G-Series Catalog

G Series Wire Rope Hoists
Catalog
2008-07-30
Explanation of Symbols
Explanation of Symbols
Capacity [tons]
tons
lbs Weight [lbs]
Dimensions see page ..
Wire rope hoist
Abbreviations
s/h Starts per hour

NA Not available
Spw Track gauge
SH_16_US.FM
2 07.08
Table of Contents
Table of Contents
Technical Features of G Series Hoist Models A, B, C, D, E.........................................................................5

• Modular design ...............................................................................................................................................5
• Basic hoist versions .......................................................................................................................................6
• Hoist motor.......................................................................................................................................................6
• Longlife hoist brake ........................................................................................................................................6
• Reduction gears..............................................................................................................................................6
• Wire rope .........................................................................................................................................................6
• Rope drive and drum ......................................................................................................................................6
• Rope guide .......................................................................................................................................................7
• Bottom block and load hook .........................................................................................................................7
• Safety devices.................................................................................................................................................7
• Overload devices ............................................................................................................................................7
• Monorail and Double Girder Trolleys...........................................................................................................7
• Articulated Trolleys.........................................................................................................................................7
• Trolley motor....................................................................................................................................................8
• Electrics............................................................................................................................................................8
• Contactor controls..........................................................................................................................................8
• Ambient temperatures ...................................................................................................................................8
• Standard surface protection.........................................................................................................................8
• Quality Management System / Factory test ...............................................................................................8
Technical Features of G Series Hoist Models F............................................................................................9

• Basic hoist versions .......................................................................................................................................9
• Hoist motor.......................................................................................................................................................9
• Reduction gears..............................................................................................................................................9
• Rope drive and drum ......................................................................................................................................9
• Overload devices ............................................................................................................................................9
• Double Girder Trolleys....................................................................................................................................9
Model Number Key...........................................................................................................................................10
Hoist Model Selection Chart ..........................................................................................................................11

Standard Program - Single reeved ................................................................................................................11
Standard Program - Double reeved...............................................................................................................16
Specifications and Cut-sheets.......................................................................................................................19

Base/Top mounted Hoists ...............................................................................................................................19
• Frame size A ..................................................................................................................................................19
• Frame size B ..................................................................................................................................................21
• Frame size C...................................................................................................................................................23
• Frame size D ..................................................................................................................................................27
• Frame size E...................................................................................................................................................28
• Frame size F ...................................................................................................................................................30
Short Headroom Monorail Trolleys - Single reeved ..................................................................................32

• 1 ton.................................................................................................................................................................32
• 2 tons...............................................................................................................................................................34
• 3 tons...............................................................................................................................................................38
• 5 tons...............................................................................................................................................................45
• 7.5 tons............................................................................................................................................................62
• 10 tons.............................................................................................................................................................75
• 15 tons.............................................................................................................................................................90
• 20 tons...........................................................................................................................................................111
• 25 tons...........................................................................................................................................................119
• 30 tons...........................................................................................................................................................127
SH_16_US.FM
07.08 3
Table of Contents
Short Headroom Monorail Trolleys - Double reeved ...............................................................................135

• 1 ton...............................................................................................................................................................135
• 2 tons.............................................................................................................................................................137
• 3 tons.............................................................................................................................................................139
• 5 tons.............................................................................................................................................................141
• 7.5 tons..........................................................................................................................................................145
• 10 tons...........................................................................................................................................................146
• 15 tons...........................................................................................................................................................154
Standard Headroom Monorail Trolleys - Single / Double reeved..........................................................158
Double Girder Top Running Trolleys............................................................................................................160

• Frame size A.................................................................................................................................................160
• Frame size B.................................................................................................................................................161
• Frame size C.................................................................................................................................................162
• Frame size D.................................................................................................................................................164
• Frame size E .................................................................................................................................................165
• Frame size F .................................................................................................................................................168
Equipment and Options..................................................................................................................................173

Extended Lifting Heights ................................................................................................................................173
A020 Geared Upper & Lower Limit Switch ...........................................................................................................174

A021 Operational Limit Switch................................................................................................................................174
A023 Block operated Upper Limit Switch .............................................................................................................174
A040 Travel Limit Switch..........................................................................................................................................175
A100 Rope Exit Angles..............................................................................................................................................176
A101 Angle of Installation........................................................................................................................................177
A150 Towing Arm for Power Supply ......................................................................................................................177
A190 Articulated Trolleys ........................................................................................................................................178

• Selection Chart............................................................................................................................................178
• Articulated Trolley, Frame size A..............................................................................................................179
• Articulated Trolley, Frame size B..............................................................................................................180
• Articulated Trolley, Frame size C ..............................................................................................................181
Components and Accessories......................................................................................................................182

B030 Bottom Hook Blocks .......................................................................................................................................182
B031 • Bottom Hook Block 1PS (1/1) ....................................................................................................................182
B032 • Bottom Hook Block 1PD (2/2-1) ................................................................................................................182
B033 • Bottom Hook Block 2PS (2/1) ....................................................................................................................183
B034 • Bottom Hook Block 4PS (4/1), 2PD (4/2-1)...............................................................................................183
B037 • Bottom Hook Block 4PD (8/2-1) ................................................................................................................184
B040 • Bottom Hook Block 5PD (10/2-1) ..............................................................................................................184
B050 Load Hooks.......................................................................................................................................................185

B061 Rope Sheaves ..................................................................................................................................................185
B062 Rope Anchorages............................................................................................................................................185
B080 Runway Endstops............................................................................................................................................186
Technical Data ................................................................................................................................................187

C060 Hoist Motors (2 speed) ...................................................................................................................................187
Hoist Motors (4-pole for inverter).................................................................................................................187
C070 Travel Motors Hoist Models A - E.................................................................................................................187

Travel Motors Hoist Model F .........................................................................................................................188
SH_16_US.FM
Quick Selection Chart....................................................................................................................................189
4 07.08
Technical Features of G Series Hoists
Technical Features of G Series Hoist Models A, B, C, D, E
Utilizing the limited avaliable space above work place areas has become increasingly important
when transporting loads in industry and craft. We, with our experience of over 100 years in the
materials handling business, aim to optimize our product line to meet the requirements of today's
markets.
All our efforts in R & D, manufacturing and serving the industry are dedicated to our customers'
demands.
A sturdy product quality, reliable safety features, long service life, low maintenance, operator
convenience and easy trouble-shooting, are among the issues raised by crane companies, dealers
and industrial users. All of these, of course, along with speedy and reliable deliveries.
Recognizing these demanding requirements, we developed the G series hoist, with the main focus
on heavy-duty design, compact dimensions and the use of virtually maintenance-free components.
The G series hoist is now available in 5 frame sizes, covering the capacity range from 1 to 30 tons.
For even higher capacities, we offer the proven model F hoist.
Frame size A, B, C Frame size D, E
1 Hoist motor
2 Hoist brake
3 Reduction gears
4 Rope drum (with rope guide)
5 Control panel
6 Geared limit switch
Modular design
• Up to 3 different hoist motors per frame size.
• Lift speeds from 16 fpm to 80 fpm.
• Trolleys available with 3 different dual speed ranges.
• 2-4 different drum lengths per frame size.
• Single reeved models.
• Double reeved models.
• Explosion proof design available.
SH_16_US.FM
07.08 5
Basic hoist versions

• Monorail "short headroom" trolley, max. 15 tons.
• Double girder top running trolley, max. 30 tons.
• Base mounted hoist, max. 30 tons.
• Top mounted hoist, max. 15 tons.
• Winch with flexible rope exit angles und multiple mounting positions, max. 15 tons.
• Articulated trolleys, capable of negotiating curves, max. 10 tons.
Base mounted hoist
Hoist motor
• Oversized, heavy-duty design, rated H4 / H5 to HMI.
• TEFC design (totally enclosed fan-cooled).
• 2 speeds are standard (6:1 ratio). Thus, both fast lifting and precise handling of materials are
possible.
• Power ratings up to 40 HP, fast lifting speeds even at high capacities.
• Duty cycles of 60% DC (time on vs. time off), and 360 s/h (starts per hour) at least.
• Standard temperature control (PTC sensors, embedded in windings).
• Protection class NEMA 4, insulation class F.
• 3-phase AC squirrelcage induction motor with cylindrical rotor. The coils are 2/12-poled.
• Further motor data see C060, C070.
Motor with brake: 1 Hoist motor
2 Hoist brake
Longlife hoist brake
• Oversized design for maximal safety. Brake torque over 150%.
• Twin-disc magnetic brake, totally enclosed. Protection NEMA 4.
• Asbestos-free brake linings.
• Self-adjusting. Under normal operating conditions, no replacement of the brake is required during
the entire service life of the hoist.
Î Minimum maintenance requirement
Reduction gears
• Lifetime lubrication.
• Low noise, extremely smooth running properties, because the gear wheels are honed after
hardening (technology, adopted from the automotive industry where quality standards are
extremely rigid).
• Designed to the most advanced technology; gears completely enclosed in a non-split housing
(type A, B, C); type D, E model with a split housing.
Î Maintenance free
Wire rope
• Rope safety factor 5.0 or better. The nominal load does not exceed 20% of the wire rope's
minimum breaking strength.
• High-strength, flexible wire ropes, developed for the G series.
• Generally, for standard lifts (up to 90 ft) non-twist-free ropes are used (less wear, compared with
twist-free ropes). Long-Iift hoists are equipped with twist-free ropes.
Non-twist free rope Twist free rope
Rope drive and drum

