Professional Documents
Culture Documents
TV Sceptre X32GV-KOMODO PDF
TV Sceptre X32GV-KOMODO PDF
For all other inquiries, please call 1800-788-2878 and select option 4 or email
our customer service group at cs@sceptre.com.
HTU UTH
We recommend you register your SCEPTRE X32 HDTV with the enclosed
registration card and mail it in. For peace of mind and to protect your investment
beyond the standard warranty, SCEPTRE offers a two year extended warranty
service for your TV. This plan gives additional coverage once your standard
warranty period runs out. Please call our customer service group to purchase
the extended warranty.
-1-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
IMPORTANT INFORMATION
-2-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
IMPORTANT INFORMATION
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
• To avoid the risk of electric shock or component damage, switch off the power before
connecting other components to the X32 LCD TV.
• Unplug the power cord before cleaning the X32 LCD TV. A damp cloth is sufficient for
cleaning the X32 LCD TV. Do not use a liquid or a spray cleaner for cleaning the
product. Do not use abrasive cleaners.
• Always use the accessories recommended by the manufacturer to insure
compatibility.
• When moving the X32 LCD TV from an area of low temperature to an area of high
temperature, condensation may form on the housing. Do not turn on the X32 LCD TV
immediately after this to avoid causing fire, electric shock or component damage.
• Do not place the X32 LCD TV on an unstable cart, stand, or table. If the X32 LCD TV
falls, it can injure a person and cause serious damage to the appliance. Use only a
cart or stand recommended by the manufacturer or sold with the X32 LCD TV.
• Any heat source should maintain a distance of at least 5 feet away from the X32 LCD
TV, i.e. radiator, heater, oven, amplifier etc. Do not install the product too close to
anything that produces smoke or moisture. Operating the product close to smoke or
moisture may cause fire or electric shock.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation.
To ensure reliable operation of the X32 LCD TV and to protect it from overheating, be
sure these openings are not blocked or covered. Do not place the X32 LCD TV in a
bookcase or cabinet unless proper ventilation is provided.
• Never push any object into the ventilation slots of the X32 LCD TV. Do not place any
objects on the top of the Product. It could short circuit parts causing a fire or electric
shock. Never spill liquids on the X32 LCD TV.
• The X32 LCD TV should be operated only from the type of power source indicated on
the label. If you are not sure of the type of power supplied to your home, consult your
dealer or local power company.
• The power cable must be replaced when using different voltage from that specified in
the User Manual. For more information, contact your dealer.
• The X32 LCD TV is equipped with a three-pronged grounded plug, a plug with a third
(grounding) pin. This plug will fit only into a grounded power outlet as a safety feature.
If your outlet does not accommodate the three-wire plug, have an electrician install
the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the
-3-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
safety purpose of the grounded plug.
• Do not overload power strips and extension cords. Overloading can result in fire or
electric shock.
• The wall socket should be installed near the equipment and should be easily
accessible.
• Only the marked power source can be used for the product. Any power source other
than the specified one may cause fire or electric shock.
• Do not touch the power cord during thunderstorms. To avoid electric shock, avoid
handling the power cord during electrical storms.
• Unplug the unit during a lightning storm or when it will not be used for a long period of
time. This will protect the X32 LCD TV from damage due to power surges.
• Do not attempt to repair or service the product yourself. Opening or removing the
back cover may expose you to high voltages, the risk of electric shock, and other
hazards. If repair is required, please contact your dealer and refer all servicing to
qualified service personnel.
• Keep the product away from moisture. Do not expose this appliance to rain or
moisture. If water penetrates into the product, unplug the power cord and contact your
dealer. Continuous use in this case may result in fire or electric shock.
• Do not use the product if any abnormality occurs. If any smoke or odor becomes
apparent, unplug the power cord and contact your dealer immediately. Do not try to
repair the product yourself.
• Avoid using dropped or damaged appliances. If the product is dropped and the
housing is damaged, the internal components may function abnormally. Unplug the
power cord immediately and contact your dealer for repair. Continued use of the
product may cause fire or electric shock.
• Do not install the product in an area with heavy dust or high humidity. Operating the
product in environments with heavy dust or high humidity may cause fire or electric
shock.
• Hold the power connector when removing the power cable. Pulling the power cable
itself may damage the wires inside the cable and cause fire or electric shocks. When
the product will not be used for an extended period of time, unplug the power
connector.
• To avoid risk of electric shock, do not touch the connector with wet hands.
• Insert batteries in accordance with instructions while using the remote control.
Incorrect polarities may cause damage and leakage of the batteries, operator injury
and contamination the remote control.
• If any of the following occurs please contact the dealer:
o The power connector fails or frays.
o Liquid sprays or any object drops into the X32 LCD TV.
o The Display is exposed to rain or other moisture.
o The Display is dropped or damaged in any way.
o The performance of the Display changes substantially.
• Operating environment: Temperature: 5°C ~ 35°C, Humidity: 10% to 90% non-
condensing, Altitude: 0~10,000 ft.
-4-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
IMPORTANT INFORMATION
Lightning Protection
For added protection of the LCD TV during a lightning storm or when it is left
unattended or unused for long periods of time, unplug the LCD TV from the wall
outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could
fall into such power lines or circuits.
-5-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Package Contents
TV Stand x 1
User Manual x 1
Power Cord x 1
Screwdriver x 1
-6-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Installation
Please read the user manual carefully before performing the installation. The
power consumption of the display is approximately 170 watts. Please use the
power cord designated for the product. When an extension cord is required, use
one with the correct power rating. The cord must be grounded and the grounding
feature must not be defeated. The product should be installed on a flat surface to
avoid tipping. Space should be maintained between the back of the product and
the wall for proper ventilation. If you would like to mount the TV onto the wall,
please see page 13 for additional information. Avoid installing the product in the
kitchen, bathroom or other places with high humidity dust or smoke, so as not to
shorten the service life of the electronic components. Please ensure the product
is installed with the screen in landscape orientation. Any 90° clockwise or
counterclockwise installation may induce poor ventilation and successive
component damage.
