Genelec Pro Monitoring Catalogue
Genelec Pro Monitoring Catalogue
Genelec Pro Monitoring Catalogue
ACTIVE CROSSOVER
Active crossover operating at low signal levels
OPTIMIZED AMPLIFIERS
Each transducer is driven by its own
optimized amplifier
PROTECTION CIRCUITRY
Sophisticated drive unit protection
circuitry for safe operation
Active Subwoofers....................22
Accessories..................36
The Long Lasting Experience
over the years, refined to products that have set the benchmark
parts for all products for at least five years, in many cases
4
5
The First Step to Professional Audio - 6010A & 5040A System
The Genelec 6010A is a very compact two-way active loudspeaker designed for computer sound systems and other
close proximity listening applications. Its small size, amazing sound quality and rugged construction make the 6010A an
ideal portable sound system for the traveling professional user and a constant source of enjoyment for active free time.
The Genelec 5040A is a very compact active subwoofer designed to complement up to five Genelec 6010A active
loudspeakers or a pair of the slightly bigger 6020A’s. The 5040A extends the system’s bass response down to 35 Hz
and integrates perfectly with the 6010A’s in any environment. The playback level for the whole system is conveniently
controlled by the remote volume control provided with the 5040A subwoofer. The 5040A is the winner of the 2009 Fennia
Prize Grand Prix design award, presented by Design Forum Finland and the Fennia Group.
6010A 5040A
Maximum sound pressure level 93 dB 1
Maximum sound pressure level3 98 dB
Frequency response 74-18000 Hz (± 2.5 dB) Frequency response 35-85/120 Hz (± 3 dB)
Drivers Bass 3'' + Treble 3/4'' metal dome + DCW™ Drivers 61/2'' Active
Amplifier power per channel Bass 12 W + Treble 12 W Amplifier power 40 W
Dimensions H x W x D 195 x 121 x 114 mm Dimensions Height x Diameter 251 x 305 mm
(711/16'' x 43/4'' x 41/2'') with Iso-Pod™ (97/8'' x 12'')
Weight 1.4 kg (3.1 lb) Weight 6.3 kg (13.9 lb)
Order code 6010AP (black), 6010AW (white), 6010AS (silver) Order code 5040APM (black), 5040AWM (white), 5040ASM (silver)
6 1) Maximum short term sine wave sound pressure level averaged from 100 Hz to 3 kHz, measured on axis in half space at 1 meter 3) Maximum short term sine wave sound pressure level averaged from 40 to 85 Hz, measured in half space at 1 meter
09
Active Two-Way Monitors
Typical applications of Genelec two-way active monitors include near-field monitoring in recording studios, broadcast
facilities, mastering suites, post-production houses, mobile production vehicles, project/home studios, audio and video
workstations, fixed installations and multichannel audio monitoring.
The outstanding 8000 MDE™ Series has introduced the Minimum Diffraction Enclosure™ with its rounded edges that
curve gently and seamlessly into the shape of the Advanced DCW™ waveguide and the rear-mounted reflex tube.
Made of die-cast aluminium, the 8000 Series enclosures offer excellent damping and sturdy structure, yet with thin walls
and maximised internal volume. The long, curved reflex tube is flow optimized to increase the woofer’s low frequency
extension and SPL capacity. New technology drivers combined with carefully designed filters provide improved resolution
and minimum listening fatigue over the entire audio spectrum. Every Genelec 8000 Series monitor comes with a rubber
based Iso-Pod™ (Isolation Positioner/Decoupler™) which prevents coloration caused by conduction of unwanted
vibration to the mounting surfaces. The Iso-Pod™ also features adjustable speaker tilt for precise aiming of the acoustical
axis. With all these technological advantages the 8000 Series provides an unmatched sound experience.
New for 2009 is the updated 8020B with a convenient and energy saving master power switch and a new fully white
colour version.
