74HC75

Quad bistable transparant latch

Rev. 4 — 24 February 2016 Product data sheet

1. General description
The 74HC75 is a quad bistable transparent latch with complementary outputs. Two
latches are simultaneously controlled by one of two active HIGH enable inputs (LE12 and
LE34). When LEnn is HIGH, the data enters the latches and appears at the nQ outputs.
The nQ outputs follow the data inputs (nD) as long as LEnn is HIGH (transparent). The
data on the nD inputs one set-up time prior to the HIGH-to-LOW transition of the LEnn will
be stored in the latches. The latched outputs remain stable as long as the LEnn is LOW.
Inputs include clamp diodes. This enables the use of current limiting resistors to interface
inputs to voltages in excess of VCC.

2. Features and benefits

 Complementary Q and Q outputs
 VCC and GND on the center pins
 Low-power dissipation
 Complies with JEDEC standard no. 7A
 Input levels:
 For 74HC75: CMOS level
 ESD protection:
 HBM EIA/JESD22-A114F exceeds 2000 V
 MM EIA/JESD22-A115-A exceeds 200 V
 Multiple package options
 Specified from 40 C to +80 C and from 40 C to +125 C.

3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74HC75D 40 C to +125 C SO16 plastic small outline package; 16 leads; SOT109-1
body width 3.9 mm
74HC75DB 40 C to +125 C SSOP16 plastic shrink small outline package; 16 leads; SOT338-1
body width 5.3 mm
74HC75PW 40 C to +125 C TSSOP16 plastic thin shrink small outline package; SOT403-1
16 leads; body width 4.4 mm
NXP Semiconductors 74HC75
Quad bistable transparant latch

4. Functional diagram

 &



 '

/(
 
 4 
'  
4

 4
' 
4 
/ &
/

 4 
'  
4 '


 4
'  
4 
/( 

DDE DDE

Fig 1. Logic symbol Fig 2. IEC logic symbol

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 2 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

' 4
 ' 4 

/( 4
 &3  ' ' 4 4

/
/( &3 4

/$7&+
' 4 
 ' 4 

4
&3  ' ' 4 4

/
&3 4

/$7&+
' 4 
 ' 4 

/( 4
 &3  ' ' 4 4

/
/( &3 4

/$7&+
' 4 
 ' 4 

4
&3  ' ' 4 4

/
&3 4

/$7&+
DDE
 DDE

Fig 3. Functional diagram Fig 4. Logic diagram

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 3 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

5. Pinning information

5.1 Pinning

4   4

'   4

'   4

/(   /(

9&&   *1'

'   4

'   4

4   4

DDE

Fig 5. Pin configuration SO16, SSOP16 and TSSOP16

5.2 Pin description

Table 2. Pin description
Symbol Pin Description
1Q, 2Q, 3Q, 4Q 1, 14, 11, 8 complementary latch output
1D, 2D, 3D, 4D 2, 3, 6, 7 data input
LE34 4 latch enable input for latches 3 and 4 (active HIGH)
VCC 5 positive supply voltage
GND 12 ground (0 V)
LE12 13 latch enable input for latches 1 and 2 (active HIGH)
1Q, 2Q, 3Q, 4Q 16, 15, 10, 9 latch output

6. Functional description

6.1 Function table

Table 3. Function table[1]
Operating mode Input Output
LEnn nD nQ nQ
Data enabled H L L H
H H H L
Data latched L X q q

[1] H = HIGH voltage level;

L = LOW voltage level;
q = lower case letters indicate the state of the referenced output one set-up time prior to the HIGH-to-LOW LEnn transition;
X = don’t care.

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 4 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

7. Limiting values
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
VCC supply voltage 0.5 +7.0 V
IIK input clamping current VI < 0.5 V or VI > VCC + 0.5 V [1] - 20 mA
IOK output clamping current VO < 0.5 V or VO > VCC + 0.5 V [1] - 20 mA
IO output current VO = 0.5 V to VCC + 0.5 V - 25 mA
ICC supply current - 50 mA
IGND ground current 50 - mA
Tstg storage temperature 65 +150 C
Ptot total power dissipation Tamb = 40 C to +125 C
SO16 package [2] - 500 mW
(T)SSOP16 package [3] - 500 mW

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] Ptot derates linearly with 8 mW/K above 70 C.
[3] Ptot derates linearly with 5.5 mW/K above 60 C.