1. Please handle the TV with two or more people. Please locate a large flat
surface (i.e. table) and put a soft cloth (i.e. blanket) on the surface. Please
set the TV facing up on the flat surface so the panel does not get damaged.
-7-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
2. Please connect the stand to the TV and secure the connection with the screw
driver and the 8 screws included in the accessory box.
3. You can screw them in from the bottom of the stand. DO NOT over tighten
the screws when installing the stand; otherwise the stand’s threading will
become stripped. Please Note: To disassemble the TV stand, for wall
mounting purposes, please repeat the step 1, but unscrew the 8 screws to
remove the stand.
-8-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Table of Contents
............................................................................................................... 35
If You Want the Good Connection with RCA Audio (analog)…
TU UT
............................................................................................................... 36 T
-9-
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Connecting a PC.................................................................................... 37
TU UT
Glossary .............................................................................................. 94
TU UT
- 10 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Front View
INDICATOR LIGHT – The light is red when power is plugged in but the TV is not
turned on. The light turns blue when the TV is turned on.
REMOTE SENSOR – The remote sensor receives all the commands from the
remote control.
- 11 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
- 12 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
POWER – Turn on the TV by pressing the button once. Press the button again
to turn off the TV.
SOURCE – This button switches between all the different sources of the TV.
The switching sequence is as follows : TV (cable or air), AV1 (CVBS), AV1 (S-
Video), AV2 (CVBS), AV2 (S-Video), YPbPr1, YPbPr2, HDMI, and VGA. When
the OSD is active, this button acts as the enter button and confirms the menu
selection.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is
active, pressing this button will return selection to the previous menu level.
CH(▲/▼) – These buttons change the TV channel up or down. If the OSD is
active, these buttons function as up or down controls for the menu.
VOL(+/-) – These buttons increase or decrease the TV’s volume. If a sub-menu
is active, pressing these buttons will move the selection left or right.
- 13 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
LINE OUT - This connection port is used for sending out audio signals to other
audio devices such as stereo/surround sound receivers and sending out video
signals to other video device such as TV monitor or VCR. The red (R) and white
(L) connectors send out the audio signal. The yellow (AV OUT) connector sends
out the video signal. The orange (COAXIAL SPDIF OUT) connector sends out
either bit-stream or PCM digital sound signal to a home theater receiver with
digital input. This connection uses RCA audio cable for sound, composite cable
for video, and a coaxial cable for digital out. Please note : You can only use the
red/white connection or the orange one. Do NOT connect both.
HDMI – Connects to devices that use HDMI cable, such as Blu-ray or HD DVD
player, or HD cable / satellite set-top box. This connection port receives pure
digital audio and high definition signal through one single cable. This port also
can accept a HDCP video device for video.
VGA - This connection port connects to a PC for video using VGA cable. Be sure
to connect your audio cable to the VGA Stereo input if you want sound out of
VGA video source.
VGA STEREO INPUT - This connection port is for people who want to provide
audio to the TV when using a PC or a DVI video device. The sources uses
3.5mm mini-jack audio cable to provides audio for a HDCP enabled DVI video
device or PCs with VGA connection.
COMPONENT 1 & 2 (YPbPr with Audi L/R) – These connection ports are for
DVD players, or satellite / cable set-top boxes that use component cables. From
left to right, connect green, blue, and red for video, and then connect white for left
channel audio, and red for right channel audio.
- 14 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
ATSC/NTSC – This connection is for digital or analog cable without the cable box
or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For over-
the airwave digital stations please check http://www.antennaweb.org.
HTU UTH
AC IN - This connection is for providing power to the TV. This connection uses a
standard computer power cord.
- 15 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
- 16 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Please insert two AAA batteries into the remote control. Make sure that you
match the (+) and (-) symbols on the batteries with the (+) and (-) symbols inside
the battery compartment. Afterwards, re-attach the battery cover.
Please note:
- 17 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
- 18 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Good HDCP
VGA STEREO 3.5mm devices,
INPUT mini-jack PC, MAC
(Audio)
Receiver
Best with Digital
LINE OUT Coaxial Surround
(Digital Audio) SPDIF Sound
Decoding
Any Stereo
Good or Better
LINE OUT RCA Audio Receiver,
(Audio) VCR, or
DVR
- 19 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
HDMI
Coaxial RF
VGA
Component
S-Video
- 20 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Composite
3.5 mm Mini-jack
RCA Audio
AC Power
Coaxial SPDIF
- 21 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
The X32 offers multiple ways of connecting your devices to the TV; the chart
below will help you understand which source you switch to for each of the ports.
HDMI or HDMI
HDMI-DVI
VGA VGA
- 22 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Please Note :
- 23 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Please Note :
- 24 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Please Note :
- 25 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Connect a HDMI cable to the HDMI port of your DVD player and the
other end to the HDMI port off the back of your X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your DVD player.
4. Use the remote control’s source button or the source button on the right
side of the TV to switch to HDMI.
Please Note :
• Please reference the DVD player’s manual as well, to make sure
the DVD player is configured to output correctly to the TV.
- 26 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Obtain a Component Cable. Connect the green color connector to both
your DVD player and Component 1’s green connector port off the back of
your X32 LCD HDTV.
3. Connect the blue color connector to both your DVD player and
Component 1’s blue connector port off the back of your X32 LCD HDTV.
4. Connect the red color connector to both your DVD player and
Component 1’s red connector port off the back of your X32 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and Component 1’s white connector port off the back of
your X32 LCD HDTV to the right side of your green, blue, red component
connection.
6. Connect the red color connector to both your DVD player and
Component 1’s red connector port off the back of your X32 LCD HDTV to
the right side of your green, blue, red component connection.
7. Turn on the X32 LCD HDTV and your DVD player.
8. Use the remote control’s source button or the source button on the right
side of the TV to switch to YPbPr1.
Please Note :
- 27 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both your
DVD player and Composite 1’s S-Video connector port off the back of
your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and Composite 1’s white connector port off the back of
your X32 LCD HDTV.
4. Connect the red color connector to both your DVD player and Composite
1’s red connector port off the back of your X32 LCD HDTV.