8000 Series Two-Way Active Monitors
8020B 8030A
Maximum sound pressure level 95 dB 1
Maximum sound pressure level1 100 dB
Frequency response 66-20000 Hz ± 2.5 dB Frequency response 58-20000 Hz ± 2.0 dB
Drivers Bass 4” + Treble 3/4”, metal dome + DCWTM Drivers Bass 5” + Treble 3/4”, metal dome + DCWTM
Amplifier power per channel Bass 20 W + Treble 20 W Amplifier power per channel Bass 40 W + Treble 40 W
Dimensions H x W x D 242 x 151 x 142 mm, Dimensions H x W x D 299 x 189 x 178 mm,
(91/2 x 6 x 55/8) with Iso-PodTM (1113/16 x 77/16 x 71/16”) with Iso-PodTM
Weight 3.7 kg (8.1 lb) Weight 5.6 kg (12.3 lb)
Order code 8020BP (black), 8020BS (silver), 8020BW (white), 8020BZ (polished alum.) Order code 8030AP (black), 8030AS (silver), 8030AW (white), 8030AZ (polished alum.)
10 1) Maximum short term sine wave sound pressure level averaged from 100 Hz to 3 kHz, measured on axis in half space at 1 meter
White
White Polished White Polished
aluminium aluminium
8040A 8050A
Maximum sound pressure level1 105 dB Maximum sound pressure level1 110 dB
Frequency response 48-20000 Hz ± 2.0 dB Frequency response 38-20000 Hz ± 2.0 dB
Drivers Bass 61/2” + Treble 3/4”, metal dome + DCWTM Drivers Bass 8” + Treble 1”, metal dome + DCWTM
Amplifier power per channel Bass 90 W + Treble 90 W Amplifier power per channel Bass 150 W + Treble 120 W
Dimensions H x W x D 365 x 237 x 223 mm, Dimensions H x W x D 452 x 286 x 278 mm,
(143/8 x 93/8 x 813/16”) with Iso-PodTM (1713/16 x 111/4 x 1015/16") with Iso-PodTM
Weight 8.6 kg (18.9 lb) Weight 12.7 kg (28 lb)
Order code 8040AP (black), 8040AW (white), 8040AZ (polished alum.) Order code 8050AP (black), 8050AW (white), 8050AZ (polished alum.)
11
8000 Series Features and Benefits Advanced Genelec DCW™
The revolutionary DCW™ has been further enhanced to provide extremely accurate control
“A monitoring loudspeaker shall reveal the truth about the program being monitored. It shall not add of the speaker’s directivity. This specially shaped and very smooth surface is integrated with
anything to nor remove or mask anything contained in the program. The monitoring system shall the enclosure and its area has been maximized to achieve an astoundingly flat on and off-axis
frequency response. It provides a wide and consistent listening window, minimizes harmful
be neutral in its reproduction, and the effects of its operating environment shall be minimized.” In
early room reflections and other colourations associated with conventional designs.
Genelec’s quest for this ultimate goal, the 8000 Series represents the culmination of almost 30 years
of experience. These pages are dedicated to highlighting some of the innovations incorporated in the
8000 Series loudspeakers and the 6010A active loudspeaker.
Genuine Genelec quality Low distortion drivers with sophisticated filtering technique
The Genelec name stands for accuracy, exceptional reliability and consistency. Since 1978 Genelec has The new technology drivers were designed in every detail for minimized distortion, smooth response
pioneered groundbreaking solutions in active monitoring. The calibrated controls allow precise balancing and reliability. The crossover filtering was carefully designed to complement each drive unit and to
of the response to differing acoustical conditions. Dedicated and matched very low distortion amplifiers, have a rapid and smooth transition between the drivers. Together with the MDE™ enclosure these
advanced driver protection and magnetic shielding are included as standard. improvements mean improved resolution and less listening fatigue over the entire audio spectrum.
12
The 1032A Active Two-Way Monitor
High performance reflex port design
Originally designed as a near field monitor, the 1032A can also be used for main
To increase the woofer’s low frequency extension and SPL
capacity, Genelec has designed an ingenious flow optimized monitoring in many situations due to its high output and extended frequency
reflex port. The long, curved tube maximizes airflow so deep response. It is magnetically shielded making it ideal for recording studios,
bass can be reproduced without compression. The tube broadcast monitoring, TV control rooms, mobile vans and CD/DVD mastering.
terminates with a wide flare, minimizing port noises and
providing excellent bass articulation.