• Fine machining of the drum grooves reduces the rope wear to a minimum.
• Return sheaves suspended from a pivoted bar, thus the sheaves follow a possible side move of
the rope (less wear on ropes and sheeves).
• The standard reevings are 4/1 (4 part-single).
• 2/1 (2 part-single), 4/2-1 (2 part-double) and 8/2-1 (4 part-double) are also available. Less wear on
sheaves and rope than with "multiple reevings".
SH_16_US.FM
4PS (4/1) 2PS (2/1) 2PD (4/2-1) Î Designed for maximal safety and a long service life
6 07.08
Rope guide
• Completely enclosed rope guide.
• Extremely wear resistant, made from cast steel alloy.
• No temperature limitations.
• High resistance to side pull.
• No multiple rope layers on the drum.
• Easy to replace due to the unique "frameless" design of the G series hoist.
Î High reliability and lifetime
Rope drive with drum
Bottom block and load hook

• Sturdy, oversized bottom block with low headroom.
• Forged load hooks. Swivelling design (full 360 degree rotation of hook).
• Single load hook, option for sister hook (ramshorn hook).
• Spring-loaded safety latch.
• Dimensions see B030.
Safety devices
• Geared upper and lower limit switch. Additional switching elements are available, when more
c1566v01
Bottom block Optional limit positions are required. Details and specifications see A020.
• Standard temperature controls for hoist and travel motor.
• Option for overload devices, see next paragraph.
Overload devices
• Frame sizes A, B, C and E are available with an electronic overload measuring system SLE+LET.
The load is measured by the load cell LET which is installed at the rope anchorage. The load cell
provides an analog output amperage (4-20 mAmp), which is evaluated in the electronic device
SLE. When output amperage exceeds the set cut-off point, any further lifting will be cut off, and
system will be reset only after lowering of the overload.
LET
Monorail and Double Girder Trolleys

• Choose from monorail "short headroom" trolleys or double girder top running trolleys.
• Extremely compact design with low headrooms.
• The monorail trolley is easily and infinitely adjustable to the required flange width. No need to
specify the runway girder when ordering the hoist (for flange width up to 12").
• Monorail trolleys available for monobox girders with extremely wide flange widths.
• Choose from a range of standard track gauges for the double girder trolleys, or specify custom
SH track gauges for existing cranes and special projects.
• Trolley wheels made from cast steel alloy with self-lubricating properties, guaranteeing low wear
and long lifetime.
• Unique "floating" trolley frame design. A balanced and even load distribution to all 4 wheels is
guaranteed.
TR
Articulated Trolleys
Articulated trolleys are used on curved runways. The bogies with lateral guide rollers travel round
even tight bends with minimal wear on the runway.
AS
SH_16_US.FM
07.08 7
Trolley motor
• 2 trolley speeds (1:4 ratio) are standard. Choose from 80/20 fpm (standard), 40/10 fpm or
125/30 fpm. Other speeds are available on request.
• Smooth acceleration and deceleration due to inertia flywheel.
• Trolley brakes and TEFC design are standard.
• Heavy duty rating 60% DC (time on vs. time off).
• Rotating axles are standard. No open gearings.
• Built-in temperature control (PTC sensors, embedded in windings).
• Further trolley motor data see C060, C070.
Electrics
• Standard supply voltages: 460-480/3/60 or 230/3/60.
• Options: 208/3/60, 575/3/60 und others.
• Protection mode NEMA 3 / NEMA 12. NEMA 4x available as option.
• Insulation class F.
Contactor controls
• The controls are installed in a panel which is attached to the hoist.
• Fiberglass reinforced control panel, protection NEMA 4x.
• Weld-resistant contactors.
• Releasing devices for hoist and trolley motor temperature control are included.
• Fuses are standard.
• Standard control voltage 110 Volts. 48 Volt and others are available.
• Proven standard pendant station with on/off buttons.
• Choose from the following control options:
• (a) No controls: motors wired on terminal strips.
• (b) Complete controls: incIuding transformer & pendant station for monorail installations.
• (c) OEM-controls: hoist/trolley controls without transformer and pendant station for
bridge crane installations.
Ambient temperatures
• Standard: -5 thru +105 F (at rest: max. +155 F)
• Options: -5 thru + 140 F or +20 thru + 175 F or -40 thru + 120 F
Standard surface protection

• Pre-treatment by sand-blasting and degreasing, sheet metal parts protected by a thin layer of
iron phosphate.
• Standard painting: acrylic resin base, signal yellow RAL 1003 / anthracite RAL 7021.
• 1 priming layer and 1 top coat. Standard dry film thickness: 2.4 - 3.0 mils.
• Epoxy paint and increased paint thickness on request.
Quality Management System / Factory test

• Every hoist undergoes comprehensive tests, including an overload test at 125% of the rated
capacity, prior to shipment.
• Quality Management System complies with ISO 9001.
SH_16_US.FM
8 07.08
Technical Features of G Series Hoist Models F
The hoist generation of the model F is the predecessor of the generation A - E. The model F is the
biggest one out of this series and due to its success it was not replaced by another hoist.
A sturdy product quality, reliable safety features, long service life, low maintenance, operator
convenience and easy trouble-shooting are among the issues raised by crane companies and
industrial users.
The main design differences to the hoist models A - E are like follows:
Frame size F
2 1 3 4 6 5
W0762a_v
Basic hoist versions

• Double girder top running trolley.
• Base mounted hoist.
• Capacity ranges from 20 - 100 tons with twin hoist.
Hoist motor
• Power ratings up to 46 HP per hoist motor.
• Further motor data see C060, C070.
Reduction gears
• Three step spur gear.
• Helical gearing, hardened and hard machined.
• Additional planetary gear step.
• Roller or ball bearing only.
• Low maintenace oil bath lubrication.
Î High safety and lifetime
Rope drive and drum

• The standard reevings are 4/1 (4 part-single).
• 8/2-1 (4 part-double) and 10/2-1 (5 part-double) are also available.
Overload devices
• The load is measured by the load cell LAS2 which is installed at the hoist gear box. LAS2 is
measuring the axial force of a helically geared pinion. The load cell provides an analog output
amperage (4-20mAmp), which is evaluated in the electronic device SLE (the load cell is pre-
LAS2
stressed by approx. 30% of nominal stress).
OE Double Girder Trolleys

• Extremely compact design with low headrooms.
• Choose from a range of standard track gauges, or specify custom track gauges for existing
cranes and special projects.
• Trolley wheels made from cast steel alloy with self-lubricating properties, guaranteeing low wear
SH_16_US.FM
and long lifetime.

• Stiff trolley frame design.
07.08 9
Technical Features of G Series Hoists Model
Number Key
Model Number Key
5 G B TR - 4PS - 20 D2 - 20 T - A
Voltage 0 = 460/60
A = 230/60
B = 208/60
C = 575/60
D = 400/50
T = Two speed hoist motor

V = Variable speed hoist motor
Lifting speed [fpm]
Drum length D2, D3, D4, D5
Height of Lift [ft]
Reeving
Configuration SH = monorail trolley, short headroom