5. Turn on the X32 LCD HDTV and your DVD player.
6. Use the remote control’s source button or the source button on the right
side of the TV to switch to AV1 (S-Video).
Please Note :
- 28 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure the power of X32 LCD HDTV and your DVD player is turned
off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your DVD player and Composite 1’s Yellow Video connector port off
the back of your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both
your DVD player and Composite 1’s white connector port off the back of
your X32 LCD HDTV.
4. Connect the red color connector to both your DVD player and Composite
1’s red connector port off the back of your X32 LCD HDTV.
5. Turn on the X32 LCD HDTV and your DVD player.
6. Use the remote control’s source button or the source button on the right
side of the TV to switch to AV1 (CVBS).
Please Note :
- 29 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure the power of X32 LCD HDTV and your set-top box is turned
off.
2. Connect a HDMI cable to the HDMI output of your set-top box and the
other end to the HDMI port off the back of your X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your set-top box.
4. Use the remote control’s source button or the source button on the right
side of the TV to switch to HDMI.
Please Note :
• Please reference the set-top box’s manual, to make sure the set-
top box is configured to output correctly to the TV.
• Sceptre’s X32 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.
- 30 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure the power of X32 LCD HDTV and your set-top box is turned
off.
2. Obtain a Component Cable. Connect the green color connector to both
your set-top box and Component 1’s green connector port off the back of
your X32 LCD HDTV.
3. Connect the blue color connector to both your set-top box and
Component 1’s blue connector port off the back of your X32 LCD HDTV.
4. Connect the red color connector to both your set-top box and
Component 1’s red connector port off the back of your X32 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both
your set-top box and Component 1’s white connector port off the back of
your X32 LCD HDTV to the right side of your green, blue, red component
connection.
6. Connect the red color connector to both your set-top box and
Component 1’s red connector port off the back of your X32 LCD HDTV to
the right side of your green, blue, red component connection.
7. Turn on the X32 LCD HDTV and your set-top box.
8. Use the remote control’s source button or the source button on the right
side of the TV to switch to YPbPr1.
Please Note :
- 31 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure the power of X32 LCD HDTV and your set-top box is
turned off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both
your set-top box and Composite 1’s S-Video connector port off the
back of your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and Composite 1’s white connector port off the
back of your X32 LCD HDTV.
4. Connect the red color connector to both your set-top box and
Composite 1’s red connector port off the back of your X32 LCD
HDTV.
5. Turn on the X32 LCD HDTV and your set-top box.
6. Use the remote control’s source button or the source button on the
right side of the TV to switch to AV1 (S-Video).
- 32 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Please Note :
1. Make sure the power of X32 LCD HDTV and your set-top box is
turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your set-top box and Composite 1’s Yellow Video connector
port off the back of your X32 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and Composite 1’s white connector port off the
back of your X32 LCD HDTV.
- 33 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
4. Connect the red color connector to both your set-top box and
Composite 1’s red connector port off the back of your X32 LCD
HDTV.
5. Turn on the X32 LCD HDTV and your set-top box.
6. Use the remote control’s source button or the source button on the
right side of the TV to switch to AV1 (CVBS).
Please Note :
- 34 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure the power of X32 LCD HDTV and your receiver is turned
off.
2. Obtain a Coaxial SPDIF cable, connect it to your receiver’s coaxial
SPDIF digital input and the Coaxial SPDIF connection on the LINE
OUT port off the back of the X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your receiver.
Please Note :
1. Make sure the power of X32 LCD HDTV and your receiver is turned
off.
2. Obtain a RCA Audio cable, connect it to your receiver’s RCA audio
analog input and the RCA Audio connection on the LINE OUT port
off the back of the X32 LCD HDTV.
3. Turn on the X32 LCD HDTV and your receiver.
Please Note :
- 36 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Connecting a PC
1. Make sure the power of X32 LCD HDTV and your PC is turned off.
Please Note :
- 37 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Make sure your power cable is connected and the standby red light in
the front of the TV is lit up.
2. Check all your connection cables off the side or the back of your TV and
also your AV devices. Make sure they are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.
1. Open up the OSD by pressing the MENU button on the remote control.
2. Make sure CHANNEL main option is highlighted in yellow; if not please
use the ▲ or ▼ buttons to select CHANNEL then press the ► direction
button to switch to TUNER MODE function.
- 38 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
7. Once you have made the selection, the OSD will return you back to
CHANNEL main options. Press the ▼ button to highlight the AUTO
SCAN function and press ↵ twice to start scanning for channels.
8. Once the scanning is done, you can watch the TV.
Please Note :
• Not all broadcasts are in High Definition (HD). Please refer to
your local broadcasting stations for more information.
• The X32 LCD HDTV’s tuner is designed for HDTV therefore
requires a stronger signal than normal TVs. If you cannot
achieve that signal level with your antenna or cable, your X32
LCD HDTV might lose picture or sound.
- 39 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
In order to adjust most of the options inside the OSD (On Screen Display), the
picture below shows all the buttons used on the remote control.
▲ – This button changes the channel to a higher number and also functions as
up direction in the OSD.
▼ – This button changes the channel to a lower number and also functions as
down direction in the OSD.
◄ – This button decreases the volume and also functions as left direction in the
OSD.
► – This button increases the volume and also functions as right direction in the
OSD.
↵ – This button changes the channel in conjunction with the number pad and
also functions as enter for selecting options in the OSD.
– This button opens the OSD and also exits the OSD by going to the
previous level of the OSD.
CH(▲) – This button changes the channel to a higher number and also functions
as up direction in the OSD.
CH(▼) – This button changes the channel to a lower number and also functions
as down direction in the OSD.
VOL(+) – This button decreases the volume and functions as left direction in the
OSD.
VOL(-) – This button decreases the volume and functions as right direction in the
OSD.
- 41 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
TUNER MODE – This function allows users to choose what connection the TV is
accepting.
Please Note :
- 43 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
AUTO SCAN – This function scans all the channels available from the
ATSC/NTSC port.
