Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 121 views

    Scalar Antenna

    Uploaded by

    jojo 9000
    The document provides instructions for creating a harmonic emitter to become a node on the Harmonic Grid. It involves downloading an audio file, making a scalar cable with an audio jack and alligator clip, and creating a Tesla caduceus coil antenna by wrapping copper wire around a wooden dowel in a specific pattern. Playing the audio file through the scalar cable attached to the coil allows one to broadcast tones and act as a node, with recommendations to do it for at least half an hour per day.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Scalar Antenna

    Uploaded by

    jojo 9000
    121 views4 pages
    The document provides instructions for creating a harmonic emitter to become a node on the Harmonic Grid. It involves downloading an audio file, making a scalar cable with an audio jack and alligator clip, and creating a Tesla caduceus coil antenna by wrapping copper wire around a wooden dowel in a specific pattern. Playing the audio file through the scalar cable attached to the coil allows one to broadcast tones and act as a node, with recommendations to do it for at least half an hour per day.

    Original Description:

    gj

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for creating a harmonic emitter to become a node on the Harmonic Grid. It involves downloading an audio file, making a scalar cable with an audio jack and alligator clip, and creating a Tesla caduceus coil antenna by wrapping copper wire around a wooden dowel in a specific pattern. Playing the audio file through the scalar cable attached to the coil allows one to broadcast tones and act as a node, with recommendations to do it for at least half an hour per day.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    121 views4 pages

    Scalar Antenna

    Uploaded by

    jojo 9000
    The document provides instructions for creating a harmonic emitter to become a node on the Harmonic Grid. It involves downloading an audio file, making a scalar cable with an audio jack and alligator clip, and creating a Tesla caduceus coil antenna by wrapping copper wire around a wooden dowel in a specific pattern. Playing the audio file through the scalar cable attached to the coil allows one to broadcast tones and act as a node, with recommendations to do it for at least half an hour per day.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    HOW

    TO CREATE A HARMONIC EMITTER — 



    Becoming a Node on the Harmonic Grid

    Step 1: Download the 9SeedAll.mp3 file to your cell phone or computer or iPad/Tablet
    device … to get that file from your browser …
    (click here—>) https://s3.amazonaws.com/gwhardin.public/9seedAll.mp3
    note: then click the pause button on the screen and then do “File-Save As”

    Step 2: Create a scalar cable for your music device.

    A. Buy a monoaural audio cable at Radio Shack or on Amazon.com:

    Notice that a monaural audio cable has only 2 sections on


    the plug (not 3 or 4).

    You may buy these cables at amazon.com at https://www.amazon.com/


    3-5mm-Mono-Male-Cable-Plated/dp/B004HZVV34/ref=sr_1_41?

    … or at Radio Schack at https://www.radioshack.com/search?q=4202420

    B. Cut the cable in two (if it’s long enough cut in half so you have two cables to use)

    C. Strip off about 3/4ths of an inch of the outer coating on one end.


    D. Peel back the outside piece of wire surrounding the inner coated wire.

    E. With electric tape, tape the peeled back wire to the main cable.

    F. Take an alligator clip and crimp it to the inner wire making sure the copper wire
    touches the clip.

    You may buy these alligator clips at Radio Shack:


    https://www.radioshack.com/products/radioshack-mini-1-1-4-alligator-clips

    The premise for making this cable came from a YouTube video that shows how to
    create a sound-based scalar system:
    https://www.youtube.com/watch?v=_T8bAxxY_uA

    Here is where you can read the DIY pdf guide:


    https://archive.org/details/TheDiyGuideToBuildingTetrahedralBioelectricResonatorArrays
    Step 3: Create a scalar antenna to which your alligator clip will be attached.

    A. Recommend making a Tesla caduceus coil as the easiest technique.

    Here are other types of Tesla antennae than will work:

    http://www.ascensionmerkaba.com/
    angelic-merkaba.html

    B. Buy a 12 inch wooden dowel at Michael's Crafts or other stores


    http://www.michaels.com/creatology-wood-dowels-0.4375%22/10031027.html#q=wood+dowels&start=6

    C. Draw a straight line on both sides of the dowel exactly on opposite sides of the
    dowel. Then notch the wood at both ends of the straight lines where copper wire will be
    threaded.

    Next draw a start hash 1 in. from the bottom. Then draw 9 small X’s where your copper
    wire will cross as you loop up the dowel. Then finish with another hash 1 in. from the
    last X. Draw this only on the top side of the dowel.

    X X X X X X X X X

    D. Buy thin copper wire to spool around your dowel (around 22-24 gauge).
    http://www.michaels.com/24-gauge-copper-wire-by-ashland/10482465.html#q=copper+wire&start=4
    E. Starting at the bottom, run your copper wire through the notch and then wrap 3
    times around the hash mark going in a right hand turn (clockwise as you look from the
    bottom). Then continue wrapping around the dowel making sure that you cross the X’s
    on the top until you reach the top hash mark. Again wrap 3 times around the hash
    mark and then continue up through the top notch.

    X X X X X X X X X

    F. Now continue wrapping around and once again wrap 3 times around the top hash
    mark, and then continue wrapping around your dowel until you reach the bottom hash
    mark. Wrap around this three times once again, and finish by threading through the
    notch on more time, leaving enough wire coming out of the notch to allow connecting
    to your alligator clip.

    X X X X X X X X X

    G. Next, look on the back side of your dowel to make sure your wires cross on the
    straight line on that side as well. Adjust the wires to make sure they cross the straight
    line, otherwise you are done. Now you can become part of the Harmonic Grid.

    To do so, plug your scalar cable into your music device. Then attach your alligator clip
    to your Tesla caduceus coil. Play your tones and you become a node of the Harmonic
    Grid. It’s up to you how lone you choose to play these tones. I recommend at least a half
    hour a day or more. Be sure to set intent about moving into your harmony with
    yourself, so that your whole self becomes an amplifier of the Harmonic Grid. It is that
    simple, but yet quite powerful as you will discover. If you find your body is changing too
    fast, then reduce the time you spend around the emitter.

    X X X X X X X X X

    Plug into the headphone jack of your music


    device (cell phone, mp3 player, computer or
    iPad/Tablet)

    Step 4: If you wish to also learn how to create Harmonetic®Water with your scalar
    emitter, go to the article at …
    http://s3.amazonaws.com/gwhardin_production/articles/pdfs/000/000/017/original/Article_Harmonetic_Water.pdf?1475247545

    You might also like