8. Recommended operating conditions

Table 5. Recommended operating conditions
Symbol Parameter Conditions Min Typ Max Unit
VCC supply voltage 2.0 5.0 6.0 V
VI input voltage 0 - VCC V
VO output voltage 0 - VCC V
Tamb ambient temperature 40 - +125 C
t/V input transition rise and fall rate VCC = 2.0 V - - 625 ns/V
VCC = 4.5 V - 1.67 139 ns/V
VCC = 6.0 V - - 83 ns/V

9. Static characteristics
Table 6. Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 25 C
VIH HIGH-level input voltage VCC = 2.0 V 1.5 1.2 - V
VCC = 4.5 V 3.15 2.4 - V
VCC = 6.0 V 4.2 3.2 - V
VIL LOW-level input voltage VCC = 2.0 V - 0.8 0.5 V
VCC = 4.5 V - 2.1 1.35 V
VCC = 6.0 V - 2.8 1.8 V

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 5 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

Table 6. Static characteristics …continued

At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
VOH HIGH-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 2.0 V 1.9 2.0 - V
IO = 20 A; VCC = 4.5 V 4.4 4.5 - V
IO = 20 A; VCC = 6.0 V 5.9 6.0 - V
IO = 4 mA; VCC = 4.5 V 3.98 4.32 - V
IO = 5.2 mA; VCC = 6.0 V 5.48 5.81 - V
VOL LOW-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 2.0 V - 0 0.1 V
IO = 20 A; VCC = 4.5 V - 0 0.1 V
IO = 20 A; VCC = 6.0 V - 0 0.1 V
IO = 4 mA; VCC = 4.5 V - 0.15 0.26 V
IO = 5.2 mA; VCC = 6.0 V - 0.16 0.26 V
II input leakage current VI = VCC or GND; VCC = 6.0 V - - 0.1 A
ICC supply current VI = VCC or GND; IO = 0 A; - - 8.0 A
VCC = 6.0 V
CI input capacitance - 3.5 - pF
Tamb = 40 C to +85 C
VIH HIGH-level input voltage VCC = 2.0 V 1.5 - - V
VCC = 4.5 V 3.15 - - V
VCC = 6.0 V 4.2 - - V
VIL LOW-level input voltage VCC = 2.0 V - - 0.5 V
VCC = 4.5 V - - 1.35 V
VCC = 6.0 V - - 1.8 V
VOH HIGH-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 2.0 V 1.9 - - V
IO = 20 A; VCC = 4.5 V 4.4 - - V
IO = 20 A; VCC = 6.0 V 5.9 - - V
IO = 4 mA; VCC = 4.5 V 3.84 - - V
IO = 5.2 mA; VCC = 6.0 V 5.34 - - V
VOL LOW-level output voltage VI = VIH or VIL
IO = 20 A; VCC = 2.0 V - - 0.1 V
IO = 20 A; VCC = 4.5 V - - 0.1 V
IO = 20 A; VCC = 6.0 V - - 0.1 V
IO = 4 mA; VCC = 4.5 V - - 0.33 V
IO = 5.2 mA; VCC = 6.0 V - - 0.33 V
II input leakage current VI = VCC or GND; VCC = 6.0 V - - 1.0 A
ICC supply current VI = VCC or GND; IO = 0 A; - - 80 A
VCC = 6.0 V

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 6 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

Table 6. Static characteristics …continued

At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 40 C to +125 C
VIH HIGH-level input voltage VCC = 2.0 V 1.5 - - V
VCC = 4.5 V 3.15 - - V
VCC = 6.0 V 4.2 - - V
VIL LOW-level input voltage VCC = 2.0 V - - 0.5 V
VCC = 4.5 V - - 1.35 V
VCC = 6.0 V - - 1.8 V
VOH HIGH-level output voltage VI = VIH or VIL -
IO = 20 A; VCC = 2.0 V 1.9 - - V
IO = 20 A; VCC = 4.5 V 4.4 - - V
IO = 20 A; VCC = 6.0 V 5.9 - - V
IO = 4 mA; VCC = 4.5 V 3.7 - - V
IO = 5.2 mA; VCC = 6.0 V 5.2 - - V
VOL LOW-level output voltage VI = VIH or VIL -
IO = 20 A; VCC = 2.0 V - - 0.1 V
IO = 20 A; VCC = 4.5 V - - 0.1 V
IO = 20 A; VCC = 6.0 V - - 0.1 V
IO = 4 mA; VCC = 4.5 V - - 0.4 V
IO = 5.2 mA; VCC = 6.0 V - - 0.4 V
II input leakage current VI = VCC or GND; VCC = 6.0 V - - 1.0 A
ICC supply current VI = VCC or GND; IO = 0 A; - - 160 A
VCC = 6.0 V