Please Note :
- 44 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
CHANNEL EDIT – This function allows users to add, delete, or add to favorites,
the TV’s scanned in channels.
- 45 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
5. You will be able to edit the channels by either deleting the channel or
adding the channel to the favorites list.
a. You can delete the channel by removing the 9 from the ADD
column.
i. Match the channel you want to remove with the ▲▼◄►
buttons in the ADD column then press ↵. If you do this,
you will not be able to browse that channel until you go
back into channel edit and add the 9 back.
ii. Press the MENU button to save and exit.
the ♥ .
ii. Press the MENU button to save and exit.
- 46 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
SIGNAL STRENGTH – This function allows users to view their digital channel’s
signal strength.
Please Note :
- 47 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
EXTERNAL INPUT – This function allows users to change the current source to
another.
- 48 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
PICTURE MODE – This function allows you to select the various picture modes
of the TV from custom, standard, mild, to vivid.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ↵ or ► to select PICTURE MODE function.
4. Use ▲ or ▼ to select which picture mode you want.
5. Press ↵ to confirm your selection.
Please Note :
• CUSTOM allows you to adjust all the settings to your personal
preference.
• STANDARD is for watching regular TV.
• MILD is for watching movies.
• VIVID is for watching sports and HDTV programming.
• RECALL is not a picture mode but a function to restore any
changes under CUSTOM picture mode back to its original
factory settings.
- 49 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
BRIGHTNESS – This function adjusts the black level in a picture.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ to select BRIGHTNESS function and press ↵.
4. Use ◄ or ► to adjust the brightness level.
Please Note :
• This function can be reset back to default via the RECALL
subfunction under PICTURE MODE.
• If the brightness is too high, the picture will look washed out,
if the brightness is too low the picture will not have much
detail in dark spots of the picture.
- 50 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
SATURATION – This function adjusts how strong your picture’s colors are going
to be.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select SATURATION function and press ↵.
4. Use ◄ or ► to adjust the saturation level.
Please Note :
• This function can be reset back to default via the RECALL
subfunction under PICTURE MODE.
- 51 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
CONTRAST – This function adjusts the white levels in a picture.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select CONTRAST function and press ↵.
4. Use ◄ or ► to adjust the contrast level.
Please Note :
• This function can be reset back to default via the RECALL
subfunction under PICTURE MODE.
• If the contrast is too high, the picture will not have any details
in bright parts of the picture. If the contrast is too low, the
picture will look washed out.
- 52 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
SHARPNESS – This function adjusts how sharp objects in your pictures are.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select SHARPNESS function and press ↵.
4. Use ◄ or ► to adjust the sharpness level.
Please Note :
• This function can be reset back to the default via the
RECALL subfunction under PICTURE MODE.
• If the sharpness is adjusted too high, the picture will look
overly pixilated. If the sharpness is adjusted too low, the
picture will look blurry.
- 53 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
TINT – This function adjusts your picture’s overall color with everything looking
green on one end and everything looking red on the other.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select TINT function and press ↵.
4. Use ◄ or ► to adjust the tint level.
Please Note :
• This function can be reset back to the default via the
RECALL subfunction under PICTURE MODE.
- 54 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
RGB (RED, GREEN, BLUE) – This function adjusts the white color’s overall
balance of white colors in a picture. Each color, red, green, and blue will fine
tune the overall white color’s balance in small increments..
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select RGB function and press ↵.
4. Use ◄ or ► to adjust the RGB’s 3 color levels level.
5. Use ▲ or ▼ to select the 3 colors; red, green, and blue.
Please Note :
- 55 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
COLOR TEMP. – This function adjusts the white color’s overall balance of white
colors in a picture. The function changes the white color’s overall balance in
large increments.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select COLOR TEMP. function and press ↵.
4. Use ◄ or ► to adjust the color temperature level.
5. Press ↵ to finalize your selection.
Please Note :
• This function can be reset back to the default via the
RECALL subfunction under PICTURE MODE.
• COOL – This option will produce a picture with overall bluish
color.
• NORMAL – This option will produce a picture with normal
white color.
• WARM – This option will produce a picture with overall
reddish color.
- 56 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
DNR (DIGITAL NOISE REDUCTION) – This function reduces the amount of
pixilation under analog TV channels. This function works for analog TV channels
only.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select DNR function and press ↵.
4. Use ◄ or ► to adjust the DNR’s 3 levels (minimum, medium, and
maximum).
5. Press ↵ to finalize your selection.
Please Note :
• This function can be reset back to the default via the RECALL
subfunction under PICTURE MODE.
• This function works under analog TV channels only.
- 57 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
BACKLIGHT CONTROL – This function adjusts the LCD lamp’s current. The
current affects the brilliance of the picture.
1. Press MENU to open the OSD and highlight PICTURE by pressing the
▼ button.
2. Press ↵ or ► to move to the functions and highlight PICTURE MODE.
3. Press ▼ repeatedly to select BACKLIGHT CONTROL function and press
↵.
4. Use ◄ or ► to adjust the backlight level.
Please Note :
• The backlight level does not affect the brightness or the contrast
of the picture. It just affects the brilliance of the picture.
• This function can be reset back to the default via the RECALL
subfunction under PICTURE MODE.
- 58 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
This option allows users to adjust the TV’s sound functions, including sound
mode, auto volume level, digital audio out..etc.
SOUND MODE – This function allows you to select various sound modes among
custom, standard, movies, music, and speech.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ↵ or ► to select SOUND MODE function.
4. Use ▲ or ▼ to select which sound mode you want.
5. Press ↵ to confirm you selection.
Please Note :
• This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
• CUSTOM allows you to adjust the sound levels to your personal
preference.
• STANDARD is for normal TV programs.
• MOVIES – is for watching movies.
• MUSIC – is for watching MTVs and concerts.
• SPEECH – is for watching news.
• RECALL – is not a sound mode but a function to reset CUSTOM
sound mode back to it’s default settings.
- 59 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
TREBLE – This function adjusts the level of high pitch sound in a TV.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select TREBLE.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to adjust the level.
Please Note :
• This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 60 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
BASS – This function adjusts the level of low pitch sound in a TV.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select BASS.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to adjust the level.
