Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.

0) 1

Address:
Postal address:
Phone:
Fax:
E-mail:
Homepage:

Mechanic:
Date: 8/2/2018
Car licence no:
VIN:
Mileage:
Vehicle: MAN - TGA - 2002

Fault codes
Diesel (Engine control - MS6.1 Bosch)
DTC Description
No fault codes

Brake (EBS - EBS 2.2 Knorr - 2 Axle)

DTC Description
No fault codes

3201 - Pressure control module, left rear axle, interruption, short-circuit wheel sensor
A
- Unknown fault symptom
- Permanent
Frequency counter 15
Priority 0

3261 - Pressure control module, right rear axle, interruption, short-circuit wheel sensor
B
- Unknown fault symptom
- Permanent
Frequency counter 15
Priority 0

3171 - Pressure control module, right front axle, pad wear sensor A outside permitted
value range
- Unknown fault symptom
- Permanent
Frequency counter 15
Priority 0

3440 - Trailer control module, no CAN reception from trailer control module
- Unknown fault symptom
- Stored
Frequency counter 2
Priority 0

3194 - Pressure control module, right front axle, arithmetic test not successful
- Unknown fault symptom
- Stored
Frequency counter 1
Priority 0
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 2

Brake (EBS - EBS 2.2 Knorr - 2 Axle)

DTC Description

3244 - Pressure control module, left rear axle, arithmetic test not successful
- Unknown fault symptom
- Stored
Frequency counter 1
Priority 0

3050 - CAN data bus driveline; bus off

- Unknown fault symptom
- Stored
Frequency counter 1
Priority 0

3059 - CAN data bus driveline; receive time exceeded in high resolution vehicle
distance message from tachograph
- Unknown fault symptom
- Stored
Frequency counter 6
Priority 0

3058 - CAN data bus driveline; receive time exceeded in ERC1_EX message from
vehicle management computer
- Unknown fault symptom
- Stored
Frequency counter 2
Priority 0

3062 - CAN data bus driveline; receive time exceeded in Cruise Control/Vehicle
Speed message from the EDC via vehicle management computer
- Unknown fault symptom
- Stored
Frequency counter 2
Priority 0

3061 - CAN data bus driveline; receive time exceeded in EEC3 message from the
EDC
- Unknown fault symptom
- Stored
Frequency counter 2
Priority 0

3051 - CAN data bus driveline; receive time exceeded in EEC1 message from the
EDC
- Unknown fault symptom
- Stored
Frequency counter 1
Priority 0
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 3

Brake (Retarder - Intarder ZF)

DTC Description
4001 - Accumulator charge valve
- Open circuit
- Permanent
Frequency counter 1
Priority 1

4001 - Accumulator charge valve

- Open circuit
- Permanent
Frequency counter 1
Priority 1

4018 - Fault memory, system error

- Unknown fault symptom
- Permanent
Frequency counter 1
Priority 3

4029 - CAN data bus; message TCO1 from tachograph

- Signal missing or faulty
- Stored
Frequency counter 4
Priority 1

4039 - CAN data bus; mileage message HRVD from tachograph

- Signal missing or faulty
- Stored
Frequency counter 1
Priority 1

4038 - CAN data bus; time/date message from tachograph

- Signal missing or faulty
- Stored
Frequency counter 1
Priority 1

Brake (Retarder - Intarder ZF) (after last fault code deletion)

DTC Description
4001 - Accumulator charge valve
- Open circuit
- Permanent
Frequency counter 1
Priority 1

Instrument (Instrument - Stoneridge Highline)

DTC Description
No fault codes

8103 - Failure of message TCO1 (speed, reset trip counter)

- Signal missing or faulty
- Stored
Frequency counter 4
Priority 0
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 4

Instrument (Instrument - Stoneridge Highline)

DTC Description
8106 - Failure of ECAM1 message (reservoir pressures for brake)
- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0

8107 - Failure of Dash Display/Fuel Level message

- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0

8108 - Failure of Engine Temperature sensor

- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0

8111 - Failure of Inlet/Exhaust Conditions message (boost pressure bar)

- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0

8109 - Failure of ETC2 message (gear information)

- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0

8130 - Failure of CC/VHS message (cruise control function)

- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0

8110 - Failure of ETC3 message (splitter group)

- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0

8112 - Failure of EEC1 message (engine speed display)

- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0

8113 - Failure of Ambient Conditions message (external temperature display)

- Signal missing or faulty
- Stored
Frequency counter 6
Priority 0
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 5

Gearbox (Gearbox - Astronic ZF) (after last fault code deletion)

DTC Description
3198 - CAN data bus; relative wheel speed from EBS, EBC2 WSI (relative wheel
speed)
- Faulty signal
- Permanent
Frequency counter 1
Priority 0

Gearbox (Gearbox - Astronic ZF)

DTC Description
3198 - CAN data bus; relative wheel speed from EBS, EBC2 WSI (relative wheel
speed)
- Faulty signal
- Permanent
Frequency counter 4
Priority 0

Multifunction (FFR (Drive control) - VDO)

DTC Description
3089 - CAN data bus: Time overrun when receiving central on-board computer
message Veh_Disp
- Unknown fault symptom
- stored
Frequency counter 2
Priority 5

3300 - Control unit or cable line (engine brake output stage)

- Short circuit to ground
- stored
Frequency counter 14
Priority 2

3208 - CAN data bus; Astronic message ETC2

- faulty signal
- stored
Frequency counter 6
Priority 3

98 - Engine oil level

- too high
- stored
Frequency counter 15
Priority 5

639 - SAE J1939 Data link

- Signal missing
- stored
Frequency counter 10
Priority 2

697 - Accelerator pedal PWM1 signal

- Signal missing
- stored
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 6

Multifunction (FFR (Drive control) - VDO)

DTC Description
Frequency counter 1
Priority 2

3277 - No engine CAN

- Unknown fault symptom
- stored
Frequency counter 1
Priority 2

3081 - CAN data bus: Time overrun when receiving EBS message EBC1
- Unknown fault symptom
- stored
Frequency counter 1
Priority 5

3099 - CAN databus: Time overrun when receiving ECAM message ECAM1
- Unknown fault symptom
- stored
Frequency counter 14
Priority 5

3097 - CAN data bus: Time overrun when receiving ECAS message ECAS1
- Unknown fault symptom
- stored
Frequency counter 1
Priority 5

3197 - CAN data bus; Astronic message ETC1

- faulty signal
- stored
Frequency counter 4
Priority 3

3195 - CAN data bus: Retarder message ERC1_RD

- faulty signal
- stored
Frequency counter 3
Priority 3

3088 - CAN data bus: Time overrun when receiving tachograph message TCO1
- Unknown fault symptom
- stored
Frequency counter 3
Priority 5

3279 - No speed signal (torque and engine speed limiting initiated)

- Signal missing
- stored
Frequency counter 5
Priority 2

3179 - CAN data bus; EBS message Veh_weight

- faulty signal
- stored
Frequency counter 1
Priority 3
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 7

Multifunction (FFR (Drive control) - VDO)

DTC Description
3155 - CAN data bus; EBS message EBC2
- faulty signal
- stored
Frequency counter 1
Priority 3

Suspension (Air Suspension - ECAS1 Wabco)

DTC Description
3201 - Solenoid valve 2/2 left REAR AXLE
- open circuit
- stored
Frequency counter 1
Priority 2

3062 - CAN message VSC1

- Signal missing
- stored
Frequency counter 1
Priority 2

3063 - CAN message EEC1

- Signal missing
- stored
Frequency counter 1
Priority 2

3065 - CAN message FFR_1

- Signal missing
- stored
Frequency counter 1
Priority 2
Delphi DS150E Heavy Duty Vehicles (New VCI) | 2015 Release 3 (2.15.3.0) 8

Suspension (Air Suspension - ECAS1 Wabco) (after last fault code deletion)
DTC Description
3201 - Solenoid valve 2/2 left REAR AXLE
- open circuit
- stored
Frequency counter 1
Priority 2

3062 - CAN message VSC1

- Signal missing
- stored
Frequency counter 1
Priority 2

3063 - CAN message EEC1

- Signal missing
- stored
Frequency counter 1
Priority 2

3065 - CAN message FFR_1

- Signal missing
- stored
Frequency counter 1
Priority 2