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 7 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

10. Dynamic characteristics

Table 7. Dynamic characteristics
GND = 0 V; tr = tf = 6 ns; CL = 50 pF; unless otherwise specified, see Figure 10.
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 25 C
tPHL, tPLH propagation delay see Figure 6
nD to nQ VCC = 2.0 V - 33 110 ns
VCC = 4.5 V - 12 22 ns
VCC = 6.0 V - 10 19 ns
VCC = 5.0 V; CL = 15 pF - 11 - ns
propagation delay see Figure 7
nD to nQ VCC = 2.0 V - 39 120 ns
VCC = 4.5 V - 14 24 ns
VCC = 6.0 V - 11 20 ns
VCC = 5.0 V; CL = 15 pF - 11 - ns
propagation delay see Figure 9
LEnn to nQ VCC = 2.0 V - 33 120 ns
VCC = 4.5 V - 12 24 ns
VCC = 6.0 V - 10 20 ns
VCC = 5.0 V; CL = 15 pF - 11 - ns
propagation delay see Figure 9
LEnn to nQ VCC = 2.0 V - 39 125 ns
VCC = 4.5 V - 14 25 ns
VCC = 6.0 V - 11 21 ns
VCC = 5.0 V; CL = 15 pF - 11 - ns
tTHL, tTLH output transition time see Figure 6 and 7
VCC = 2.0 V - 19 75 ns
VCC = 4.5 V - 7 15 ns
VCC = 6.0 V - 6 13 ns
tW enable pulse width see Figure 9
HIGH VCC = 2.0 V 80 17 - ns
VCC = 4.5 V 16 6 - ns
VCC = 6.0 V 14 5 - ns
tsu set-up time nD to see Figure 8
LEnn VCC = 2.0 V 60 14 - ns
VCC = 4.5 V 12 5 - ns
VCC = 6.0 V 10 4 - ns
th hold time nD to LEnn see Figure 8
VCC = 2.0 V 3 8 - ns
VCC = 4.5 V 3 3 - ns
VCC = 6.0 V 3 2 - ns

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 8 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

Table 7. Dynamic characteristics …continued

GND = 0 V; tr = tf = 6 ns; CL = 50 pF; unless otherwise specified, see Figure 10.
Symbol Parameter Conditions Min Typ Max Unit
CPD power dissipation VI = GND to VCC [1] - 42 - pF
capacitance per latch
Tamb = 40 C to +85 C
tPHL, tPLH propagation delay see Figure 6
nD to nQ VCC = 2.0 V - - 140 ns
VCC = 4.5 V - - 28 ns
VCC = 6.0 V - - 24 ns
propagation delay see Figure 7
nD to nQ VCC = 2.0 V - - 150 ns
VCC = 4.5 V - - 30 ns
VCC = 6.0 V - - 26 ns
propagation delay see Figure 9
LEnn to nQ VCC = 2.0 V - - 150 ns
VCC = 4.5 V - - 30 ns
VCC = 6.0 V - - 26 ns
propagation delay see Figure 9
LEnn to nQ VCC = 2.0 V - - 155 ns
VCC = 4.5 V - - 31 ns
VCC = 6.0 V - - 26 ns
tTHL, tTLH output transition time see Figure 6 and 7
VCC = 2.0 V - - 95 ns
VCC = 4.5 V - - 19 ns
VCC = 6.0 V - - 16 ns
tW enable pulse width see Figure 9
HIGH VCC = 2.0 V 100 - - ns
VCC = 4.5 V 20 - - ns
VCC = 6.0 V 17 - - ns
tsu set-up time nD to see Figure 8
LEnn VCC = 2.0 V 75 - - ns
VCC = 4.5 V 15 - - ns
VCC = 6.0 V 13 - - ns
th hold time nD to LEnn see Figure 8
VCC = 2.0 V 3 - - ns
VCC = 4.5 V 3 - - ns
VCC = 6.0 V 3 - - ns