UH = monorail trolley, standard headroom
AS = monorail trolley, articulated short headroom
AU = monorail trolley, articulated standard headroom
TR = double girder trolley, top running
BM = base mounted
TM = top mounted
Frame size A, B, C, D, E, F
Hoist series G
Capacity [tons]
SH_16_US.FM
10 07.08
Single reeved Standard Program
Hoist Model Selection Chart
Note: All hoists with pole-changing hoist motor (H33, H42, H71, H72, H73) are optionally available with 4-pole motors (4H33, 4H42, ...) for frequency inver-
ter. 4-pole motors 440-480 V/120 Hz. Motors are with separate encoder mounted at end of motor shaft. The encoder provides 600ppr and requires bet-
ween 10 and 30 VDC supply voltage (terminal box at encoder).
Exact motor output see C060.
Capa- Duty Class Lifting Lifting Hoist Model No. Hoist Motor Wire Base Hoist Monorail Double Girder
city Speed Height Rope Trolley Trolley
Configuration
Configuration
Configuration
FEM HMI Type %DC Starts Motor Motor
("On" per HP HP
Time) hour @ @
tons lbs 80/20 lbs 80/20 lbs
fast/ fast/ fpm fpm
[tons] [fpm] [ft] [HP] slow slow [mm] xx= [lbs] xx= [lbs] xx= [lbs]
1 3m H4+ 40/6.6 39 1GAxx-2PS-39D2-40T H 33 50/20 180/360 7 BM 320 19 SH .6 / .15 585 32 TR .6 / .15 665 160
66 1GAxx-2PS-66D3-40T [4.9/ TM 345 20 SH 620 33 685
0.7]
2m H4 80/13.2 78 1GBxx-1PS-78D2-80T H 42 40/20 120/240 9 BM 410 21 UH .6 / .15 820 158 -
131 1GBxx-1PS-131D3-80T [7.8/ TM 445 22 UH 875 158
1.3]
2 3m H4+ 20/3.3 20 2GAxx-4PS-20D2-20T H 33 50/20 180/360 7 BM 355 19 SH .6 / .15 620 34 TR .6 / .15 700 160
33 2GAxx-4PS-33D3-20T [4.9/ TM 375 20 SH 655 35 720
0.7]
2m H4 40/6.6 39 2GBxx-2PS-39D2-40T H 42 40/20 120/240 9 BM 420 21 SH .6 / .15 675 36 TR .6 / .15 765 161
66 2GBxx-2PS-66D3-40T [7.8/ TM 455 22 SH 735 37 805
1.3]
3 2m H4 20/3.3 20 3GA-4PS-20D2-20T H 33 40/20 120/240 7 BM 355 19 SH .6 / .15 620 38 TR .6 / .15 700 160
33 3GA-4PS-33D3-20T [4.9/ TM 375 20 SH 655 39 720
0.7]
2m H4 32/5.3 39 3GBxx-2PS-39D2-32T H 42 40/20 120/240 9 BM 420 21 SH .6 / .15 675 40 TR .6 / .15 765 161
66 3GBxx-2PS-66D3-32T [7.8/ TM 455 22 SH 735 42 805
1.3]
3m H4+ 40/6.6 39 3GCxx-2PS-39D2-40T H 71 50/20 240/480 12.5 BM 905 23 SH .6 / .15 1,620 41 TR .6 / .15 1,580 162
66 3GCxx-2PS-66D3-40T [15.5/ TM 970 24 SH 1,710 43 1,625
2.4]
131 3GCxx-2PS-131D4-40T 1,105 SH 2,075 44 1,810
2m H4 64/10.5 262 3GCxx-1PS-262D4-64T H 71 40/20 150/300 12.5 BM 1,225 25 .6 / .15 1,650 -
[15.5/ TM 26
2.4]
5 2m H4 20/3.3 20 5GBxx-4PS-20D2-20T H 42 40/20 120/240 9 BM 420 21 SH .6 / .15 675 45 TR .6 / .15 765 161
33 5GBxx-4PS-33D3-20T [7.8/ TM 455 22 SH 735 47 805
1.3]
3m H4+ 25/4.0 39 5GCxx-2PS-39D2-25T H 71 40/20 120/240 12.5 BM 905 23 SH .6 / .15 1,620 49 TR .6 / .15 1,580 162
66 5GCxx-2PS-66D3-25T [15.5/ TM 970 24 SH 1,710 53 1,625
2.4]
131 5GCxx-2PS-131D4-25T 1,105 SH 2,075 58 1,810
2m H4 40/6.6 39 5GCxx-2PS-39D2-40T H 71 40/20 150/300 12.5 BM 905 23 SH .6 / .15 1,620 50 TR .6 / .15 1,580 162
66 5GCxx-2PS-66D3-40T [15.5/ TM 970 24 SH 1,710 54 1,625
2.4]
131 5GCxx-2PS-131D4-40T 1,105 SH 2,075 59 1,810
2m H4 64/10.6 39 5GCxx-2PS-39D2-64T H 72 40/20 120/240 12.5 BM 970 23 SH .6 / .15 1,690 51 TR .6 / .15 1,645 162
66 5GCxx-2PS-66D3-64T [25.3/ TM 1,040 24 SH 1,775 55 1,690
3.9]
131 5GCxx-2PS-131D4-64T 1,170 SH 2,140 60 1,875
3m H4+ 20/3.3 20 5GCxx-4PS-20D2-20T H 71 50/20 240/480 12.5 BM 1,025 23 SH .6 / .15 1,665 46 TR .6 / .15 1,665 162
33 5GCxx-4PS-33D3-20T [15.5/ TM 1,105 24 SH 1,755 48 1,710
2.4]
66 5GCxx-4PS-66D4-20T 1,260 SH 2,120 56 1,900
3m H4+ 40/6.6 56 5GDxx-2PS-56D2-40T H 71 40/20 150/300 14 BM 1,700 27 SH .6 / .15 2,910 52 TR .9 / .2 2,495 164
93 5GDxx-2PS-93D3-40T [15.5/ 1,820 SH 3,265 57 2,580
2.4]
186 5GDxx-2PS-186D4-40T 2,240 SH 3,815 61 3,010
278 5GDxx-2PS-278D5-40T 2,385 - - 3,750
7.5 1Am H3 16/2.6 20 7.5GBxx-4PS-20D2-16T H 42 40/20 120/240 9 BM 420 21 SH .6 / .15 675 62 TR .6 / .15 765 161
33 7.5GBxx-4PS-33D3-16T [7.8/ TM 455 22 SH 735 65 805*1
1.3]
SH_26_US.FM
*1 Spw 55 1/8, D3 only up to 6 tons
07.08 11
Standard Program Single reeved
Configuration
Configuration
Configuration
("On" per HP HP
Time) hour @ @
fast/ fast/ fpm fpm
7.5 1Am H3 32/5.3 39 7.5GCxx-2PS-39D2-32T H 71 40/20 120/240 12.5 BM 905 25 SH .9 / .2 1,620 68 TR .9 / .2 1,580 163
66 7.5GCxx-2PS-66D3-32T [15.5/ TM 970 26 SH 1,710 70 1,625
2.4]
132 7.5GCxx-2PS-132D4-32T 1,105 - - 1,810
3m H4+ 20/3.3 20 7.5GCxx-4PS-20D2-20T H 71 40/20 150/300 12.5 BM 1,025 23 SH .9 / .2 1,665 63 TR .9 / .2 1,665 162
33 7.5GCxx-4PS-33D3-20T [15.5/ TM 1,105 24 SH 1,755 66 1,710
2.4]
66 7.5GCxx-4PS-66D4-20T 1,260 SH 2,120 71 1,900
3m H4+ 32/5.3 20 7.5GCxx-4PS-20D2-32T H 72 40/20 120/240 12.5 BM 1,095 23 SH .9 / .2 1,735 64 .9 / .2 1,735 162
33 7.5GCxx-4PS-33D3-32T [25.3/ TM 1,170 24 SH 1,820 67 1,775
3.9]
66 7.5GCxx-4PS-66D4-32T 1,325 SH 2,185 72 1,965
2m H4 40/6.6 56 7.5GDxx-2PS-56D2-40T H 72 40/20 120/240 14 BM 1,745 27 SH .9 / .2 2,955 69 TR .9 / .2 2,540 164
93 7.5GDxx-2PS-93D3-40T [25.3/ 1,865 SH 3,310 73 2,625
3.9]
186 7.5GDxx-2PS-186D4-40T 2,285 SH 3,860 74 3,055
278 7.5GDxx-2PS-278D5-40T 2,425 - - 3,795
10 2m H4 20/3.3 20 10GCxx-4PS-20D2-20T H 71 40/20 150/300 12.5 BM 1,025 23 SH 2.0 / .5 1,665 75 TR 2.0 / .5 1,665 162
33 10GCxx-4PS-33D3-20T [15.5/ TM 1,105 24 SH 1,755 79 1,710
66 10GCxx-4PS-66D4-20T 2.4] 1,260 SH 2,120 85 1,900
2m H4 32/5.3 20 10GCxx-4PS-20D2-32T H 72 40/20 120/240 12.5 BM 1,095 23 SH 2.0 / .5 1,735 76 TR 2.0 / .5 1,735 162
33 10GCxx-4PS-33D3-32T [25.3/ TM 1,170 24 SH 1,820 80 1,775
66 10GCxx-4PS-66D4-32T 3.9] 1,325 SH 2,185 86 1,965
3m H4+ 20/3.3 28 10GDxx-4PS-28D2-20T H 71 40/20 150/300 14 BM 1,700 27 SH 2.0 / .5 2,910 77 TR 2.0 / .5 2,495 164
46 10GDxx-4PS-46D3-20T [15.5/ 1,820 SH 3,265 82 2,580
93 10GDxx-4PS-93D4-20T 2.4] 2,240 SH 3,815 87 3,010
139 10GDxx-4PS-139D5-20T 2,385 - - 3,750
3m H4+ 32/5.3 28 10GDxx-4PS-28D2-32T H 72 40/20 120/240 14 BM 1,745 27 SH 2.0 / .5 2,955 78 TR 2.0 / .5 2,540 164
46 10GDxx-4PS-46D3-32T [25.3/ 1,865 SH 3,310 83 2,625
3.9]
93 10GDxx-4PS-93D4-32T 2,285 SH 3,860 88 3,055
139 10GDxx-4PS-139D5-32T 2,425 - - 3,795
2m H4 32/5.3 39 10GExx-2PS-39D2-32T H 72 40/20 120/240 20 BM 1,985 28 SH 2.0 / .5 3,200 81 TR 2.0 / .5 2,770 165
65 10GExx-2PS-65D3-32T [25.3/ 2,150 SH 3,595 84 2,900
3.9]
131 10GExx-2PS-131D4-32T 2,660 SH 4,235 89 3,420
196 10GExx-2PS-196D5-32T 2,910 - - 3,880
15 1Am H3 16/2.6 20 15GCxx-4PS-20D2-16T H 71 40/20 120/240 12.5 BM 1,055 25 SH 2.0 / .5 1,700 90 TR 2.0 / .5 1,700 163
33 15GCxx-4PS-33D3-16T [15.5/ TM 1,125 26 SH 1,775 97 1,770
66 15GCxx-4PS-66D4-16T 2.4] 1,280 - - 2,135
1Am H3 25/4.2 20 15GCxx-4PS-20D2-25T H 72 40/20 120/240 12.5 BM 1,125 25 SH 2.0 / .5 1,800 91 TR 2.0 / .5 1,920 163
33 15GCxx-4PS-33D3-25T [25.3/ TM 1,205 26 SH 1,890 98 1,985
66 15GCxx-4PS-66D4-25T 3.9] 1,360 - - 2,340
2m H4 12/2.0 28 15GDxx-4PS-28D2-12T H 71 40/20 150/300 14 BM 1,700 27 SH 2.0 / .5 2,910 94 TR 2.0 / .5 2,495 164
46 15GDxx-4PS-46D3-12T [15.5/ 1,820 SH 3,265 101 2,580
93 15GDxx-4PS-93D4-12T 2.4] 2,240 SH 3,815 106 3,010
139 15GDxx-4PS-139D5-12T 2,385 - - 3,750
46 15GDxx-4PS-46D3-20T [25.3/ 1,865 SH 3,310 102 2,625
3.9]
93 15GDxx-4PS-93D4-20T 2,285 SH 3,860 107 3,055
139 15GDxx-4PS-139D5-20T 2,425 - - 3,795
46 15GDxx-4PS-46D3-23T [39.4/ 1,910 SH 3,375 103 2,670
6.3]
93 15GDxx-4PS-93D4-23T 2,330 SH 3,925 108 3,100
139 15GDxx-4PS-139D5-32T 2,470 - - 3,840
SH_26_US.FM
12 07.08
Configuration
Configuration
Configuration
("On" per HP HP
Time) hour @ @
fast/ fast/ fpm fpm
15 3m H4+ 20/3.3 20 15GExx-4PS-20D2-20T H 72 40/20 120/240 20 BM 2,275 28 UH 2x .9 / .2 4,830 92 TR 2.0 / .5 3,400 166
33 15GExx-4PS-33D3-20T [25.3/ 2,440 UH 5,300 99 3,530
3.9]
66 15GExx-4PS-66D4-20T 2,945 UH 6,375 104 4,090
96 15GExx-4PS-96D5-20T 3,200 UH 6,925 109 4,675
3m H4+ 32/5.3 20 15GExx-4PS-20D2-32T H 73 40/20 120/240 20 BM 2,320 28 UH 2x .9 / .2 4,965 93 TR 2.0 / .5 3,530 166
33 15GExx-4PS-33D3-32T [39.4/ 2,480 UH 5,425 100 3,675
66 15GExx-4PS-66D4-32T 6.3] 3,000 UH 6,285 105 4,235
96 15GExx-4PS-96D5-32T 3,245 UH 7,055 110 4,810
20 2m H4 16/2.6 20 20GExx-4PS-20D2-16T H 72 40/20 120/240 20 BM 2,275 28 UH 2x 2.0 / .5 4,830 111 TR 3.3 / .8 3,400 166
33 20GExx-4PS-33D3-16T [25.3/ 2,440 UH 5,300 113 3,530
3.9]
66 20GExx-4PS-66D4-16T 2,945 UH 6,375 115 4,090
96 20GExx-4PS-96D5-16T 3,200 UH 6,925 117 4,675
2m H4 25/4.2 20 20GExx-4PS-20D2-25T H 73 40/20 120/240 20 BM 2,320 28 UH 2x 2.0 / .5 4,965 112 TR 3.3 / .8 3,530 166
33 20GExx-4PS-33D3-25T [39.4/ 2,480 UH 5,425 114 3,675
6.3]
66 20GExx-4PS-66D4-25T 3,000 UH 6,285 116 4,235
96 20GExx-4PS-96D5-25T 3,245 UH 7,055 118 4,810
3m H4+ 25/4.2 23 20GFxx-4PS-23D1-20P H 73 40/20 120/240 25 BM 3,780 30 TR 2.0 / .5 6,240 168
39 20GFxx-4PS-39D2-20P [39.4/ 4,180 6,860
59 20GFxx-4PS-59D4-20P 6.3] 5,100 8,800
25 2m H4 12/2.0 20 25GExx-4PS-20D2-12T H 72 40/20 120/240 20 BM 2,275 28 UH 2x 2.0 / .5 4,830 119 TR 3.3 / .8 3,400 166
33 25GExx-4PS-33D3-12T [25.3/ 2,440 UH 5,300 121 3,530
66 25GExx-4PS-66D4-12T 3.9] 2,945 UH 6,375 123 4,090
96 25GExx-4PS-96D5-12T 3,200 UH 6,925 125 4,675
2m H4 20/3.3 20 25GExx-4PS-20D2-20T H 73 40/20 120/240 20 BM 2,320 28 UH 2x 2.0 / .5 4,965 120 TR 3.3 / .8 3,530 166
33 25GExx-4PS-33D3-20T [39.4/ 2,480 UH 5,425 122 3,675
6.3]
66 25GExx-4PS-66D4-20T 3,000 UH 6,285 124 4,235
96 25GExx-4PS-96D5-20P 3,245 UH 7,055 126 4,810
2m H4 2.5 to 25 20 25GExx-4PS-20D2-32F 4H81 60 20 BM 2,560 28 UH 2x 2.0 / .5 5,180 120 TR 3.3 / .8 3,780 166
33 25GExx-4PS-33D3-32F [46.0] 2,750 UH 5,670 122 3,920
66 25GExx-4PS-66D4-32F 3,230 UH 6,510 124 4,480
96 25GExx-4PS-96D5-32F 3,710 UH 7,280 126 5,060
3m H4+ 20/3.3 23 25GFxx-4PS-23D1-20T H 73 40/20 120/240 25 BM 3,780 30 TR 2.0 / .5 6,240 168
39 25GFxx-4PS-39D2-20T [39.4/ 4,180 6,860
59 25GFxx-4PS-59D4-20T 6.3] 5,100 8,800
3m H4+ 2.5 to 25 23 25GFxx-4PS-23D1-25F 4H81 60 25 BM 4,060 30 TR 2.0 / .5 6,460 168
39 25GFxx-4PS-39D2-25F [46.0] 4,460 7,080
59 25GFxx-4PS-59D4-25F 5,300 9,000
30 1Am H3 10/1.6 20 30GExx-4PS-20D2-10T H 72 40/20 120/240 20 BM 2,275 28 UH 2x 2.0 / .5 4,830 127 TR 3.3 / .8 3,400 166
33 30GExx-4PS-33D3-10T [25.3/ 2,440 UH 5,300 129 3,530
66 30GExx-4PS-66D4-10T 3.9] 2,945 UH 6,375 131 4,090*1
96 30GExx-4PS-96D5-10T 3,200 UH 6,925 133 4,675*2
1Am H3 16/2.6 20 30GExx-4PS-20D2-16T H 73 40/20 120/240 20 BM 2,320 28 UH 2x 2.0 / .5 4,965 128 TR 3.3 / .8 3,530 166
33 30GExx-4PS-33D3-16T [39.4/ 2,480 UH 5,425 130 3,675
6.3]
66 30GExx-4PS-66D4-16T 3,000 UH 6,285 132 4,235*1
96 30GExx-4PS-96D5-16T 3,245 UH 7,055 134 4,810*2
1Am H3 2.0 to 20 20 30GExx-4PS-20D2-25F 4H81 60 20 BM 2,560 28 UH 2x 2.0 / .5 5,180 128 TR 3.3 / .8 3,780 166
33 30GExx-4PS-33D3-25F [46.0] 2,750 UH 5,670 130 3,920
66 30GExx-4PS-66D4-25F 3,230 UH 6,510 132 4,480*1
96 30GExx-4PS-96D5-25F 3,710 UH 7,280 134 5,060*2
SH_26_US.FM