Please Note :
• This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 61 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
BALANCE – This function adjusts the balance of sound from left to right.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select BALANCE.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to adjust the level.
Please Note :
• This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 62 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
AVL (Auto Volume Level) – This function will enable an automatic balancing of
sound when certain channels suddenly become over bearing.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select AVL.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to enable or disable the auto volume level.
Please Note :
• This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 63 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
AUDIO LANGUAGE – This function is for MTS (multi-channel television sound).
It will change the spoken language of a TV program via SAP (secondary audio
programming). The TV station will need to support the TV program in different
languages in order for this function to work.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select AUDIO LANGUAGE.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to switch between the languages.
Please Note :
• This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
• This function is not always available. It is based upon the
support of your local TV broadcasting station’s signal. If the TV
station does not support MTS/SAP, you will not be able to
receive any alternative audio language. Please check with your
local broadcasting stations for more information.
- 64 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
DIGITAL AUDIO OUT – This function enables the TV to output sound in 2 digital
formats, PCM, and Bit Stream for digital home theater receivers.
1. Press MENU to open the OSD and highlight SOUND by pressing the ▼
button.
2. Press ↵ or ► to move to the functions and highlight SOUND MODE.
3. Press ▼ repeatedly to select DIGITAL AUDIO OUT.
4. Press ↵ or ► to select the function.
5. Use ◄ or ► to select between the two options PCM and BITSTREAM.
Please Note :
• PCM & BIT STREAM are two formats of digital sound. If you
have a digital home theater system, you should use BIT
STREAM for your digital audio out.
• Not all TV programming will give you digital surround sound.
The sound signal is based on the TV broadcasting station’s
support. Please check with your local broadcasting stations for
more information.
• This function can be reset back to the default via the RECALL
subfunction under SOUND MODE.
- 65 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
- 66 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. SET BLOCKING – This subfunction turns blocking from CHANNEL
BLOCKING on or off.
Please Note :
- 67 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
2. CHANNEL BLOCKING – This subfunction blocks channels by selecting
them off a channel list.
Please Note :
- 68 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
3. BLOCK BY RATING – This subfunction blocks channels by reading each
channel’s TV program or movie rating.
Please Note :
• This type of filtering for children watching TV will not always
work since the ratings signal is dependent on whether the
TV station sends the signal or not and whether the TV
receives the ratings signal or not. For better assurance
please use the CHANNEL BLOCKING subfunction.
- 69 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
4. DTV RATING – This subfunction gathers all digital channels’s
programming rating.
Please Note :
• This type of ratings for children watching TV will not always
work since the ratings signal is dependent on whether the
TV station sends the signal or not and whether the TV
receives the ratings signal or not. For better assurance
please use the CHANNEL BLOCKING subfunction.
- 70 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
5. SETUP CODE – This subfunction sets the password.
Please Note :
- 71 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see CAPTION and use ↵ to select it.
4. Use ▲▼◄► to select the option you want.
5. US stations usually use CC1 for analog and CS1 for digital closed
captioning.
6. Other CC and CS services do not apply to TV captioning inside US.
7. TT refers to text boxes that display the TV channel’s extra information.
Please Note :
• Analog and digital closed captioning will automatically switch for you
when you switch channels.
• Not all TV programs support closed captioning. This function
depends on the TV station to support the signal with captioning. For
more information please contact your TV broadcasting stations.
• TT box information may or may not display any related info to the TV
program you are watching
- 72 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
CAPTION OPTION – This function locks or unlocks options you can use to
adjust the way your digital caption is displayed.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see CAPTION OPTION and use ↵ to select it.
4. Use ◄ or ► to select the option you want.
5. AUTO locks up the functions CC BACKGROUND and CAPTION TEXT.
6. OPTIONS unlocks the functions CC BACKGROUND and CAPTION
TEXT.
Please Note :
- 73 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
CC BACKGROUND – This function adjusts digital channel’s closed captioning
background.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see CC BACKGROUND and use ↵ to select it.
4. Use ▲▼◄► to select the option you want.
5. The normal closed captioning defaults to a solid black background with
white color text.
6. COLOR adjusts the background color.
7. OPACITY adjusts how transparent or solid you want the background
color to be.
Please Note :
- 74 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
CAPTION TEXT – This function adjusts digital channel’s closed captioning text
styles.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see CAPTION TEXT and use ↵ to select it.
4. Use ▲▼◄► to select the options you want.
5. The normal closed captioning defaults to a solid black background with
white color text.
6. CAPTION SIZE changes the font size of the text.
7. CAPTION STYLE changes the font style of the text.
8. TEXT COLOR changes the font color of the text.
9. TEXT OPACITY changes the caption text from transparent to solid.
10. EDGE STYLE enhances a caption text’s visibility by adding a 3
dimensional detail to the text. There are various options to this
subfunction.
11. EDGE COLOR changes the 3 dimensional effect’s color.
12. ITALIC makes the caption text look slanted.
13. UNDERLINE puts a line across the bottom of the caption text.
Please Note :
• These options only work under digital channels. If you are on an
analog channel this function will default to the regular black
background with white text.
- 75 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
GUIDE – This function shows you detailed information about your current digital
channel’s programming and the entire day’s program list.
1. Press MENU to open the OSD and highlight FUNCTION by pressing the
▼ button.
2. Press ↵ or ► to select the functions and highlight AUTO LOCK.
3. Press ▼ until you see GUIDE and use ↵ twice to select it.
- 76 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ↵ to select the function.
4. Use ▲▼◄► to select the options.
5. MANUAL allows you to choose your own time and date.
6. AUTO makes the TV receive time from TV station’s broadcasting signals.
7. You can select the time zone of your TV and also whether you observe
daylight savings time or not.
Please Note :
- 77 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
POWER ON TIME – This function automatically turns the TV on to a specific
channel at a set specific time and date.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ to select POWER ON TIME and press ↵.
4. Use ▲▼◄► to select the options.
5. You choose the time, date, and channel.
6. After you have finished setting up the time, date, and channel, please
choose if you want this option to turn on the TV daily or once only.
