Compendium On Methods and Tools To Evaluate Impacts Of, and Vulnerability and Adaptation To, Climate Change

Compendium on methods and
tools to evaluate impacts of, and

vulnerability and adaptation to,
climate change
UNFCCC Secretariat
with the services of:
Erica Pinto
Robert C. Kay and Ailbhe Travers, CZM pty. Ltd
Stratus Consulting Inc.
February 2008
1. Introduction
Parties to the United Nations Framework Convention on Climate Change (UNFCCC) are
obligated by the Convention and various decisions of the Conference of the Parties (COP) to
assess their national-level impacts of climate change and their efforts to adapt to these impacts as
inputs for their national communications. Parties need to select from a daunting array of
potentially applicable methods and tools for making these assessments, and from various sources
of information concerning their use. New methods and tools are constantly being developed and
the application of those that are already in use is steadily being refined. There is therefore a need
for a centralized source of information that can be maintained and regularly updated.
In 1999, the UNFCCC Secretariat took a first step towards disseminating information on
methods and tools when it produced a report entitled Compendium of Decision Tools to Evaluate
Strategies for Adaptation to Climate Change. Since then, the adaptation assessment process has
changed considerably and in some ways grown more sophisticated. The UNFCCC Secretariat
has subsequently updated the original compendium and broadened its scope. An updated
compendium entitled Compendium of methods and tools to evaluate impacts of, and
vulnerability and adaptation to, climate change was launched in 2004.
The current revision of the compendium was undertaken as part of the Nairobi work programme
on impacts, vulnerability and adaptation to climate change. Among its activities the work
programme seeks to:
• Promote the development and dissemination of methodologies and tools for impact and
vulnerability assessments, such as rapid assessments and bottom-up approaches,
including as they apply to sustainable development
• Promote the development and dissemination of methods and tools for assessment and
improvement of adaptation planning, measures and actions, and integration with
sustainable development.
The revision draws on information provided by Parties and organizations on existing and
emerging assessment methodologies and tools; and views on lessons learned from their
application; opportunities, gaps, needs, constraints and barriers; possible ways to develop and
better disseminate methods and tools; and training opportunities. The submissions and a
synthesis report can be found on the UNFCCC website (http://unfccc.int/3922.php).
Page 1-1
The challenge of continuously updating is not only to expand the structure of the compendium to
include new tools that have come into use and to modify it to include tools applicable to the
entire process of vulnerability and adaptation assessment (not simply decision making), but also
to reorganize it so as to capture the range of thinking reflected in the different recent approaches
to the assessment process.
The earlier work (sometimes referred to as the first generation) in climate change impacts and
adaptation studies focused more on impacts than on adaptation. The motivation for the research
was often driven by the need to understand how great the impacts of climate change might be to
know how much urgency to give to the mitigation agenda or the stabilization of greenhouse gas
concentrations in the atmosphere. This work was facilitated by a number of “guidance
documents,” among which the most prominent were:
SCOPE Report on impact Assessments (Kates et al., 1985)
Intergovernmental Panel on Climate Change (IPCC) Guidelines (Carter et al., 1994; see
Chapter 2 of this document)
U.S. Country Studies Program (Benioff et al., 1996; see Chapter 2 of this document)
United Nations Environment Programme (UNEP) Handbook (Feenstra et. al., 1988).
The first generation studies were generally based on climate scenarios derived from general
circulation models (GCMs). The chosen scenarios were commonly applied to models of
ecosystems, to specific species within an ecosystem, or to a component of the biogeophysical
environment such as sea level; coastal zones, including coral reefs; the hydrological cycle;
mountains; deserts; or small islands. These “first order” impacts were sometimes carried forward
to the modeling of “second order” impacts on economic sectors such as agriculture, forestry,
water resource management, human health, and so forth. Only at the end of a long research
process was adaptation considered, and only infrequently were socioeconomic scenarios
developed alongside the climate scenarios.
More recently there has been an upsurge in interest and concern about adaptation linked to
current climate variability and current vulnerability in addition to the concern with future climate
and vulnerability. The context has also been broadened to include other environmental and social
stressors, and changes in socioeconomic conditions and sustainable development.
This change in emphasis has led to the development of a second generation of studies that begin
with current climate variability and current adaptation (or the lack of adaptation or
maladaptation). This empirical approach provides a grounding in reality on which to base
projections of future impacts, vulnerability, and adaptation. New methods, frameworks, and
guidelines are being developed to facilitate second order studies, including:
Page 1-2
The United Nations Development Programme (UNDP) Adaptation Policy Framework
(Burton et al., 2004; see Chapter 2 of this document)
The National Adaptation Programmes of Action (NAPA) Guidelines (UNFCC, 2002; see
Chapter 2 of this document)
The Assessments of Impacts and Adaptations to Climate Change (AIACC) projects (see
Chapter 2 of this document).
Much of the work under way includes a blend of first and second-generation approaches and
tools, and the research approaches are evolving rapidly, as is to be expected in a relatively new
area of research and study. The more recent emphasis on current climate variability, and current
vulnerability and adaptation, has been associated with more sophisticated approaches to
socioeconomic scenarios, to stakeholder participation, to adaptation policies and measures, and
to the assessment and strengthening of adaptation capacity. These changes are reflected in the
content and structure of this updated version of the compendium, making it more relevant to
today’s needs. This is not the end of the road, however. As understanding of climate change
impacts expands and as social and economic circumstances change, there will be a continued
need for new approaches and new research tools and methods. Users of this compendium are
thus challenged to go past the role of passive users and to make their own contributions to the
improvement of methods and tools.
1.1 Focus and Scope of the Compendium

This updated compendium is organized in a way that allows existing adaptation analysis and
decision frameworks and tools to be catalogued in manner that is clear and easy to use and does
not prescribe or recommend methods or tools. Whereas the original compendium for the most
part organized discrete adaptation decision tools according to sectors of application, echoing the
sectoral model based approach to vulnerability and adaptation assessment of the time, the
organization of this revised compendium reflects the expanded scope and comprehensiveness of
methods currently in use.
Thus, the revised compendium attempts to reflect the current state of knowledge by collecting
and summarizing three broad categories of frameworks, methods, and tools. First, it reviews
some of the complete frameworks (both what are previously referred to as first generation
approaches and second generation approaches), those methods that prescribe an entire process
for the assessment of vulnerability and adaptation and in some instances assemble toolkits to
support this process. These frameworks offer a broad strategic approach.
Second, the compendium establishes a structure for cataloging tools that assist in addressing key
cross-cutting themes or whose application spans multiple steps of the assessment process, as well
Page 1-3
as discrete tools that are applicable to multiple sectors. These are not comprehensive
frameworks, nor are they tools applicable only to a specific sector and step of an assessment
framework. Some constitute partial frameworks or particular research orientations that prescribe
an approach to undertaking an assessment (e.g., stakeholder analysis) and can be applied at
various stages of the assessment. Others are tools that are applicable to more than one sector or
tend to address a particular stage of an assessment (e.g., GCM downscaling, socioeconomic
scenario building, decision making).
Third, as the first version of the compendium did, this revised version organizes discrete tools
specific to particular sectors. Much of the content of the original compendium has been
conserved here. We have significantly updated the agriculture sector to reflect the development
and use of new methods and tools.
The compendium is intended for use by either assessment managers or technical researchers; it
does not require extensive technical knowledge of modeling or specific decision-making
techniques. Some of the frameworks and tools described in the compendium may require
particular expertise, and these requirements are explicitly described.
The compendium provides users with key information about available frameworks and tools,
special features of each framework or tool, and information about how to obtain documentation,
training, or publications supporting each tool. It has been designed to be used as a reference
document to identify available frameworks and tools for assessing vulnerability and adaptation.
This is not a manual describing how to implement each tool, but rather a survey of possible tools
that can be applied to a broad spectrum of situations and a map to point users to additional
sources of information.
Each framework or tool is described in a summary table that summarizes its key features. With
these tables as a reference, users can decide which frameworks and tools they want to use and
then can obtain further documentation for the listed contact to fully evaluate each option. Each
tool has been summarized to identify its potential applications. Looking at the resources
available and the individual needs of the project, the user can identify which tools may be most
appropriate to analyze the adaptation options they are considering.
The compendium is not a “cookbook.” It does not provide full documentation for frameworks,
models, or other tools. Users will need to obtain this information from the providers.
Furthermore, users should carefully consider the alternative frameworks and tools discussed in
the compendium. The appropriateness and usefulness of each may vary depending on users’
circumstances and information needs. Options for analysis should be carefully investigated and
considered.
Tables include relevant topics from the following list:
Page 1-4
Description. Explains the type of framework or tool being presented (e.g., spreadsheet,
process-based model) and what type of information this tool helps the user to evaluate
(e.g., monetary costs, human health risks). This area also provides a basic summary of
how the tool works, including the type of data required and the processes used to evaluate
these data.
Appropriate use. Describes where the framework or tool is (and is not) applicable. This
gives the user an idea of the stage at which it is appropriate to use.
Scope. Covers the fields in which the framework or tool is applicable, including
geographic (i.e., whether it is specific to a particular region) and assessment
characteristics (e.g., national or site-specific).
Key output. Describes the final product of the framework or tool (e.g., a model, a cost-
effectiveness evaluation, an organizing framework).
Key input. Explains the information or data required to use the framework or tool.
Key tools. For frameworks, describes discrete tools that would play an important role in
implementing a complete framework.
Ease of use. Describes the level of difficulty associated with implementing the
framework or tool.
Training required. Describes the level of expertise and any specific skills required to use
the framework or tool effectively.
Training available. Describes the training available to learn how to use the framework or
tool effectively.
Computer requirements. Describes the computer hardware and software necessary to use
the framework or tool.
Documentation. Provides the citations for sources describing in detail how to use the
framework or tool. Generally this is a user’s manual or similar document.
Applications. Briefly describes actual cases and projects where the framework or tool has
been applied.
Contacts for framework/tools, documentation, technical assistance. Provides

information on who to contact for further information, documentation, and technical
assistance. Generally the agency or firm that developed the framework or tool, or, for
Page 1-5
several of the tools applicable to multiple sectors, someone who can provide a reference
to an expert for a particular application.
Cost. Provides the monetary cost of obtaining documentation or software for the
framework or tool. Where applicable, gives information on the approximate cost of
implementing the framework or tool. Where the exact cost is unavailable, relative cost is
used (e.g., high, medium, or low relative to other described).
References. Lists the citations for documents, articles, etc., that have critically discussed
use of the framework or tool.
Finally, this compendium is part of an ongoing process and should be considered a living
document. As the frameworks and tools it describes are used and field tested, they will be
steadily improved and their application refined. Furthermore, the compendium is in no way
intended to provide a comprehensive listing of approaches, cross-cutting issues, or sectors or of
the potential frameworks and tools that might be characterized as such. Rather, the hope is to set
up a structure that will accommodate the addition of other tools and frameworks currently in use
as well as new approaches that will be developed in the future.
Notes on using the compendium
Summary tables in the compendium provide an overview of the framework or tool in question. They are
designed to assist the user in identifying methods and techniques to investigate further. The main function is to
direct users how to obtain more information, not to instruct the user on how to apply any particular framework
or tool.
Many of the frameworks and tools overlap with one another. They should not be thought of as representing
discrete points on a continuum, embodying either-or choices. Users may find that more than one framework or
tool might be suited to their goals. It may be that users might benefit from combining elements of different
methods or techniques that are profiled here.
The compendium is intended to be a living document. It reflects the state of knowledge at the time it was
compiled. Additionally, it provides a structure that should allow it to grow to incorporate new frameworks and
tools.
Page 1-6
1.2 Organization of the Compendium
Chapters 2, 3, and 4 of the compendium contain the summary tables that describe each
framework or tool. Table 1.1 summarizes their organization and lists the frameworks and tools
described in the compendium.
Table 1.1. Organization of frameworks and tools in the compendium
Chapter 2: Complete Frameworks and Supporting Toolkits

IPCC Technical Guidelines for Assessing Climate Change Impacts and Adaptations
U.S. Country Studies Program (USCSP)
UNDP Adaptation Policy Framework (APF)
Assessments of Impacts and Adaptations to Climate Change in Multiple Regions and Sectors (AIACC)
Guidelines for the Preparation of National Adaptation Programmes of Action (NAPA)
United Kingdom Climate Impacts Programme (UKCIP) Climate Adaptation: Risk, Uncertainty and
Decision Making
Chapter 3: Cross-Cutting Issues and Multisector Approaches
3.1 Development and Application of Scenarios
3.1.1 General tools
IPCC-TGCIA Guidelines on the Use of Scenario Data for Climate Impact and Adaptation
Assessment
The Climate Impacts LINK Project
NCEP Global Ocean Data Assimilation System (GODAS)
RClimDex
SimCLIM
UKCIP02 Climate Change Scenarios
Climate Information and Prediction Services (CLIPS) Project and Regional Climate Outlook
Forums (RCOFs)
3.1.2 Climate downscaling techniques
Statistical Downscaling
Statistical DownScaling Model (SDSM)
Dynamical Downscaling
MAGICC/SCENGEN
Weather Generators
COSMIC2 (COuntry Specific Model for Intertemporal Climate Vers. 2)
PRECIS (Providing REgional Climates for Impacts Studies)
Page 1-7
Table 1.1. Organization of frameworks and tools in the compendium (cont.)
3.1.3 Socioeconomic scenarios
Developing Socioeconomic Scenarios: For Use in Vulnerability and Adaptation Assessments
Adoption of Existing Socioeconomic Scenarios
Qualitative and Quantitative Scenarios Emphasizing Stakeholder Input
UKCIP Socio-Economic Scenarios
3.2 Decision Tools
Policy Exercise
Benefit-Cost Analysis
Cost-Effectiveness
Multicriteria Analysis (MCA)
Tool for Environmental Assessment and Management (TEAM)
Adaptation Decision Matrix (ADM)
Screening of Adaptation Options
Climate-Related Risks Estimate as Indicators of Necessity for Adaptation Responses
Costing the Impacts of Climate Change in the UK
Identifying Adaptation Options
UKCIP Adaptation Wizard
Adaptation Actions
Business Area Climate Impacts Assessment Tool (BACLIAT)
Nottingham Declaration Action Pack (NDAP)
Community-based Risk Screening Tool – Adaptation & Livelihoods (CRiSTAL)
3.3 Stakeholder Approaches
Stakeholder Networks and Institutions
Scoping
Vulnerability Indices
Agent Based Social Simulation
Livelihood Sensitivity Exercise
Multistakeholder Processes
Global Sustainability Scenarios
MPPACC (Model of Private Proactive Adaptation to Climate Change)
3.4 Other Multisector Tools
Climatic Change and Variability (CCAV)
Expert Judgment
Page 1-8
Historical or Geographic Analogs: Forecasting by Analogy
Uncertainty and Risk Analysis
Estimating Adaptation Costs: M-CACES
Impacts Database
PAGE2002 (Policy Analysis for the Greenhouse Effect)
Resource Approach to Assessment of Climate Change Impact on Human Activity
Comprehensive Hazard and Risk Management (CHARM)
Community-Based Disaster Risk Management Field Practitioners’ Handbook
Guidelines for Emergency Assessment
Guidelines on Climate Watches
Natural Disaster Mitigation in Drinking Water and Sewerage Systems: Guidelines for Vulnerability
Analysis
Handbook for Estimating the Socio-Economic and Environmental Effects of Disasters
The Good Practice Guide: Community Awareness and Education in Emergency Management
Chapter 4: Sector-Specific Tools
4.1 Agriculture Sector Tools
APSIM (Agricultural Production Systems sIMulator)
WOFOST
ACRU (Agricultural Catchments Research Unit)
Process Soil and Crop Models: CENTURY
ORYZA 2000
Information and Decision Support System for Climate Change Studies in South East South
America (IDSS-SESA Climate Change)
Decision Support Systems Linking Agro-Climatic Indices with GCM-Originated Climate Change
Scenarios
Model of Agricultural Adaptation to Climatic Variation (MAACV)
Relative Risk Index (RRI)
Government Support in Agriculture for Losses due to Climatic Variability
AgroMetShell
Agroclimatic Water Stress Mapping
Local Climate Estimator (New_LocClim)
FAOClim 2.0
CLIMWAT 2.0
CM Box
Page 1-9
CLOUD (Climate Outlooks and Agent-based Simulation of Adaptation in Africa)

CRAM (Canadian Regional Agriculture Model)
Process Crop Models: Decision Support System for Agrotechnology Transfer (DSSAT) developed
under the International Consortium for Agricultural Systems Applications (ICASA)
Process Crop Models: General-Purpose Atmospheric Plant Soil Simulator (GAPS 3.1)
Process Crop Models: Erosion Productivity Impact Calculator (EPIC)
Irrigation Model: CROPWAT
Irrigation Model: AquaCrop
Process Crop Models: Alfalfa 1.4
Process Crop Models: AFRC-Wheat
Process Crop Models: RICEMOD
Process Crop Models: GOSSYM/COMAX
Process Crop Models: GLYCIM
Economic Models: Econometric (Ricardian-based) Models
Economic Models: Input-Output Modeling (with IMPLAN)
4.2 Water Sector Tools
WaterWare
Water Evaluation and Planning System (WEAP)
RiverWare
Interactive River and Aquifer Simulation (IRAS)
Aquarius
RIBASIM
MIKE BASIN
Spatial Tools for River Basins and Environment and Analysis of Management Options (STREAM)
CALVIN (CALifornia Value Integrated Network)
OSWRM (Okanagan Sustainable Water Resources Model)
European Flood Alert System (EFAS)
4.3 Coastal Resources Tools
Inter-governmental Panel on Climate Change (IPCC) Common Methodology (CM)
UNEP Handbook Methodology
Bruun Rule
SURVAS
DIVA and DINAS-COAST
Page 1-10
CoastClim of Simulator of Climate Change Risks and Adaptation Initiatives (SimClim)

Community Vulnerability Assessment Tool (CVAT)
Decision Support Models: COSMO (Coastal Zone Simulation Model)
The South Pacific Island Methodology (SPIM)
Shoreline Management Planning (SMP)
RamCo and ISLAND MODEL
ReefResilience Toolkit
Smartline
4.4 Human Health Sector Tools
MIASMA (Modeling Framework for the Health Impact Assessment of Man-Induced Atmospheric
Changes)
Environmental Burden of Disease Assessment
CIMSiM and DENSiM (Dengue Simulation Model)
UNFCCC Guidelines: Methods of Assessing Human Health Vulnerability and Public Health
Adaptation to Climate Change
LymSiM
Mapping Malaria Risk in Africa (MARA) Low-end Information Tool (LITe)
4.5 Terrestrial Vegetation Sector Tools
LPJ (Lund-Postdam-Jena Model)
IBIS (Integrated BIosphere Simulator)
Medrush Vegetation Model
CENTURY
MC1
IMAGE (Integrated Model to Assess the Greenhouse Effect)
AEZ (Agro-ecological Zones) Methodology
CASA (Carnegie-Ames-Stanford Approach) Model
TEM (Terrestrial Ecosystem Model)
Page 1-11
1.3 Definitions
Methodology /ay /approach: A complete framework that prescribes an entire process for the
assessment of vulnerability and adaptation and offers a broad strategic approach. An approach in
some instances assembles certain methods and toolkits to support this process. Examples
include: IPCC Technical guidelines (1994), NAPAs guidelines (2002), Adaptation Policy
Framework (2004).
Method. A set or sequence of steps that should be followed in order to accomplish a specific
task within a larger framework. Method can be implemented through using a number of tools.
Examples include: Methods for development and use of scenario data in the vulnerability and
adaptation assessment, e.g. those presented in the UNEP Handbook (1998) and IPCC-TGCIA
Guidelines on the Use of Scenario Data for Climate Impact and Adaptation Assessment (1999).
Tool. A means or instrument by which a specific task is accomplished. Examples include:

RCMs, impact models, decision tools (cost-benefit analysis, MCA, TEAM, ADM, etc),
stakeholder tools (vulnerability indexes, Livelihood Sensitivity Exercise, etc.).
Page 1-12
References
Benioff, R., S. Guill, and J. Lee (eds.). 1996. Vulnerability and Adaptation Assessments: An
International Guidebook. Kluwer Academic Publishers, Dordrecht, The Netherlands.
Lim, B. and E. Spanger-Siegfried (eds.). 2004. Adaptation Policy Framework (APF) for Climate
Change: Developing Strategies, Policies and Measures. United Nations Development
Programme, New York. Available at http://ncsp.undp.org/report_detail.cfm?Projectid=151
Carter, T.R., M. L. Parry, H. Harasawa, and S. Nishioka (eds.). 1994. IPCC Technical
Guidelines for Assessing Climate Change Impacts and Adaptations. Department of Geography,
University College, London.
Feenstra, J., I. Burton, J. B. Smith, and R. Tol (eds.) 1998. Handbook on Methods for Climate
Change Impact Assessment and Adaptation Strategies. Institute for Environmental Studies, Free
University, Amsterdam.
Kates, R. W., J. Ausubel, and M. Berberian (eds.). 1985. Climate Impact Assessment. Studies of
the Interaction of Climate and Society. Scientific Committee on Problems of the Environment.
SCOPE Report No. 27. John Wiley and Sons, Chichester, United Kingdom.
UNITAR. 2003. Developing Human and Institutional Capacity to Address Climate Change
Issues in LDCs: Preparing for NAPAs. United Nations Institute for Training and Research.
Available at http://www.unitar.org/ccp/LDCreport.pdf.
Page 1-13
2. Complete Frameworks and
Supporting Toolkits
The complete frameworks and associated toolkits described in this chapter of the compendium,
listed in Table 2.1, span a broad range of approaches. The IPCC Technical Guidelines, the UNEP
Handbook, and the U.S. Country Studies Program represent examples of first generation
approaches to the assessment of vulnerability and adaptation. They have an analytical thrust, and
focus on an approach that emphasizes the identification and quantification of impacts. The APF
is a second-generation assessment and places the assessment of vulnerability at the center of the
process. The AIACC approach (technically a collection of projects rather than an explicit
framework) incorporates elements of both first generation and second-generation assessments.
The NAPA Guidelines provide some conceptual and procedural oversight for the process of
producing a document that identifies national priorities for adaptation. The UKCIP report
provides guidance to those engaged in decision-making and policy processes. It lays out an
approach to integrating climate adaptation decisions and more generally climate influenced
decisions into the broader context of institutional decision-making. The UKCIP framework is
distinctive in that it casts the assessment process in risk and decision under uncertainty terms.
Table 2.1. Complete frameworks and supporting toolkits

IPCC Technical Guidelines for Assessing Climate Change Impacts and
Adaptations
UNEP Handbook on Methods for Climate Change Impact Assessment
and Adaptation Strategies
Assessments of Impacts and Adaptations to Climate Change in Multiple
Regions and Sectors (AIACC)
Guidelines for the preparation of National Adaptation Programmes of
Action (NAPA)
United Kingdom Climate Impacts Programme (UKCIP) Climate
Adaptation: Risk, Uncertainty and Decision Making
Page 2-1
IPCC Technical Guidelines for Assessing Climate Change Impacts and Adaptations
Description A set of technical guidelines for the scientist that does not seek to prescribe a single preferred
method but rather a range of methods, some of which may be more suitable than others to
particular tasks, but which yield comparable results across regions and sectors. The guidelines
aid users in assessing the impacts of potential climate change and in evaluating appropriate
adaptations. The Guidelines outline a seven-step process: (1) definition of the problem,
(2) selection of the methods, (3) testing of the methods, (4) selection of the scenarios,
(5) assessment of biophysical and socioeconomic impacts, (6) assessment of autonomous
adjustments, and (7) evaluation of adaptation strategies. A range of methods is identified at
each step.
Appropriate Use To enable comparable estimates of impacts and adaptations in different sectors or regions.
Scope All regions and sectors.
Key Output Most suitable strategies for minimizing the effects of climate change.
Key Input Depends on existing data, methods that will be used, and the particular objectives of the
assessment.
Key Tools General circulation model scenarios, use of the scenario data in impacts assessment (see
Section 3.1) economic models, biophysical models, cost-benefit analysis (see Section 3.2).
Please see the UNEP manual for more information on methods used (see summary table in
Section 3.1.3). Summary of the methods used under this approach can be found in the first
(FCCC/SBI/1999/11), second (FCCC/SBI/2000/15), third (FCCC/SBI/2001/14 and Add.1),
fourth (FCCC/SBI/2002/16), and fifth (FCCC/SBI/2003/13) compilations and syntheses of
initial national communications from non-Annex I Parties at http://unfccc.int/2709.php
Ease of Use Depends on specific application.
Training Depends on user familiarity with prescribed tools. It is likely that some training is required to
Required complete the seven steps, particularly in using advanced quantitative models and in linking
model inputs and outputs.
Training No formal training currently offered though IPCC, though training may be available for
Available particular tools the guidelines prescribe, directly from their source. See also training module of
the UNITAR Climate Change Programme at http://www.unitar.org/ccp/.
Computer No explicit requirements for employing framework, though use of associated tools will require
Requirements software and in some cases significant computing resources.
Documentation Carter, T.R., M.L. Parry, H. Harasawa, and S. Nishioka. 1994. IPCC Technical Guidelines for
Assessing Climate Change Impacts and Adaptations. London: Department of Geography,
University College London. Also, Parry, M. and T. Carter. 1998. Climate Impact and
Adaptation Assessment: A Guide to the IPCC Approach. London: Earthscan.
Guidelines are available at http://www-cger.nies.go.jp/ or http://www-cger.nies.go.jp/cger-
e/e_report/r_index-e.html, or can be obtained from Department of Geography, University College
London, 26 Bedford Way, London, WC1H 0AP, United Kingdom.
Page 2-2
IPCC Technical Guidelines for Assessing Climate Change Impacts and Adaptations (cont.)
Applications U.S. Country Studies (see summary that follows), UNEP Country Studies (Contact Ravi
Sharma, ravi.Sharma@unep.org), UNDP National Communications Support Programme
(project documents at http://www.gefonline.org/), and the UNFCCCC compilations of the INCs
at http://unfccc.int/2709.php.
Contacts for Tim Carter; e-mail: tim.carter@vyh.fi.

Framework,
Documentation,
Technical
Assistance
Cost No cost for obtaining documentation of framework. Actual cost of conducting such an
assessment can vary widely. A detailed study can cost more than several hundred thousand US
dollars, although useful results can be obtained from small-scale studies costing US$50,000-
100,000.
References Benioff, R., S. Guill, and J. Lee (eds.). 1996. Vulnerability and Adaptation Assessments: An
International Guidebook. Dordrecht, The Netherlands: Kluwer Academic Publishers.
Erda, L., W.C. Bolhofer, S. Huq, S. Lenhart, S.K. Mukherjee, J.B. Smith, and J. Wisniewski
(eds.) 1996. Climate Change Vulnerability and Adaptation in Asia and the Pacific. Dordrecht,
The Netherlands: Kluwer Academic Publishers.
Page 2-3
Description The aim of the USCSP (no longer in existence) was to assist developing countries and
countries with economies in transition in meeting their obligations under the UNFCCC.
Countries participating in the USCSP focused on assessing the vulnerability of their climate
sensitive sectors and resources and, to a lesser extent, opportunities for adaptation. The
general approach prescribed by the program involved six steps: (1) define scope of assessment
process, (2) select scenarios, (3) conduct biophysical and economic impact assessments,
(4) integrate impact results, (5) analyze adaptation policies and programs, and (6) document
and present results to decision makers. At the center of this process is the evaluation of
biophysical effects.
Appropriate Use Best employed when an analysis of biophysical impacts of climate change (e.g., change in
rainfall or crop yields) is the central goal. Relatively simple methods can still be applied when
date quality and availability are limited.
Scope All regions, coastal resources, agriculture, grasslands/livestock, water resources, forestry,
human health, fisheries, and wildlife.
Key Output Climate change impacts and, to limited extent, adaptation options.
Key Input Climate change and baseline socioeconomic scenarios.
Key Tools Climate change scenarios (e.g., GCM scenarios), socioeconomic baselines (e.g., IS92a-f), and
biophysical impact models (e.g., CLIRUN, Holdridge Life Zone Classification model,
CERES-Maize; see appropriate sectoral summary tools in Chapter 4).
Training Required Training is required in the use of certain models.
Training Available Contact Stratus Consulting, P.O. Box 4059, Boulder CO 80302. Tel: +1.303.381.8000;
e-mail: jsmith@stratusconsulting.com.
Computer Depends on particular models and sectors examined.
Requirements
Documentation Benioff, T., Guill, S., and Lee, J. (eds.). 1996. Vulnerability and Adaptation Assessments: An
International Guidebook, Dordrecht, The Netherlands: Kluwer Academic Publishers.
Applications 49 countries participated, investigating impacts in one or more of eight sectors: coastal
resources, agriculture, grasslands/livestock, water resources, forests, fisheries, wildlife, and
health.
Contacts for Joel Smith, Stratus Consulting Inc., P.O. Box 4059, Boulder, CO 80302, USA;
Framework, Tel: +1.303.381.8000; e-mail: jsmith@stratusconsulting.com.
Documentation,
Technical
Assistance
Cost Depends on breadth of assessment.
Page 2-4
U.S. Country Studies Program (USCSP) (cont.)
References USCSP. 1999. Climate Change: Mitigation, Vulnerability, and Adaptation in Developing
Countries, U.S. Country Studies Program, Washington, DC
Smith, J.B., N. Bhatti, G. Menzhulin, R. Benioff, M. Campos, B. Jallow, and F. Rijsberman.
1996. Adaptation to Climate Change: Assessments and Issues, Springer-Verlag, New York;
Benioff, R., S. Guill, and J. Lee (eds.). 1996. Vulnerability and Adaptation Assessments: An
International Guidebook. Dordrecht, The Netherlands: Kluwer Academic Publishers; Smith, J.B.,
Huq, S., Lenhart, S., Mata, L.J., Nemesova, I., Toure, S. 1996. Vulnerability and Adaptation to
Climate Change. Interim Results from the U.S. Country Studies Program. Kluwer Academic
Publishers; Dixon, R.K. 1997. “Forward.” Climatic Change 36:1-2; Smith, J.B. and J.K. Lazo.
2001. “A Summary of Climate Change Impact Assessments from the U.S. Country Studies
Program.” Climatic Change 50:1-29.
Page 2-5
Description The APF provides guidance on designing and implementing projects that reduce vulnerability
to climate change, by both reducing potential negative impacts and enhancing any beneficial
consequences of a changing climate. It seeks to integrate national policy making efforts with a
“bottom-up” movement. The framework emphasizes five major principles: adaptation policy
and measures are assessed in a developmental context; adaptation to short-term climate
variability and extreme events are explicitly included as a step toward reducing vulnerability
to long-term change; adaptation occurs at different levels in society, including the local level;
the adaptation strategy and the process by which it is implemented are equally important; and
building adaptive capacity to cope with current climate is one way of preparing society to
better cope with future climate. The APF is a flexible approach in which the following five
steps may be used in different combinations according to the amount of available information
and the point of entry to the project: (1) defining project scope and design, (2) assessing
vulnerability under current climate, (3) characterizing future climate related risks, (4)
developing an adaptation strategy, and (5) continuing the adaptation process. The framework
focuses on the involvement of stakeholders at all stages.
Appropriate Use The APF is particularly applicable where the integration of adaptation measures into broader
sector specific policies, economic development, poverty reduction objectives, or other policy
domains is desirable.
Scope All sectors, all regions, particularly developing countries.
Key Output Increased adaptive capacity through prioritized adaptation strategies that can be incorporated
into development plans.
Key Input Depends on the particular application and available information. Stakeholder derived
information is a key input at all stages.
Key Tools Vulnerability mapping, dynamic simulation of sustainable livelihoods, multistakeholder
analysis (see Section 3.3), cost-effectiveness, decision trees, multicriteria analysis (see Section
3.2), among others.
Training Required Depends on nature of particular application.
Training Available A User’s Guidebook is available on the APF web page (see below). Training will be developed
(see UNDP web page).
Computer In most cases personal computer is sufficient. Depends on tools employed, however.
Requirements
Documentation A User’s Guidebook for APF and the technical papers that elaborate the APF can be obtained
online at http://ncsp.undp.org/report_detail.cfm?Projectid=151.
Applications Kenya, Honduras, Central America (see APF web page, above).
Contacts for Bo Lim, Chief Technical Advisor, Capacity Development and Adaptation Cluster, UNDP,
Framework, New York; Fax: 1.212.906.6998; e-mail: bo.lim@undp.org. Technical assistance on
Documentation, individual steps can be obtained from lead authors of the appropriate technical papers.
Technical
Assistance
Cost Depends on particular application.
Page 2-6
UNDP Adaptation Policy Framework (APF) (cont.)
References Burton, I., S. Huq, B. Lim, O. Pilifosova and E.L. Schipper 2002. From Impacts Assessment to
Adaptation Priorities: the Shaping of Adaptation Policy. Climate Policy, Amsterdam, Vol.2, 145-
159.
Lim, B and E. Spanger-Siegfried (eds.). 2004. Adaptation Policy Frameworks for Climate
Change: Developing Strategies, Policies and Measures. New York: United Nations
Development Programme.
Also see individual technical papers available on website for references.
Page 2-7
Assessments of Impacts and Adaptations to Climate Change in Multiple Regions and
Sectors (AIACC)
Description AIACC is a global initiative to advance scientific understanding of climate change
vulnerabilities and adaptation options in developing countries. AIACC aims to fill gaps in the
current understanding of vulnerability and opportunities for adaptation by funding, training,
and mentoring developing country scientists to undertake multisector, multicountry research
of priority to developing countries. AIACC takes an approach to assessment that is research
driven and focused on building capacity. While it does not prescribe an explicit framework for
undertaking vulnerability and adaptation assessments it does offer a toolkit for researchers that
are useful in the design of projects, as well as the tenets of a general approach. The toolkit also
gives also information and links on climate models, agriculture models, water resources,
ecosystems models. The AIACC regional studies are diverse in their objectives, scientific
methods, and the sectors and systems to be investigated, but they share a common second
generation assessment approach that places understanding vulnerability at the center of the
assessment, engages stakeholders in the assessment process, and gives priority to
strengthening the information base for making decisions about adaptation to climate change.
Appropriate Use The 24 AIACC studies (funded to date) are best used as a source of lessons concerning the
process or elements of the process of assessing vulnerability and adaptation options in
particular sectors and regions. The AIACC web page can also be consulted for a listing of
tools and methods that might be of use in designing such an assessment.
Scope All sectors, all regions.
Key Output Adaptation options to reduce vulnerability and risk.
Key Input Stakeholder generated information about exposure, vulnerabilities, changes, risks, and driving
forces.
Key Tools Stakeholder analysis, sustainable livelihoods and indicators (see Section 3.3b), decision
support systems, multicriteria analysis (see Section 3.2), cost-benefit analysis, among others
(see http://sedac.ciesin.columbia.edu/aiacc/toolkit.html).
Training Required Depends on design of particular assessment and tools employed.
Training Available A formal series of workshops (on scenarios and on V&A) has been held for the benefit of
project participants with several meetings scheduled for the near future
(http://www.aiaccproject.org/meetings/meetings.html). Proceedings of past meetings can
provide a useful source of information about AIACC projects and approaches. Mentoring and
networking also comprise important components of the process. Regional networks will have
the capacity to support continuing investigations and can be an important source of technical
support (http://sedac.ciesin.columbia.edu/aiacc/resources/network2.jsp and
http://sedac.ciesin.columbia.edu/aiacc/synthesis.html). There are also a newsletter and “AIACC
Working Papers” to present information on the different project. The AIACC Technical
Committee provides guidance on project design, assessment methods, scenario development,
and use and training to AIACC projects.
Computer Depends on design of particular assessment and tools employed.
Requirements
Documentation http://www.aiaccproject.org/.
Page 2-8
Assessments of Impacts and Adaptations to Climate Change in Multiple Regions and
Sectors (AIACC) (cont.)
Applications Applications across a wide range of regions, countries, sectors, systems, and groups. There is
a web-based information network to share information from the AIACC regional assessments
(http://sedac.ciesin.columbia.edu/aiacc/, and a synthesis of AIACC projects
(http://sedac.ciesin.columbia.edu/aiacc/synthesis.html). See also
http://www.aiaccproject.org/aiacc_studies/aiacc_studies.html.
Contacts for The project is managed by the AIACC Science Director and Project Coordinator and overseen
Framework, by the AIACC Implementing Committee. The AIACC Technical Committee, including a
Documentation, Scenarios Advisory Group, provides guidance on project design, assessment methods,
Technical scenario development and use, training, and selection of projects.
Assistance Sara Beresford, AIACC Project Coordinator; Tel: 202.462.2213; e-mail: sberesford@agu.org ,
Neil Leary, Science Director of AIACC; e-mail: nleary@agu.org, or general inquiries to
aiacc@agu.org.
Cost Depends on design of particular assessment.
References A listing of AIACC reports and publications can be accessed at:
http://www.aiaccproject.org/publications_reports/Pub_Reports.html.
Page 2-9
Description NAPA is a programme for least developed countries (LDCs) to address their current and urgent
adaptation needs. Countries are required to rank adaptation measures for funding by the LDC
Fund and other sources based on such criteria as urgency and cost-effectiveness. The NAPA
Guidelines are not in themselves a detailed framework for the assessment of vulnerability and
adaptation. Instead, they provide some guidance for the process of compiling a document that
specifies priority adaptation actions in the LDCs. The Guidelines outline some “guiding
elements” that inform this process and sketch out a process; however, they fall short of
providing a structured framework. The guiding elements imply that the NAPA process should
emphasize: (1) a participatory approach involving stakeholders, (2) a multidisciplinary
approach, (3) a complementary approach that builds on existing plans and programs, (4)
sustainable development, (5) gender equity, (6) a country driven approach, (7) sound
environmental management, (8) cost-effectiveness, (9) simplicity, and (10) flexibility based on
country specific circumstances. In the NAPA process, much of the work of assessing
vulnerability and adaptation is intended to be drawn from existing sources. The Guidelines do
stress the importance of conducting a participatory assessment of vulnerability to current
climate variability and extreme events as a starting point for assessing increased risk due to
climate change.
Appropriate Use Relatively rapid prioritization of adaptation options.
Key Output A document describing priorities for adaptation action, emphasizing especially how these
priorities and associated plans for action fit in with a country’s development needs, other plans,
and multilateral environmental agreements.
Key Input Results from existing and ongoing assessment of vulnerability and adaptation to both current
climate variability and climate change.
Key Tools Cost-effectiveness analysis, cost benefit analysis, multicriteria analysis, stakeholder methods
(see Sections 3.5 and 3.6).
Ease of Use Relatively straightforward, given reliance on existing studies. Ranking of adaptations may be
challenging.
Training Required Some instruction in the NAPA process is helpful.
Training Available Regional workshops devoted to increasing understanding of the NAPA process are organized by
UNITAR. Materials from these workshops are available at
http://www.unitar.org/ccp/napaworkshops.htm, http://www.napa-pana.org
Computer None.
Requirements
Documentation Annotated guidelines at
http://unfccc.int/files/cooperation_and_support/ldc/application/pdf/annguide.pdf
Special website for LDCs at http://unfccc.int/2666.php
Applications Ongoing UNDP, UNEP and World Bank projects to develop NAPAs in the 48 LDC Parties to
the UNFCCC. Submitted NAPAs are available at http://unfccc.int/2679.php
Page 2-10
(cont.)
Contacts for General information: Paul Desanker, UNFCCC secretariat; Tel: +49.228.815.1362; e-mail:
Framework, Pdesanker@unfccc.int .
Documentation, For technical guidance and advice on the preparation and on the implementation strategy of
Technical NAPAs, including the identification of possible sources of data and its subsequent application
Assistance and interpretation, contact the LDC Expert Group (LEG) at http://unfccc.int/2666.php.
Cost No cost for obtaining Guidelines.
References United Nations Institute for Training and Research. 2003. Developing Human and Institutional
Capacity to Address Climate Change Issues in LDCs: Preparing for NAPAs. Available at
http://www.unitar.org/ccp/LDCreport.pdf.
Page 2-11
United Kingdom Climate Impacts Programme (UKCIP) Climate Adaptation: Risk,
Uncertainty and Decision Making
Description The report proposes a step-wise approach to vulnerability and adaptation assessment in a risk
uncertainty decision-making framework. The framework and guidance aim to help decision-
makers and their advisors in identifying important risk factors and to describe the uncertainty
associated with each. It aims to help them judge the significance of the climate change risk
compared to the other risks they face, so they can work out what adaptation measures are most
appropriate. There are questions for the decision maker to apply at each stage, and tools that
can be used. The report identifies methods and techniques for risk assessment and forecasting,
options appraisal and decision analysis. There are eight stages in the framework: (1) identify
problem and objectives, (2) establish decision making criteria, (3) assess risk, (4) identify
options, (5) appraise options, (6) make decision, (7) implement decision, and (8) monitor,
evaluate, and review. It prescribes a circular process in which feedback and iteration are
encouraged, and emphasizes a sequential implementation of adaptation measures.
Appropriate Use The UKCIP framework is applicable to any decision that is likely to be influenced by climate
or made in specific response to climate, barring those related to mitigation. Diverse
applications are possible. The methodology is particularly relevant to decision makers (1) who
are responsible for areas or sectors that are sensitive to climate change, (2) who are
responsible for managing the consequences of present day variability in weather or climate,
(3) whose decisions could be vulnerable to assumptions about the risks associated with future
climate, (4) who are responsible for commissioning or overseeing technical assessments of
climate change vulnerability, impacts and associated adaptation options, or (5) who need to
address the robustness of a proposed decision to assumptions associated with the nature of the
future climate.
Scope All regions, all sectors. Written from the UK perspective but applicable internationally.
Key Output Preferred adaptation options (especially no regret and low regret options) based on evaluation
criteria and information regarding optimal timing and extent of implementation. Feedback
based on monitoring, evaluation, and review from the implementation of these options is an
important output, and becomes a key input in the iterative process.
Key Input Decision-makers’ objectives, benchmark levels of climate risk, multiple climate and non-
climate scenarios and feedback from already implemented adaptations.
Training Depends on user familiarity with prescribed tools. It is likely that some training is required to
Required complete the eight steps.
Training No formal training currently offered, but UKCIP Technical Report provides fairly detailed
Available instruction.
Computer No explicit requirements for employing framework, though use of some associated tools will
Requirements require software (see Appendix 4 of UKCIP Technical Report).
Documentation Willows, R.I. and R.K. Connell. (eds.). 2003. Climate Adaptation: Risk, Uncertainty and
Decision-Making. UKCIP Technical Report. UKCIP, Oxford.
Page 2-12
United Kingdom Climate Impacts Programme (UKCIP) Climate Adaptation: Risk,
Uncertainty and Decision Making (cont.)
Applications (1) Scoping study for the Isle of Man (http://www.gov.im/dlge/enviro/climatechange.xml. The
study used the Risk, Uncertainty and decision-making framework to investigate projected
impacts of climate change impacts across key sectors for the Island. (2) Climate proofing rural
resource protection policies and strategies in Wales (http://publications.environment-
agency.gov.uk/epages/eapublications.storefront - this is a link to the Environment Agency's
publications catalogue).The study used the framework to investigate how robust rural resource
protection policies and strategies are in the face of a changing climate. (3) Defra (Global
Atmospheres Division) Climate change impacts and adaptation: Cross-regional research
programme. Topic C: Water (http://www.futuredrought.org.uk/Defra_Home.htm). Study with
the aim of aim of developing practical guidance on how to manage water resources in a
changing climate.
Contacts for enquiries@ukcip.org.uk
Tools,
Documentation,
Technical
Assistance
Cost Technical report is available free of charge from the UKCIP website
(http://www.ukcip.org.uk).
References As above (applications) and: Branch project
(http://www.branchproject.org/documents/FinalReport/Annex1.pdf), ESPACE decision
testing tool (http://www.espace-project.org/part1/publications/pdf23.pdf), City of London
Adaptation strategy (http://213.86.34.248/NR/rdonlyres/7347D392-3CF3-4344-8B2D-
9AF9315E8801/0/SUS_climateadapt.pdf).
Page 2-13
3. Cross-Cutting Issues and
Multisector Approaches
The tools described in this part of the compendium encompass a broad range of applications.
Some groups of tools address important cross-cutting themes such as use of climate or
socioeconomic scenario data. Others such as decision analysis provide more detail on tools that
might be most applicable to a particular step of the vulnerability and adaptation assessment
process. Others still, such as stakeholder analysis, encompass not only a set of tools but also, in
some instances, a partial framework that prescribes a process or an approach to undertaking
several steps of a complete assessment.
3.1 Development and Application of Scenarios

The documents and techniques described in this section of the compendium (see Table 3.1)
address the development and use of scenario data in the vulnerability and adaptation assessment
process. The IPCC guidelines address this application generally, discussing a wide range of
issues related to the application of both climate scenarios and socioeconomic scenarios. Several
tools are descried that provide access to data and guidance to support the development and
application of scenarios. The techniques that follow are more specific methods that can be used
for downscaling climate data or developing socioeconomic scenarios.
The downscaling techniques described here can be used to produce small-scale climate data of
the type often required by impact models and to develop future climate scenarios at local and
national scales. Downscaling techniques represent only one particular way of generating climate
change scenarios. Some of the techniques detailed here require considerable expertise and
experience (e.g., dynamical downscaling), while others are relatively straightforward and easy to
use (e.g., MAGICC/SCENGEN, SDSM, and weather generators).
The approaches to socioeconomic scenario construction, also listed in Table 3.1, are mostly part
of larger frameworks, with the exception of the UKCIP scenarios. While users might consider
employing an approach that is derived from a framework similar to that which they are
implementing, the approaches described can be used independently of their parent frameworks.
In practice, the process of developing scenarios will depend on the nature of the planned
assessment. None of the following approaches provides a “one size fits all” method for
developing socioeconomic futures, but should instead be viewed as informing a necessarily ad
hoc process.
Page 3-1
Table 3.1 Development and application of scenarios
3.1.1 General tools
IPCC-TGCIA Guidelines on the Use of Scenario Data for Climate
Impact and Adaptation Assessment
RClimDex
SimCLIM
Climate Information and Prediction Services (CLIPS) Project and
Regional Climate Outlook Forums (RCOFs)
3.1.2 Climate downscaling techniques
MAGICC/SCENGEN
Weather Generators
COSMIC2 (COuntry Specific Model for Intertemporal Climate Vers.
2)
3.1.3. Socioeconomic scenarios
Developing Socioeconomic Scenarios: For Use in Vulnerability and
Adaptation Assessments
Qualitative and Quantitative Scenarios Emphasizing Stakeholder
Input
Page 3-2
3.1.1 General tools
Assessment
Description The Intergovernmental Panel on Climate Change (IPCC) Data Distribution Centre (DDC)
www.ipcc-data.org provides access to data sets, climate and other scenarios, and other
materials (e.g., technical guidelines on use of scenarios). The DDC operates under the
oversight of the Task Group on Data and Scenario Support for Impact and Climate Assessment
(TGICA), which was established by the IPCC to facilitate wide availability of climate change-
related data and scenarios to enable research and sharing of information across the three IPCC
working groups. There are four technical guideline documents: (1) General Guidelines on the
use of Scenario Data for Climate Impact and Adaptation Assessment (2007); (2) Guidelines
for Use of Climate Scenarios Developed from Regional Climate Model Experiments; (3)
Guidelines for Use of Climate Scenarios Developed from Statistical Downscaling Methods;
(4) Future climate in world regions: an intercomparison of model-based projections for the
new IPCC emissions scenarios (Regional Scatter Diagrams). There is also a visualisation tool,
providing maps of observed and projected climate variables and a help desk.
Appropriate Use Scenario data should be applied as part of a greater methodological framework for climate
change vulnerability and adaptation assessment (see Chapter 2).
Scope All regions and sectors. IPCC approved data and technical guidelines on its use
Key Output The data available from the DDC should be used in conjunction with the technical guidelines.
Primarily designed to serve the impacts, adaptation and vulnerability research community.
Also of potential interest to policy makers, planners and the general public. The DDC provides
technical guidelines and three types of data: observed global climate data sets, nonclimatic
(other environmental, socio-economic and emissions) baseline and scenario information, and
results from global climate model experiments.
Key Input Queries and user feedback.
Key Tools Data visualisation, data archive, technical guidelines on use of data.
Ease of Use Depends on techniques employed.
Training Required Depends on guidelines employed.
Training Available No formal training offered.
Computer Browser for data access. Additional software may be required to process some of the data.
Requirements Details are provided on the DDC site www.ipcc-data.org.
Documentation Available at http://www.ipcc-data.org/guidelines/TGICA_guidance_sdciaa_v2_final.pdf
Applications Not applicable.
Page 3-3
Assessment (cont.)
Contacts for Guidelines:
Framework, Tim Carter, Finish Environment Institute; Tel: +358.9.40300.315;
Documentation, e-mail: tim.carter@vyh.fi.
Technical Data:
Assistance IPCC Document Distribution Center, e-mail: ipcc.ddc@uea.ac.uk; website: http://ipcc-
ddc.cru.uea.ac.uk.
or
Dr. Michael Lautenschlager, IPCC DDC Manager; Tel: +49.404.1173.297;
e-mail: lautenschlager@dkrz.de.
Cost Guidelines and data are provided free of charge.
References IPCC-TGICA, 2007: General Guidelines on the Use of Scenario Data for Climate Impact and
Adaptation Assessment. Version 2. Prepared by T.R. Carter on behalf of the Intergovernmental
Panel on Climate Change, Task Group on Data and Scenario Support for Impact and Climate
Assessment, 66 pp.
Page 3-4
Description The Climate Impacts LINK dataset at the BADC (http://badc.nerc.ac.uk/data/link/) contains
output data from a large number of numerical climate models and experiments from the
Hadley Centre (at the UK Met office). The data are mainly from the global HadCM3 and
regional HadRM3 models, and these data are available for use by the climate impact research
community. The BADC website contains additional documentation on the format of the data,
output variables and structure of the archive. The data themselves are available via ftp and
http. The Climate Impacts LINK Project is funded by the UK Department of the Environment,
Food and Rural Affairs (DEFRA).
Appropriate Use While the data are available to researchers, it is recommended that expert advice on the most
appropriate model output to use be sought. For LINK data, this advice should come from the
UK Met Office scientists who produced the data.
Scope The model outputs have global and regional coverage, and are available as daily and monthly
mean fields. Typically, the data contain various output atmospheric fields, though in some
cases ocean variables are also available.
Key Output The ouput model data are widely used for a number of climate change studies.
Key Input Some understanding of the background to the model experiments, so that the most appropriate
data can be used for a particular study.
Ease of Use As above.
Training Required As above.
Training Available None.
Computer None.
Requirements
Documentation See the BADC LINK webpage (http://badc.nerc.ac.uk/data/link/) for more information and
web links.
Applications Numerous climate change studies.
Contacts for Tools, BADC helpdesk: badc@rl.ac.uk
Documentation,
Technical The British Atmospheric Data Centre, Space Science and Technology Department
Assistance R25 - Room 2.122, CCLRC Rutherford Appleton Laboratory, Chilton, nr Didcot, Oxfordshire,
OX11 0QX, England, UK; Tel: +44.1235.44. 64.32; Fax: +44.1235.44.63.14.
UK Met Office: http://www.metoffice.gov.uk/

