SA-1 Assignment

ASSIGNMENT - 5
QUESTION - 1
A beam of 6m. long is fixed at A & simply supported at B. it carries a UDL of
50KN/m in the middle third of the beam. draw the SFD & BMD of the given
beam.
SOLUTION:
 Support at B is removed
=>Ra=100KN
 The deflection at B=moment of M/EI diagram about B
= (1/2*200*2*16/3+100*2*5+1/3*100*2*7/2)
*1/EI
=2300/EI
 Rb is considered.
Deflection at B=(6*Rb*6/2*2*6/3)/EI
 Both the deflections are same.
By equating 2 & 3 we get
Rb=31.94KN
=>Ra=100-31.94
=68.06KN
Ma=31.94*6-100*3=-108.36KN.m
Mb=0
Mc=31.94*4-100=27.76KNm
Md=31.94*2=63.88KNm
 With the computed data SFD & BMD of given beam is drawn.
QUESTION - 2
A Propped cantilever AB of span 4m. hinged at A & fixed at B is loaded with
a UDL of 10KN/m throughout the span. Find the support reactions, draw
SFD BMD.
SOLUTION:
 The support at A is removed.
Rb=40KN
 The deflection at A =the moment of M/EI diagram about A
=1/3*4*80*3*1/EI
=320/EI
 Ra is considered.
The deflection at A=1/2*4*4Ra*2.67*1/EI
=534Ra/25EI
 Both deflections are same.
By equating 2 & 3
Ra=15KN
Rb=25KN
MB=15*4-40*2=-20KNm
MC=15*2-20=10KNm
 With the computed data SFD BMD of the given beam is drawn.
QUESTION - 3
A cantilever beam has a rigid support 10mm below free end. Analysis this
beam if two-point loads of 40KN & 60KN are acting at a distance of 2m &
4m respectively from free end. EI=150000KNm 2
SOLUTION:
The rigid support is 10mm below free end means the beam is sinking.
EI*0.01=-1500
=>A1X1+A2X2=-1500
=>(1/2*6RB*6*4) -(1/2*120*2) -(1/2*200*2*10/3) -(2*120*5) =-1500
=>72RB=-1500+8000/3
=>RB=16.20KN
=>RA=83.80KN
MA=16.20*6-60*4-40*2=-222.8KNm
MC=16.20*4-60*2=-55.2KNm
MD=16.20*2=32.4KNm
The SFD BMD Are drawn from the computed data.
QUESTION - 4
A cantilever beam AB of span 4m is supported by a 2m long 3mm diameter
wire CB. Determine the force developed in the wire if an UDL of 20KN/m
acts at a distance 3m from fixed end. Assume EI=5000KNm 2 for beam &
E=200KN/m2 for wire.
SOLUTION:
LET
Deflection due to external load =X
Deflection due to developed force =X1
Deflection due to propped reaction=X2
X=X1+X2
X=1/3*3*90/EI*3.25
=292.5/EI
=0.0585KNm ----------------------------------------------------------------------1
X1=PL/AE A=Pi/4*0.003 2=7.068*10-6 m2
=1.414*10-3P ----------------------------------------------------------------------2
X2=PL3/3EI
=4.266*10-3P --------------------------------------------------------------------3
From the computed data
=>0.0585=5.68*10-3P
=>P=10.29KN
QUESTION - 5
The free end B of a cantilever beam AB of span 3m rests over another free
end of cantilever beam BC of span 2m. if 60KN load acts on beam AB at
2m from fixed end. Find the reaction at fixed ends A & C. assume
EIAB=EIBC/2
SOLUTION:
1.Considering only AB not resting on BC
Deflection= X= [1/2*120*2*(2/3*2+1)] *1/EI
=280/EI
2.considering Rb, now the deflection be X2
X2=(1/2*3Rb*3*2) *1/EI
3.Now the downward force on BC to kept it in position
X1=(1/2*2Rb*2/3*2*2)/(EI/2)
=16Rb/3EI
X=X1+X2
=>Rb=19.54KN
MA=19.54*3-60*2=-61.38KN
RC=19.54KN
RA=40.46KN
MC=19.54*2=39.08KN
QUESTION - 6
Analysis the fixed beam of span 8m.an UDL of 2KN/m acts on it at a
distance 4m from the left end.
SOLUTION:
 Equation on area
(1/2*8Rb*8)-8Mb-(1/3*16*4) =0
=>32Rb-8Mb=64/3
 Equation on CG
32Rb*16/3-8Mb*4=64/3*7
=>512/4Rb-32Mb=448/3
 By solving 1 & 2
Rb=1.5KN
Ra=6.5KN
Mb=-3.34KNm
Ma=-3.34+1.5*8-8*2=-7.33KNm
SFD BMD are drawn with the computed data
 Point of maximum BM
X/6.5=4-X/1.5
=>X=3.25m from A
BMmax=-7.33+6.5*3.25-2*3.252/2
=3.23KNm
 Point of contraflexure
2.67/x=3.34/4-x
=>x=1.78m
QUESTION - 7
Analyze the shown beam.
SOLUTION:
1.equation on area
½*8RB*8-MB*8-½*4*40-1/3*6*36=0
=>32RB-8MB=152
 Equation on CG
512/3RB-32MB=3004/3
 By solving
RB=9.24KN
MB=-17.96KNm
RA=12.76KN
MA=-20.04KNm
MC=15KNm
MD=0.52KNm
From the computed data SFD BMD are drawn.

