Technical specification

Binding agent spreader TC series

SW 10 TC | SW 16 TC
02
03
Technical specification

Binding agent spreader Binding agent spreader

SW 10 TC SW 16 TC

Container

Container capacity 10 m3 16 m3

Size of filling connector / filling hose 3”/4”/5”

Conveyor chain

Width of conveyor chain 950 mm

Opening height of slide gate 350 mm

Spreading unit (metering feeders)

Working width / partial widths 2,460 mm / 3 x 820 mm

Spreading quantity at 2 km / h *1 1 – 60 l / m2

Hydraulic system

Max. hydraulic power 75 l / min x 300 bar

Capacity of hydraulic fluid tank 100 l

Weights

Empty weight *2, approx.   5,000 kg   6,800 kg

Permissible total weight *3    13,000 kg *5 21,000 kg

Technically permissible total weight 15,000 kg 27,000 kg

Tyres

Standard tyre size 710 / 50 – 30.5 710 / 45 – 26.5

Permissible travel speed *3 25 km / h

Transport dimensions (L x W x H)*4, approx. 6,700 x 2,660 x 3,100 mm 8,200 x 2,760 x 3,250 mm

Tractor requirements

Recommended engine power > 90 kW / 120 PS (all-wheel) > 130 kW / 180 PS (all-wheel)

Required speed of driveshaft 1,000 min-1

Tongue load at towing gear 3,000 kg *5 3,000 kg *5

Electrical system 12 V / 30 A

*1 = quantity applied depends on various parameters (e.g. binder, feeding unit and job-site conditions)
*2 = basic machine without any additional equipment
*3 = on public roads, adhering to the German Road Traffic Licensing Regulations (StVZO)
*4 = with standard tyres, when mounted
*5 = minus 1 t for Rockinger drawbar
 Dimensions
04
05
Binding agent spreader SW 10 TC

750 4,600 2,400

Rockinger

Hitch

3,100
1,000

1,800 2,460
500 –700

6,700 2,660

Binding agent spreader SW 16 TC

750 6,100 2,400

3,250

1,600 1,500 2,460

500 –700

8,200 2,760

Dimensions in mm
 Transport of binding agent spreader SW 10 TC

300 kg 750 4,600 2,400

per wheel

2,750
1,500

1,500 7,050 2,550

Transport of binding agent spreader SW 16 TC

240 kg 750 6,100 2,400

per wheel
2,900
1,500

2,700 8,200 2,550

Dimensions in mm
 Equipment features
06
07

SW 10 TC SW 16 TC

Container / chassis
Lockable side doors
Storage compartments
Loading and lashing lugs
Single-axle chassis with spring-loaded drawbar –
Tandem-axle chassis with spring-loaded drawbar –
Hydraulic support foot
Relief cover on the conveyor chains to prevent material building up in the container
Vent pipe and pressure relief flap integrated into the container
3” pneumatic filling device on both sides
4” pneumatic filling device on both sides –
4” high-speed pneumatic filling device on both sides –
Filling device with stone filter
Hydraulic slide gate
Filling chute with 2 sensor-controlled transverse augers
Sensor-controlled conveyor chain
Sensor-controlled conveyor chain
Closed on-board hydraulic system (Load sensing)
Hydraulic oil cooler
Oil flow control valve
Hydraulic system grouped together in a valve block for easy servicing
Electronic weighing device *1
“WeighTronic” electronic weighing device with automatic adjustment
Speed sensor mounted on the wheels
Radar unit for speed sensing
Control terminal
Infinite adjustment of the quantity to be spread
Level indicator “Container full” or “empty”
“Standard” drive on both sides
“OptiPower” drive on both sides –
Auxiliary engine for operation independently of the carrying vehicle or tractor

*1 = cannot be calibrated

  = standard equipment
  = optional equipment
–   = not available
 SW 10 TC SW 16 TC

Spreading unit
Size DN 230-10 rotary feeding unit
High-performance size DN 410-17 rotary feeding unit
Self-cleaning rotary feeders
Three separately controlled part-widths
All-automatic dosing, regardless of the travel speed
Drive adaptations
Wide-angle drive shaft
Miscellaneous
Dust protection
Access ladder
Bag filter package
Automatic dust-collecting filter system
Rotary compressor for automatic filling from a stationary silo and / or for cleaning the machine
Job data printer for documenting consumption of binding agent and performance per unit area
Monitor system for monitoring the rear working area
Water spray system with water tank to reduce dust formation
during the spreading process
High-pressure cleaner with water tank
Lighting package with 4 LED working lights
Collecting pan and digital suspended scales for checking the spread quantity
 WIRTGEN GmbH
Reinhard-Wirtgen-Str. 2 · 53578 Windhagen · Germany
Phone: +49 (0) 26 45 / 131-0 · Fax: +49 (0) 26 45 / 131-392
Made by STREUMASTER Maschinenbau GmbH Internet: www.wirtgen.com · E-mail: info@wirtgen.com

Illustrations are without obligation. Technical details are subject to change without notice. Performance data depend upon operating conditions.
Nr. 2525052 EN-04/16 © by WIRTGEN GmbH 2016. Printed in Germany.