This document provides a declaration of performance for a thermal insulation product intended for use in buildings. It lists the manufacturer, standards used for assessment and verification of constancy of performance (AVCP), essential characteristics, and corresponding performance levels for the product. Key characteristics include reaction to fire class B-S2-d0 for thicknesses over 40mm, thermal resistance ranging from 1.15 to 6.15 m2K/W depending on thickness, thickness range of 30-160mm, and dimensional stability under heat and humidity.
This document provides a declaration of performance for a thermal insulation product intended for use in buildings. It lists the manufacturer, standards used for assessment and verification of constancy of performance (AVCP), essential characteristics, and corresponding performance levels for the product. Key characteristics include reaction to fire class B-S2-d0 for thicknesses over 40mm, thermal resistance ranging from 1.15 to 6.15 m2K/W depending on thickness, thickness range of 30-160mm, and dimensional stability under heat and humidity.
This document provides a declaration of performance for a thermal insulation product intended for use in buildings. It lists the manufacturer, standards used for assessment and verification of constancy of performance (AVCP), essential characteristics, and corresponding performance levels for the product. Key characteristics include reaction to fire class B-S2-d0 for thicknesses over 40mm, thermal resistance ranging from 1.15 to 6.15 m2K/W depending on thickness, thickness range of 30-160mm, and dimensional stability under heat and humidity.
This document provides a declaration of performance for a thermal insulation product intended for use in buildings. It lists the manufacturer, standards used for assessment and verification of constancy of performance (AVCP), essential characteristics, and corresponding performance levels for the product. Key characteristics include reaction to fire class B-S2-d0 for thicknesses over 40mm, thermal resistance ranging from 1.15 to 6.15 m2K/W depending on thickness, thickness range of 30-160mm, and dimensional stability under heat and humidity.
No.: Unique identification code of the product-type Intended use/es Thermal insulation for buildings Manufacturer System/s of AVCP AVCP 3 Harmonised standard EN 13165:2012 + A1:2015 Notified body/ies Notified testing laboratory No. NB 1173 & NB 0751 determined the production type under system AVCP3.
Essential characteristics Performance
(The letters ‘NPD’ (No Performance Determined) are indicated where no performance is declared.) Reaction to fire Reaction to fire E for dN ≥40mm Reaction to fire – end use Reaction to fire – end use B-S2-d0 for dN ≥40mm Thermal resistance Thermal resistance (RD in m²K/W) 1,15 for dN 30mm 6,15 for dN 160mm Thermal conductivity (λD in W/mK) 0,026
Thickness dN: 30-160 mm T2
Compressive strength CS(10/Y)120 Tensile strength/shear behaviour Tensile strength perpendicular to faces: TR80 Shear strength: NPD Shear modulus: NPD Water permeability Water absorption - short term by partial immersion NPD - long term by partial immersion NPD - long term by total immersion WL(T)2 Flatness after one-sided wetting NPD Water vapour permeability Water vapour transmission NPD Acoustic absorption index Sound absorption NPD Direct airborne sound insulation index Sound absorption NPD Continuous glowing combustion No harmonized test method available Release of dangerous substances to No harmonized test method available the indoor environment Durability of reaction to fire against Reaction to fire does not change with time heat, weathering, ageing / degradation Dimensional stability under specified 48h, 70°C, 90% R.H. DS(70,90)3 temperature and humidity conditions 48h, -20°C DS(-20,-)1
Deformation under specified 40 kPa, 70°C, 168h DLT(2)5
compressive load and temperature conditions
Compressive creep NPD
The performance of the product identified above is in conformity with the set of declared performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No 305/211, under the sole responsibility of the manufacturer identified above.