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 9 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

Table 7. Dynamic characteristics …continued

GND = 0 V; tr = tf = 6 ns; CL = 50 pF; unless otherwise specified, see Figure 10.
Symbol Parameter Conditions Min Typ Max Unit
Tamb = 40 C to +125 C
tPHL, tPLH propagation delay see Figure 6
nD to nQ VCC = 2.0 V - - 165 ns
VCC = 4.5 V - - 33 ns
VCC = 6.0 V - - 28 ns
propagation delay see Figure 7
nD to nQ VCC = 2.0 V - - 180 ns
VCC = 4.5 V - - 36 ns
VCC = 6.0 V - - 31 ns
propagation delay see Figure 9
LEnn to nQ VCC = 2.0 V - - 180 ns
VCC = 4.5 V - - 36 ns
VCC = 6.0 V - - 31 ns
propagation delay see Figure 9
LEnn to nQ VCC = 2.0 V - - 190 ns
VCC = 4.5 V - - 38 ns
VCC = 6.0 V - - 32 ns
tTHL, tTLH output transition time see Figure 6 and 7
VCC = 2.0 V - - 110 ns
VCC = 4.5 V - - 22 ns
VCC = 6.0 V - - 19 ns
tW enable pulse width see Figure 9
HIGH VCC = 2.0 V 120 - - ns
VCC = 4.5 V 24 - - ns
VCC = 6.0 V 20 - - ns
tsu set-up time nD to see Figure 8
LEnn VCC = 2.0 V 90 - - ns
VCC = 4.5 V 18 - - ns
VCC = 6.0 V 15 - - ns
th hold time nD to LEnn see Figure 8
VCC = 2.0 V 3 - - ns
VCC = 4.5 V 3 - - ns
VCC = 6.0 V 3 - - ns

[1] CPD is used to determine the dynamic power dissipation (PD in W).
PD = CPD  VCC2  fi  N + (CL  VCC2  fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CL  VCC2  fo) = sum of outputs.

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 10 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

11. Waveforms

Q'LQSXW
90

W3+/ W3/+

Q4RXWSXW
90

W7+/ W7/+
DDE

VM = 0.5  VI
Fig 6. Waveforms showing the data input (nD) to output (nQ) propagation delays and the output transition times

Q'LQSXW
90

W3+/ W3/+

Q4RXWSXW
90

W7+/ W7/+
DDE

VM = 0.5  VI
Fig 7. Waveforms showing the data input (nD) to output (nQ) propagation delays and the output transition times

Q'LQSXW 90

WK WK
WVX WVX

/(QQLQSXW 90

Q4RXWSXW 4 ' 4 '

DDE

The shaded areas indicate when the input is permitted to change for predictable output performance.
VM = 0.5  VI
Fig 8. Waveforms showing the data set-up and hold times for nD input to LEnn input

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 11 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

Q'LQSXW

/(QQLQSXW 90

W:
W3+/ W3/+

Q4RXWSXW 90

W7+/ W7/+
W3/+ W3+/

Q4RXWSXW 90

W7/+ W7+/
DDE

VM = 0.5  VI
Fig 9. Waveforms showing the latch enable input (LEnn) pulse width, the latch enable input to outputs (nQ, nQ)
propagation delays and the output transition times

9&&

9, 92
38/6(
'87
*(1(5$725

57 &/

PQD

Test data is given in Table 8

Definitions for test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator
CL = Load capacitance including jig and probe capacitance
Fig 10. Test circuit for measuring switching times

Table 8. Test data

Supply Input Load
VCC VI tr, tf CL
2.0 V VCC 6 ns 50 pF
4.5 V VCC 6 ns 50 pF
6.0 V VCC 6 ns 50 pF
5.0 V VCC 6 ns 15 pF

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 12 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

12. Package outline

62SODVWLFVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627

' ( $
;

F

\ +( Y 0 $

=

 

4
$
$
 $
$
SLQLQGH[
ș
/S

  /

H Z 0 GHWDLO;
ES

  PP
VFDOH

',0(16,216LQFKGLPHQVLRQVDUHGHULYHGIURPWKHRULJLQDOPPGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ = ș
PD[
          
PP     
  
          R
          R
LQFKHV       
         

1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPLQFKPD[LPXPSHUVLGHDUHQRWLQFOXGHG