1) Maximum short term sine wave sound pressure level averaged from 100 Hz to 3 kHz, measured on axis in half space at 1 meter 13
AutoCalTM DSP Monitoring Systems
dsp Since their introduction in 2006, Genelec’s 8200 and 7200 Series DSP monitoring systems with their GLM™ control
software have received glowing reviews from worldwide audio press and professional audio people alike. The
practicality of the independent control network and the carefully thought-out features and functions of the GLM™
software have been proven in the most demanding and prestigious applications, while the power of the AutoCal™
GLM calibration function has saved the day for many users having to work in an unfavourable acoustic environment.
The new 8260A three-way active monitor is the latest addition to the 8200 Series “hardware” line. Fully compatible
with other 8200 and 7200 Series DSP models, the 8260A presents the all-new Minimum Diffraction Coaxial™
(MDC™) treble/midrange driver perfectly matched with the large DCW™ waveguide. This breakthrough in coaxial
design provides improved imaging and overall sound quality on- and off-axis, extremely smooth frequency response
leading to outstanding clarity and definition of the inner details of the music. With its high SPL capacity and excellent
directivity characteristics, the 8260A is the ideal choice for mid sized monitoring rooms.
Compact and easy to set up and use, the Genelec SE™ (Small Environment) DSP loudspeaker system introduced
in 2007 offers the benefits of Genelec’s DSP technology to a wide range of new customers. At the heart of the
system is the SE7261A DSP subwoofer with DSP processing supporting eight channels of digital audio and
network control. The proprietary GLM.SE™ software kit includes a measurement microphone, AutoCal™ function
and other key features of the standard GLM software. The system setup is simple, as the 8130A digital input active
loudspeakers are not connected to the network but DSP processing is applied to the high-pass filtered output signal
at the subwoofer, allowing the 8130A’s to be aligned and adjusted to perfection.
Access to the benefits of Genelec’s DSP monitoring systems is made easy by the introduction of the AD9200
Analog to Digital converter. The AD9200 allows using the 7200 Series DSP subwoofers with analog signal sources,
bringing the full potential of Genelec’s DSP monitoring systems to all applications.
The 8200/7200 Series DSP Systems and SE™ (Small Environment) DSP
loudspeaker system are the winners of TEC Award for outstanding achievement
in professional audio product design in Studio Monitor Technology category in
2007 and 2008.
DSP/networked loudspeaker systems are not a new concept. Such technology is in regular use in
commercial installations around the world, such as large sound reinforcement venues. To bring this
Operating system supported Windows XP, Vista/Mac OS X 10.3.9 or later*
technology into a critical audio production environment requires first and foremost a solid foundation
Number of loudspeakers supported 30
to work from, and the 8000 Series provides the ideal platform. Number of audio channels supported 24 (AES/EBU single-wire),
12 (analog, AES/EBU dual-wire)
System calibration AutoCal™
The marriage of outstanding analog system performance with the breakthrough technologies of DSP,
Major components included GLM™ Network interface device
Genelec Loudspeaker Manager™ setup and installation software and AutoCal™, automated self- 8200A Calibration microphone and holder
calibration algorithm, allow those customers who require further refinement in their sound reproduction USB cable
to have the most advanced tools at their disposal. Measurement signal cable
Software CD
System Operating Manual
Order code 8200-601B
7200 Series DSP Subwoofers *Check current support from www.genelec.com
To complement the 8200 DSP two-way systems, Genelec has developed three robust DSP subwoofers. GLM™ Multiroom Expansion Kit
Built upon the proven LSE™ (Laminar Spiral Enclosure™) technology of our 7000 Series, the 7260A, Major components included GLM™ Network interface device
7270A and 7271A deliver the same articulate and precise low frequency reproduction. USB cable
Order code 8200-602
The 7200 subwoofers provide the cornerstone for those control room environments that are equipped
with fully digital monitor/buss outputs, with connectivity via their four AES/EBU digital inputs and
Backpanel of the 8240A Connector panel of the 7270A
outputs. All standard 7000 series functions are available when used in Stand Alone mode, and if
connected to the network through GLM™ software, additional powerful resources become available.
When coupled with AutoCal™, Genelec’s automated self-calibration algorithm, enhanced acoustic
integration is provided for every loudspeaker in virtually any control room environment.
These DSP systems are, by design, complex yet straightforward and easy to use, versatile in
configuration and adaptable acoustically to nearly any environment you place them in, to provide
outstanding clarity and definition with a naturalness that you can immediately trust. And with respect to
our customers most valuable asset – time, these systems are up and running quickly and effectively.