7. Select ACTIVATE and press ↵.
Please Note :
• This function is only for turning on the TV. If you do not setup
POWER OFF TIME function, the TV will never turn itself off. If
you are going on vacation for a long time, please do not forget to
set the function POWER OFF TIME.
- 78 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
POWER OFF TIME – This function automatically turns the TV off at a set specific
time and date.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select POWER OFF TIME and press ↵.
4. Use ▲▼◄► to select the options.
5. You choose the time, and date.
6. After you have finished setting up the time, and date, please choose if
you want this option to turn on the TV daily or once only.
7. Select ACTIVATE and press ↵.
- 79 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
SLEEP – This function makes the TV turn itself off after a set number of minutes.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select SLEEP and press ↵.
4. Use ▲ or ▼ to select how many minutes you want the TV to be on and
press ↵.
5. Once selected the TV will begin counting the minutes immediately.
- 80 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
MENU LANGUAGE – This function changes the entire OSD’s language.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select MENU LANGUAGE and press ↵.
4. Use ◄ or ► to select language you want the TV to display the OSD in
and press ↵.
5. Once selected the TV will display the language of your choice.
- 81 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
MENU OPACITY – This function changes the OSD menu’s visual from
transparent to solid.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select MENU OPACITY and press ↵.
4. Use ◄ or ► to select how transparent or solid you want to display the
OSD in and press ↵.
- 82 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
EMERGENCY ALERT – This function adjusts options regarding your local
emergency broadcasting service.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select EMERGENCY ALERT and press ↵.
4. Use ▲▼◄► to select if you want to display medium or low emergency
alerts in your local area and press ↵.
Please Note :
- 83 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
PC – This function is for people who use the X32 LCD HDTV’s VGA port as a PC
monitor only. The function adjusts the position and syncs the signal of the PC.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼ button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select PC and press ↵.
4. Use ▲ or ▼ to select the subfunction you want and press ↵.
5. AUTO ADJUST is a typical LCD monitor’s auto adjust function. It syncs to the
signal of the VGA card and auto adjusts the clock and phase of the signal so
your picture comes out clear and centered.
6. HOR.CENTER moves the picture left or right.
7. VER.CENTER moves the picture up or down.
8. PHASE adjusts the video signal in a small increment to sync with the PC.
9. CLOCK adjusts the video signal in a large increment to sync with the PC.
10. PREF. RESOLUTION is a special function for two specific resolutions. They are
1360x768 at 60hz refresh rate and 1280x768 at 60hz refresh rate. These two
resolutions are the only two that are proportionate to the LCD screen itself. If you
are using those two resolutions, you will need to set the screen to those
resolutions using this function. To set them, change your PC side resolution first,
and then select this function.
Please Note :
• The X32 LCD HDTV’s best PC resolution is 1360x768 at 60hz.
• Always try to use AUTO ADJUST over manual adjustments.
- 84 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
MENU TIMEOUT – This function adjusts how long the menu will be on the
screen when you’re not using it.
1. Press MENU to open the OSD and highlight SETUP by pressing the ▼
button.
2. Press ↵ or ► to select the functions and highlight DATE/TIME.
3. Press ▼ repeatedly until you select MENU TIMEOUT and press ↵.
4. Use ▲ or ▼ to select how long you want the OSD to display when it is
idle.
5. Please finalize the selection by pressing ↵.
- 85 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Detailed Explanations
The info banner is a banner that shows TV programming info on the top portion
of your TV. This function is only available when you use the ATSC/NTSC tuner
port.
The info banner’s left side shows you typical programming information such as
TV station name, number, program name, date, and times the show starts and
ends.
- 86 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
The info banner’s right side shows you the TV’s display information such as HD
(High Definition) or SD (regular TV) mode, stereo sound, closed captioning, and
digital surround sound.
((S)) – If Highlighted this symbol shows you that the channel you
are watching is in stereo sound.
- 87 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
- 88 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
• This symbol and the indicator bar show you how strong
your current channel’s signal is. This function is only
available under digital channels.
The TV will display the TV channel’s signal format automatically. There are
mainly two types of signal format, 16:9 and 4:3.
1. 16:9 Wide
This mode will stretch the picture to a widescreen ratio. If you have a perfect
16:9 ratio picture you will not see any black bars. If you are watching a
widescreen movie in 1.85:1 or 2.35:1 ratio, you will still get black bars on the
top and bottom of the screen.
- 89 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
2. 16:9 Normal
This mode will squeeze a 16:9 picture into a 4:3 format with black bars on the
side.
3. 4:3 Wide
Most analog TV channels have 4:3 signal formats. If the original 4:3 aspect
ratio (1.33:1 source) is preserved, black bars are added to the left and right
of the display image. This aspect stretches the picture to fill up the screen so
that the black bars will not be present. Please Note : You will receive a
distorted image when selecting this mode.
- 90 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
4. 4:3 Normal
Most analog TV channels have 4:3 signal formats. If the original 4:3 aspect
ratio (1.33:1 source) is preserved, black bars are added to the left and right
of the display image. This aspect keeps that aspect ratio and shows you the
black bars on the side.
5. 4:3 Zoom
When watching a 4:3 aspect ratio TV or movie, this mode zooms in to cut off
most of the black bars on the side while preserving the 16:9 ratio. Because
of the zoom, the top and bottom are cut off as well. Please Note : When in
HD mode aspect ratios will not work because it is controlled by the signal.
- 91 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
some VHS home video tapes, at the election of the program provider.
• Not all programs and VHS video tapes offer closed caption. Please look
for the CC symbol to ensure that captions will be shown.
• In the Closed Caption system, there can be more than one caption
service provided. Each is identified by its own number. The CC1 and
• In the Closed Caption system, the TEXT1 or TEXT2 services display text
that is unrelated to the program being viewed (e.g., weather or news).
These services are also superimposed over the program currently being
viewed.
Rating Explained
General Operation
To block channels you don’t want your children to watch, you can filter them with
the ratings function. MPAA lets you control ratings for movies. For regular TV
programs you can use USTV settings. USTV settings lets you filter what content
you want at each age level, TV-Y, to TV-MA (refer to definitions below). Below
are definitions for each setting.