*2 Spw 124, D5 only up to 25 tons
07.08 13
Standard Program Single reeved
Configuration
Configuration
Configuration
("On" per HP HP
Time) hour @ @
fast/ fast/ fpm fpm
30 3m H4+ 16/2.6 23 30GFxx-4PS-23D1-16T H 73 40/20 120/240 25 BM 3,780 30 TR 2.0 / .5 6,240 168
39 30GFxx-4PS-39D2-16T [39.4/ 4,180 6,860
6.3]
59 30GFxx-4PS-59D4-16T 5,100 8,800
3m H4+ 2.0 to 20 23 30GFxx-4PS-23D1-20F 4H81 60 25 BM 4,060 30 TR 2.0 / .5 6,460 168
39 30GFxx-4PS-39D2-20F [46.0] 4,460 7,080
59 30GFxx-4PS-59D4-20F 5,300 9,000
35 2m H4 16/2.6 23 35GFxx-4PS-23D1-16T H 73 40/20 120/240 25 BM 3,780 30 TR 2.0 / .5 6,240 168
39 35GFxx-4PS-39D2-16T [39.4/ 4,180 6,860
6.3]
59 35GFxx-4PS-59D4-16T 5,100 8,800
2m H4 2.0 to 20 23 35GFxx4PS-23D1-20F 4H81 60 25 BM 4,060 30 TR 2.0 / .5 6,460 168
39 35GFxx4PS-39D2-20F [46.0] 4,460 7,080
59 35GFxx4PS-59D4-20F 5,300 9,000
3m H4+ 13/2.1 26 35GFxx-6PS-26D2-13T H 73 40/20 120/240 25 5,220
39 35GFxx-6PS-39D3-13T [39.4/ 5,660
6.3]
52 35GFxx-6PS-52D4-13T 6,140
on request
65 35GFxx-6PS-65D5-13T 6,410
3m H4+ 0.8 to 16 26 35GFxx-6PS-26D2-16F 4H81 60 25 5,490
39 35GFxx-6PS-39D3-16F [46.0] 5,930
52 35GFxx-6PS-52D4-16F 6,420
65 35GFxx-6PS-65D5-16F 6,700
40 1Am H3 12/2.0 23 40GFxx-4PS-23D1-12T H 73 40/20 120/240 25 BM 3,780 30 TR 3.3 / .8 6,240 168
39 40GFxx-4PS-39D2-12T [39.4/ 4,180 6,860
6.3]
59 40GFxx-4PS-59D4-12T 5,100 8,800
2m H4 1.5 to 15 23 40GFxx-4PS-23D1-16F 4H81 60 25 BM 4,060 30 TR 3.3 / .8 6,460 168
39 40GFxx-4PS-39D2-16F [46.0] 4,460 7,080
59 40GFxx-4PS-59D4-16F 5,300 9,000
3m H4+ 13/2.1 26 40GFxx-6PS-26D2-13T H 73 40/20 120/240 25 5,220
39 40GFxx-6PS-39D3-13T [39.4/ 5,660
6.3]
52 40GFxx-6PS-52D4-13T 6,140
on request
65 40GFxx-6PS-65D5-13T 6,410
3m H4+ 0.8 to 16 26 40GFxx-6PS-26D2-16F 4H81 60 25 5,490
39 40GFxx-6PS-39D3-16F [46.0] 5,930
52 40GFxx-6PS-52D4-16F 6,420
65 40GFxx-6PS-65D5-16F 6,700
50 1Bm H2 10/1.6 23 50GFxx-4PS-23D1-10T H 73 40/20 120/240 25 BM 3,780 30 TR 5.2 / 1.4 6,240 169
39 50GFxx-4PS-39D2-10T [39.4/ 4,180 6,860
59 50GFxx-4PS-59D4-10T 6.3] 5,100 8,800
2m H4 1.5 to 15 23 50GFxx-4PS-23D1-13F 4H81 60 25 BM 4,060 30 TR 5.2 / 1.4 6,460 169
39 50GFxx-4PS-39D2-13F [46.0] 4,460 7,080
59 50GFxx-4PS-59D4-13F 5,300 9,000
2m H4 10/1.6 26 50GFxx-6PS-26D2-10T H 73 40/20 120/240 25 5,220
39 50GFxx-6PS-39D3-10T [39.4/ 5,660
52 50GFxx-6PS-52D4-10T 6.3] 6,140
65 50GFxx-6PS-65D5-10T 6,410
on request
2m H4 0.6 to 13 26 50GFxx-6PS-26D2-13F 4H81 60 25 5,490

