Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
457 views

Air Slide Data Sheet

The document provides specifications for fans used to convey materials like cement, raw meal, and fly ash through air slides. It includes the flow rates, weights, motor details, and maximum slide lengths for different sized fans. It also lists material conveyance requirements like minimum bend angles and slide inclinations depending on the material.

Uploaded by

TECHCONS Consulting and Engineering Pvt Ltd
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
457 views

Air Slide Data Sheet

The document provides specifications for fans used to convey materials like cement, raw meal, and fly ash through air slides. It includes the flow rates, weights, motor details, and maximum slide lengths for different sized fans. It also lists material conveyance requirements like minimum bend angles and slide inclinations depending on the material.

Uploaded by

TECHCONS Consulting and Engineering Pvt Ltd
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

P m3/hour m3/min/m wts, kg, w.o.

perf sheet wts, kg, w/- perf sheet


200 15 to 65 0.4 78 + 41 X L 78 + 47 X L
315 45 to 180 0.6 91 + 52 X L 91 + 59 X L
400 80 to 350 0.8 103 + 64 X L 103 + 72 X L
500 125 to 500 1.0 116 + 70 X L 116 + 81 X L
630 250 to 1000 1.25 134 + 83 X L 134 + 96 X L
800 450 to 1800 1.6 160 + 101 X L 160 + 117 X L

FANS
KQN 040/044 PL 5.023005 50 Hz 2.2 kW, 2855 rpm 36 kg
KQF 040/044 PL 5.023007 50 Hz 4.0 kW, 2910 rpm 39 kg

Maximum length of Air slide that can be handled by 1 fan, in meters

P---> 200 315 400 500


KQN 040/044 37 25 19 15
KQF 040/044 - 67 50 40

Fully enclosed squirrel cage flanged motors

Optional suction filter for fan - 12 kg each

Material Temperature: Less than or equal to 150 deg C

Material conveyed and Airslide inclinations:


Cement Min. 4 deg )
High Early strength cement Min. 5 deg )
Raw Meal Min. 5 deg ) Max Air slide inclination 20 deg
Filter Dust Min. 8 deg )
Fly Ash Min. 6 deg )

Note for open air (uncovered) installation, add 1 deg

Raw Meal
Mill to Elevator (min bends) 15 deg
Elevator to Separator (min bends) 15 deg
Tailings, Separator to Mill 20 deg Prefer Belt Conveyor

Cement Mill
Mill to Elevator 12 deg
Elevator to Separator 12 deg
Tailings, Separator to Mill 12 deg
Bends, wt, kg surface area m2/m
34 1.4
58 1.7
86 2.1
115 2.3
176 2.7
259 3.2

Motor 16 kg 0-15 m3/min, 35 mbar


Motor 30 kg 0-40 m3/min, 35 mbar

630 800
12 9
32 25

You might also like