Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    I. Data: Design of Slab 0.025: M (Max. Dia Is 1/8 TH of Slab THK.)

    Uploaded by

    Latha Yerur
    1. The document describes the design of a reinforced concrete slab with a clear span of 4 meters and depth of 250 mm. 2. The effective depth of the slab is calculated as 212 mm. With a live load of 0.75 t/sqm, the total load on the slab is calculated as 1.875 t/sqm. 3. The maximum bending moment at the center of the effective span is calculated as 4.16 tm. The required area of steel reinforcement is calculated as 11.596 sqcm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    I. Data: Design of Slab 0.025: M (Max. Dia Is 1/8 TH of Slab THK.)

    Uploaded by

    Latha Yerur
    62 views5 pages
    1. The document describes the design of a reinforced concrete slab with a clear span of 4 meters and depth of 250 mm. 2. The effective depth of the slab is calculated as 212 mm. With a live load of 0.75 t/sqm, the total load on the slab is calculated as 1.875 t/sqm. 3. The maximum bending moment at the center of the effective span is calculated as 4.16 tm. The required area of steel reinforcement is calculated as 11.596 sqcm.

    Original Title

    3 2.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document describes the design of a reinforced concrete slab with a clear span of 4 meters and depth of 250 mm. 2. The effective depth of the slab is calculated as 212 mm. With a live load of 0.75 t/sqm, the total load on the slab is calculated as 1.875 t/sqm. 3. The maximum bending moment at the center of the effective span is calculated as 4.16 tm. The required area of steel reinforcement is calculated as 11.596 sqcm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    62 views5 pages

    I. Data: Design of Slab 0.025: M (Max. Dia Is 1/8 TH of Slab THK.)

    Uploaded by

    Latha Yerur
    1. The document describes the design of a reinforced concrete slab with a clear span of 4 meters and depth of 250 mm. 2. The effective depth of the slab is calculated as 212 mm. With a live load of 0.75 t/sqm, the total load on the slab is calculated as 1.875 t/sqm. 3. The maximum bending moment at the center of the effective span is calculated as 4.16 tm. The required area of steel reinforcement is calculated as 11.596 sqcm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    DESIGN OF SLAB 0.

    025
    I. Data:
    1 Clear Span : 4000 mm 4.000 m
    2 Depth of slab 250 mm 0.250 m
    3 Clear Cover : 30 mm 0.030 m
    4 Dia of Rein. 16 mm 0.016 m (Max. dia is 1/8 th of slab thk.)
    5 Width of bearing : 500 mm 0.500 m
    6 Unit wt of RCC 2.5
    7 Unit wt. Of CC 2.4
    8 Grade of Concrete M20

    II. Design Constants:


    1 Permissible Stress in Concete (c) : 70 kg/sqm
    2 Permissible stress in Steel (t): 1900 Kg/sqm
    3 Modular ratio (m) : 13.33
    4
    k= 1
    1 + t
    mc

    = 1
    1 + 1900 = 0.329
    13.33 x 70

    j= 1- k/3
    = 1 - 0.329 / 3 = 0.890

    Q= 0.5 c j k
    = 0.5 x 70 x 0.8902 x 0.329 = 10.262

    III. Design of RCC slab for operating plat form


    1. Effective depth d = 250 - 30 - 8
    = 212 mm or 0.212 m
    2. Effective Span :
    1 Clear Span +Effective depth = 4.00 + 0.212 = 4.212 m
    2 Clear Span + C/C bearings = 4.00 + 0.50 = 4.50 m

    Effective span is least of the above.


