Cat 345 GC ®

Hydraulic Excavator

The Cat® 345 GC is a reliable, low-cost-per-hour excavator. It's up to 25 percent more fuel efficient with up to 30 percent less
maintenance cost than its comparative model*. Add in a quiet and comfortable ROPS cab, easy-to-use controls, and several
Cat attachment options and you have a fine machine capable of meeting your various job requirements.
Not all features available in all regions. Consult your Cat dealer for specific configurations available in your region.

High Performance with Lower Fuel Consumption Reliable, High and Low, Heat and Cold
• Get up to 25 percent more fuel efficiency than the 349D2 Tier 3 • Work up to 3300 m (10,830 ft) above sea level.
excavator in similar applications. • Standard high-ambient temperature capability is 52° C (125° F)
• The C9.3B engine can run on biodiesel fuel up to B20 and meets with cold start capability at –18° C (0° F).
Brazil MAR-1 and China Nonroad Stage III emission standards, • Automatic hydraulic oil warm up gets you to work faster in cold
equivalent to U.S. EPA Tier 3 and EU Stage IIIA. temperatures and helps prolong the life of components.
• Match the excavator to the job with two power modes. Smart mode • Advanced fuel filter system protects the engine from dirty diesel fuel.
automatically matches engine and hydraulic power to digging • Grease sealed between track pins and bushings reduces travel noise
conditions, providing max power when needed and reducing power and prevents debris from entering to increase undercarriage life.
when it isn’t to help save fuel.
• Standard built-in protection includes a heavy-duty bottom guard,
• The advanced hydraulic system provides the optimum balance travel motor guard, and swivel protection guard.
of power and efficiency while giving you the control you need
• The sloped track frame prevents mud and debris accumulation,
for precise digging requirements.
helping reduce risk of track damage.
• Valve priority puts hydraulic pressure and flow where you command
it to go for fast light- to medium-load cycle times.
• Advansys™ bucket tips increase penetration and improve cycle
times. Tip changes can be done quickly with a simple lug wrench
instead of a hammer or special tool, improving safety and uptime.
• Add auxiliary hydraulics to do more work with various
Cat attachments.
• Product Link™ comes standard so you can remotely monitor
machine health, location, hours, and fuel consumption on demand
through the VisionLink ® online interface.

*Compared to 349D2 Tier 3.

Cat 345 GC Hydraulic Excavator
®

Work in Comfort in the All-New Cab Maintenance

• The Comfort cab has a wide seat that adjusts for operators • Expect up to 30 percent less maintenance cost than the
of all sizes. 349D2 Tier 3 excavator due to extended and synchronized service
• Control the excavator comfortably with easy-to-reach controls intervals and smaller fluid quantities. (Savings calculated over
all located in front of you. 12,000 machine hours.)
• Standard automatic climate control keeps you at the right • Check hydraulic system oil and easily drain fuel system water
temperature all shift long. from ground level.
• Advanced viscous mounts reduce cab vibration by up to 50 percent • Track your excavator’s filter life and maintenance intervals
over previous excavator models. via the in-cab monitor.
• Stow your gear with plenty of in-cab storage beneath and behind • Change all fuel filters at a synchronized 1,000 hours. Oil and fuel
the seat, overhead, and in the consoles. filters are grouped and located on right-hand side of machine
• Use the standard radio’s USB ports and Bluetooth ® technology for easy maintenance.
to connect to personal devices. • The new air intake filter with precleaner has double the dirt holding
capacity of the previous air intake filter.
• The new hydraulic oil filter provides improved filtration performance,
Simple to Operate anti-drain valves to keep oil clean when the filter is replaced, and
• Start the engine with a push button; use a Bluetooth key fob, longer life with a 3,000 hour replacement interval – 50 percent
smartphone app, or Operator ID passcode. longer than previous filter designs.
• Program your power mode and joystick preferences using • S·O·S SM ports are on ground level, simplifying maintenance and
Operator ID; the excavator will remember them every time allowing for quick, easy extraction of fluid samples for analysis.
you go to work.
• Protect your hammer from overworking. Auto hammer stop warns
you after 15 seconds of continuous firing and then automatically
Safety
shuts it off after 30 seconds – all to prevent wear and tear on the • Keep your excavator secure with Operator ID. Use your PIN code
attachment and excavator. on the monitor to enable the push button starting feature.
• Navigate quickly on the standard high-resolution 203 mm (8 in) • The standard ROPS cab meets ISO 12117-2:2008 requirements.
touchscreen monitor or with the aid of the jog dial control. • A travel direction indicator helps operators know which way to
• The Cat Locator is a Bluetooth device that makes finding your activate the travel levers.
attachments and other gear quick and easy. The Cat App on your • A ground-level shutoff switch stops all fuel to the engine when
phone will locate the device automatically. activated and shuts down the machine.
• Not sure how a function works or how to maintain the excavator? • Enjoy great visibility into the trench, in each swing direction, and
Always have the operator’s manual at your fingertips in the behind you with the help of smaller cab posts and larger windows.
touchscreen monitor. • Serrated steps and anti-skid plates on the service platform help
prevent slipping.
• A rearview camera is standard.

