrode to maintain a constant arc
    length.

    3. Welding methods and descriptions. (К каждому методу написать подходящие


    предложения).

    1. manual 2. semiautomatic 3. automatic

    a) the work may advance below the welding head or the mechanized head

    b) the operator manually adjusts the position of the electrode to arc length

    c) the oldest method

    d) the electrode is usually a long length of small-diameter bare wire

    e) the consumable electrode is normally motor-driven at a preselected speed

    f) the electrode is automatically positioned and advanced along the prescribed weld joint.

    4. Find in the text. (Найти в тексте и выписать)

    1) берёт электрод

    2) зажимаемый в электрододержателе для ручного сварочного процесса

    3) вручную проводить электродом по стыку

    4) вручную регулировать положение электрода

    5) поддерживать стабильную длину дуги

    6) электрод большой длины с маленьким диаметром голой проволоки в форме катушки

    7) плавящийся электрод механизируется на заданной скорости через сопло ручной сварочной


    горелки или сварочного пистолета

    8) сварочная или механизированная головка

    Ответы сохраняем под названием ФАМИЛИЯ, ДАТА и отправляем на почту


    miss_karimova_2015@mail.ru до 15.00. Если будут вопросы – пишите. Желаю
    удачи!

    You might also like