39 50GFxx-6PS-39D3-13F [46.0] 5,930
52 50GFxx-6PS-52D4-13F 6,420
65 50GFxx-6PS-65D5-13F 6,700
3m H4+ 10/1.6 20 50GFxx-8PS-20D2-10T H 73 40/20 120/240 25 7,200
30 50GFxx-8PS-30D3-10T [39.4/ 7,420
6.3]
50GFxx-8PS-..D4-10T -
SH_26_US.FM
14 07.08
Configuration
Configuration
Configuration
("On" per HP HP
Time) hour @ @
fast/ fast/ fpm fpm
[tons] [fpm] [ft] [HP] slow slow[mm] xx= [lbs] xx= [lbs] xx= [lbs]
50 3m H4+ 0.6 to 12 20 50GFxx-8PS-20D2-12V 4H81 60 25 7,480
30 50GFxx-8PS-30D3-12V [46.0] 7,920
50GFxx-8PS-..D4-12V -
60 2m H4 0.5 to 11 26 60GFxx-6PS-26D2-11V 4H81 60 25 5,490
39 60GFxx-6PS-39D3-11V [46.0] 5,930
52 60GFxx-6PS-52D4-11V 6,420
65 60GFxx-6PS-65D5-11V 6,700
70 1Am H3 8/1.2 26 70GFxx-6PS-26D2-8T H 73 40/20 120/240 25 5,220
39 70GFxx-6PS-39D3-8T [39.4/ 5,660
52 70GFxx-6PS-52D4-8T 6.3] 6,140
65 70GFxx-6PS-65D5-8T 6,410
1Am H3 0.5 to 11 26 70GFxx-6PS-26D2-11V 4H81 60 25 5,490
39 70GFxx-6PS-39D3-11V [46.0] 5,930
on request
52 70GFxx-6PS-52D4-11V 6,420
65 70GFxx-6PS-65D5-11V 6,700
2m H4 0.6 to 12 20 70GFxx-8PS-20D2-12V 4H81 60 25 7,480
30 70GFxx-8PS-30D3-12V [46.0] 7,920
70GFxx-8PS-..D4-12V -
85 1Bm H2 0.4 to 8 26 85GFxx-6PS-26D2-8V 4H81 60 25 5,490
39 85GFxx-6PS-39D3-8V [46.0] 5,930
52 85GFxx-6PS-52D4-8V 6,420
65 85GFxx-6PS-65D5-8V 6,700
1Am H3 0.4 to 8 20 85GFxx-8PS-20D2-8V 4H81 60 25 7,480
30 85GFxx-8PS-30D3-8V [46.0] 7,920
85GFxx-8PS-..D4-8V -
110 1Bm H2 0.3 to 6 20 110GFxx-8PS-20D2-6V 4H81 60 25 7,480
30 110GFxx-8PS-30D3-6V [46.0] 7,920
110GFxx-8PS-..D4-6V -
SH_26_US.FM
07.08 15
Standard Program Double reeved
Configuration
Configuration
Configuration
("On" per HP HP
Time) hour @ @
fast/ fast/ fpm fpm
1 3m H4+ 40/6.6 20 1GAxx-2PD-20D2-20T H 33 50/20 180/360 5.5 BM 330 19 SH .6 / .15 595 135 TR .6 / .15 675 160
36 1GAxx-2PD-36D3-20T [4.9/.7] TM 355 20 SH 630 136 695
2m H4 40/6.6 78 1GBxx-1PD-78D3-40T H 42 40/20 120/240 7 BM 465 21 UH 895 -
[7.8/ TM 22
1.3]
2 2m H4 20/3.3 18 2GBxx-2PD-18D2-40T H 42 40/20 120/240 7 BM 430 21 SH .6 / .15 685 137 TR .6 / .15 770 161
34 2GBxx-2PD-34D3-40T [7.8/ TM 465 22 SH 745 138 815
1.3]
3 2m H4 20/3.3 18 3GBxx-2PD-18D2-20T H 42 40/20 120/240 7 BM 430 21 SH .6 / .15 685 139 TR .6 / .15 770 161
34 3GBxx-2PD-34D3-20T [7.8/ TM 465 22 SH 745 140 815
1.3]
2m H4 48/8.0 42 3GCxx-1PD-42D2-48T H 71 40/20 150/300 9 BM 1,025 25 1,245 -
78 3GCxx-1PD-78D3-48T [15.5/ TM 1,040 26 1,335
2.4]
170 3GCxx-1PD-170D4-48T 1,170 1,545
5 2m H4 25/4.1 21 5GCxx-2PD-21D2-25T H 71 40/20 150/300 9 BM 915 23 SH .6 / .15 1,630 141 TR .6 / .15 1,590 162
39 5GCxx-2PD-39D3-25T [15.5/ TM 980 24 SH 1,720 142 1,630
2.4]
85 5GCxx-2PD-85D4-25T 1,115 SH 2,085 143 1,820
7.5 1Am H3 25/4.1 21 7.5GCxx-2PD-21D2-25T H 71 40/20 150/300 9 BM 915 25 SH .9 / .2 1,630 144 TR .9 / .2 1,590 163
39 7.5GCxx-2PD-39D3-25T [15.5/ TM 980 26 SH 1,720 145 1,630
2.4]
85 7.5GCxx-2PD-85D4-25T 1,115 - - 1,820
10 2m H4 20/3.3 20 10GExx-2PD-20D2-20T H 71 40/20 150/300 12.5 BM 1,885 28 SH 2.0 / .5 3,100 146 TR 2.0 / .5 2,670 165
41 10GExx-2PD-41D3-20T [15.5/ 2,050 SH 3,495 148 2,800
2.4]
93 10GExx-2PD-93D4-20T 2,560 SH 4,135 150 3,320
146 10GExx-2PD-146D5-20T 2,810 - - 3,860
2m H4 32/5.3 20 10GExx-2PD-20D2-32T H 72 40/20 120/240 12.5 BM 1,940 28 SH 2.0 / .5 3,130 147 TR 2.0 / .5 2,725 165
41 10GExx-2PD-41D3-32T [25.3/ 2,105 SH 3,530 149 2,855
3.9]
93 10GExx-2PD-93D4-32T 2,615 SH 4,170 151 3,375
146 10GExx-2PD-146D5-32T 2,870 - - 3,915
3m H4+ 20/3.3 21 10GExx-4PD-21D3-20T H 71 40/20 150/300 12.5 BM 5,690 29 TR 2.0 / .5 6,440 167
47 10GExx-4PD-47D4-20T [15.5/ 6,770 7,530
73 10GExx-4PD-73D5-20T 2.4] 7,320 8,370
47 10GExx-4PD-47D4-32T [25.3/ 6,820 7,580
73 10GExx-4PD-73D5-32T 3.9] 7,370 8,410
15 1Am H3 20/3.3 20 15GExx-2PD-20D2-20T H 72 40/20 120/240 12.5 BM 1,940 28 SH 2.0 / .5 3,130 152 TR 2.0 / .5 2,725 165
41 15GExx-2PD-41D3-20T [25.3/ 2,105 SH 3,530 154 2,855
93 15GExx-2PD-93D4-20T 3.9] 2,615 SH 4,170 156 3,375
146 15GExx-2PD-146D5-20T 2,870 - - 3,915
1Am H3 32/5.3 20 15GExx-2PD-20D2-32T H 73 40/20 120/240 12.5 BM 1,985 28 SH 2.0 / .5 3,200 153 TR 2.0 / .5 2,770 165
41 15GExx-2PD-41D3-32T [39.4/ 2,150 SH 3,595 155 2,900
6.3]
93 15GExx-2PD-93D4-32T 2,660 SH 4,235 157 3,420
146 15GExx-2PD-146D5-32T 2,910 - - 3,960
47 15GExx-4PD-47D4-12T [15.5/ 6,770 7,530
2.4]
73 15GExx-4PD-73D5-12T 7,320 8,370
47 15GExx-4PD-47D4-20T [25.3/ 6,820 7,580
3.9]
73 15GExx-4PD-73D5-20T 7,370 8,410
47 15GExx-4PD-47D4-32T [39.4/ 6,730 7,490
6.3]
73 15GExx-4PD-73D5-32T 7,500 8,550
SH_26_US.FM
16 07.08
Double reeved Standard Program
Configuration
Configuration
Configuration
("On" per HP HP
Time) hour @ @
fast/ fast/ fpm fpm
20 2m H4 16/2.6 20 20GExx-4PD-20D3-16T H 72 40/20 120/240 12.5 BM 5,730 29 TR 3.3 / .8 6,490 167
46 20GExx-4PD-46D4-16T [25.3/ 6,820 7,580
3.9]
73 20GExx-4PD-73D5-16T 7,370 8,410
2m H4 25/4.2 20 20GExx-4PD-20D3-25T H 73 40/20 120/240 12.5 BM 5,870 29 TR 3.3 / .8 6,620 167
46 20GExx-4PD-46D4-25T [39.4/ 6,730 7,490
6.3]
73 20GExx-4PD-73D5-25T 7,500 8,550
3m H4+ 25/4.1 21 20GFxx-4PD-21D2-25T H 73 40/20 120/240 20 BM 4,180 31 TR 2.0 / .5 7,210 170
33 20GFxx-4PD-33D3-25T [39.4/ 4,600 7,700
6.3]
44 20GFxx-4PD-44D4-25T 5,100 8,930
25 2m H4 12/2.0 20 25GExx-4PD-20D3-12T H 72 40/20 120/240 12.5 BM 5,730 29 TR 3.3 / .8 6,490 167
46 25GExx-4PD-46D4-12T [25.3/ 6,820 7,580
3.9]
73 25GExx-4PD-73D5-12T 7,370 8,410
2m H4 20/3.3 20 25GExx-4PD-20D3-20T H 73 40/20 120/240 12.5 BM 5,870 29 TR 3.3 / .8 6,620 167
46 25GExx-4PD-46D4-20T [39.4/ 6,730 7,490
6.3]
73 25GExx-4PD-73D5-20T 7,500 8,550
33 25GFxx-4PD-33D3-20T [39.4/ 4,600 7,700
6.3]
44 25GFxx-4PD-44D4-20T 5,100 8,930
3m H4+ 2.5 to 25 21 25GFxx-4PD-21D2-25V 4H81 60 20 BM 4,460 31 TR 3.3 / .8 7,430 170
33 25GFxx-4PD-33D3-25V [46.0] 4,880 7,920
44 25GFxx-4PD-44D4-25V 5,380 9,150
30 1Am H3 10/1.6 20 30GExx-4PD-20D3-10T H 72 40/20 120/240 12.5 BM 5,730 29 TR 3.3 / .8 6,490 167
46 30GExx-4PD-46D4-10T [25.3/ 6,820 7,580
3.9]
73 30GExx-4PD-73D5-10T 7,370 8,410
1Am H3 16/2.6 20 30GExx-4PD-20D3-16T H 73 40/20 120/240 12.5 BM 5,870 29 TR 3.3 / .8 6,620 167
46 30GExx-4PD-46D4-16T [39.4/ 6,730 7,490
6.3]
73 30GExx-4PD-73D5-16T 7,500 8,550
1Am H3 2 to 20 20 30GExx-4PD-20D3-20V 4H81 60 12.5 BM 6,150 29 TR 3.3 / .8 6,900 167
46 30GExx-4PD-46D4-20V [46.0] 7,010 7,490
73 30GExx-4PD-73D5-20V 7,780 9,210
33 30GFxx-4PD-33D3-16T [39.4/ 4,600 7,700
6.3]
44 30GFxx-4PD-44D4-16T 5,100 8,930
3m H4+ 2 to 20 21 30GFxx-4PD-21D2-20V 4H81 60 20 BM 4,460 31 TR 2.0 / .5 7,430 170
33 30GFxx-4PD-33D3-20V [46.0] 4,880 7,920
44 30GFxx-4PD-44D4-20V 5,380 9,150
35 2m H4 16/2.6 21 35GFxx-4PD-21D2-16T H 73 40/20 120/240 20 BM 4,180 31 TR 2.0 / .5 7,210 170
33 35GFxx-4PD-33D3-16T [39.4/ 4,600 7,700
6.3]
44 35GFxx-4PD-44D4-16T 5,100 8,930
2m H4 2 to 20 21 35GFxx-4PD-21D2-20V 4H81 60 20 BM 4,460 31 TR 2.0 / .5 7,430 170
33 35GFxx-4PD-33D3-20V [46.0] 4,880 7,920
44 35GFxx-4PD-44D4-20V 5,380 9,150
40 2Am H4 12/2.0 21 40GFxx-4PD-21D2-12T H 73 40/20 120/240 20 BM 4,180 31 TR 3.3 / .8 7,210 170
33 40GFxx-4PD-33D3-12T [39.4/ 4,600 7,700
6.3]
44 40GFxx-4PD-44D4-12T 5,100 8,930
2m H4 1.5 to 15 21 40GFxx-4PD-21D2-16V 4H81 60 20 BM 4,460 31 TR 3.3 / .8 7,430 170
33 40GFxx-4PD-33D3-16V [46.0] 4,880 7,920
44 40GFxx-4PD-44D4-16V 5,380 9,150
SH_26_US.FM
07.08 17
Standard Program Double reeved
Configuration
Configuration
Configuration
("On" per HP HP
Time) hour @ @
fast/ fast/ fpm fpm
50 1Bm H2 10/1.6 21 50GFxx-4PD-21D2-10T H 73 40/20 120/240 20 BM 4,180 31 TR 5.2 / 1.4 7,210 171
33 50GFxx-4PD-33D3-10T [39.4/ 4,600 7,700
6.3]
44 50GFxx-4PD-44D4-10T 5,100 8,930
1Bm H2 .6 to 12 21 50GFxx-4PD-21D2-12V 4H81 60 20 BM 4,460 31 TR 5.2 / 1.4 7,430 171
33 50GFxx-4PD-33D3-12V [46.0] 4,880 7,920
44 50GFxx-4PD-44D4-12V 5,380 9,150
2m H4 10/1.6 21 50GFxx-5PD-21D2-10T H 73 40/20 120/240 16 BM 4,260 31 TR 5.2 / 1.4 7,290 172
33 50GFxx-5PD-33D3-10T [39.4/ 4,680 7,780
6.3]
45 50GFxx-5PD-45D4-10T 5,180 9,010
2m H4 1.3 to 13 21 50GFxx-5PD-21D2-13V 4H81 60 BM 4,540 31 TR 5.2 / 1.4 7,510 172
33 50GFxx-5PD-33D3-13V [46.0] 4,960 8,000
45 50GFxx-5PD-45D2-13V 5,460 9,230
SH_26_US.FM
18 07.08
Frame size A
Base mounted
1 5/8
1 5/8
2 7/8 3 3/4
6 1/2
Ø.669
A 6x M16-8.8
7 7/8
7 7/8
6x S16 *5
11
11
6x S16 *5
9
1
6
A 1 2 3/16 6x M16-8
Ø.6
c0620b29us e12 2 3/4
e1
e1 4.961
28 1/2 7 1/4
11
6 1/4
ØD
9
F *6 e6
*4 eA 21 3/8
e7 e3 e4
C
e10
hH
z
tH
2PS (2/1) 4PS (4/1) 2PD (4/2-1) 2PS (2/1) 4PS (4/1) 2PD (4/2-1) 2PS (2/1) 4PS (4/1) 2PD (4/2-1)
C 15 1/2 16 3/4 10 3/8 e4 e12
e1 -D2 9 1/8 4 5/8 0 -D2 24 3/16
-D2 40 7/8 -D3 15 1/4 7 5/8 0 -D3 35 13/16
-D3 52 1/2 e6 5 3/8 4 3/4 5 3/8 eA
e3 e7 13 7/8 -D2 22 1/8
-D2 3 1/2 6 3/8 12 5/8 e10 13 7/8 11 1/2 9 1/2 -D3 33 3/4
-D3 3 1/4 6 1/8 18 1/2 ØD 7 mm 7 mm 5.5 mm
z 1 1/4 1 5/8 1 1/4
The customer's substructure must take up the Rope departure angles and angles of installation
moment MT from the rope drum. see A100 and A101.
Therefore it must be torsion resistant and level,
(max. permissible offset 0.079).
*4 Keep this dimension as small as possible
.079
c1008a01us
*5 Lock washer (Schnorr)
MT = 0.5 x F*6 x 4.96 max. 0.5° *6 Traction on drum
SH_36_US.FM
Notes:
These are typical dimensions for the standard cataloque unit.
Dimensions shown are in inches unless otherwise noted.
07.08 19
Frame size A
Top mounted
2 3/16 1 1 2 3/16
6 7/8
B 8 x M16-8
8 x S16 *5
1 9/16
7 7/8
7 7/8
11 3/8
11 3/8
8 x S16 *5
Ø.6
3 3/4 B 3 3/4 8 x M16-8.8
69
Ø.669
e12 2 3/4
c0620c29us
e1
e7 e3 *4
4.961
7 1/4
6 1/4
28 1/2 12 1/4
9 3/8
C1
F *6 e6
e1
21 3/4
e4
hH
e10
z
tH
C1 28 1/8 29 3/8 23 e4 e12
e1 -D2 9 1/8 4 5/8 0 -D2 24 3/16
-D2 40 7/8 -D3 15 1/4 7 5/8 0 -D3 35 13/16
-D3 52 1/2 e6 5 3/4 5 1/8 5 3/4 eA
e3 e7 13 7/8 -D2 22 1/8
-D2 3 1/2 6 3/8 12 5/8 e10 13 7/8 11 1/2 9 1/2 -D3 33 3/4
-D3 3 1/4 6 1/8 18 1/2 ØD 7 mm 7 mm 5.5 mm
z 1 1/4 1 5/8 1 1/4
.079
c1008a01us
SH_36_US.FM
Notes:
20 07.08
Frame size B
Base mounted
1 5/8
1 5/8
3 3/4 3 3/4
7 7/8
Ø.827
10 1/4
13 5/8
6x M20-8.8
10 1/4
A
13 5/8
6x S20 *5
7
6x S20 *5
2
1 A
Ø.8
1 2 3/16
6x M20-8
c0620b28us
e12 2 3/4
e1
e1 6.575
31 1/4 8 13/16
12 7/8
7 1/8
ØD
11 1/8
F *6 e6
*4 eA 22
e7 e3 e4
C
e10
hH
z
tH
1PS 2PS 4PS 1PD 2PD 1PS 2PS 4PS 1PD 2PD 1PS 2PS 4PS 1PD 2PD
(1/1) (2/1) (4/1) (2/2-1) (4/2-1) (1/1) (2/1) (4/1) (2/2-1) (4/2-1) (1/1) (2/1) (4/1) (2/2-1) (4/2-1)
C 17 1/4 18 1/2 18 7/8 16 3/4 13 3/8 e4 e12
e1 -D2 17 1/4 8 5/8 4 3/8 0 0 -D2 24 3/16
-D2 41 1/4 -D3 28 7/8 14 1/2 7 1/4 0 0 -D3 35 13/16
-D3 52 7/8 e6 6 5/8 6 6 5/8 eA
e3 e7 14 1/4 -D2 22 1/8
-D2 3 1/2 3 3/4 6 3/8 12 3/4 12 3/4 e10 12 1/4 17 1/2 13 3/4 11 3/4 11 1/2 -D3 33 3/4
-D3 3 1/2 3 3/4 6 3/8 18 1/2 18 1/2 ØD 9 mm 9 mm 9 mm 7 mm 7 mm
z 1 3/8 1 5/8 1 5/8 1 3/8 1 5/8
.079
c1008a01us
SH_36_US.FM
Notes:
07.08 21
Frame size B
Top mounted
1 3/8
1 3/8
2 3/16 1 1 2 3/16
8 1/8
8 x M20-8
2 3/16
B
13 3/8
10 1/4
10 1/4
13 3/8
8 x S20 *5
8 x S20 *5
4 1/4
Ø.8
B 3 3/4 8 x M20-8.8
e12 27 2 3/4 Ø.827
c0620c28us
e1
e7 e3 *4
6.575
8 7/8
7 1/8
31 1/4 14 1/2 11 3/8
C1
F *6 e6
e1 22 1/8
e4
hH
e10
tH z
(1/1) (2/1) (4/1) (2/2-1) (4/2-1) (1/1) (2/1) (4/1) (2/2-1) (4/2-1) (1/1) (2/1) (4/1) (2/2-1) (4/2-1)
C1 31 5/8 32 7/8 33 1/4 31 1/8 27 3/4 e4 e12
e1 -D2 17 1/4 8 5/8 4 3/8 0 0 -D2 24 3/16
-D2 41 1/4 -D3 28 7/8 14 1/2 7 1/4 0 0 -D3 35 13/16
-D3 52 7/8 e6 6 7/8 6 1/8 6 7/8 eA
e3 e7 14 1/4 -D2 22 1/8
-D2 3 1/2 3 3/4 6 3/8 12 3/4 12 3/4 e10 12 1/4 17 1/2 13 3/4 11 3/4 11 1/2 -D3 33 3/4
-D3 3 1/2 3 3/4 6 3/8 18 1/2 18 1/2 ØD 9 mm 9 mm 9 mm 7 mm 7 mm
z 1 3/8 1 5/8 1 5/8 1 3/8 1 5/8
.079
c1008a01us
SH_36_US.FM
Notes:
22 07.08
Frame size C
Base mounted
3 3/4 5 1/8
9 3/4
Ø.984
A 6x M24-8.8
6x S24 *5
11
16
11
15
6x S24 *5
4 8
1 1/8 A
Ø.9
1 1/8 2 1/16 6x M24-8
c0620b27us e12 4
e1
e1 8.622
39 1/4 11 3/4
16 7/8
9 1/2
ØD
14 1/8
F *6 e6
*4 eA 28 5/8
e7 e3 e4
C
e10
hH
z
tH
2PS 4PS 2PD 2PS 4PS 2PD 2PS 4PS 2PD

