Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 68 views

    Tutorial For Buried Piping Modeling and Analysis Using CAEPIPE

    Uploaded by

    FRANCISCO
    The document provides a tutorial for modeling and analyzing buried piping using CAEPIPE software. It outlines 6 steps: 1) Define soil properties, 2) Assign soils to pipe sections, 3) Assign appropriate sections to buried elements, 4) Highlight buried sections for stress review, 5) Refine nodal mesh at bends/elbows/branches, and 6) Save the refined model and analyze, which will provide soil restraint results. The tutorial uses a sample model to demonstrate buried piping modeling capabilities in CAEPIPE.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tutorial For Buried Piping Modeling and Analysis Using CAEPIPE

    Uploaded by

    FRANCISCO
    68 views5 pages
    The document provides a tutorial for modeling and analyzing buried piping using CAEPIPE software. It outlines 6 steps: 1) Define soil properties, 2) Assign soils to pipe sections, 3) Assign appropriate sections to buried elements, 4) Highlight buried sections for stress review, 5) Refine nodal mesh at bends/elbows/branches, and 6) Save the refined model and analyze, which will provide soil restraint results. The tutorial uses a sample model to demonstrate buried piping modeling capabilities in CAEPIPE.

    Original Title

    BuriedPipingTutorial CAEPIPE

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a tutorial for modeling and analyzing buried piping using CAEPIPE software. It outlines 6 steps: 1) Define soil properties, 2) Assign soils to pipe sections, 3) Assign appropriate sections to buried elements, 4) Highlight buried sections for stress review, 5) Refine nodal mesh at bends/elbows/branches, and 6) Save the refined model and analyze, which will provide soil restraint results. The tutorial uses a sample model to demonstrate buried piping modeling capabilities in CAEPIPE.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    68 views5 pages

    Tutorial For Buried Piping Modeling and Analysis Using CAEPIPE

    Uploaded by

    FRANCISCO
    The document provides a tutorial for modeling and analyzing buried piping using CAEPIPE software. It outlines 6 steps: 1) Define soil properties, 2) Assign soils to pipe sections, 3) Assign appropriate sections to buried elements, 4) Highlight buried sections for stress review, 5) Refine nodal mesh at bends/elbows/branches, and 6) Save the refined model and analyze, which will provide soil restraint results. The tutorial uses a sample model to demonstrate buried piping modeling capabilities in CAEPIPE.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    Tutorial for Buried Piping Modeling and Analysis using CAEPIPE

    The following are the Steps to perform Buried Piping Modeling and Analysis using CAEPIPE.

    General
    Soil in Buried piping analysis is modeled by using bilinear restraints with an initial stiffness and an ultimate load.
    After the ultimate load is reached, the displacement continues without any further increase in load, i.e., the yield
    stiffness is zero. The initial stiffness is calculated by dividing the ultimate load by the yield displacement which is
    assumed to be D/25 where D is outside diameter of the pipe.
    Soil modeling is based on Winkler’s soil model of infinite closely spaced elastic springs. Soil stiffness is calculated
    for all three directions at each node. Pressure value in the load is suitably modified to consider the effect of static
    overburden soil pressure. Model is analyzed for operating (W+P1+T1) condition and the displacements in the
    three directions are noted. A check is made for whether skin friction is mobilized and the soil has attained the
    yield state. If true, then the spring is released in that direction indicating that soil no longer offers resistance in that
    direction. This modified model is again analyzed and checked for yield stage. The iterative process is continued
    till the percentage difference between displacements at each node for two successive iterations is less than 1%.
    The final stiffness is the true resistance offered by the soil to the pipe.

    Tutorial
    Snap shot shown below is a sample model for Buried Piping Modeling and Analysis.
    Step 1:
    First define soils using the command Layout window > Misc > Soils.

    Two types of soils can be defined - Cohesive and Cohesionless.


    Cohesive soil is hard to break up when dry, and exhibits significant cohesion when submerged. Cohesive soils
    include clayey silt, sandy clay, silty clay, clay and organic clay.
    Cohesionless soil is any free-running type of soil, such as sand or gravel, whose strength depends on friction
    between particles.
    Soil density and Ground level are input for both cohesive and cohesionless soils. The Ground level is used to
    calculate depth of the buried section. For cohesive soil, Strength is the un-drained cohesive strength (Cs). For
    cohesionless soil, Delta is angle of friction between soil and pipe, and Ks is Coefficient of horizontal soil stress.
    Ground Level
    Ground level for a soil is the height of the soil surface from the global origin (height could be positive or negative).
    It is NOT a measure of the depth of the pipe’s centerline.
    In the figure, the height of the soil surface is 3 feet from the global origin. Pipe node 10 [model origin] is defined at
    (0,-5, 0). So, the pipe is buried 8’ (3’ - [-5’]) deep into the soil. Define similarly for the other soil.
    The pipe centerline is calculated by CAEPIPE from the given data.
    Step 2:
    Tie the soils defined above with pipe sections through Layout window > Misc > Sections or Ctrl+Shft+S (to list
    Sections). Double click on the required section property. You will see the field Soil in the bottom right corner. Pick
    the soil name from the drop-down combo box.

    If a part of a piping system uses a certain pipe section with some portion of it buried and the balance not buried,
    then two separate sections have to be defined, with one of them without soil and the other with soil.
    Step 3:
    Use the appropriate section for each element on the Layout window that is buried with this soil around it.
    Step 4:
    Review the stress layout by highlighting the buried sections of the model in graphics. If your model contains
    sections that are above ground and buried, then you can selectively see only the buried sections of piping in
    CAEPIPE graphics by highlighting the section that is tied to the soil. Use the Highlight feature under the Section
    List window and place highlight on the buried piping section (see Highlight under List window>View menu, or
    press Ctrl+H). The Graphics window should highlight only that portion of the model that is using that specific
    section/soil. See the portion shown in green in the figure below.
    Step 5:
    It is at the bends, elbows, and branch connections that the highest stresses are found in buried piping subjected
    to thermal expansion of the pipe. These stresses are due to the soil forces that bear against the transverse run.
    The stresses are proportional to the amount of soil deformation at the elbow or branch connection. Hence, piping
    elements at the junction of bends, elbows and branch connections are to be refined in the stress layout.
    This can be performed through Layout window > Edit > Refine Nodal Mesh > Buried Piping. Please see the
    section titled “Buried Piping” in CAEPIPE User’s Manual for details on “Nodal mesh generation”.
    Step 6:
    Save the refined model as “BuriedPipingRefined.mod”. Analyze the model through File > Analyze. Upon
    successful analysis, CAEPIPE displays an option “Soil Restraints” in addition to other analysis results.

    You might also like