- 92 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
USTV Rating
TV-Y (USTV) – For All Children
This program is designed to be appropriate for all children. Whether animated or
live-action, the themes and elements in this program are specifically designed for
a very young audience, including children from ages 2-6. This program is not
expected to frighten younger children.
- 93 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
following: graphic violence (V), explicit sexual activity (S), or crude indecent
language (L).
TV program description
FV - Fantasy Violence
V - Violence
S - Sexual Situations
L - Adult Language
D - Sexually Suggestive Dialog
MPAA Rating
G (MPAA)
General audiences. All ages admitted.
PG (MPAA)
Parental guidance suggested. Some material may not be suitable for children.
PG-13 (MPAA)
Parents strongly cautioned. Some material may be inappropriate for children
under 13.
R (MPAA)
Restricted. Under 17 requires accompanying parent or adult guardian (age varies
in some juridictions).
NC-17 (MPAA)
No one 17 and under admitted.
X (MPAA)
X is an older rating that is unified with NC-17 but may be encoded in the data of
older movies.
Glossary
HDTV – Television with the best quality picture, wide screen 16:9 display with at
least 720 progressively scanned lines (720P) or 1080 interlaced lines (1080i) and
digital surround sound. HDTV provides 900,000 – 2.1 million pixels.
Interlace Scan – A way to scan vertical lines onto a TV picture by scanning all
the odd lines first, then filling in the even lines (this happens instantaneously). In
a fast moving action picture or sports channel, this type of scanning will show
pixilation.
IMPORTANT
1. The power cable has to be removed from the socket before cleaning
the TV.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the
TV. These types of chemicals might damage the housing and the
LCD glass.
- 95 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
clean water and wipe again. Wipe the display with a dry micro-fiber
cloth or 100% cotton cloth afterwards.
Please Note :
• Make sure you wring the water out of the cloth before
cleaning the bezel or remote in order to prevent water
from penetrating into the electronics.
Trouble Shooting
The following table contains the common problems and the solutions to these
problems. Please check this list before you contact the technicians.
Problems Solutions
Connect power cord correctly.
Turn on power.
NO Connect video cable correctly.
PICTURE Select the input signal source with proper cable connection with
the source button.
ABNORMAL Match the colors on the cables to the ports off the back of the
COLORS television. I.E. red cable to red colored port.
PICTURE IS Adjust your contrast, brightness and lamp settings from the OSD
TOO DARK Menu.
AUDIO Make sure you have connected both your video and audio cables.
ONLY NO
The TV’s tuner signal must not be lower than 65 dB.
PICTURE
- 96 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Problems Solutions
PICTURE ONLY Make sure the audio cable is connected.
NO AUDIO Readjust your volume via the remote control.
The TV’s tuner signal must not be lower than 65 dB.
Turn off the TV, unplug it from the socket. Remove the
batteries out of the remote for 30 minutes. Press the remote
REMOTE buttons and the power button randomly for a good 2 seconds,
CONTROL and then reinstall the batteries. Try the remote to see if it
DOES NOT works.
WORK The TV’s remote sensor is also housed in the same place as
the power indicator light. Please make sure there is line of
sight from the remote control’s front sensor to the remote
sensor of the TV.
CANNOT The TV’s tuner signal must not be lower than 65 dB. Change
RECEIVE the direction of your antenna and rescan your channels. If
SUFFICIENT you have cable call up your cable company and ask about
CHANNELS signal strength of your local cable.
THROUGH THE
ATSC/NTSC
TUNER
Please adjust your picture setup and make sure the saturation
NO COLOR and the RGB are not turned all the way down.
The TV’s tuner signal must not be lower than 65 dB. Check
your signal.
WEAK SIGNAL The TV’s tuner signal must not be lower than 65 dB. Change
OR NO the direction of your antenna and rescan your channels. If
PROGRAM you have cable call up your cable company and ask about
SYMBOL ON signal strength of your local cable.
SCREEN
TV CHANNELS Check your auto lock function’s settings inside the OSD. You
ARE BLOCKED may have locked up some channels but forgot about them.
UNIVERSAL This TV follows SONY’s universal remote code. Please check
REMOTE CODE your hand book for SONY’s codes then apply them.
THE TV TURNS This TV is a High Definition liquid crystal display panel TV. It
ON OR OFF requires a few more seconds than normal TVs to power up
SLOWLY AND and show the picture.
THE SCREEN
SHOWS UP
SLOWLY
NO SOUND ON Make sure you have a 3.5 mm mini-jack cable connected from
PC your pc’s sound output to the TV’s VGA STEREO INPUT.
- 97 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Problems Solutions
HDCP VIDEO Reboot your HDCP video device but turning them off and
SAYS NO HDCP unplugging the power cord. Wait up to 8 minutes to plug the
SUPPORT power back in to see if it works or not.
Make sure you have a 3.5 mm mini-jack cable connected from
HDCP VIDEO your HDCP video device’s sound output to the TV’s VGA
HAS NO AUDIO STEREO INPUT. If your HDCP video device uses RCA
AUDIO jacks, you’ll need to obtain a RCA audio converted
into 3.5 mm mini-jack cable.
CANNOT GET Although the screen’s max resolution is 1366x768, no video
1366X768 ON card maker can support such resolution. The industry
PC VGA standard for similar resolution support is 1360x768. Please
use that as you resolution.
PICTURE IS This might be from interference from large electrical
DISTORTED OR appliances, cars, motorcycles, or fluorescent lights. If the TV
HAS ABNORMAL is close to the wall, try moving the TV to another room in your
SOUND house to see if the problem still occurs.
If you’re using HDMI or a TV digital channel make sure you
use the ASPECT button to switch to 16:9 WIDE format. If you
are using VGA, use the AUTO ADJUST function to adjust to
PICTURE DOES the screen. Please Note : If you are using 1360x768 or
NOT COVER 1280x768 you must also use the PREF. RESOLUTION
THE ENTIRE function to adjust to the screen as well. If you are using
SCREEN regular analog TV, AV2, AV2, or component in 480i
resolution, use the ASPECT button to switch to 4:3 WIDE in
order to fill up the screen. Please Note : This note this feature
will distort the picture.