(2/1) (4/1) (4/2-1) (2/1) (4/1) (4/2-1) (2/1) (4/1) (4/2-1)
C e4 e12
-D2 21 1/2 24 5/8 13 5/8 -D2 9 3/8 4 5/8 0 -D2 26 3/4
-D3 -D3 15 1/2 7 3/4 0 -D3 39 3/16
-D4 30 1/2 24 5/8 13 5/8 -D4 31 15 1/2 0 -D4 70 1/16
e1 48 e6 8 3/8 7 1/2 8 3/8 eA
-D2 60 3/8 e7 17 1/4 -D2 24 5/8
-D3 91 3/8 e10 21 5/8 18 1/4 13 3/4 -D3 37
-D4 -D4 67 7/8
e3 ØD 12.5 mm 12.5 mm 9 mm
-D2 4 7/8 9 1/2 14 3/8 z 1 5/8 1 7/8 1 5/8
-D3 4 7/8 9 1/2 20 1/2
-D4 4 7/8 9 1/2 36
.079
c1008a01us
SH_36_US.FM
Notes:
07.08 23
Frame size C
Top mounted
2 15/16 1 1/8 1 1/8 2 15/16
9 3/4
B 8 x M24-8
2 15/16
8 x S24 *5
15 1/2
15 1/2
11
11
8 x S24 *5
8 x M24-8.8
.9 8
B 5 1/8
4
5 1/8 Ø.984
e12 4
c0620d27us
e1
e7 e3 *4
8.622
11 3/4
9 1/2
18 5/8
39 1/4
C1
14 1/8
F *6 e6
e1
28 5/8
e4
hH
e10
z
tH
2PS 4PS 2PD 2PS 4PS 2PD 2PS 4PS 2PD