2
 Cat 345 GC Hydraulic Excavator
®

Standard and Optional Equipment

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard Optional Standard Optional

CAB BOOMS AND STICKS
ROPS, standard sound suppression  6.55 m (21'6") Mass boom 
High-resolution 203 mm (8 in) LCD  6.9 m (22'8") Reach boom 
touchscreen monitor 2.55 m (8'4") Mass stick 
Mechanically adjustable seat  2.9 m (9'6") Reach stick 
ENGINE 2.9 m (9'6") HD Reach stick 
Cold start block heaters  3.0 m (9'10") Mass stick 
Two selectable modes: Power, Smart  3.35 m (11'0") Reach stick 
Automatic engine speed control  3.35 m (11') HD Reach stick 
Up to 3300 m (10,830 ft) altitude capability  ELECTRICAL SYSTEM
52° C (126° F) high-ambient  Maintenance-free 1,000 CCA batteries (×2) 
cooling capacity
Centralized electrical disconnect switch 
–18° C (0° F) cold start capability 
LED chassis light, RH and LH boom lights, 
–32° C (–25° F) cold start capability  cab lights
Double element air filter with  CAT TECHNOLOGY
integrated precleaner
Cat Product Link 
Biodiesel capability up to B20 
Auto Hammer Stop 
HYDRAULIC SYSTEM
SERVICE AND MAINTENANCE
Boom and stick regeneration circuit 
Grouped location of engine oil 
Electronic main control valve  and fuel filters
Automatic hydraulic oil warm up  Scheduled Oil Sampling (S·O·S) 
Reverse swing damping valve  sampling ports
Automatic swing parking brake  Electric refueling pump with 
High performance hydraulic return filter  automatic shutoff
Two speed travel  SAFETY AND SECURITY
Bio hydraulic oil capability Caterpillar One Key security system 

Fine swing Lockable external tool/storage box 

Combined two-way auxiliary circuit Lockable door, fuel, and hydraulic 

tank locks
Combined two-way auxiliary circuit 
Lockable fuel drain compartment 
with hammer return filter
UNDERCARRIAGE AND STRUCTURES Service platform with anti-skid plate 
and recessed bolts
Long undercarriage 
RH handrail and hand hold 
Towing eye on base frame  (ISO 2867:2011 Compliant)
9 mt (19,842 lb) counterweight  Signaling/warning horn 
600 mm (24") double grouser, triple  Standard visibility mirror package 
grouser, HD triple grouser track shoes
Ground-level secondary engine 
700 mm (28") triple grouser track shoes  shutoff switch
Rearview camera and 
right-hand-side mirror

Not all features are available in all regions. Please check with your local Cat dealer for specific offering availability in your area.
For additional information, refer to the Technical Specifications brochure available at www.cat.com or your Cat dealer.

3
Cat 345 GC Hydraulic Excavator
®

Technical Specifications

Engine Dimensions
Engine Model C9.3B Boom Reach 6.9 m (22'8")
Engine Power – ISO 9249 258 kW 346 hp Stick Reach R2.9TB (9'6")
Engine Power – ISO 14396 259 kW 347 hp Bucket HD 2.41 m3 (3.15 yd3)
Bore 115 mm 5 in Shipping Height (top of cab) 3230 mm 10'7"
Stroke 149 mm 6 in Handrail Height 3370 mm 11'0"
Displacement 9.3 L 568 in³ Shipping Length 11 620 mm 38'1"
Tail Swing Radius 3530 mm 11'6"
Hydraulic System Counterweight Clearance 1300 mm 4'3"
630 L/min 166 gal/min Ground Clearance 520 mm 1'8"
Main System – Maximum Flow – Implement (315 L/min (83 gal/min Track Length 5030 mm 16'6"
× 2 pumps) × 2 pumps)
Length to Center of Rollers 4040 mm 13'3"
Maximum Pressure – Equipment – Implement 35 000 kPa 5,076 psi
Track Gauge 2740 mm 8'11"
Maximum Pressure – Travel 35 000 kPa 5,076 psi
Transport Width – 600 mm (24") Shoes 3340 mm 10'11"
Maximum Pressure – Swing 28 000 kPa 4,061 psi

Working Ranges and Forces

Swing Mechanism Boom Reach 6.9 m (22'8")
Swing Speed 8.27 rpm
Stick Reach R2.9TB (9'6")
Maximum Swing Torque 155 kN·m 114,543 lbf-ft
Bucket HD 2.41 m3 (3.15 yd3)
Maximum Digging Depth 7200 mm 23'7"
Weights Maximum Reach at Ground Line 11 290 mm 37'0"
Operating Weight 42 200 kg 93,000 lb Maximum Cutting Height 10 540 mm 34'6"
• Reach boom, R2.9TB (9'6") stick, HD 2.41 m³ (3.15 yd³) bucket, 600 mm (24") Maximum Loading Height 7210 mm 23'7"
double grouser shoes, 9 mt (19,842 lb) counterweight.
Minimum Loading Height 3130 mm 10'3"
Maximum Depth Cut for 2240 mm (8'0")
Service Refill Capacities Level Bottom
7040 mm 23'1"
Fuel Tank Capacity 600 L 158.5 gal Maximum Vertical Wall Digging Depth 5390 mm 17'8"
Cooling System 40 L 10.5 gal Bucket Digging Force (ISO) 235 kN 52,860 lbf
Engine Oil (with filter) 32 L 8.5 gal Stick Digging Force (ISO) 198 kN 44,550 lbf
Swing Drive 18 L 4.8 gal
Final Drive (each) 8L 2.1 gal
Hydraulic System (including tank) 423 L 111.7 gal
Hydraulic Tank (including suction pipe) 186 L 49.1 gal

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEXQ2378-01 (09-2019)
© 2019 Caterpillar Replaces AEXQ2378
All rights reserved Build Number: 07A
Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment.
(Afr-ME, CIS, China, Indonesia, S Am, SE Asia)
See your Cat dealer for available options.

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Yellow,” the “Power Edge” and Cat “Modern Hex”
trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.