16
DSP Products
18 1) Maximum short term sine wave sound pressure level averaged from 100 Hz to 3 kHz, measured on axis in half space at 1 meter
7260A 7270A 7271A
Maximum sound pressure level2 108 dB Maximum sound pressure level2 112 dB Maximum sound pressure level2 118 dB
Frequency response 19-100 Hz ± 3 dB Frequency response 19-100 Hz ± 3 dB Frequency response 19-100 Hz ± 3 dB
Drivers 10” Drivers 12” Drivers 2 x 12”
Amplifier power 120 W Amplifier power 250 W Amplifier power 500 W
Dimensions H x W x D 527 x 462 x 363 mm Dimensions H x W x D 625 x 555 x 490 mm Dimensions H x W x D 755 x 803 x 490 mm
(203/4 x 183/16 x 145/16”) (245/8 x 217/8 x 195/16”) (293/4 x 315/8 x 195/16”)
Weight 27 kg (59 lb) Weight 51 kg (112 lb) Weight 82 kg (180 lb)
Recommended main monitors 8240A (stereo) Recommended main monitors 8250A (stereo) and 8240A (surround) Recommended main monitors 8260A (stereo) and 8250A (surround)
Order code 7260AP Order code 7270AP Order code 7271AP
2) Maximum short term sine wave sound pressure level averaged from 30 to 85 Hz, measured in half space at 1 meter 19
Genelec SE™ Small Environment DSP System
-AutoPhase feature for perfect subwoofer integration 8200A Calibration microphone and holder
USB cable
Measurement signal cable
The SE7261A loudspeaker output processing for the eight output channels each have: Software CD
-High-pass filtering System Operating Manual
Order code 8200-501B
-Two notch filters
*Check current support from www.genelec.com
-Time of flight compensation
-Level alignment
Backpanel of the 8130A Connector panel of the SE7261A
-Video display delay compensation
New Genelec Loudspeaker Manager for the SE™ system, GLM.SE™ software, provides a familiar
graphical user interface, speeding users through system setup and fully automated AutoCal™
acoustic system calibration. It also provides an efficient working environment for professionals with
system setup file support and efficient tools for evaluating audio content. Video editing suites, mobile
production trucks, personal music studios and broadcast control rooms all gain control of their
monitoring environment with the Genelec SE™ DSP System.
20
AD9200A Analog to Digital Converter
1) Maximum short term sine wave sound pressure level averaged from 100 Hz to 3 kHz, measured on axis in half space at 1 meter 2) Maximum short term sine wave sound pressure level averaged from 30 to 85 Hz, measured in half space at 1 meter 21
Active Subwoofers
With Genelec Active Subwoofers you can extend the low frequency response of your main monitors in stereo and
surround sound applications. The 7050B can handle 5.1 monitoring with the 8020B, and the larger subwoofers
feature Genelec’s proprietary 6.1 bass management system, which also allows linking several subwoofers
together with a summed output signal. The dedicated LFE input can be configured for different LFE reproduction
bandwidths in all models. The 7050B, 7060B, 7070A and 7071A utilize Genelec’s patented LSE™ (Laminar
Spiral Enclosure™) technology. The spiral-shaped design yields an extremely rigid enclosure while forming the
subwoofer’s integral reflex port. The flow-optimized design provides an extended LF capacity, low distortion and
precise bass articulation. In the 7073A flagship subwoofer, the proprietary and innovative reflex tube is housed
in a rugged enclosure particularly suited for flush mounting.