Cost No charge is made for academic use of these data. Commercial users should contact the UK
Met Office for more information.
References None.
Page 3-5
Description The Global Ocean Data Assimilation System (GODAS) is developed at the National Centers
for Environmental Prediction (NCEP) using the Geophysical Fluid Dynamics Laboratory’s
Modular Ocean Model version 3 (MOM.v3) and a three-dimensional variational data
assimilation scheme. A retrospective global ocean reanalysis for 1979-2004 has been
generated, and is used to initialize the oceanic component of the NCEP Climate Forecast
System (CFS). The historical data set and real time update of the ocean analysis provide a
valuable data set for use in research and operational communities.
Appropriate Use GODAS can be used to study the mean climate, as well as the sub-seasonal, seasonal and
interannual variability of the ocean.
Scope GODAS provides ocean temperature, salinity and velocity for the domain 75OS to 65ON.
Key Output The GODAS web site contains data links, data validations and global oceanic monitoring
products (http://www.cpc.ncep.noaa.gov/products/GODAS/).
Key Input None.
Ease of Use Users can extract the data using a Fortran program or download the plots from the GODAS
web site.
Training Required None.
Computer Web browser and a desktop with Unix system.
Requirements
Documentation Documentation is provided on the GODAS web site.
Applications Global oceanic monitoring products shown on the GODAS web site.
Contacts for Tools, Dr. Yan Xue, Climate Prediction Center, NCEP; e-mail: Yan.Xue@noaa.gov.
Documentation,
Technical
Assistance
Cost None.
References Behringer, D.W. and Y. Xue. 2004. Evaluation of the global ocean data assimilation system at
NCEP: The Pacific Ocean. Eighth Symposium on Integrated Observing and Assimilation
Systems for Atmosphere, Oceans, and Land Surface, AMS 84th Annual Meeting, Washington
State Convention and Trade Center, Seattle, Washington.
Behringer, D.W. 2007. The Global Ocean Data Assimilation System (GODAS) at NCEP. 11th
Symposium on Integrated Observing and Assimilation Systems for the Atmosphere, Oceans,
and Land Surface, AMS 87th Annual Meeting, San Antonia, TX.
Page 3-6
RClimDex
Description RClimDex is software that computes a total of 27 climate extreme indices recommended by
the WMO CCl/CLIVAR/JCOMM joint Expert Team on Climate Change Detection and Indices
(ETCCDI). These indices have been used to evaluate past changes in climate extremes.
RClimDex runs in R, free software that provides an environment for statistical analysis.
Appropriate Use RClimDex is used to generate indices for climate extremes from daily station data.
Scope RClimDex was designed to analyze daily station data for all parts of the world. By applying
the same tool in different parts of the world and generating the same types of indices, analyses
conducted in different parts of the world can be compared, and merged together to seamlessly
form a spatial map across the world.
Key Output The final output is a set of indices for climate extremes.
Key Input This tool requires daily values of station precipitation amount, and maximum and minimum
temperatures.
Ease of Use The software has a friendly graphical user interface. Programming skill is not required.
Anyone who is able to use a computer should be able to run the software.
Training Required Training is generally not required to run the software. However, the interpretation and future
analysis of the indices requires some knowledge of climatic analysis.
Training Available Training has been provided through ETCCDI organized workshops.
Computer The software runs in MS-Windows, Linux and Unix. The statistical environment R needs to
Requirements be installed before running the RClimDex. There is no special hardware requirement; a typical
office PC, or any workstation should be sufficient.
Documentation A user manual, in both English and Spanish, is available at http://cccma.seos.uvic.ca/etccdi.
Applications This software has been used in ETCCDI workshops (see references below).
Contacts for Tools, RClimDex was developed by Xuebin Zhang and Yang Feng of Environment Canada on behalf
Documentation, of the ETCCDI. For details and technical assistance contact Dr. Xuebin Zhang, Climate
Technical Research Division, Environment Canada, 4905 Dufferin Street, Toronto, Ontario, Canada,
Assistance M3H 5T4; Tel: +1.416.739.4713; Fax: +1. 416.739.5700; e-mail: Xuebin.Zhang@ec.gc.ca.
Cost RClimDex and the R environment are free. RClimDex is available at
http://cccma.seos.uvic.ca/etccdi, and R is available at http://www.r-project.org.
Page 3-7
RClimDex (cont.)
References Aguilar, E., T.C. Peterson, P. Ramírez Obando, R. Frutos, J.A. Retana, M. Solera, I. González
Santos , R.M. Araujo, A. Rosa Santos, V.E. Valle, M. Brunet India, L. Aguilar, L. Álvarez, M.
Bautista, C. Castañón , L. Herrera, R. Ruano, J.J. Siani, F. Obed, G.I. Hernández Oviedo, J.E.
Salgado, J.L. Vásquez, M. Baca, M. Gutiérrez, C. Centella, J. Espinosa, D. Martínez, B.
Olmedo, C.E. Ojeda Espinoza, M. Haylock, R. Núnez, H. Benavides and R. Mayorga. 2005.
Changes in precipitation and temperature extremes in Central America and Northern South
America, 1961-2003. Journal of Geophysical Research – Atmospheres 110: D233107,
doi:10.1029/2005JD006119.
Alexander, L.V., X. Zhang, T.C. Peterson, J. Caesar, B. Gleason, A.M.G. Klein Tank, M.
Haylock, D. Collins, B. Trewin, F. Rahimzadeh, A. Tagipour, K. Rupa Kumar, J. Revadekar,
G. Griffiths, L. Vincent, D.B Stephenson, J. Burn, E. Aguilar, M. Brunet, M. Taylor, M. New,
P. Zhai, M. Rusticucci and J.L. Vazquez-Aguirre. 2006. Global observed changes in daily
climate extremes of temperature and precipitation. Journal of Geophysical Research –
Atmospheres 111: DO5109,
Klein Tank, A.M.G., T.C. Peterson, D.A. Quadir, S. Dorji, Z. Xukai, T. Hongyu, K. Santhosh,
U.R. Joshi, A.K. Jaswal, R.K Kolli, A. Sikder, N.R. Deshpande, J. Revadekar, K. Yeleuova, S.
Vandasheva, M. Faleyeva, P. Gomboluudev, K.P. Budhathoki, A. Hussain, M. Afzaal, L.
Chandrapala, H. Anvar, P.D. Jones, M.G. New and T. Spektorman. 2005. Changes in daily
temperature and precipitation extremes in Central and South Asia, Journal of Geophysical
Research – Atmosphere 111: doi:10.1029/2005JD006316.
New, M., B. Hewitson, D.B. Stephenson, A. Tsiga, A. Kruer, A. Manhique, B. Gomez, C.A.S.
Coelho, D.N. Masisi, E. Kululanga, E. Mbambalala, F. Adesina, H. Saleh, J. Kanyanga, J.
Adosi, L. Bulane, L. Fortunata, M.L. Mdoka and R. Lajoie. 2006: Evidence of trends in daily
climate extremes over southern and west Africa, Journal of Geophysical Research-
Atmospheres 111: D14102, doi:10.1029/2005JD006289.
Peterson, T.C., X. Zhang, M. Brunet India and J.L.V. Aguirre.2007. Changes in North
American extremes derived from daily weather data. Journal of Geographical Research-
Atmospheres, submitted.
Vincent, L.A., T.C. Peterson, V.R. Barros, M.B. Marino, M. Rusticucci, G. Carrasco, E.
Ramirez, L.M. Alves, T. Ambrizzi, M.A. Berlato, A.M. Grimm, J.A. Marengo, L. Molion,
D.F. Moncunill, E.Rebello, Y.M.T. Anunciação, J. Quintana, J.L. Santos, J. Baez, G. Coronel,
J. Garcia, I. Trebejo, B. Bidegain, M.R. Haylock and D. Karoly. 2005. Observed trends in
indices of daily temperature extremes in South America 1960-2000. Journal of Climate
18:5011-5023.
Zhang, X., E. Aguilar, S. Sensoy, H. Melknyan, U. Taghiyeva, N. Ahmed, N. Kutaladze, F.
Rahimzadeh, A. Taghipour, T.H. Hantosh, P. Albert, M. Semawi, M.K. Ali, M. Halal, A. Al-
Shabibi, A. Al-Oulan, A. Zatari, I. Al Dean Khalil, R. Sagir, M. Demircan, M. Eken, M.
Adiguzel, L, Alexander, T.C. Peterson and T. Wallis. 2005a. Trends in Middle East climate
extremes indices during 1930-2003. Journal of Geophysical Research – Atmospheres
110:D22104, doi:10.1029/2005JD006181.
Zhang, X. G. Hegerl, F.W. Zwiers and J. Kenyon. 2005b. Avoiding inhomogeneity in
percentile-based indices of temperature extremes, Journal of Climate 18:1641– 1651.
Page 3-8
SimCLIM
Description SimCLIM is a flexible software package that links data and models in order to simulate the
impacts of climatic variations and change, including extreme climatic events, on sectors such
as agriculture, health, coasts or water resources. SimCLIM is a user-friendly “open-
framework” system that can be customized and maintained by users. It contains tools for
importing and analyzing both spatial (monthly, seasonal) and time-series (hourly, daily or
monthly) data. For generating scenarios of future climate and sea-level changes, SimCLIM
uses a “pattern scaling” method that involves the use of spatial data from complex atmosphere-
ocean general circulation models (or AOGCMs) together with projections of global-mean
climate changes. Standard tools presently include: degree-day model; domestic water tank
model; extreme event analyzer; coastal erosion model; and data browser. Specific versions of
SimCLIM are also available that interface with DHI hydrologic models and with ICASA crop
models (DSSAT).
Appropriate Use SimCLIM can be used to: describe baseline climates; examine current climate variability and
extremes; generate climate and sea-level change scenarios; assess present and future climatic
risks; assess present and future adaptation measures; conduct sensitivity analyses; examine
sectoral impacts; examine uncertainties; facilitate integrated impact assessments.
Scope SimCLIM contains a custom-built GIS and can thus be applied spatially to any geographic area
and spatial resolution, from global to local. It also contains site-specific tools for examining
time-series climate data and driving site-specific impact models.
Key Output Spatial and site-specific scenarios of climate and sea-level changes (including changes in the
risks of extreme events) and their sector impacts. Formats include spatial images, time-series
projections, and graphical and tabular output.
Key Input AOGCM and observed climate data are provided with SimCLIM for global and regional
scenario generation, as well as some daily and monthly station data. Depending on user
requirements, additional data for national and local situations can be included in the package.
Other spatial and time-series data can be imported into the system by the user.
Ease of Use Very user-friendly software. User and technical manuals are provided.
Training Required For the basic functions, little training is required for users familiar with climate science.
Training is advisable for users with limited background in climate change or for those who
wish to gain experience with the full functionality of the system.
Training Available Training sessions are held regularly depending on the demand. A training version of the model,
called TrainCLIM, is also available and has been used extensively for purposes of training in
climate change vulnerability and adaptation assessment.
Computer Personal computer.
Requirements
Documentation The users and technical manuals can be obtained from CLIMsystems Ltd by request:
info@climsystems.com
Applications Used extensively in New Zealand (where it is called CLIMPACTS), Australia and North
America, as well as in various Pacific Island Countries. A recent example was an application
for studies conducted for the Asian Development Bank, 2005:
http://www.adb.org/Documents/Reports/Climate-Proofing/
Contacts for Tools, CLIMsystems Ltd, P.O. Box 638, Waikato Mail Centre, Hamilton 3240, New Zealand; e-mail:
Documentation, info@climsystems.com; website: www.climsystems.com.
Technical
Assistance
Cost Individual and site licenses available, at low-to-medium cost depending on user category.
Page 3-9
SimCLIM (cont.)
References Warrick, R.A. and G. Cox. 2007. New developments of SimCLIM software tools for risk-
based assessments of climate change impacts and adaptation in the water resource sector. In
M. Heinonen (ed.), Proceedings of the Third International Conference on Climate and Water.
Helsinki, Finland, 3-6 September 2007. SYKE, Helsinki, p. 518-524.
Warrick, R.A. In press. From CLIMPACTS to SimCLIM: the Development of an Integrated
Model for Assessing Impacts and Adaptation to Climate Change and Variability. In C.G.
Knight and J. Jaeger (eds.), Integrated Regional Assessment: Challenges and Case Studies.
Cambridge University Press, UK.
Warrick, R.A., W. Ye, P. Kouwenhoven, J.E. Hay and C. Cheatham. 2005. New Developments
of the SimCLIM Model for Simulating Adaptation to Risks Arising from Climate Variability
and Change. In Zerger, A. and Argent, R.M. (eds.) MODSIM 2005. International Congress on
Modelling and Simulation. Modelling and Simulation Society of Australia and New Zealand,
December 2005, pp. 170-176.
Warrick, R.A. 2006. Climate Change Impacts and Adaptation in the Pacific: Recent
Breakthroughs in Concept and Practice. In Chapman, R., Boston, J. and Schwass, M. (eds.)
Confronting Climate Change: Critical Issues for New Zealand. Wellington: Victoria
University Press.
Warrick, R.A. 2007. SimCLIM: Recent Developments of an Integrated Model for Multi-
scale, Risk-based Assessments of Climate Change Impacts and Adaptation. Proceedings of the
2007 ANZSEE Conference on Re-inventing Sustainability: A Climate for Change, held 3-6
July 2007, Noosaville, Queensland, Australia,
http://www.anzsee.org/2007conference/conference_papers.asp.
Page 3-10
Description The UKCIP02 climate change scenarios provide four alternative descriptions of how the
climate of the UK might evolve over the course of this century.
Appropriate Use The UKCIP02 scenarios have become a standard reference for impacts and adaptation work in
the UK. Ways in which they have been used can be broadly divided into research,
communication and decision- and policy-making.
Scope The climate change scenarios cover only the UK (though underlying model output is also
available for the Republic of Ireland), meaning their scope is limited to UK-based climate
impacts and adaptation.
Key Output The information contained in UKCIP02 is provided to users in three main ways:
(i) Headline messages - provide a national overview of the main changes described by
UKCIP02. They also include historic trends, to allow recent observations to be
compared with future projections.
(ii) Published material - explains the science behind UKCIP02, examines historic
climate trends in the UK and gives more information about the projected future
changes. It includes a range of prepared maps & graphs to help visualise the
changes described.
(iii) Numerical information - provides the basis for the changes described by
UKCIP02, allowing further processing and analysis (e.g. as input to other
modelling software). Much has been converted to GIS-format files in order to
facilitate its use. A series of datasets of historic climate of the UK provide
information on the observed climate.
Key Input None required for headline messages and published material. Numerical information requires
users to complete a registration form. Use of UKCIP02 is most effective if users dedicate some
time to understand how the scenarios were produced, what they offer and the uncertainties
involved. Their use is enhanced through use of the other UKCIP tools.
Ease of Use No information available.
Training Required No information available.
Training Available None provided.
Computer No information available.
Requirements
Documentation UKCIP02 briefing report and science report; Scenarios Gateway web-pages
(www.ukcip.org.uk/scenarios/ukcip02).
Applications Set of case studies is being developed. Ways in which they have been used can be broadly
divided into research, communication and decision- and policy-making.
Contacts for Tools, Richard Westaway
Documentation,
Technical
Assistance
Cost No charge.
References Hulme et al. 2002. Climate Change Scenarios for the United Kingdom: The UKCIP02 Briefing
Report. 15pp.
Hulme et al. 2002. Climate Change Scenarios for the United Kingdom: The UKCIP02
Scientific Report. 120pp.
Page 3-11
Climate Information and Prediction Services (CLIPS) Project and Regional Climate
Outlook Forums (RCOFs)
Description Climate Information and Prediction Services (CLIPS) is a project of the World Meteorological
Organization (WMO) designed to assist in the provision of climate information and predictions
for improved economic and social decision making, and thereby support sustainable
development. CLIPS builds on the rapidly developing atmospheric and oceanographic research
(e.g. atmospheric predictability beyond weather prediction, ocean predictability, regional
circulation indices such as ENSO and NAO, ocean-atmosphere interactions, etc.) as well as the
wealth of climate data, experience and expertise within the National Meteorological
Hydrological Services (NMHSs) and related entities and provides a framework to deliver
operational user-targeted climate services. The CLIPS project is an effective framework within
which regional climate variability and change information and the associated adaptation issues
can be integrated. Development of training curricula, training workshops and regional
showcase projects are key components of CLIPS.
The Regional Climate Outlook Forums (RCOFs), promoted by WMO along with other
international agencies, constitute an important vehicle in developing countries for providing
advanced information on the future climate information for the next season and beyond, and
for developing a consensus product from amongst the multiple individual predictions (based on
ensembles of different dynamical climate model outputs, statistical relationships between
surface ocean and continental anomalies, validated by some human expertise) . RCOFs
stimulate the development of climate capacity in the NMHSs and facilitate end-user liaison to
generate decisions and activities that mitigate the adverse impacts of climate variability and
change and help communities to build appropriate adaptation strategies.
There is a great potential for the regional climate activities that currently take place under
RCOFs and through CLIPS training to expand, through the actions of the WMO regional
associations and the NMHSs, the use of currently available downscaling tools to more
countries and to include information on climate change scenarios assembled by the World
Climate Research Programme (WCRP), such as climate projections created for the IPCC
Fourth Assessment Report (AR4). This would enable NMHSs to contribute to their national
communications to the UNFCCC and to develop or enhance their dialogue with users of
climate information on climate risks and vulnerability (especially their governments), and
would also support improved regional coordination on climate matters, standardization of tools
and increased evaluation (feedback) on model outputs.
While there is a range of climate modeling and downscaling tools is available today, there is as
yet no global framework to train and apply these tools to meet the user needs. CLIPS/RCOFs
provide this framework and bring value to the model applications and their data and facilitate
their access to the users.
Appropriate Use It is important that appropriate partnerships with the application sectors are put in place to
understand the user needs. It is most appropriate to develop RCOFs for groups of nations
having common climate information needs. Effective networking of the representatives of
climate information providers and user sectors from the participating countries is also essential
for successful operation of RCOFs. It is important for producers of climate predictions at
seasonal to inter-annual scales to demonstrate the potential benefit that users can draw for their
application by using the forecasts. This can easily be done using hindcasts.
Page 3-12
Outlook Forums (RCOFs) (cont.)
Scope CLIPS framework is applicable at the local, national, regional and global level. RCOFs
operate at sub-continental scale.
Key Output Training workshops, CLIPS curriculum, tailored climate products, regional climate outlooks,
guidance on best practices in CLIPS operations, verification and user liaison, consensus-based
climate products (e.g., WMO El Niño/La Niña Updates and seasonal climate outlooks issued
by the RCOFs), downscaled climate prediction products for national/regional levels, etc.
Key Input National/regional/global climate data, climate prediction products from WMO Global
Producing Centres (GPCs) for long range forecasts and WMO Regional Climate Centres
(RCCs)/RCC Networks, data on climate-sensitive sectors for impact assessment.
Ease of Use Requires expertise in climate processes, analysis and modeling, and knowledge of climate-
related risk management aspects.
Training Required Training required in downscaling of climate prediction/projections to appropriate
regional/national scales, verification, and development of user liaison. Training is also
required for the generation of tailored climate products.
Training Available WMO supports limited CLIPS training through its global series of workshops. Training is also
an integral component of the RCOF process. In addition, there are other international agencies
providing training on CLIPS- and RCOF-related topics.
Computer High-performance computing facilities are required to run regional climate models. However,
Requirements for statistical downscaling and development of regional/national climate products, a personal
computer with the latest technology with relatively high processing, memory and storage
capacities will be adequate. A high-speed internet connectivity will be most essential to access
global/regional climate products.
Documentation CLIPS Brochures and related guidance documents and meeting reports.
Applications CLIPS has been promoted worldwide, and a number of CLIPS Focal Points exist in many
countries. RCOFs are active in Africa, South America, Central America, Asia and Pacific
Islands. For more information, please visit
http://www.wmo.int/pages/prog/wcp/wcasp/clips/outlooks/climate_forecasts.html.
Contacts for Tools, Chief, World Climate Applications & CLIPS Division, World Climate Programme
Documentation, Department, World Meteorological Organization,7bis, Avenue de la Paix, Case Postale No.
Technical 2300, 1211, Geneva 2, Switzerland; Tel: +41.22.730.8377; Fax: +41.22.730.8042; e-mail:
Assistance wcac@wmo.int.
Cost WMO facilitates free access to some specialized climate prediction software as well as climate
prediction/projection products, through its Members and partnering agencies. Resources will
be required to organize training sessions and RCOF operations.
Page 3-13
Outlook Forums (RCOFs) (cont.)
References CLIPS brochures and RCOF links available at WMO World Climate Applications and
Services Programme and CLIPS web pages:
http://www.wmo.int/pages/prog/wcp/wcasp/wcasp_home_en.html
Coping with the Climate: A Way Forward, A multi-stakeholder review of RCOFs. 2000.
http://iri.columbia.edu/outreach/publication/irireport/PretoriaSumRpt2.pdf.
Palmer, T.N., A. Alessandri, U. Andersen, P. Cantelaube, M. Davey, P. Délécluse, M. Déqué,
E. Díez, F.J. Doblas-Reyes, H. Feddersen, R. Graham, S. Gualdi, J.-F. Guérémy, R. Hagedorn,
M. Hoshen, N. Keenlyside, M. Latif, A. Lazar, E. Maisonnave, V. Marletto, A. P. Morse, B.
Orfila, P. Rogel, J.-M. Terres and M. C. Thomson. 2004. Development of a European multi-
model ensemble system for seasonal to inter-annual prediction (DEMETER). Bulletin of the
American Meteorological Society 85: 853-872.
http://ams.allenpress.com/amsonline/?request=get-abstract&doi=10.1175/BAMS-85-6-853
Patt, A.G. and J. Winkler. 2007. Applying Climate Information in Africa: An Assessment of
Current Knowledge. Written in support of NOAA, Boston University and the International
Institute for Applied Systems Analysis (IIASA).
http://www.iiasa.ac.at/Publications/Documents/XO-07-006.pdf .
Page 3-14
3.1.2 Climate downscaling techniques and regional models
Description Downscaling is a method for obtaining high-resolution climate or climate change information
from relatively coarse-resolution global climate models (GCMs). Typically, GCMs have a
resolution of 150-300 km by 150-300 km. Many impacts models require information at scales
of 50 km or less, so some method is needed to estimate the smaller-scale information.
Statistical downscaling first derives statistical relationships between observed small-scale
(often station level) variables and larger (GCM) scale variables, using either analogue methods
(circulation typing), regression analysis, or neural network methods. Future values of the
large-scale variables obtained from GCM projections of future climate are then used to drive
the statistical relationships and so estimate the smaller-scale details of future climate (see also
weather generators).
Appropriate Use Statistical downscaling may be used whenever impacts models require small-scale data,
provide suitable observed data are available to derive the statistical relationships.
Scope All locations.
Key Output Small scale information on future climate or climate change (maps, data, etc).
Key Input Appropriate observed data to calibrate and validate the statistical model(s). GCM data for
future climate to drive the model(s).
Ease of Use Difficult to apply from first principles since it requires access to large data sets and
considerable expertise to derive the statistical relationships. User-friendly software to facilitate
use is available (see SDSM — Statistical DownScaling Model, on next table).
Training Required Considerable knowledge and experience is required to work from first principles. Use of
packages like SDSM, however, requires relatively little training.
Training Available A training course for SDSM was held in late 2002, but there are currently no plans for future
courses.
Requirements
Documentation Numerous publications in the scientific literature. The SDSM package provides a list of the
most useful such publications arranged by category.
Applications Widely applied in many regions and over a range of climate impact sectors. For a specific
example, see Wilby et al. (1999) in References below.
Contacts for SDSM may be obtained by registering at https://co-public.lboro.ac.uk/cocwd/SDSM/.
Framework,
Documentation,
Technical
Assistance
Cost SDSM is free.
Page 3-15
Statistical Downscaling (cont.)
References Wilby, R.L. and T.M.L. Wigley. 1997. Downscaling general circulation model output: A
review of methods and limitations. Progress in Physical Geography 21:530-548.
Wilby, R.L. and T.M.L. Wigley. 2000. Downscaling general circulation model output: A
reappraisal of methods and limitations. In Climate Prediction and Agriculture, M.V.K.
Sivakumar (ed.). Proceedings of the START/WMO International Workshop, 27-29 September
1999, Geneva. International START Secretariat, Washington, DC, pp. 39-68.
Wilby, R.L., L.E. Hay, and G.H. Leavesley. 1999. A comparison of downscaled and raw GCM
output: Implications for climate change scenarios in the San Juan river basin, Colorado.
Journal of Hydrology 225:67-91.
Wilby, R.L., T.M.L. Wigley, D. Conway, P.D. Jones, B.C. Hewitson, J. Main, and D.S. Wilks.
1998. Statistical downscaling of general circulation model output: A comparison of methods.
Water Resources Research 34:2995-3008.
Page 3-16
Description SDSM is a user-friendly software package designed to implement statistical downscaling
methods to produce high-resolution monthly climate information from coarse-resolution
climate model (GCM) simulations. The software also uses weather generator methods to
produce multiple realizations (ensembles) of synthetic daily weather sequences.
Appropriate Use SDSM can be used whenever impact assessments require small-scale climate scenarios,
provided quality observational data and daily GCM outputs for large-scale climate variables
are available.
Key Output Site-specific daily scenarios for maximum and minimum temperatures, precipitation,
humidity. SDSM also produces a range of statistical parameters such as variances, frequencies
of extremes, spell lengths.
Key Input Quality observed daily data for both local-scale and large-scale climate variables to calibrate
and validate the statistical model(s). Daily GCM outputs for large-scale variables for future
climate to drive the model(s). The current version (4.2) contains observed data libraries for
use in model calibration, and GCM data for making future projections.
Ease of Use The user-friendly software is largely self explanatory. It comes with comprehensive
instructions for use.
Training Required Requires little training for those familiar with climate science but it requires expert knowledge
and reiterated efforts to establish realistic and accurate statistical relationships.
Training Available There are currently no plans for any training courses.
Computer SDSM 4.2 has been tested on the following minimum specifications:
Requirements PC Windows 98/NT/2000/XP (it may also work on Windows 95 but has not been tested on
this OS);
Memory - 5 MB RAM, 48 MB ROM;
Processor - 133 MHz;
Coding language - Visual Basic 6.0.
Note: for older machines SDSM may work but may crash or take longer to perform certain
analyses when large data sets are processed.
Documentation Numerous publications in the scientific literature. User’s manual at https://co-
public.lboro.ac.uk/cocwd/SDSM/SDSMManual.pdf.
Applications Widely applied in many regions and over a range of climate impact sectors. See References
(below) for examples of applications.
Contacts for New users can register and download the software package at https://co-
Framework, public.lboro.ac.uk/cocwd/SDSM/.
Documentation,
Technical
Assistance
Cost SDSM is free.
References Please see https://co-public.lboro.ac.uk/cocwd/SDSM/refs.html for a full list of SDSM
references.
Page 3-17
Description Downscaling is a method for obtaining high-resolution climate or climate change information
from relatively coarse-resolution global climate models (GCMs). Typically, GCMs have a
resolution of 150-300 km by 150-300 km. Many impacts models require information at scales
of 50 km or less, so some method is needed to estimate the smaller-scale information.
Dynamical downscaling uses a limited-area, high-resolution model (a regional climate model,
or RCM) driven by boundary conditions from a GCM to derive smaller-scale information.
RCMs generally have a domain area of 106 to 107 km2 and a resolution of 20 to 60 km.
Appropriate Use Dynamical downscaling can be used whenever impacts models require small-scale data.
Key Output Small-scale information on future climate or climate change.
Key Input Typically six-hourly, gridpoint GCM data for future climate to drive the RCM.
Ease of Use Requires considerable expertise in climate modeling — for specialists only.
Training Required Considerable knowledge and experience required.
Training Available No specific training courses available.
Computer Same computer requirements as a GCM — i.e., high-level supercomputer or massive parallel
Requirements computer.
Documentation Numerous publications in the scientific literature.
Applications Widely applied in many regions and over a range of climate impact sectors. For a specific
example, see Hay and Clark (2003) in References below.
Contacts for None.
Framework,
Documentation,
Technical
Assistance
Cost High. Impractical except for academic or government institutions.
References Ding, D.J. Griggs, M. Noguer, P.J. van der Linden, X. Dai, K. Maskell, and C.A. Johnson
(eds.). Cambridge University Press, Cambridge, UK, pp. 583-638.
Hay, L.E. and M.P. Clark. 2003. Use of statistically and dynamically downscaled
atmospheric model output for hydrologic simulations in three mountainous basins in the
western United States. Journal of Hydrology 282:56-75.
Leung, L.R., L.O. Mearns, F. Giorgi, and R.L. Wilby. 2003. Workshop on regional climate
research: Needs and opportunities. Bull. Amer. Met. Soc. 84:89-95.
Giorgi, F., B. Hewitson, J. Christensen, M. Hulme, H. Von Storch, P. Whetton, R. Jones, L.
Mearns, and C. Fu. 2001. Regional climate information — Evaluation and projections. In
Climate Change 2001. The Scientific Basis, Contribution of Working Group I to the Third
Assessment Report of the Intergovernmental Panel on Climate Change, J.T. Houghton, Y.
Page 3-18
MAGICC/SCENGEN
Description MAGICC/SCENGEN is a user-friendly software package that takes emissions scenarios for
greenhouse gases, reactive gases, and sulfur dioxide as input and gives global-mean
temperature, sea level rise, and regional climate as output. MAGICC is a coupled gas-
cycle/climate model. It has been used in all IPCC reports to produce projections of future
global-mean temperature and sea level change, and the present version reproduces the results
given in the IPCC Third Assessment Report (TAR). MAGICC can be used to extend results
given in the IPCC TAR to other emissions scenarios.
SCENGEN is a regionalization algorithm that uses a scaling method to produce climate and
climate change information on a 5° latitude by 5° longitude grid. The regional results are based
on results from 17 coupled atmosphere-ocean general circulation models (AOGCMs), which
can be used individually or in any user-defined combination.
Appropriate Use Can be used whenever future atmospheric composition, climate or sea level information is
needed.
Key Output MAGICC gives projections of global-mean temperature and sea level change. SCENGEN
gives the following regional outputs on a 5° latitude by 5° longitude grid: changes in or
absolute values of temperature and precipitation, changes in or absolute values of temperature
and precipitation variability, signal-to-noise ratios based on intermodel differences or temporal
variability, and probabilities of temperature and precipitation change above a specified
threshold. The software also quantifies uncertainties in these outputs.
Key Input Emissions scenarios for all gases considered in the SRES (Special Report on Emissions
Scenarios) scenarios: CO2, CH4, N2O, CO, NOx, VOCs, SO2, and the primary halocarbons
considered by the Kyoto Protocol (including SF6). The user also has control over various
climate model and gas-cycle model parameters.
Ease of Use The user-friendly software is largely self explanatory. It comes with a user manual and a
technical manual.
Training Required Requires little training for those familiar with basic climate science.
Training Available A training course for an earlier version was held in 2000, but there are currently no plans for
future courses.
Computer • Windows 95/98/NT/2000/XP
Requirements • 64 MB RAM
• 100 MB free disk space
below.
Contacts for The primary developer, Tom Wigley, can be contacted at wigley@ucar.edu.
Framework, See also: http://www.cru.uea.ac.uk/~mikeh/software.
Documentation,
Technical
Assistance
Cost MAGICC/SCENGEN is free.
Page 3-19
MAGICC/SCENGEN (cont.)
References Santer, B.D., T.M.L. Wigley, M.E. Schlesinger, and J.F.B. Mitchell. 1990. Developing
Climate Scenarios from Equilibrium GCM Results. Max-Planck-Institut für Meteorologie
Report No. 47, Hamburg, Germany. Wigley, T.M.L. and S.C.B. Raper. 1992. Implications for
climate and sea level of revised IPCC emissions scenarios. Nature 357:293-300.
Wigley, T.M.L. and S.C.B. Raper. 2001. Interpretation of high projections for global-mean
warming. Science 293:451-454.
Wigley, T.M.L. and S.C.B. Raper. 2002. Reasons for larger warming projections in the IPCC
Third Assessment Report. Journal of Climate 15:2945-2952. Other information is given in the
atmospheric chemistry, climate projections, and sea level chapters of the IPCC TAR Working
Group 1 report, Houghton, J.T., Y. Ding, D.J. Griggs, M. Noguer, P.J. van der Linden,
D. Xiaosu, and K. Maskell (eds.). 2001. Climate Change 2001: The Scientific Basis.
Cambridge University Press, New York.
Wigley,T.M.L., Raper,S.C.B., Hulme,M. and Smith,S. 2000. The MAGICC/SCENGEN
Climate Scenario Generator: Version 2.4, Technical Manual, Climatic Research Unit, UEA,
Norwich, UK, 48pp.
Wigley, T.M.L. 1993. Balancing the carbon budget. Implications for projections of future
carbon dioxide concentration changes. Tellus 45B:409-425. Raper, S.C.B., T.M.L. Wigley,
and R.A. Warrick. 1996. Global sea level rise: past and future. In Sea-Level Rise and Coastal
Subsidence: Causes, Consequences and Strategies, J. Milliman and B.U. Haq (eds.). Kluwer
Academic Publishers, Dordrecht, The Netherlands, pp. 11-45.
Page 3-20
Weather Generators
Description Weather generators are not, strictly speaking, downscaling techniques, but are often used in
conjunction with the techniques outlined in this section. A weather generator is a statistical
model used to generate realistic daily sequences of weather variables — precipitation,
maximum and minimum temperature, humidity, etc. Such data are often referred to as
synthetic data. Usually precipitation sequences are generated first, and other data sequences
are derived using statistical relationships between these data and precipitation, with different
relationships used for wet and dry days. Precipitation is divided into an occurrence process
(i.e., whether the day is wet or dry) modeled as a Markov chain, and an amount process (the
amount of precipitation on a wet day) sampled randomly from an appropriate distribution,
such as a Gamma distribution. By using different random seeds, a large number of sequences
can be generated, all of which have the same statistical properties as the original data used to
calibrate the statistical model — akin to realizations from a set of parallel universes. This is a
crucial factor in assessing uncertainties associated with the chaotic nature of daily weather
variability. The SDSM software has a weather generator component.
Appropriate Use Weather generators are used whenever impacts models require small-scale data on a daily time
scale, provided suitable observed data are available to derive the statistical relationships.
Key Output Station-level information on future precipitation, maximum and minimum temperatures,
humidity, etc.
Key Input Appropriate observed data to calibrate and validate the statistical model(s). GCM data for
future climate to drive the model(s).
Ease of Use There are a number of weather generator software packages requiring different levels of
expertise for their use (see References below). The user-friendly software in SDSM’s weather
generator component is largely self explanatory and comes with comprehensive instructions
for use.
Training Required Requires little training for those familiar with basic climate science.
Training Available There are currently no plans for future courses.
Computer Personal computer. Specific requirements will depend on the selected weather generator.
Requirements
Documentation Numerous publications in the scientific literature. The earliest papers date from the 1960s.
below.
Contacts for New users of SDSM can register at http://www.sdsm.org.uk/.
Framework,
Documentation,
Technical
Assistance
Cost Depends on the weather generator. SDSM, for example, is free.
Page 3-21
Weather Generators (cont.)
References Nicks, A.D., L.J. Lane, and G.A. Gander. 1985. Weather generator. In USDA-Water Erosion
Prediction Project: Hillslope Profile and Watershed Model Documentation, D.C. Flanagan
and M.A. Nearing (eds.). USDA-ARS National Soil Erosion Research Lab. Report No. 10,
West Lafayette, IN.
Richardson, C.W. 1981. Stochastic Simulation of daily precipitation, temperature and solar
radiation. Water Resources Research 17:182-190.
Wilby, R.L., Hay, L.E. and G.H. Leavesley. 1999. A comparison of downscaled and raw GCM
output: implications for climate change scenarios in the San Juan river basin, Colorado.
Journal of Hydrology 225:67-91.
Wilks, D.S. and R.L. Wilby. 1999. The weather generation game: A review of stochastic
weather models. Progress in Physical Geography 23:329-357. (See also SDSM.)
Page 3-22
COSMIC2 (COuntry Specific Model for Intertemporal Climate Vers. 2)
Description The COSMIC2 model provides climate-change impact modellers and policy analysts a flexible
system that can produce a full range of dynamic country-specific climate-change scenarios.
The need for this type of modeling capability was discussed at the IPCC Asia-Pacific
Workshop on Integrated Assessment Models held in Tokyo in 1997. That Workshop aimed at
improving communication between experts in a variety of disciplines and policy
analysts/policy makers. One goal was to expand the use of integrated-assessment modelling
for addressing the potential impacts of climate change in a way that better reflected the
experiences of researchers from developing countries. These researchers (and others at
universities around the world) may not have access to state-of-the-art transient general
circulation model (GCM) simulations. The expense of running these supercomputer models
limits their availability and ease of use. The COSMIC2 model helps remove this limitation.
COSMIC2 can provide easy access to credible climate-change scenarios that are consistent
with the state-of-the-art, fully coupled, transient ocean-atmosphere GCM simulations.
Appropriate Use Can be used for estimating country level climate change. The climate change scenarios can be
used in impact, vulnerability, and adaptation assessments.
Scope Provides country level (158 countries) climate change and sea level rise estimates from 2000
up to 2200 for 28 emission scenarios. These include the initial IPCC stabilization scenarios,
SRES, and post-SRES CO2 stabilization scenarios.
Key Output. Monthly mean temperature and precipitation along with annual global mean temperature
change, sea level rise, and equivalent CO2 concentration.
Key Input The user chooses one of 14 GCM’s, the country, one of 28 emission scenarios and various
climate model parameters (climate sensitivity, sulphate scenario, and sulphate forcing) along
with the terminal year.
Ease of Use The installation and use assume average competence with personal computers. There is a built-
in help facility.
Training Required Requires some familiarity with climate change literature. IPCC publications would provide all
necessary background information.
Training Available Training courses for an earlier version (COSMIC) were held in various countries under the US
Department of Energy Country Studies Program. There are currently no plans for additional
courses.
Computer Personal computer with Windows XP/2000/9X operating system.
Requirements
Applications COSMIC is in use by 130 research groups in 50 countries.
Contacts for COSMIC2 was developed by:
Framework, Michael E. Schlesinger, Department of Atmospheric Sciences, University of Illinois at
Documentation, Urbana-Champaign; e-mail: schlesin@atmos.uiuc.edu.
Technical Larry J. Williams, Global Climate Change Research, Electric Power Research Institute;
Assistance e-mail: ljwillia@epri.com.
Cost The software is free. Send request to Larry J. Williams (ljwillia@epri.com)
Page 3-23
COSMIC2 (COuntry Specific Model for Intertemporal Climate Vers. 2) (cont.)
References Schlesinger, M.E. and S. Malyshev, ‘Changes in near-surface temperatures and sea level for
the Post-SRES CO2-stabiliztion scenarios’, Integrated assessment, 2: 95-110.
Schlesinger, M.E., S. Malyshev, E.V. Rozanov, F. Yang, N.G. Andronova, B. de Vries, A.
Grübler, K. Jiang, T. Masui, T. Morita, J. Penner, W. Pepper, A. Sankovski and Y. Zhang,
‘2000: Geographical distributions of temperature change for scenarios of greenhouse gas and
sulfur dioxide emissions.’, Tech. Forecast. Soc. Change, 65, 167-193.
Williams, Larry J., Shaw, Daigee, Mendelsohn, Robert: 1998,'Evaluating GCM Output with
Impact Models', Climatic Change, 39: 111-133.
Yohe, Gary and Schlesinger, Michael E.: 1998,'Sea-Level Change: The Expected Economic
Cost of Protection or Abandonment in the United States', Climatic Change, 38: 337-472.
Page 3-24
Description PRECIS is essentially a regional climate modeling system. It is based on the third generation
of the Hadley Centre’s regional climate model (HadRM3), together with user-friendly data
processing and a visualization interface. Its flexible design allows for applications in any
region of the world. Like any other regional climate model, PRECIS is driven by boundary
conditions simulated by general circulation models (GCMs). To facilitate the application,
boundary conditions simulated by the Hadley Centre GCM experiments forced by four SRES
marker scenarios are supplied with the software.
Appropriate Use PRECIS can be used to generate finer-resolution, physically consistent regional climate
projections when GCM outputs are not sufficient to provide regional details as required by
V&A assessment.
Scope Any region in the world (with a minimum area of 5,000km by 5,000 km) given that sufficient
observed data are available to validate model outputs.
Key Output (Typically) hourly climate variables at approximately 50 km horizontal resolution.
Key Input Modeling domain, details of the driving GCM experiment, length of integration, specification
of output files.
Ease of Use Requires considerable expertise in climate modeling.
Training Required Considerable knowledge and experience required.
Training Available Attendance at training workshops (funded from a variety of UK Government sources over the
years) are a pre-condition of provision of PRECIS. To date workshops have been held in
South Africa, Cuba, Bhutan, Brazil, India, Turkey, Argentina, Ghana, and five in the United
Kingdom. Hadley Centre staff are subsequently available (via email etc.) for consultation.
Further workshops are planned..
Computer A PC running the Linux operating system is required. It should have a minimum
Requirements specification of a 1GHz processor, 500 Mb of memory, 60 Gb of disk space, and a tape drive
to allow offline storage. A PC with a 1.4 GHz Athlon processor takes approximately 4~6
months to carry out a 30-year simulation.
Documentation Information on PRECIS is available at http://precis.metoffice.com/ and covers aspects such
as availability, support and requirements.
Applications The model has been provided for use in several regions, including south Asia, central
America, southern Africa and China. PRECIS modelling underlies sectoral impacts
modelling work within Defra-funded research projects in India and China.
Contacts for The Regional Modelling Group at the Hadley Centre, Met Office, Hadley Centre, FitzRoy
Framework, Road, Exeter, Devon, EX1 3PB, United Kingdom, Tel: +441344.854938;
Documentation, Fax: +44.1344.854898; e-mail: précis@metoffice.com.
Technical
Assistance
Page 3-25
Cost The PRECIS DVD will be supplied to institutions free of charge (subject to the terms of the
PRECIS license agreement) by the Hadley Centre only in conjunction with a PRECIS
workshop . In keeping with the objectives behind the development of PRECIS, priority will
be given to training users in developing countries, providing funding can be found to deliver
the courses.
The software, together with a suite of supporting materials and boundary condition data, are
provided free of charge to developing countries and countries with economy in transition.
Users from institutions in developed countries will be assessed a charge of 5000 Euros plus
17.5% VAT. This charge contributes to the costs of development and providing training.
References Please see http://precis.metoffice.com/other_links.html for links to projects, reports and
publications.
Page 3-26
3.1.3 Socioeconomic scenarios
Developing Socioeconomic Scenarios: For Use in Vulnerability and Adaptation Assessments

Description This UNDP manual provides approaches to developing scenarios of the future, both without
climate change and with climate change and adaptation. The first part of the guidance is
consistent with the IPCC’s Special Report on Emissions Scenarios: development of qualitative
“storylines” of the future and selection of proxy values to represent important elements of
socioeconomic conditions, all supplemented by research and quantitative data, as appropriate.
The second part of the guidance demonstrates an approach to sectoral scenarios by using
quantitative indicators to calculate food security. Moreover, the guidance recommends a
stakeholder involvement process.
Appropriate Use The guidance can be used in analyses of vulnerability and adaptation to climate change at
local, sectoral, regional, and national scales. Thus, the scenarios can contribute to developing
countries’ National Communications, National Adaptation Programmes of Action (NAPAs),
and grant proposals to, e.g., the Global Environment Facility (GEF).
Scope Local, sectoral, regional, and national.
Key Output A qualitative or qualitative and quantitative description of the social and economic
characteristics of a sector or geographical location as they exist currently and may evolve in
the future. The descriptions are focused on key variables, called proxy values, which
summarize or otherwise simplify relevant information.
Key Input Qualitative and/or quantitative information on the sector or region of interest.
Ease of Use Depends on complexity of data gathering and analytic techniques chosen — from rigorous
stakeholder input and other qualitative methods to complex, model-based techniques.
Training Required No training required, unless unfamiliar models are chosen for use.
Training Available No formal training currently offered.
Computer None, unless project teams choose computer-based methods.
Requirements
Documentation Developing Socioeconomic Scenarios: For Use in Vulnerability and Adaptation Assessments.
May 2001. Available at http://ncsp.undp.org/report_detail.cfm?Projectid=151.
Applications Has been piloted in several countries; will be used in conjunction with the UNDP’s Adaptation
Policy Framework to develop adaptation strategies, policies, and measures (see APF summary
table in Chapter 2).
Contacts for Bo Lim, Chief Technical Advisor, National Communications Support Programme, UNDP-
Framework, GEF, Room 1607, 304 East 45th St, NY, NY 10017, USA;
Documentation, Tel: 1.212.906.5730; Fax: 1.212.906.6568; e-mail: bo.lim@undp.org.
Technical
Assistance
Cost No cost.
References See Documentation above and APF summary table in Chapter 2
(http://ncsp.undp.org/report_detail.cfm?Projectid=151).
Page 3-27
Description The UNEP Handbook describes an approach to developing sectoral assessments of impacts
and adaptation. In general, analysts are encouraged to use existing scenarios of both
socioeconomic conditions and climate change, to integrate them, and to develop adaptation
strategies. The definition of socioeconomic includes demographic and economic data,
technology, legislation, culture, decision-making processes – “everything that shapes a
society.” Table 2.1 in the handbook lists relevant variables for each of the sectors covered
(water resources, coastal zones, agriculture, human health, energy, forestry, livestock and
grasslands, wildlife and biodiversity, and fisheries). Sources for data-based scenarios are
given, and using multiple scenarios is recommended. Specific guidance is sparse.
Appropriate Use The Handbook can be used for analyses of sectoral impacts and adaptation to climate change.
Scope Local, sectoral, regional, and national. However, sources for existing socioeconomic scenarios
are global and regional only, except for the World Bank, which includes countries.
Key Output Scenarios that are either “borrowed” from the literature or “inspired” by historical trends and
geographical analogues.
Key Input Qualitative and/or quantitative information on the sector of interest.
Ease of Use Relatively easy, especially if literature sources are used instead of primary data gathering and
scenario development.
Training Required No training required.
Computer None, although data may be downloaded from sources such as the World Bank and
Requirements manipulated by spreadsheet or other computer-based programs.
Documentation Feenstra, J.F., I. Burton, J.B. Smith, and R.S.J. Tol (eds.). 1998. Handbook on Methods for
Climate Change Impact Assessment and Adaptation Strategies. Version 2.0. Available at
http://www.falw.vu.nl/images_upload/151E6515-C473-459C-85C59441A0F3FB49.pdf
Applications The first phase of the Netherlands Climate Change Study Assistance Programme (NCCSAP)
lists 17 countries where socioeconomic scenarios are being or will be developed. The projects’
synopses explicitly mention development of climate scenarios and socioeconomic scenarios to
be used in the impact and adaptation studies. Information is on
http://www.ivm.falw.vu.nl/Research_projects/index.cfm/home_subsection.cfm/subsectionid/C
BFAAE8F-05BA-4EA0-A7C17193212663D0. The book 'Climate Change in Developing
Countries' mentioned on this site may be of interest as well.
Contacts for Dr. Michiel van Drunen, Institute for Environmental Studies, Vrije Universiteit, Amsterdam;
Framework, e-mail: michiel.van.drunen@ivm.falw.vu.nl
Documentation,
Technical
Assistance
Cost No cost.
References See Documentation above.
Page 3-28
Qualitative and Quantitative Scenarios Emphasizing Stakeholder Input
Description The second and third steps of the Adaptation Policy Framework (APF) (see Chapter 2 for a
description of the entire framework), assessing current vulnerability and characterizing future
climate risks, involve developing socioeconomic scenarios (called “conditions and prospects”).
Technical Paper 6 is devoted to guidance on this topic. Users are advised to include indicators
(qualitative or quantitative or a mix of both) in five categories: demography, economics, natural
resource use, governance/policy, and culture. The baseline should include current adaptations to
current climate. Users are then given guidance on constructing storylines of the future and
exploring at least two significantly different but possible futures.
Appropriate Use The guidance on socioeconomic scenarios is designed as part of a larger process of developing
adaptation strategies, policies, and measures. Other analyses that interact with socioeconomic
scenarios are climate risks and vulnerability analyses. Crosscutting guidance is given on
involving stakeholders and increasing adaptive capacity.
Scope Local, sectoral, regional, and national. The APF will be most useful at the local and sectoral
levels.
Key Output Scenarios that include demographic, economic, governance/policy, and cultural indicators and
data.
Key Input Qualitative and/or quantitative information from various sources, including expert and
stakeholder input.
Ease of Use The whole APF process requires a substantial commitment of time and resources; the scenario
portion can be developed using existing data and stakeholder input or more sophisticated
methods such as tailored computer-based models.
Training Required No training required.
Training Available Formal training is being planned but is not currently offered.
Computer None.
Requirements
Documentation See http://ncsp.undp.org/report_detail.cfm?Projectid=151 for the User’s Guidebook and the
Nine Technical Papers.
Applications GEF projects in Latin America are being designed using the APF, but it has not yet been
employed in the projects.
Contacts for Bo Lim, Chief Technical Advisor, National Communications Support Programme, UNDP-GEF,
Framework, Room 1607, 304 East 45th St, NY, NY 10017, USA;
Documentation, Tel: 1.212.906.5730; Fax: 1.212.906.6568; e-mail: bo.lim@undp.org.
Technical
Assistance
Cost No cost.
Page 3-29
Description The UKCIP socio-economic scenarios (SES) describe how society may change in the future in
accordance with policy decisions made in the future. The SES should be used together with
climate change emission scenarios to produce an integrated assessment of potential impacts
under climate change.
Appropriate Use The SES can be used in climate change impacts and vulnerability and assessments, and to
consider the capacity different types of future worlds will have to cope with climate change.
Scope They should be used for UK-based studies only.
Key Output A description of future worlds in which climate changes might occur.
Key Input Various social and economic indices.
Ease of Use Users generally find these difficult to apply as they are not quantitative, and those used to
assessing physical climate impacts may not feel comfortable dealing with socio-economic
issues. Where the SES have been used, they have been found to have a major impact on study
findings.
Training Required Understanding of SES and their application is helpful.
Training Available No formal training supplied, but UKCIP can advise on application.
Computer None.
Requirements
Documentation Technical report on SES. Reference below.
Applications The SES have been used in a number of UKCIP scoping studies. Some of them are included in
the report (reference below). Also see the UKCIP website (www.ukicp.org.uk) for further
information on applications.
Contacts for Tools, Megan Gawith, Scientific Officer, UKCIP; e-mail: megan.gawith@ukcip.org.uk.
Documentation,
Technical
Assistance
Cost None.
References UK Climate Impacts Programme. 2001. Socio-economic scenarios for climate change impact
assessment: a guide to their use in the UK Climate Impacts Programme. UKCIP, Oxford.
Page 3-30
3.2 Decision Tools
The tools described in this section assist analysts in making choices between adaptation options
(Table 3.2). Some of these tools rely on a single monetary metric and focus on a single decision
criterion (e.g., benefit-cost analysis, cost-effectiveness). Others enable the user to define and
incorporate more than one such decision criterion (e.g., MCA and the three examples of which,
TEAM, Adaptation Decision Matrix, and screening of adaptation options, are included in this
section). Other tools are more generally aimed at supporting decision and policy makers who are
faced with identifying and appraising the selection and implementation of adaptation measures,
taking into account the institutions involved and affected when pursuing given adaptation
options.
Table 3.2. Decision tools