QUESTION - 8
Calculate the fixed end moments of the given beam.
SOLUTION:
1.Equation of area
RB/2*(a+b)2-(a+b) *MB-M*a=0
2.Equation of CG
RB/3*(a+b)3-MB/2*(a+b)2-M*a/2*(a+2b) =0
 By solving
 RB=6Mab/(a+b)3
Ra=-6Mab/(a+b)3
MB=[3Mab-Ma(a+b)]/(a+b)2
MA=-MB
QUESTION – 9
A fixed beam AB of length 6m carries point load of 160KN & 120KN at a
distance of 2m & 4m from the left end. Find the fixed end moments & the
reaction at the supports. Draw SFD & BMD.
SOLUTION:
(1/2*6RB*6)-6*MB-1/2*560*2-2*240=0
=>18RB-6MB=1280
 Equation on CG
18RB*4-6MB*3-240*10/3-560*16/3-480*5=0
=>72RB-18MB=18500/3
 By solving
RB=130.37KN
MB=-177.77KNm
RA=149.63KN
MA=-195.55KNm
MC=103.71KNm
MD=82.97KNm
From the computed data SFD BMD are drawn
QUESTION - 10
A nonprismatic beam AB with both ends fixed is subjected to a
concentrated load of 300KN as shown. Determine the fixed end moments.
EI=4000KN-m2
SOLUTION:
63/2RB+18RB+9/2RB-3MB-3MB-3MB=4725
=>54RB-9MB=4725
 Equation on CG
459RB-54MB=48600
 By solving
RB=150KN
MB=375KN
RA=150KN
MA=375KN
From the computed data SFD BMD are drawn.
QUESTION - 11
Analysis the fixed beam as shown.
SOLUTION:
½*12RB*12-12*MB=6300
=>72RB-12MB=6300
 Equation on CG
576RB-72MB=59400
 BY solving 1 & 2
RB=150KN
RA=150KN
MB=375KN
MA=375KN
SFD BMD Are drawn from the computed data.

SA-1 Assignment

Uploaded by

Copyright:

Available Formats

SA-1 Assignment

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SA-1 Assignment

Uploaded by

Copyright:

Available Formats

ASSIGNMENT - 5

From the computed data SFD BMD are drawn.

You might also like