7000 Series Active Subwoofers
7050B 7060B
Maximum sound pressure level 2
100 dB Maximum sound pressure level2 108 dB
Frequency response 25-85 Hz ± 3 dB Frequency response 19-85 Hz ± 3 dB
Drivers 8” Drivers 10”
Amplifier power 70 W Amplifier power 120 W
Dimensions H x W x D 410 x 350 x 319 mm (161/8 x 133/4 x 129/16”) Dimensions H x W x D 527 x 462 x 363 mm (203/4 x 183/16 x 145/16”)
Weight 18 kg (39.6 lb) Weight 28 kg (62 lb)
Recommended main monitors 8030A stereo and 8020B surround Recommended main monitors 8040A stereo and 8030A surround
Order code 7050BP Order code 7060BP
24 2) Maximum short term sine wave sound pressure level averaged from 30 to 85 Hz, measured in half space at 1 meter
7070A 7071A
Maximum sound pressure level
2
112 dB Maximum sound pressure level2 118 dB
Frequency response 19-85 Hz ± 3 dB Frequency response 19-85 Hz ± 3 dB
Drivers 12” Drivers 2 x 12”
Amplifier power 250 W Amplifier power 500 W
Dimensions H x W x D 625 x 555 x 490 mm (245/8 x 217/8 x 195/16”) Dimensions H x W x D 755 x 803 x 490 mm (293/4 x 315/8 x 195/16”)
Weight 50 kg (110 lb) Weight 81 kg (178 lb)
Recommended main monitors 8050A stereo and 8040A surround Recommended main monitors 1037C, 1038CF, 1038B stereo and 1032A, 8050A surround
Order code 7070AP Order code 7071AP
25
7073A
Maximum sound pressure level2 124 dB
Frequency response 19-85 Hz ± 3 dB
Drivers 4 x 12”
Amplifier power 1000 W
Dimensions H x W x D 524 x 1440 x 558 mm (205/8 x 5611/16 x 22”)
Weight 120 kg (265 lb)
Recommended main monitors 1034B stereo and 1038CF, 1038B surround
Order code 7073AP
26 2) Maximum short term sine wave sound pressure level averaged from 30 to 85 Hz, measured in half space at 1 meter
Stereo and Surround Sound Environments
Creating a balanced surround sound monitoring environment calls for matched monitors and
subwoofers. The Genelec 8000 MDE™ Series active monitors have their perfect match with the
Genelec LSE™ Subwoofers. To scale the system optimally for your space and SPL requirements,
please visit our website www.genelec.com* for recommended system setups. Here are some
examples of Genelec surround sets for small and medium mixing environments. 2 x 8020B + 7050B = TriPak™
www.genelec.com/learning-center/suggested-system-setups
2 x 8030A + 7050B = TriplePlay™ 2 x 8130A + SE7261 + GLM.SE™ = Digital TriplePlay™ 5 x 8020B + 7050B = 8020B SurroundPak
5 x 8130A + SE7261 + GLM.SE™ = Digital PowerPak™ 5 x 8040A + 7070A = 8040A SurroundPak 5 x 8250A + 7271A + GLM™ = 8250A DSP Surround Set
Active Three-Way and Main Monitors
The 1037C and the 1038B are magnetically shielded three-way monitoring systems for moderate sized control
rooms. Due to their broad bandwidth and high output, they are ideal for music recording, surround sound
monitoring, DVD mastering, broadcasting studios, editing suites and drama studios. Although designed to be
used free standing, they perform even better when flush mounted.
The new 1038CF is optimized for applications where a subwoofer is used. Its compact cabinet is easy to place
and the full-size DCW maintains consistent directivity even in medium sized rooms.
The 1038BC is a magnetically shielded compact center channel version of the 1038B monitor delivered with
a separate rack-mounted amplifier unit as standard. It is designed to be used with a pair of 1038B’s in three
channel (LCR) set-up and in surround systems where space near the video monitor or screen is limited. The
1038BC can also be oriented vertically for installations where horizontal space is limited.
The 1034B is the optimal main monitor for medium sized control rooms or where there is little space available for
flush mounting in the front wall. It is also used in CD and DVD mastering, sound stages and LCR and surround
sound installations. The dedicated, magnetically shielded center channel version 1034BC offers a slim solution,
as space near the video monitor or screen may be insufficient for a standard 1034B.
The flush mounted 1039A, the classic 1035B and the flagship 1036A are optimal for large control rooms where
wide bandwidth and high to extremely high SPL are required with lowest possible distortion.