Policy Exercise
Cost-Effectiveness
Climate-Related Risks Estimate as Indicators of Necessity for
Adaptation Responses
Adaptation Actions
Community-based Risk Screening Tool – Adaptation &
Livelihoods (CRiSTAL)
Page 3-31
Policy Exercise
Description A flexible structured method designed to synthesize and assess knowledge from several relevant
fields of science for policy purposes directed toward complex, practical management problems.
Policy exercise techniques provide an interface between scientists, academics, and policy
makers. At the heart of the process are scenario writing (“future histories,” emphasizing
nonconventional, surprise rich, but still plausible futures) and scenario analyses via the
interactive formulation and testing of alternative policies that respond to challenges in the
scenario. These scenario based activities typically take place in an organizational setting
reflecting the institutional feature of the issues that are addressed.
Appropriate Use Policy exercise can be used to generate adaptation options or evaluate already identified
adaptation options, especially in the early phases of regional adaptation studies when there is a
strong need to structure the problem or in later phases to determine if sectoral policy responses
might support or undermine each other.
Scope All regions, all sectors.
Key Output Scenarios that inform the adaptation decision process and increase understanding of the
organizational and institutional setting in which the process is carried out.
Key Input Views and ideas of representatives from key institutions.
Ease of Use Depends on participation of experienced facilitators.
Training Required Little or no training would be required for participants. Facilitators and support staff require
specialized training.
Training Available No formal training offered. Sources of assistance in organizing a policy exercise can be
obtained from contact listed below.
Computer Use of personal computers may be necessary to support the variety of models that the exercise
Requirements might employ.
Documentation Toth, F.L. 1998. Policy exercises: Objectives and design elements. Simulation and Games
19:235-255.
Toth, F.L. 1998. Policy exercises: Procedures and implementation. Simulation and Games
19:256-276.
Applications Southeast Asia (see References below). The exercises involved senior national-level policy
makers and senior analysts exploring policy responses under different climate change and
impact scenarios.
Contacts for Ferenc Toth, International Atomic Energy Agency, Wagramer Str. 5 P.O. Box 100, A-1400,
Framework, Vienna, Austria; Tel: +43.1.2600.22787; e-mail: F.L.Toth@iaea.org.
Documentation,
Technical
Assistance
Cost No cost to obtain documentation and supplementary information. Cost of implementing will
depend upon the scope of inquiry.
Page 3-32
Policy Exercise (cont.)
References Brewer, G.D. and M. Shubik. 1979. The War of Game: A Critique of Military Problem Solving.
Harvard University Press, Cambridge, MA.
Toth, F.L. and E. Hizsnyik. 2005. Managing the inconceivable: participatory assessments of
impacts and responses to extreme climate change. International Institute for Applied Systems
Analysis. Working Paper FNU74.
Toth, F.L. 1992a. Global change and the cross-cultural transfer of policy games. In Global
Interdependence. D. Crookall and K. Arai (eds.). Springer, Tokyo, pp. 208-215.
Toth, F.L. 1992b. Policy implications. In The Potential Socioeconomic Effects of Climate
Change in South-East Asia, M.L. Parr, M. Blantran de Rozari, A.L. Chong, and S. Panich (eds.).
United Nations Environment Programme, Nairobi, Kenya, pp. 109-121.
Toth, F.L. 1992c. Policy responses to climate change in Southeast Asia. In The Regions and
Global Warming: Impacts and Response Strategies, J. Schmandt and J. Clarkson (eds.) Oxford
University Press, New York, pp. 304-322.
Toth, F.L. 2003. State of the art and future challenges for integrated environmental assessment.
Integrated Assessment 4(4):250-264.
Page 3-33
Description This approach uses a conceptual framework for analyzing an adaptation measure by identifying,
quantifying, and monetizing the costs and benefits associated with the measure. Spreadsheet
software is often used to facilitate analysis; however, the specific approaches used are highly
dependent on the measure under consideration. This tool can be used to determine whether the
benefits of the adaptation measure outweigh the costs, whether net benefits are maximized, and
how the measure compares to other options.
Appropriate Use A benefit-cost analysis is useful when the adaptation being considered is likely to involve
significant expenditures of capital and labor. Benefit-cost analyses of adaptation responses often
involve a high degree of uncertainty when quantifying nonmarket goods and services as well as
when anticipating the direction and magnitude of climate change.
Scope All locations; all sectors; national or site-specific.
Key Output A monetary comparison of the costs and benefits of a proposed adaptation measure.
Key Input Quantitative values for all significant costs and benefits associated with the proposed response.
Ease of Use A major undertaking, involving extensive research and economic analysis.
Training Required Knowledge in economics as well as training in estimating the monetary values of costs and
benefits. Knowledge of physical sciences related to benefits.
Training Available Contact Stratus Consulting for more information (see Contacts below).
Computer Lotus 1-2-3 or Excel spreadsheet software helpful.
Requirements
Documentation The World Bank. Environmental Assessment Sourcebook:
Vol. 1. Policies, Procedures, and Cross-Sectoral Issues. Published October 1996 by World Bank
ISBN: 0-8213-1843-8 SKU: 11843
Vol. 2. Sectoral Guidelines. Published September 1995 by World Bank ISBN: 0-8213-1844-6
SKU: 11844
Vol. 3. Guidelines for Environmental Assessment of Energy and Industry Projects. Published
December 1994 by World Bank ISBN: 0-8213-1845-4 SKU: 11845
Available at http://publications.worldbank.org/ecommerce/catalog/product-
detail?product_id=194213&
Applications Used to evaluate sea level rise adaptation options in Maine, USA.
Contacts for Tools, Bob Raucher, Stratus Consulting, P.O. Box 4059, Boulder, CO 80306 USA;
Documentation, Tel: +1.303.381.8000; Fax: +1.303.381.8200;
Technical e-mail: braucher@stratusconsulting.com; website: http://www.stratusconsulting.com/.
Assistance
Cost Price of Vol. 1: $ 22.00. Price of Vol. 2: $ 30.00. Price of Vol. 3: $ 22.00. Analysis entails a
high cost in terms of time for an economic analyst. Method can be modified if financial
constraints prohibit a full-scale analysis.
References Smith, J.B., S.E. Ragland, R.S. Raucher, and I. Burton. 1997. Assessing Adaptation to Climate
Change: Benefit-Cost Analysis. Report to the Global Environment Facility, prepared by Hagler
Bailly Services, Inc., Boulder, CO, USA.
Tol, R.J.S. 2000. Equitable Cost-Benefit Analysis of Climate Change. In Efficiency and
Equity of Climate Change Policy, Carlo Carraro (ed.). Dordrecht, The Netherlands: Kluwer
Academic Publishers. 368pp.
Page 3-34
Cost-Effectiveness
Description Cost-effectiveness analysis takes a predetermined objective and seeks ways to accomplish it as
inexpensively as possible. Unlike cost-benefit analysis, the level of the benefit is treated as an
external given, and the objective of the analysis is to minimize the costs associated with the
achievement of this specified objective.
Appropriate Use Cost-effectiveness on the adaptation side might be used when, under different climate change
scenarios, a required minimum level of a public good or service (e.g., flood protection) is
specified and the option to deliver this good at the lowest cost is sought. Also particularly
applicable to those cases where the analyst may be unwilling or unable to monetize the most
important policy impact. Cost-effectiveness is generally more applicable for individual project
decisions that are applying decision rules or procedures which have already been determined in
policy, strategic, or program decisions.
Scope All regions. Can be difficult to apply to those sectors where the market does not apply a
satisfactory measure of value for costs.
Key Output Ranking of alternatives relative according to cost-effectiveness.
Key Input Cost data for a specified level of policy outcome.
Ease of Use Can be a significant undertaking. Valuing nonmarket goods can require knowledge of
specialized techniques.
Training Required Knowledge of economics as well as training in estimating the monetary values of costs,
especially nonmarket values.
Requirements
Documentation Boardman, A.E., D.H. Greenberg, A.R. Vining and D.L. Weimer. 1996. Cost-Benefit Analysis:
Concepts and Practice. Prentice Hall, Upper Saddle River, NJ, USA.
Applications Analysis of pathways to stabilization. See also UKCIP and APF frameworks in Chapter 2.
Contacts for Bob Raucher, Stratus Consulting, P.O. Box 4059, Boulder CO 80306;
Framework, Tel: +1.303.381.8000; e-mail: braucher@stratusconsulting.com;
Documentation, website: http://www.stratusconsulting.com/
Technical
Assistance
Cost Method can entail a high cost in terms of time for an economic analyst.
References Goulder, L.H. and S.H. Schneider. 1999. Induced technological change and the attractiveness of
CO2 emissions abatement policies. Resource and Energy Economics 21:211-253.
Ha-Duong, M., M. Grubb, and J.C. Hourcade. 1997. Influence of socioeconomic inertia and
uncertainty on optimal CO2 emission abatement. Nature 390:270-273.
Wigley, T.M.L., J. Edmonds, and R. Richels. 1996. Economic and environmental choices in the
stabilization of atmospheric CO2 concentrations. Nature 379(6582):240-243.
Page 3-35
Description MCA describes any structured approach used to determine overall preferences among
alternative options, where the options accomplish several objectives. In MCA, desirable
objectives are specified and corresponding attributes or indicators are identified. The actual
measurement of indicators need not be in monetary terms, but are often based on the
quantitative analysis (through scoring, ranking and weighting) of a wide range of qualitative
impact categories and criteria. Different environmental and social indicators may be developed
side by side with economic costs and benefits. Explicit recognition is given to the fact that a
variety of both monetary and nonmonetary objectives may influence policy decisions. MCA
provides techniques for comparing and ranking different outcomes, even though a variety of
indictors are used. MCA includes a range of related techniques, some of which follow this entry.
Appropriate Use Multicriteria analysis or multiobjective decision making is a type of decision analysis tool that is
particularly applicable to cases where a single-criterion approach (such as cost-benefit analysis)
falls short, especially where significant environmental and social impacts cannot be assigned
monetary values. MCA allows decision makers to include a full range of social, environmental,
technical, economic, and financial criteria.
Scope All regions, all sectors.
Key Output A single most preferred option, ranked options, short list of options for further appraisal, or
characterization of acceptable or unacceptable possibilities.
Key Input Criteria of evaluation as well as relevant metrics for those criteria.
Ease of Use Depends on the particular MCA tool employed. All rely on the exercise of some expert
judgment.
Training Required Choice and application of appropriate MCA technique require some expertise, but can be
acquired fairly easily.
Training Available The United Kingdom Department for Transport Local Government and the Regions (see
Documentation) provides nontechnical descriptions of MCA techniques, potential areas of
application, and criteria for choosing between different techniques, and sets out the stages
involved in carrying out MCA.
Requirements
Documentation DEFRA. 2003. Use of multi-criteria analysis in air quality policy: A Report.
DTLR. 2001. Multi Criteria Analysis: A Manual.
ETR. 1999. Review of Technical Guidance on Environmental Appraisal: A Report by
Economics for the Environment Consultancy
(http://www.defra.gov.uk/environment/economics/rtgea/8.htm).
Applications World Commission on Dams. Integrated Decision Making Framework.
(http://www.dams.org/report/contents.htm). World Conservation Union Office for West Africa.
Sustainable Development Planning Process (http://www.iucn.org/themes/wetlands/). Tyndall
Center for Climate Change Research. Framework for Carbon Mitigation Projects
(http://www.tyndall.ac.uk/publications/working_papers/wp29.pdf).
Page 3-36
Multicriteria Analysis (MCA) (cont.)
Contacts for For general information and contact information for sources of assistance for particular tools:
Framework, Stratus Consulting, P.O. Box 4059, Boulder CO 80306; Tel: +1.303.381.8000;
Documentation, Fax: 303.381.8200; e-mail: jsmith@stratusconsulting.com.
Technical
Assistance
Cost Depends on particular MCA tool applied, but in general is inexpensive.
References Bell, M.L., B.F. Hobbs and H. Ellis. 2003. The use of multi-criteria decision-making methods in
the integrated assessment of climate change: implications for IA practitioners. Socio-Economic
Planning Sciences 37(4):289-316.
Hamalainen, R.P. and R. Karjalainen. 1992. Decision support for risk analysis in energy policy.
European Journal of Operational Research 56:172-183.
Jones, M., C. Hope, and R. Hughes. 1990. A multi-attribute value model for the study of UK
energy policy. Journal of the Operational Research Society 41:919-929
Pearman, A.D., P.J. Mackie, A.D. May, and D. Simon. 1989. The use of multi-criteria
techniques to rank highway investment proposals. In Improving Decision Making in
Organisations, A.G. Lockett and G. Islei (eds.). Springer Verlag, Berlin, pp. 158-165.
Page 3-37
Description This software package creates graphs and tables that allow experts to compare the relative
strengths of adaptation strategies using both quantitative and qualitative criteria. TEAM assists
the user in evaluating issues such as equity, flexibility, and policy coordination. The user lists
the strategies across the top of the table and the evaluation criteria down the side, and then
enters a score indicating the relative performance of each strategy under the various criteria.
This table can then be used to construct a variety of graphs of the data. It will not necessarily
identify the optimal strategy (unless one strategy outperforms all others in all criteria), but is
instead designed to allow the user to more clearly see the strategies’ relative strengths and
weaknesses.
Appropriate Use TEAM is useful when it is important to consider a wide range of criteria and to explicitly
identify unquantifiable and uncertain aspects associated with potential adaptations. It should be
used in conjunction with other decision-making tools (e.g., cost-benefit analysis, discussion and
workshops with key decision-makers).
Scope All locations; covers coastal zones, water resources, agriculture, as well as a general assessment
component; national or site-specific.
Key Output Relative effectiveness of alternative adaptation measures across a range of criteria.
Key Input A ranking of how well policy objectives are met using alternative strategies.
Ease of Use Relatively easy to apply; more rigorous results require more analysis; only basic computer skills
are needed.
Training Required A user with an understanding of key policy objectives could achieve proficiency in 1 to 2 days.
Training Available Contact Susan Herrod-Julius for more information (see Contacts below).
Computer IBM-compatible 386 with a 3.5” drive and a mouse; Microsoft Windows 3.1 and Excel 5.0c
Requirements spreadsheet software.
Documentation The user’s manual can be obtained from Ms Susan Herrod Julius (see the email given below).
See also the web site http://www.epa.gov/eims/global/team1.pdf.
Applications Used in China, Costa Rica, Venezuela, Trinidad, Italy, Egypt, and Malawi.
Contacts for Tools, Susan Herrod-Julius, 8601D, U.S. EPA Headquarters. Ariel Rios Building, 1200 Pennsylvania
Documentation, Avenue, N.W., Washington, DC 20460; Tel: 202.564.3394; e-mail: herrod-
Technical julius.susan@epa.gov.
Assistance
Cost Free to obtain documentation.
References Smith, A., H. Chu, and C. Helman. 1996. Tool for Environmental Assessment and
Management: Quick Reference Pamphlet. Decision Focus Incorporated, Washington, DC.
Smith, A., H. Chu, and C. Helman. 1996. Documentation of Tool for Environmental
Assessment and Management. Decision Focus Incorporated, Washington, DC. Burton, I., J.
Smith, and S. Lenhart. 1998. Adaptation to climate change: Theory and assessment. In
Handbook on Methods for Climate Change Impact Assessment and Adaptation Strategies, J.
Feenstra, I. Burton, J. Smith, and R. Tol (eds.). UNEP and Vrije Universiteit Amsterdam,
Amsterdam, The Netherlands. Herrod Julius, S. and Scheraga, J.D. The TEAM Model for
Evaluating Alternative Adaptation Strategies.
Page 3-38
Description The ADM uses multicriteria assessment techniques to evaluate the relative effectiveness and
costs of adaptation options. Users are asked to specify criteria that will be used to evaluate
options and weight the criteria. Scenarios of current climate and climate change can also be
used. Users are asked to give a score (e.g., 0 to 5) on how well each criterion is met under a
particular scenario for each option. The scoring can be based on detailed analysis or expert
judgment. Scores can be multiplied by weights and summed up to estimate which options best
meet the criteria. The scores can be compared to relative costs to assess cost-effectiveness.
Appropriate Use This approach is useful when many important benefits of meeting policy objectives cannot be
easily monetized or expressed in a common metric. However, detailed research and analysis are
needed to provide a basis for the evaluation; otherwise the scoring may be mainly subjective.
Key Output Relative cost-effectiveness of alternative adaptation measures.
Key Input A ranking of how well policy objectives are met using alternative strategies; estimated costs of
adaptation measures.
Ease of Use Relatively easy to apply; more rigorous results require more analysis; only basic computer skills
are needed.
Training Required A user with an understanding of key policy objectives could achieve proficiency in 1 to 2 days;
however, additional training may be required to develop skill in estimating costs of adaptation
measures.
Computer IBM-compatible 286; Lotus 1-2-3 or Excel spreadsheet software helpful.
Requirements
Documentation Benioff, R. and J. Warren (eds.). 1996. Steps in Preparing Climate Change Action Plans: A
Handbook. Washington, DC: U.S. Country Studies Program.
USCSP. 1999. Climate Change: Mitigation, Vulnerability, and Adaptation in Developing
Applications Used by participants in the U.S. Country Studies and UNEP assistance programs
(e.g., Kazakhstan, Cameroon, Uruguay, Bolivia, Antigua, Estonia, Pakistan and Barbuda).
Contacts for Tools, Joel Smith, Stratus Consulting, P.O. Box 4059, Boulder, CO 80306 USA;
Documentation, Tel: +1.303.381.8000; Fax: +1.303.381.8200; e-mail: jsmith@stratusconsulting.com;
Technical website: http://www.stratusconsulting.com/.
Assistance
Cost No cost for documentation or diskette with template of the decision matrix.
References Mizina, S.V., J.B. Smith, E. Gossen, K.F. Spiecker, and S.L. Witkowski. 1999. An evaluation of
adaptation options for climate change impacts on agriculture in Kazakhstan. Mitigation and
Adaptation Strategies for Global Climate Change 4:25-41.
Page 3-39
Description This matrix-based decision-making tool sets up a series of criteria that allow the user to narrow
the list of appropriate adaptation measures. The user sets up a table with evaluation criteria
across the top: Will the measure target a high-priority area? Will it address targets of
opportunity? Is it likely to be effective? Will it generate other benefits (e.g., economic,
environmental)? Is it inexpensive? Is it feasible? The user can insert or substitute other criteria if
they are more appropriate. The user then evaluates each measure against these criteria, entering
a simple “yes” or “no” in the cells. This tool is frequently combined with expert judgment.
Appropriate Use This is a useful tool at the beginning of the decision-making process, allowing the user to create
a manageable although possibly subjective list of options, which can then be analyzed more
rigorously.
Key Output A simple matrix, clearly showing the strengths and weaknesses of a wide range of options.
Key Input Basic summary information about options under consideration.
Training Required Requires background knowledge of both the options and the climate change issue being
addressed.
Training Available Contact Stratus Consulting for more information (see below).
Computer IBM-compatible 286; Lotus 1-2-3 or Excel spreadsheet software helpful.
Requirements
Documentation Benioff, R. and J. Warren (eds.). 1996. Steps in Preparing Climate Change Action Plans: A
Handbook. U.S. Country Studies Program, Washington, DC.
USCSP. 1999. Climate Change: Mitigation, Vulnerability, and Adaptation in Developing
Applications Used by several participants in the U.S. Country Studies and UNEP assistance programs
(e.g., Kazakhstan, Cameroon, Uruguay, Bolivia, Antigua, Barbuda, Estonia, and Pakistan).
Contacts for Tools, Joel Smith, Stratus Consulting, P.O. Box 4059, Boulder, CO 80306; Tel: +1.303.381.8000;
Documentation, Fax: +1.303.381.8200; e-mail: jsmith@stratusconsulting.com;
Assistance
Cost No cost to obtain documentation or diskette with template of the decision matrix.
References Mizina, S.V., J.B. Smith, E. Gossen, K.F. Spiecker, and S.L. Witkowski. 1999. An evaluation of
adaptation options for climate change impacts on agriculture in Kazakhstan. Mitigation and
Adaptation Strategies for Global Climate Change 4:25-41.
Page 3-40
Climate-Related Risks Estimate as Indicators of Necessity for Adaptation Responses
Description Adaptation measures could be taken when climate-related risks to economic objects,
environment or people’s lives arise. The methodology of climate risk assessment outlines a
three step process: (1) to estimate probability of dangerous weather event or climate anomaly
on the given territory; (2) to evaluate social damage as correlation between people’s number in
the endangered region and damage probability; “fuzzy set” method could be used for complex
risk estimation; (3) to calculate damage expressed in relative or monetary units taking into
account GDP.
Appropriate Use This tool is useful when it is necessary to make decision about adaptation measures.
Key Output A quantitative estimate of climate-related risks for specific objects and processes in various
economic and social spheres.
Key Input Meteorological data about recurrence and intensity of the dangerous weather events and
climate anomalies, cost data including GDP, population in the specific region.
Training Required “Fuzzy set” method requires training in use of statistical software. Knowledge of economics
and estimating the monetary values of costs and benefits is needed.
Training Available No formal training currently offered. Sources of assistance / consulting can be obtained from
contact listed below.
Requirements
Applications Whirlwind probability assessment for the third power-generating unit of Leningrad nuclear
power station.
Contacts for Tools, Nina Kobysheva, Voejkov Main Geophysical Observatory, 194021 Karbyshev Str. 7, St.
Documentation, Petersburg, Russian Federation; Tel: +7.812.297.4390; Fax: +7.812.297.8661; e-mail:
Technical director@main.mgo.rssi.ru or kobyshnv@main.mgo.rssi.ru.
Assistance
Cost Depends on particular application.
References Akentyeva, E.M. 2006. Climate-related risks for power generation, transportation and
consumption in Russian Federation. In Proceedings - Living with Climate Variability and
Change: Understanding the Uncertainties and Managing the Risks, Espoo, Finland.
Kobysheva, N.V. and M. V. Klueva. 2000. Estimation of risk of forest fires. Risk Excellence
Notes 2(6).
Kobysheva, N.V. 2007. Adaptation measures in oil and gas industry. International Conference
“Adaptation strategies in fuel – energy sector” Nignij Novgorod, Russian Federation.
Kobysheva, N.V. 2007. The problems of weather and climate related safety and sustainable
development in technical sphere. Fifth International Conference “Actual Problems of Industrial
Safety: from Projecting to Insurance, St. Petersburg, Russian Federation.
Page 3-41
Description This costing guidance describes a method for calculating the cost of climate impacts and
explains how to compare these to the costs of adaptation measures.
Appropriate Use The proposed method is flexible enough to be applied across a wide range of scales from broad
aggregated impacts on a sub-national region to well-defined disaggregated impacts on a
particular receptor. The guidance is provided through two reports (Overview Report and
Implementation Report), a series of case studies and a web-based spreadsheet tool (limited in
terms of sectors and impacts scope). The Overview Report, including a specific set of case
studies, is designed to provide guidance to the non-economists who need to commission and
interpret costing studies, whereas the more detailed Implementation Report is aimed at
providing guidance for economists who need to undertake these studies.
Scope The guidance has been specifically developed for use within the UK, but could be further
developed to work elsewhere. This would necessitate the development of costing matrices for
the direct and knock-on effects of the identified impacts. The web-based spreadsheet tool has
also been specifically developed for use with in the UK. The principles and concepts of the
methodology are transferable and can provide a framework for broader application. Sectors
specifically supported through the provision of impact matrices include coastal zones, water
resources, agriculture, and buildings and infrastructure. Impacts on non-market goods or
services are difficult to value, and so the guidance includes individual guidance for valuing the
impacts on habitat and biodiversity, human health, recreation and amenity, cultural objects,
leisure and working time, and non-use benefits.
Key Output Specifically identified physical impacts are converted into monetary values and then, after
calculating the resource costs of adaptation options, information is available to support the
weighing up of the costs and benefits of the adaptation options towards choosing the preferred
option. This assessment of adaptation options is seen to take place within a risk assessment
framework that accounts for the risks and uncertainty (e.g., UKCIP risk framework).
Key Input Inputs include identifying and measuring (quantifying) climate impacts in physical units (e.g.,
through a climate impact assessment); impact valuations matrices that allow for the
identification of costs/unit of direct impacts of climate change and knock-on (higher-order)
effects. This includes both market price data that should be readily available. Also required
are the values associated with impacts on non-market goods or services which result from
conducting primary valuation studies. Also required are the costs of adaptation options such as
those required to support a cost-benefit analysis.
Ease of Use The guidance, including the web-based spreadsheet version and case studies does provide the
non-economist with the ability to obtain a preliminary understanding of the potential costs. It
is intended, however, for an economist to undertake a more comprehensive assessment of the
costs for a particular concern.
Training Required Training is required, including using this guidance in conjunction with a risk assessment
procedure (e.g., UKCIP risk framework). For a more detailed analysis it is essential that an
experienced economist be involved.
Training Available Training is not available at this time. The guidance and availability of case studies and the
web-based spreadsheet version of the tool do provide a limited learning environment.
Computer The costing reports, case studies and web-based spreadsheet version are all available from the
Requirements UKCIP website and are accessible using any web browser software. The web-based
spreadsheet costing tool requires Microsoft Excel.
Documentation The costing reports, case studies and web-based spreadsheet version are all available from the
UKCIP website (www.ukcip.org.uk/resources).
Page 3-42
Costing the Impacts of Climate Change in the UK (cont.)
Applications Case studies included with the report include: agriculture: the cost of not meeting irrigation
needs; transport disruption: the cost of time lost due to short-term disruptions; water resources:
the cost of increasingly stringent effluent standards; and flooding: the cost of flood alleviation.
Contacts for Tools, Roger Street, Technical Director, UK Climate Impacts Programme; e-mail:
Documentation, roger.street@ukcip.org.uk or through enquiries at: enquiries@ukcip.org.uk; or Alistair Hunt,
Technical Metroeconomica Limited.
Assistance
Cost There is no charge for access to this guidance. It is expected that users of this guidance (and
all UKCIP tools) would provide feedback to UKCIP regarding the overall results, as well as
comments and suggestions towards improving the guidance. Enhancing the scope of the
guidance or developing it for use outside of the UK will necessitate developing the various
matrices and costs information, including through primary valuation studies which could be
relatively costly depending on the scope and ease of availability of the costing information.
References Included with the guidance are case studies that demonstrate the use of the costing guidance.
Metroeconomica carried out a study of the costs and benefits of climate change associated with
different sectors. This is one of the first studies to apply costing methods to sectors on a
microscale. Details of this and other cross-regional studies are available on the Defra website
at www.defra.gov.uk/environment/climatechange/uk/adapt/research.htm.
Final reports are available through the Defra research pages at
www2.defra.gov.uk/research/project_data/default.asp (search by "cross regional").
Page 3-43
Description Guidance on the identification and selection of adaptation options that can be used to respond
to climate risks.
Appropriate Use The guidance note is aimed at supporting decision and policy makers who are faced with
identifying and appraising the selection and implementation of adaptation measures that
address identified climate risks. It is intended to be used as a companion piece to other UKCIP
tools such as the Adaptation Wizard; Risk, Uncertainty and Decision-Making Framework;
Business Areas Climate Impacts Assessment Tool (BACLIAT), Adaptation Actions database,
and the guidance on costing the impacts of climate change.
Scope The guidance note explores adaptation options relating them to their intended purpose -
Building Adaptive Capacity or Delivering Adaptation Actions. It also considers the options in
the context of strategic intentions - living with and bearing losses or risks, preventing effects or
reducing exposure to risks, sharing responsibility for any losses or risks, or exploiting
opportunities. Each of these is further explored through generic examples with real-world
specific examples provided.
Key Output The intention is that after reading this guidance note, decision and policy makers will have the
information that will allow them to identify an appropriate set of adaptation options using the
other UKCIP tools and guidance.
Key Input None required.
Ease of Use The note is targeted for users and has both generic and real-world examples of adaptation
options.
Computer The guidance note is available from the UKCIP website and is accessible using any web
Requirements browser software.
Documentation This guidance note is available at www.ukcip.org.uk/resources/tools/adaptationoptions.asp.
Applications None.
Contacts for Tools, Roger Street, Technical Director, UK Climate Impacts Programme; e-mail:
Documentation, roger.street@ukcip.org.uk or through enquiries at: enquiries@ukcip.org.uk.
Technical
Assistance
Cost There is no charge for access to this guidance. It is expected that users of this guidance (and
all UKCIP tools) will provide feedback to UKCIP regarding the overall results, as well as
comments and suggestions towards improving the guidance.
References None.
Page 3-44
Description The Wizard is a tool to help users adapt to climate change. It is a generic, high-level tool that
can be used to raise awareness of the adaptation process, and help those who are preparing to
adapt. It is more a decision-support than decision-making tool.
Appropriate Use The Wizard can help users to:
• Teach themselves, their colleagues and wider professional network about climate
change impacts and adaptation.
• Access the information, tools and resources UKCIP provides to help them deal with
climate change.
• Assess their vulnerability to current climate and future climate change.
• Make a decision, or develop a project, programme, policy or strategy, that is resilient
to climate change.
• Develop a climate change adaptation strategy
The Wizard will not produce a tailor-made climate adaptation strategy at the click of a button.
Instead, it will help users generate the information they need to prepare their own adaptation
strategy.
Scope The audience for the Wizard is decision-makers in organizations. It has been developed as a
generic tool that can be tailored for the particular application of the user.
Key Output An adaptation strategy document that includes: a record of the users’ vulnerability to current
climatic variability; a prioritized list of climate risks; a list of possible adaptation measures to
address those risks; adaptation options appraisal; and an implementation strategy.
Key Input • Time to complete the process
• Participation of relevant individuals from within and outside of the organization
concerned
• An understanding of how decisions are made within the users’ organization and how
to bring about change
• In-house experience and evidence of the consequences of past weather events on the
organization or activity
• Climate change scenario information
• Socio-economic scenario information
• Tools or techniques for costing climate impacts and for costing and evaluating
adaptation options
Ease of Use The Wizard is accessible and easy to use.
Training Required No specific training is required. However, awareness of climate change scenarios and risk
assessment methods would be helpful. Specialist skills may be required to complete specific
tasks, such as costing climate impacts and adaptation options, and conducting a quantitative
risk assessment. These activities can be commissioned separately if necessary and the results
incorporated into the process.
Training Available UKCIP can offer support and advice on application of the Wizard. The level of support
available will depend on uptake of the tool.
Computer The wizard is web-based and can run using any web browser software. Adobe Acrobat is
Requirements needed to display some of the tables and most of the reports referred to in the Wizard as
sources of information. Microsoft Word would be useful to compile the resulting adaptation
strategy document, but any another word processing package would suffice. Should the
UKCIP costings tool be used to cost impacts and adaptation options, Microsoft Excel would be
required.
Page 3-45
UKCIP Adaptation Wizard (cont.)
Documentation All documentation is contained within the Wizard’s website.
Applications The prototype version of the Wizard was used to inform the development of a new school in
Worcestershire, United Kingdom. This case study is available from the Wizard’s website.
Further case studies are being developed.
Contacts for Tools, Megan Gawith, Scientific Officer, UK Climate Impacts Programme; e-mail:
Documentation, megan.gawith@ukcip.org.uk.
Technical
Assistance
Cost There is no charge for using the Wizard. The process of completing the Wizard will, however,
incur some costs, the scale of which will be determined by the nature of the application. Costs
would arise from, amongst other things: staff time to complete the process, possible associated
travel and meeting costs, commissioning further research to fill information gaps where
necessary, implementing adaptations.
References The Wizard is based on the report: Willows, R.I. and R.K. Connell. (eds.). 2003. Climate
Adaptation: Risk, Uncertainty and Decision-Making. UKCIP Technical Report. UKCIP,
Oxford.
Page 3-46
Adaptation Actions
Description An online searchable database that has been developed and is maintained by UKCIP staff.
Adaptation Actions contains examples of activities people in the UK have undertaken to
exploit the opportunities that climate change might provide or to adapt to the risks of our
changing climate. The database only includes examples of activities that have actually been
implemented and does not include adaptation activities that are "a good idea". Users can
search the database to see what others have done to adapt and get ideas on how to adapt to
reduce their climate risks or exploit opportunities.
Appropriate Use To stimulate thinking on the types of actions that could be taken to adapt to climate change.
Note that this is not a definitive list, and the adaptation actions included in the database have
not been validated or endorsed by UKCIP.
Scope Includes mostly UK but some international actions.
Key Output Information on examples of different types of adaptation actions.
Key Input A user-specified sector or searchable field.
Ease of Use Extremely easy to use.
Computer Access to the internet.
Requirements
Documentation All documentation is provided within the database.
Applications A prompt to identifying adaptation options.
Contacts for Tools, Jacquie Yeates, Scientific Officer, UKCIP; e-mail: jacquelyn.yeates@ukcip.org.uk.
Documentation,
Technical
Assistance
Cost None.
References None.
Page 3-47
Description The UKCIP Business Areas Climate Impacts Assessment Tool (BACLIAT) is a starting point
for exploring the implications of climate change on a particular organization or sector. It
comprises a simple checklist for assessing the potential impacts of climate change under the
following generic headings: logistics, finance, markets, process, people, premises and
management implications.
Appropriate Use BACLIAT can be used by an individual but is of most value when used as the basis of a
brainstorming exercise with a group of relevant managers or representatives from the
organization or sector in question. It can also be used in more general awareness-raising
workshops to illustrate the breadth of impacts that climate change could have.
Scope BACLIAT can be used at the level of a single organization or an entire industrial sector. It
encourages the consideration of both threats and opportunities. Although it was designed for
use by a business or sector, it can be used for other non-commercial organizations.
Key Output A long list of potential impacts of climate change on an organization or sector.
Key Input • A reasonable knowledge of all aspects of the organization or sector.
• The headline messages from UKCIP climate change scenarios.
• A short amount of time.
Ease of Use BACLIAT is accessible and easy to use.
Training Available UKCIP can facilitate BACLIAT workshops where appropriate and where resources permit.
Computer None.
Requirements
Documentation A Changing Climate for Business is available free of charge from UKCIP either electronically
or as a paper publication.
Applications BACLIAT has been used by several UK trade associations and professional bodies as well as
individual companies including Serco's Colnbrook Immigration Centre at Heathrow, Scottish
Electrical Contracting, and several small and medium-sized enterprises.
Contacts for Tools, Kay Johnstone, Project Officer (Business), UK Climate Impacts Programme; e-mail:
Documentation, kay.johnstone@ukcip.org.uk.
Technical
Assistance
Cost There is no charge for using BACLIAT. The only cost is the time taken to go through the
process, which normally takes between one and three hours.
References Metcalf, G. and K. Jenkinson. 2005. A Changing Climate for Business, UKCIP.
Page 3-48
Description Website providing support to local authorities drawing up Action Plans to tackle climate
change. It is structured into five project management stages with council roles divided into:
corporate functions; service provider and community leader, and covers both adaptation and
mitigation.
Appropriate Use It is primarily intended to provide guidance to English local authorities drawing up Climate
Change Action Plans in accordance with the commitments of signatories to the Nottingham
Declaration but could also be of use to any public sector organizations wishing to respond to
the challenges of climate change.
The adaptation threads of the tool are based on the UKCIP risk framework methodology
modified to suit the requirements of UK local authorities.
Scope The tool is designed for use by all types of English local authorities: district, unitary and
county, but could potentially be of use at regional or sub-regional scales.
Key Output A practical Climate Change Action Plan -- NDAP provides a framework for the production of
a comprehensive action plan for a local authority area covering both climate change mitigation
and adaptation. However, it is structured to allow selective use to cover only specific areas of
local authority operations.
Key Input NDAP encourages local authorities to identify their local climate risks and vulnerabilities
through the use of UKCIP scenarios and the drawing up of a Local Climate Impacts Profile
(LCLIP) based on recent local exposure to weather events.
Ease of Use NDAP provides basic guidance for local authority officers to draw up a Climate Change
Action Plan. It is intended to be easy to use and to require little, or no, specialist technical
knowledge.
Training Required NDAP is intended to be sufficiently easy to use that it does not require any specific training
(see below).
Training Available Regional training events were organized following the launch of NDAP version 1 in July 2006.
These were focused on some of the basic principles of climate risk impact assessment and
adaptation. Currently there is no training available, but this is kept under review.
Computer Any system with web access.
Requirements
Documentation No documentation beyond the website itself.
Applications NDAP is currently being used by a number of English local authorities to produce Climate
Change Action Plans.
Contacts for Tools, Laurie Newton, Local Authority Project Manager, UKCIP; e-mail:
Documentation, laurie.newton@ukcip.org.uk.
Technical
Assistance
Cost Free.
References See www.nottinghamdeclaration.org.uk.
Page 3-49
Community-based Risk Screening Tool – Adaptation & Livelihoods (CRiSTAL)
Description IUCN, IISD, SEI-US and Intercooperation have developed and tested a project planning and
management tool called CRiSTAL (Community-based Risk Screening Tool – Adaptation &
Livelihoods). The tool seeks to help project planners and managers to integrate risk reduction
and climate change adaptation into community-level projects. CRiSTAL was developed in
response to the outcomes of Phase 1 of the Livelihoods and Climate Change project, which
examined how ecosystem management and restoration (EM&R) or sustainable livelihoods
(SL) projects reduced community vulnerability to climate stress.
Appropriate Use CRiSTAL can be used by local communities, project planners and project managers.
Scope CRiSTAL is intended to promote the integration of risk reduction and climate change
adaptation into community-level projects. By focusing on community-level projects,
CRiSTAL promotes the development of adaptation strategies based on local conditions,
strengths and needs.
Key Output List of project activities that protect/enhance access to and availability of resources that are
strongly affected by climate hazards or important to coping.
Key Input Relevant (regional, national, eco-zone) information on climate change (if available/accessible),
as well as information on local climate hazards, impacts, coping strategies, as well as
livelihood resources, and project information.
Ease of Use User-friendly.
Training Required Training shouldn't be required to use CRiSTAL, as there is a User's Manual available.
Training Available Training is currently being provided. A training session was held in Mozambique earlier this
year for project planners and managers based in Eastern and Southern Africa, and preparations
are currently underway for a West Africa version of the training. More is planned for 2008.
Computer The self-extracting CRiSTAL file can be downloaded from http://www.sei-
Requirements us.org/Cristal/Cristal_Setup.exe. If you run this file, the program (and all related files) should
be installed on your C: drive in a folder you create named, “CRISTAL”. In order to run the
program, you simply open the "Session-Setup.xls" file in the CRISTAL folder. You should
also make sure your security settings in Excel are set on medium in order to enable the macros
to run. This can be done by accessing the Tools menu, then clicking on Options > Security >
Macro Security.
Documentation CRiSTAL tool, field reports and presentations available at:
http://www.iisd.org/security/es/resilience/climate_phase2.asp .
Applications In an effort to render this tool as useful as possible, IUCN, IISD, SEI-US and Intercooperation
conducted a series of field tests on planned or ongoing natural resource management projects
in Mali, Bangladesh, Tanzania, Nicaragua and Sri Lanka. Project team members travelled to
the field sites to work with local project managers and community stakeholders in gathering
relevant information, applying the tool and developing recommendations on how to adjust
project activities so they take into account local adaptive capacity.
Results from the field tests provided constructive feedback on the design and application of
CRiSTAL, while the testing process itself has raised awareness of climate change issues in
vulnerable communities. The tool provided an entry point for discussing local observations of
climate variability and the impacts of climate change in a participatory manner, encouraging
communities to look for opportunities to enhance their adaptive capacities. For project
planners and managers, CRiSTAL provided a useful framework for understanding the links
among climate, livelihoods and project activities.
Page 3-50
Community-based Risk Screening Tool – Adaptation & Livelihoods (CRiSTAL) (cont.)
Contacts for Tools, Anne Hammill, Livelihoods and Climate Change Project Manager, International Institute for
Documentation, Sustainable Development (IISD); e-mail:ahammill@iisd.org.
Technical
Assistance
Cost Free.
References None.
Page 3-51
3.3 Stakeholder Approaches
Stakeholder approaches in general emphasize the importance of ensuring that the decisions to be
analyzed, how they are analyzed, and the actions taken as a result of this analysis are driven by
those who are affected by climate change and those who would be involved in the
implementation of adaptations. The stakeholder approaches described in this compendium, listed
in Table 3.3, represent a way of analyzing the institutional and organizational context of the
adaptation strategy planning process more than they do specific tools to be applied to an
assessment. Application of the stakeholder network and institution approach might well employ
a variety of tools, some of which are listed below. The vulnerability indices approach aims to
provide the user with a metric for vulnerability and adaptive capacity, but again, its application
would most likely rely on other tools. Agent based social simulation is a modeling approach to
stakeholder networks and institutions and might in practice take different forms, depending on
the user’s aims. Livelihood sensitivity exercise is a means of integrating existing knowledge of
climate vulnerability with livelihood analysis. Multistakeholder processes are tools emphasizing
dialogue on consensus building, and might well be employed as part of the aforementioned
approaches. Scoping, which can be used as the first step of a vulnerability and adaptation
assessment, allows users to identify tools and approaches that might be applicable to their
particular focus. Global sustainability scenarios can provide insight into future vulnerability and
adaptive capacity and their associated quantitative indices might typically serve as an input for
other approaches described in this section. The Model of Private Proactive Adaptation to Climate
Change (MPPACC) is an analytical tool, which helps to understand the psychological
determinants of individual adaptation behaviour. Many of these approaches are relatively new, at
least in their application to the climate change problem, and consequently their methods are still
being refined.
Table 3.3 Stakeholder approaches

Scoping
MPPACC (Model of Private Proactive Adaptation to
Climate Change)
Page 3-52
Description The stakeholder networks and institutions approach focuses on understanding those who make
the decisions and how they relate to one another. Building adaptive capacity over long time
scales depends on understanding these relationships. Institutions can be viewed as the
collective rules, norms, and shared strategies that define stakeholder behavior. This approach
posits that understanding present capacity is key to predicting how it is likely to evolve in
response to future risks. These relationships can be complex, and unraveling them can require
the use of a number of tools (see below). Each stakeholder has different objectives, resources,
and responsibilities, all of which must be investigated. Some stakeholders may have little
voice in the process or may be assigned responsibilities in only part of the issue. New
stakeholders may emerge and relationships may alter, particularly in a crisis.
Appropriate Use Useful in determining the present adaptive capacity and how that capacity might be developed
in the future. In general stakeholder approaches are oriented toward research teams that
support policy making. They help set the framework for evaluating specific measures, and thus
from an early part of the decision process, as well as helping to monitor capability over a
longer term.
Scope Global, but most appropriate at national or local level.
Key Output Characterization of stakeholders and institutions in terms of levels of participation, positions,
and boundaries in policy making. Insight into institutional capacity to adapt.
Key Input A mixture of quantitative and qualitative data depending on actual tools employed in the
approach.
Ease of Use Varies, but application of some tools requires specialist training in policy analysis. Some can
be readily adopted by practitioners.
Training Required Some training is useful, but expertise in policy analysis is more important than specific
analytical techniques.
Training Available Many training courses on stakeholder engagement exist.
Computer Varies.
Requirements
Documentation Working papers on institutions, institutional analysis, stakeholders, and case studies are
available online.
Applications See http://www.sei.se/oxford / for examples of applications.
Contacts for Dr. Thomas Downing, Stockholm Environment Institute, Oxford Office, 10B Littlegate Street,
Framework, Oxford, OX1 1QT, United Kingdom; Tel: +44.1865.202070; e-mail: tom.downing@sei.se.
Documentation,
Technical
Assistance
Cost No cost.
Page 3-53
Stakeholder Networks and Institutions (cont.)
References See http://www.sei.se/oxford/ for links to references.
Ziervogel, G. and T. E. Downing. 2004. Stakeholder networks: Improving seasonal forecasts.
Climatic Change 65(1-2):73-101.
Page 3-54
Scoping
Description A major step in designing an assessment of climate impacts, vulnerability, and adaptation is to
scope the elements of the study. A spreadsheet has been developed to aid project teams in the
scoping phase. The spreadsheet has a list of potential methods — over 70 general techniques
that are appropriate in various stages of an assessment. A simple form allows users to choose
answers to eight scoping questions. The answers are then used to screen the choice of
potentially useful tools. A section of the spreadsheet has common flowcharts of projects (e.g.,
NAPA and APF) and a set of building blocks that users can link to make their own project
diagram.
Appropriate Use This tool can underpin a project design team or be used to backstop a participatory exercise
where teams are required to prepare a poster of their project and explain the overall logic and
steps to other teams.
Scope Global.
Key Output Project design and inventory of tools.
Key Input Review and synthesis existing information on vulnerability and adaptation, existing
development policies and priorities, adaptation needs and constraints, and a list of potential
methods.
Ease of Use Very simple, all data are in the spreadsheet if users wish to change any assumption.
Training Required None necessary.
Training available SEI has used this tool to backstop participatory design exercises.
Computer PC Windows with Excel (macro functions work with more recent versions).
Requirements
Documentation Contained in the spreadsheet; see also the APF scoping technical paper (TP1).
(http://ncsp.undp.org/report_detail.cfm?Projectid=151)
Applications Flexible use in project design.
Framework, Oxford, OX1 1QT, United Kingdom; Tel: +44.1865.202070;
Documentation, e-mail: tom.downing@sei.se.
Technical
Assistance
Cost Free, available on the www.vulnerabilitynet.org web site.
References Downing, T.E. 2003. Scoping Tool for Climate Change Assessment: An Excel Spreadsheet and
Toolkit. Stockholm Environment Institute, Oxford, UK.
Page 3-55
Description Formal vulnerability indices can be helpful as part of an adaptation strategy. Vulnerability is
defined by the IPCC as the combination of sensitivity to climatic variations, the probability of
adverse climate change, and adaptive capacity. For each of these components of vulnerability,
formal indices can be constructed and combined. Methods of aggregating across sectors and
scales have been developed in other contexts (e.g., the Human Development Index) and are
beginning to be applied to climate change. However, substantial methodological challenges
remain — in particular estimating the risk of adverse climate change impacts and interpreting
relative vulnerability across diverse situations.
Appropriate Use They can help identify and target vulnerable regions, sectors or populations, raise awareness,
and can contribute to a monitoring strategy. In general stakeholder approaches are oriented
toward research teams that support policy making. They help set the framework for evaluating
specific measures, and thus from an early part of the decision process, as well as helping to
monitor capability over a longer term.
Key Output Matrices of vulnerability indexes, vulnerability maps.
Key Input A mixture of quantitative and qualitative data depending on actual tools employed in the
approach. Examples of vulnerability indices are commonly available, including the Southeast
Asia Environmental Framework (contact Vikrom Mathur at the SEI: www.sei.se) and food
security scenarios for South Africa and India (contact Tom Downing at the SEI).
Ease of Use Varies, but application of some tools requires specialist training in policy analysis. Some can be
readily adopted by practitioners.
analytical techniques.
Training Available A number of groups offer training in vulnerability assessment particularly related to disasters.
The Vulnerability Network led by the SEI maintains a web site with discussion forums, a
document hotel, and bibliographies: see www.vulnerabilitynet.org.
Computer Varies.
Requirements
Documentation UNEP has sponsored a project to review formal vulnerability indices and a background paper
has been prepared. A summary of the key issues is available as a PowerPoint presentation on the
ECI website (see publications at http://www.eci.ox.ac.uk/). See also the Technical Paper 3 of the
Adaptation Policy Framework at http://ncsp.undp.org/report_detail.cfm?Projectid=151.
Applications Vulnerability indices have been used by the Bangladesh Centre for Advanced Studies in Dhaka,
South Pacific Applied Geoscience Commission, Association of Small Island States, and Battelle
Pacific Northwest Laboratory. The Potsdam Institute for Climate Impact Research has
developed an analogous approach on environmental syndromes.
Framework, Oxford, OX1 1QT, United Kingdom; Tel: +.44.1865.202070, e-mail: tom.downing@sei.se.
Documentation, Dr. Antoinette Brenkert, Pacific Northwest National Laboratory, Joint Global Change Research
Technical Institute at the University of Maryland, 8400 Baltimore Avenue, Suite 201, College Park, MD
Assistance 20740-2496, USA; Tel: +1.301.314.6759; Fax: +1.301.314.6760;
e-mail: Antoinette.Brenkert@pnl.gov.
Page 3-56
Vulnerability Indices (cont.)
Cost No cost.
References Downing, T. et al. 2001. Vulnerability indices. Climate Change Impacts and Adaptation. UNEP,
Policy Series 3: 91 pp. (available at http://www.sei.e-
collaboration.co.uk/OPMS/view.php?site=seiproject&bn=seiproject_hotel&key=1097073874)
Page 3-57
Description A computer assisted technique for knowledge elicitation assists in building rules of how people
respond to a variety of stimuli and scenarios of environmental and social conditions. Agent
based social simulation is a relatively formal approach to stakeholder and institutional analysis.
It is a computer programming method that uses software agents to represent the positions,
boundaries, and actions of stakeholders. This approach is one of the few means to realistically
simulate the behavior of stakeholder networks in the context of the rules, norms, and shared
strategies from social and economic institutions. This approach can be applied at various stages
of an assessment. One example is that agent based social simulation can incorporate
socioeconomic scenarios that are constructed as sets of rules regarding, for example,
environmental values, regulation, and economic goals. An advantage of this approach is that the
realization of socioeconomic scenarios is the outcome of stakeholder behavior rather than being
exogenously imposed in a way that bears little relation to actual decision making processes.
Appropriate Use Applicable to various stages of the design of a strategy to respond to climate change and its
subsequent implementation in specific measures.
Key Output Insight into how the decision making and implementation processes. For example, realistic
socioeconomic pathways constructed as the outcome of multiple decisions.
Key Input A mixture of qualitative and quantitative data.
Ease of Use Varies, though constructing an agent based social simulation model would require significant
expertise.
analytical techniques when it comes to using and interpreting results of agent based social
simulation.
Training Available Very little experience has been gained regarding these approaches to date, and hence no formal
training or certification is available. However, occasional workshops are offered. See
documentation section below.
Requirements
Documentation Center for Policy Modeling at Manchester Metropolitan University is one of the world leaders
in agent based social simulation. The CPM developed a user friendly software package (SDML)
to facilitate model development. http://cfpm.org/.
Applications Agent based social simulation is only beginning to be applied to climate change. Oxford
University’s Environmental Change Unit is collaborating with the CPM on various applications
to integrated assessment of climate policy. Also, the Carnegie Mellon global change program
has elements of agent behavior in the Integrated Climate Assessment Model. A European Union
project on integrated water resource management (Freshwater Integrated Resource Management
Agents, coordinated by the University of Surrey) will develop agent based approaches further.
Documentation,
Technical
Assistance
Page 3-58
Agent Based Social Simulation (cont.)
Cost No cost.
References West, J.J. and H. Dowlatabadi. 1999. On assessing the economic impacts of sea-level rise on
developed coasts. In Climate Change and Risk, T.E. Downing, A.A. Olsthoorn, and R.S.J. Tol
(eds.). Routledge, New York, pp. 205-220.
Ziervogel, G., M. Bithell, R. Washington and T. Downing. 2005. Agent-based social simulation:
a method for assessing the impact of seasonal climate forecast applications among smallholder
farmers. Agricultural Systems 83(1):1-26.
Page 3-59
Description Livelihood sensitivity mapping exercise is a means of integrating existing knowledge of climate
vulnerability with livelihood analysis. It commonly involves stakeholder participation. Initially
the exercise can be conducted in the context of rapid workshop breakout group, but eventually
can be formalized via the inclusion of expert analysis, impact models, or historical analogues:
The exercise involves developing a matrix with three blocks of rows — beginning with
ecosystem services (e.g., soil moisture), then livelihood activities (such as crop production) and
finally a synthesis based on livelihoods themselves. Climatic stresses (e.g., drought) are listed as
columns. Users then fill in the cells — rating the sensitivity of ecosystem services, activities and
livelihoods to a range of hazards and stresses. Exposure across the hazards and impacts across
the services/activities/livelihoods can be calculated as aggregated indices.
Appropriate Use Livelihood sensitivity exercise is a useful tool for helping identify vulnerable livelihoods and
consequently targeting adaptations that aim to increase the resiliency of particular livelihood
strategies to climate change. Livelihood sensitivity exercise is best applied to a single sector or
region at any one time. The approach has been used in regional training workshops for the
NAPA teams.
Scope All sectors. Most applicable at a local or regional level.
Key Output Ranking of vulnerable livelihoods as well as an overall livelihood sensitivity index.
Key Input Qualitative assessments of sensitivity of livelihoods to climatic threats.
Ease of Use Easy.
Training Required A familiarity with livelihoods, expert knowledge elicitation, and vulnerability indicators is
helpful.
Training Available The NAPA workshops have produced a range of presentations and a sample spreadsheet that are
available at http://www.unitar.org/ccp/ and www.vulnerabilitynet.org. The spreadsheet includes
notes on delineation of livelihoods and an illustrative example based on agriculture in southern
Africa.
Computer Minimal to none.
Requirements
Documentation Available at www.vulnerabilitynet.org.
Applications See www.livelihood.org.
Documentation,
Technical
Assistance
Cost Free.
References See www.livelihood.org.
Downing, T.E. 2003. Livelihood Sensitivity to Climatic Hazards. Annex to Technical Paper 3 of
the Adaptation Planning Framework. SEI, Oxford, UK.
(http://ncsp.undp.org/report_detail.cfm?Projectid=151)
Page 3-60
Description The aim of multistakeholder processes are to promote better decision making by ensuring that
the views of the main actors concerned about a particular decision are heard and integrated at all
stages through dialogue and consensus building. The process takes the view that everyone
involved in the process has a valid view and relevant knowledge and experience to bring to the
decision making. The approach aims to create trust between the actors and solutions that
provide mutual benefits (win-win). The approach is people-centered and everyone involved
takes responsibility for the outcome. Because of the inclusive and participatory approaches
used, stakeholders have a greater sense of ownership for decisions made. They are thus more
likely to comply with them.
Appropriate Use For decisions that require cooperation between many different stakeholders, where a decision
made by one group alone might not be complied with by the other groups. They are suitable for
situations where dialogue between the different actors is possible and there is willingness to
listen to and learn from others to reconcile different interests and reach consensus solutions.
There is no one set approach. The exact nature of a given process will depend on the issues to be
covered, the specific objectives, the expertise available, the participants, and the time and other
resources available.
Scope Global, national, and local. Can be used with a wide range of structures and levels of
engagement.
Key Output Transparent and inclusive decision making, strengthened stakeholder networks.
Key Input Expertise in facilitation, willingness of participants to learn, time to allow trust building,
quantitative and qualitative information (depending on tools used), participation of key actors.
Ease of Use The approaches as well as the techniques used are based on common sense. Good planning is a
vital part of ensuring a successful outcome and time must be allowed for the design stage of the
process.
Training Required There are a number of good texts available, but additional appropriate training would be
beneficial (depending on time, resources, type of process). Need also to design the process to fit
the specific needs and circumstances.
Training Available This is still a new and evolving field. Much experience of using participatory processes at the
local level is available but less at national and global levels. Some guidance on approaches is
available (see Applications below for examples).
Computer Depends on the process.
Requirements
Documentation For information about running stakeholder engagement processes: Multistakeholder processes
for governance and sustainability, Minu Hemmati, (2002), Earthscan, London.
http://www.earthscan.co.uk/.
Applications Multistakeholder processes have been used in the Aarhus Convention Process, the Bejing+5
Global Forum Online discussions, United Nations sustainable development multistakeholder
dialogue, the Environment Council/Shell — Brent Spar Project (see Hemmati above for more
information on these) and the Adaptation Policy Framework (APF)
(http://ncsp.undp.org/report_detail.cfm?Projectid=151).
Page 3-61
Multistakeholder Processes (cont.)
Contacts for Dr. Kate Lonsdale, Stockholm Environment Institute, Oxford, OX1 1QT;
Framework, e-mail: kate.lonsdale@sei.se.
Documentation, Dr. Bo Lim, Chief Technical Advisor, National Communications Support Programme, UNDP-
Technical GEF, Room 1607, 304 East 45th St, NY 10017, USA; e-mail: bo.lim@undp.org.
Assistance
Cost Depends on the scale of the process.
References Chambers, R. 2002. Participatory Workshops: A Source Book of 21 Sets of Ideas and Activities.
Earthscan. Available from http://www.earthscan.co.uk/. Good source book of information about
how to run workshops including lots of practical advice and common mistakes.
Coalition for Agrarian Reform and Rural Development (ANGOC) and International Institute of
Rural Reconstruction (IIRR). 2001. Enhancing Ownership and Sustainability: A Resource Book
on Participation. International Fund for Agricultural Development (IFAD). e-mail:
publications@iirr.org. A collection of short reviews of participatory approaches and
experiences.
Pretty, J.N., I. Guijt, I. Scoones and J. Thompson. 1995. Participatory Learning and Action: A
Trainers Guide. International Institute for Environment and Development (IIED). Available
from www.earthprint.com. A valuable collection of advice, tips, and methods for participatory
approaches. The focus is mostly on participatory rural appraisal but much would also be
relevant to APF workshops.
Kaner, S., L. Lind, C. Toldi, S. Fisk and D. Berger. 1996. Facilitator’s Guide to Participatory
Decision-Making. New Society Publishers. An introduction to how to build consensus and make
sustainable agreements with groups. Also gives advice on how to handle difficult group
dynamics and individuals.
Page 3-62
Description Scenarios of future vulnerability are poorly framed by existing scenarios developed for
bracketing future greenhouse gas emissions. Alternative scenarios of sustainability have been
developed in various forms, and these correspond to many of the conditions of vulnerability and
adaptive capacity that are of concern to development planners and practitioners. A major suite
of sustainability scenarios was developed by the Global Scenarios Group (GSG). These include
a conventional wisdom of market forces, a world of increasing degradation and
impoverishment, and a sustainability transition. They are similar to scenarios developed for the
UNEP Geo assessment. The GSG suite of scenarios includes storylines and quantified indicators
for major world regions using the PoleStar scenario tool developed by SEI-Boston.
Appropriate Use The GSG and PoleStar data can be used to frame national or local scenarios of vulnerability, or
to place national development scenarios in context.
Scope Global to regional; with some extensions they can be used to frame more local scenarios.
Key Output Quantitative indicators of environmental change, economic conditions, and social welfare that
can be linked to climatic vulnerability.
Key Input The storylines and overview are described in an SEI monograph, Great Transitions (see
References below).
Ease of Use Very little effort is required to appreciate the storylines. PoleStar is not a simple model to
understand, although it is well documented. It may take several days to extract the quantitative
data and format for specific purposes; it is possible to create new subregions within PoleStar,
but that will require additional time and possibly training.
Training Required None necessary, although further training in PoleStar may be warranted.
Training available SEI has used this tool in many contexts — contact SEI-Boston for training in PoleStar and the
GSG scenarios; SEI Oxford has developed explicit links to climate vulnerability using South
Africa and India as examples.
Computer PC Windows.
Requirements
Documentation GSG web site, monograph and PoleStar software and manual are available through the SEI
Boston office: see www.sei.se.
Applications Global to local socioeconomic scenarios of future climate vulnerability and adaptive capacity.
Contacts for Paul Raskin, SEI-Boston for the GSG and PoleStar, 11 Arlington Street, Boston, MA 02116-
Framework, 3411, USA; Tel: +1.617.266.8090; e-mail: praskin@tellus.org.
Documentation, For application to climate change: Dr. Thomas Downing, Stockholm Environment Institute,
Technical Oxford Office, 10B Littlegate Street, Oxford, OX1 1QT, United Kingdom;
Assistance Tel: +44.1865.202070; e-mail: tom.downing@sei.se.
Cost PoleStar is available for free in a demonstration version, which includes the GSG scenarios. The
GSG monograph is available free in an electronic version.
References P. Raskin, et al. 2002. Great Transition. Stockholm Environment Institute, Boston.
http://www.tellus.org/seib/publications/Great_Transitions.pdf
Page 3-63
MPPACC (Model of Private Proactive Adaptation to Climate Change)
Description The Model of Private Proactive Adaptation to Climate Change (MPPACC) is a psychological
model, which helps to understand the psychological determinants of individual adaptation
behavior. MPPACC separates out the psychological steps to taking action in response to
climate change, and allows one to see where the most important bottlenecks occur—including
risk perception and perceived adaptive capacity.
Appropriate Use MPPACC mainly qualifies as a theoretical model, which helps to address the important
determinants of individual adaptive behavior in campaigns that have the objective to foster
individual adaptation behavior. In taking actions to promote particular adaptations, it would be
worthwhile for policy makers to focus on the cognitive barriers mentioned in MPPACC.
In addition, MPPACC can offer predictive power to the task of assessing individual adaptive
capacity (i.e., the probability of individual adaptation behavior) by measuring the
psychological determinants of adaptation behavior through surveys (e.g., by asking people for
their perceived ability to avoid damage from climate change impacts).
MPPACC is not a tool to assess climate change impacts or vulnerability.

