Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 180 views

    Thyssenkrupp Elevator: Stage 1 B

    Uploaded by

    gajendrabanshiwal8905
    The document is a machine checklist for stage 1 of an elevator installation project. It lists 16 items to be checked, including that the machine beams are level and supported properly, tie down bolts are clear, pulleys are plumb and parallel, and sheave and pulley centers align with car rails within specified tolerances. The checklist is to be signed off by the contractor, engineer, and quality assurance inspector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Thyssenkrupp Elevator: Stage 1 B

    Uploaded by

    gajendrabanshiwal8905
    180 views3 pages
    The document is a machine checklist for stage 1 of an elevator installation project. It lists 16 items to be checked, including that the machine beams are level and supported properly, tie down bolts are clear, pulleys are plumb and parallel, and sheave and pulley centers align with car rails within specified tolerances. The checklist is to be signed off by the contractor, engineer, and quality assurance inspector.

    Original Description:

    Machine

    Original Title

    16 Machine

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is a machine checklist for stage 1 of an elevator installation project. It lists 16 items to be checked, including that the machine beams are level and supported properly, tie down bolts are clear, pulleys are plumb and parallel, and sheave and pulley centers align with car rails within specified tolerances. The checklist is to be signed off by the contractor, engineer, and quality assurance inspector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    180 views3 pages

    Thyssenkrupp Elevator: Stage 1 B

    Uploaded by

    gajendrabanshiwal8905
    The document is a machine checklist for stage 1 of an elevator installation project. It lists 16 items to be checked, including that the machine beams are level and supported properly, tie down bolts are clear, pulleys are plumb and parallel, and sheave and pulley centers align with car rails within specified tolerances. The checklist is to be signed off by the contractor, engineer, and quality assurance inspector.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3
    At a glance
    Powered by AI
    The document appears to be a checklist for inspecting elevator machine room components and ensuring measurements and placements meet specifications.

    Items being checked include center lines of rails, positions of sheaves and pulleys, levelness, grouting, cutouts, supports and more as per the layout drawing.

    Tolerances specified are +/- 1mm for plumbness of sheave and pulley, +/- 2mm for levelness of machine beams, and +/- 3mm for front to back tolerance of center lines.

    Date :

    ThyssenKrupp Elevator STAGE 1 B


    ( India ) Machine checklist Job No.

    Lay-out Drg. No.


    PROJECT NAME :
    Wing No. / Lift No.

    Main Traction Sheave As per GAD Actual at site

    S ……..mm S ……..mm
    T ……..mm T ……..mm
    R ……..mm R ……..mm

    R machine beams

    Deflector Pulley
    S T RCC block

    Ropes
    m/c room bottom RCC slab

    As per GAD Actual at site


    CTC
    CTC ( E & F ) = CTC = E = ..……..mm,
    …...……..mm CTC = F = ..……..mm,

    Point
    No. Items to be checked. Y N
    1 Machine beam grouting as per GAD.
    2 Machine beams are in level. ( Tolerance is +/- 2 mm.)
    3 Machine beams are supported for more than 150mm at both the ends in RCC block or in rear wall
    4 Sockle of machine foundation RCC block is as per GAD. Plastering is done neatly.
    5 Tie down bolts are clear in machine holes from all the sides.
    6 Position of rubber pads is as per GAD.
    7 Position of kick angles is as per GAD. Fixed properly.
    8 Main rope cutouts are finished and raised up nearly by 50mm above m/c room floor slab
    9 Deflector pulley cab be easily removable in future for maintenance purpose.
    10 Main sheave is in plumb. ( Tolerance is +/- 1 mm.)
    11 Deflector pulley is in plumb.( Tolerance is +/- 1 mm.)
    12 Deflector pulley is parallel to main sheave.
    13 Centers of main sheave and deflector pulley is in one line.
    14 Car rail center is matching with main sheave center.
    CWT rail center is matching with deflector rail center. ( Left to right tolerance is only 1mm )
    15
    ( Front to back tolerance is +/- 3mm.)
    16 Standing in front of controller, rotation of the main traction sheave can be seen easily.

    Name & signature of Contracor with Name & signature of NI Engineer Name & signature of FQA-in-charge
    Date with Date with Date
    Doc.No. : 0095OP999901360 Page 25

    You might also like