SL NO Description Part Code

SITC of Audio Decoder which shall be able to integrate minimum 8 separate zones
in one unit, The Audio decoder shall be IP based and capable for different
program to be designated to different zones at the same time. It should be use to
transmit the signal over internet to loudspeaker zones. the controller shall have
all zone mic input to connect emergency microphone for control room. The
Decoder shall have following features: Sampling rate - 8K~48kHz, Frequency
1 response 20 Hz - 16kHz, THD <0.1 %, S/N ratio - >85dB, Zone indicators over NAP4S
voice alarm, priority input and Network audio input, Power Consumption < 40W.

SITC of IP Based Remote paging microphone with full duplex network audio
system with built in one way and two way communication. The Paging
microphone can be install anywhere over LAN and it shall allow several paging
modes include Zone Paging, group paging, all zone paging, two way intercom,
conferencing system , discussion. The Microphone shall have built in LCD display
for program status, and its IP based address. The Microphone shall have built in
2W speaker with good sound clearance to ensure the communication is good and
2 clear, It should have inbuilt Echo cancellation and avoid data delay. The PM8
Microphone shall have following features: Sampling rate - 8 kHz ~48kHz,
THD<0.1%, S/N Ratio >85dB.

SITC of IP Based Fire Alarm Controller with trigger mode NO/NC and it should
have LED alarm zone display. The Fire Controller shall have built in SD card to
store voice message and Panel integrated monitor speaker to monitor the sound
3 output. The Controller should be supply with all kind of accessories to be work EVACBOARD
over IP.

SITC of IP based Network Audio Software compatible with Windows 7 /XP, The
System shall be full duplex system and it can be able to use for Network paging
system and and intercom two systems. The System shall be able to TCP/IP
communication protocol built in decoder to transfer analogue signal to digital
signal. The Server shall have built in weekly timer to program over music or sound
files to automatically broadcast to designated zones at pre set time. Built in
4 System display to surveillance each unit working status, Priority selection, NAP -SOFTWARE
Licenses code registration, Password protection to change the configuration and
user log in, Customized mapped connection diagram shall also be available.

SITC of 120W RMS Single Channel Class-D Digital Power Amplifier with Switch
power technology for power electricity saving, Separate PFC Design for highest
reliability, Separate Power Supply System. Amplifier shall have Following
Features: 120W RMS per Channel, Amplifier Output 100V, Supply input AC 220
5 +/- 10% - 50/60Hz, Short Circuit, Power, Temperature, Overload Protection, Auto DPA120
Cooling Fans. THD <0.1%, Frequency Response 40Hz - 20kHz, AC & DC Fuse, SNR
>89dB.
 SITC of 240W RMS Single Channel Class-D Digital Power Amplifier with Switch
power technology for power electricity saving, Separate PFC Design for highest
reliability, Separate Power Supply System. Amplifier shall have Following
Features: 240W RMS per Channel, Amplifier Output 100V, Supply input AC 220
6 +/- 10% - 50/60Hz, Short Circuit, Power, Temperature, Overload Protection, Auto DPA240
Cooling Fans. THD <0.1%, Frequency Response 40Hz - 20kHz, AC & DC Fuse, SNR
>89dB.

SITC of 500W RMS Single Channel Class-D Digital Power Amplifier with Switch
power technology for power electricity saving, Separate PFC Design for highest
reliability, Separate Power Supply System. Amplifier shall have Following
Features: 500W RMS per Channel, Amplifier Output 100V, Supply input AC 220
7 +/- 10% - 50/60Hz, Short Circuit, Power, Temperature, Overload Protection, Auto DPA500
Cooling Fans. THD <0.1%, Frequency Response 40Hz - 20kHz, AC & DC Fuse, SNR
>89dB.

SITC of 240W RMS Dual Channel Class-D Digital Power Amplifier with Switch
power technology for power electricity saving, Separate PFC Design for highest
reliability, Separate Power Supply System. Amplifier shall have Following
Features: 240W RMS per Channel, Amplifier Output 100V, Supply input AC 220
8 +/- 10% - 50/60Hz, Short Circuit, Power, Temperature, Overload Protection, Auto DPA2240
Cooling Fans. THD <0.1%, Frequency Response 40Hz - 20kHz, AC & DC Fuse, SNR
>89dB.

SITC of 120W RMS Single Channel Power Amplifier with Switch power technology
for power electricity saving, Separate PFC Design for highest reliability, Separate
Power Supply System. Amplifier shall have Following Features: 120W RMS per
Channel, Amplifier Output 100V and 70V, Supply input AC 220 +/- 10% - 50/60Hz,
9 Short Circuit, Power, Temperature, Overload Protection, Auto Cooling Fans. THD HPA120
<0.1%, Frequency Response 60Hz - 15kHz, AC & DC Fuse, SNR >70dB.

SITC of 240W RMS Single Channel Power Amplifier with Switch power technology
for power electricity saving, Separate PFC Design for highest reliability, Separate
Power Supply System. Amplifier shall have Following Features: 240W RMS per
Channel, Amplifier Output 100V and 70V , Supply input AC 220 +/- 10% - 50/60Hz,
9 Short Circuit, Power, Temperature, Overload Protection, Auto Cooling Fans. THD HPA240
<0.1%, Frequency Response 60Hz - 15kHz, AC & DC Fuse, SNR >70dB.