    Effecive Span = 4.212 m

    3. Assume Live Load = 0.75 t/sqm

    4. Loads :
    I).Self Wt. Of slab = 0.25 x 2.5 = 0.625 t /sqm
    ii) Load from shuttering = = 0.500

    SLAB Page 1
    iii) Live load = 0.750 "
    Total = 1.875 "
    5 Bending Moment:
    As per IS : 456-2000
    Max. Span Moment in the end span at the centre of span =
    = wl2 /8 = 1.875 x 4.212 x 4.212 = 4.16 tm
    8
    6 Check for Section : =
    Max. Moment 4.158 tm

    Eff. Depth required = M


    Qb

    = 4.158 x 105 = 20.1 cm


    10.26 x 100

    against the provided depth = 21.2 cm


    Hence Ok

    7 Area of Steel at centre of span = M


    tjd

    = 4.158 x 105
    1900 x 0.89 x 21.2

    = 11.596 Sq.cm

    Min. reinforcement as per IS:3370 Part II

    0.160%
    0.240%

    100 Thk. 450 Thk

    For 250 Thk.

    % steel = 0.16% + 0.08% x ( 450 - 250 )


    350
    = 0.206 %

    SLAB Page 2
    Min. Area of steel required = 0.206 x 100 x 25
    100
    = 5.143 sqcm
    Hence provide reinforcement = 11.596 sqcm

    Provide 16 dia bars at


    Area of each bar = 3.14 x 16 x 16 / 4
    = 201 sqmm
    = 2.010 Sqcm

    Spacing required = 100 x 2.010 = 17.3 cm C/C


    11.596

    Max. spacing a) 300 mm


    b) 3 times eff.depth = 3 x 212 = 636 mm
    Least of the above
    Hence provide 16 dia bars at 150 mm C/C

    Ast provided is = 1000 x 2.0096 = 13.4 Sqcm


    150
    8 Distribution Reinforcement:
    Ast = 0.12% of cross sectional Area
    = 0.12 x 100 x 25 = 3 Sqcm
    100
    Provide 10 dia bars
    Area of each bar = 3.14 x 10 x 10 / 4
    = 78.5 sqmm
    = 0.785 Sqcm

    Spacing required = 100 x 0.785 = 26.17 cm C/C


    3

    Hence provide 10 dia bars at 250 c/c

    9 Check for Shear:


    w = 1.875 t/sqm
    Max. Shear Force V = 1.875 x 4 = 3.75 t
    2

    Max. Shear Stress (q) = V


    b d
    = 3.75 x 1000 = 1.769 kg/sqcm
    100 x 21.2

    SLAB Page 3
    Allowable Max, Shear stress as per B-5.2.3.1 Table 24 of IS 456-2000
    for slabs 'q' value should not exceed half the value in Table.24
    = 0.5 x 18 = 9 Kg/sqcm
    Hence O.K

    % of steel = 100 As / bd
    = 100 x 13.40 = 0.632
    100 21.2
    Permissble Shear Stress as per Table 23 of IS:456-2000 P-84

    100 As/bd for M20

    0.50 0.30
    0.75 0.35
    0.25 0.05
    for 0.632 %
    = 0.3 + 0.05 ( 0.632 - 0.50 )
    0.25
    = 0.326 N/sq mm
    = 3.264 Kg/Sqcm
    For solid slabs as per B-5.2.1.1
    ' k' value for depth of slab 250 mm = 1.1
    Hence, permissible shear stress is = 1.1 x 3.264
    = 3.59 kg / sqcm
    Shear reinforcements Vs = 3.75 - 7.611 = -3.86 t

    Shear taken by bentup bars = 2.010 x 1900 Sin 45 x 2.22


    = 6001 Kgs
    = 6.001 t > -3.86 t
    Hence O K

    SLAB Page 4
    10 Bond Stress :

    Sum of perimeters (∑O)= 1000 x 3.14 x 16


    150
    = 334.9 mm or 33.49 cm
    Tbd = V = 3.75 x 1000 = 5.28 kg/sqcm
    ∑O d 33.49 x 21.2

    Permissible bond stress as per Table 21 of IS: 456 & B-2.1.2


    = 1.6 x 1.25 x 0.8
    = 1.60 N/sqmm
    = 16 kg/sqcm

    Hence, O.K

    SLAB Page 5

    You might also like