Scope MPPACC can be applied worldwide, but individual determinants of adaptation behavior vary
from culture to culture. Therefore, in most cases MPPACC has to be checked for cultural
adequacy.
Key Output MPPACC is an analytical tool to understand the determinants of individual adaptation
behavior.
Key Input When MPPACC is used as a theoretical tool to understand the determinants of individual
adaptation behavior there are no data required.
Ease of Use Every user who can think psychologically can use the MPPACC.
Training Required No training is required.
Training Available No training is required.
Computer None.
Requirements
Documentation Grothmann, T. and A. Patt. 2005. Adaptive Capacity and Human Cognition: The Process of
Individual Adaptation to Climate Change. Global Environmental Change 15 (3):199-213.
Applications No further cases or projects where MPPACC has been applied despite the project presented in
Grothmann and Patt (2005).
Contacts for Tools, Torsten Grothmann; e-mail: Torsten.Grothmann@web.de.
Documentation,
Technical
Assistance
Cost None.
References Grothmann, T. and A. Patt. 2005. Adaptive Capacity and Human Cognition: The Process of
Individual Adaptation to Climate Change. Global Environmental Change 15 (3):199-213.
Page 3-64
3.4 Other Multisector Tools
The tools described in this part of the compendium, listed in Table 3.4, are applicable to more
than one sector. They provide a general evaluation of adaptation options, are easily adapted to
numerous regions and situations, and are frequently used in conjunction with sector-specific
tools to develop a comprehensive analysis or in support of a complete framework. Some are
focused and produce specific information (e.g., M-CACES provides the user with estimates of
the cost of particular adaptations, while CCAV provides insight into impacts of climate
variability). Others are more general approaches that can be applied to more than one step of a
vulnerability and adaptation assessment (e.g., uncertainty and risk analysis, forecasting by
analogy, expert judgment). Several of the tools listed below are disaster risk reduction tools that
have been developed in response to numerous climate-related hazards. The application of these
tools can provide an effective framework for identifying risks and vulnerabilities, and to build
adaptive capacity.
Table 3.4. Other multisector tools

Expert Judgment
Impacts Database
Resource Approach to Assessment of Climate Change
Impact on Human Activity
Community-Based Disaster Risk Management Field
Practitioners’ Handbook
Natural Disaster Mitigation in Drinking Water and
Sewerage Systems: Guidelines for Vulnerability Analysis
Handbook for Estimating the Socio-Economic and
Environmental Effects of Disasters
The Good Practice Guide: Community Awareness and
Education in Emergency Management
Page 3-65
Description A methodology of descriptive statistics to illustrate the changing average conditions and the
variability in conditions over time. Climate time-series data can be described according to their
average conditions, but of particular importance for vulnerability are the impacts of adaptation
to the variability of conditions from year to year. Within the range of climatic conditions is a
range of conditions with which humans can cope. This range can be changed with adaptive
responses. The climatic conditions can also be described and compared according to the
variation of conditions over a particular time period (indicated by the variance).
Appropriate Use To assess climate change and variability in the context of the coping capacity of human
systems.
Scope All locations; all levels of analysis.
Key Output Allows user to understand changes not only in average climate conditions but also in extreme
conditions.
Key Input Climate time-series data.
Ease of Use Easy.
Training Required No formal training required, although an understanding of climatic data and descriptive
statistics is an asset.
Training Available None identified.
Computer None identified.
Requirements
Documentation Smit, B., D. McNabb, and J. Smithers. 1996. Agricultural adaptation to climatic variation.
Climatic Change 33:7-29.
Smit, B., I. Burton, R.J.T. Klein, and J. Wandel. 2000. An anatomy of adaptation to climate
change and variability. Climatic Change 45(1):223-251.
Smit, B., I. Burton, R.J.T. Klein, and R. Street. 1999. The science of adaptation: A framework
for assessment. Mitigation and Adaptation Strategies for Global Change 4(3-4):239-252.
Smit, B. 1999. Agricultural Adaptation to Climate Change in Canada. A Report to the
Adaptation Liaison Office.
Applications Applied by Environment Canada’s Environmental Adaptation Research Group, and in other
climate change and variability research in Canada and Germany.
Contacts for Elizabeth Harvey, University of Guelph, Department of Geography, Guelph,
Framework, ON N1G 2W1; Tel: 519.824.4120 ext. 8961; Fax: 519.837.2940;
Documentation, e-mail: eharvey@uoguelph.ca.
Technical Dr. Barry Smit, University of Guelph, Department of Geography, Guelph, ON N1G 2W1
Assistance Canada; Tel: 519.824.4120 ext. 3279; Fax: 519.837.2940; e-mail: bsmit@uoguelph.ca.
Ian Burton, Adaptation and Impacts Research Division (AIRD), Meteorological Service of
Canada, 4905 Dufferin Street, Downsview, ON M3S 5T4, Canada; Tel: 416.739.4314;
Fax: 416.739.4297; e-mail: ian.burton@ec.gc.ca.
Cost None identified.
Page 3-66
Expert Judgment
Description Expert judgment is an approach for soliciting informed opinions from individuals with
particular expertise. This approach is used to obtain a rapid assessment of the state of
knowledge about a particular aspect of climate change. It is frequently used in a panel format,
aggregating opinions to cover a broad range of issues regarding a topic. Expert judgment is
frequently used to produce position papers on issues requiring policy responses and is integral
to most other decision-making tools.
Appropriate Use This approach is most useful either in conjunction with a full research study or when there is
insufficient time to undertake a full study. It is important to be aware, however, of the
subjective nature of expert judgment and the need to select a representative sample of experts
to cover the full spectrum of opinion on an issue.
Key Output Current information on any area of climate change and subjective assessment of potential
adaptation options.
Key Input Knowledge of experts’ respective areas of expertise.
Ease of Use Easy to apply.
Training Required Requires knowledge of policy issues and available experts. More training may be required to
assemble an expert panel, formulate questionnaires, and interpret and aggregate expert
opinions.
Training Available Informal training offered; contact Ian Burton (see below) for information.
Computer None.
Requirements
Documentation Not applicable.
Applications UK, Mackenzie Basin in Canada, Finland.
Contacts for Tools, Ian Burton, Adaptation and Impacts Research Division (AIRD), Meteorological Service of
Documentation, Canada, 4905 Dufferin Street, Downsview, ON M3S 5T4, Canada; Tel: 416.739.4314;
Technical Fax: 416.739.4297; e-mail: ian.burton@ec.gc.ca.
Assistance
Cost Cost depends on the fee charged by the experts.
References Cohen, S.J. (ed.). 1997. Mackenzie Basin Impact Study. No. En 50_118/1997_IE.
Environment Canada, Downsview, Ontario.
Smith, J.B. and D.A. Tirpak. 1990. The Potential Effects of Global Climate Change on the
United States. Report to Congress, U.S. EPA, Washington, DC.
Page 3-67
Description This qualitative tool is a method for evaluating the effectiveness of potential adaptation
strategies by comparing observed adaptations to past climate extremes in different geographic
locations, sectors, or time periods. This method compares events that have had a similar effect
in the recent past to the likely impact of future events associated with climate change,
assuming that lessons can be learned from such past experience and then applied to future
situations. These compared situations can generally share several important characteristics
such as time scale, severity, reversibility, impacted sector, or aggravating factors, and point out
how well actual adaptation response worked or did not work.
Appropriate Use This approach is useful during the initial survey stages of evaluating adaptation strategies to
avoid duplicating research or to narrow the list of feasible options, and is generally used in
conjunction with a quantitative evaluation of adaptation options. This approach does not
provide a method to weigh the trade-offs among different adaptation options, but instead
provides insight into how the adaptation process may work. Also, an example of adaptation in
one place at a particular time is not always applicable to a future adaptation at a different
place. This approach has not seen extensive use recently.
Key Output A broad perspective on previous research and attempted strategies used to address similar
situations.
Key Input General information on other adaptation issues: research done, approaches used, problems
encountered. Often performed by a multidisciplinary panel of experts, including relevant
members of the research community such as climatologists, meteorologists, hydrologists,
entomologists, and epidemiologists.
Ease of Use Relatively easy to use, although the robustness of the comparison depends on the extent of the
user’s knowledge of the situations being compared.
Training Required Requires a background understanding of the adaptation issues being compared.
Training Available Contact Michael Glantz for more information (see Contacts below).
Computer None.
Requirements
Documentation Glantz, M., and J. Ausubel. 1998. Impact assessment by analogy: Comparing the impacts of
the ogallala aquifer depletion and CO2 induced climate change. In Societal Responses to
Regional Climate Change: Forecasting by Analogy. M. Glantz (ed.). Westview Press,
Boulder, CO, USA.
Applications Used in U.S. EPA-supported project on analogous forecasting of the societal responses to the
regional impacts of global warming. Also used to evaluate fisheries in Poland, Mexico, and the
Far East.
Contacts for Tools, Michael Glantz, University Corporation for Atmospheric Research, P.O. Box 3000, Boulder,
Documentation, CO 80303 USA; Tel: +1.303.497.8117; e-mail: glantz@ucar.edu.
Technical
Assistance
Cost Low cost to obtain documentation.
Page 3-68
Historical or Geographic Analogs: Forecasting by Analogy (cont.)
References Glantz, M. (ed.). 1998. Societal Responses to Regional Climatic Change: Forecasting by
Analogy. Westview Press, Boulder, CO, USA.
Coastal: Hands, E.B. 1983. The Great Lakes as a test model for profile responses to sea level
changes. In CRC Handbook of Coastal Processes and Erosion, Komar, P.D. (ed.). CRC Press,
Boca Raton, pp. 167-189.
N. Mimura and H. Nobuoka. 1995. Verification of the Bruun Rule for the estimation of
shoreline retreat caused by sea-level rise. In Coastal Dynamics 95, W.R. Dally and R.B.
Zeidler (eds.). American Society of Civil Engineers, New York, pp. 607-616.
Parkinson, R.W. (ed.) 1994. Sea-level rise and the fate of tidal wetlands. Journal of Coastal
Research 10:987-1086.
Health: FAO. 1998. An El Niño Primer. FAO Rome. (http://www.fao.org/).
Jury, M.R. 1996. Malaria forecasting project. In Workshop on Reducing Climate-Related
Vulnerability in Southern Africa. Victoria Falls, Zimbabwe, October 1-4, 1996.
SADC/NOAA/NASA. NOAA, OGP, Silver Spring, MD, USA.
Page 3-69
Description This approach can be applied through critical review of available literature and data or through
data analysis using software programs. Uncertainty and risk analysis allows the user to address
the errors and unknowns often associated with data and information used to evaluate climate
change adaptation measures. A key element of uncertainty and risk analysis is defining the
decision criterion that is most appropriate for the question at hand. Uncertainty and risk can be
assessed qualitatively, using probability ratings such as slight, moderate, and high. Uncertainty
can also be assessed quantitatively, using decision analysis tools (e.g., decision trees) or
sensitivity analyses such as Monte Carlo analysis. This method is often used in conjunction
with other assessment techniques.
Appropriate Use This tool is an important step in any assessment of climate change adaptation measures.
Quantitative analyses using decision theory or simulation techniques are most useful when
evaluating the data used for benefit-cost or similar quantitative analyses.
Key Output Depending on the method used, a quantitative or qualitative estimate of the uncertainty or risk
associated with data being used to evaluate an adaptation measure.
Key Input Information and data used for other analyses of an adaptation measure.
Ease of Use Relatively easy to apply.
Training Required Requires an understanding of the policy objectives and adaptation measures being considered.
Monte Carlo and other quantitative analyses require training in specific techniques and uses of
statistical software.
Training Available Contact Stratus Consulting for more information (see below).
Computer IBM-compatible 286; Lotus 1-2-3 or Excel spreadsheet software; @Risk, Crystal Ball
Requirements software applications.
Documentation U.S. EPA. Guidelines for Preparing Economic Analyses. U.S. Environmental Protection
Agency, Washington, DC. Available at
http://yosemite.epa.gov/ee/epa/eed.nsf/webpages/Guidelines.html.
Applications Used to help determine total programmatic effectiveness of the Global Environment Facility
(GEF).
Contacts for Tools, Joel Smith, Stratus Consulting, P.O. Box 4059, Boulder, CO 80306 USA;
Documentation, Tel: +1.303.381.8000; Fax: +1.303.381.8200; e-mail: jsmith@stratusconsulting.com;
Assistance
Cost Documentation is free. Cost of analysis varies depending on type of analysis used; quantitative
analyses are more time consuming and costly.
References Brklacich, M. and B. Smit. 1992. Implications of changes in climatic averages and variability
on food production opportunities in Ontario, Canada. Climatic Change 20:1-21.
Katz, R.W. 2002. Techniques for estimating uncertainty in climate change scenarios and
impact studies. Climate Research 20:167-185.
Page 3-70
Description M-CACES, a Windows-based software program, is required by the U.S. Army Corps of
Engineers for the preparation of water resources construction and rehabilitation cost estimates
for projects with federal costs exceeding US$2 million. The Unit Price Book associated with
M-CACES provides production rates, unit costs, and crew composition for the United States.
Price escalation for inflation is used to adjust pricing to the project schedule and to fully fund
the estimate.
Appropriate Use Useful for estimating the costs of large natural resources construction projects (including
dams, shoreline protection, and ecosystem rehabilitation). Best used for final rather than initial
cost analyses due to the amount of time and data required to complete.
Scope Designed for the United States, but can be adapted to other countries; multiple sectors; site-
specific.
Key Output Cost estimate for natural resources projects.
Key Input Quantity take-offs from drawings, specifications and references.
Ease of Use Requires extensive data on the costs associated with the project. Relatively easy to apply if
data are available; more rigorous results require more analysis.
Training Required Training is suggested to acquire skill in developing quality cost estimates and customizing
databases for site-specific or project-specific elements.
Training Available Building Systems Design (see Contacts below) offers monthly training classes.
Computer IBM compatible computer with Windows 95 or later operating system.
Requirements
Documentation Supplemental construction cost information is published in USA by R.S. Means Company,
Inc., Publishers & Consultants, +1.617.585.7880, or Dodge Cost Systems, McGraw Hill
Information Systems Company, +1.800.544.2678.
Applications Used as an internal tool by the U.S. Army Corps of Engineers to estimate construction and
rehabilitation costs of water resources projects. Also used by the U.S. Department of Defense,
the U.S. Department of Energy, and the U.S. Environmental Protection Agency.
Contacts for Tools, Tools and Documentation: Roy Braden, Cost Engineering Branch, Headquarters, U.S. Army
Documentation, Corps of Engineers, USA; Tel: +1.202.761.1495; e-mail: Roy.E.Braden@usace.army.mil.
Technical Technical Assistance: Building Systems Design, Inc., 1175 Peachtree St., 100 Colony Square,
Assistance Suite 1900, Atlanta, GA 30361 USA; Tel: +1.404.876.4700; Fax: +1.404.876.0006.
Cost Cost of obtaining and running the model depends on scale of project.
References None available.
Page 3-71
Impacts Database
Description The impacts database is a web-based database of climate / weather-related impacts as reported
in the media. It enables the user to assess the impacts of a particular climatic event thereby
enabling them to plan for future events of its kind.
Appropriate Use The tool is useful in assessing what impacts may result from extreme weather events. It is not
for use in distinguishing whether a particular weather event was a result of climate change
Scope The majority of impacts documented in the impacts database are UK-based. However, there
are certain instances of impacts outside of the UK.
Key Output User-specified search results supplied in the form of a summary for each example plus the
source of the full document.
Key Input A user-specified sector or searchable field.
Ease of Use Extremely easy to use.
Computer Access to the internet.
Requirements
Documentation All documentation is supplied within the database.
Applications Use in UKCIP presentations - this tool has only recently become available.
Contacts for Tools, Anna Steynor, Scientific Officer, UK Climate Impacts Programme; e-mail:
Documentation, anna.steynor@ukcip.org.uk.
Technical
Assistance
Cost None.
References None.
Page 3-72
Description PAGE2002 is a spreadsheet probabilistic model written in Excel with the @RISK add-in. The
model calculates regional and global impacts of climate change, and social costs of different
greenhouse gases. It also calculates the costs of abatement and adaptation. It is an Integrated
Assessment Model starting from emission projections, and carrying uncertainties throughout
the calculations.
Appropriate Use The model is designed to explore the impacts and social costs under any user-specified
emission scenarios. It can be used to calculate optimal abatements.
Scope The model is global in scope, with a user-defined focus region. It calculates to 2200 by default.
Key Output The model and the results obtained with it are the key outputs.
Key Input Emission scenarios and about 80 parameter probability distributions covering both scientific
and economic inputs.
Ease of Use Designed to be transparent and easy to use.
Training Required A single session with the model developer is all that is normally required.
Training Available The model developer will offer advice and support under contract.
Computer PC running Excel and @RISK.
Requirements
Documentation PAGE2002 is described in detail in Hope C, 2006, “The marginal impact of CO2 from
PAGE2002: An integrated assessment model incorporating the IPCC's five reasons for
concern”, Integrated Assessment, 6, 1, 19-56.
Applications Several analyses performed for the GB Office of Gas and Electricity Markets who paid for the
development of the model. PAGE2002 was the main model used for the impact calculations in
the UK Government’s Stern report.
Contacts for Tools, Dr Chris Hope, Judge Business School, University of Cambridge.
Documentation,
Technical
Assistance
Cost The model is free to use, on the condition that any publications resulting from the use of the
model include Dr Chris Hope as an author. The model developer will provide advice and
support under contract.
Page 3-73
PAGE2002 (Policy Analysis for the Greenhouse Effect) (cont.)
References Alberth, S. and C. Hope. 2007. Climate modelling with endogenous technical change:
Stochastic learning and optimal greenhouse gas abatement in the PAGE2002 model. Energy
Policy 35: 1795-1807.
Dietz S, C. Hope and N. Patmore. 2007. Some Economics of ‘Dangerous’ Climate Change:
Reflections on the Stern Review. Global Environmental Change 17(3-4):311-325.
Dietz, S., C. Hope, N. Stern and D. Zenghelis. 2007. Reflections On The Stern Review (1), A
Robust Case for Strong Action to Reduce the Risks of Climate Change. World Economics
8(1):121 - 168.
Hope, C. and D. Newbery. 2007. Calculating the social cost of carbon. Chapter 2 of Grubb, M., T.
Jamasb and M. Pollitt (eds.), Delivering a Low Carbon Electricity System: Technologies,
Economics and Policy, Cambridge University Press.
Hope, C. 2005. Integrated Assessment Models. Chapter 4 in Helm, D. (ed.), Climate Change
Policy, Oxford University Press.
Hope, C. 2006. The marginal impacts of CO2, CH4 and SF6 emissions. Climate Policy
6(5):537 - 544.
Hope, C. 2006. The marginal impact of CO2 from PAGE2002: An integrated assessment
model incorporating the IPCC's five reasons for concern. Integrated Assessment 6(1):19-56.
Hope, C. 2006. The social cost of carbon: what does it actually depend on? Climate Policy
6(5):566 - 572.
Hope, C. 2007. Discount rates, equity weights and the social cost of carbon. Energy
Economics. Available online 12 January 2007 at www.sciencedirect.com.
Hope, C. 2007. PAGE Modeling system. Chapter 2 of the Yale Symposium on the Stern Review,
Yale Center for the Study of Globalization, http://www.ycsg.yale.edu/climate/stern.html.
Wahba, M. and C. Hope. 2006. The marginal impact of carbon dioxide under two scenarios of
future emissions. Energy Policy 34(17):3305-3316.
Page 3-74
Resource Approach to Assessment of Climate Change Impact on Human Activity
Description Resource approach allows decision makers to include information on climate conditions and
their change directly in economic analysis. The climate resources estimation helps to represent
spatial distribution of climate resources for given field of human activity and to evaluate total
climate resources for concrete region and to compare them over the whole country. This
methodology creates opportunities to compare climate resources for different economic sectors
in various regions at present and in the future and to choose the regions that could be optimal
for development of specific activity taking into account probable climate change. Particularly,
this approach provides some tools to assess vulnerability of regions and economic sectors to
climate change in terms of climate resources change. Resource approach involves 5 steps: (1)
to select specific indexes of climate impact on objects and processes in a given economy
sector, (2) to calculate these impact indexes both at present and for the future using results
regional climate projections, (3) to convert climate impact indexes from initial physical units to
relative (non-dimensional) units, (4) to estimate climate resource for a given economy sector in
each region of the country, and (5) to compare climate resource values in different regions and
choose the optimal ones.
Appropriate Use Resource approach is relevant to decision makers who are responsible for regional planning of
economic activity, strategic planning of a given economy sector, ensuring the sustainable
development of the region’s economy. This information can be also used for concrete
applications including the estimation of economic value for land.
Scope All regions, all economic sectors.
Key Output The values of climate resources and evaluation of adaptation potential to climate change for
various economic branches in all regions of a given country expressed in relative and monetary
(for some sectors) units.
Key Input Meteorological data for specific climate impact index calculations, results of regional climate
projections.
Ease of Use Relatively easy to apply, only basic computer skills are needed.
Training Required Requires little training, but it requires expert knowledge to choose appropriate climate impact
indexes.
Training Available No formal training currently offered. Sources of assistance / consulting can be obtained from
contacts listed below.
Requirements
Documentation Encyclopedia of climate resources of Russia. 2005, 319 pp., Gidrometeoizdat, St. Petersburg.
Applications Applications across a wide range of regions in Russian Federation in the following sectors:
building construction, land use planning, power grid planning.
Contacts for Tools, Nina Kobysheva, Voeikov Main Geophysical Observatory, 194021 Karbyshev Str. 7, St.
Documentation, Petersburg, Russian Federation; Tel: +7.812.2974390; Fax: +7.812.297.8661; e-mail:
Technical director@main.mgo.rssi.ru or kobyshnv@main.mgo.rssi.ru.
Assistance
Cost Depends on breadth of assessment.
Page 3-75
Resource Approach to Assessment of Climate Change Impact on Human Activity (cont.)
References Akentyeva, E.M. 2005. New approaches to the climate resource estimation. In Proceedings -
GCOS Regional Workshop for Eastern and Central Europe, Leipzig, Germany [CD-ROM
computer file].
Kobysheva, N.V. and O.B. Iljina. 2001. Methodology of climate resource estimation in
Leningrad region. Meteorology and climatology 9:17-24.
Kobysheva, N.V. 2005. Climate as a Natural Resource for Integrated Planning and
Management. In Proceedings - Technical Conference “Climate as a Resource”, Beijing, China
[CD-ROM computer file].
Page 3-76
Description CHARM is defined as a comprehensive hazard and risk management tool for use within an
integrated national development planning process. It aims to facilitate greater collaboration
between risk reduction projects at all levels (though mostly at the national level with
participation from stakeholders for decision-making) and across sectors to enhance sustainable
development. CHARM takes all hazards into account across the whole country.
Appropriate Use This tool can be used for mainstreaming disaster risk reduction into ongoing national
development planning processes. It aims to address all hazards including natural and human-
induced, and also to help identify measures that can be implemented in all phases of disaster
management (prevention, preparedness, response, and recovery). The emphasis is on bringing
a wide range of stakeholders together for risk reduction to enhance effectiveness of the
combined efforts.
Scope National level.
Key Output The immediate output of the CHARM process is to develop a matrix summarizing national
risks and risk reduction measures (or “treatment options”) that considers the activities of all
agencies. Planners then target the gaps identified in the matrix.
Step 1 – Context established

Step 2 – Risks identified
Step 3 – Risks analyzed
Step 4 – Risks evaluated
Step 5 – Risks treated and results evaluated
Key Input Step 1 – Identification of national development priorities, organizational issues, and initial risk
evaluation criteria
Step 2 – Identification of hazard, vulnerable sectors, and impacts
Step 3 – Assessment of risks with stakeholders based on agreed indicators, such as frequency
of hazards, potential impacts, etc.
Step 4 – Determination of acceptable levels of risks and priorities for action
Step 5 – Selection of risk reduction measures; assignment of roles and responsibilities for all
partners; evaluation against agreed criteria
Ease of Use Readily usable by those with experience in policy analysis, developing work plans, and inter-
agency planning.
Training Required Knowledge of tools for each step is needed (e.g. to rank development challenges, develop
budgets).
Training Available Training is available through broad stakeholder consultation workshops involving both
national and regional stakeholders. SOPAC has also developed a manual.
Computer Word processing and spreadsheets
Requirements
Documentation SOPAC. 2001. Comprehensive Hazard Risk Management Regional Guidelines for Pacific
Island Countries. Suva: South Pacific Applied Geosciences Commission.
Guideline and manual available in print or on CD (see Contacts below).
Applications CHARM has been used for planning in Palau, Kiribati, Vanuatu, Fiji, and Tonga, and it has
also been aligned to the Joint Australia-New Zealand Risk Management Standard.
Contacts for Tools, SOPAC Secretariat, Private Mail Bag, GPO, Suva, Fiji Islands; Tel: +679.338.1377;
Documentation, Fax: +679. 3370040.
Technical Atu Kaloumaira, Community Risk Programme Advisor; e-mail: atu@sopac.org.
Assistance Noud Leenders, Community Risk Management Advisor; e-mail: noud@sopac.org.
Page 3-77
Comprehensive Hazard and Risk Management (CHARM) (cont.)
Cost Free.
References See Documentation.
Page 3-78
Community-Based Disaster Risk Management Field Practitioners’ Handbook
Description The handbook briefly explains the concept of community-based disaster risk management
(CBDRM) and provides practical tools that can be applied in community-level programming.
The Handbook is divided into four parts: (1) an introduction to CBDRM, (2) specific step-by-
step exercises, (3) cross-cutting issues of gender and communication, and (4) disaster risks in
Southeast Asia.
The tools in Section 2 cover seven types of activities in CBDRM:

(1) Selecting the community
(2) Rapport building and understanding the community
(3) Participatory disaster risk assessment
(4) Participatory disaster risk management planning
(5) Building/training a community disaster risk management organization (CDRMO)
(6) Community-managed implementation
(7) Participatory monitoring and evaluation
The resource pack for risk identification (Step 3) includes instructions and guiding questions
for the most commonly used participatory assessment tools, e.g. constructing timelines, hazard
maps, rankings, and calendars.
Appropriate Use This handbook is a comprehensive how-to guide that can be used to assist project teams
working at the local level to ensure the participation of community members in reducing
disaster risks. Each of the seven steps, particularly Step 3, is clearly outlined, along with
simple instructions for group exercises, information to gather, and stakeholders to involve.
Scope Community level.
Key Output Overall: “The CBDRM process should lead to progressive improvements in public safety and
community disaster resilience. It should contribute to equitable and sustainable community
development in the long term.”
Step 1 – Priority vulnerable communities identified

Step 2 – Trust between community and project members; understanding of community needs
among project members
Step 3 – Disaster risks identified and community members understand these risks
Step 4 – Community disaster risk management plan
Step 5 – CDRMO established and equipped with skills to implement their disaster risk
management plan
Step 6 – Planned activities implemented effectively and on time, with participation of
stakeholders
Step 7 – Appropriate indicators of program success developed and progress measured, with
participation of stakeholders
Page 3-79
Community-Based Disaster Risk Management Field Practitioners’ Handbook (cont.)
Key Input Step 1 – Information on various criteria developed by decision makers
Step 2 – Information about the community and efforts to develop relationships/understanding
with community members
Step 3 – Range of qualitative and quantitative data about the hazards, vulnerabilities, and
capacities in the community
Step 4 – Dialogue among stakeholders to identify needed measures
Step 5 – Identification of CDRMO members and training
Step 6 – Responsibilities carried out by members; periodic reviews
Step 7 – Range of qualitative and quantitative data about activities’ impacts; dialogue between
stakeholders
Ease of Use Readily usable.
Training Required Some training or experience in working at the local level would be useful.
Training Available Contact Zubair Murshed at mzubair@adpc.net or adpc@adpc.net.
Computer • None for community risk identification exercises
Requirements • Word processing and spreadsheet skills for program planning and implementation,
depending on complexity of local activities
• GIS optional for community disaster risk assessment (Step 3)
Documentation Abarquez, I. and Z. Murshed. 2004. Community-Based Disaster Risk Management: Field
Practitioners’ Handbook. Bangkok: Asian Disaster Preparedness Center. Can be downloaded
from http://www.adpc.net/pdr-sea/publications/12Handbk.pdf.
Applications This methodology has been used in several communities throughout South and Southeast Asia.
Contacts for Tools, Information Manager, PDR SEA, Asian Disaster Preparedness Center (ADPC), P.O. Box 4,
Documentation, Klong Luang, Pathumthani 12120, Thailand; Tel: +66.2.516.5900 to 5910; Fax:
Technical +66.2.524.5360; e-mail: adpc@adpc.net; website: www.adpc.net.
Assistance
Cost Free.
References Arcilla, M.J.D., Z.G. Delica et al. (eds.). 1998. 4B: Project Development, Monitoring and
Evaluation in Disaster Situations. Quezon City, Philippines, Citizen’s Disaster Response
Center.
Gutteling and Wiegman, 1996. Exploring Risk Communication: Advances in natural and
technological hazards research, Kluwer Academic Publishers, Dordrecht, The Netherlands.
Page 3-80
Description These guidelines provide advice on the organization of emergency assessments, starting with
an introduction of key concepts and then outlining each step. The steps are roughly laid out in
the order required during an assessment. The chapter on fieldwork notes some basic principles
that should underlie activities, such as participation, inclusion or marginal groups, looking out
for biases, etc. Results of the general assessment can indicate where more technical assessment
is needed. The framework can be easily adapted to incorporate climate change issues as it
provides fairly general guidelines on the assessment process.
Appropriate Use Aimed at generalists in the Red Cross Red Crescent community conducting an assessment to
provide an overview of the situation. The guidelines cover the following steps, some of which
may overlap:
(1) Planning
(2) Office tasks
(3) Fieldwork (organization and management)
(4) Analysis
(5) Reporting
The chapter on fieldwork includes detailed descriptions of various types of information

gathering exercises and issues to consider for each one, including tips on establishing trust,
cultural sensitivities, suggested questions, and extensive checklists that were compiled by
sector specialists. It gives very clear, easily understandable directions for carrying out
activities.
The chapter on analysis provides worksheets team members may use to synthesize
information. These are largely based on IFRC’s vulnerability and capacity framework (see
References).
Scope Local affected areas.
Key Output • Planning – Determination of whether an assessment is needed, objectives and terms of
reference, and type of assessment (rapid/detailed/continual).
• Office tasks – Arrangements for coordination, required resources identified, team
assembled and briefed, key locations identified.
• Fieldwork – Sufficient information gathered in selected locations on issues identified
during planning phase.
• Analysis – Identification of the main problems, affected populations, and local
capacity; recommendations for further action.
• Reporting – Clear, concise reports following a recommended format: summary;
background information; details and assumptions; needs, coping strategies, and
assistance; program proposals.
Page 3-81
Guidelines for Emergency Assessment (cont.)
Key Input The guidelines recommend that each of these steps are generally undertaken sequentially, so
that the output of the planning phase is used as an input to the office-based tasks, and so on.
• Planning – Information from secondary sources on the nature of the emergency and
urgency of an assessment
• Office tasks – Objectives and terms of reference; information on potential team
members’ skills
• Fieldwork – Secondary information, interviews with community members and
authorities, group exercises, household visits, etc.
• Analysis – Summaries of information that have been checked for consistency,
discussion among team members.
• Reporting – Results of the analysis.
Ease of Use Readily usable by anyone conducting an assessment.
Training Available Contact regional and country offices:
http://www.ifrc.org/who/delegations.asp
Computer None, although word processing and spreadsheets may be useful for analysis and reporting.
Requirements
Documentation IFRC. 2005. Guidelines for Emergency Assessment. Geneva: International Federation of the
Red Cross and Red Crescent Societies.
Applications Based on IFRC’s experience in conducting assessments following disasters around the world.
Contacts for Tools, International Federation of Red Cross and Red Crescent Societies, PO Box 372, CH-1211,
Documentation, Geneva 19, Switzerland; Tel: +41.22.730.4222; Fax: +41.22.733.0395; e-mail:
Technical secretariat@ifrc.org; website: www.ifrc.org.
Assistance
Cost Free.
References IFRC. 1999. Code of conduct for the International Red Cross and Red Crescent Movement and
Non-Governmental Organizations in Disaster Relief. Geneva: International Federation of the
Red Cross and Red Crescent Societies, http://www.ifrc.org/publicat/conduct/code.asp.
IFRC. 1999. Vulnerability and capacity assessment: an International Federation guide. Geneva:
International Federation of the Red Cross and Red Crescent Societies,
http://www.ifrc.org/what/disasters/dp/planning/vcaguidelines.asp .
IFRC. 2000. Better Programming Initiative: options for better aid programming in post-conflict
settings. Geneva: International Federation of the Red Cross and Red Crescent Societies.
Sphere Project. 2003. Humanitarian Charter and Minimum Standards in Disaster Response.
Geneva: Sphere Project, http://www.sphereproject.org/handbook/index.htm.
Page 3-82
Description These guidelines describe how to establish a climate watch system and the information
required in a climate watch. Governments typically react to extreme climate events through
“crisis management” rather than through continuous risk reduction. Decision makers have
cited the lack of information about approaching climate hazards with sufficient notice to take
action. Climate watches aim to deliver this necessary, accurate information to end-users
through the National Meteorological Services (NMSs) in a timely and useful manner.
Appropriate Use This tool targets “the special situation and needs of smaller NMSs, which have limited
resources” in establishing the system and issuing climate watches. The process is based on
continuous collaboration with climate information users, and it should serve as a mechanism to
initiate preparedness activities to limit impacts from climate anomalies (e.g. excessive rainfall
over several months). The guidelines discuss the rationale for a climate watch system, current
activities and capacity in NMSs, characteristics and operation of a climate watch system,
format and criteria for issuing a climate watch, and various annexes, including examples of
climate watches.
Climate watch format:

• A standard heading, issuing authority, and time and date of issue
• Areas for which the advice is current (the appropriate regions)
• Period during which the climate watch is valid
• Where appropriate, an indication of the reason for the climate watch, which may
include graphical information
• Relevant skill of long range forecasts
• Possible follow-on effects of the climate anomaly
• Date at which the next update will be issued
Scope National level; meteorological services.
Key Output Information about significant climate anomalies for the forthcoming season(s) that may have
substantial impacts on a sub-national scale.
(1) Establishment of national climate watch system

(2) Capacity built for the climate watch system
(3) Operation of national climate watch
(4) Climate watch system evaluated
Key Input • A network of observation stations; an understanding of the current and recent past
climate of the region in question; linkage with regional/global monitoring systems;
dissemination channels to reach users; partnerships with key stakeholders
• Understanding of users’ needs; criteria for issuing a Climate Watch defined (e.g.
average rainfalls below a certain level for the season); technical training;
strengthening of communication links
• Monitoring and analysis of climate data; communication with other organizations that
maintain their observation systems; communication with intermediaries to translate
information for user groups
• Periodic reviews of the system and process; dialogue with users on their needs to
identify gaps in dissemination or content
Ease of Use Usable by national meteorological services.
Training Required Requires expertise in meteorology/climatology and understanding of climate information
users’ needs.
Page 3-83
Guidelines on Climate Watches (cont.)
Training Available See Contacts.
Computer Software for forecasting and word processing.
Requirements
Documentation WMO. 2005. Guidelines on Climate Watches. Geneva: World Meteorological Organization.
Applications None identified.
Contacts for Tools, Omar Baddour, Chief, World Climate Data and Monitoring Programme, WMO, 7bis Ave. de
Documentation, la Paix, C.P. 2300, CH-1211, Geneva 2, Switzerland; Tel: 41.22.730.8268 or 41.22.730.8214;
Technical Fax: 41.22.730.8042; e-mail: obaddour@wmo.ch.
Assistance
Cost Free.
References Technical documents published under the WMO World Climate Data and Monitoring
Programme (WCDMP).
Page 3-84
Description One of the problems following disasters is that damaged areas are often reconstructed quickly
and without adequate resources. The result is that vulnerability is reconstructed rather than
reduced. This tool helps to assess the direct and indirect socio-economic impacts of disasters,
and to identify the most affected areas and priority areas for recovery. It outlines the
conceptual and general methodological aspects of estimating the asset damage, losses in the
flows of goods and services, as well as any effects on the macroeconomy. The handbook is
divided into five sections:
1. Methodological and conceptual framework
2. Assessing impacts in social sectors
3. Assessing impacts on infrastructure
4. Assessing impacts in economic sectors
5. Assessing impacts in cross-sectoral areas, such as the environment, gender, and
employment
Appropriate Use This type of assessment should follow the emergency phase of a man-made or natural disaster,
so it will not interfere with urgent humanitarian activities. Sufficient quantitative information
on damages is also more likely to be available after that period. The tool is good for
organizations that want to understand a wider range of disaster risks. By assessing the direct
and longer-term indirect socio-economic impacts, organizations then have a better idea of how
to reduce the risks in future programs that may have development or environmental goals. The
tool can be adapted to comprehensively assess socio-economic impacts of climate change.
Sections 2-5 include a definition of the sector, an overview of likely direct and indirect
damages, the quantitative and qualitative information needed, possible information sources,
general instructions on analyzing the data, and issues to consider in assessing macroeconomic
impacts arising from damages in that sector. It is not a step-by-step guide, but rather gives an
overview of general steps to be taken in each assessment.
Scope National or sub-national level; sectoral.
Key Output A measurement, summarized in table form and in monetary terms where possible, of the
impacts of disasters on the society, economy and environment of the affected country or
region. Results are divided into direct, indirect and macroeconomic effects (employment, the
balance of payments, public finances, and prices and inflation). The disaster may also have
benefits, so the assessment refers to the net effect. The assessment identifies the key
geographical areas and sectors affected, together with corresponding reconstruction priorities.
It can provide a way to estimate the country’s capacity to undertake reconstruction on its own
and the extent to which financial and technical cooperation are needed. For the longer term, it
may identify the public policy changes and development programs to address these needs.
Key Input Quantitative and qualitative information on conditions both before and following the disaster.
The assessment team must decide on the balance between precision and speed in conducting
the assessment. “Shadow prices” may be used to try to take into account the indirect effects
and externalities of disasters.
Ease of Use Experience with economic valuation and assessing damage in specific sectors required. The
use of market vs. social prices will depend on the availability of information and time to
conduct the assessment.
Training Required Specialist knowledge in each sector.
Page 3-85
(cont.)
Training Available Instituto Latinoamericano y del Caribe de Planificación Económica y Social (ILPES),
ECLAC’s training division, offers courses on various economic and social issues of the region.
ILPES, Av. Dag Hammarskjöld 3477, Vitacura, Casilla 179-D, Santiago, Chile;
Tel: +56.2.210.2506/7; Fax: +56.2.206.6104; e-mail: cursosilpes-cepal@eclac.cl.
Computer Various software programs are recommended for some assessments, e.g. Redatam by
Requirements CELADE (see References) or other GIS programs (ArcView, MapInfo, IDRISI, or GISMAP)
Documentation ECLAC. 2003. Handbook for Estimating the Socio-Economic and Environmental Effects of
Disasters. Santiago, Chile: Economic Commission for Latin America and the Caribbean.
www.proventionconsortium.org/toolkit.htm
Hardcopies available at: ECLAC Publications, Casilla 179D, Santiago, Chile;

Fax: +56.2.210.2069; e-mail: publications@eclac.cl.
Applications The handbook has been used throughout Latin America and the Caribbean. Assessments
following the Indian Ocean disaster also used the methodology, particularly in the cases of
Indonesia and India.
Contacts for Tools, Ricardo Zapata-Martí, Focal Point for Disaster Evaluations, Economic Commission for Latin
Documentation, America and the Caribbean, Av. Presidente Masaryk 29, 11570 México, D.F., Apartado Postal
Technical 6-718, México D.F.; Tel: +52.55.5263.9600; Fax: +52.55.5531.1151;
Assistance e-mail: cepal@un.org.mx , izapata@un.org.mx.
Cost Free.
References Redatam software: http://www.eclac.cl/redatam/default.asp?idioma=IN
The Handbook, sample reports, and case studies:
http://siteresources.worldbank.org/INTDISMGMT/Resources/guidelines.htm
Page 3-86
Natural Disaster Mitigation in Drinking Water and Sewerage Systems: Guidelines for
Vulnerability Analysis
Description These guidelines provide the basic tools to evaluate the vulnerability of a drinking and
sewerage system to various natural hazards. These systems are vital to development, as well as
to ensuring a return to normalcy following a disaster. Conducting this vulnerability analysis
helps identify preparedness and mitigation measures to limit risks. It also identifies the
response mechanisms that should be put into action in the event of a disaster. The risk of
damage to water systems increases with factors such as uncontrolled growth in urban areas,
deficiencies in infrastructure, and climate change.
The guide is divided into four sections:

(1) Planning
(2) Principles of vulnerability analysis
(3) Description of hazards and impacts
(4) Conducting a vulnerability analysis for specific hazards
Appropriate Use The tool is ideally used during the disaster preparedness phase to identify and implement
mitigation measures. It is aimed at engineers and technical personnel of water service
companies to project how the water systems will perform in the event of the disaster and to
minimize damage. Vulnerability and probabilities of damage are expressed as various
formulae.
The guide provides an overview for each section with issues to consider at each step. It also
includes checklists (e.g. characteristics of an emergency operations center and the emergency
committee; components of an emergency response plan), matrices to describe system
vulnerabilities (formats provided in annexes), and extensive information on impacts on water
systems from earthquakes, volcanoes, hurricanes, floods, etc. in Chapter 3 and annexes.
Scope Water systems (with coverage being sub-national, municipal, etc.)
Key Output • Planning – Emergency committee established within the water company, with roles
and responsibilities defined; emergency operations center established; partnerships
with national organizations established.
• Vulnerability analysis – Identification and quantification of deficiencies in the
physical system and the organization’s capacity to provide services in a disaster;
strengths of the physical system and the organization identified; recommendations for
mitigating disaster impacts.
• Mitigation and emergency response plans for administration/operational aspects –
Identification of roles and responsibilities, resources required, and measures to reduce
vulnerability. Measures may include: improvements in communication systems,
provision of auxiliary generators, frequent line inspections, detection of slow
landslides, repair of leaks and planning for emergency response.
• Mitigation and emergency response plans for physical aspects – Identification of roles
and responsibilities, resources required, and measures to reduce vulnerability.
Measures may include: retrofitting, substitution, repair, placement of redundant
equipment, improved access, etc.
Page 3-87
Natural Disaster Mitigation in Drinking Water and Sewerage Systems: Guidelines for
Vulnerability Analysis (cont.)
Key Input • Planning – Information on: national standards, institutional coordination, and
resources available for preparedness and response; and dialogue with partners
• Vulnerability analysis – Information on: organizational and legal aspects, availability
of resources, hazards and likely impacts on the water system, current state of system
and operating requirements, sensitivity of components to hazards, and the response
capacity of the services.
• Mitigation and emergency response plans – Information from the vulnerability
analysis, priorities for implementing measures, and resources available.
Ease of Use Can be used as an overview for the emergency committee, although the vulnerability analysis
should be conducted by a team of specialists.
Training Required Vulnerability analysis requires extensive experience in the design, operation, maintenance, and
repair of a drinking water and sewerage system’s components.
Training Available The Virtual Campus of Public Health is a consortium of institutions led by PAHO/WHO for
continuing education. http://www.campusvirtualsp.org/eng/index.html.
Computer Various specialized software, word processing, and spreadsheets.
Requirements
Documentation PAHO. 1998. Natural Disaster Mitigation in Drinking Water and Sewerage Systems:
Guidelines for Vulnerability Analysis. Washington, DC: Pan American Health Organization,
Regional Office of the World Health Organization,
http://www.paho.org/English/DD/PED/natureng.htm.
Applications Used throughout Latin America and the Caribbean. Case study in documentation from Limon,
Costa Rica, to assess earthquake vulnerability.
Contacts for Tools, Emergency Preparedness and Disaster, Relief Coordination Program, Pan American Health
Documentation, Organization, 525 Twenty-third Street, N.W., Washington, D.C. 20037, USA;
Technical Fax:+1.202.775.4578; e-mail: disaster@paho.org.
Assistance
Contact lists for the Americas during a disaster:
http://www.paho.org/english/DD/PED/contactos.htm
Cost Free.
References Bibliography available in document.
Page 3-88
The Good Practice Guide: Community Awareness and Education in Emergency
Management
Description During the emergency period, a well-prepared community can reduce the impacts from the
disaster. Community members often play a large role in providing relief for each other. This
tool presents best practices, ideas, plans, and suggestions for educating the community on
disaster preparedness, rather than a how-to guide on communications. The broad framework
can be easily adapted for specific communities.
The guide provides the following information:

1. Introduction to the issue and how to get people’s attention
2. Planning a campaign, with information on a range of communication tactics
3. Evaluating a campaign
4. Working with the media, partners and sponsors, and the community
5. Information resources
Appropriate Use The guide aims to assist in planning and implementing community awareness and education
campaigns. It is aimed at local government authorities, health services, police, fire services,
schools, and other community organizations.
It lays out the basic steps of an awareness campaign, describes communication tactics (e.g.
print/electronic communications, giveaways, special events, etc.), and outlines a method for
evaluating the campaign’s performance.
Scope Local level
Key Output Step 1 – Target audience identified
Step 2 – Target audience’s needs and wants identified
Step 3 – Key message developed
Step 4 – Measurable objectives identified
Step 5 – Tactics chosen
Step 6 – Required resources secured
Step 7 – Awareness and education campaign implemented
Step 8 – Awareness and education campaign evaluated and documented results available
Key Input Step 1 – Information on vulnerable groups and potential partners in reaching them
Step 2 – Discussions with community representatives and members; review of existing sources
of information (newspapers, radio, etc.)
Step 3 – Identification of hazards and priority messages
Step 4 – Development of campaign objectives and concrete indicators to measure changes
Step 5 – Identification of effective information sources and delivery methods for the target
audience, as well as the required resources
Step 6 – Partnerships developed; information on available staff and financial resources
Step 7 – Commitment of staff and volunteers; definition of roles, responsibilities, and a
timetable for activities
Step 8 – Review of the campaign against indicators, e.g. through surveys, observation, or
discussions
Ease of Use Readily usable.
Training Available See Contacts below.
Page 3-89
The Good Practice Guide: Community Awareness and Education in Emergency
Management (cont.)
Computer None.
Requirements
Documentation EMA. 2000. The Good Practice Guide: Community awareness and education in emergency
management. Canberra: Emergency Management Australia.
http://www.crid.or.cr/digitalizacion/pdf/eng/doc12728/doc12728.htm
Applications Based on EMA’s experience in Australia, but easily adaptable to other contexts.
Contacts for Tools, Emergency Management Australia, PO Box 1020 Dickson, Australian Capital Territory 2602,
Documentation, Australia; Tel: 61.2.6256.4600; Fax: 61.2.6256.4653; e-mail: ema@ema.gov.au.
Technical
Assistance
Cost Free.
References References included in document on case studies, additional methodologies, communication
tips, etc.
Documents on local risk management, community education, community preparedness, and
related sites (mostly in Spanish):
http://www.crid.or.cr/crid/MiniKitCommunityParticipation/documentos_interes_participacion_
comunitaria_ing.html#capacitacion
EMA publications on community evacuation coordination, flood warnings, and other response
activities at: www.ema.gov.au
Page 3-90
4. Sector-Specific Tools
The tools described in this section of the compendium are examples of tools that an analyst
might consider employing within a given sector and tend to be applicable to only one sector.
However, the tools described in each section here should by no means be considered a
comprehensive listing of tools that are available. The following sectors are included: agriculture,
water, coastal resources, and human health.
4.1 Agricultural Sector Tools