Active Three-Way Monitors
1038BC 1037C
Maximum sound pressure level1 120 dB Maximum sound pressure level1 116 dB
Frequency response 35-20000 Hz ± 2.5 dB Frequency response 37-21000 Hz ± 2.5 dB
Drivers Bass 2 x 10” + Midrange 5” + Treble 1” metal dome + DCWTM Drivers Bass 12” + Midrange 5” + Treble 1” metal dome + DCWTM
Amplifier power per channel Bass 2 x 200 W + Midrange 120 W + Treble 120 W Amplifier power per channel Bass 180 W + Midrange 120 W + Treble 120 W
Speaker dimensions H x W x D 350 x 950 x 453 mm (133/4 x 373/8 x 177/8”) Speaker dimensions H x W x D 680 x 400 x 380 mm (263/4 x 153/4 x 1415/16”)
Amplifier dimensions H x W x D 530 x 480 x 113 mm (207/8 x 187/8 x 47/16”)
Speaker weight 60 kg (130 lb) Speaker weight 37 kg (82 lb)
Amplifier weight 14 kg (31 lb)
Order code* 1038BCE-VL, 1038BCE-VR, 1038BCE-HU, 1038BCE-HD Order code* 1037CE, 1037CP
30 1) Maximum short term sine wave sound pressure level averaged from 100 Hz to 3 kHz, measured on axis in half space at 1 meter * See page 38 for monitor orientation
1038B 1038CF
Maximum sound pressure level1 120 dB Maximum sound pressure level1 118 dB
Frequency response 35-20000 Hz ± 2.5 dB Frequency response 57-20000 Hz ± 2.5 dB
Drivers Bass 15” + Midrange 5” + Treble 1” metal dome + DCWTM Drivers Bass 2 x 8” + Midrange 5” + Treble 1” metal dome + DCWTM
Amplifier power per channel Bass 400 W + Midrange 120 W + Treble 120 W Amplifier power per channel Bass 180 W + Midrange 120 W + Treble 120 W
Speaker dimensions H x W x D 810 x 480 x 420 mm (317/8 x 187/8 x 169/16”) Speaker dimensions H x W x D 610 x 470 x 235 mm (24 x 18½ x 91/4”)
1034B 1034BC
Maximum sound pressure level1 123 dB Maximum sound pressure level1 123 dB
Frequency response 33-20000 Hz ± 2.5 dB Frequency response 33-20000 Hz ± 2.5 dB
Drivers Bass 2 x 12” + Midrange 5” + Treble 1” metal dome + DCWTM Drivers Bass 2 x 12” + Midrange 5” + Treble 1” metal dome + DCWTM
Amplifier power per channel Bass 2 x 400 W + Midrange 350 W + Treble 120 W Amplifier power per channel Bass 2 x 400 W + Midrange 350 W + Treble 120 W
Speaker dimensions H x W x D 700 x 890 x 383 mm (279/16 x 35 x 151/16”) Speaker dimensions H x W x D 489 x 1210 x 412 mm (191/4 x 475/8 x 161/4”)
Amplifier dimensions H x W x D 310 x 483 x 250 mm (123/16 x 19 x 913/16”) Amplifier dimensions H x W x D 310 x 483 x 250 mm (123/16 x 19 x 913/16”)
Speaker weight 73 kg (161 lb) Speaker weight 84 kg (185 lb)
Amplifier weight 30 kg (66 lb) Amplifier weight 30 kg (66 lb)
Order code* 1034BE-VU, 1034BE-VD, 1034BE-HL, 1034BE-HR Order code* 1034BCE-VL, 1034BCE-VR, 1034BCE-HU, 1034BCE-HD
1) Maximum short term sine wave sound pressure level averaged from 100 Hz to 3 kHz, measured on axis in half space at 1 meter * See page 38 for monitor orientation
1039A 1035B
Maximum sound pressure level1 126 dB Maximum sound pressure level1 131 dB
Frequency response 31-20000 Hz ± 2.5 dB Frequency response 30-20000 Hz ± 2.5 dB
Drivers Bass 2 x 15” + Midrange 5” + Treble 1” metal dome + DCWTM Drivers Bass 2 x 15” + Midrange 2 x 5” + 1” compression driver + DCWTM
Amplifier power per channel Bass 2 x 400 W + Midrange 350 W + Treble 120 W Amplifier power per channel Bass 2 x 1100 W + Midrange 600 W + Treble 300 W
Speaker dimensions H x W x D 820 x 1050 x 550 mm (325/16 x 415/16 x 215/8”) Speaker dimensions H x W x D 820 x 1105 x 775 mm (325/16 x 431/2 x 301/2”)
Amplifier dimensions H x W x D 310 x 483 x 250 mm (123/16 x 19 x 913/16”) Amplifier dimensions H x W x D 755 x 483 x 370 mm (293/4 x 19 x 149/16”)
Speaker weight 115 kg (253 lb) Speaker weight 142 kg (313 lb)
Amplifier weight 30 kg (66 lb) Amplifier weight 71 kg (156 lb)
Order code* 1039AE-VU, 1039AE-VD, 1039AE-HL, 1039AE-HR Order code* 1035BE-VU, 1035BE-VD, 1035BE-HL, 1035BE-HR
34 1) Maximum short term sine wave sound pressure level averaged from 100 Hz to 3 kHz, measured on axis in half space at 1 meter * See page 38 for monitor orientation
the neutral sound reproduction characteristic of all Genelec three-way and main monitors.