SITC of 480W RMS Single Channel Power Amplifier with Switch power technology
for power electricity saving, Separate PFC Design for highest reliability, Separate
Power Supply System. Amplifier shall have Following Features: 480W RMS per
Channel, Amplifier Output 100V and 70V, Supply input AC 220 +/- 10% - 50/60Hz,
10 Short Circuit, Power, Temperature, Overload Protection, Auto Cooling Fans. THD HPA480
<0.1%, Frequency Response 60Hz - 15kHz, AC & DC Fuse, SNR >70dB.
 SITC of 240W RMS Dual Channel Power Amplifier with Switch power technology
for power electricity saving, Separate PFC Design for highest reliability, Separate
Power Supply System. Amplifier shall have Following Features: 240W RMS per
Channel, Amplifier Output 100V and 70V, Supply input AC 220 +/- 10% - 50/60Hz,
11 Short Circuit, Power, Temperature, Overload Protection, Auto Cooling Fans. THD HPA2240
<0.1%, Frequency Response 60Hz - 15kHz, AC & DC Fuse, SNR >70dB.

SITC of 6W Recessed Ceiling speakers with following features:-Speaker Drive 3",

Complete metal grille and line matching transformer 100/70V line. Variable
wattage tapings of 6 / 3 at 100v, Effective frequency range 100-20kHz (BS6840),
12 SPL@1m/1W=88dB, Peak SPL 96dB complete with necessary mounting hardware CMS3/T
& accessories.

SITC of 6W Recessed Ceiling speakers with following features:-Speaker Drive 4",

Complete metal grille and line matching transformer 100/70V line. Variable
wattage tapings of 6 / 3 / 1.5 at 100v, Effective frequency range 90-18kHz
13 (BS6840), SPL@1m/1W=90dB, Peak SPL 98dB complete with necessary mounting CMS4/T
hardware & accessories.

SITC of 6W Recessed Ceiling speakers with following features:-Speaker Drive 5",

Complete metal grille and line matching transformer 100/70V line. Variable
wattage tapings of 6 / 3/ 1.5 at 100v, Effective frequency range 110-15kHz
14 (BS6840), SPL@1m/1W=91dB, Peak SPL 97dB complete with necessary mounting CMS5/T
hardware & accessories.

SITC of 6W fireproof Ceiling speakers with following features:-Speaker Drive 5",

Complete Aluminium grille and line matching transformer 100/70V line. Variable
wattage tapings of 6 / 3/ 1.5 at 100v, Effective frequency range 130-15kHz
15 (BS6840), SPL@1m/1W=92dB, Peak SPL 97dB complete with necessary mounting FCMS5/DIN
hardware & accessories.

SITC of 6W wall mount speakers with following features:-component 7.5",

Complete metal grille and line matching transformer 100/70V line. Variable
wattage tapings of 5/10W, Effective frequency range 150-15kHz (BS6840),
16 SPL@1m/1W=90dB, Peak SPL 98dB complete with necessary mounting hardware SML 6/T
& accessories.

SITC of 10W wall mount speakers with following features:-component 6.5",

Complete metal grille and line matching transformer 100/70V line. Variable
wattage tapings of 5/10W, Effective frequency range 150-15kHz (BS6840),
17 SPL@1m/1W=88dB, Peak SPL 96dB complete with necessary mounting hardware SMS 10/T
& accessories.

SITC of 15W Two way wall mount speakers with following features:-component
4"+1.5", Complete metal grille and line matching transformer 100/70V line.
Variable wattage tapings of 15/7.5W, Effective frequency range 110-15kHz
18 (BS6840), SPL@1m/1W=88dB, Peak SPL 99dB complete with necessary mounting WS 15/T
hardware & accessories.
 SITC of 30W Two way wall mount speakers with following features:-component
5"+1.5", Complete metal grille and line matching transformer 100/70V line.
Variable wattage tapings of 15/30W, Effective frequency range 130-15kHz
19 (BS6840), SPL@1m/1W=91dB, Peak SPL 106dB complete with necessary WS 30/T
mounting hardware & accessories.

SITC of 20W Unidirectional projection loudspeakers with following features:-

component 2*6", Complete metal grille and line matching transformer 100/70V
line. Variable wattage tapings of 5/10/20W, Effective frequency range 100-15kHz
20 (BS6840), SPL@1m/1W=91dB, Peak SPL 110dB complete with necessary PS 20/T
mounting hardware & accessories.

SITC of 10W Weatherproof horn speakers with following features:- Complete

metal grille and line matching transformer 100/70V line. Variable wattage tapings
of 10/15W, Effective frequency range 250-18kHz (BS6840), SPL@1m/1W=102dB,
21 Peak SPL 112dB complete with necessary mounting hardware & accessories. OHS15/T

SITC of 25W Weatherproof horn speakers with following features:- Complete

metal grille and line matching transformer 100/70V line. Variable wattage tapings
of 25/12.5W, Effective frequency range 250-6kHz (BS6840), SPL@1m/1W=110dB,
22 Peak SPL 124dB complete with necessary mounting hardware & accessories. OHS30/T
QTY Unit UNIT PRICE AMOUNT REMARKS

NOS

NOS

NOS

NOS

NOS
1

NOS

NOS

NOS

NOS

NOS

NOS
1

NOS

NOS

NOS

NOS

NOS

NOS

NOS

NOS
1

NOS

NOS

NOS

NOS