The agricultural sector tools described in this compendium, listed in Table 4.1, range from
sector-wide economic analyses to farm-level crop models. The crop process models address the
impact of various management and climate change scenarios on single crops (e.g., WOFOST,
ICASA, ALFALFA, ORYZA), multiple crops (e.g., APSIM), and entire ecosystems
(e.g., CENTURY). Other tools can be used to examine particular ecological factors or processes
(e.g., ACRU) or support bigger picture strategic adaptation decisions (e.g., MAACV, RRI,
CLOUD, CRAM). The economic models (e.g., Ricardian analysis and input-output accounting)
assist the user in evaluating the economic impacts of changing land values, supply and demand,
and commodity production resulting from climate change. There are substantially more
agricultural sector tools than there are tools in other sectors. This is because many agricultural
models are crop specific or are applicable only to particular regions, whereas models in other
sectors tend to be more generally applicable.
Page 4-1
Table 4.1. Tools covered in agricultural sector
WOFOST
ORYZA 2000
Information and Decision Support System for Climate Change Studies in South East South America (IDSS-
SESA Climate Change)
Decision Support Systems Linking Agro-Climatic Indices with GCM-Originated Climate Change Scenarios
AgroMetShell
FAOClim 2.0
CLIMWAT 2.0
CM Box
Process Crop Models: Decision Support System for Agrotechnology Transfer (DSSAT) developed under the
International Consortium for Agricultural Systems Applications (ICASA)
Economic Models: Econometric (Ricardian-Based) Models
Page 4-2
Description APSIM is a modeling framework with the ability to integrate models derived in fragmented
research efforts. This enables research from one discipline or domain to be transported to the
benefit of some other discipline or domain. It also facilitates comparison of models or
submodels on a common platform. This functionality uses a “plug-in-pull-out” approach to
APSIM design. The user can configure a model by choosing a set of submodels from a suite of
crop, soil, and utility modules. Any logical combination of modules can be simply specified by
the user “plugging in” required modules and “pulling out” any modules no longer required. Its
crop simulation models share the same modules for the simulation of the soil, water, and
nitrogen balances. APSIM can simulate more than 20 crops and forests (e.g., alfalfa, eucalyptus,
cowpea, pigeonpea, peanuts, cotton, lupin, maize, wheat, barley, sunflower, sugarcane,
chickpea, tomato). APSIM outputs can be used for spatial studies by linking with geographic
information systems (GIS).
Appropriate Use The APSIM environment is an effective tool for analyzing whole-farm systems, including crop
and pasture sequences and rotations, and for considering strategic and tactical planning. APSIM
allows users to improve understanding of the impact of climate, soil types, and management on
crop and pasture production. It is a powerful tool for exploring agronomic adaptations such as
changes in planting dates, cultivar types, fertilizer/irrigation management, etc.
Scope Site-specific but can be extrapolated to national and regional levels using GIS.
Key Output Changes in crop and pasture yields, yield components, soil erosion losses, for different climate
change scenarios.
Key Input Soil properties, daily climate data, cultivar characteristics, and agronomic management.
Ease of Use For trained agronomists. Requires advanced knowledge of plant growth and soil processes.
Training Required APSIM training takes approximately one week to acquire minimum skills to conduct simple
simulations.
Training Available Training courses are offered by APSRU (see Contacts below).
Computer Windows-based PC.
Requirements
Documentation Available at: http://www.apsim.info/apsim/Publish/Docs/Documentation.xml.
Applications Used in Australia, APN projects in Asia, and AIACC activities in South America.
Contacts for Christopher Murphy, APSRU, PO Box 102, Toowoomba, QLD, 4350, Australia;
Framework, Tel: +61.07.4688.1394; e-mail: Christopher.Murphy@dpi.qld.gov.au.
Documentation, Support desk: http://www.apsim.info/apsim/default.asp.
Technical
Assistance
Cost Not identified.
Page 4-3
APSIM (Agricultural Production Systems sIMulator) (cont.)
References Keating, B.A., P. S. Carberry, G. L. Hammer, M. E. Probert, M. J. Robertson, D. Holzworth, N.
I. Huth, J. N. G. Hargreaves, H. Meinke, Z. Hochman, G. McLean, K. Verburg, V. Snow, J. P.
Dimes, M. Silburn, E. Wang, S. Brown, K. L. Bristow, S. Asseng, S. Chapman, R. L. McCown,
D. M. Freebairn and C. J. Smith. 2003. An overview of APSIM, a model designed for farming
systems simulation. European Journal of Agronomy 18(3-4):267-288.
McCown, R.L., G.L. Hammer, J.N.G. Hargreaves, D.P. Holzworth, and D.M. Freebairn. 1996.
APSIM: A novel software system for model development, model testing and simulation in
agricultural systems research. Agricultural Systems 50:255-271.
Yunusa, I.A.M., W.D. Bellotti, A.D. Moore, M.E. Probert, J.A. Baldock and S.M. Miyan. 2004.
An exploratory evaluation of APSIM to simulate growth and yield processes for winter cereals
in rotation systems in South Australia. Australian Journal of Experimental Agriculture
44(8):787–800.
Page 4-4
WOFOST
Description WOFOST simulates the daily growth of a specific crop, given the selected weather and soil
data. Each simulation is conducted for selected specific boundary conditions, which comprise
the crop calendar and the soil’s water and nutrient status. WOFOST follows the hierarchical
distinction between potential and limited production. Light interception and CO2 assimilation
are the growth driving processes, and crop phenological development is the growth controlling
process. WOFOST can be used to estimate crop production, indicate yield variability, evaluate
effects of climate changes or soil fertility changes, and determine limiting biophysical factors.
The following crop models are available: wheat, grain maize, barley, rice, sugar beet, potato,
field bean, soybean, oilseed rape, and sunflower.
Appropriate Use WOFOST considers only ecological factors under the assumption that optimum management
practices are applied.
Scope WOFOST is one-dimensional, mechanistic, and site-specific. Its application to regions relies on
the selection of representative points, followed by spatial aggregation or interpolation (e.g.,
linked to a GIS).
Key Output Crop yield and variability for different climate change scenarios.
Key Input Rainfall, temperature, wind speed, global radiation, air humidity, soil moisture content at
various suction levels, and data on saturated and unsaturated water flow. Data on site-specific
soil and crop management.
Ease of Use For trained agronomists.
Training Required No formal training required, but advanced knowledge of plant growth and soil processes is
needed.
Training Available Training and support is available for a fee.
Requirements
Documentation Hijmans R.J., I.M. Guiking-Lens, and C.A. van Diepen. 1994. WOFOST 6.0: User’s Guide for
the WOFOST 6.0 Crop Growth Simulation Model. Technical Document 12. ISSN 0928-0944.
DLO Winand Staring Centre, Wageningen, The Netherlands.
Applications WOFOST has been used to study the impact of climate change on crop yield potentials and
water use in the Rhine basin. WOFOST has also been incorporated in the European Crop
Growth Monitoring System (CGMS) of the MARS project (Monitoring Agriculture with
Remote Sensing).
Contacts for Kees van Diepen, Department of Land Evaluation Methods, The Winand Staring Centre for
Framework, Integrated Land, Soil and Water Research (SC-DLO), Marijkeweg 11/22 P.O. Box 125, 6700
Documentation, AC Wageningen, The Netherlands; Tel: +31.317.474230; e-mail: diepen@sc.dlo.nl.
Technical
Assistance
Page 4-5
WOFOST (cont.)
References Boogaard, H.L., C.A. van Diepen, R.P. Rötter, J.M.C.A. Cabrera, and H.H. van Laar. 1998.
User’s Guide for the WOFOST 7.1 Crop Growth Simulation Model and WOFOST Control
Center 1.5. DLO-Winand Staring Centre, Wageningen, Technical Document 52.
Eitzinger, J., M. Trnka, J. Hösch, Z. Žalud and M. Dubrovský. 2004. Comparison of CERES,
WOFOST and SWAP models in simulating soil water content during growing season under
different soil conditions. Ecological Modelling 171(3):223-246.
Supit, I., A.A. Hooijer, and C.A. van Diepen (eds.). 1994. System Description of the WOFOST
6.0 Crop Simulation Model Implemented in CGMS. Volume 1: Theory and Algorithms. Catno:
CL-NA-15956-EN-C. EUR 15956, Office for Official Publications of the European
Communities, Luxembourg.
Page 4-6
Description The ACRU model has its origins in a catchment evapotranspiration based study carried out in
Natal in the early 1970s. The agrohydrological component of ACRU first came to the fore
during research on an agrohydrological and agroclimatological atlas for Natal. ACRU is a
multipurpose model that integrates water budgeting and runoff components of the terrestrial
hydrological system with risk analysis, and can be applied in crop yield modeling, design
hydrology, reservoir yield simulation and irrigation water demand/supply, regional water
resources assessment, planning optimum water resource allocation and utilization, climate
change, land use and management impacts, and resolving conflicting demands on water
resources. The ACRU model uses daily multilayer soil water budgeting and has been developed
essentially into a versatile total evaporation model. It has therefore been structured to be highly
sensitive to climate and to land cover/use changes on the soil water and runoff regimes, and its
water budget is responsive to supplementary watering by irrigation, to changes in tillage
practices, or to the onset and degree of plant stress.
Appropriate Use ACRU can be used at the catchment or subcatchment level to study the impact of climate
change and enhanced CO2 conditions on crop yield and water balances.
Scope ACRU can operate as site-specific or as a lumped small catchments model. However, for large
catchments or in areas of complex land uses and soils, ACRU can operate as a distributed cell-
type model.
Key Output Crop yield and water balances (including irrigation needs, runoff, etc.) for different climate
change scenarios.
Key Input Weather data: maximum and minimum temperatures, rainfall. Catchment: location, area,
configuration, altitude. Other data: land cover, soil properties (texture, depth).
Ease of Use For trained hydrologists and agronomists.
Training Required No formal training required, but advanced knowledge of plant and soil processes as well as
hydrology is needed.
Training Available Training and support is available from the School of Bioresources Engineering and
Environmental Hydrology, University of Natal, Pietermaritzburg, South Africa.
Requirements
Documentation Smithers, J. and R. Schulze. 1995. ACRU: Hydrological Modelling System . User Manual
Version 3. Available at: http://www.beeh.unp.ac.za/acru.
Applications ACRU has been used to assess the potential impact of elevated CO2 and temperature levels and
possible changes in precipitation and potential evaporation on crop and runoff production in
southern Africa. The model has also been used to study shifts in maize production regions in
southern Africa as a consequence of global climate change. A version of ACR linked to the
CERES Maize model was used to simulate possible changes in maize production under different
fertilizer scenarios over southern Africa.
Contacts for Professor Roland E Schulze. School of Bioresources Engineering and Environmental
Framework, Hydrology, University of Natal, Private Bag X01, Scottsville 3209, Pietermaritzburg, South
Documentation, Africa; Tel: 033.260.5490; e-mail: schulzeR@nu.ac.za.
Technical
Assistance
Page 4-7
ACRU (Agricultural Catchments Research Unit) (cont.)
References Schulze, R.E., G. Kiker, and R.P. Kunz. 1993. Global climate-change and agricultural
productivity in Southern Africa. Global Environmental Change 3:330-349.
Schulze, R. 1989. ACRU: Background, Concepts and Theory. Report 35, Agricultural
Catchments Research Unit, Department of Agricultural Engineering, University of Natal,
Pietermaritzburg, South Africa.
Tarboton, K.C. and R.E. Schulze. 1991. The ACRU modeling system for large catchment water
resources management. Int. Assoc. Hydrol. Sci. Publ. 201:219-232.
Page 4-8
Description The CENTURY version 5 agroecosystem model is the latest version of the soil organic model
developed by Parton et al. (1987). This model simulates C, N, P, and S dynamics through an
annual cycle over time scales of centuries and millennia. The producer submodel may be a
grassland/crop, forest or savanna system, with the flexibility of specifying potential primary
production curves representing the site-specific plant community. CENTURY was especially
developed to deal with a wide range of cropping system rotations and tillage practices for
system analysis of the effects of management and global change on productivity and
sustainability of agroecosystems. Note: CENTURY is also described under terrestrial
vegetation.
Appropriate Use To study the impact of climate change on net primary production (crops, pastures, forests) as
well as carbon and nutrient dynamics (including carbon sequestration), and to explore adaptive
agricultural and natural resource management options (tillage, fertilizer, different species and
sequences, etc.).
Scope Site-specific but has been used at watershed, drainage basin, and regional scales using GIS.
Key Output Changes in soil carbon and nutrient balances, as well as in crop, pasture and forest production,
for different climate change scenarios.
Key Input Monthly average maximum and minimum air temperature; monthly precipitation; soil texture;
plant nitrogen; phosphorus and sulfur content; lignin content of plant material; atmospheric and
soil nitrogen inputs; initial soil carbon; nitrogen (phosphorus and sulfur optional).
Ease of Use For trained agronomists and ecologists. Requires advanced knowledge of soil and plant growth
processes.
Training Required CENTURY basic training requires at least 1-2 weeks to acquire minimum skills to conduct
simple simulations.
Training Available Training is offered at NREL, Colorado State University (see Contacts below).
Computer PC-based stand alone version, Linux cluster for regional simulations.
Requirements
Documentation http://www.nrel.colostate.edu/projects/century5/.
http://www.nrel.colostate.edu/projects/century5/reference/index.htm.
Applications CENTURY has been used in the Loch Vale Watershed Project, a long-term research program
designed to assess the effect of global climate change on the Front Range of the Colorado
Rockies. Specifically, CENTURY was used to assess the abiotic and biotic controls on forest
distribution and productivity as a basis for assessing potential vegetation change for projected
climate scenarios.
Contacts for Dr William Parton, NREL at Colorado State University, 1499 Campus Delivery Fort Collins,
Framework, CO 80523-1499, USA; Tel: 970.491.1987; e-mail: billp@nrel.colostate.edu.
Documentation, Cindy Keough, Natural Resource Ecology Laboratory, Colorado State University, Fort Collins,
Technical CO 80523-1499 USA; Tel: 970.491.2195; Fax: 970.491.1965;
Assistance e-mail: cindyk@nrel.colostate.edu.
Page 4-9
Process Soil and Crop Models: CENTURY (cont.)
References See http://nrel.colostate.edu/projects/century5/reference/html/bibliography.htm#parton1987 for
more references.
Hall, D.O., J.M.O. Scurlock, D.S. Ojima, and W.J. Parton. 2000. Grasslands and the global
carbon cycle: Modelling the effects of climate change. In The Carbon Cycle. T.M.L. Wigley
and D.S. Schimel (eds.). Cambridge University Press, Cambridge, UK, pp. 102-114.
Kelly, R.H., W.J. Parton, G.J. Crocker, P.R. Grace, J. Klír, M. Körschens, P.R. Poulton, and
D.D. Richter. 1997. Simulating trends in soil organic carbon in long-term experiments using the
Century model. Geoderma 1258.
Melillo, J.M., J. Borchers, J. Chaney, H. Fisher, S. Fox, A. Haxeltine, A. Janetos, D.W.
Kicklighter, T.G.F. Kittel, A.D. McGuire, R. McKeown, R. Neilson, R. Nemani, D.S. Ojima, T.
Painter, Y. Pan, W.J. Parton, L. Pierce, L. Pitelka, C. Prentice, B. Rizzo, N.A. Rosenbloom, S.
Running, D.S. Schimel, S. Sitch, T. Smith, and I. Woodward. 1995. Vegetation/ecosystem
modeling and analysis project: comparing biogeography and biogeochemistry models in a
continental-scale study of terrestrial ecosystem responses to climate change and CO2 doubling.
Global Biogeochemical Cycles 9:407-437.
Ojima, D.S., W.J. Parton, D.S. Schimel, T.G.F. Kittel, and J.M.O. Scurlock. 1993. Modeling the
effects of climatic and CO2 changes on grassland storage of soil C. Water, Air, and Soil
Pollution 70:643-657.
Parton, W.J., D.S. Schimel, C.V. Cole and D.S. Ojima. 1987. Analysis of factors controlling soil
organic matter levels in Great Plains grasslands. Soil Science Society of America Journal
51:1173-1179.
Parton, W.J., D.S. Schimel, D.S. Ojima, and C.V. Cole. 1994. A general model for soil organic
matter dynamics: sensitivity to litter chemistry, texture and management. Pages 147-167 in
Bryant, R. B. and R.W. Arnold (eds.). Quantitative modeling of soil forming processes. SSSA
Spec. Publ. 39. ASA, CSSA and SSA, Madison, WI, USA.
Page 4-10
ORYZA 2000
Description ORYZA 2000 is the successor to a series of rice growth models. It is an update and integration
of the models ORYZA1 for potential production, ORYZA-W for water-limited production, and
ORYZA-N for nitrogen-limited production. The model combines several modules: aboveground
crop growth, evapotranspiration, nitrogen dynamics, soil-water balance, and others.
Appropriate Use To study the impact of climate change rice yields and to explore adaptive management options
(fertilizer, cultivar type, irrigation strategy, sowing date, etc.).
Scope Site-specific, but can be used at regional scales using GIS.
Key Output Rice yield for different climate change scenarios.
Key Input Daily climate data (irradiation or sunshine hours, minimum temperature, maximum temperature,
early morning vapor pressure, mean wind speed, and precipitation), soil properties, and crop
management.
Ease of Use For trained agronomists. Requires advanced knowledge of plant growth processes.
Training Required ORYZA 2000 training requires 1-2 weeks to acquire minimum skills to conduct simple
simulations.
Training Available Training is offered online at:
http://www.knowledgebank.irri.org/oryza2000/whgdata/whlstt0.htm
Requirements
Documentation Available at: http://www.knowledgebank.irri.org/oryza2000/.
Applications Detailed physiological analysis of field experiments, estimation of crop performance and crop
management optimization for a given biophysical environment (climate, soil), including
expected climate change, breeding and germplasm evaluation.
Contacts for Dr. B.A.M. Bouman, Crop, Soil and Water Sciences Division, International Rice Research
Framework, Institute (IRRI), DAPO Box 7777, Metro Manila, Philippines; e-mail: b.bouman@cgiar.org.
Documentation, H.H. van Laar, Crop and Weed Ecology Group, Wageningen University and Research Centre
Technical (WUR), P.O. Box 430, 6700 AK Wageningen, The Netherlands; e-mail: gon.vanlaar@wur.nl.
Assistance
References Bannayan, M., K. Kobayashi, H.-Y. Kim, M. Lieffering, M. Okada and S. Miura. 2005.
Modeling the interactive effects of atmospheric CO2 and N on rice growth and yield. Field
Crops Research 93(2-3):237-251.
Bouman, B.A.M., M.J. Kropff, T.P. Tuong, M.C.S. Wopereis, H.F.M. ten Berge, and H.H. Van
Laar. 2001. ORYZA2000: Modeling Lowland Rice. International Rice Research Institute, Los
Baños, Philippines and Wageningen University and Research Centre, Wageningen, The
Netherlands.
Matthew, R.B., D. Bachelet, and H.H. van Laar (eds.). 1995. Modeling the Impact of Climate
Change on Rice Production in Asia. CAB International, Wallingford, United Kingdom.
Page 4-11
Information and Decision Support System for Climate Change Studies in South East
South America (IDSS-SESA Climate Change)
Description The IDSS SESA is based on the linking and integration of (a) maps and associated databases
of soils, weather, land use, and political divisions; (b) national and regional statistics
(production, socioeconomic, demographic); (c) prices of inputs and products; (d) remotely
sensed information (crops, pastures, natural resources, climate); (e) simulation models of crop,
pasture and forest growth, development and production (DSSAT, APSIM); (f) climate change
scenarios (GCMs, RCMs, and statistical methods); (g) a statistical package for analyzing
climate data and generating synthetic weather (LARS and MARKSIM); (h) methods for land
use evaluation and for defining land use feasibility classes; (i) a simulation model of soil
carbon and nutrient dynamics (CENTURY); (j) tools for agricultural applications of global
positioning systems (GPS); and (k) geographic information systems (GIS) to process and
analyze maps and databases and to generate information that can be easily understandable and
applied by agricultural stakeholders. Climate change scenarios are defined using three
methods: (1) studying the changes in climate during the last 100 years and projecting those
changes for the near future; (2) using sensitivity analyses, i.e., modifying observed weather
data with combinations of changes in temperatures max and min and rainfall and generating
synthetic weather data; and (3) using GCMs to estimate monthly anomalies of weather
(temperatures and rainfall) or atmospheric variables (SLP, geopotential at 850 mb, etc.) and
modifying the observed climatic data.
Appropriate Use To study the impacts of possible climate change scenarios on different agricultural production
systems (livestock, crops, mixed) and on the natural resource base, and explore adaptive
technological options (crop/pasture management, input use, mixes of crop and pasture types).
Scope Agro-ecological zone level (national, regional).
Key Output Changes in agricultural productivity and economic results, variation in agricultural and
environmental risks, etc., for different climate change scenarios. Produces outputs (e.g., maps,
tables, etc.) in formats easily understood by non-specialist users such as policy makers and
farmers.
Key Input Soils, weather, and land use data; national and regional statistics of crop/livestock production;
prices of inputs and products.
Ease of Use For trained agronomists.
Training Requires training on the basic tools included in the IDSS: simulation models, GIS, weather
Required generators, and statistical analyses.
Training Training is available for some of the IDSS components (DSSAT, APSIM, CENTURY).
Available
Requirements
Documentation http://sedac.ciesin.columbia.edu/aiacc/methods.html.
Applications Used in INIA-Uruguay, INTA-Argentina, IAPAR-Brazil, EMBRAPA-Trigo, Brazil, and the
AIACC project LA 27.
Page 4-12
Information and Decision Support System for Climate Change Studies in South East
South America (IDSS-SESA Climate Change) (cont.)
Contacts for Walter E. Baethgen IFDC-Uruguay, Juan M. Perez 2917 Apt. 501, Montevideo, Uruguay;
Tools, Tel: 598.2.712.0838; e-mail: wbaethgen@undpfim.org.uy.
Documentation, Agustín Giménez, INIA La Estanzuela, Colonia, Uruguay 70000; Tel: 598.574.8000.
Technical Graciela Magrin, INTA Castelar, Buenos Aires; Tel: 54.11.4621.1684.
Assistance
References Baethgen, W.E., R. Faría, A. Giménez, and P. Wilkens. 2001. Information and decision
support systems for the agricultural sector. In Proceedings — Third International Symposium
on Systems Approaches for Agricultural Development, Lima, Peru, 8-10 November 1999 [CD-
ROM computer file]. International Potato Center (CIP), Lima, Peru.
Page 4-13
Decision Support Systems Linking Agro-Climatic Indices with GCM-Originated Climate
Change Scenarios
Description Key agro-climatic indices for the crops under study are defined (e.g., crop heat units, growing
degree-days, effective growing degree-days, precipitation deficits, seasonal crop coefficients of
water demand). Typically these indices are calculated using gridded monthly observed climatic
normals for average daily maximum and minimum air temperature, total precipitation, and solar
radiation. Climate change scenarios are then obtained from the outputs of GCMs and different
statistical packages are used for interpolating and downscaling the results (e.g., PRISM,
ANUSPLIN). The agro-climatic indices are then recalculated for the climate change scenarios,
and adaptive management options are explored (different crop species, different cultivars,
sowing dates, etc.).
Appropriate Use To study expected shifts in the agro-climatic zones for different crop types under possible
climate change scenarios, and to explore the adaptive ability of crop types and management
options (planting date, cultivar types).
Scope Agro-ecological zone level (national, regional).
Key Output Changes in crop yields, shifts in agro-ecological zones, relative to different climate change
scenarios.
Key Input Gridded observed climate data, agro-climatic indices for different crop species and cultivars.
Ease of Use For trained agronomists and agro-climatologists.
Training Requires knowledge of agro-climatic indices, and methods for climatic data interpolation and
Required downscaling (e.g., ANUSPLIN, PRISM).
Training See Contacts below.
Available
Requirements
Documentation PRISM: Daly, C., R.P. Neilson, and D.L. Phillips. 1994. A statistical-topographic model for
mapping climatological precipitation over mountainous terrain. Journal of Applied Meteorology
33:140-158.
ANUSPLIN: Information on ANUSPLIN Version 4.3 available at
http://cres.anu.edu.au/outputs/anusplin.php#1
Applications Used by Canadian Climate Change Action Projects.
Contacts for Climate Change Impacts & Adaptation Directorate, Natural Resources Canada;
Tools, e-mail: adaptation@nrcan.gc.ca,
Documentation, Dr. A. Bootsma, Agriculture and Agri-Food Canada; Tel: 613.759.1526;
Technical e-mail: bootsmaa@em.agr.ca.
Assistance Dr. D. Neilsen, Agriculture and Agri-Food Canada; Tel: 250.494.6417;
e-mail: NeilsenD@em.agr.ca.
Page 4-14
Decision Support Systems Linking Agro-Climatic Indices with GCM-Originated Climate
Change Scenarios (cont.)
References Bootsma1, S.G. and D.W. McKenney. 2001. Adaptation of Agricultural Production to Climate
Change in Atlantic Canada. Report for Climate Change Action Fund Project A214.
Neilsen, D., S. Smith, W. Koch, G. Frank, J. Hall, and P. Parchomchuk. 2001. Impact of
Climate Change on Crop Water Demand and Crop Suitability in the Okanagan Valley, BC.
Technical Bulletin 01-15. Pacific Agri-Food Research Centre, Summerland, British Columbia,
Canada. http://adaptation.nrcan.gc.ca/projdb/pdf/4_e.pdf.
Page 4-15
Description Computer and numerical models require assessment of system forces and responses to
adaptation in order to understand the context for the variables being considered. This model
illustrates the endogenous and exogenous forces that influence adaptation responses and
classifies those responses into various farm and regional level responses. The biophysical
environment, government programs, economic conditions, and other forces are the exogenous
considerations and factors such as the attributes of the farmer, the farm family, and the farm,
including their experiences, perceptions, location, scale, and finances, are the endogenous
considerations made in this model. Farm responses include tactical and strategic decisions.
Appropriate Use Provides structure and hypotheses for numerical impact assessments in agriculture;
particularly for developed economies.
Scope All locations; farm and regional level analyses of commercial farming systems.
Key Output Classification of range of forces and responses to adaptation to climatic variation.
Key Input System and human agency influences on adaptation responses.
Ease of Use Easy.
Training Required No formal training required, although an understanding of farming systems is an asset.
Documentation Smit, B., D. McNabb, and J. Smithers. 1996. Agricultural adaptation to climatic variation.
Applications Applied in research of corn hybrid adaptation in Ontario, Canada, and in the University of
Guelph’s Farming Systems Research.
Contacts for Dr. Barry Smit and Dr. John Smithers, University of Guelph, Department of Geography,
Tools, Guelph, ON N1G 2W1 Canada; Tel: (519) 824-4120 ext. 3279; Fax: (519) 837-2940;
Documentation, e-mail: bsmit@uoguelph.ca.
Technical D. McNabb, Carleton University, Impact Assessment Centre, Ottawa, ON K1S 5B6 Canada;
Assistance Tel: 613.520.2547; Fax: 613.520.2551.
References Smit, B., D. McNabb, and J. Smithers. 1996. Agricultural adaptation to climatic variation.
Page 4-16
Description RRI illustrates the overall level of risk a farmer faces in light of various cropping decisions
and climatic variation. In the study referenced here, various levels of risk are categorized and
rated and then the proportion of the total farm area planted to each category of risk is
calculated. The index is determined on the basis of the proportion of relatively risky versus
relatively conservative crops planted.
Appropriate Use To illustrate the relative risk positions of individuals (before or after adaptation) and begin to
explain changes in cropping practices.
Scope All locations; farm or regional level analyses.
Key Output A relative risk index.
Key Input Data on annual variations in cropping practices.
Ease of Use Easy.
Training Required No formal training required, although an understanding of various agronomic practices is an
asset.
Documentation Smit, B., R. Blain, and P. Keddie. 1997. Corn hybrid selection and climatic variability:
Gambling with nature? The Canadian Geographer 41(4):429-438.
Applications Used in research of commercial cash crop farming in Ontario, Canada.
Contacts for Dr. Barry Smit, University of Guelph, Department of Geography, Guelph, ON N1G 2W1
Tools, Canada; Tel: 519.824.4120 ext. 3279; Fax: 519.837.2940; e-mail: bsmit@uoguelph.ca.
Documentation,
Technical
Assistance
Page 4-17
Description A methodology using descriptive statistics to summarize data on government supports for
extreme weather and climate variability in agriculture. Government sponsored programs such
as Crop Insurance and Ad hoc Disaster Payment programs are considered in terms of their
changing value over time.
Appropriate Use To describe and evaluate the sustainability of government support programs that are provided
in response to climate variability and weather extremes.
Scope All locations; provincial and national level analyses.
Key Output Value of government programs providing payments to farmers directly related to climatic
variability.
Key Input Farm income and government support data.
Ease of Use Easy.
Training Required No formal training required, although an understanding of government support programs,
farming systems and descriptive statistics is an asset.
Computer Spreadsheet software package.
Requirements
Documentation See Smit, B., 1994, in References below.
Applications Used by the Environmental Adaptation Research Group of Environment Canada, Ontario
Ministry of Agriculture, Food and Rural Affairs and Canada’s National Implementation
Strategy.
Contacts for Dr. Barry Smit, University of Guelph, Department of Geography, Guelph, ON N1G 2W1
Tools, Canada; Tel: 519.824.4120 ext. 3279; Fax: 519.837.2940; e-mail: bsmit@uoguelph.ca.
Documentation,
Technical
Assistance
References Smit, B. 1994. Climate, compensation and agriculture. In Improving Responses to
Atmospheric Extremes: The Role of Insurance and Compensation. Workshop Proceedings.
J. McCulloch and D. Etkin (eds.).The Climate Institute, Environment Canada, Toronto.
Page 4-18
AgroMetShell
Description AgroMetShell is an integrated toolbox of several software packages which helps professionals
in National Agrometeorological Services, agronomic research and food security units etc. to
assess the impact of climatic conditions on crops, to analyze climate risks and to perform
regional crop forecasting using statistical and crop modelling approaches. It allows an
integrated analysis of ground data and low resolution satellite information under a common
interface.
Appropriate Use Applicable to the assessment of current and future climatic impacts on crops, derivation of
management options for the growing season possible.
Scope All locations; agricultural sector.
Key Output Crop-specific soil water balance, agronomic/agrometeorological indicators to assess crop
conditions, e.g. crop water consumption (potential evapotranspiration), rainfall probabilities,
growing season characteristics.
Key Input Climate, crop and soils data sets.
Ease of Use Relatively easy to use for qualified experts with appropriate background.
Training Required Yes.
Training Available Included in CM Box training modules offered by FAO.
Computer PC Windows 98 and above.
Requirements
Documentation http://www.fao.org/nr/climpag/aw_6_en.asp
http://www.hoefsloot.com/agrometshell.htm
Applications National Early Warning Systems for Food Security. National Agrometeorological Services.
See also: http://www.hoefsloot.com/agrometshell.htm.
Contacts for Tools, René Gommes, Michele Bernardi; Environment, Climate Change and Bioenergy Division
Documentation, (NRC), FAO, Viale delle Terme di Caracalla, 00153 Rome, Italy;
Technical e-mail: Rene.Gommes@fao.org, Michele.Bernardi@fao.org.
Assistance
Cost No cost to obtain software and documentation.
References http://www.hoefsloot.com/agrometshell.htm
http://www.fao.org/nr/climpag/aw_6_en.asp
Page 4-19
Description The agroclimatic water stress mapping tool provides a global, near real-time warning of
current and future agricultural emergencies indicating areas where excess or deficit rainfall is
likely to produce serious damage to rainfed agriculture or pastures. Furthermore, the tool can
use seasonal forecast data to produce maps identifying the probability of water deficit or
surplus conditions in the coming months.
Appropriate Use Global assessment of current and future areas with excess and deficit rainfall allows early
warning for the on-going growing season.
Scope Global, agricultural sector.
Key Output Digital water stress maps by comparing actual and average monthly precipitation digital maps
at 0.5° of resolution during the periods when agricultural activities are more “sensitive” to
water stress.
Key Input Long-term average rainfall. Long-term temperature and potential evapotranspiration to identify
the regions with active growing seasons. Real-time rainfall data provided by the German
Weather service (DWD). Real-time seasonal forecast provided by DEMETER project.
Ease of Use Centralized server driven by FAO, the water stress maps can be downloaded from the FAO
website (see documentation). There is no stand-alone version available.
Computer None.
Requirements
Documentation See http://www.fao.org/nr/climpag/hot_2_en.asp.
Applications Drought and flood monitoring over agricultural areas. Currently, internal use by FAO for
global assessments of water stress.
See also: http://www.fao.org/nr/climpag/hot_2_en.asp.
Documentation, (NRC), FAO, Viale delle Terme di Caracalla, 00153 Rome, Italy; e-mails:
Technical Rene.Gommes@fao.org, Michele.Bernardi@fao.org
Assistance
Cost None.
References See http://www.fao.org/nr/climpag/hotspots/maps_en.asp.
Page 4-20
Description New_LocClim (Local Climate Estimator) is a software tool for spatial interpolation of
agroclimatic data. It can estimate climatic conditions at locations for which no observations are
available and provides nine different spatial interpolation methods (IDW, kriging, Shepard,
thin-plate splines, etc.). It allows users to optimize interpolation by investigating interpolation
errors and the influence of different settings on the results. Users can also interpolate their own
data and prepare grid maps at any spatial resolution.
Appropriate Use New_LocClim is appropriate for the preparation and investigation of agroclimatic maps from
point to regional scale based on the FAOClim database or user data. The tool determines the
average growing season as the period during a year when precipitation exceeds half the
potential evapotranspiration. However, the user can also modify this definition.
Scope All scales, agricultural sector.
Key Output Climate maps at any spatial resolution of the average monthly climate conditions (8 variables).
Export of data for further processing. Display graphs showing the annual cycle of monthly
climate and the crop calendar.
Key Input Climate data (from user or from FAOClim database).
Ease of Use Relatively easy to use for qualified experts with appropriate background. On-line help is
available.
Training Required No.
Requirements
Documentation FAO. 2005. New_LocClim CD-ROM. Available at
http://www.fao.org/nr/climpag/pub/en3_051002_en.asp.
Applications All applications requiring climatic data. Agricultural planning.
Assistance
Cost No cost.
References FAO. 2005. New_LocClim (incl. CD-ROM), Environment and Natural Resources Working
paper No. 20. Available at http://www.fao.org/nr/climpag/pub/en3_051002_en.asp.
Page 4-21
FAOClim 2.0
Description FAOClim 2.0 is a global agroclimatic database containing data from almost 32,000 stations for
up to 14 observed and computed agroclimatic parameters. The database includes both long-
term averages (1961-90) and time series for rainfall and temperatures. The database is linked to
real-time daily meteorological data flow and allows users to browse and retrieve basic data.
The user can select data by geographic area, time period and parameter and can export and
visualize the information in map and graph form.
Appropriate Use The agroclimatic database is a valuable tool to analyze the variability of agroclimatic
parameters and serves as a basis for risk studies. FAOClim provides a crucial resource in
understanding how climate is changing and in establishing the baselines from which climate is
being perturbed.
Scope Global.
Key Output Agroclimatic parameters for selected regions and time periods.
Key Input User can add data for additional stations.
Ease of Use Easy to use. On-line help is available.

Requirements
Documentation FAOClim 2.0 Agroclimatic Database CD-ROM. Available at
http://www.fao.org/nr/climpag/pub/en1102_en.asp.
Applications All applications requiring climatic data. Agricultural planning and climate risk assessment.
Assistance
Cost No cost.
References FAO. 2001. FAOClim 2.0. Agroclimatic Database CD-ROM + Users Manual (72 pp.)
Environment and Natural Resources Working paper No. 5. Available at
http://www.fao.org/nr/climpag/pub/en1102_en.asp.
Page 4-22
CLIMWAT 2.0
Description CLIMWAT 2.0 is an extensive climatic database of more than 5,000 stations worldwide which
is directly linked to the irrigation model AQUACROP. The combination of both allows users
to calculate crop water requirements, irrigation supply and irrigation scheduling for various
crops for a range of climatological stations.
Appropriate Use CLIMWAT, in combination with AQUACROP, can be used for planning and management of
irrigated and rainfed agriculture.
Key Output Climate data: maximum and minimum temperature, mean daily relative humidity, sunshine
hours, windspeed, precipitation and calculated values for reference evapotranspiration and
effective rainfall as input data for AQUACROP.
Key Input FAOClim database.
Ease of Use Easy to use. On-line help is available.

Requirements
Documentation See http://www.fao.org/nr/water/infores_databases_climwat.html.
Applications To be used in conjunction with CropWat software. See
http://www.fao.org/nr/water/infores_databases_cropwat.html.
Assistance
Cost No cost.
References See http://www.fao.org/nr/water/infores_databases_climwat.html.
Page 4-23
CM Box
Description A national turn-key crop monitoring system, the CM Box is a training package for FAO crop
monitoring and forecasting software. Interested countries receive a combination of training,
hardware and software customized for local use, as well as the real-time data required to
operate the system in-country.
The CM Box is fed in real time with weather, satellite and crop information and generates a set
of indicators that are relevant for food security. The training covers the operation of a national
crop yield monitoring and forecasting system in a food security context, in particular the
interpretation of the maps and other outputs produced by the various tools.
Appropriate Use It strengthens the capacity of national experts to analyze weather data and to assess their
current and future impact on crop production and food security. CM Box consists of individual
modules which countries can select.
Key Output Output of the software tools: indicators related to food security as text, maps and tables by
provinces or districts.
Output of the training:

Trainees can prepare crop and weather reports for the national food security system.
Trainees are capable of operating the software independently, including the input of crop and
weather data and the integration of ground and satellite information.
Key Input National datasets prepared by the trainees before the training.
Training Required It is part of the package.
Training Available Yes.
Requirements
Documentation CM Box User Guide. Available at http://www.fao.org/nr/climpag/aw_6_en.asp.
Applications Tailored training sessions performed in several countries, e.g. Cambodia, Congo DRC,
Ethiopia, Malawi, Lao PDR.
Assistance
Cost Software used is free (see AgroMetShell). The cost of training sessions varies according to
local needs.
References CM Box User Guide:
http://www.fao.org/nr/climpag/aw_6_en.asp
Page 4-24
Description CLOUD developed a proto-type multi-agent simulation (MAS) model that is coupled to
information about farming activity and climate data. MAS is a general computational
technique that can be used for simulating societies and their interactions with the environment.
It is a processed-based modelling approach arising from artificial intelligence research:
Individual agents in a given system are identified and sets of behavioural rules are used to
evolve the system state forward in time, taking into account the interactions between agents
and the feedbacks between agent actions and the changes in state of their environment. For
social-system models, agents may represent individual people, households, social groups or
larger institutions. Environmental models can be coupled to the MAS in a variety of ways,
depending on the type of physical or ecological system under consideration. In a climate
context, such a model forms a test-bed for hypotheses about how environmental change and its
perception within society may affect both adaptation to change and the future climate, in much
the same way that a physical model allows testing of hypotheses about the physics of the
atmosphere and ocean.
Appropriate Use The model is as yet exploratory in nature and not sufficiently sophisticated to use for policy
advice. For models that examine forecasting and climate, the CLOUD model has been applied
to small subsistence farming villages in dryland farming regions where some seasonal forecast
skill might be available.
Scope The model focus was originally Southern Africa and specific to a single village. With
appropriate social survey, crop and climate data it could be applied to other regions. However,
MAS itself has in principle much broader applicability for social simulation.
Key Output An exploratory model for examining “What if” scenarios. In the case of CLOUD, how belief in
seasonal forecasts might affects crop returns and benefit (or otherwise) subsistence farmers.
Key Input For forecast simulations, time series rainfall and temperature data at monthly resolution, crop
coefficients suitable for CROPWAT, social information regarding agricultural practice and
conditions under which crop choices are made, price and distribution information for crop
sales, and climate forecast skill information.
Ease of Use Requires expert programming knowledge in C++ or Java and experience in multi-agent
simulation.
Training Required See above.
Training Available None currently available.
Computer Platform- independent self-contained code. For single village simulations, any modern
Requirements computer has sufficient power to run the model.
Documentation Documentation is currently available as comments within the code.
Page 4-25
CLOUD (Climate Outlooks and Agent-based Simulation of Adaptation in Africa) (cont.)
Applications Subsistence farmers are particularly vulnerable to fluctuations in climate, particularly rainfall.
Seasonal, inter-annual and longer-term changes in availability of water all affect their ability to
survive. One way in which they might improve their circumstances would be to have access to
seasonal forecast information, so as to be able to anticipate the right crops to plant, both for
food and for marketing. Dry-land farmer success therefore depends on the availability of rain,
and on the prices they can get at market, both of which are also dependent on the climate.
The model was applied to two Southern African villages, Ha Thlaku, where adaptation of
practice to planting either maize or sorghum was examined (Ziervogel et al. 2005), and
Mangondi (Bharwani et al. 2005), where computer-aided knowledge-elicitation tools were
used to determine a set of strategies that the farmers could use to plant crops in a market
garden. An agent-based model was developed that captured these strategies and allowed us to
couple them to a crop model (CROPWAT) driven with rainfall and temperature derived from
140-year runs of the UK Met Office coupled climate model. The agents changed their
behaviour according to their memory of past climate, their interaction with other farmers, and
their belief in a seasonal forecast. The projects studied how these factors influenced the success
of the farming community as the climate varied over annual, decadal and longer timescales,
including the effect of changes in the accuracy of the seasonal forecasts.
Contacts for Tools, Dr. M. Bithell, Dept. of Geography, University of Cambridge, England (see
Documentation, www.geog.cam.ac.uk).
Technical
Assistance
Cost Software is regarded as pre-release at present. Future development envisages a MAS model
that will be freely available and open source.
References Bharwani, S., M. Bithell, T.E. Downing, M. New, R. Washington and G. Ziervogel. 2005.
Multi-Agent Modelling of Climate Outlooks and Food Security on a community Garden
Scheme in Limpopo, South Africa. Phil Trans. Roy. Soc. London Ser. B 360:2183-2194.
Bithell, M., J. Brasington and K. Richards. 2006. Discrete-element, individual-based and
agent-based models: tools for interdisciplinary enquiry in geography? Geoforum.
doi:10.1016/j.geoforum.2006.10.014.
Ziervogel, G., M. Bithell, R. Washington and T. Downing. 2005. Agent-based social
simulation: a method for assessing the impact of seasonal climate forecast applications among
smallholder farmers. Agricultural Systems 83:1-26.
Page 4-26
Description The Canadian Regional Agriculture Model (CRAM) is a sector (i.e. partial) equilibrium, static
model for Canadian agriculture written in General Algebraic Modeling System (GAMS, details
available at http://www.gams.com/). The model has approximately 2300 variables, and 1300
equations. It consists of a main file with small files that can be “called” when running the
model. The model is disaggregated across both commodities and space (55 crop regions and 10
livestock regions). The basic commodity coverage is grains and oilseeds, forage, beef, hogs,
dairy and poultry (horticulture is excluded). For crops, data in CRAM include: yield, areas,
cost of production, prices, quantity demanded, input requirements (price and quantity of
fertilizers, chemicals and fuels), repair costs, management practice (tillage, summerfallow
etc.). On the livestock side, data include: number of animals, input requirements (feed, forage,
pasture), variable costs, prices of live animals (steers, bulls, cows etc.), prices and quantity of
the different types of meat (high quality beef, low quality beef, veal, pork). Dairy (i.e. types of
milk and usage, butter, cream, etc.) and Poultry (chicken, turkeys, eggs.) data are also included
in CRAM. Other inputs include shipment cost of commodities to ports, and demand
information (price, quantity, and elasticities), population per province etc.
CRAM is a non-linear optimization model maximizing producer plus consumer surplus less
transport costs. A Positive Mathematical Programming (PMP) approach is applied to crops,
hogs and beef, and input demand, feed demand, crop area and livestock numbers. Through a
calibration process, the model duplicates the observed allocation of a fixed and allocable
resource (land) by positioning an unobserved marginal cost curve in a manner that ensures the
classic conditions for constrained profit maximization are obtained. The model is processed
through MINOS, that is, a general purpose nonlinear programming (NLP) solver. More
recently, experiments for more complex analysis have been done with CONOPT. Both solvers
are available under license (http://www.gams.com/sales/sales.htm ).
Appropriate Use The model currently reflects the baseline conditions for 2006 and 2010. Work is underway to
determine conditions for a longer baseline. The current CRAM model is static and is not
intended for dynamic application, although theoretically this could be possible.
Scope CRAM has a national coverage where there are agricultural activities in Canada
(Newfoundland and Labrador, Prince-Edward-Island, Nova Scotia, New Brunswick, Quebec,
Ontario, Manitoba, Saskatchewan, Alberta and British Columbia).
Key Output The key outputs are: Consumer and producer surplus (CPS) in dollar terms; crop areas;
livestock production; quantities demanded; exports and imports. The model also indicates
shifts (or needs) in land resources in optimizing the CPS, when analyzing the impact of a
policy (or a shock). It also generates information on net income changes between the baseline
and the scenario analysed (policy). Results are given at CRAM regions level, but can be
aggregated to reflect provincial and national impacts.
Key Input See Description, above.
The main sources for data are:

• Statistics Canada, for Census of Agriculture and various data.
• Agriculture and Agri-Food Canada, for the Medium Term Policy Baseline (internal
document)
• USDA, for international data
Other sources of data might be needed depending on the relevancy of the information.
Page 4-27
CRAM (Canadian Regional Agriculture Model) (cont.)
Ease of Use In general, medium level of effort is required and, with time, CRAM is easier to use. Because
most of the economists who use CRAM have the necessary background on microeconomics
theory, and in optimization theory, most of the effort is in learning GAMS language. A period
of up to six months would suffice to gain familiarity with the language and the CRAM model
itself. Furthermore, because 70 % of the raw series are available electronically, the data
transformation part of the work with CRAM might require a medium level, or less, of effort.
Training Required See above
Training Available There is no formal training available.
Computer A Pentium-based computer with a minimum of 512 MB is required. However, for more
Requirements complex analysis, 1GB is definitely better. The operating system used is Windows XP SP2
(for GAMS and solver requirement on various platforms, please see
http://www.gams.com/solvers/index.htm)
Documentation Description of the CRAM structure can be found in some of the early publications (such as
Webber et al, 1986). CRAM contains information on updates made, however this doesn’t
constitute a how-to manual for the models. There are on-going efforts with the CRAM Team
to develop a separate documentation that could fill (partially) the role of a manual.
GAMS documentation is available at http://www.gams.com/docs/document.htm.