287/,1( 5()(5(1&(6 (8523($1

,668('$7(
9(56,21 ,(& -('(& -(,7$ 352-(&7,21


627 ( 06


Fig 11. Package outline SOT109-1 (SO16)

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 13 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

6623SODVWLFVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627

' ( $
;

F
\ +( Y 0 $

=

 

4
$ $
$ $


SLQLQGH[
ș
/S
/

  GHWDLO;

Z 0
H ES

  PP
VFDOH

',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ = ș
PD[

PP
          R
      
          R

1RWH
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG

287/,1( 5()(5(1&(6 (8523($1

,668('$7(
9(56,21 ,(& -('(& -(,7$ 352-(&7,21


627 02


Fig 12. Package outline SOT338-1 (SSOP16)

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 14 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

76623SODVWLFWKLQVKULQNVPDOORXWOLQHSDFNDJHOHDGVERG\ZLGWKPP 627

' ( $
;

F

\ +( Y 0 $

=

 

4
$ $

$
$
SLQLQGH[

ș
/S
/
 
GHWDLO;
Z 0
H ES

  PP
VFDOH

',0(16,216PPDUHWKHRULJLQDOGLPHQVLRQV
$
81,7 $ $ $ ES F ' ( H +( / /S 4 Y Z \ = ș
PD[

PP
          R
      
          R

1RWHV
3ODVWLFRUPHWDOSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG
3ODVWLFLQWHUOHDGSURWUXVLRQVRIPPPD[LPXPSHUVLGHDUHQRWLQFOXGHG

287/,1( 5()(5(1&(6 (8523($1

,668('$7(
9(56,21 ,(& -('(& -(,7$ 352-(&7,21


627 02


Fig 13. Package outline SOT403-1 (TSSOP16)

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 15 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

13. Abbreviations
Table 9. Abbreviations
Acronym Abbreviation
CMOS Complementary Metal Oxide Semiconductor
DUT Device Under Test
ESD ElectroStatic Discharge
HBM Human Body Model
LSTTL Low-power Schottky Transistor-Transistor Logic
MM Machine Model

14. Revision history

Table 10. Revision history
Document ID Release date Data sheet status Change notice Supersedes
74HC75 v.4 20160224 Product data sheet - 74HC75 v.3
Modifications: • Type number 74HC75N (SOT38-4) removed.
74HC75 v.3 20041112 Product data sheet - 74HC_HCT75_CNV v.2
Modifications: • The format of this data sheet has been redesigned to comply with the current presentation
and information standard of Philips Semiconductors.
• Removed type number 74HCT75.
• Inserted family specification.
74HC_HCT75_CNV v.2 19970918 Product specification - 74HC_HCT75 v.1
74HC_HCT75 v.1 19901201 Product specification - -

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 16 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

15. Legal information

15.1 Data sheet status

Document status[1][2] Product status[3] Definition
Objective [short] data sheet Development This document contains data from the objective specification for product development.
Preliminary [short] data sheet Qualification This document contains data from the preliminary specification.
Product [short] data sheet Production This document contains the product specification.

[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.