(2/1) (4/1) (4/2-1) (2/1) (4/1) (4/2-1) (2/1) (4/1) (4/2-1)
C1 e4 e12
-D2 40 3/8 43 1/8 32 1/2 -D2 9 3/8 4 5/8 0 -D2 26 3/4
-D3 -D3 15 1/2 7 3/4 0 -D3 39 3/16
-D4 49 3/8 43 1/8 32 1/2 -D4 31 15 1/2 0 -D4 70 1/16
e1 48 e6 8 3/8 7 1/2 8 3/8 eA
-D2 60 3/8 e7 17 1/4 -D2 24 5/8
-D3 91 3/8 e10 21 5/8 18 1/4 13 3/4 -D3 37
-D4 -D4 67 7/8
e3 ØD 12.5 mm 12.5 mm 9 mm
-D2 4 7/8 9 1/2 14 3/8 z 1 5/8 1 7/8 1 5/8
-D3 4 7/8 9 1/2 20 1/2
-D4 4 7/8 9 1/2 36
.079
c1008a01us
SH_36_US.FM
Notes:
24 07.08
Frame size C
Base mounted
3 3/4 5 1/8
9 3/4
Ø.984
A 6x M24-8.8
6x S24 *5
11
16
11
15
6x S24 *5
4
8
1 1/8 A
Ø.9
1 1/8 2 1/16 6x M24-8
c0620c27us e12 4
e1
e1 8.622
45 11 3/4
16 7/8
9 1/2
ØD
14 1/8
F *6 e6
*4 eA 28 5/8
e7 e3 e4
C
e10
hH
z
tH
(1/1) (2/1) (4/1) (2/2-1) (4/2-1) (1/1) (2/1) (4/1) (2/2-1) (4/2-1) (1/1) (2/1) (4/1) (2/2-1) (4/2-1)
C e4 e12
-D2 22 3/8 21 1/2 26 18 1/2 13 5/8 -D2 18 5/8 9 3/8 4 5/8 0 0 -D2 26 3/4
-D3 -D3 31 15 1/2 7 3/4 0 0 -D3 39 3/16
-D4 22 3/8 32 1/2 26 18 1/2 13 5/8 -D4 61 7/8 31 15 1/2 0 0 -D4 70 1/16
e1 e6 14 1/8 8 3/8 7 1/2 14 1/8 8 3/8 eA
-D2 48 e7 17 1/4 -D2 24 5/8
-D3 60 3/8 e10 17 1/2 21 5/8 19 5/8 14 5/8 13 3/4 -D3 37
-D4 91 3/8 -D4 67 7/8
e3 ØD 12.5 12.5 12.5 9 mm 9 mm
-D2 4 7/8 4 7/8 9 1/2 14 3/8 14 3/8 mm mm mm
-D3 4 7/8 4 7/8 9 1/2 20 1/2 20 1/2 z 1 3/4 1 5/8 2 1/8 1 3/4 1 5/8
-D4 4 7/8 4 7/8 9 1/2 36 36
.079
c1008a01us
SH_36_US.FM
Notes:
07.08 25
Frame size C
Top mounted
2 15/16 1 1/8 1 1/8 2 15/16
9 3/4
B 8 x M24-8
2 15/16
8 x S24 *5
15 1/2
15 1/2
11
11
8 x S24 *5
8 x M24-8.8
.9 8
B 5 1/8
4
5 1/8 e12 Ø.984
4
c0620e27us
e1
e7 e3 *4
8.622
11 3/4
9 1/2
18 5/8
45
C1
14 1/8
F *6 e6
e1
28 5/8
e4
hH
e10
z
tH
1PS 2PS 1PD 2PD 1PS 2PS 1PD 2PD 1PS 2PS 1PD 2PD
(1/1) (2/1) (2/2-1) (4/2-1) (1/1) (2/1) (2/2-1) (4/2-1) (1/1) (2/1) (2/2-1) (4/2-1)
C1 e4 e12
-D2 41 1/4 40 3/8 37 3/8 32 1/2 -D2 18 5/8 9 3/8 0 0 -D2 26 3/4
-D3 -D3 31 15 1/2 0 0 -D3 39 3/16
-D4 42 7/8 49 3/8 37 3/8 32 1/2 -D4 61 7/8 31 0 0 -D4 70 1/16
e1 e6 14 1/8 8 3/8 14 1/8 8 3/8 eA
-D2 48 e7 17 1/4 -D2 24 5/8
-D3 60 3/8 e10 17 1/2 21 5/8 14 5/8 13 3/4 -D3 37
-D4 91 3/8 -D4 67 7/8
e3 ØD 12.5 mm 12.5 mm 9 mm 9 mm
-D2 4 7/8 4 7/8 14 3/8 14 3/8 z 1 3/4 1 5/8 1 3/4 1 5/8
-D3 4 7/8 4 7/8 20 1/2 20 1/2
-D4 4 7/8 4 7/8 36 36
.079
c1008a01us
SH_36_US.FM
Notes:
26 07.08
Frame size D
Base mounted
e2
Ø1.339
4x M30-8.8
A
36 3/8
4x S30 *5
16 1/8
A
4x S30 *5
9
Ø1.33
4x M30-8
2 5/8 2 5/8
2
1 1/4 e12 1 1/4
e1
e1 51 3/4
e2 17 3/4 16 1/2 7 7/8
9 1/2
ØD F *6 c0875a04us
20 3/8 14
36 3/8
eA 2 5/8 e6
e7 e3 e4
C
e10
hH
z
tH
2PS (2/1) 4PS (4/1) 2PS (2/1) 4PS (4/1) 2PS (2/1) 4PS (4/1)
C -D2 27 3/8 24 3/8 e4 -D2 9 1/4 4 5/8 eA -D2 28 3/8 28 3/8
-D3 36 1/4 24 3/8 -D3 15 3/8 7 3/4 -D3 40 1/2 40 1/2
-D4 36 1/4 24 3/8 -D4 30 5/8 15 3/8 -D4 71 3/4 71 1/8
-D5 36 1/4 31 1/4 -D5 46 23 -D5 102 1/2 101 3/4
e1 -D2 54 1/2 e6 12 11 ØD 14 mm 14 mm
-D3 66 5/8 e7 19 1/2 z 1 7/8 2 1/2
-D4 97 1/8 e10 24 23
-D5 127 7/8 e12 -D2 33 11/16
e3 8 5/8 13 1/4 -D3 45 7 /8 Hoist Motor Type
-D4 76 3/8 H71 H72 H73
-D5 107 1 /16 e2 43 1/2 43 1/2 45 1/4
Rope departure angles and angles of installation *5 Lock washer (Schnorr)

