Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 56 views

    Internal Pressure Analysis Branch/Tee Acc. To EN 13480-3 (Edit. 2017)

    Uploaded by

    Domagoj Butumović
    This document provides the results of an internal pressure analysis for a pipe branch/tee according to EN 13480-3. The analysis was conducted for a DN150.0/DN65.0 branch with input data including nominal diameters, material properties, design pressures and temperatures, outer diameters, wall thicknesses, and other dimensions. The results show the calculated stresses for the run and branch meet allowable stress values for both design and test conditions, with stress utilizations below 100%.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Internal Pressure Analysis Branch/Tee Acc. To EN 13480-3 (Edit. 2017)

    Uploaded by

    Domagoj Butumović
    56 views2 pages
    This document provides the results of an internal pressure analysis for a pipe branch/tee according to EN 13480-3. The analysis was conducted for a DN150.0/DN65.0 branch with input data including nominal diameters, material properties, design pressures and temperatures, outer diameters, wall thicknesses, and other dimensions. The results show the calculated stresses for the run and branch meet allowable stress values for both design and test conditions, with stress utilizations below 100%.

    Original Description:

    -

    Original Title

    Tee

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the results of an internal pressure analysis for a pipe branch/tee according to EN 13480-3. The analysis was conducted for a DN150.0/DN65.0 branch with input data including nominal diameters, material properties, design pressures and temperatures, outer diameters, wall thicknesses, and other dimensions. The results show the calculated stresses for the run and branch meet allowable stress values for both design and test conditions, with stress utilizations below 100%.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    56 views2 pages

    Internal Pressure Analysis Branch/Tee Acc. To EN 13480-3 (Edit. 2017)

    Uploaded by

    Domagoj Butumović
    This document provides the results of an internal pressure analysis for a pipe branch/tee according to EN 13480-3. The analysis was conducted for a DN150.0/DN65.0 branch with input data including nominal diameters, material properties, design pressures and temperatures, outer diameters, wall thicknesses, and other dimensions. The results show the calculated stresses for the run and branch meet allowable stress values for both design and test conditions, with stress utilizations below 100%.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Dimensions - Condensate_0

    Internal pressure analysis Branch/Tee acc. to EN 13480-3 (Edit. 2017)


    DN150.0/DN65.0

    Input data Run Branch


    Nom. diameter: DN150.0 DN65.0
    Material: 16MO3 16MO3
    Design pressure / temperature: 80.00 bar (g) / 400.00 °C
    Test pressure/temperature: 179.50 bar (g) / 20.00 °C

    Dimensions Run Branch


    Outer diameter Da / da: 168.30 mm 76.10 mm
    Wall thickn. e_ord_s / e_ord_b: 11.00 mm 5.00 mm
    Add. thickness c1: 12.50% 12.50%
    Add.thickness c0: 1.00 mm 1.00 mm
    Length: 150.32 mm 99.82 mm
    Effective width ls / length lb: 37.11 mm 15.67 mm

    Pressure application area Ap: 6518.82 mm²


    Stress area As: 402.06 mm²

    Allowable stresses run Design cond. Test cond.


    Allowable stresses: 104.00 N/mm² 266.00 N/mm²

    Allowable stresses branch Design cond. Test cond.


    Allowable stresses: 104.00 N/mm² 266.00 N/mm²

    Range of validity
    eab/eas <= 2.000 (di/Di = 0.459) 0.391 met
    di/Di <= 1.000 0.459 met
    phi <= 45.000° 0.000 met

    Results Design cond. Test cond.


    Analysis straight pipe - Run
    Calculated stress: 74.05 N/mm² 166.15 N/mm²
    Stress utilization: 71.20 % 62.46 %

    Analysis straight pipe - Branch


    Calculated stress: 86.19 N/mm² 193.39 N/mm²
    Stress utilization: 82.88 % 72.70 %

    1
    Calculation of allowable stresses
    +-----------------------------------------------------------------------+
    | EN 13480-3 Edit.2017 Material: 16MO3 Ferrite |
    |-----------------------------------------------------------------------|
    | Material: 16MO3 / 1.5415 |
    | Material properties Spec. Rev. |
    | --------------------------------------------------------------------- |
    | Young's modulus EN 13480 12/2014 |
    | Expansion coefficient EN 13480 12/2014 |
    | Tensile strength EN 10216-2 03/2014 |
    | 0.2% Yield strength EN 10216-2 03/2014 |
    | 1% Yield strength 10000h EN 10028-2 09/2009 |
    | 1% Yield strength 100000h EN 10028-2 09/2009 |
    | Creep rupture strength (mean) 10000h EN 10216-2 03/2014 |
    | Creep rupture strength (mean) 100000h EN 10216-2 03/2014 |
    | Creep rupture strength (mean) 200000h EN 10216-2 03/2014 |
    |-----------------------------------------------------------------------|
    | Temperature T °C | 400.00 | 20.00 | | | |
    | Y-mod\cold kN/mm^2 | 211.77 | 211.77 | | | |
    | Y-mod\hot kN/mm^2 | 182.60 | 211.77 | | | |
    |---------------------+---------+---------+---------+---------+---------|
    | wall thickness mm | 0 - 16| 0 - 16| | | |
    |---------------------+---------+---------+---------+---------+---------|
    | in N/mm^2 | | | | | |
    | Rm\RT\min | 450.00 | 450.00 | | | |
    | Rp0.2\RT\min | 280.00 | | | | |
    | Rp0.2\T\min | 156.00 | 280.00 | | | |
    | Rm\200000\mitt | 368.00 | | | | |
    | SFcr | 1.50 | | | | |
    |---------------------+---------+---------+---------+---------+---------|
    | Rm\RT\min/2.4 | 187.50 | | | | |
    | Rp0.2\T\min /1.5 | 104.00 | | | | |
    | Rm\200000\mitt/SFcr | 245.33 | | | | |
    | ff (5.2.1-1) | 104.00 | | | | |
    |---------------------+---------+---------+---------+---------+---------|
    | Rm\RT\min/3.0 | 150.00 | | | | |
    | Rp0.2\RT\min/1.5 | 186.67 | | | | |
    | fc | 150.00 | | | | |
    | fh | 104.00 | | | | |
    | fcr | -.- | | | | |
    |---------------------+---------+---------+---------+---------+---------|
    | 0.95*Rp0.2\T\min | | 266.00 | | | |
    | f_test | | 266.00 | | | |
    |---------------------+---------+---------+---------+---------+---------|
    | Y-mod\h / Y-mod\c | 1.00 | | | | |
    | fa1 = fa/U | 213.50 | | | | |
    | min(Rm\RT,2*Rp\T) | | | | | |
    | or 0.3*Rp\RT | 84.00 | | | | |
    +-----------------------------------------------------------------------+

    You might also like