For best image quality, view HD widescreen programs where
possible. If HD content is not available view “Standard
PICTURE Definition” from a digital source. Standard, analog TV will
QUALITY IS always be noticeable inferior to HD because your X32 LCD
HORRIBLE!! HDTV has video that is many times better than old TV’s and
so you can see interference and deficiencies you did not
KNOW you had.
PICTURE HAS Your X32 LCD HDTV is manufactured using an extremely
PIXELS THAT high level of precision technology, however, sometimes some
ARE ALWAYS pixels of your X32 LCD HDTV may not display. Pixels defects
DISPLAYING within industry specifications are inherent to this type of
THE SAME product and do not constitute a defective product.
COLOR
- 98 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Problems Solutions
SWITCHING A Different channels and inputs will sometimes have this effect
CHANNEL OR because the channel signal’s own volume is already loud.
SOURCE There is no way remove this completely. The TV has an
CHANGES THE AUTO VOLUME LEVEL function that can combat this type of
VOLUME effect. Please make sure that function is turned on.
THERE IS When your LCD HDTV’s resolution is higher than the digital
NOISE OR channel’s broadcast resolution, the signal is up-converted to
TRASH PIXELS match your TV’s resolution. Up-converting can cause this
ON THE type of effect.
SCREEN
TIPS FOR HIGH The X32 LCD HDTV is an ideal platform for viewing High
DEFINITION Definition Content. The best image quality can be achieved
USERS by HDMI, YPbPr (Component), then VGA. However, due to
variances in broadcast practices, it is possible some image
distortions can occur.
TIPS FOR Letterboxed (Widescreen) versions of DVD movies are most
LETTERBOX commonly formatted for standard 4:3 TVs. The X32 LCD
CONTENT HDTV has the capability of expanding this content so the
USERS entire screen is filled at the expense of the image proportion.
To use this function press the aspect button on the remote
control and cycle among the available options.
- 99 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Products are often returned due to a technical problem rather than a defective
product that may result in unnecessary shipping charges billed to you. Our
trained support personnel can often resolve the problem over the phone or email.
For more information on warranty services or repairs after the warranty period,
please contact our support department at the number below.
For technical help, contact our Sceptre Technical Support Group via email or
phone. Please have your Sceptre p/n number, serial number, and date of
purchase available before you call.
TEL : 1800-788-2878
Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM Pacific Standard Time
- 100 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Specification
Display panel
Item Illustration
TV DISPLAY
31½“(W)x21½“(H)x4”(D) inch without Base
Dimension
31½“(W)x23½“(H)x9½”(D) inch with Base
Weight 30.4 lbs with Base
Power input 100-240AVC, 50/60Hz, 2.5A max
Function
(1)Video
De-interlace 3D
Frame recover 3:2
Noise reducing core technology 3D
16:9 Wide, 16:9 Normal, 4:3 Wide, 4:3
Aspect ratio
Normal, 4:3 Zoom
- 101 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
PC timing
1360*768@60Hz(NATIVE)
1280*768@60Hz
1024*768@75Hz
800*600@75Hz
640*480@75Hz
(4)NTSC/ATSC
Sound: Mono / Stereo / SAP
Favorite Channel
NTSC V-chip
Closed caption
(CC1-CC4, Text 1-Text 4)
Sound: Mono / Stereo / SAP
Favorite Channel
ATSC V-chip
Video input format: 1080i, 720p, 480p, 480i
- 102 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
- 103 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
SCEPTRE’s Responsibility
SCEPTRE Displays purchased in the United States are warranted to be free from
defects in materials or workmanship for a period of one (1) year from the date of
their original retail purchase. If the unit fails to conform to this warranty, we will
service the monitor using new or refurbished parts.
Service Labor
During a period of one (1) year from the effective warranty date, SCEPTRE will
provide, when needed, service labor to repair a manufacturing defect at its
designated Service Center. To obtain warranty service in the Untied States, you
must first call our Customer Support at (800) 788-2878. The determination of
service will be made by SCEPTRE Customer Support. PLEASE DO NOT
RETURN YOUR UNIT TO SCEPTRE WITHOUT PRIOR AUTHORIZATION.
Parts
New or remanufactured replacements for defective parts will be used for repairs
by SCEPTRE at its designated Service Center for one (1) year from the effective
warranty date. Such replacement parts are warranted for the remaining portion of
the original warranty period.
Service
During the one (1) year warranty period, SCEPTRE will, at its option and sole
discretion, repair or replace defective parts, including replacement of the entire
Panel. The Customer will be required to ship the unit to the Service Center
indicated at the time Customer Support is contacted to make the necessary
repairs, you are responsible for all transportation charges to the service facility.
SCEPTRE is not responsible for the de-installation or re-installation of the unit.
Owner’s Responsibility
Effective Warranty Date
Warranty begins on the date of sale to the end user. To ensure warranty service,
keep the dated bill or sale receipt as evidence of the purchase date.
- 105 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Warranty Service
For warranty service information, contact SCEPTRE Customer Support at (800)
788-2878, 8:30 am to 5:30 pm PST or visit www.Sceptre.com. Parts and service
labor that are SCEPTRE’s responsibility (see above) will be provided without
charge. Other service is at the owner’s expense. You must provide the model,
serial number and date of purchase. Before you ask for warranty service, read
your User Manual. You might avoid a service call.
Warranty conditions are subject to change, for latest Warranty Terms and
Conditions and additional information regarding your warranty, please see
complete details online at www.SCEPTRE.com.
- 106 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual
Please Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Caution: To comply with the limits for an FCC Class B computing device,
always use the signal cord and power cord supplied with this unit.
European Notice
Products with the CE marking comply with both the EMC Directive (89/336/EEC),
(93/68/EEC) and the Low Voltage Directive (72/23/EEC) issued by the
Commission of the European Community.
- 107 -
www.SCEPTRE.com