Applications One of the first applications of CRAM was to look at the implications of the introduction of
medium quality wheat on the Prairies (1986). Since then it has been used to examine the
impact of the 1985 U.S. Food Security Act on the Canadian Grains sector (1988) and the
impact of direct government assistance programs on the beef and hogs sectors (1989).
CRAM has been employed within AAFC to examine the implications of the Canada-U.S.
Trade Agreement (CUSTA), the Multilateral Trade Negotiations (MTN) (1990), changing the
Western Grain Transportation Act (WGTA) (1991 and 1994) and licensing BST for dairy cows
(1990). It has been used for the environmental assessment of the crop insurance program
(1998) and return on research investment studies for wheat (1995), potatoes (1996), hogs
(1998), and forages (2000).
CRAM has been used to calculate greenhouse gas emissions of the agriculture sector (with the
Canadian Economic and Emissions Model for Agriculture, CEEMA, 2000-2004), to track the
environmental performance of the agriculture sector (through agri-environmental indicators),
and to assess the expanded use of biofuels (2000). Furthermore, CRAM is currently used in an
on-going analysis of climate change impacts and adaptation.
Contacts for Tools, Bob MacGregor, Chief, Agricultural & Environmental Policy Analysis, Agriculture and Agri-
Documentation, Food Canada, 930 Carling Avenue, room 689, Ottawa, Ontario, Canada K1A 0C9; Tel:
Technical 613.759.7196; e-mail: macgrbo@agr.gc.ca.
Assistance
Cost The incremental costs are for GAMS program and solver licences purchases. For the most up-
to-date information on costs, please consult http://www.gams.com/sales/sales.htm.
References Agriculture and Agri-Food Canada. 2000. Options Report – Reducing Greenhouse Gas
Emissions From Canadian Agriculture, Public Works and Government Services Canada.
Publication 2028/E, Ottawa, ON.
Agriculture and Ari-Food Canada. Agricultural Policies and Soil Degradation In Western
Canada: An Agro-ecological Economic Assessment (Reports 1-5 http://www2.agr.gc.ca).
Page 4-28
CRAM (Canadian Regional Agriculture Model) (cont.)
References Fox, G., G. Brinkman and G. Thomas. 1998. The Economic Benefits of Canadian Swine
continued Research. Agriculture and Agri-Food Canada, Ottawa, ON.
Giraldez, J., R.J. MacGregor, B. Junkins, R. Gill, I. Campbell, G.Wall, I. Shelton, G. Padbury
and B. Stephen. 1998. The Federal-Provincial Crop Insurance Program: An Integrated
Environmenal-Economic Assessment. Agriculture and Agri-Food Canada, Ottawa, ON.
Graham, J.D., B. Stennes, R.J. MacGregor, K. Meilke and G. Moschini. 1990. The Effects of
Trade Liberalization on Canadian Dairy and Poultry Sectors. Agriculture Canada, Working
Paper Number 3, Ottawa, ON.
Heigh, L. and B. Junkins. 2005. Quantitative Analysis of the Impact of Agricultural
Management Strategies on Environmental Indicators. Agriculture and Agri-Food Canada.
Horner, G.L., J. Corman, R.E. Howitt, C.A. Carter and R.J. MacGregor. 1992. The Canadian
Regional Agriculture Model – Structure, Operation and Development. Agriculture Canada,
Technical Report 1/92.
Huffman, E.. 2000. Soil cover by Crops and Residue, pp. 33-40 in T. McRae, C.A.S. Smith
and L.J. Gregorich (eds.), 2000 Environmental Sustainability of Canadian Agriculture: Report
of the Agri-Environmental Indicator Project. Agriculture and Agri-Food Canada, Ottawa, ON.
Klein, K.K., G. Fox, W.A. Kerr, S.N. Kulshreshtha and B. Stennes. 1991. Regional
Implications of Compensatory Freight Rates for Prairie Grains and Oilseeds. Agriculture
Canada Working Paper, Number 3, Ottawa.
Klein, K.K. and B. Freeze. 1995. Economics of Loss Avoidance Research on Wheat in
Canada. Report submitted to Research Branch, Agriculture and Agri-Food Canada, Ottawa,
ON.
Klein, K.K., B. Freeze and A.M. Wallbuger. 1995. Economic Returns to Yield Increasing
Research on Wheat in Canada, Report submitted to Research Branch. Agriculture and Agri-
Food Canada, Ottawa, ON.
Klein, K., D. Le Roy, A.Walburger, S. Clark, and E. Yiridoe. 2004. Revisions to Crop Module
in the Canadian Regional Agricultural Model (CRAM) - Final Report. Agriculture and Agri-
MacGregor, R.J. and J.D. Graham. 1988. The impact of Lower Grains and Oilseed Prices on
Canada’s Grain Sector: A Regional Programming Approach. Canadian Journal of Agricultural
Economics 36:51-67.
Oxley, J., B. Junkins, C. Dauncy and R.J. MacGregor. 1996. The Economic Benefits of Public
Potato Research in Canada, Report submitted to Research Branch. Agriculture and Agri-Food
Canada, Ottawa, ON.
Stennes, B.K., R.R Barichello and J.D. Graham. 1990. Bovine Somatotropin and the Canadian
Dairy Industry: An Economic Analysis. Agriculture Canada Working Paper No 1-91, Ottawa,
ON.
Thompsen, J.G., R. Ewing and K. Shukla. 2000. Documentation and Analysis of the Economic
Benefits of Public Research of Forages in Canada. Report submitted to Agriculture and Agri-
Webber, C.A., J.D. Graham and R.J. MacGregor. 1988. A Regional Analysis of Direct
Government Assistant Programs in Canada and Their impacts on the Beef and Hog Sectors,
Agriculture Canada, Working Paper No. 6/88, Ottawa, ON.
Webber, C.A., J.D. Graham and K.K. Klein. 1986. The Structure of CRAM: A Canadian
Regional Agricultural Model. Department of Agricultural Economics, University of British
Columbia.
Page 4-29
Process Crop Models: Decision Support System for Agrotechnology Transfer (DSSAT)
developed under the International Consortium for Agricultural Systems Applications
(ICASA)
Description The Decision Support System for Agrotechnology Transfer (DSSAT) is decision support
system that encompasses process-based computer models that predict growth, development
and yield as a function of local weather and soil conditions, crop management scenarios and
genetic information. The crops that are covered include grain cereals such as rice, wheat,
maize, barley, sorghum, and millet, grain legumes, such as soybean, peanut, dry bean,
chickpea, tuber crops, such as potato and cassava, cotton, sugarcane, vegetables, and various
other species. DSSAT also includes a basic set of tools to prepare the input data, as well as
application programs for seasonal, crop rotation and spatial analysis. The crop models not only
predict crop yield, but also resource dynamics, such as for water, nitrogen and carbon, and
environmental impact, such as nitrogen leaching. DSSAT includes an economic component
that calculates gross margins based harvested yield and byproducts, the price of the harvested
products, and input costs. The models use daily weather data, soil profile information, and
basic crop management data as input. Model outputs are normally compared with local
experimental data in order to evaluate model performance and determine the genetic
characteristics of local varieties.
Appropriate Use DSSAT can be used at a farm level to determine the impact of climate change on production
and potential adaptation practices that should be developed for farmers. It can also be used at a
regional level to determine the impact of climate change at different spatial scales, the main
consideration being availability of accurate input data.
Scope DSSAT can be used for any region across the world, as long as the local input data are
available. DSSAT has been distributed to over 2,000 users in more than 90 countries and has
been tested in most regions of the world.
Key Output Key outputs are the impact of climate change on crop production, resource use and
environmental pollution and management options for adaptation.
Key Input The crop simulation models require daily weather data, including maximum and minimum
temperature, solar radiation, and precipitation, a description of the soil physical and chemical
characteristics of the local, and crop management, including crop, variety, planting date, plant
spacing, and inputs such as fertilizer and irrigation.
Ease of Use DSSAT has been developed in Windows environment and can be easily used after installation.
For all crops considered (over 25 spp.), example data based on real experiments are provided.
For local implementation, access to weather and soil data, crop management information and
some crop measurements are needed.
Training Required For proper use, some training is required, especially with respect to the preparation of the input
files, determination of the genetic coefficients and for evaluation with local data. Familiarity
with the Windows operating system, spread sheet tools, and text editors is desirable.
Training Available The University of Georgia in collaboration with the International Consortium for Agricultural
Systems Applications (ICASA) offers a two week training workshop on DSSAT every other
year. In addition, training is often provided for groups of scientists in a country or region,
depending on available resources and research interests.
Computer DSSAT runs on a Pentium 4 or higher computer with at least 521 MByte of memory and 0.5
Requirements GByte of hard disk space. The preferred operating system is Windows XP.
Page 4-30
Process Crop Models: Decision Support System for Agrotechnology Transfer (DSSAT)
developed under the International Consortium for Agricultural Systems Applications
(ICASA) (cont.)
Documentation Hoogenboom, G., J.W. Jones, P.W. Wilkens, C.H. Porter, W.D. Batchelor, L.A. Hunt, K.J.
Boote, U. Singh, O. Uryasev, W.T. Bowen, A.J. Gijsman, A. du Toit, J.W. White, and G.Y.
Tsuji. 2004. Decision Support System for Agrotechnology Transfer Version 4.0 [CD-ROM].
University of Hawaii, Honolulu, HI.
Tsuji, G. Y., G. Hoogenboom, and P. K. Thornton [Editors]. 1998. Understanding Options for
Agricultural Production. Systems Approaches for Sustainable Agricultural Development.
Kluwer Academic Publishers, Dordrecht, the Netherlands. ISBN 07923-4833-8. 400 pp.
Applications The software has been used extensively in many different projects funded by US AID, US
EPA, Asian Pacific Network, and other organizations to determine the impact of climate
change on agricultural production and food security. It was also used by numerous countries
in the U.S. Country Studies Program, including Egypt, Japan, Kazakhstan, and Uruguay.
Contacts for Tools, For tools and documentation, please contact: International Consortium for Agricultural
Documentation, Systems Applications (ICASA), 2440 Campus Rd., Box 527, Honolulu, HI 96822, USA,
Technical e-mail: ICASA@ICASA.net; website; www.ICASA.net.
Assistance For technical assistance, please contact Dr. Gerrit Hoogenboom, Department of Biological and
Agricultural Engineering, the University of Georgia, Griffin, Georgia 30223, USA;
e-mail: Gerrit@uga.edu.
Cost The cost of the software is $195+ shipping expenses.
The registration costs for attending a training workshop are $1,500. Additional costs include
hotel and per diem, and travel to and from the workshop.
References Alexandrov, V.A., and G. Hoogenboom. 2000. The impact of climate variability and change
on major crops in Bulgaria. Agricultural and Forest Meteorology 104(4):315-327.
Alexandrov, V.A., and G. Hoogenboom. 2000. Vulnerability and adaptation assessments of
agricultural crops under climate change in the Southeastern USA. Theoretical and Applied
Climatology 67:45-63.
Baethgen, W. E. 1997. Vulnerability of the agricultural sector of Latin America to climate
change. Climate Research 9(1-7).
Hatch, U., S. Jagtap, J. Jones, and M. Lamb. 1999. Potential effects of climate change on
agricultural, water use in the southeast US. Journal of the American Water Resources
Association 35: 1551-1561.
Iglesias, A., Rosenzweig, C., and Pereira, D. 2000. Agricultural impacts of climate change in
Spain: Developing tools for a spatial analysis. Global Environmental Change 10:69-80.
Jones, J.W., G. Hoogenboom, C.H. Porter, K.J. Boote, W.D. Batchelor, L.A. Hunt, P.W.
Wilkens, U. Singh, A.J. Gijsman, and J.T. Ritchie. 2003. DSSAT Cropping System Model.
European Journal of Agronomy 18:235-265.
Jones, P.G., and P.K. Thornton. 2003. The potential impacts of climate change on maize
production in Africa and Latin America in 2055. Global Environmental Change13:51-59.
Mearns, L. O., T. Mavromatis, E. Tsvetsinskaya, C. Hays, and W. Easterling. 2001.
Comparative responses of EPIC and CERES crop models to high and low spatial resolution
climate change scenarios. Journal of Geophysical Research 104(d4): 6623-6646.
Tsuji, G. Y., G. Hoogenboom, and P. K. Thornton [eds.]. 1998. Understanding Options for
Agricultural Production. Systems Approaches for Sustainable Agricultural Development.
Kluwer Academic Publishers, Dordrecht, the Netherlands. ISBN 07923-4833-8. 400 pp.
White, J.W, G. Hoogenboom, and L.A. Hunt. 2005. A structured procedure for assessing how
crop models respond to temperature. Agronomy Journal 96(2):426-439.
Page 4-31
Description GAPS is a dynamic DOS or Windows-based simulation software package of the soil-plant-
atmosphere continuum, with crop management explicit in the model. It can simulate a sequence
of crops and climates in a single simulation run. Used to examine the influence of climate on
different aspects of crop management (e.g., the effects of climate variability on the number of
field-days for getting equipment into fields).
Appropriate Use For use in research and teaching the principles and practice of dynamic simulation modeling of
the soil-plant-atmosphere system.
Scope All locations; agricultural sector; site-specific, although can be extrapolated using GIS to a
national level.
Key Output Crop yield and yield components.
Key Input Data on the site’s soils, climate, and management.
Ease of Use High skill-level and time commitment required to prepare and run GAPS.
Training Required Requires extensive training in crop management and computer modeling.
Training Available Self-instruction using manual.
Computer Any PC that uses DOS or Windows 95 (or better). A batch version for large numbers of
Requirements repetitive simulations is available.
Documentation Buttler, I.W. and S. Riha. 1989. GAPS: A General Purpose Simulation Model of the Soil-Plant-
Atmosphere System, Version 3.1. User’s Manual. Dept. of Agronomy, Cornell University,
Ithaca, NY.
Applications Used to examine farm-level impacts of climate change on agriculture in the midwestern U.S.
Contacts for Tools, Dr. Susan J. Riha, Dept. of Soil, Crop, and Atmospheric Sciences, Cornell University, 140
Documentation, Emerson Hall, Ithaca, NY 14853 USA; Tel: +1.607.255.6143; e-mail: sjr4@cornell.edu.
Technical
Assistance
Cost No cost for model.
References Kaiser, H., S. Riha, D. Wilks, D. Rossiter, and R. Sampath. 1993. A farm-level analysis of
economic and agronomic impacts of gradual climate warming. American Journal of
Agricultural Economics 75:387-398.
Page 4-32
Description EPIC is an IBM, Macintosh, or Sun based generalized crop model that simulates daily crop
growth on a hectare scale. Like most process plant growth models, it predicts plant biomass by
simulating carbon fixation by photosynthesis, maintenance respiration, and growth respiration.
Several different crops may be grown in rotation within one model execution. It uses the
concept of light-use efficiency as a function of photosynthetically available radiation (PAR) to
predict biomass. EPIC has been modified to simulate the direct effects of atmospheric carbon
dioxide on plant growth and water use. Crop management is explicitly incorporated into the
model.
Appropriate Use This approach is useful for evaluating a limited number of agronomic adaptations to climate
change, such as changes in planting dates, modifying rotations (i.e., switching cultivars and crop
species), changing irrigation practices, and changing tillage operations. The parameter files are
extremely sensitive to local conditions and EPIC can give grossly misleading results when
relying on default settings as it is being tailored to different locations and cropping systems.
Scope All locations; agricultural; site-specific.
Key Output Response of crop yields, yield components, and irrigation requirements to climate change
adaptations.
Key Input Quantitative data on climate, soils, and crop management.
Ease of Use Data intensive and difficult to use without sufficient qualifications. A person trained in general
crop systems science with moderate programming skills should be able to use EPIC reliably
with 3-4 days of intensive training.
Training Required Requires technical modeling skills and a basic knowledge of agronomic principles.
Training Available Informal training available; see below.
Computer IBM-compatible PC 486 with 4k of RAM and 80MB.
Requirements
Documentation Williams, J.R., C.A. Jones, and P.T. Dyke. 1990. The EPIC model documentation. USDA-ARS
Technical Bulletin No. 1768. U.S. Department of Agriculture, Washington, DC. pp. 3-92.
Applications RAC analysis, drought assessment, soil loss tolerance tool, Australian sugarcane model
(AUSCANE), pine tree growth simulator, global climate change analysis, farm level planning,
drought impacts on residue cover, and nutrient and pesticide movement estimates for alternative
farming systems for water quality analysis. Also used in combination with socio-economic
model CRAM (Canadian Regional Agriculture Model) as part of an integrated assessment of
agriculture production in the Canadian prairies.
Contacts for Tools, Dr. Susan J. Riha, Dept. of Soil, Crop, and Atmospheric Sciences, Cornell University,
Documentation, 140 Emerson Hall, Ithaca, NY 14853 USA; Tel: +1.607.255.6143; e-mail: sjr4@cornell.edu.
Technical
Assistance
Cost No cost for model.
Page 4-33
Process Crop Models: Erosion Productivity Impact Calculator (EPIC) (cont.)
References Easterling, W.E., N.J. Rosenberg, M.S. McKenney, C.A. Jones, P.T. Dyke, and J.R. Williams.
1992. Preparing the erosion productivity impact calculator (EPIC) model to simulate crop
response to climate change and the direct effects of CO2. Special Issue: Methodology for
Assessing Regional Agricultural Consequences of Climate Change, Agricultural and Forest
Meteorology 59(1-2):17-34.
Izaurralde, R.C., J.R. Williams, W.B. McGill, N.J. Rosenberg and M.C. Quiroga Jakas. 2006.
Simulating soil C dynamics with EPIC: Model description and testing against long-term data.
Ecological Modelling 192(3-4):362-384.
Williams, J.R., C.A. Jones, and P.T. Dyke. 1984. A modeling approach to determining the
relationship between erosion and soil productivity. Transamerican Society of Agricultural
Engineering 27:129-144.
Page 4-34
Description CROPWAT is a DOS or Windows based decision support system designed as a tool to help
agro-meteorologists, agronomists, and irrigation engineers carry out standard calculations for
evapotranspiration and crop water use studies, particularly the design and management of
irrigation schemes. It allows the development of recommendations for improved irrigation
practices, the planning of irrigation schedules under varying water supply conditions, and the
assessment of production under rainfed conditions or deficit irrigation.
Appropriate Use As a tool for testing the efficiency of different irrigation strategies (e.g., irrigation scheduling,
improved irrigation efficiency) under climate change. Does not have the capacity of simulating
the direct effects of rising atmospheric carbon dioxide concentrations on crop water use.
Scope All locations; agricultural sector; site-specific.
Key Output Reference evapotranspiration, crop water requirements, and crop irrigation requirements.
Key Input Climatic and crop data (CLIMWAT database, included with the program) for calculations of
crop water requirements and irrigation requirements. The development of irrigation schedules
and the valuation of rainfed and irrigation practices are based on a daily soil-water balance
using various options for water supply and irrigation management conditions.
Training Required Intended for use by agricultural professionals because it requires background and training in
agricultural modeling. Using the manual, an expert can learn how to use this tool within 1-
2 days.
Training Available No formal training currently offered beyond the training manual.
Computer IBM-compatible PC 486 with 4k of RAM and 80MB supporting DOS or Windows.
Requirements CROPWAT version 5.7, issued in 1992, is written in BASIC and runs in the DOS
environment. The program is available in English, French and Spanish. The English version
of CROPWAT 5.7 has since been replaced by CROPWAT version 7.0. CROPWAT for
Windows contains a CROPWAT version in Visual Basic to operate in the Windows
environment.
Documentation CROPWAT for Windows and its manual are available in Acrobat format and can be
downloaded from http://www.fao.org/nr/water/infores_databases_cropwat.html.
Applications The CROPWAT database contains data for six continental regions and 144 countries. It has
been used to develop irrigation schedules under various management conditions to evaluate
rainfed production and drought effects and efficiency of irrigation practices.
Contacts for Tools, Martin Smith, Senior Irrigation Management Officer, Water Resources, Development, and
Documentation, Management Service, FAO, Viale delle Terme di Caracalla, 00100 Rome, Italy;
Technical Tel: 39.06.57053818; Fax: 39.06.57056275; e-mail: Martin.Smith@fao.org.
Assistance
Cost No cost to obtain model documentation or software.
References Doria, R., C.A. Madramootoo and B.B. Mehdi. 2006. Estimation of Future Crop Water
Requirements for 2020 and 2050, Using Cropwat. EIC Climate Change Technology, 2006
IEEE pp 1-6.
FAO Irrigation and Drainage Paper No. 46. Food and Agriculture Organization, Rome.
FAO. 1992. CROPWAT — A Computer Program for Irrigation Planning and Management.
Page 4-35
Description AquaCrop, a new version of CROPWAT, is a Windows-based software programme designed
to simulate biomass and yield responses of field crops to various degrees of water availability.
Its application encompasses rain fed as well as supplementary, deficit and full irrigation. It is
based on a water-driven growth-engine that uses biomass water productivity (or biomass water
use efficiency) as key growth parameter (WPb). The model runs on daily time-steps using
either calendar time or thermal time. It accounts for three levels of water-stress responses
(canopy expansion rate, stomatal closure and senescence acceleration), for salinity build-up in
the root zone and for fertility status.
AquaCrop is a tool for: (1) predicting crop production under different water-management
conditions (including rain fed and supplementary, deficit and full irrigation) under present and
future climate change conditions, and (2) investigating different management strategies, under
present and future climate change conditions.
Appropriate Use AquaCrop is useful for cropping planning and management and is mainly intended for
practitioners such as those working for extension services, governmental agencies, NGOs and
various kinds of farmers’ associations. It is useful for developing irrigation strategies under
water deficit conditions.
AquaCrop is particularly useful for perspective studies as it includes biomass and yield
predictions under global warming and elevated CO2, i.e., it is suitable for climate change types
of studies.
Scope AquaCrop can be applied to any field condition worldwide (once calibrated, it can be
extrapolated in space and time). The “field-plot” scale should be the most appropriate spatial
scale, while the “day” time-step is the time scale.
Key Output AquaCrop is a crop-growth model predicting biomass and yield response to water under any
climatic and soil conditions, including climate change cases.
Key Input AquaCrop requires weather data (air temperature, reference evapotranspiration and rainfall),
soil texture data (sand, clay, loam, in %) and crop parameters (initial, final and rate of change
in % Canopy Cover; initial, final and rate of deepening in root depth; biomass water
productivity; harvest index; typical management conditions such as irrigation dates and
amounts, sowing and harvest dates, mulching, etc.).
Ease of Use AquaCrop is user-friendly. The degree of difficulty can be rated very low.
Training Required AquaCrop comes with documentation and people do not require training to use it.
Nevertheless, it is generally recommended to participate in periodic training workshops that
are offered for special applications.
Training Available Training sessions are periodically organized based on demand.
Computer AquaCrop runs on PCs with Microsoft Windows operating systems and requires 5 Mb of Hard
Requirements Disk space.
Documentation AquaCrop includes a “User’s Guide” and “Technical Manual” for the calculation procedures
and algorithms.
Applications AquaCrop is at prototype level. Applications, tests and validations are under publication (first
official document will be available in 2008).
Contacts for Tools, Pasquale Steduto, Chief of Water Unit, Land and Water Division, Food and Agricultural
Documentation, Organization of the United Nations (FAO), Viale delle Terme di Caracalla, 00153 Rome, Italy;
Technical e-mail: pasquale.steduto@fao.org.
Assistance
Page 4-36
Irrigation Model: AquaCrop (cont.)
Cost AquaCrop will be downloadable from the Internet. It is intended to be free of charge. The
hard-copies of the documentation and the CD with the software will be inexpensive (to cover
the hardcopy production cost).
References AquaCrop is new and has not yet developed publications that have critically discussed its use.
Page 4-37
Description Alfalfa 1.4 is a DOS, Windows, or Macintosh based model that simulates growth and
development of the alfalfa plant, based on integrative plant physiology and morphology.
The model permits simulation of the diurnal patterns of production processes and growth for
studying the influences of temperature, radiation, water deficit, and carbon supply. Beginning
with tissue and organ level information, the growth of shoots is simulated for up to five age
classes of stems. Perennial, underground structures (crown, taproot, and fibrous roots) are
simulated over 10 soil layers. The model includes variations in plant population so that
overwintering and stand persistence can be simulated.
Appropriate Use Suited to a wide range of management issues and for coupling to insect and disease models.
Several usual adaptation strategies for coping with climate change (changes to cultivars,
planting dates) may be tested.
Key Output Total above-ground biomass (edible yield).
Key Input Daily weather data from standard meteorological reports.
Ease of Use Relatively easy to use with sufficient background.
Training Required Advanced programming skills (knowledge of FORTRAN language) helpful, agronomic
background required.
Training Available No formal training currently offered beyond the training manual.
Computer DOS, Windows, or Macintosh environments. Instructions for downloading given at the
Requirements website below in Contacts.
Documentation Denison, R.F. and B. Loomis. 1989. An Integrative Physiological Model of Alfalfa Growth
and Development. UC ANR Publication 1926, University of California, Davis.
Applications Used by farmers in the U.S.
Contacts for Tools, R. Ford Denison, Agronomy and Range Science, University of California, Davis, 95616, USA;
Documentation, Tel: +1.530.752.9688; e-mail: rfdenison@ucdavis.edu.
Technical
Assistance
Cost Program and manual available for US$25. Order form can be accessed at
http://www.ipm.ucdavis.edu/IPMPROJECT/order.html.
References Denison, F. and B. Loomis. 1989. An Integrative Physiological Model of Alfalfa Growth and
Development. UC ANR Publication 1926. University of California, Davis.
Page 4-38
Description AFRC-Wheat is a FORTRAN-based mechanistic model that incorporates crop response to
water and nitrogen constraints. Model processes include phenological development,
partitioning of photosynthesis, growth of leaf and stems, senescence, biomass accumulation,
and root system dynamics. The model uses a threshold of accumulated growing degree days
above a base and below a ceiling temperature to regulate growth.
Appropriate Use Used to investigate the interannual variation in the length of vegetative and floral development
and grain filling periods driven by historic climate data. Results of experiments with the
AFRC-Wheat model run with climate change can be extrapolated to national-scale crop
potential estimations using GIS technology.
Scope All locations; agricultural sector; national or site-specific.
Key Output Yield and yield components.
Key Input Weather data such as daily values of maximum, minimum, dry and wet bulb temperature, solar
radiation, sunshine hours, rainfall, wind, etc.
Ease of Use For experts with sufficient background, the model is easy to use.
Training Required Requires basic knowledge of climate, crop agronomy, crop physiology, and soils.
Training Available See web site in Contacts below for details.
Computer VAX computers (in FORTRAN 77) or IBM PC-compatibles (DOS v3.3 or higher).
Requirements
Documentation
Applications AFRC-Wheat has been used in the United Kingdom by several institutions including AFRC
and University of Oxford, in Italy by the University of Florence, in France by INRA Avignon,
in Hungary by the University of Budapest, in Germany by the University of Bonn, in New
Zealand by Crop and Food Research Limited, and in Syria by ICRISAT.
Contacts for Tools, Dr. John R. Porter, Dept. of Agricultural Services, Royal Agricultural and Veterinary
Documentation, University, agrovej 10, 2630 Taastrup, Denmark; Tel: 45.28.77.35.60;
Technical Fax: 45.35.28.21.75; e-mail: john.r.porter@agsci.kvl.dk.
Assistance
Cost Free for anyone in Global Change and Terrestrial Ecosystems (GCTE) Wheat Network.
References Addiscott, T.M. and A.P. Whitmore. 1987. Computer simulation of changes in soil mineral
nitrogen and crop nitrogen during autumn, winter, and spring. Journal of Agriculture Science
109:141-157.
Addiscott, T.M., P.J. Heys, and A.P. Whitmore. 1986. Application of simple leaching models
in heterogeneous soils. Geoderma 38:185-194.
Atkinson, M.D., P.S. Kettlewell, P.D. Hollins, D.B. Stephenson and N.V. Hardwick. 2005.
Summer climate mediates UK wheat quality response to winter North Atlantic Oscillation.
Agriculture and Forest Meteorology 130(1-2):27-37.
Miglietta, F. and J.R. Porter. 1992. The Effects of Climatic Change on Development in Wheat:
Analysis and Modelling. Journal of Experimental Biology 43(8):1147-1157.
Weir, A.H., P.L. Bragg, J.R. Porter, and J.H. Rayner. 1984. A winter wheat model without
water or nutrient limitations. Journal of Agricultural Science 102:371-383.
Page 4-39
Description RICEMOD is a FORTRAN and BASIC based ecophysiological model for irrigated rice
production. It includes a number of physical parameters, including accommodation of
subroutines dealing with soil and plant chemistry as well as physical processes of the
atmospheric environment. The model is very sensitive to soil parameters and has been
expanded to consider soil water deficit. Model components include maximum leaf area index,
timings of plant growth initiation and harvest, radiation-use efficiency (RUE), and harvest
index (HI).
Appropriate Use To study the relative constraining effects of radiation, leaf blade nitrogen content, respiration
rate, and assimilate partitioning on rice plant growth. Useful for predicting future production
scenarios. Does not include the influence of CO2.
Key Output Total area index (LA1, leaves and stem), growth rates, dry weights, dry matter partitioning,
grain yield, number of grains, CO2 assimilation, amount of radiation absorbed by the canopy.
Key Input Data intensive; requires soil, plant, and atmospheric data (rainfall, pan evaporation, radiation,
minimum and maximum temperature, day length).
Ease of Use Relatively easy to use, although requires some expertise and is fairly data intensive.
Training Required Requires knowledge of soil physical properties and some background in agronomics.
Training Available IRRI (see Contacts below) offers training.
Computer Programmed in FORTRAN IV and BASIC. Requires an IBM-compatible PC 370/135.
Requirements
Documentation McMennary, J. and J.C. O’Toole. 1985. RICEMOD: A Physiologically-Based Rice Growth
Model. IRRI research paper series #87. 1099 Manila, The Philippines.
Applications Used to indicate leaf water stress and predict the growth and yield component of different rice
varieties in a number of rice-producing countries, including the Philippines.
Contacts for Tools, Dr. John Sheehy, Chairman of the GCTE Rice Working Group, IRRI, PO Box 933, 1099
Documentation, Manila, The Philippines; Tel: 63.2.8181926/884869; Fax: 63.2.8178470/8182087;
Technical e-mail: irri@cgiar.com; websites: http://www.cgiar.org/ and http://www.irri.org/
Assistance
Cost Contact IRRI for information.
Page 4-40
Description GOSSYM/COMAX is a mechanistic cotton growth model and expert system that simulates
cotton growth given selected weather, soil, and management practices. Management options
include fertilizer and irrigation strategies. GOSSYM operates on daily time steps and
calculates material balances for water and nitrogen using weather and soil data to predict crop
growth and crop yield. The model also calculates material balances and soil nitrogen uptake.
Appropriate Use Effective aid to cotton growers, crop consultants, and researchers in the management of
irrigation water, nitrogen, plant growth regulators, and crop termination chemicals. Useful in
computing irrigation, planting time, and fertilization strategies for farmers; can be used in
conjunction with GCMs or WGEN to examine the effects of changes in climate on crop
production. Does not work well with intersecting insect data.
Key Output Crop yield and yield components.
Key Input Soil moisture and bulk density for each soil horizon, and weather data (temperature, wind
speed, solar radiation, and humidity).
Ease of Use Relatively easy to use despite significant data requirements.
Training Required Requires some knowledge of soil and plant physiology, although a user with sufficient
background can gain proficiency with a few days of training.
Training Available Short training course offered (see Contacts below).
Computer An IBM-compatible 486 with 4K of RAM and 80MB.
Requirements
Documentation Application manual available (see Cost below).
Applications Has been used in Spain, Greece, China, The Philippines, Australia (modified), Cameroon, and
Thailand as well as many states in the U.S.
Contacts for Tools, Dr. James McKinion, USDA-ARS, Crop Simulation Unit, PO Box 536, Mississippi State, MS
Documentation, 39762, USA; Tel: +1.601.324.4375; Fax: +1.601.324.4371;
Technical e-mail: mckinion@csrumsu.ars.ag.gov.
Assistance
Cost Can be obtained free of charge by e-mailing sturner@ra.msstate.edu.
References Doherty, R.M., L.O. Mearns, K.R. Reddy, M.W. Downton and L. McDaniel. 2003. Spatial
Scale Effects of Climate Scenarios on Simulated Cotton Production in the Southeastern U.S.A.
Climatic Change 60(1-2):99-129.
McKinion, J.M., D.N. Baker, F.D. Whisler, and J.R. Lambert. 1989. Application of
GOSSYM/COMAX system to cotton crop management. Agricultural Systems 31:55-65.
Watkins, K.B., Y.C. Lu, and V.R. Reddy. 1998. An economic evaluation of alternative pix
application strategies for cotton production using GOSSYM/COMAX. Computers and
Electronics in Agriculture (20)3:251.
Page 4-41
Description GLYCIM is a dynamic soybean simulation model with hourly time steps. It predicts growth
and yield of a soybean crop in response to climate, soil, and management practices by
deterministic simulation of organ-level processes such as photosynthesis, transpiration, carbon
partitioning, and organ growth and development.
Appropriate Use Farmers use GLYCIM for pre-plant planning decisions like the selection of cultivar/soil type
combination, planting date, and row spacing, and post-plant decisions like irrigation
scheduling, harvest timing, and yield prediction. The use of the model for crop management,
decision making, and input optimization shows promise in increasing profits to growers and
improvements to environment and groundwater quality. Amendable to the testing of
management adjustments to climate variation.
Key Output Plant height, water stress, nitrogen stress, stages of maturity, water content data, yield, and
yield components.
Key Input Requires daily maximum and minimum temperature, precipitation, and solar radiation data as
input. Soil data are also required to execute the model (e.g., soil horizons, organic matter, and
nitrogen content).
Ease of Use GLYCIM demands more data inputs than many crop models, but once data input requirements
are met at the user level, it is simple to use.
Training Required Requires some knowledge of agronomy and soil science.
Training Available Mississippi State University can provide training.
Computer Requires an IBM-compatible 486, with 4K of RAM and 80MB.
Requirements
Documentation http://eco.wiz.uni-kassel.de/model_db/mdb/glycim.html.
Applications Currently being used by farmers and several extension services in nine states in the U.S.
Contacts for Tools, Dr. James McKinion, USDA-ARS, Crop Simulation Unit, PO Box 536, Mississippi State, MS
Documentation, 39762 USA; Tel: +1.601.324.4375; Fax: +1.601.324.4371;
Technical e-mail: mckinion@csrumsu.ars.ag.gov.
Assistance
Cost Can be downloaded free from website (see Documentation above).
References http://eco.wiz.uni-kassel.de/model_db/mdb/glycim.html.
Page 4-42
Economic Models: Econometric (Ricardian-Based) Models
Description Econometric models are manipulated with climate change scenarios to predict the economic
costs of adaptation. They estimate structural relations between historical climate and
agricultural land values under the presumption that such relations reflect a steady-state level of
adaptation of regional farming systems to local climate characteristics. These relations are
cross-sectional (i.e., units of observation are geographic areas) and the geographic variation in
land values is assumed to be partly regulated by differences in the quality of climate inputs.
Parameter estimates embed the relative efficiency of current adaptation to a range of climate
conditions (cold and warm).
Appropriate Use Econometric models can capture the full range of economic adaptations that farmers and
supporting institutions are likely to use in response to climate change. They are particularly
suited to analysis that assumes no change in real crop prices in response to climate change.
These tools do not estimate the cost of adaptation.
Scope All locations; agricultural sector; national or regional.
Key Output Potential changes in regional or national cropping patterns, land prices, production, revenues,
and profits.
Key Input Historical climate and land values.
Ease of Use Because no established or “canned” models exist, each application requires development of a
unique, region-specific model.
Training Required Expertise in principles of econometric modeling.
Computer IBM-compatible PC.
Requirements
Documentation See Mendelsohn et al., 1994, in References below.
Applications Econometric models have been used to estimate the economic cost/benefit of climate change
for agriculture and forestry in the United States, Brazil, and India.
Contacts for Tools, Dr. Robert Mendelsohn, Yale University, 360 Prospect St., New Haven, CT 06511 USA;
Documentation, Tel: +1.203.432.5128; Fax: +1.203.387.0766; e-mail: robert.mendelsohn@yale.edu.
Technical
Assistance
Cost Varies, depending on data needs and resources required for developing a unique model.
References Dinar, A., R. Mendelsohn, R. Evenson, J. Parikh, A. Sanghi, K. Kumar, J. McKinsey, and
S. Lonergon. 1998. Measuring the Impact of Climatic Change on Indian Agriculture. World
Bank Technical Report No. 409, The World Bank, Washington, DC.
Mendelsohn, R. and J. Neumann (eds.). 1999. The Impacts of Climate Change on the
U.S. Economy. Cambridge University Press, Cambridge, England.
Mendelsohn, R., W. Nordhaus, and D. Shaw. 1994. The impact of global warming on
agriculture: A Ricardian analysis. American Economic Review 84(4):753-751.
Seo, S. and R. Mendelsohn. 2006. The impact of climate change on livestock
management in Africa: a structural Ricardian analysis. CEEPA Discussion Paper No. 23,
Centre for Environmental Economics and Policy in Africa, University of Pretoria.
Page 4-43
Description Input-output accounting (using the IMPLAN model as an example) describes commodity
flows from producers to intermediate and final consumers. The total industry purchases of
commodities, services, employment compensation, value added, and imports are equal to the
value of the commodities produced. Industries producing goods and services for final use and
purchases for final use (final demand) drive the model. Industries producing goods and
services for final demand purchase goods and services from other producers. These other
producers, in turn, purchase goods and services. This buying of goods and services continues
until leakages from the region stop the cycle. The resulting sets of multipliers describe the
change of output for every regional industry caused by a US$1.00 change in final demand for
any given industry.
Appropriate Use Serves three functions: data retrieval, data reduction and model development, and impact
analysis. Comprehensive and detailed data coverage of the entire U.S. by county and the
ability to incorporate user-supplied data at each stage of the model building process provide a
high degree of flexibility in terms of both geographic coverage and model formulation. Can be
used to look at the effects of adaptations such as changes in economic policies (e.g., removal
or imposition of subsidies) toward agriculture. Designed specifically for the U.S., but basic
model structure can be adapted and applied to other countries where data are available.
Scope Agricultural sector; national or regional-specific.
Key Output Being demand-driven, most input-output models are structured to trace changes in the flows of
capital and labor between industries in response to a change in final demand. Climate change
impact analysis often uses input-output models to trace the interindustry flows in response to
climate-induced changes in supply.
Key Input The IMPLAN database consists of (1) a U.S. level technology matrix and (2) estimates of
sectoral activity for final demand, final payments, industry output and employment for each
county in the U.S., along with state and national totals.
Ease of Use Commercially available input-output models like IMPLAN are relatively easy to use, although
modification from demand to supply driven models is facilitated with an economics
background.
Training Required Training in the use of these models, along with a background in economic analysis, is
essential.
Training Available MIG Workshops (see Contacts below) provide training on the use of IMPLAN in economic
analysis. Workshops are held either in MIG’s Minnesota USA office or at user’s site.
Computer Requires a PC, Windows, and the IMPLAN software package. Adobe Acrobat needed to
Requirements download user manual from the website.
Documentation A user manual for IMPLAN, available from the MIG, Inc. website listed in Contacts below,
may be downloaded to a PC using Adobe software.
Applications Applied by numerous state, federal, academic, and private institutions in the U.S., such as U.S.
Department of Agriculture Forestry Service, the Illinois Department of Natural Resources, and
Cornell University.
Page 4-44
Economic Models: Input-Output Modeling (with IMPLAN) (cont.)
Contacts for Tools, Tools and Documentation: MIG, Inc., 1725 Tower Drive West, Suite 140, Stillwater, MN
Documentation, 55082 USA; Tel: +1.651.439.4421; Fax: +1.651.439.4813; e-mail: info@implan.com;
Technical website: http://www.implan.com/.
Assistance Product Support: http://www.implan.com/support.html.
Cost IMPLAN costs vary depending on scope of study (county, state, or national). County-level
software costs $150 per county. State-level software averages about $1,500 per state.
References Bowes, M. and P. Crosson. 1993. Consequences of climate change for the MINK economy:
Impacts and responses. Climatic Change 24:131-158.
Page 4-45
4.2 Water Sector Tools
The water sector tools described in this compendium, listed in Table 4.2, are mathematical
models for assessing water resource adaptations to climate change, focusing on regional water
supply and demand analysis of managed water systems. The models summarized here include
long-range simulation tools such as WEAP and IRAS, short-range simulation models like
RiverWare and WaterWare, and economic optimization models like Aquarius. RIBASIM allows
for the assessment of infrastructure, and operational and demand management measures.
MIKEBASIN provides basin scale solutions for optimizing water allocations, conjunctive water
use, reservoir operation, and water quality issues, emphasizing results visualization through a
GIS interface. CALVIN helps identify integrated water management strategies covering surface
water, ground water, water conservation, water market, water reuse, and desalination water
management options. OSWRM, which simulates water resource supply and demand, was
developed to support a stakeholder dialogue process that focuses on the potential role of climate
change in water resource management. The European Flood Alert System, on the other hand, is a
flood forecasting system that provides medium-range flood forecasting information for trans-
national river basins across Europe.
Table 4.2. Tools covered in water sector
WaterWare
RiverWare
Aquarius
RIBASIM
MIKE BASIN
Spatial Tools for River Basins and Environment and Analysis of
Management Options (STREAM)
Page 4-46
WaterWare
Description This UNIX based software package is an advanced water resource simulation tool that
incorporates numerous models and analyses for easy access to advanced tools for data analysis,
simulation modeling, rule-based assessment, and multicriteria decision support for a broad
range of water resources management problems. WaterWare is implemented in an open, object-
oriented architecture; it supports the seamless integration of databases, GIS, models, and
analytical tools into a common sense, easy-to-use framework. This includes a multimedia user
interface with Internet access, a hybrid GIS with hierarchical map layers, object data bases, time
series analysis, reporting functions, an embedded expert system, and a hypermedia help-and-
explain system. Real-time data management, modeling, forecasting, and reporting, and support
for operational management are provided with a real-time expert system. Designed to be a
highly detailed operation analysis tool at shorter timesteps (hourly to daily). Strongly linked to
water quality modeling of instream flows to determine optimal wastewater loading strategies as
well as related engineering, environmental, and economic aspects. WaterWare includes a
number of simulation and optimization models and related tools, including a rainfall-runoff and
water budget model, an irrigation water demand estimation model, dynamic and stochastic
water quality models, a groundwater flow and transport model, a water resources allocation
model, and an expert system for environmental impact and assessment.
Appropriate Use Analysis and planning of complex, large-scale water resource management problems. Could be
used to investigate realistic adaptation strategies under various hydrologic conditions. System
includes both a rainfall/runoff model and a rule-based water resource system simulation tool, so
a consistent hydrologic and water resource assessment could be made.
Scope All locations; ground- and surface water systems; national or site-specific.
Key Output Water allocations at demand nodes, flows in river reaches, water quality constituents throughout
water system, aquifer dynamics, and other water system components.
Key Input Extensive data requirements. Geographic: background maps with administrative boundaries,
land use; river network (geometry) graph and segment geometry (cross sections, roughness) for
all channel based models. River Basin Objects: these include classes such as subcatchments,
aquifers, lakes and reservoirs, cities, industries, agricultural areas and irrigation districts,
representing the nodes in the river network; for each object, and depending on the type of
object, data on water demand, use, consumptive use, and wastewater generation (pollution
loads) are required. For aquifers, basic hydrogeological data are required; for reservoirs,
morphometry and operating rules. Hydrological and Meteorological: Time series of basic
hydrometeorological data (hourly to daily) covering at least one year or the period of interest for
the long-term models), temperature and precipitation, optionally relative humidity, wind
speeds,. cloud cover and solar radiation, potential evapotranspiration. Water Quality: hourly to
daily observation data from one or more water quality observation stations; station location and
regular time series for each parameter. Economic: Discrete cost functions (investment and
operational costs) for a set of alternative waste water treatment technologies.
Ease of Use Fairly difficult to use given its broad scope.
Page 4-47
WaterWare (cont.)
Training Required Significant training in computer modeling and the engineering, environmental, and economic
aspects of water systems.
Training Available Software purchase includes on-site installation. Training courses and on-site training available
(see Contacts below).
Computer WaterWare is currently supported for UNIX servers (SUN Sparc/Solaris, IBM RS6000/AIX,
Requirements HP Risc/HP-UX, Intel Pentium/Linux), with a minimum of 64 MB RAM and 128 MB of swap
space. About 2 GB disk space is required; disk space requirements depend on the amount of
geographical data (in particular satellite images) and monitoring data. A graphics resolution of
1280*1024 (256 simultaneous colors) is required for the X11 platforms.
Documentation Documentation available from Environmental Software and Services, GmbH (see Contacts
below).
Applications River Thames in England, Lerma Chapala in Mexico, West Bank and Gaza in Palestine,
Kelantan River in Malaysia and Yangtze River in China. River basins and coastal zones in
Turkey, Lebanon, Jordan, Egypt, and Tunisia.
Contacts for Environmental Software and Services, GmbH, P.O. Box 100 A-2352 Gumpoldskirchen,
Framework, Austria; Tel: 43225263305; Fax: 432252633059;
Documentation, website: http://www.ess.co.at/WATERWARE/.
Technical
Assistance
Cost ECU30,000 for initial installation, support, and one-year license.
References WaterWare: A Water Resources Management Information System — Palestinian case study.
Available from Environmental Software and Services, GmbH, P.O. Box 100 A-2352
Gumpoldskirchen, Austria.
Page 4-48
Description This is a PC based surface and groundwater resource simulation tool, based on water balance
accounting principles, which can test alternative sets of conditions of both supply and demand.
The user can project changes in water demand, supply, and pollution over a long-term planning
horizon to develop adaptive management strategies. WEAP is designed as a comparative
analysis tool. A base case is developed, and then alternative scenarios are created and compared
to this base case. Incremental costs of water sector investments, changes in operating policies,
and implications of changing supplies and demands can be economically evaluated.
Appropriate Use What-if analysis of various policy scenarios and long-range planning studies. Adaptive
agriculture practices such as changes in crop mix, crop water requirements, canal linings;
changes in reservoir operations; water conservation strategies; water use efficiency programs;
changes in instream flow requirements; implications of new infrastructure development.
Strengths include detailed demand modeling.
Scope All locations, surface- and groundwater systems; national, international or site-specific.
Key Output Mass balances, water diversions, sectoral water use; benefit/cost scenario comparisons;
pollution generation and pollution loads.
Key Input Configuration of system (can use GIS layers for background) and component capacities and
operating policies. Water demand: Spatially explicit demographic, economic, crop water
requirements; current and future water demands and pollution generation. Economic data: Water
use rates, capital costs, discount rate estimates. Water supply: Historical inflows at a monthly
timestep; groundwater sources. Scenarios: Reservoir operating rule modifications, pollution
changes and reduction goals, socioeconomic projections, water supply projections.
Ease of Use Relatively easy to use. Requires significant data for detailed analysis.
Training Required Moderate training/experience in resource modeling required for effective use.
Training Available On-line tutorial available at http://www.weap21.org/. Contact SEI for details regarding available
training (see below).
Computer 200 MHz or faster Pentium class PC with Microsoft Windows 95 or later (a 400 MHz PC with
Requirements Windows 98 or later is recommended). A minimum of 32 MB of RAM and 50 MB of free hard
disk space is also required (64 MB of RAM recommended). In addition Microsoft Internet
Explorer version 4.0 is required for viewing WEAP’s HTML Help. Monitor should be set to a
minimum resolution of 800x600, but preferably even higher (e.g., 1024x768 or 1280x1024), to
maximize the presentation of data and results.
Documentation WEAP21 User Guide; available online at
http://www.weap21.org/downloads/WEAP_User_Guide.pdf.
Applications Has been used for projects in the Aral Sea; Beijing, China; Rio San Juan, Mexico; Rajasthan,
India; South Africa; West Africa; California, Texas, and Southeast, USA; Central Asia; India;
Nepal; Korea; and Cairo, Egypt. Has also been used in Uzbekistan to assess water resource
capacity with regard to irrigation needs.
Contacts for Jack Sieber, Senior Software Scientist, Stockholm Environment Institute (SEI), Boston; SEI-
Framework, Tellus Institute, 11 Arlington St., Boston, MA 02116-3411 USA;
Documentation, Tel: +1.617.266.5400; e-mail: weap@tellus.com; website: http://www.weap21.org/.
Technical
Assistance
Page 4-49
Water Evaluation and Planning System (WEAP) (cont.)
Cost 2-year license fee ranges from US$1000-2500, depending on type of user. Free to developing
countries. See http://www.weap21.org for more information.
References Arranz, R. and M. McCartney. 2007. Application of the Water Evaluation And Planning
(WEAP) model to assess future water demands and resources in the Olifants catchment, South
Africa. Colombo, Sri Lanka: International Water Management Institute. 103 pp. (IWMI
Working Paper 116).
Hansen, E. 1994. WEAP — A system for tackling water resource problems. In Water
Management Europe 1993/94: An Annual Review of the European Water and Wastewater
Industry. Stockholm Environment Institute: Stockholm. U.S. Water News, Oct. 1992. Aral Sea
is classic example of ecological suicide. No. V4, p. 12.
Huber-Lee, A., D. Yates, D. Purkey, W. Yu, and B. Runkle. 2003. Water, climate, food, and
environment in the Sacramento Basin — contribution to ADAPT: Adaptation strategies to
changing environment. Stockholm Environment Institute, Boston, MA, USA.
Raskin, P., E. Hansen, Z. Zhu, and D. Stavisky. 1992. Simulation of water supply and demand
in the Aral Sea region. Water International 17(2):55-67.
Page 4-50
RiverWare
Description A general UNIX based river and reservoir modeling application with both operational and
planning applications. This system offers multiple solution methodologies that include
simulation, simulation with rules, and optimization. RiverWare can accommodate a variety of
applications, including daily scheduling, operational forecasting, and long-range planning.
Modeling framework is non-spatial (not GIS based). Because of its object-oriented nature, the
modeling framework allows for the generation of new modeling methods that could include
economically driven demand modeling.
Appropriate Use The tool is most appropriately used to model resource demands on complex water systems
governed by water law and intricate operating rules. For broader, water resource-related
activity, WEAP or IRAS tools are preferable (less expensive, easier to implement, less data
required). Uncertainty modeling related to parameter variance provides estimates of
uncertainty in model output.
Scope All locations; surface water systems; national or site-specific.
Key Output Mass balances, detailed flow descriptions throughout the water system, water diversions,
hydropower generation, hydropower tradeoffs to other operating objectives. Water quality
descriptions of dissolved solids and water temperature.
Key Input Water demand: Description of diversion requirements (no explicit, economically driven
demand modeling at this time). Water supply: Historical inflows at multiple timesteps,
reservoir characteristics, stream reach routing characteristics. No groundwater components
currently available. Scenarios: Operating rules of system given as prioritized operating policy
described through a rule-based computer programming language. Water quality: Return water
temperatures from thermal plants.
Ease of Use The flexibility of the system makes it a more difficult model to use. Ideally designed for
detailed analysis, requiring significant data.
Training Required Requires extensive knowledge of the physical characteristics of water systems. Knowledge of
water systems modeling helpful.
Training Available CADSWES regularly holds training workshops in Boulder, CO, USA (see Contacts below).
Computer Sun Solaris (Unix) workstation with Solaris 2.7 or higher operating system, or Windows
Requirements NT/2000/XP; system memory requirements depend on river/reservoir model size and data; a
minimum of 256MB is recommended. CPLEX, a third-party solver, is required to run the
RiverWare Optimization module.
Documentation Detailed documentation available through CADSWES; RiverWare description at
http://cadswes.colorado.edu/riverware/.
Applications Currently, modeling applications have focused on operational strategies of current systems. In
the U.S., the model has been used to develop operational strategies for the Tennessee Valley
Authority’s (TVA) river/reservoir system at short time scales (daily). Used for evaluating
operating policies on the Colorado River at longer timesteps (monthly). The model has also
been applied in the San Juan Basin and Upper Rio Grande.
Page 4-51
RiverWare (cont.)
Contacts for Center for Advanced Decision Support in Water and Environmental Systems (CADSWES),
Framework, University of Colorado, Campus Box 428, Boulder, CO 80309-0428 USA; e-mail:
Documentation, rwinfo@cadswes.colorado.edu; website: http://cadswes.colorado.edu/riverware/.
Technical
Assistance
Cost Single node license US$6500 for first year; US$2500 annual renewal fee; additional fees for
optimization solver. See http://cadswes.colorado.edu/riverware/LicensingRW/ for more
information.
References See http://cadswes.colorado.edu/riverware/publications.html for a list of references.
Zagona, E.A., T.J. Fulp, R. Shane, T. Magee, and H.M. Goranflo. 2001. RiverWare: A
generalized tool for complex reservoir systems modeling. Journal of the American Water
Resources Association 37(4):913-929.
Page 4-52
Description This tool is a PC based surface water resource simulation tool, based on water balance
accounting principles that can test alternative sets of conditions of both supply and demand.
The river system is represented by a network of nodes and links, with the nodes representing
aquifers, gauges, consumption sites, lakes, reservoirs, wetlands, confluences, and diversions.
Links are river reaches or water transfers to the nodes. The model can simulate up to 10
independent or interdependent water quality factors at a submonthly timestep. Through data
interfacing, IRAS can link to various external modules such as rainfall-runoff and to economic
and ecological impact prediction programs.
Appropriate Use Used in long-range planning to evaluate the performance or impacts of alternative designs and
operating policies of regional water resource systems, ranging from simple to complex
systems. It has more significant water quality modeling ability than WEAP, but does not
include a detailed demand modeling environment. Strengths include modeling capability of
groundwater, natural aquatic systems and water quality. Includes wetland analysis.
Scope All locations; surface water systems; national or site-specific.
Key Output System performance in meeting demand requirements; flows, storage volumes, energy, and
water quality throughout system.
Key Input Configuration of system and component capacities and operating policies. Water demand:
Demand requirements at various nodes. Water supply: Historical inflows at various time steps,
evaporation and seepage losses from system, aquifer recharge rates, wetland characteristics.
Water quality: Waste loads. Scenarios: Reservoir operating rule modifications, pollution
changes and reduction goals.
Ease of Use Relatively easy to use. Detailed analysis requires significant data.
Training Required Moderate training/experience in resource modeling and demand analysis required for effective
use.
Training Available Contact RPA for details regarding available training (see Contacts below).
Computer IBM-compatible PC with Windows 95 or higher. Recommended Pentium processor with
Requirements 24MB RAM, 100MB disk space, and color monitor.
Documentation Detailed users guide is available from RPA in Contacts, below.
Applications Has been applied to evaluate designs and policies of river-aquifer systems in North America,
Europe, Africa, and Asia.
Contacts for Marshall Taylor, Resources Planning Associates, Inc., 231 Langmuir Bldg., 95 Brown Road,
Framework, Ithaca, NY 14850 USA; Tel: +1.607.257.4305; Fax: +1.607.257.4306.
Documentation,
Technical
Assistance
Cost Relatively low cost to obtain model documentation and software.
References Brandão, C. and R. Rodrigues. 2000. Hydrological simulation of the international catchment
of Guadiana River. Physics and Chemistry of the Earth, Part B: Hydrology, Oceans and
Atmosphere 25(3):329-339.
CH2M Hill, 1993. New Jersey Statewide Water Supply Master Plan, Task 4 Report:
Preliminary Development of Water Supply Initiatives. CH2M Hill, Parsippany, NJ, USA.
Loucks, D.P., P.N. French and M.R. Taylor. 1995. IRAS — Interactive River-Aquifer
Simulation: Program Description and Operation. Resources Planning Associates, Incorporated,
Ithaca, NY, USA.
Page 4-53
Aquarius
Description A computer model depicting the temporal and spatial allocation of water flows among
competing traditional and nontraditional water uses in a river basin. The model focuses on
optimization of a nonlinear system, where supplies and requested demands are prescribed on
the system. Water resource systems are described in a node-link architecture, with river
reaches, reservoirs, lakes, and demand objects describing the system. A drag and drop user
interface helps define the system layout, which is then translated into a quadratic objective
function with linear constraints.
Appropriate Use Determining economically efficient water destination strategies. Can be used in a full
deterministic optimization mode, for general planning purposes, or in a quasi-simulation
mode, with restricted foresight capabilities. Supports the following water uses (system
components): storage reservoir, hydropower plants, agricultural water use, municipal and
industrial water use, instream recreation water use, reservoir recreation use, and instream flow
protection. For a water use with a predetermined level of allocation but without a defined
economic demand function, the analyst can either constrain the model to meet the specified
allocation or experiment with surrogate demand curves until the required level of water
allocation is reached. The latter approach indicates the level of economic subsidy required to
provide the incremental increases of flow to sustain the use in open competition with other
uses. The interactive nature of Aquarius facilitates such experimentation.
Scope All locations; surface and groundwater systems; cost-effectiveness; national or site-specific.
Key Output Economically efficient allocations that meet prescribed demands.
Key Input The model’s input data have been divided into physical and economic data. The physical data
include the information associated with the dimensions and operational characteristics of the
system components, such as maximum reservoir capacity, percent of return flow from an
offstream demand area, and power plant efficiency. The economic data consist mainly of the
demand functions of the various water uses competing for water.
Ease of Use Fairly easy to use. Straightforward user interface with limited modeling scope makes model
setup time relatively short.
Training Required Minimal training required. Requires some knowledge of optimization theory.
Training Available Questions regarding software availability and training can be directed to Gustavo E. Diaz (see
below).
Computer PC Windows 95, 98, NT, or Windows 2000 operating system.
Requirements
Documentation Model documentation is available on line at
http://www.fs.fed.us/rm/value/docs/aquadoc01.pdf.
Applications Authors are not aware of existing applications in developing countries.
Contacts for Gustavo E. Diaz, Department of Civil Engineering, Colorado State University, Fort Collins,
Framework, CO, 80523, USA; Tel: +1.970.491.5048; Fax: +1.970.491.7721;
Documentation, e-mail: gdiaz@lamar.colostate.edu;
Technical website: http://www.fs.fed.us/rm/value/aquariusdwnld.html.
Assistance
Page 4-54
Aquarius (cont.)
Cost Model documentation and software is free for government agencies and for teaching and
research purposes.
References Diaz, G.E., T.C. Brown, and O. Sveinsson. 2005. Aquarius: A Modeling System for River
Basin Water Allocation. General Technical Report RM-GTR-299-revised. U.S. Department of
Agriculture, Forest Service, Rocky Mountain Forest and Range Experiment Station, Fort
Collins, CO.
Page 4-55
RIBASIM
Description RIBASIM is a generic model package for simulating the behavior of river basins under various
hydrological conditions. The model package is a comprehensive and flexible tool that links the
hydrological water inputs at various locations with the specific water users in the basin.
RIBASIM enables the user to evaluate a variety of measures related to infrastructure and
operational and demand management, and to see the results in terms of water quantity and
flow composition. RIBASIM can also generate flow patterns that provide a basis for detailed
water quality and sedimentation analyses in river reaches and reservoirs. Demands for
irrigation, public water supply, hydropower, aquaculture, and reservoir operation can be taken
into account. Surface- and groundwater resources can be allocated. Minimum flow
requirements and flow composition can be assessed.
Appropriate Use Evaluation of the options and potential for development of water resources in a river basin.
Assessment of infrastructure, and operational and demand management measures.
Scope All locations, surface- and groundwater systems; national or site-specific.
Key Output Water balance providing the basic information on the available quantity of water as well as the
composition of the flow at every location and any time in the river basin. This takes into
account drainage from agriculture, discharges from industry and the downstream re-use of
water in the basin.
Key Input Configuration of system (can use GIS layers for background) and component capacities and
operating policies. Water demand: Spatially explicit demographic, economic, crop water
requirements; current and future water demands and pollution generation. Economic data:
Water use rates, capital costs, discount rate estimates. Water supply: Historical inflows at a
monthly timestep; groundwater sources. Scenarios: Reservoir operating rule modifications,
pollution changes and reduction goals, socioeconomic projections, water supply projections.
Ease of Use Relatively easy to use. Requires significant data for detailed analysis.
Training Required Moderate training/experience in resource modeling required for effective use.
Training Available Contact Delft Hydraulics for details regarding available training (see Contacts below).
Computer 200 MHz Pentium processor; 64 Mb RAM; 400 Mb free disk space; Super VGA graphics card
Requirements with matching monitor; mouse; CD-ROM drive; RIBASIM requires MICROSOFT
WINDOWS 95, 98, 2000, NT or XP.
Documentation User manual and technical reference manual are provided with RIBASIM software. Brochure
and other materials are available at http://www.wldelft.nl/soft/ribasim/doc/index.html.
Applications RIBASIM has been applied for more than 20 years in a wide variety of projects and countries.
Water management organizations worldwide use it to support their management and planning
activities. See http://www.wldelft.nl/soft/ribasim/cases/index.html for more details.
Contacts for WL Delft Hydraulics Rotterdamseweg 185, P.O. Box 177, 2600 MH Delft, The Netherlands.
Framework, Tel: +31.0.15.285.8585; Fax: +31.0.15.285.8582; e-mail: ribasim.info@wldelft.nl;
Documentation, website: http://www.wldelft.nl/soft/ribasim/int/index.html.
Technical
Assistance
Cost Relatively low cost to obtain model and documentation.
References Contact Delft Hydraulics for references.
Page 4-56
MIKE BASIN
Description For addressing water allocation, conjunctive use, reservoir operation, or water quality issues,
MIKE BASIN couples the power of ArcView GIS with comprehensive hydrologic modeling
to provide basin-scale solutions. The MIKE BASIN philosophy is to keep modeling simple
and intuitive, yet provide in-depth insight for planning and management. In MIKE BASIN, the
emphasis is on powerful simulation result visualization in both space and time, making it the
perfect tool for building understanding and consensus. For hydrologic simulations, MIKE
BASIN builds on a network model in which branches represent individual stream sections and
the nodes represent confluences, diversions, reservoirs, or water users. The ArcView GIS
interface has been expanded accordingly, e.g., such that the network elements can be edited by
simple right-clicking. Technically, MIKE BASIN is a quasi-steady-state mass balance model,
however, allowing for routed river flows. The water quality solution assumes purely advective
transport; decay during transport can be modeled. The groundwater description uses the linear
reservoir equation.
Appropriate Use Water availability analysis: conjunctive surface and groundwater use, optimization thereof.
Infrastructure planning: irrigation potential, reservoir performance, water supply capacity,
waste water treatment requirements. Analysis of multisectoral demands: domestic, industry,
agriculture, hydropower, navigation, recreation, ecological, finding equitable trade-
offs. Ecosystem studies: water quality, minimum discharge requirements, sustainable yield,
effects of global change. Regulation: water rights, priorities, water quality compliance.
Scope All locations; surface- and groundwater systems; national or site-specific.
Key Output Mass balances, detailed flow descriptions throughout the water system, water diversions,
hydropower generation, hydropower tradeoffs to other operating objectives. Water quality
descriptions of dissolved solids and water temperature.
Key Input Overall system: Digitized river system layout, withdrawal and reservoir locations. Water
demand: Time series of water demand, percentage of ground abstraction, return flow ratio,
linear routing coefficient (irrigation only). Water supply: Unit naturalized runoff (time series),
initial groundwater elevation, linear reservoir time constant, groundwater recharge time series.
Hydropower: time series of withdrawal for hydropower, installed effect, tail water level,
machine efficiency. Reservoir: Initial water level, operational rule curves, stage-area-volume
curve, time series of rainfall and evaporation, linkages to users, priority of delivery, linkages to
upstream nodes. Water quality: rate parameters, temperature, non-point loads, weir constant
for re-aeration, transport time and water depth or Q-h relationship, concentrations in effluent.
Ease of Use Relatively easy to use if user is familiar with ArcView software. Requires significant data for
detailed analysis.
Training Required Moderate training/experience in resource modeling required for effective use. Also requires
working knowledge of ESRI’s ArcView software.
Training Available MIKE BASIN courses are arranged both regularly and upon request (see
http://www.dhigroup.com/Software/Training/CourseTopics/WaterResources.aspx).
Computer ArcView 3.2 or 3.2a; Windows 98, NT, 2000, or XP operating system (MIKE BASIN may
Requirements also run on Windows 95 and ME, but those operating systems are not officially supported by
DHI); minimum 64 MB RAM (recommended); high resolution monitor, minimum 800x600
pixels; minimum 200 MB free disk space.
Page 4-57
MIKE BASIN (cont.)
Documentation Detailed documentation including on-line tours of the model available through their website:
http://www.dhigroup.com/Software/WaterResources/MIKEBASIN.aspx.
Applications Has been used in Peru; Sabah, Malaysia; Gold Coast, Australia; Idaho and North Carolina,
USA; Italy; Poland; Thailand; Sri Lanka; Senegal; Czech Republic; Zambia; and Tanzania.
Contacts for DHI’s Software Support Centre; Tel: +45.45.16.93.33 Fax: +45.45.16.92.92;
Framework, e-mail: software@dhi.dk; website:
Documentation, http://www.dhigroup.com/Software/WaterResources/MIKEBASIN.aspx.
Technical
Assistance
Cost Licensed software cost US$3000 per class set, US$300 to update each set.
References See
http://www.dhigroup.com/Software/WaterResources/MIKEBASIN/References/Publications.as
px for references.
Page 4-58
Spatial Tools for River Basins and Environment and Analysis of Management Options
(STREAM)
Description STREAM is a spatial hydrological model that allows for assessing hydrological impacts due to
changes in climate and socio economic drivers. STREAM is set up according to a policy
analysis framework and ensures a structured approach for an entire river basin including the
coastal zone. STREAM uses hydrological input data, scenarios, and adaptive strategies and
provides output data on water availability and (salt water) quality. It integrates within this
frame several types of interactions between effects of river management on the coastal zone,
land and water uses such as short term deforestation and dam building, and long term impacts
of climate change.
STREAM is a spatial model and uses data from digital GIS maps and satellite observations, in
particular land-use related data. The basis of the instrument is a grid or raster-based water
balance approach. Water use and withdrawals can be simulated such as the spatial distribution
of agriculture and urbanization use and the storage of water in the open flood plain and
groundwater aquifers.
The main advantage of STREAM is that it primarily uses public domain data from the internet
providing a very first order of estimates on impacts. This makes the STREAM instrument very
flexible for future extensions and adjustments. The next stage of development, calibration and
validation, is usually performed in close cooperation with local stakeholders, using local time
series of in and output data increasing the level of reliability.
Appropriate Use The STREAM can be applied to entire river basins with different sizes for which it considers
the full year hydrological cycle. For example, in large river basins, a grid size of 1 x 1 km2 can
be applied while in the lower regions a 100 x 100 m2 grid size is applicable. Time steps can
vary from 1 month as an overall step to either decades or 5-day steps for specific periods of
interest during the hydrological cycle, such as the flood season.
Scope STREAM has been primarily applied to studies to assess impacts of climate change, climate
variability and land use changes (including dams and reservoirs) to water resources in river
basins. For these issues, STREAM enables calculation of the impacts of changes in
temperature and precipitation on the regional hydrology. Based on these impacts, different
management strategies can be assessed by providing a quantitative assessment of water
availability under various scenarios.
Key Output Key output is spatial hydrological information on water availability in the form of (monthly)
soil-humidity and river discharges. The latter outputs can be in either a hydrograph or a spatial
GIS based map.
Key Input The required input data is: temperature, precipitation, soil types, elevation. And for calibration
and validation: runoff data.
Ease of use The model is easy to use for non technical users. However, it is best used within a team of
both hydrological experts and policy makers. Some GIS knowledge is required.
Training Required Some GIS knowledge and training is required to prepare the input data of the model. Also
some basic hydrological knowledge is an advantage but is not necessary.
Page 4-59
Spatial Tools for River Basins and Environment and Analysis of Management Options
(STREAM) (cont.)
Training Offered A setup manual is delivered with the model. It is recommended, however, that users follow a
short introductory course by the distributor and RIKZ.
Computer The minimum hardware requirement is a PIII – 500MhZ computer with 256 MB internal
Requirements memory
Documentation STREAM software and user manual are available at http://www.geo.vu.nl/users/ivmstream/.
Applications STREAM has been applied to the following river basins: Rhine (Europe), Meuse (Europe),
Amu Darya (Central Asia), Syr Darya (Central Asia), Nile (Africa), Niger (Africa), Incomati
(Africa), Zambezi (Africa), Ganges/Brahmaputra (Asia), Yangtze (China), Krishna (India),
Perfume (Vietnam).
Contacts for Dr. Robbert Misdorp, Coastal Zone Management Centre/National Institute for Coastal and
Framework, Marine Management (RIKZ),Ministry of Transport, Public Works and Water Management
Documentation and Kortenaerkade 1, PO BOX 20907, 2500EX The Hague. The Netherlands;
Technical Tel: +31.70.3114311, Fax: +31.70.3114300, e-mail: R.Misdorp@chello.nl;
Assistance website: http://www.netcoast.nl.
Dr. Jeroen Aerts, Senior Researcher Water Resources, Climate Change
Institute for Environmental Studies (IVM), Vrije Universiteit Amsterdam
De Boelelaan 1087, 1081 HV Amsterdam, The Netherlands, Tel. +31.20.4449528 / 9555;
Fax. +31.20.4449553, e-mail: jeroen.aerts@ivm.vu.nl;
website: http://www.falw.vu.nl/home/index.cfm.
Cost A STREAM-DEMO tool can be acquired for free. After registering, a free copy of the Model
can be obtained through the IVM – STREAM Website. The development of a first order
Internet-based STREAM for a new river basin can be accomplished within a month.
References See http://www.geo.vu.nl/users/ivmstream/ for list of STREM references.
Page 4-60
Description This is an economic-engineering optimization model of California’s inter-tied water supply
system, based on the US Army Corps of Engineers HEC-PRM software. Data on surface and
ground water hydrology, infrastructure connectivity and capacities, operating costs, economic
values for water deliveries, and environmental flow constraints are combined with an
optimization solver to identify promising integrated water management strategies coving
surface water ground water, water conservation, water market, water reuse, and desalination
water management options.
Appropriate Use This is a screening model for planning and policy purposes.
Scope Models for US California, its sub-regions, and Baja California, Mexico.
Key Output Costs, marginal economic values, and monthly water management decisions are provided for
the time series of hydrologic data provided.
Key Input Surface and ground water inflows (time series), system connectivities and infrastructure
capacities, operating costs, economic values for water deliveries, water loss coefficients,
evaporation rates.
Ease of Use Not easy.
Training Required 3-4 day course, plus prior modeling experience and familiarity with water management
systems
Training Available Short courses are available from UC Davis, UABC-Ensenada, and several California
consultants.
Computer Regular desktop computer.
Requirements
Documentation See http://cee.engr.ucdavis.edu/faculty/lund/CALVIN/.
Applications Statewide and regional water models of US California and Baja California, Mexico.
Applications include: valuing infrastructure expansions, water markets and transfers,
conjunctive use, integrated resource management, climate warming adaptation, adaptation to a
repeat of a severe and sustained paleodrought, Hetch Hetchy dam removal, Colorado River
restoration, etc.
Contacts for Tools, See http://cee.engr.ucdavis.edu/faculty/lund/CALVIN/.
Documentation,
Technical
Assistance
Cost Software is free.
Page 4-61
CALVIN (CALifornia Value Integrated Network) (cont.)
References Thirteen peer-reviewed publications, a few included below. See
http://cee.engr.ucdavis.edu/faculty/lund/CALVIN/ for these and reports and non-peer-reviewed
publications.
Draper, A.J., M.W. Jenkins, K.W. Kirby, J.R. Lund and R.E. Howitt. 2003. Economic-
Engineering Optimization for California Water Management. Journal of Water Resources
Planning and Management 129(3):155-164.
Jenkins, M.W., J.R. Lund, R.E. Howitt, A.J. Draper, S.M. Msangi, S.K. Tanaka, R.S. Ritzema
and G.F. Marques. 2004. Optimization of California’s Water System: Results and Insights.
Journal of Water Resources Planning and Management 130(4): 271-280.
Medellin-Azuara, J., J.J. Harou, M.A. Olivares, K. Madani-Larijani, J.R. Lund, R.E. Howitt,
S.K. Tanaka, M.W. Jenkins and T. Zhu. In press. Adaptability and Adaptations of California’s
Water Supply System to Dry Climate Warming. Climatic Change.
Medellín-Azuara, J., J.R. Lund and R.E. Howitt. 2007. Water Supply Analysis for Restoring
the Colorado River Delta, Mexico,” Journal of Water Resources Planning and Management
133(5): 462-471.
Null, S. and J.R. Lund. 2006. Re-Assembling Hetch Hetchy: Water Supply Implications of
Removing O'Shaughnessy Dam. Journal of the American Water Resources Association
42(4):395 – 408.
Pulido-Velázquez, M., M.W. Jenkins, and J.R. Lund. 2004. Economic Values for Conjunctive
Use and Water Banking in Southern California. Water Resources Research 40(3).
Tanaka, S.K., T. Zhu, J.R. Lund, R.E. Howitt, M.W. Jenkins, M.A. Pulido, M. Tauber, R.S.
Ritzema and I.C. Ferreira.2006. Climate Warming and Water Management Adaptation for
California. Climatic Change 76(3-4):361-387.
Page 4-62
Description OSWRM is created in system dynamics software (STELLA). The model simulates water
resource supply and demand, including residential (municipal), agricultural, and instream flow
requirements. Included are population growth and climate change and how they affect both
supply and demand.
The tool was developed in 2005 within a stakeholder dialogue process that focused on the
potential role of climate change in management of their water resources. The tool helped to
combine scientifically-generated plausible scenarios with on-the-ground knowledge of water
management operations and policies, as well as the social acceptability of potential adaptation
options. The tool supported dialogue by providing a common focal point and testing
participants’ assumptions about the current and future state of the water resources.
Appropriate Use The purpose of the tool is to explore and learn about the system, particularly in group settings
among stakeholders. The tool is not intended for policy design, but to support dialogue on
which policies may be most effective and warrant more detailed study (and also, which ones
will not be effective).
Scope The tool is specifically designed for the Okanagan Basin, British Columbia, Canada.
Key Output The results of the process are the OSWRM (model), analysis of future scenarios, and the
experience of those who participated in the model development workshops.
Key Input The model is populated with data for hydrologic and crop water demand scenarios based on
Merritt and Alila 2006, Neilsen et al. 2006, Neale et al., in press, Neale 2005, along with an
array of population growth scenarios, so no additional information is required to run the model.
The user has the option to select the climate and population scenario, and then to test a number
of adaptation options.
Ease of Use The model was designed for use by stakeholders of different backgrounds. The user interface
is separate from the model design layer and is relatively easy for the lay-person to use.
Training Required It is possible for individuals to use the model without training; however, the model was
intended for use within group settings for the purpose of stimulating dialogue.
Training Available See documentation.
Computer STELLA software is needed to run the model. You may download either a demo version or a
Requirements model viewer from the company’s website: www.iseesystems.com
Documentation A quick user guide and model documentation references are available in the appendices of
both Cohen and Neale 2006 (Final report) and Langsdale 2007 (Dissertation).
Applications OSWRM was developed within a year-long stakeholder engagement process. Five workshops
were held to engage the Okanagan Basin’s water resource community (professionals and other
interested parties) in guiding model development and in exploring plausible futures. This
process is described in the references listed below.
Contacts for Tools, Stacy Langsdale, NRC Research Fellow, Institute for Water Resources, Alexandria, VA;
Documentation, e-mail: slangsdale@gmail.com.
Technical Stewart Cohen, Adaptation and Impacts Research Division (AIRD), Environment Canada,
Assistance located at Dept. of Forest Resources Management, University of British Columbia, Vancouver
BC; e-mail: Stewart.Cohen@ec.gc.ca.
Jeff Carmichael, Adjunct Faculty, Institute for Resources Environment & Sustainability,
University of British Columbia, Vancouver; e-mail: Jeff.Carmichael@gvrd.bc.ca.
Page 4-63
OSWRM (Okanagan Sustainable Water Resources Model) (cont.)
Cost STELLA software is available from ISEE for US$650 (price for educators/researchers). The
price for professionals is US$1900. Documentation for the software costs US$50. Current
information on prices is available from the ISEE website (www.iseesystems.com). Regarding
the research study that supported Dr. Langsdale (Cohen and Neale, 2006), the study was two
years in duration, but was built on previous work that extended over 5 years. The study
included direct support for Dr. Langsdale’s time and for the group-based process (workshops,
facilitation, and travel to the study area). Costs to develop a similar tool will depend on
availability of information on the system of interest, scenario-based projections of impacts, and
information on locally available adaptation measures.
The current version of OSWRM is freely available.