Introduced in 1989, the Genelec 5” proprietary midrange driver is a key component in
1036A
Maximum sound pressure level1 131 dB
Frequency response 21-20000 Hz ± 2.5 dB
Drivers Bass 2 x 18” + Midrange 2 x 5” + 1” compression driver + DCWTM
Amplifier power per channel Bass 2 x 1100 W + Midrange 600 W + Treble 300 W
Speaker dimensions H x W x D 960 x 1180 x 650 mm (373/4 x 461/2 x 255/8”)
Amplifier dimensions H x W x D 755 x 483 x 370 mm (293/4 x 19 x 149/16”)
Speaker weight 182 kg (401 lb)
Amplifier weight 71 kg (156 lb)
Order code* 1036AE-VU, 1036AE-VD, 1036AE-HL, 1036AE-HR
Accessories
This page shows some samples of the wide Genelec Accessories range. Versatile mounting options Wall bracket - black and white Truss mount kit Ceiling mount
8000-402-B and 8000-402-W 8000-417B 8000-415B
and carrying bags for the 8000 and 8200 Series, control units for subwoofers, magnetic shielding kits For all 8000 series models. For all 8000 series models. For all 8000 series models.
Clamp for 50 mm tube, length 365 mm. Length 905-1505 mm.
and protective grilles for large models and many more practical accessories are comprehensively
listed on the web pages of the corresponding products.
Floor stand
8000-409B Adjustable height table stand Soft carrying bag
Floor stand for 8020B-8050A. 8000-425B 8020-421, 8030-421, 8040-420, 8050-420 Stand plate for Iso-Pod
H 895-1370mm. Corresponding 80X0-408 required. Fixed table stand for 8020B and 8030A. 8050A bag is for a single loudspeaker, all others for a pair. 8020-408, 8030-408, 8040-408 and 8050-408
Main monitor enclosure and DCWTM orientation codes
Each main monitor should be ordered with appropriate enclosure and DCWTM orientation.
Each product has multiple order code extensions that specify (V) for vertical enclosure or
(H) horizontal, with the DCWTM (U) up or (D) down, (L) left or (R) right. For 1038BC and
1034BC, (L) and (R) stand for ports left or ports right.
Always remember to check the required speaker-amplifier cable length. Default factory
cable length is 10 m, other lengths available as an option.
1034BCM-HU
International enquiries:
Genelec Oy,
Olvitie 5, FI-74100 Iisalmi, Finland
T +358 17 83 881
F +358 17 81 2267
Email: genelec@genelec.com
In the USA:
Genelec, Inc.,
7 Tech Circle, Natick, MA 01760, USA
T +1 508 652 0900
F +1 508 652 0909
Email: genelec.usa@genelec.com
1036A-VU 1036A-VD
In Sweden:
Genelec Sverige,
Box 5521, S-141 05 Huddinge, Sweden
T +46 8 449 5220
F +46 8 708 7071
Email: info@genelec.com
In China:
Beijing Genelec Audio Co. Ltd.
Jianwai SOHO, Tower 12, Room 2605
39 East 3rd Ring Road, Chaoyang District
Beijing 100022, China
T: +86 10 5869 7915
1036A-HL 1036A-HR F: +86 10 5869 7914
Email: genelec.china@genelec.com
professional monitoring systems
community.genelec.com
Genelec Document BBAGE062a. Copyright Genelec Oy 08.2009. All data subject to change.