15.2 Definitions Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
Draft — The document is a draft version only. The content is still under
malfunction of an NXP Semiconductors product can reasonably be expected
internal review and subject to formal approval, which may result in
to result in personal injury, death or severe property or environmental
modifications or additions. NXP Semiconductors does not give any
damage. NXP Semiconductors and its suppliers accept no liability for
representations or warranties as to the accuracy or completeness of
inclusion and/or use of NXP Semiconductors products in such equipment or
information included herein and shall have no liability for the consequences of
applications and therefore such inclusion and/or use is at the customer’s own
use of such information.
risk.
Short data sheet — A short data sheet is an extract from a full data sheet
Applications — Applications that are described herein for any of these
with the same product type number(s) and title. A short data sheet is intended
products are for illustrative purposes only. NXP Semiconductors makes no
for quick reference only and should not be relied upon to contain detailed and
representation or warranty that such applications will be suitable for the
full information. For detailed and full information see the relevant full data
specified use without further testing or modification.
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the Customers are responsible for the design and operation of their applications
full data sheet shall prevail. and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
Product specification — The information and data provided in a Product design. It is customer’s sole responsibility to determine whether the NXP
data sheet shall define the specification of the product as agreed between Semiconductors product is suitable and fit for the customer’s applications and
NXP Semiconductors and its customer, unless NXP Semiconductors and products planned, as well as for the planned application and use of
customer have explicitly agreed otherwise in writing. In no event however, customer’s third party customer(s). Customers should provide appropriate
shall an agreement be valid in which the NXP Semiconductors product is design and operating safeguards to minimize the risks associated with their
deemed to offer functions and qualities beyond those described in the applications and products.
Product data sheet.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
15.3 Disclaimers customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Limited warranty and liability — Information in this document is believed to
Semiconductors products in order to avoid a default of the applications and
be accurate and reliable. However, NXP Semiconductors does not give any
the products or of the application or use by customer’s third party
representations or warranties, expressed or implied, as to the accuracy or
customer(s). NXP does not accept any liability in this respect.
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no Limiting values — Stress above one or more limiting values (as defined in
responsibility for the content in this document if provided by an information the Absolute Maximum Ratings System of IEC 60134) will cause permanent
source outside of NXP Semiconductors. damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
In no event shall NXP Semiconductors be liable for any indirect, incidental,
the Recommended operating conditions section (if present) or the
punitive, special or consequential damages (including - without limitation - lost
Characteristics sections of this document is not warranted. Constant or
profits, lost savings, business interruption, costs related to the removal or
repeated exposure to limiting values will permanently and irreversibly affect
replacement of any products or rework charges) whether or not such
the quality and reliability of the device.
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory. Terms and conditions of commercial sale — NXP Semiconductors
Notwithstanding any damages that customer might incur for any reason products are sold subject to the general terms and conditions of commercial
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards sale, as published at http://www.nxp.com/profile/terms, unless otherwise
customer for the products described herein shall be limited in accordance agreed in a valid written individual agreement. In case an individual
with the Terms and conditions of commercial sale of NXP Semiconductors. agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
Right to make changes — NXP Semiconductors reserves the right to make applying the customer’s general terms and conditions with regard to the
changes to information published in this document, including without purchase of NXP Semiconductors products by customer.
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior No offer to sell or license — Nothing in this document may be interpreted or
to the publication hereof. construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 17 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

Export control — This document as well as the item(s) described herein NXP Semiconductors’ specifications such use shall be solely at customer’s
may be subject to export control regulations. Export might require a prior own risk, and (c) customer fully indemnifies NXP Semiconductors for any
authorization from competent authorities. liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
Non-automotive qualified products — Unless this data sheet expressly
standard warranty and NXP Semiconductors’ product specifications.
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested Translations — A non-English (translated) version of a document is for
in accordance with automotive testing or application requirements. NXP reference only. The English version shall prevail in case of any discrepancy
Semiconductors accepts no liability for inclusion and/or use of between the translated and English versions.
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer 15.4 Trademarks
(a) shall use the product without NXP Semiconductors’ warranty of the
Notice: All referenced brands, product names, service names and trademarks
product for such automotive applications, use and specifications, and (b)
are the property of their respective owners.
whenever customer uses the product for automotive applications beyond

16. Contact information

For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com

74HC75 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.

Product data sheet Rev. 4 — 24 February 2016 18 of 19

NXP Semiconductors 74HC75
Quad bistable transparant latch

17. Contents
1 General description . . . . . . . . . . . . . . . . . . . . . . 1
2 Features and benefits . . . . . . . . . . . . . . . . . . . . 1
3 Ordering information . . . . . . . . . . . . . . . . . . . . . 1
4 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
5 Pinning information . . . . . . . . . . . . . . . . . . . . . . 4
5.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Functional description . . . . . . . . . . . . . . . . . . . 4
6.1 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Recommended operating conditions. . . . . . . . 5
9 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5
10 Dynamic characteristics . . . . . . . . . . . . . . . . . . 8
11 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 13
13 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 16
14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 16
15 Legal information. . . . . . . . . . . . . . . . . . . . . . . 17
15.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 17
15.2 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
15.3 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
15.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
16 Contact information. . . . . . . . . . . . . . . . . . . . . 18
17 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.

© NXP Semiconductors N.V. 2016. All rights reserved.

For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 24 February 2016
Document identifier: 74HC75