References Beall, A., L. Zeoli, et al. 2006. Participatory Modeling for Adaptive Management: Reports
from the Field. Proceedings of the 24th International Conference of the System Dynamics
Society, Nijmegen, The Netherlands.
Beall, A. and A. Ford. 2007. Participatory Modeling for Adaptive Management: Reports
from the Field II. Proceedings of the 25th International Conference of the System Dynamics
Society, Boston.
Beall, A. 2007. Participatory Environmental Modeling and System Dynamics: Integrating
Natural Resource Science and Social Concerns. Ph.D. Thesis. Washington State University,
Pullman Washington.
Cohen, S. and T. Neale (eds.). 2006. Participatory integrated assessment of water
management and climate change in the Okanagan Basin, British Columbia. Final report,
Project A846. Submitted to Natural Resources Canada, Ottawa. Environment Canada and
University of British Columbia, Vancouver, 188p.
Langsdale, S. M. 2007. Participatory Model Building for Exploring Water Management and
Climate Change Futures in the Okanagan Basin, BC, Canada. PhD Dissertation. University of
British Columbia.
Langsdale, S. 2007. Communication of Climate Change Uncertainty to Stakeholders Using
the Scenario Approach. J. of Contemporary Water Research & Education: 138.
Langsdale, S., A. Beall, J. Carmichael, S. Cohen, and C. Forster. In Press. An Exploration of
Water Resources Futures under Climate Change using System Dynamics Modeling.
Integrated Assessment Journal. The Integrated Assessment Society.
Langsdale, S., A. Beall, J. Carmichael, S. Cohen, and C. Forster. 2006. Managing water
resources and climate change using group model building. Proceedings of the Adaptive
Management of Water Resources Summer Specialty Conference. American Water Resources
Association, Missoula, MT.
Langsdale, S. A. Beall, J. Carmichael, S. Cohen, C. Forster, and T. Neale. In review.
Participatory Modeling to Explore the Implications of Climate Change on Water Resources in
the Okanagan River Basin, British Columbia, Canada. Journal of Water Resources Planning
and Management.
Langsdale, S., A. Beall, et al. 2006. Ch. 5: Exploring Water Resources Futures with a System
Dynamics Model. Participatory Integrated Assessment of Water Management and Climate
Change in the Okanagan Basin, British Columbia, Canada: Final Report. S. Cohen and T.
Neale (eds.). Vancouver, Environment Canada and UBC.
Page 4-64
OSWRM (Okanagan Sustainable Water Resources Model) (cont.)
References Langsdale, S., A. Beall, et al. 2006. Ch. 4: Shared Learning Through Group Model Building.
continued Participatory Integrated Assessment of Water Management and Climate Change in the
Okanagan, British Columbia, Canada: Final Report. S. Cohen and T. Neale (eds.). Vancouver,
Environment Canada and UBC.
Langsdale, S., A. Beall, et al. 2006. Managing water resources and climate change using group
model building. Proceedings of the Adaptive Management of Water Resources Summer
Specialty Conference, American Water Resources Association (AWRA), Missoula, Montana.
Merritt, W. S., Y. Alila, et al. 2006. Hydrologic response to scenarios of climate change in the
Okanagan Basin, British Columbia. Journal of Hydrology 326:79-108.
Neale, T. 2005. Impacts of Climate Change and Population Growth on Residential Water
Demand in the Okanagan Basin, British Columbia. School of Environment and Sustainability.
Victoria, B.C., Royal Roads University.
Neale, T., J. Carmichael and S. Cohen. In press. Urban Water Futures: A multivariate analysis
of population growth and climate change impacts on urban water demand in the Okanagan
Basin, BC. Canadian Water Resources Journal.
Neilsen, D., C. A. S. Smith, et al. 2006. Potential impacts of climate change on water
availability for crops in the Okanagan Basin, British Columbia. Canadian Journal of Soil
Science 86: 921-936.
Winz, I., G. Brierley and R. Cavana. The Use of System Dynamics Simulation in Integrated
Water Resource Management. Proceedings of the 25th International Conference of the System
Dynamics Society, Boston.
Page 4-65
Description The European Flood Alert System is a flood forecasting system currently under development
and testing at the European Commission DG Joint Research Centre in close collaboration with
National Hydrological and Meteorological Services. The system was launched by the
European Commission following the devastating Elbe and Danube floods in 2002 with the aim
to provide National Hydrological Services with medium-range flood forecasting information
on river basin scale across Europe. Technically, EFAS is based on the physically-based
distributed hydrological model LISFLOOD and is driven by observed meteorological data and
medium-range weather forecasts including full sets of Ensemble Prediction System. Its output
consists of probabilistic information on floods in the medium-range (3-10 days) for trans-
national river basins in Europe. In case that a high probability of flooding is forecasted in 3-10
days, the partner organizations are contacted with detailed information from the EFAS system.
EFAS outputs are also evaluated against historic observations and skill is assessed through
case study analysis and statistical skill score assessments. One important objective of EFAS is
to further research in probabilistic flood forecasting in operational applications. It is planned
that the pre-operational system will be transferred to an operational entity by 2010.
Appropriate Use EFAS results are not public information but provided only to experts, e.g. hydrological experts
in the National Hydrological Services, as early flood warning information. EFAS ensures that
the partners are informed about EFAS output through training documents and workshops and
understand how to understand the probabilistic results.
Scope EFAS covers medium-large trans-national river basins in Europe.
Key Output Medium-range flood probability maps, ensemble streamflow output, meteorological rainfall
information, media-monitoring on floods made accessible through a web-based interface.
Key Input Key input can be split into dynamic data, e.g. observed meteorological data, rainfall,
temperature, evaporation, weather forecast data including EPS, observed discharge data, and
static data, e.g. maps of topography, land-use, soil, river network.
Ease of Use EFAS information consists of specific products for flood forecasting experts and therefore
requires a good understanding of flood forecasting and hydrological processes. The
information is made accessible through a web-interface which is easy to use. Concise manuals
and training documents guide the user through the different applications and online
explanation is also provided directly through the web interface.
Training Required Expert knowledge on hydrological forecasting is required to understand the specific products
and how to use them. Training is provided through documents, meetings and discussions.
Training Available Training documents, manuals, meetings.
Computer In order to run EFAS as a system a Linux cluster is needed, a database and a substantial file
Requirements storage system for model input/output (capacity in the order of several TBytes). The system is
programmed in a dynamic GIS language (PCRaster) and Python scripting. In order to view the
results, the EFAS web-interface is based on Windows and accessible through any web
browser.
Documentation Documentation can be found on the EFAS webpage http://efas.jrc.it.
Applications Since 2005 EFAS information is provided to about 24 National hydrological services across
Europe in case flooding is forecasted more than 3 days in advance. The system was active and
successful during a number of serious floods in the past, including the Danube floods in 2005
and 2006, the Elbe floods in 2006, Rhine floods 2007. Medium-smaller scale floods were also
covered by EFAS and reported to the partner organizations.
Page 4-66
European Flood Alert System (EFAS) (cont.)
Contacts for Tools, General information can be found at http://efas.jrc.it . Contact points for specific questions on
Documentation, EFAS at the Joint Research Centre are ad.de-roo@jrc.it and jutta.thielen@jrc.it.
Technical
Assistance
Cost General Information on EFAS and its research results are provided free of charge. Flood
forecast information can only be provided on formal agreement to experts in National
Hydrological Services and are free of charge.
References For an updated list of references find information on the EFAS webpage: http://efas.jrc.it.
De Roo, A., B., Gouweleeuw, J. Thielen, P. Bates, A. Hollingsworth, et al. 2003. Development
of a European Flood Forecasting System. International Journal of River Basin Management
1(1):49-59.
De Roo, A., J. Thielen and B. Gouweleeuw. 2002. LISFLOOD, a distributed water balance,
flood simulation and flood inundation model. User manual. Version 1.0. Report of the
European Commission, Joint Research Centre, Special Publications No. I.02.131.
De Roo, A., M.H. Ramos, J. Thielen, G. Franchello, J. Bartholmes, K. Wachter, S. Niemeyer,
M. Kalas, G. Laguardia and J. van der Kniff. 2006. The Alpine floods of August 2005. What
did EFAS forecast, what was observed, which feedback was received from end-users? EFAS
Post-event summary report, European Commission, EUR 22154 EN, 94pp.
Feyen, L., J.A. Vrugt, B. Ó Nualláinc, J. van der Knijff and A. de Roo. 2007. Parameter
optimisation and uncertainty assessment for large-scale streamflow simulation with the
LISFLOOD model. Journal of Hydrology 332(3-4):276-289.
Gouweleeuw, B., J. Thielen, G. Franchello, A. de Roo and R. Buizza. 2005. Flood forecasting
using medium-range probabilistic weather prediction. Hydrological and Earth System Sciences
9(4):365-380.
Gouweleeuw, B., P. Reggiani and A. De Roo (eds.). 2004. A European Flood Forecasting
System EFFS. Full Report. European Report EUR 21208, EC DG JRC & WL Delft
Hydraulics, 304pp.
Kalas M., M.H- Ramos, J. Thielen and G. Babiakova. In press. Evaluation of the medium-
range European flood forecasts for theMarch - April 2006 flood in the Morava River. Journal
of Hydrology and Hydromechanics.
Ramos. M.H., J. Bartholmes, J. Thielen-del Pozo. Development of decision support products
based on ensemble forecasts in the European Flood Alert System, submitted to Atmospheric
Science Letters.
Thielen, J., J. Bartholmes, M.-H. Ramos, M. Kalas, J. van der Knijff and A. de Roo. 2006.
Added value of ensemble prediction system products for medium-range flood forecasting on
European scale. In: Proceedings of the workshop “Ensemble Predictions and Uncertainties in
Flood Forecasting”, International Commission for the Hydrology of the Rhine Basin (CHR),
Bern Switzerland, 30-31 March 2006, p.77-82.
Thielen J., M.H. Ramos, J. Bartholmes, A. de Roo H. Cloke, F. Pappenberger and D. Demeritt.
2005. Summary report of the 1st EFAS workshop on the use of Ensemble Prediction System in
flood forecasting, 21-22nd November 2005, Ispra. European Report EUR 22118 EN, European
Commission 2005, 23pp.
Van Der Knijff, J. and A. de Roo .2006. LISFLOOD – distributed water balance and flood
simulation model. User manual (2006), European Commission Report EUR 22166 EN, 60pp.
Page 4-67
4.3 Coastal Resources Tools
Sea level rise is now accepted as an inevitable consequence of global warming. In addition, the
impacts of climate change will include possible increases to sea surface temperatures, greater
variability in the patterns of rainfall and runoff, possible changes to wave climate, changes to the
frequency, intensity and duration of storms, and changes to ocean chemistry. In light of this, the
coast is regarded as one of the most vulnerable areas on the planet and is increasingly the focus
for assessments of vulnerability and adaptation to climate change. This compendium describes a
range of the tools and methods applied globally to support this activity.
Tools can also be described as ‘first’, ‘second’ and ‘new generation’ tools. First generation are
older tools that have, in many cases, been superseded by more recent techniques. Second
generation tools are relatively recent and are still widely applied in the process of coastal V&A
assessment whereas those described as ‘new generation’ are in the early stages of application and
have yet to be thoroughly validated.
The evolution of assessment techniques is marked by:

• Improved consideration of uncertainties involved in climate and impact projections;
• Increased integration of climatic and non climatic stressors;
• More realistic recognition of the potential for and limitations to societal responses;
• Increased importance of stakeholder involvement; and
• A purposeful shift form science driven vulnerability assessment to policy driven
vulnerability reduction1.
Many criteria can be used to classify vulnerability assessments. Tools described here are
considered within three categories:
1. Qualitative
2. Semi qualitative
3. Quantitative & specific
In general, methods employed are concerned with establishing the current physical condition of
the coast, considering variability of each condition in the face of ongoing natural environmental
factors, and evaluating the likely response to climate change and associated sea level rise.
1
Abuodha, PA & Woodroffe, CD, 2006. International assessments of the vulnerability of the coastal zone to climate
change, including an Australian perspective Final Report submission to Australian Greenhouse Office in response to
RFQ 116/2005DEH
Page 4-68
Table 4.3. Tools covered in coastal sector
Inter-governmental Panel on Climate Change (IPCC) Common
Methodology (CM)
Bruun Rule
SURVAS
CoastClim of Simulator of Climate Change Risks and Adaptation
Initiatives (SimClim)
ReefResilience Toolkit
Smartline
Page 4-69
Inter-governmental Panel on Climate Change (IPCC) Common Methodology (CM)
Description Widely used framework for vulnerability assessment first proposed in 1991. CM
incorporates expert judgment and data analysis of socioeconomic and physical
characteristics to assist the user in estimating a broad spectrum of impacts from sea-level
rise, including the value of land and wetlands lost. It presents a list of analyses that should
be done, but does not explicitly instruct the user on how to perform the analyses.
Information from this methodology is generally used as a basis for further physical and
economic modelling. The user follows seven steps: (1) delineate the case study area; (2)
inventory study area characteristics; (3) identify the relevant socioeconomic development
factors; (4) assess the physical changes; (5) formulate response strategies; (6) assess the
Vulnerability Profile; (7) identify future needs. Adaptation focuses around three generic
options: retreat, accommodate or protect.
Appropriate Use This approach is most useful as an initial, baseline analysis for country level studies where
little is known about coastal vulnerability.
Scale CM can be used in sub-national, national, regional and global analysis.
Key Output Vulnerability profile and the list of future policy needs to adapt both physically and
economically. A range of impacts of sea-level rise, including land loss and associated value
and uses, wetland loss, etc.
Key Input Physical and socioeconomic characteristics of the study area.
Ease of Use Requires considerable knowledge on a range of techniques for estimating biophysical and
socioeconomic impacts of sea level rise and adaptation. It has been criticised and
redesigned by several groups of researchers.
Training Required Significant training required to complete the seven steps (weeks or months); often
performed by external consultants rather than in-country experts.
Computer Methodology does not explicitly state how to perform analyses; analytical method chosen
Requirements by the user will determine the computer needs.
Documentation Original documentation from 1991 is unavailable. Update provided in IPCC CZMS (1992)
International IPCC CZMS (1992), Nicholls (1995, 1998a, 1998b)
studies Bijlsma et al. (1996)
Nicholls and Mimura (1998)
Klein and Nicholls. (1999)
Contacts for Tools, Coastal Zone Management Centre, P.O. Box 20907, NL-2500 EX, The Hague, The
Documentation, Netherlands; Tel: 1.70.311.4364, Fax: 31.70.311.4380.
Tech. Assistance
Cost No cost to obtain documentation.
Validity Used in many coastal countries. Examples of studies:
Harvey et al.(1999a), Harvey et al (1999b), Kay et al. (1996),
Kay et al. (1992), McLean and Mimura (1993), Morvell (1993a, 1993b), Waterman
(1996), Woodroffe and McLean (1993)
Page 4-70
Description The UNEP methodology establishes a generic framework for thinking about and responding to
the problems of sea level rise and climate change.
The user goes through the following seven guiding steps: (1) define the problem, (2) select the
method, (3) test the method, (4) select scenarios, (5) assess the biogeophysical and
socioeconomic impacts, (6) assess the autonomous adjustments, and (7) evaluate adaptation
strategies. The last step is itself split into seven substeps. At each step, methods are suggested
but the choice is left up to the user.
Appropriate Use This approach is useful in a range of situations, including subnational, or national level studies.
It could comprise the first study, or follow earlier studies such as those completed using the
IPCC Common Methodology. The possibility of a quick screening assessment followed by a
more detailed vulnerability assessment has been suggested (Klein and Nicholls, 1999).
Information gathered with this methodology can then be used as input for future modeling.
Scope Coastal; and scale; sub-national, national, regional and global analysis.
Key Output Evaluation of a range of user-selected impacts of sea level rise and potential adaptation
strategies according to both socioeconomic and physical characteristics.
Key Input Qualitative or quantitative physical and socioeconomic characteristics of the national coastal
zone.
Ease of Use Fairly simple framework. As the level of analysis is not prescribed, the ease of use will depend
on the level of analysis that is attempted.
Training Required Depends on user expertise and the level of analysis that is attempted, but it is likely that some
training is required to complete the seven steps.
Training Available No formal training currently offered, although technical assistance is available for countries
within the UNEP program.
Computer No explicit requirements, although using information in this framework for future modeling will
Requirements require computers.
Documentation Feenstra, J., I. Burton, J. Smith, and R. Tol (eds.). United Nations Environment Programme,
Nairobi, and Institute for Environmental Studies, Vrije Universiteit, Amsterdam. (Version 2.0).
http://www.falw.vu.nl/images_upload/151E6515-C473-459C-85C59441A0F3FB49.pdf.
Klein, R.J.T. and R.J. Nicholls. 1998. Coastal zones. Chapter 7 in Handbook on Methods for
Climate Change Impact Assessment and Adaptation Strategies (Version 2.0).
Applications Used in several countries, including the Cameroon, Antigua and Barbuda, Estonia, Pakistan,
Cuba, Grenada, Guyana and Barbados.
Contacts for Tools, Dr. Michiel van Drunen, Institute for Environmental Studies, Vrije Universiteit, Amsterdam;
Documentation, Tel: +31.20.5989534; e-mail: michiel.van.drunen@ivm.falw.vu.nl.
Technical
Assistance
Cost No cost to obtain documentation.
Page 4-71
UNEP Handbook Methodology (cont.)
References Klein, R.J.T. and R.J. Nicholls. 1999. Assessment of coastal vulnerability to climate change.
Ambio, 28(2):182-187.
Klein, R.J.T., R.J. Nicholls, and N. Mimura. 1999. Coastal adaptation to climate change: Can
the IPCC Technical Guidelines be applied? Mitigation and Adaptation Strategies for Global
Change, 4:51-64.
Klein, R.J.T., R.J. Nicholls, S. Ragoonaden, M. Capobianco, J. Aston, and E.N. Buckley. 2001.
Technological options for adaptation to climate change in coastal zones. Journal of Coastal
Research 17(3):531-543.
Nicholls, R.J. 1998. Coastal Vulnerability Assessment for Sea-Level Rise: Evaluation and
Selection of Methodologies for Implementation. Technical Report TR098002, Caribbean
Planning for Adaptation to Global Climate Change (CPACC) Project.
Page 4-72
Bruun Rule
Description The first and best known model relating shoreline retreat to an increase in local sea level is
that proposed by Per Bruun (1962). The IPCC reports that 1 cm rise in sea level erodes
beaches about 1 m horizontally. This becomes a large issue for developed beaches that are
less than 5 m from the ocean (IPCC, 1998). The Bruun rule states that a typical concave-
upward beach profile erodes sand from the beach face and deposits it offshore to maintain
constant water depth. The Bruun rule can be applied to correlate sea-level rise with eroding
beaches. The Bruun rule estimates the response of the shoreline profile to sea-level rise. This
simple model states that the beach profile is a parabolic function whose parameters are
entirely determined by the mean water level and the sand grain size. The analysis by Bruun
assumes that with a rise in sea level, the equilibrium profile of the beach and shallow
offshore moves upward and landward. The analysis is two-dimensional and assumes that (1)
the upper beach is eroded due to the landward translation of the profile and (2) The material
eroded from the upper beach is transported immediately into the offshore and deposited, such
that the volume eroded is equal to the volume deposited; and (3) The rise in the nearshore
bottom as a result of deposition is equal to the rise in sea level, thus maintaining a constant
water depth in the offshore (SCOR, 1991).
Appropriate Use The Bruun rule is only applicable for small scale local sites.
Scale Over long stretches of coast, the Bruun rule and associated cross-shore transport models
become complex. There has been a number of critiques e.g. Cooper and Pilkey (2004)
Key Output Shoreline recession (in metres relative to sea-level rise).
Key Input An increase in sea level, (S), cross shore distance (L) to the water depth (h) taken by Bruun
as the depth to which nearshore sediments exist (depth of closure), and B is the height of the
dune.
Ease of Use Easy to use with numerous assumptions.
Training Required Familiarity with the coastal zone being investigated.
Computer None, unless it is incorporated into a model.
Requirements
Documentation Originally proposed by Per Bruun in 1962
International Bruun (1962, 1988)
studies
Contacts for Tools, See applications above.
Documentation,
Technical
Assistance
Cost No cost to use the Bruun rule.
Validity Bruun rule has been applied but caution needs to be exercised where other factors influence
sediment budget or control profile.
Page 4-73
SURVAS
Description The SURVAS (Synthesis and Upscaling of Sea-level Rise Vulnerability Assessment Studies)
project developed a global assessment of vulnerability of the coastal zone using a common
assessment methodology, identifying key indicators for the assessment of coastal natural
susceptibility and socio-economic vulnerability and resilience to the impact of climate
change, particularly accelerated sea-level rise.
Appropriate Use For the assessment of coastal natural susceptibility and socio-economic vulnerability and
resilience to the impact of climate change, particularly accelerated sea-level rise.
Scale SURVAS can be applied in sub-national, national, regional and global analysis.
Key Output Workshop reports (see international references).
Key Input Expert knowledge in workshop context.
Ease of Use Depends upon consensus between experts.
Training Required Expert judgement required.
Computer Is required when modeling.
Requirements
Documentation The SURVAS database http://www.survas.mdx.ac.uk/sitemap.htm
International Workshops held in Egypt, Germany and UK. Examples of studies:
studies SURVAS (2000a, 2000b, 2001)
Nicholls (2000)
Contacts for Tools, See documentation above.
Documentation,
Technical
Assistance
Cost No cost to use the approach.
Validity During a SURVAS overview workshop in UK in 2001 it was reported that geological,
historical and current sea-level data exists. Other data include those from UNFCCC and NC
as well as data on present coastal erosion and storminess climate variability.
Page 4-74
Description Dynamic Interactive Vulnerability Assessment (DIVA) is a tool for integrated assessment of
coastal zones produced by the EU-funded DINAS-Coast consortium in 2004. It is
specifically designed to explore the vulnerability of coastal areas to sea-level rise. It
comprises a global database of natural system and socioeconomic factors, relevant scenarios,
a set of impact-adaptation algorithms and a customized graphical-user interface. Factors that
are considered include erosion, flooding salinisation and wetland loss. DIVA is inspired by
the paper-based Global Vulnerability Assessment (Hoozemans et al., 1993), but it represents
a fundamental improvement in terms of data, factors considered (which include adaptation)
and use of PC technology.
Appropriate Use DIVA is designed for national, regional and global scale analysis of coastal vulnerability,
including consideration of broad adaptation issues.
Scale DIVA covers all 180+ coastal nations in 12,148 coastal segments at national, regional, and
global scales.
Key Output The impacts of sea-level rise under a range of different user-defined scenarios, including
some adaptation options. For each SRES the program produces a table, a map and chart.
Key Input The user’s chosen scenarios.
Ease of Use The software is explicitly intended to be easy to use, and draws on extensive experience in
graphical user interfaces.
Training Required Designed to be used without significant training — an interested user should be able to
explore this tool without any training.
Training Available If required, contact DINAS-COAST consortium — see contacts below.
Computer Windows 2000/XP, 2 GHz Pentium, 512 MB memory, 5 GB free hard drive.
Requirements
Documentation Included with the DIVA tool.
International DIVA has been used to develop assessments of wetland loss and the effects of mitigation.
studies Examples of studies are;
Hoozemans et al. 1993
Nicholls (2002)
Hinkel and Klein. (2003)
Vafeidis et al. (2003, 2004a, 2004b)
Contacts for Tools, http://diva.demis.nl/
Documentation, Jochen Hinkel Potsdam Institute for Climate Impact Research, Germany; e-mail:
Technical hinkel@pik-potsdam.de.
Assistance
Cost Free download from http://diva.demis.nl/
Validity DINAS-Coast database contains limited segments for many areas.
Page 4-75
CoastClim of Simulator of Climate Change Risks and Adaptation Initiatives (SimClim)
Description The Simulator of Climate Change Risks and Adaptation Initiatives (SimClim) software
enables examination of future climate scenarios in several contexts. The method features a
separate consideration for sea-level rise (sea-level generator) due to climate change and
global warming and that resulting from local land movements. One of the distinct advantages
of using the generator is that it allows rapid generation of place-based sea-level scenarios,
which account for some uncertainties associated with emissions scenario, but may not
account for isostatic change. SimClim also includes a set of developed impact models. For
the coastal zone, the focus is on erosion and flooding. The simple erosion model is a
modified version of the Bruun Rule, which takes into account storm effects, local sea-level
trends and lag effects in order to provide time-dependent response of the shoreline to sea-
level rise at selected sites. The coastal flood model is spatial and allows the user to examine
changes in the areas of potential inundation from the combined effects of sea-level rise and
extreme storm events. The purpose of SimClim is to link and integrate complex arrays of
data and models in order to simulate, temporally and spatially, bio-physical impacts and
socio-economic effects of climatic variations, including extreme climatic events. In this way,
it provides the foundation for assessing options for adapting to the changes and reducing the
risks. SimClim is designed to support decision-making and climate proofing in a wide range
of situations where climate and climate change pose risk and uncertainty.
Appropriate Use A tool to aid decision-making under changed climate conditions.
Scale SimClim can be applied in sub-national, national, regional and global analysis.
Key Output Current shoreline (m).
Key Input For the coastal erosion model part of SimClim, one requires; shoreline response time, closure
distance (m), depth of material exchange (m), dune height (m) and residual movement
(m/year) and well as storm parameters.
Ease of Use The distinctive advantage of the SimClim open system, as opposed to the hard-wired system,
is the flexibility afforded to users for importing their own data and models in order to
customise the system for their own purposes – much like a GIS.
Training Required Training is useful.
Training Available Training can be arranged by contacting Peter Urich at management@climsystems.com or
www.climsystems.com/site/home
Computer Knowledge of computer is required.
Requirements
Documentation Included with the SimClim software.
International Kenny et al (1999, 2000)
studies Warrick et al (1996, 2005)
Contacts for Tools, Climsystems Ltd, P. O. Box 638, Hamilton, New Zealand.
Documentation, Climsystems Home. http://www.climsystems.com/site/home/
Technical
Assistance
Cost There is a cost to the use of the software. Contact Peter Urich (see documentation).
Validity The coastal impact model of SimClim is a possible tool to use in coastal zones.
Page 4-76
Description Community Vulnerability Assessment Tool (CVAT) supports the linking of environmental,
social and economic data in the coastal zone. It is a static GIS map overlay procedure that
enables a relative risk or vulnerability analysis of coastal communities to a series of existing
threats. The CVAT procedure comprises 7 steps; (1) Hazard identification and prioritisation,
(2) Hazard analysis, (3) Critical Facilities analysis, (4) Social analysis, (5) Economic
analysis, (6) Environmental analysis and (7) Mitigation opportunities analysis. A CD-ROM
provides a step-by-step guide for conducting community-wide risk and vulnerability
assessments. It also provides an illustrative case study demonstrating the process for
analysing physical, social, economic and environmental vulnerability to hazards at the local
level. It contains a detailed case study on New Hanover county, North Carolina, which
illustrates the use of the Community Vulnerability Methodology Assessment methodology
in a specific community.
Appropriate Use Used to conduct a community vulnerability assessment to a range of hazards (not
specifically addressing climate change).
Scale The assessment focuses on the community level.
Key Output Relative risk or vulnerability analysis of coastal communities to a series of existing threats.
Key Input Environmental, social and economic data for the coastal zone in GIS format.
Ease of Use The CD-ROM is relatively easy to use.
Training Required It provides a framework for vulnerability and risk assessment, which allows communities to
carry out the assessment. CVAT is most useful for people who wish to gain an understanding
of how to conceptualise community vulnerability.
Training Available The NOAA coastal services offers training on how to do a risk and vulnerability assessment.
More information on this training is available at
www.csc.noaa.gov/training/cvat-tool.html
Computer The following options are available for using the information on the CD-ROM (1) Web-
Requirements Browser for viewing text, images, and static maps and (2) ArcExplorer GIS Data Explorer
(free software included). ArcView GIS (ArcView 3.0 or higher required to interact with one
component of the case study on the CD-ROM)
Documentation See below for contacts. The CD-ROM contains a number of tutorials designed to assist in
hazard planning activities. These tutorials include vulnerability assessment tutorials, LIDAR
tutorials and extensions and damage assessment tool tutorial.
International National Oceanic and Atmospheric Administration (NOAA) Coastal Services Center (CSC)
studies (1997, 1999)
Albury (2004)
Clark et al. (1998)
Cutter (1996)
Cutter et al. (2000, 2003)
Emrich (2000)
Morrow (1999)
Contacts for Tools, To receive a copy of the CD-ROM or any assistance contact: NOAA Coastal Services
Documentation, Center, 2234 South Hobson Avenue, Charleston, South Carolina 29405-2413.e-mail:
Technical clearinghouse@csc.noaa.gov . Resource persons are Tashya Allen at
Assistance Tashya.Allen@noaa.gov and Cindy Fowler at Cindy.Fowler@noaa.gov
Cost There is no cost for the CD-ROM (File size: 0.3MB).
Validity The CVAT tool would require customising to a given environment where there is a different
suite of hazards and access to appropriate data is not as centralised.
Page 4-77
Description COSMO is a decision-support model that allows coastal zone managers to evaluate potential
management strategies under different scenarios, including long-term climate change.
COSMO demonstrates the main steps in the preparation, analysis and evaluation of Coastal
Zone Management (CZM) plans. The program is an interactive tool that allows coastal zone
managers to explore the impacts of development projects and environmental and coastal
protection measures. It calculates various criteria, including long
term effects of climate change, reflecting the use of the coastal zone. The user can explore a
number of predefined cases as an educational tool, or specify new development scenarios
and combinations of measures as a decision-making tool. A more complex version of
COSMO has been developed to demonstrate some more realistic characteristics, constraints
and limitations of institutional arrangements for CZM. The program simulates day-to-day
management of a coastal zone from the perspective of four organizations: (1) the city
government, (2) the public works department, (3) the environment department and (4) the
private sector. Each of these four roles takes annual decisions, within their means/budget and
mandate, to further their own objectives.
Appropriate Use Useful as educational tools about relationship of adaptation to climate change in coastal zone
management. Helps determine the advantages and disadvantages of adaptation alternatives,
either as an educational or decision-support tool, in conjunction with other, more quantitative
analyses.
Scale COSMO can be applied in site-specific case studies or at national scale.
Key Output The outcome of a range of different management options.
Key Input The user’s chosen management strategy.
Ease of Use Easy to use for educational purposes, although unsuitable for analysis of actual management
plans by itself. Might be used within other frameworks, such as studies based on the UNEP
Handbook Methodology.
Training Required For educational purposes it requires little training, although as a decision support tool it
requires more knowledge of physical and socioeconomic characteristics of the situation.
Training Available For training and education services contact: Coastal Zone Management Centre, P.O. Box
20907, NL-2500 EX, The Hague, The Netherlands; Tel: (1-70)311.4364; Fax: (31-70)311-
4380; E-mail. f.vdmenlen@rikz.rws.minvenw.nl
Computer Standard PC (Pentium or better).
Requirements
Documentation See international studies below
International Used in training for CZM, including adaptation to climate change. Examples of studies:
studies Resource Analysis and Coastal Zone Management Centre,
Hoozemans et al. (1993)
Contacts for Tools, Coastal Zone Management Centre, The Hague; Tel: 31.70.3114.364.
Documentation,
Technical
Assistance
Cost US$150 from Coastal Zone Management Centre.
Validity A valid model but is yet to be applied.
Page 4-78
Description The South Pacific Island Methodology is an index-based approach that uses relative scores to
evaluate different adaptation options in a variety of scenarios. The coastal zone is viewed as
six interacting systems. There are three “hard” systems, the natural environment, the people,
and infrastructure, and three “soft” systems, which encompass the less tangible elements of
the coastal system, the institutions, the socio-cultural factors, and the economic system.
These are further divided into subsystems. The user gives each subsystem a vulnerability and
a resilience
score from -3 to +3, based on expert judgment, for the following scenarios: (1) today’s
situation, (2) the future with sea level rise and no management, and (3) the future with sea
level rise and optimum management. For each subsystem, the two values are combined to
produce a sustainable capacity index for each scenario.
Appropriate Use Particularly useful in coastal settings with limited quantitative data but considerable
experience and qualitative knowledge. Can be used during initial evaluation phases to
analyse a range of possible adaptation options. Should be followed by a more quantitative
analysis of the chosen option.
Scale SPIM is regional in scale and most relevant to the South Pacific Islands.
Key Output Defines a sustainable capacity index for the subsystems defined.
Key Input Expert judgment and qualitative information on the relative performance of various
adaptation options.
Ease of Use Relatively easy to use because it requires very little quantitative data.
Training Required Limited training is required, although background knowledge of physical, social, and
economic characteristics of the area is helpful.
Training Available No formal training currently.
Computer None.
Requirements
Documentation Documented in Yamada et al, 1995.
International Used in several Pacific Island countries, including Fiji.
studies Yamada et al (1995)
Kay and Hay (1993)
Nunn et al (1994a, 1994b, 1996)
Mimura and Harasawa (2000)
Contacts for Tools, Prof. N. Mimura, CWES, Ibaraki University 4-12-1 Nakanarusawa, Hitachi, Ibaraki 316,
Documentation, Japan; Tel: 81.294.38.5169.
Technical Prof. P. Nunn, University of the South Pacific, Suva, Fiji; Tel: 679.313.900;
Assistance Fax: 679.301.305.
Cost No cost for documentation, although cost of the analysis itself will depend on the
availability and cost of data and local experts.
Validity Most valid for Island states.
Page 4-79
Description Shoreline Management Planning is a generic approach to the strategic management of the
combined hazards of erosion and flooding hazards in coastal areas, which are key concerns
under climate change and sea-level rise. New approaches to shoreline management have
developed in the United Kingdom over the last 10 years. This involves dividing the coast of
England and Wales into a series of natural units (cells and sub-cells). Based on these units, a
number of shoreline management plans are then developed which collectively cover the
entire coastal length. Each shoreline management plan further divides the coast based on
land use and selects a series of strategic options to be applied over the next 50 to 100 years:
(1) advancing the line; (2) holding the line; (3) managed realignment; (4) limited
intervention; and (5) no active intervention. The practical implementation of these options is
not directly considered — this is considered at lower levels of planning. Whatever is
proposed must be consistent with a suite of Project Appraisal Guidance Notes (PAGN) that
provide guidance (listed at http://www.defra.gov.uk/environ/fcd/pubs/pagn/default.htm). The
Eurosion consortium have taken these approaches and developed them for application across
the European Union (http://www.eurosion.org/).
Appropriate Use SMP has been designed for developed countries with extensive coastal defence
infrastructure. However, these approaches should find widespread application around the
world’s coasts, especially if slightly adapted to local circumstances. SMPs are designed as
“living” plans, including regular update, so the whole process will stimulate the development
of long-term coastal management appropriate to responding to climate change and sea-level
rise.
Scale SMP is applied typically at sub- national to national scales pertinent to strategic flood and
erosion management.
Key Output Strategic approaches for flood and erosion management for the next 50 to 100 years.
Key Input A range of information is required, including, ideally, historical shoreline change,
contemporary coastal processes, coastal land use and values, and appropriate scenarios of
change. However, the first generation of SMPs in England and Wales was conducted with
incomplete datasets.
Ease of Use The methods are designed assuming significant expertise and would be best implemented by
consultants.
Training Required With appropriate consultants this would not be necessary.
Training Available None offered at present.
Computer Depends on the approach adopted.
Requirements
Documentation See International studies.
International Department for Environment, Food and Rural Affairs DEFRA (2001)
studies Ministry of Agriculture, Fisheries and Food (MAFF, 1995)
Leafe et al ( 1998)
Burgess and Hosking (2002)
http://www.eurosion.org/
Contacts for Tools, DEFRA, Flood and Coastal Defence Division (http:/www.defra.gov.uk/).
Documentation, Stephane Lombardo, National Institute for Coastal and Marine Environment/RIKZ,
Technical Kortenaerkade, 1, 2500 EX The Hague, The Netherlands; Tel: + 31.70.3114.369; Fax:
Assistance +31.70.3114.380; e-mail: S.Lombardo@rikz.rws.minvenw.nl.
Cost Free download of DEFRA (2001) from
http://www.defra.gov.uk/environ/fcd/pubs/smp/revisedsmpguidancefinal.pdf.
Page 4-80
Description RamCo and ISLAND MODEL are cell-based decision support tools designed as a means of
asking structured questions about how external and internal components of coastal zone
management problems interact. The socioeconomic system is explicitly defined and can
interact with the physical effects of climate change, as well as regional and global changes to
boundary conditions, such as global trade patterns. These are the prototypes of more general
information systems for decision support.
Appropriate Use Because they are part of an evolving approach, they are excellent educational tools, although
they have been used in analytical situations (see Applications below). Scope of applicability is
currently limited by data availability, although new applications could be developed with the
originators.
Scope All locations where GIS data are available; coastal; regional.
Key Output The outcome of a range of different user-defined scenarios and management options.
Key Input The user’s chosen scenarios and management strategies.
Ease of Use The Demo Guides are easy to follow without training — development of new applications
would be much more difficult.
Training Required Requires little training for educational purposes, although the documentation is only for
demonstration and does not explain how to set up another site for analysis.
Training Available Coastal Zone Management Centre, The Hague, The Netherlands, Tel: 31.70.3114.364.
Computer Pentium or better, Windows 95 or better, Microsoft Excel (version 7.0), IDRISI for Windows.
Requirements See page 15 of documentation.
Documentation Uljee, I., G. Engelen, and R. White. 1996. ISLAND-Demo User Guide, Version 3, Research
Institute for Knowledge Systems, P.O. Box 463, Tongersestraat 6, 6200 AL Maastricht, The
Netherlands.
Uljee, I., G. Engelen, and R. White. 1996. RamCo Demo Guide Version 1.0, Coastal Zone
Management Centre, National Institute for Coastal and Marine Management, PO Box 20907,
2500EX The Hague, The Netherlands.
Applications St. Lucia, Sulawesi.
Contacts for Tools, Coastal Zone Management Centre, National Institute for Coastal and Marine Management, PO
Documentation, Box 20907, 2500EX The Hague, The Netherlands; Tel: 31.70.3114.364.
Technical Modeling and Simulation Research Group, Research Institute for Knowledge Systems BV, PO
Assistance Box 463, Tongerstraat 6, 6200 AL Maastricht, The Netherlands.
Cost US$150 from Coastal Zone Management Centre.
Page 4-81
RamCo and ISLAND MODEL (cont.)
References de Kok, J.L., G. Engelen, R. White, and H. Wind. 2001. Modelling land-use change in a
decision-support system for coastal-zone management. Environmental Monitoring and
Assessment 6:123-133.
Engelen, G., R. White, and I. Uljee. 1993. Exploratory modelling of socio-economic impacts
of climatic change. In Climatic Change in the Intra-Americas Sea. G.A. Maul (ed.). Edward
Arnold, London, pp. 350-368.
Engelen, G., R. White, I. Uljee, and P. Drazen. 1995. Using cellular automata for integrated
modelling of socio-environmental systems. Environmental Monitoring and Assessment
34:203-214.
Engelen, G., R. White, I. Uljee, and S. Wargnies. 1996. Numerical modeling of small island
socio-economics to achieve sustainable development. In Small Islands: Marine Science and
Sustainable Development, Coastal and Estuarine Studies Volume 51, G.A. Maul, (ed.).
American Geophysical Union, Washington, DC. pp. 437-463.
White, R., G. Engelen, and I. Uljee. 2000. Modelling land use change with linked cellular
automata and socio-economic models: A tool for exploring the impact of climate change on
the island of St. Lucia. In Spatial Information for Land Use Management, M. Hill and R.
Aspinall (eds.). Gordon and Breach, pp. 189-204.
Page 4-82
Reef Resilience Toolkit
Description The R2 Toolkit is a ‘living’ toolkit that provides practitioners with the latest tools, strategies,
and protocols to address coral bleaching, conservation of reef fish spawning aggregations, and
general principles of adaptive management that are critical to respond to climate change. The
toolkit is designed primarily for use by Marine Protected Area (MPA) managers, trainers, and
policymakers. Entrusted with protecting coral reefs, they face significant challenges because
these ecosystems are highly vulnerable to the demographic, economic, and environmental
changes expected during the next century. R2 builds on the principle that effective
management is fundamental to ensure reef survival. Currently comprised of two extensive
streams – Coral Bleaching and Reef Fish Spawning Aggregations – the toolkit will help
practitioners begin to build resilience into their coral reef conservation programs so that these
valuable natural systems can survive anticipated rapid changes and provide for escalating
human needs. During 2007 and 2008, the R2 Toolkit is undergoing a major revision, with new
developments in science and management being added, as well as topics relating to other
tropical habitats and social issues. The next version will be launched at the IUCN World
Conservation Congress in Barcelona in October 2008.
Appropriate Use The R2 Toolkit is most appropriate for tropical coastal and marine resource managers, and
especially helpful to coral reef managers and fisheries managers. The R2 Toolkit includes a
great deal of information that is helpful to those designing protected areas and networks, as
well as information on developing monitoring programs, engaging stakeholders, and more. The
R2 Toolkit can be useful to managers at any time/stage as it addresses both the beginnings of
protected area work as well as adaptive management and monitoring.
Scope Although this tool is designed primarily with tropical coral reef systems in mind, the principles
can be applied to almost any marine system. The information is relevant at both local and
regional scales.
Key Output There is no specific output or final product from the R2 Toolkit, given that it is a series of steps
and information that helps to guide managers to design and develop sound management
practices that are flexible and support adaptive management in the face of climate change.
Key Input There are no inputs or information required to use the tool. In cases where there is limited or
no data, expert and local knowledge can be used. There is always a ‘low-tech’ option for
places that have limited information and resources when one is trying to build resilience to
climate change into management activities and strategies.
Ease of Use The R2 Toolkit is easy to maneuver and understand, and is supported by a range of
practitioners and experts that can be consulted for advice and lessons learned. However, to
effectively apply the principles to resource management requires skill, experience, and a
commitment to developing a robust management structure to adapt to climate change and other
unpredictable changes at a site or in a region.
Training Required There is no training required to use these resources. The R2 Toolkit is in a website format so
any person familiar with the internet should be able to navigate the tool.
Training Available A series of regional training sessions have been held in the Caribbean, Southeast Asia, Western
Pacific, South Asia, and Western Indian Ocean. Additional training has occurred in American
Samoa, Australia, MesoAmerican Reef, and the Red Sea. These training sessions covered the
application of resilience principles to real-world situations and problems. There are no
sessions currently scheduled. Future training may occur once the toolkit is revised (Oct 2008)
and a demand for the training develops.
Page 4-83
Reef Resilience Toolkit (cont.)
Computer Certain applications will be needed to view the Toolkits rich-media including: QuickTime,
Requirements Adobe Acrobat Reader, Arc Explorer, and Microsoft Office (Word and PowerPoint). The CD-
ROM includes these media applications. For specific questions on web browser requirements
please contact Stephanie Wear (swear@tnc.org).
System requirements for:
MAC OS X
A 400 MHz PowerPC G3 or faster Macintosh computer, at least 128 MB of RAM, Mac OS X
v10.2.5-10.3.x.
Mac OS 8.6/9
A PowerPC processor-based Macintosh computer, at least 128 MB of RAM, Mac OS 8.6 or
later.
Windows
A Pentium processor-based PC or compatible computer, at least 128 MB of RAM, Win
98/Me/2000/XP.
Documentation There is no user guide, but there is help embedded within the R2 Toolkit.
Applications The principles of resilience highlighted in the R2 Toolkit have been applied in numerous
tropical locations around the globe. Examples of applying resilience principles to the design of
marine protected area network include Kimbe Bay - Papua New Guinea, MesoAmerican Reef,
and the British Virgin Islands. Examples of developing resilience and bleaching monitoring
programs include the Florida Keys, MesoAmerican Reef, and Australia’s Great Barrier Reef.
The toolkit currently includes case study examples and continues to add new examples on a
monthly basis. All of these can be found at www.reefresilience.org. (As of March 2008)
Contacts for Tools, The tool was developed by The Nature Conservancy in collaboration with numerous partners.
Documentation, Please contact Stephanie Wear at swear@tnc.org or resilience@tnc.org for further information
Technical or assistance.
Assistance
Cost Free. CD ROM set available on request and also available at www.reefresilience.org Please
note: user must have reasonable internet connection to use some features of the website (e.g.,
video).
References Publications discussing the use of the tool are expected in the early part of 2008. Some related
documents can be found at:
http://www.iucn.org/dbtw-wpd/edocs/2006-042.pdf IUCN Publication: Coral Reef Resilience
and Resistance to Bleaching.
http://www.iucn.org/dbtw-wpd/edocs/2006-041.pdf IUCN Publication: Managing Mangroves
for Resilience to Climate Change.
http://www.iucn.org/dbtw-wpd/edocs/2006-043.pdf Joint Partner Publication: Reef Manager’s
Guide to Coral Bleaching.
Page 4-84
SmartLine
Description The “Smartline” approach is a method of capturing geographical data in a segmented line
within a Geographical Information System (GIS). The model builds on over six years
experience using a similar approach in the Australian state of Tasmania.
The approach allows:
• Extraction of data from a range of different existing geomorphic maps (in different
formats and with different classifications) and translation of these into a single,
nationally consistent classification; and
• Rapid identification of shores sensitive to physical change or instability resulting
from climate change and sea level rise.
Appropriate Use A key advantage of the model is its ability to rapidly capture a very wide range of information
for a coastal zone at different levels of detail. It also allows many types of data analysis to be
undertaken efficiently. Consequently, the “Smartline” approach is ideal for first pass
assessments of coastal vulnerability.
Scope The information captured is useful for a wide range of management and research purposes in
addition to vulnerability assessment, for example oil spill sensitivity assessments and coastal
natural asset inventories. As such, the methodology provides a very practical means of
mapping useful coastal geomorphic data for countries that do not have the capacity to
undertake major (polygon) geomorphic mapping exercises.
Key Output GIS based geomorphic map of coastal sensitivity.
Key Input The majority of input data may be sourced through aerial photograph and cartographic
analsysis; this includes data on morphology of coast and geographic setting.
Ease of Use The Smartline tools is easy to maneuver and understand, and is supported by a range of
practitioners and experts that can be consulted for advice and lessons learned. However, initial
development of a Smartline mapping systems requires expert input and training.
Training Required There is no training required to use these resources. The R2 Toolkit is in a website format so
any person familiar with the internet should be able to navigate the tool.
Training Available A series of regional training sessions have been held in the Caribbean, Southeast Asia,
Western Pacific, South Asia, and Western Indian Ocean. Additional training has occurred in
American Samoa, Australia, MesoAmerican Reef, and the Red Sea. These training sessions
covered the application of resilience principles to real-world situations and problems. There
are no sessions currently scheduled. Future training may occur once the toolkit is revised (Oct
2008) and a demand for the training develops.
Computer Certain applications will be needed to view the Toolkits rich-media including: QuickTime,
Requirements Adobe Acrobat Reader, Arc Explorer, and Microsoft Office (Word and PowerPoint). The CD-
ROM includes these media applications. For specific questions on web browser requirements
please contact Stephanie Wear (swear@tnc.org).
System requirements for:
MAC OS X
A 400 MHz PowerPC G3 or faster Macintosh computer, at least 128 MB of RAM, Mac OS X
v10.2.5-10.3.x.
Mac OS 8.6/9
A PowerPC processor-based Macintosh computer, at least 128 MB of RAM, Mac OS 8.6 or
later.
Windows
A Pentium processor-based PC or compatible computer, at least 128 MB of RAM, Win
98/Me/2000/XP.
Documentation There is a user guide provided and help embedded within the application.
Page 4-85
4.4 Human Health Sector Tools
The health tools described in this compendium, listed in Table 4.4, differ significantly in their
scope and application. Some facilitate the investigation of multiple or overall disease burden and
how this burden responds to a number of environmental stressors, including climate change
(MIASMA and Environmental Burden of Disease Assessment). Others are more narrowly
focused and model the health impacts or transmission dynamics of particular diseases (CIMSiM
and DENSiM, LymSim, and MARA LITe). They aid in identifying areas of high risk, and are
particularly useful for areas currently endemic to diseases like malaria, dengue fever, and Lyme
disease or in close proximity to such areas. Modeling adaptation strategies in the health sector is
an emerging field, so the number of tools and approaches available explicitly designed for this
purpose is still limited. The UNFCCC Guidelines is one such example. However, all the human
health tools detailed in this section are suited to examining impacts of climate change on human
health and potential adaptations.
Table 4.4. Tools covered in human health sector

MIASMA (Modeling Framework for the Health Impact
Assessment of Man-Induced Atmospheric Changes)
UNFCCC Guidelines: Methods of Assessing Human Health
Vulnerability and Public Health Adaptation to Climate
Change
LymSiM
Mapping Malaria Risk in Africa (MARA) Low-end
Information Tool (LITe)
Page 4-86
MIASMA (Modeling Framework for the Health Impact Assessment of Man-Induced
Atmospheric Changes)
Description MIASMA is a Windows-based modeling application that models several health impacts of
global atmospheric change and include simulation for several modules: (1) vector-borne
diseases, including malaria, dengue fever, and schistosomiasis; (2) thermal heat mortality; and
(3) UV-related skin cancer due to stratospheric ozone depletion. The models are driven by
both population and climate/atmospheric scenarios, applied across baseline data on disease
incidence and prevalence, climate conditions, and the state of the stratospheric ozone layer.
Appropriate Use MIASMA can be used to link GCM output of climate change or scenarios of stratospheric
ozone depletion to any of the human health outcomes mentioned above. Applicability of this
model is limited only by the scope of available data.
Scope Health; regional and global analysis.
Key Output For the thermal stress module: cardiovascular, respiratory, and total mortality; for skin cancer
module: malignant melanoma and non-melanoma skin cancer; for vector-borne disease
modules: cases and fatalities from malaria, and incident cases for dengue fever and
schistosomiasis.
Key Input Climate input is module or disease specific. For thermal stress, maximum and minimum
temperature are required. For skin cancer, the column loss of the stratospheric ozone over the
site is required to determine the level of UV-B radiation potentially reaching the ground.
Requires maximum and minimum temperature and rainfall. Vector-borne diseases also require
other baseline data, determinable by local experts. For example, for malaria it would help to
know the level of partial immunity in the human population and the extent of drug resistant
malaria in the region.
Ease of Use After a short training, the computer simulations should not be difficult.
Training Required Requires familiarity with computer modeling; some mathematical skills may be beneficial.
Training Available Dr. Pim Martens (see Contacts below).
Computer Pentium PC, 16 MB RAM, Windows 95 or NT4 or higher. For hard drive installation: 20 MB
Requirements free disk space. A monitor resolution of 1074 x 768 is recommended. To view the
documentation and help files, either Netscape Navigator (version 4 or higher) or Microsoft
Internet Explorer (version 4 or higher) is recommended.
Documentation Martens, P. 1998. Health and Climate Change: Modeling the Impacts of Global Warming and
Ozone Depletion. Earthscan Publications, London.
Additional information can be found at http://www.m.rivm.nl/usr/miasma/miasma.htm.
Applications Thermal stress module has been applied to 20 international cities. Skin cancer module has
been applied to The Netherlands and Australia. Vector-borne disease module has been used
globally, malaria module in Zimbabwe, and dengue module for Bangkok, San Juan, Mexico
City, Athens, and Philadelphia.
Contacts for Tools, Dr. Pim Martens, ICIS, P.O. Box 616, 6200 MD Maastricht, The Netherlands;
Documentation, Tel: 31.43.388.3555; Fax: 31.43.321.1889; e-mail: p.martens@icis.unimaas.nl.
Technical
Assistance
Cost Low cost (price of shipping CD-ROM and documentation).
Page 4-87
MIASMA (Modeling Framework for the Health Impact Assessment of Man-Induced
Atmospheric Changes) (cont.)
References Martens, W.J.M., T.H. Jetten et al. 1995. Climate change and vector-borne diseases: A global
modelling perspective. Global Environmental Change 5(3):195-209.
Martens, W.J.M., T.H. Jetten et al. 1997. Sensitivity of malaria, schistosomiasis, and dengue to
global warming. Climatic Change 35:145-156.
Martens, W.J.M. 1998. Climate change, thermal stress and mortality changes. Soc. Sci. Med.
46(3):331-344.
Martens, W. 1997. Health Impacts of Climate Change and Ozone Depletion: An Eco-
Epidemiological Modelling Approach. Dept. Mathematics. Maastricht, University of
Maastricht.
Page 4-88
Description The global burden of disease attributable to climate change was recently estimated as part of a
comprehensive World Health Organization (WHO) project. The project sought to use
standardized methods to quantify disease burdens attributable to 26 environmental,
occupational, behavioral, and life-style risk factors in 2000 and at selected future times up to
2030. The Environmental Burden of Disease (EBD) tools include guidelines on how to
estimate the approximate magnitude of the health impacts of various environmental factors,
including climate change, at the national or regional level, to help determine priorities for
action.
Appropriate Use An EBD assessment for climate change will indicate which impacts could be greatest and in
which regions, and how much of the climate-attributable disease burden could be avoided by
emissions reduction. It also will guide health-protective strategies.
Scope An EBD assessment is usually conducted on a national or regional scale.
Key Output Comparative risk assessment attempts to answer the following questions: (1) How much
disease is caused by climate change (attributable burden of disease)? (2) How much could be
avoided by making plausible reductions in the exposure (avoidable burden of disease)? The
outputs can be defined by the user, but are usually in DALYs (disability adjusted life years) or
avoided deaths that can be compared between populations and between specific health impacts
of climate change.
Key Input The following are needed to determine the amount of climate-sensitive disease that is
attributable to climate change: (1) the baseline burden of climate-sensitive diseases, (2) the
estimated increase in the risk of disease/disability per unit increase in exposure to climate
change, and (3) the current or estimated future population distribution of exposure. The
avoidable burden of climate-sensitive diseases is estimated by comparing projected burdens
under alternative exposure scenarios. The global assessment used WHO estimates of the
baseline burden of cardiovascular deaths associated with thermal extremes, diarrhea episodes,
cases of malaria, malnutrition, and deaths due to natural disasters.
Ease of Use Requires familiarity with comparative risk assessment methods, disease modeling, and
estimation of DALYs.
Training Required Depends on individual familiarity with comparative risk assessment methods, disease
modeling, and estimation of DALYs.
Training Available Occasional training workshops on EBD methods, by WHO.
Computer Standard PC, GIS, and spreadsheet software; access to outputs of climate prediction models.
Requirements
Documentation Examples of global and regional assessments previously published by the WHO and
Australian National University. Guidelines for comparative risk assessment methods have
been published by WHO, with guidelines for national and regional assessments forthcoming in
early 2004.
The WHO guides on assessing the environmental burden of disease are available at
http://www.who.int/quantifying_ehimpacts/publications/en/9241546204chap1.pdf.
Publications on Environmental burden of disease are available at
http://www.who.int/quantifying_ehimpacts/publications/en/.
Research tools are available at http://www.who.int/research/en/.
Page 4-89
Environmental Burden of Disease Assessment (cont.)
Applications See http://www.who.int/quantifying_ehimpacts/en/..
Contacts for Environmental Burden of Disease Assessment, Occupational and Environmental Health,
Framework, Protection of the Human Environment (PHE), World Health Organization, 20, Avenue Appia,
Documentation, CH-1211 Geneva 27, Switzerland; e-mail: EBDAssessment@WHO.
Technical
Assistance
References WHO. 2003. The World Health Report 2002. World Health Organization, Geneva.
McMichael, A.J. et al. 2003. Climate change. In Global Burden of Disease. C.J. Murray and
A.D. Lopez (eds.). World Health Organization, Geneva.
Page 4-90
Description CIMSiM is a dynamic life-table simulation entomological model that produces mean-value
estimates of various parameters for all cohorts of a single species of Aedes mosquito within a
representative 1 ha area (Focks et al., 1993a and b). For each cohort, depending on the life stage,
CIMSiM maintains information on abundance, age, development with respect to temperature
and size, weight, fecundity, and gonotrophic status. With few exceptions, the various processes
are simulated mechanistically. The accounting is made dynamic by calculating on a daily basis
the number of each cohort that will pass to the next age or stage as a function of a number of
variables and relationships. For example, development times of eggs, larvae, pupae, and
gonotrophic cycle are based on temperature using an enzyme kinetics approach. The bases of
larval weight gain, food depletion, and fasting are differential equations modified to compensate
for the influence of temperature. Fecundity is modeled as a function of pupal size, which in turn
is a function of the recent history of larval abundance, food, temperature and, fasting in the
larval habitat. All survivals are tied to temperature, and, for adults and eggs, saturation deficit as
well; larval survival is also a function of fasting and body fat reserves. Because microclimate is
a key determinant of survival and development for all stages, CIMSiM also contains an
extensive database of daily weather information.
DENSiM (Focks et al., 1995) is essentially the corresponding account of the dynamics of a
human population driven by country- and age-specific birth and death rates. An accounting of
individual serologies is maintained, reflecting infection and birth to seropositive mothers. The
entomological factors passed from CIMSiM are used to create the biting mosquito population.
The survival and emergence values dictate the dynamic size of the vector population within
DENSiM while the gonotrophic development and weight estimates influence the rate at which
these females bite. Temperature and titer of virus in the human influence the extrinsic
incubation period in the mosquito; titer is also seen as influencing the probability of transfer of
virus from human to mosquito. The infection model accounts for the development of virus
within individuals and its passage between the vector and human populations.
Appropriate Use The models can be used to (1) optimize dengue control strategies using multiple control
measures; (2) develop transmission thresholds in terms of Ae. aegypti pupae per person as a
function of temperature and herd immunity; and (3) evaluate the impact of climate change.
Scope The models are site-specific and require local surveys and weather to parameterize them.
Key Output Parameters estimated by DENSiM include demographic, entomologic, serologic, and infection
information on a human age-class and/or time basis.
Key Input A pupal/demographic survey is required to estimate the productivities of the various local
water-holding containers. Daily weather is required — maximum/minimum temperature,
rainfall, and saturation deficit.
Ease of Use The front ends of the models are Windows-based and easy to use. However, because the models
are site-specific, there is a substantial upfront investment in parameterization.
Training Required Usually, 3-4 days of training in the context of a grant where Dana A. Focks is either the PI or a
collaborator with responsibilities for simulation analysis.
Training Available Interested parties should contact Dana A. Focks.
Page 4-91
CIMSiM and DENSiM (Dengue Simulation Model) (cont.)
Computer IBM PC compatible computers are required. Memory 512 MB, processor speed useful, 1 GHz
Requirements rough minimum.
Documentation Documentation for the DOS versions is available from Dana A. Focks.
Applications Use of the models has permitted the development of targeted source reduction/control strategies;
WHO’s TDR is now funding pilot evaluations in 10 countries.
To project the impact of climate change on dengue prevalence in the Caribbean, Mexico, USA
(Texas), and multiple locations in South and Central America, and Asia.
Contacts for Dana A. Focks, Infectious Disease Analysis, P.O. Box 12852, Gainesville, FL 32604 USA; Tel:
Framework, 352.375.3520; Fax: 352.372.1838; e-mail: DAFocks@ID-Analysis.com.
Documentation,
Technical
Assistance
Cost Depends on end user. Many dengue-endemic countries have copies.
References Burke, D., A. Carmichael, D. Focks et al. 2001. Under the Weather: Exploring the Linkages
Between Climate, Ecosystems, Infectious Disease, and Human Health. National Research
Council, National Academy Press, Washington, DC 146 pp.
Ebi, K.L., N.D. Lewis and C. Corvalan. 2006. Climate Variability and Change and Their
Potential Health Effects in Small Island States: Information for Adaptation Planning in the
Health Sector. Environ Health Perspect 114(12):1957-1963.
Focks, D.A., D.H. Haile, E. Daniels, and G.A. Mount. 1993a. Dynamic life table model of a
container-inhabiting mosquito, Aedes aegypti (L.) (Diptera: Culicidae). Analysis of the
literature and model development. J Med Entomol 30:1003-1017.
Focks, D.A., D.H. Haile, E. Daniels, and G.A. Mount. 1993b. Dynamic life table model of a
container-inhabiting mosquito, Aedes aegypti (L.) (Diptera: Culicidae). Simulation Results and
Validation. J Med Entomol 30:1018-1028.
Focks, D.A., E. Daniels, D.H. Haile, and J.E. Keesling. 1995. A simulation model of the
epidemiology of urban dengue fever: Literature analysis, model development, preliminary
validation, and samples of simulation results. Am J Trop Med Hyg 53:489-506.
Focks, D.A., R.J. Brenner, D.D. Chadee, and J. Trosper. 1998. The use of spatial analysis in the
control and risk assessment of vector-borne diseases. Am Entomologist 45:173-183.
Focks, D.A., R.J. Brenner, E. Daniels, and J. Hayes. 2000. Transmission thresholds for dengue
in terms of Aedes aegypti pupae per person with discussion of their utility in source reduction
efforts. Am J Trop Med Hyg 62:11-18.
Focks, D.A. 2003a. A Review of Entomological Sampling Methods and Indicators for Dengue
Vectors. Tropical Disease Research, World Health Organization. Geneva.
Jetten, T.H. and D.A. Focks. 1997. Changes in the distribution of dengue transmission under
climate warming scenarios. Am J Trop Med Hyg 57:285-297.
Page 4-92
UNFCCC Guidelines: Methods of Assessing Human Health Vulnerability and Public
Health Adaptation to Climate Change
Description Provides information on qualitative and quantitative methods of assessing human health
vulnerability and public health adaptation to climate change. Objectives and the steps for
assessing vulnerability and adaptation are described. For a range of health outcomes, methods
are presented for evaluation of evidence that climate change could affect morbidity and
mortality; projection of future impacts; and identification of adaptation strategies, policies, and
measures to reduce current and future negative effects. The health outcomes considered are
morbidity and mortality from heat and heat-waves, air pollution, floods and windstorms, and
food insecurity; vector-borne diseases; water- and food-borne diarrheal diseases; and adverse
health outcomes associated with stratospheric ozone depletion.
Appropriate Use To conduct an assessment of current and future human health vulnerability of specific
populations to climate change and to develop appropriate responses.
Scope National or regional scales.
Key Output Description of the current distribution and burden of climate-sensitive diseases; description of
the adaptation baseline; evaluation of the health implications of the potential impact of climate
change on other sectors; estimates of the future potential health impact of climate change using
scenarios of future climate change, population growth, and other factors; and identification of
additional adaptation measures to reduce current and future vulnerability.
Key Input A basic assessment can be conducted using readily available information and data such as
previous assessments, literature reviews by the IPCC and others, and available region-specific
data. A more comprehensive assessment could include a literature search focused on the goals
of the assessment, some quantitative assessment using available data, some quantification of
effects, and a formal peer review of results. An even more comprehensive assessment could
include a detailed literature review, collecting new data and/or generating new models to
estimate impacts, extensive analysis of quantification and sensitivity, formal uncertainty
analysis, and formal peer review.
Ease of Use Can be used by anyone familiar with epidemiological and risk assessment methods.
Training Required Little.
Training Available In discussion for Central Asia.
Computer Depends on level of assessment, from none to computers with adequate power to run models.
Requirements
Documentation See References below.
Applications Assessment of the potential burden of climate-sensitive diseases and identification of response
options to reduce vulnerability. Still being tested so examples of existing applications are few.
Page 4-93
UNFCCC Guidelines: Methods of Assessing Human Health Vulnerability and Public
Health Adaptation to Climate Change (cont.)
Contacts for Bettina Menne, WHO European Centre for Environment and Health, Via Francesco Crispi,
Framework, 10 I-00187 Rome, Italy; e-mail: bme@who.it.
Documentation, Jacinthe Seguin, Climate Change and Health Office, Health Canada
Technical Ottawa, Ontario, Canada; website: http://hc-sc.gc.ca/cc.
Assistance Sari Kovats, LSHTM, Dept of Public Health and Policy, Keppel St., London WC1E 7HT,
England; e-mail: sari.kovats@lshtm.ac.uk.
Kristie L. Ebi, Exponent, 1800 Diagonal Road, Suite 355, Alexandria, VA 22314, USA;
e-mail: kebi@exponent.com.
Cost First 2000 copies free; additional reprints will have marginal costs.
References WHO. 2003. Methods of Assessing Human Health Vulnerability and Public Health Adaptation
to Climate Change. World Health Organization, Geneva. Available at
http://www.euro.who.int/document/e81923.pdf.
Page 4-94
LymSiM
Description LymSiM simulates the population dynamics of the blacklegged tick, Ixodes scapularis, and the
dynamics of transmission of the Lyme disease agent, Borrelia burgdorferi, among ticks and
vertebrate hosts. LymSiM models the effects of ambient temperature, saturation deficit,
precipitation, habitat type, and host type and density on tick populations. The model accounts
for epidemiological parameters, including host and tick infectivity, transovarial and transstadial
transmission, such that the model realistically simulates the transmission of the Lyme disease
spirochete between vector ticks and vertebrate hosts. The software features a dynamic life table
model of I. scapularis with a weekly time step; rates of development, survival, fecundity, and
host finding are based on weather or other environmental variables and vary with time. The
relationships used were based on the literature and unpublished field studies.
Appropriate Use Optimize control of Lyme disease and its vectors; and climate change impact studies.
Scope The models are site-specific and require local surveys and weather data to parameterize them.
Key Output Seasonal and geographical distributions of the Lyme disease agent and its vectors as a function
of climate.
Key Input Required inputs are (1) proportions of forested, meadow, and ecotone; (2) weekly average
temperature, rainfall total, relative humidity, and saturation deficit; and (3) density of the four to
six types of hosts.
Ease of Use The model is Windows based and is easy to use.
Training Required One or two days.
Training Available Yes; contact Dana A. Focks at DAFocks@ID-Analysis.com.
Computer IBM-compatible, minimal processor/memory required.
Requirements
Documentation Documentation exists for the earlier, DOS version. See Contacts below.
Applications A principal use of LymSiM has been to simulate and optimize the effects of management
technologies on populations of tick vector, I. scapularis, and B. burgdorferi in eastern North
America. The model was used to evaluate area-wide acaricide treatments, acaricide self-
treatment of white-footed mice and white-tailed deer, vegetation reduction, and white-tailed
deer density reduction. Simulations demonstrated that area-wide acaricide, vegetation reduction,
or a combination of these technologies would be useful for short-term seasonal management of
ticks and disease in small recreational or residential sites. Moreover, acaricide self-treatment of
deer appears to be the most cost-effective technology for use in long-term management
programs in large areas. Simulation results also suggested that deer density reduction should be
considered as a management strategy component. Finally, the model was used to develop
integrated management strategies for operational tick and tick-borne disease control programs.
Based on the previous studies, the U.S. Centers for Disease Control and Prevention used
LymSiM to evaluate various Lyme disease control techniques as a function of various degrees
of compliance by the public involved in anti-tick measures. This assessment comparing the
effectiveness of alternative community-based prevention strategies illuminates the limitations
and distributive effects of interventions and helped clarify the actual available prevention
options for community residents.
Page 4-95
LymSiM (cont.)
Contacts for Dana A. Focks, Infectious Disease Analysis, P.O. Box 12852, Gainesville, FL 32604 USA;
Framework, Tel: 352.375.3520; Fax: 352.372.1838; e-mail: DAFocks@ID-Analysis.com.
Documentation,
Technical
Assistance
Cost A function of user and application.
References Hayes, E.B., G.O. Maupin, G.A. Mount, and J. Piesman. 1999. Assessing the prevention
effectiveness of local Lyme disease control. J Public Health Manag Pract 5(3):84-92.
Mount, G.A., D.G. Haile, and E. Daniels. 1997. Simulation of management strategies for the
blacklegged tick (Acari: Ixodidae) and the Lyme disease spirochete, Borrelia burgdorferi. J
Med Entomol 34(6):672-663.
Page 4-96
Mapping Malaria Risk in Africa (MARA) Low-end Information Tool (LITe)
Description MARA is a biological model of Falciparum malaria transmission that sets decision rules which
govern how minimum and mean temperature constrain the development of the parasite and the
vector and how precipitation affects survival and breeding. MARA determined the decision
rules by reviewing laboratory and field studies throughout Sub-Saharan Africa and looking at
current malaria distribution maps. This biological model approximates the current boundaries of
malaria distribution across the continent quite well. The model uses three variables to determine
any geographic location’s climatic suitability: mean monthly temperature, winter minimum
temperature, and total cumulative monthly precipitation. An important distinction between this
model and others is that the MARA decision rules were developed using fuzzy logic to resolve
the uncertainty in defining distinct boundaries dividing malarious from nonmalarious regions.
The MARA/ARMA decision rules stipulate that both temperature and precipitation have to be
favorable at the same time of the year to allow transmission, and suitable conditions have to
continue long enough for the transmission cycle to be completed. Five months were considered
a sufficient length of time for conditions to be suitable for stable transmission.
MARA LITe is a stand-alone query system of the MARA database. MARA LITe converts the
MARA relational database (29 separate tables) into a flat structure.
Appropriate Use MARA LITe can be used to create a baseline against which future increases or decreases in
malaria can be quantified. These baselines can be used in conjunction with climate change
scenarios to project possible populations at risk and future prevalence of Falciparum malaria for
a given region.
Scope MARA has not been validated outside of Sub-Saharan Africa.
Key Output Calculations of populations at risk and graphic display of regions showing areas with potential
Falciparum malaria transmission.
Key Input Specified regions.
Ease of Use Relatively easy to use.
Training Available Comprehensive online help files exist for all aspects of the tool.
Computer MARA is implemented in GIS format.
Requirements
Documentation MARA LITe and resources are available at http://www.mara.org.za/lite/download.htm.
Applications See References (below) for examples of applications.
Contacts for See http://www.mara.org.za/.
Framework,
Documentation,
Technical
Assistance
Page 4-97
Mapping Malaria Risk in Africa (MARA) Low-end Information Tool (LITe) (cont.)
Cost MARA LITe available in CD-ROM.
References See http://www.mara.org.za/ for references.
Craig M.H., R.W. Snow, and D. le Sueur. 1999. A climate-based distribution model of malaria
transmission in sub-Saharan Africa. Parasitology Today 15:105-111.
Snow R.W., M. Craig, U. Deichmann, and K. Marsh. 1999. Estimating mortality, morbidity,
and disability due to malaria among Africa’s non-pregnant population. Bull. WHO 77:624-640.
Hartman, J., K.L. Ebi, J.K. McConnell, N. Chan, and J. Weyant. 2002. Climate suitability for
stable malaria transmission in Zimbabwe under different climate change scenarios. Global
Change and Human Health 3:2-14.
Kleinschmidt, I., J. Omumbo, O. Briet, N. van de Giesen, N. Sogoba, N.K. Mensa, P.
Windmeijer, M. Moussa, and T. Teuscher. 2001. An empirical malaria distribution map for
West Africa. Trop Med Int Health 6:779-786.
Gemperli A., P. Vounatsou, I. Kleinschmidt, M. Bagayoko, C. Lengeler, and T. Smith. 2004.
Spatial patterns of infant mortality in Mali: The effect of malaria endemicity. Am J Epidemiol
159:64-72.
MARA/ARMA. 1998. Towards an atlas of malaria risk in Africa. Durban, South Africa.
Page 4-98
4.5 Terrestrial Vegetation Sector Tools
The terrestrial vegetation models presented in this compendium (listed in Table 4.5) represent a
broad sample of the sorts of models that might be useful in considering the impacts of climate
change as well as the potential for adaptation. Some of the models are global in scale (e.g., IBIS,
IMAGE, and MC1, among others) while some are regional in their focus (e.g., Medrush). Some
take a process based approach (e.g., LPJ, CASA, TEM, and CENTURY) while models such as
AEZ rely on assessing the suitability of vegetation growth according to a number of productivity
parameters. While most models allow for the investigation of a number of environmental
parameters, models such as IMAGE were developed explicitly with climate change in question.
Table 4.5. Tools covered in terrestrial vegetation sector

LPJ (Lund-Postdam-Jena Model)
CENTURY
MC1
Page 4-99
LPJ (Lund-Postdam-Jena) Model
Description The LPJ model combines process-based, large-scale representations of terrestrial vegetation
dynamics and land-atmosphere carbon and water exchanges in a modular framework. Features
include feedback through canopy conductance between photosynthesis and transpiration, and
interactive coupling between these “fast” processes and other ecosystem processes, including
resource competition, tissue turnover, population dynamics, soil organic matter and litter
dynamics, and fire disturbance.
Appropriate Use Photosynthesis, evapotranspiration, and soil-water dynamics are modeled on a daily time step,
and vegetation structure and PFT population densities are updated annually.
Scope Global at 0.5° latitude and longitude resolution.
Key Output Vegetation structure, biomass carbon.
Key Input Latitude, longitude, climate, soil texture, CO2.
Ease of Use Expert ecosystem vegetation scientist.
Training Available Training occurs for young scientists developing masters or Ph.D. theses on the basis of LPJ.
Computer Linux cluster.
Requirements
Documentation http://www.pik-potsdam.de/lpj/lpj_researchvt1.html#furtherinfo.
Applications Being applied in many different contexts, LPJ has been able to show multiple aspects of
biospheric vulnerability to climate and land use change, as well as the feedbacks that will
likely arise from broad-scale alteration of the land surface.
Contacts for Dr. I. Colin Prentice, Max Planck Institute for Biogeochemistry, Jena, Germany;
Framework, Tel: +49.3641.643.774; Fax: +49.3641.643.775; e-mail: colin.prentice@bgc-jena.mpg.de.
Documentation,
Technical
Assistance
References Bondeau A., P.C. Smith, S. Zaehle, S. Schaphoff, W. Lucht, W. Cramer, D. Gerten, H. Lotze-
Campen, C. Müller, M. Reichstein and B. Smith. 2007. Modelling the role of agriculture for
the 20th century global terrestrial carbon balance. Global Change Biology 13(3):679-706.
Cramer, W. and 16 others. 2001. Global response of terrestrial ecosystem structure and
function to CO2 and climate change: Results from six dynamic global vegetation models.
Global Change Biology 7:357-373.
Prentice, I.C., M. Heimann, and S. Sitch. 2000. The carbon balance of the terrestrial biosphere:
Ecosystem models and atmospheric observations. Ecological Applications 10:1553-1573.
Sitch, S., B. Smith, I.C. Prentice, A. Arneth, A. Bondeau, W. Cramer, J. Kaplan, S. Levis, W.
Lucht, M. Sykes, K. Thonicke, and S. Venevski. 2003. Evaluation of ecosystem dynamics,
plant geography and terrestrial carbon cycling in the LPJ Dynamic Vegetation Model. Global
Change Biology 9:161-185.
Page 4-100
Description IBIS performs integrated assessments of water balance, carbon balance, and vegetation
structure on both global and regional scales based on an integrated modeling approach that
explicitly represents competition between plant functional types (competition for light and
water) and characterizes their responses to global change drivers (land use changes, climate
variability and change, atmospheric CO2).
IBIS is designed around a hierarchical conceptual framework, and includes several submodels
(or “modules”) that are organized with respect to their characteristic temporal scale: land
surface processes (energy, water, carbon and momentum balance); soil biogoechemistry
(carbon and nitrogen cycling from plant through soil); vegetation dynamics (plant competition
for light, water, and eventually nutrients); vegetation phenology (based on a growing degree
day approach); and atmospheric coupling (IBIS is now directly coupled to GENESIS and
CCM3 GCMs).
Appropriate Use IBIS represents a wide range of ecosystem and land surface processes in a single, physically
consistent framework. In this way, IBIS can simulate the dynamic behavior of land surface and
ecosystem processes, and their consequences for vegetation composition and structure.
Scope Global; spatial: 0.5°, 1.0°, 2.0° and 4.0°; temporal: hourly.
Key Output GPP, above and belowground NPP, NEP, fine root and heterotrophic respiration, nitrogen
mineralization, latent, sensible heat, aet, evaporation, transpiration, snow temperature,
extension and depth.
Carbon and nitrogen: (a) vegetation: fine roots, leaves, and wood for upper canopy (trees) and
fine roots and leaves for lower canopy (shrubs and grasses); (b) litter: above and belowground
(fine root) separated in 3 distinct pools (decomposable, structural and resistant); (c) soil
organic matter: microbial biomass, protected and unprotected “slow” C pools, and passive C
pool.
Key Input Climatic, site, vegetation, soils and resolution (e.g., daily, monthly).
Ease of Use Expert ecosystem vegetation scientist.
Computer High performance cluster.
Requirements
Documentation http://www.sage.wisc.edu/download/IBIS/ibis.html and
http://gaim.unh.edu/Structure/Intercomparison/EMDI/models/ibis.html.
Applications Global climate impacts.
Contacts for Jonathan Andrew Foley, Center for Sustainability and the Global Environment (SAGE),
Framework, Institute for Environmental Studies, University of Wisconsin, 1225 West Dayton Street,
Documentation, Madison, Wisconsin 53706 USA; Tel: 608.265.9119; Fax: 608.265.4113;
Technical e-mail: jfoley@facstaff.wisc.edu.
Assistance
Cost Not provided.
Page 4-101
IBIS (Integrated BIosphere Simulator) (cont.)
References Foley, J.A., I.C. Prentice, N. Ramunkutty, S. Levis, D. Pollard, S. Sitch, and A. Haxeltine.
1996. An integrated biosphere model of land surface processes, terrestrial carbon balance and
vegetation dynamics. Global Biogeochemical Cycles 10:603-628.
Delire, C. and J.A. Foley. 1999. Evaluating the performance of a land surface/ecosystem
model with biophysical measurements from contrasting environments. Journal of Geophysical
Research (Atmospheres) 104(D14):16:895-16,909.
Kucharik, C.J., J.A. Foley, C. Delire, V.A. Fisher, M.T. Coe, J. Lenters, C. Young-Molling, N.
Ramankutty, J.M. Norman, and S.T. Gower. 2000. Testing the performance of a dynamic
global ecosystem model: Water balance, carbon balance and vegetation structure. Global
Biogeochemical Cycles 14(3):795-825.
Wang, G., E.A.B. Eltahir, J.A. Foley, D. Pollard and S. Levis. 2004. Decadal variability of
rainfall in the Sahel: results from the coupled GENESIS-IBIS atmosphere-biosphere model.
Climate Dynamics 22(6-7):625-637.
Page 4-102
Description Landscape-scale model of vegetation structure and productivity, hydrology and soil erosion.
Simulation of structure, productivity, and water relations of Mediterranean vegetation using a
mechanistic (process-based) approach.
Appropriate Use Applied to simulating the effects of recent historical changes in climate and CO2 in evergreen
sclerophyllous shrubland.
Scope Regional applications.
Key Output Vegetation productivity, vegetation composition, soil erosion, and hydrology.
Key Input Climatic, atmosphere CO2, and soil texture data.
Ease of Use Ecosystem-vegetation community expertise needed.
Training Available Not indicated.
Computer PC-based stand-alone.
Requirements
Documentation None identified.
Applications Regional.
Contacts for Professor Ian Woodward, Centre for Terrestrial Carbon Dynamics (CTCD), University of
Framework, Sheffield, Dept. of Animal and Plant Sci., Alfred Denny Building, Western Bank, Sheffield
Documentation, S10 2TN, United Kingdom.
Technical
Assistance
Cost Not indicated.
References Osborne, C.P., P.L. Mitchell, J.E. Sheehy, and F.I. Woodward. 2000. Modelling the recent
historical impacts of atmospheric CO2 and climate change on Mediterranean vegetation.
Global Change Biology 6:445-458.
Page 4-103
CENTURY
Description The CENTURY version 5 agroecosystem model is the latest version of the soil organic model
developed by Parton et al. (1987). This model simulates C, N, P, and S dynamics through an
annual cycle over time scales of centuries and millennia. The producer submodel may be a
grassland/crop, forest or savanna system, with the flexibility of specifying potential primary
production curves representing the site-specific plant community. CENTURY was especially
developed to deal with a wide range of cropping system rotations and tillage practices for
system analysis of the effects of management and global change on productivity and
sustainability of agroecosystems. Note CENTURY is also described under agriculture.
Appropriate Use To study the impact of climate change on net primary production (crops, pastures, forests) as
well as carbon and nutrient dynamics (including carbon sequestration), and to explore adaptive
agricultural and natural resource management options (tillage, fertilizer, different species and
sequences, etc.).
Scope Site-specific but has been used at watershed, drainage basin, and regional scales using GIS.
Key Output Changes in soil carbon and nutrient balances, as well as in crop, pasture and forest production,
for different climate change scenarios.
Key Input Monthly average maximum and minimum air temperature; monthly precipitation; soil texture;
plant nitrogen; phosphorus and sulfur content; lignin content of plant material; atmospheric
and soil nitrogen inputs; initial soil carbon; nitrogen (phosphorus and sulfur optional).
Ease of Use For trained agronomists and ecologists. Requires advanced knowledge of soil and plant growth
processes.
Training Required CENTURY basic training requires at least 1-2 weeks to acquire minimum skills to conduct
simple simulations.
Training Available Training is offered at NREL, Colorado State University (see Contacts below).
Computer PC-based stand alone version, Linux cluster for regional simulations.
Requirements
Documentation http://www.nrel.colostate.edu/projects/century5/.
http://www.nrel.colostate.edu/projects/century5/reference/index.htm.
Applications CENTURY has been used in the Loch Vale Watershed Project, a long-term research program
designed to assess the effect of global climate change on the Front Range of the Colorado
Rockies. Specifically, CENTURY was used to assess the abiotic and biotic controls on forest
distribution and productivity as a basis for assessing potential vegetation change for projected
climate scenarios.
Contacts for Dr William Parton, NREL at Colorado State University, 1499 Campus Delivery Fort Collins,
Framework, CO 80523-1499, USA; Tel: 970.491.1987; e-mail: billp@nrel.colostate.edu.
Documentation, Cindy Keough, Natural Resource Ecology Laboratory, Colorado State University, Fort
Technical Collins, CO 80523-1499 USA; Tel: 970.491.2195; Fax: 970.491.1965;
Assistance e-mail: cindyk@nrel.colostate.edu.
Page 4-104
CENTURY (cont.)
References See http://nrel.colostate.edu/projects/century5/reference/html/bibliography.htm#parton1987
for more references.
Hall, D.O., J.M.O. Scurlock, D.S. Ojima, and W.J. Parton. 2000. Grasslands and the global
carbon cycle: Modelling the effects of climate change. In The Carbon Cycle. T.M.L. Wigley
and D.S. Schimel (eds.). Cambridge University Press, Cambridge, UK, pp. 102-114.
Kelly, R.H., W.J. Parton, G.J. Crocker, P.R. Grace, J. Klír, M. Körschens, P.R. Poulton, and
D.D. Richter. 1997. Simulating trends in soil organic carbon in long-term experiments using
the Century model. Geoderma 1258.
Melillo, J.M., J. Borchers, J. Chaney, H. Fisher, S. Fox, A. Haxeltine, A. Janetos, D.W.
Kicklighter, T.G.F. Kittel, A.D. McGuire, R. McKeown, R. Neilson, R. Nemani, D.S. Ojima,
T. Painter, Y. Pan, W.J. Parton, L. Pierce, L. Pitelka, C. Prentice, B. Rizzo, N.A. Rosenbloom,
S. Running, D.S. Schimel, S. Sitch, T. Smith, and I. Woodward. 1995. Vegetation/ecosystem
modeling and analysis project: comparing biogeography and biogeochemistry models in a
continental-scale study of terrestrial ecosystem responses to climate change and CO2 doubling.
Global Biogeochemical Cycles 9:407-437.
Ojima, D.S., W.J. Parton, D.S. Schimel, T.G.F. Kittel, and J.M.O. Scurlock. 1993. Modeling
the effects of climatic and CO2 changes on grassland storage of soil C. Water, Air, and Soil
Pollution 70:643-657.
Parton, W.J., D.S. Schimel, C.V. Cole and D.S. Ojima. 1987. Analysis of factors controlling
soil organic matter levels in Great Plains grasslands. Soil Science Society of America Journal
51:1173-1179.
Parton, W.J., D.S. Schimel, D.S. Ojima, and C.V. Cole. 1994. A general model for soil organic
matter dynamics: sensitivity to litter chemistry, texture and management. Pages 147-167 in
Bryant, R. B. and R.W. Arnold (eds.). Quantitative modeling of soil forming processes. SSSA
Spec. Publ. 39. ASA, CSSA and SSA, Madison, WI, USA.
Page 4-105
MC1
Description MC1 consists of three linked modules simulating biogeography, biogeochemistry, and fire
disturbance. The main functions of the biogeography module are to (1) predict the composition
of deciduous/evergreen tree and C3/C4 grass lifeform mixtures, and (2) classify the predicted
biomass from the biogeochemistry module into different vegetation classes.
The biogeochemistry module simulates monthly carbon and nutrient dynamics for a given
ecosystem. Above- and below-ground processes are modeled in detail, and include plant
production, soil organic matter decomposition, and water and nutrient cycling.
Parameterization of this module is based on the lifeform composition of the ecosystems, which
is updated annually by the biogeography module.
Appropriate Use Climate change effects on vegetation changes.
Scope Regional to global.
Key Output Vegetation structure, fire events, plant productivity, vegetation carbon, soil carbon and
nitrogen, evapotranspiration.
Key Input Monthly precipitation, mean monthly average minimum and maximum temperatures, vapor
pressure, wind speed, solar radiation, soil depth, soil texture, bulk density.
Ease of Use Ecosystem and vegetation science expertise.
Computer Linux cluster or multiple processor.
Requirements
Documentation http://www.fsl.orst.edu/dgvm/mcgtr508.pdf.
Applications Regional to global applications.
Contacts for Ronald P. Neilson, BioClimatologist, USDA Forest Service, Pacific Northwest Research
Framework, Station, Corvallis Forestry Sciences Laboratory, 3200 SW Jefferson Way, Corvallis, OR
Documentation, 97331 USA; Tel: 541.750.7303; e-mail: rneilson@fs.fed.gov.
Technical Assistance
Cost Depends on application.
References Bachelet, D., J.M. Lenihan, C. Daly, and R.P. Neilson. 2000. Climate, fire and grazing effects
at Wind Cave National Park, SD. Ecological Modelling 134(2-3):229-244.
Bachelet, D., J.M. Lenihan, C. Daly, R.P. Neilson, D.S. Ojima, and W.J. Parton. 2001. MC1.
A dynamic vegetation model for estimating the distribution of vegetation and associated
ecosystem fluxes of carbon, nutrients and water. Technical Documentation Version 1.0.
General Technical Report PNW-GTR-508. Corvallis, OR. USDA Forest Service, Pacific
Northwest Research Station.
Daly, C., D. Bachelet, J.M. Lenihan, R.P. Neilson, W.J. Parton, and D. Ojima. 2000. Dynamic
simulation of tree-grass interactions for global change studies. Ecological Applications
10(2):449-469.
Lenihan, J.M., C. Daly, D. Bachelet, and R.P. Neilson. 1998. Simulating broad-scale fire
severity in a dynamic global vegetation model. Northwest Science 72:91-103.
Page 4-106
Description IMAGE was developed at RIVM in the Netherlands (Alcamo, 1994). It takes a global
approach with the entire earth system as the subject of investigation. Its main use is scenario
analysis of the issue of anthropogenic climate change due to the greenhouse effect. It is
Integrated because it is designed to simulate the dynamics and interconnections between three
major subsystems of the globe, namely, climate, biosphere, and society.
Appropriate Use Land use and climate change effects on land productivity.
Scope Global and national level responses.
Key Output Cumulative greenhouse gas emissions, the resulting atmospheric concentrations, global
warming, sea level rise, changing patterns of land use and cover, agricultural impacts,
ecosystem risks, and also the costs of policies for emissions reduction or control.
Key Input Climate, soil, land use and cover, regional demands for cropland and rangeland and fuelwood
demand, and “local” potential for land.
Ease of Use Expertise of ecosystem and land use science.
Computer PC-based.
Requirements
Documentation http://sedac.ciesin.columbia.edu/mva/image-2.0/image-2.0-toc.html
Applications Regional and global use.
Contacts for Joseph Alcamo, Environmental Systems Engineering, Executive Director, Center for
Framework, Environmental Systems Research, Kurt-Wolters-Straße 3, Room 2116, 34109 Kassel,
Documentation, Germany; Tel: +49.561.804.3898; Fax: +49.561.804.3176; e-mail: alcamo@usf.uni-kassel.de.
Technical
Assistance
Cost Not specified.
References Alcamo, Joseph (ed.). 1994. IMAGE 2.0: Integrated Modeling of Global Climate Change.
Dordrecht, The Netherlands: Kluwer Academic Publishers.
Page 4-107
Description The Food and Agriculture Organization of the United Nations (FAO) with the collaboration of
the International Institute for Applied Systems Analysis (IIASA), has developed this system,
which enables rational land-use planning on the basis of an inventory of land resources and
evaluation of biophysical limitations and potentials.
It is anticipated that the AEZ process will be crucial in identifying agricultural and natural
resource baselines, and in monitoring how these baselines are being altered. The AEZ
methodology also provides a means of identifying how natural resources and agricultural
production is likely to be perturbed under future climate scenarios and in identifying suitable
crops and locations under future climate scenarios.
Recent availability of digital global databases of climatic parameters, topography, soil and
terrain, vegetation, and population distribution has called for revisions and improvements in
calculation procedures and in turn has allowed for expanding assessments of AEZ crop
suitability and land productivity potentials to temperate and boreal environments.
Appropriate Use Climate change analysis of crop production. It is recommended that users access model
results.
Scope AEZ methodology and supporting software packages can be applied at global, regional,
national and sub-national levels.
Key Output Maximum potential and agronomically attainable crop yields for basic land resources units
(usually grid-cells in the recent digital databases).
Key Input Climate, topography and soil characteristics, and is to a large extent determined by
demographic, socioeconomic, cultural, and political factors, such as population density, land
tenure, markets, institutions, and agricultural policies.
Ease of Use Expertise in crop systems.
Computer Web-based PC tools.
Requirements
Documentation http://www.iiasa.ac.at/Research/LUC/GAEZ/index.htm?sb = 6.
Applications Climate change assessments of agricultural production.
Contacts for Günther Fischer, International Institute for Applied Systems Analysis (IIASA), A-2361
Framework, Laxenburg, Austria; Tel: +43.2236.807.0; Fax: +43.2236.71.313; e-mail: fisher@iiasa.ac.at.
Documentation,
Technical
Assistance
Cost Depends on application.
Page 4-108
AEZ (Agro-ecological Zones) Methodology (cont.)
References Batjes, N.H., G. Fischer, F.O. Nachtergaele, V.S. Stolbovoi, and H.T. van Velthuizen. 1997.
Soil Data Derived from WISE for Use in Global and Regional AEZ Studies. FAO/IIASA/
ISRIC Report IR-97-025. International Institute for Applied Systems Analysis, Laxenburg,
Austria.
Fischer, G. and H.T. van Velthuizen. 1996. Climate Change and Global Agricultural Potential
Project: A Case Study of Kenya. International Institute for Applied Systems Analysis,
Laxenburg, Austria, 96 pp.
Fischer, G. and H.T. van Velthuizen. 1999. Agro-ecological zones of China, the former Soviet
Union and Mongolia. International Institute for Applied Systems Analysis, Laxenburg,
Austria.
Fischer, G and G.K. Heilig. 1997. Population momentum and the demand on land and water
resources. Phil. Trans. R. Soc. Land. B 352:869-889.
Fischer, G., S. Prieler and H. van Velthuizen. 2005. Biomass potentials of miscanthus, willow
and poplar: results and policy implications for Eastern Europe, Northern and Central Asia.
Biomass and Bioenergy 28(2):119-132.
Page 4-109
Description Calculation of monthly terrestrial NPP is based on the concept of light-use efficiency,
modified by temperature and moisture stress scalars. Soil carbon cycling and Rh flux
components of the model are based on a compartmental pool structure, with first-order
equations to simulate loss of CO2 from decomposing plant residue and surface soil organic
matter (SOM) pools. Model outputs include the response of net CO2 exchange and other
major trace gases in terrestrial ecosystems to interannual climate variability (1983 to 1988) in
a transient simulation mode.
Appropriate Use Climate change analysis of ecosystem productivity.
Scope Global to regional.
Key Output Global gridded estimates of primary production, above and below ground biomass, leaf area
index (LAI), and trace gas fluxes.
Key Input Air surface temperature and precipitation are used together with long-term (30-year) mean
values, and surface solar irradiance measurements.
Ease of Use Expertise of ecosystem and biogeochemistry science.
Computer High end workstation.
Requirements
Documentation http://geo.arc.nasa.gov/sge/casa/index4.html.
Applications Estimate of current ecosystem productivity.
Contacts for Christopher Potter, Ecosystem Science and Technology, NASA Ames Research Center,
Framework, Moffett Field, CA USA; Tel: 650.604.6164; Fax: 650.604.4680;
Documentation, e-mail: cpotter@gaia.arc.nasa.gov.
Technical
Assistance
Cost Not specified.
References See http://geo.arc.nasa.gov/sge/casa/pubs.html for full publication list.
Page 4-110
Description The TEM is a process-based ecosystem model that describes carbon and nitrogen dynamics of
plants and soils for terrestrial ecosystems of the globe. The TEM uses spatially referenced
information on climate, elevation, soils, vegetation, and water availability as well as soil- and
vegetation-specific parameters to make monthly estimates of important carbon and nitrogen
fluxes and pool sizes of terrestrial ecosystems. The TEM operates on a monthly time step and
at a 0.5° latitude/longitude spatial resolution.
Appropriate Use Regional to global simulation of climate effects on ecosystem dynamics.
Scope Regional to global.
Key Output GPP, NPP, evapotranspiration, soil carbon and nitrogen, vegetation carbon and nitrogen.
Key Input Vegetation, soil texture, elevation, solar radiation, precipitation, air temperature.
Ease of Use Expertise in ecosystem science and biogeochemistry.
Computer High-end workstation.
Requirements
Documentation http://www.mbl.edu/eco42/.
Applications Examined the time-dependent responses of terrestrial carbon storage and the net carbon
exchange with the atmosphere as influenced by historical climate CO2, land use and soil
thermal regime.
Contacts for Jerry M. Melillo, A. David McGuire, David W. Kicklighter, Yude Pan, Hanqin Tian, The
Framework, Ecosystems Center, Marine Biological Laboratory, Woods Hole, MA 02543 USA;
Documentation, e-mails: jmelillo@lupine.mbl.edu, ffadm@aurora.alaska.edu, dkick@mbl.edu.
Technical
Assistance
Cost Not specified.
References See http://www.mbl.edu/eco42/tempub.html for additional references.
McGuire, A.D., C. Wirth, M. Apps, J. Beringer, J. Clein, H. Epstein, D.W. Kicklighter, J.
Bhatii, F.S. Chapin III, B. de Groot, D. Efremov, W. Eugster, M. Fukuda, T. Gower, L.
Hinzman, B. Huntley, G.J. Jia, E. Kasischke, J.M. Melillo, V. Romanovsky, A. Shvidenko, E.
Vaganov, and D. Walker. 2002. Environmental variation, vegetation distribution, carbon
dynamics, and water/energy exchange in high latitudes. Journal of Vegetation Science 13:301-
314.
Pan, Y., A.D. McGuire, J.M. Melillo, D.W. Kicklighter, S. Sitch, and I.C. Prentice. 2002. A
biogeochemistry-based dynamic vegetation model and its application along a moisture
gradient in the continental United States. Journal of Vegetation Science 13:369-382.
Tian, H., J.M. Melillo, D.W. Kicklighter, S. Pan, J. Liu, A.D. McGuire, and B. Moore III.
2003. Regional carbon dynamics in monsoon Asia and its implications for the global carbon
cycle. Global and Planetary Change 37:201-217.
Page 4-111

Compendium On Methods and Tools To Evaluate Impacts Of, and Vulnerability and Adaptation To, Climate Change

Uploaded by

Copyright:

Available Formats

Compendium On Methods and Tools To Evaluate Impacts Of, and Vulnerability and Adaptation To, Climate Change

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Compendium On Methods and Tools To Evaluate Impacts Of, and Vulnerability and Adaptation To, Climate Change

Uploaded by

Copyright:

Available Formats

Compendium on methods and

tools to evaluate impacts of, and

with the services of:

SCOPE Report on impact Assessments (Kates et al., 1985)

1.1 Focus and Scope of the Compendium

Tables include relevant topics from the following list:

Contacts for framework/tools, documentation, technical assistance. Provides

Notes on using the compendium

Table 1.1. Organization of frameworks and tools in the compendium

Chapter 2: Complete Frameworks and Supporting Toolkits

CLOUD (Climate Outlooks and Agent-based Simulation of Adaptation in Africa)

CoastClim of Simulator of Climate Change Risks and Adaptation Initiatives (SimClim)

Tool. A means or instrument by which a specific task is accomplished. Examples include:

Table 2.1. Complete frameworks and supporting toolkits

Contacts for Tim Carter; e-mail: tim.carter@vyh.fi.

3.1 Development and Application of Scenarios

UK Met Office: http://www.metoffice.gov.uk/

Cost The software is free. Send request to Larry J. Williams (ljwillia@epri.com)

Developing Socioeconomic Scenarios: For Use in Vulnerability and Adaptation Assessments

Table 3.2. Decision tools

Table 3.3 Stakeholder approaches

MPPACC is not a tool to assess climate change impacts or vulnerability.

Table 3.4. Other multisector tools

Step 1 – Context established

The tools in Section 2 cover seven types of activities in CBDRM:

Step 1 – Priority vulnerable communities identified

The chapter on fieldwork includes detailed descriptions of various types of information

Climate watch format:

(1) Establishment of national climate watch system

Hardcopies available at: ECLAC Publications, Casilla 179D, Santiago, Chile;

The guide is divided into four sections:

The guide provides the following information:

4.1 Agricultural Sector Tools

Training Required No.

Training Required No.

Output of the training:

The main sources for data are:

GAMS documentation is available at http://www.gams.com/docs/document.htm.

The current version of OSWRM is freely available.

The evolution of assessment techniques is marked by:

Table 4.4. Tools covered in human health sector

Table 4.5. Tools covered in terrestrial vegetation sector

You might also like