on request. *6 Traction on drum
SH_36_US.FM
Notes:
07.08 27
Frame size E
Base mounted 2PS (2/1), 4PS (4/1), 2PD (4/2-1)
e2
Ø1.339
36 3/8
4x M30-8.8
A
4x S30 *5
A
16 1/8
9
Ø1.33
4x S30 *5
4x M30-8
2 5/8 2 5/8
1 1/4 e12 2
1 1/4
e1
e1 51 3/4
e2 16 9/16 7 7/8
18 1/8
9 1/2
ØD F *6 c0875v05us
20 3/8 14
36 3/8
eA 2 5/8 e6
e7 e3 e4
C
e10
hH
z
tH
C -D2 34 7/8 31 1/8 24 e4 -D2 9 1/8 4 5/8 0 eA -D2 28 3/8 28 3/8 28 3/8
-D3 34 7/8 31 1/8 24 -D3 15 1/4 7 5/8 0 -D3 40 1/2 40 1/2 40 1/2
-D4 44 5/8 31 1/8 24 -D4 30 1/2 15 1/4 0 -D4 71 3/4 71 1/8 71 1/8
-D5 44 5/8 31 1/8 24 -D5 45 7/8 23 0 -D5 102 1/2 101 3/4 101 3/4
e1 -D2 54 1/2 e6 12 11 12 ØD 20 mm 20 mm 12.5 mm
-D3 66 5/8 e7 19 1/2 z 2 1/8 3 1/4 2 1/8
-D4 97 1/8 e10 31 5/8 29 3/4 19 5/8
-D5 127 7/8 e12 -D2 33 11/16
e3 -D2 7 1/8 13 3/8 17 3/8 -D3 45 7/8 Hoist Motor Type
-D3 7 1/8 13 3/8 23 1/2 -D4 76 3/8 H71 H72 H73
-D4 7 1/8 13 3/8 38 3/4 -D5 107 1/16 e2 43 1/2 43 1/2 45 1/4
-D5 7 1/8 13 3/8 54 1/8
Rope departure angles and angles of installation *5 Lock washer (Schnorr)

on request. *6 Traction on drum
SH_36_US.FM
Notes:
28 07.08
Frame size E
Base mounted 4PD (8/2-1)
1 1/4
Ø1.339
e2
e1
e12
c1294v01us
2
2 16 1/8
1 1/4
36 3/8
51 3/4
e1 16 1/2 7 7/8
20 3/8 Ø13.957
21 1/4
17 3/4
9 1/2
Ø.492
35
26 7/8
2 eA 2
17 3/8
e3 36 3/8
4PD (8/2-1) 4PD (8/2-1) Hoist Motor Type

e1 -D3 66 5/8 e12 -D3 45 7/8 H71 H72 H73
-D4 97 1/8 -D4 76 3/8 e2 43 1/2 43 1/2 45 1/4
-D5 127 7/8 -D5 107 1/16
e3 -D3 23 5/8 eA -D3 41 7/8
-D4 38 7/8 -D4 72 1/2
-D5 54 1/4 -D5 103 1/8
Rope departure angles and angles of installation

on request.
SH_36_US.FM
Notes:
07.08 29
Frame size F
Base mounted 4PS (4/1)
38 3/4 e1
3/8 13 3/8 18 1/8 6 7/8 e3
21 3/8
11
ØD X
2 3/4 17 1/4
8 1/4 c1588v01us eA
18 1/4
C e 12
“X” e4
3 7/8
z 39 3/4
hH
4 5/8 tH
13 3/8
31 1/2
c1589v01us
1/2
16.693 a
a
10 7/8
3 7/8 1/2
a
a
a = Ø1.299
e 12 3 7/8
a1 24 3/4
a1 a1
24 3/4 a = Ø1.299
M30-8
S30 *5
c0295a05us
M30-8.8
4PS (4/1) 4PS (4/1) Hoist Motor Type

C 41 3/4 e12 -D1 34 5/8 2/12H73 4H73 4H81
e3 -D1 32 2/4 -D2 50 13/16 e1
-D2 48 5/8 -D4 89 -D1 85 3/4 87 3/8 88 7/8
-D4 87 1/4 eA -D1 31 2/4 -D2 101 7/8 103 2/4 105
e4 -D1 5 5/8 -D2 47 5/8 -D4 140 1/8 141 5/8 143 1/4
-D2 9 3/4 -D4 85 7/8
-D4 14 7/8 ØD 25 mm
z 4 5/8
E = Electrical installation *5 Lock washer (Schnorr)

SH_36_US.FM
Notes:
30 07.08
Frame size F
Base mounted 4PD (8/2-1), 5PD (10/2-1)
31 7/8 e1
13 1/2
18 e3
E
21 3/8
10 5/8
9 7/8 ØD X
e6
c1593v01us eA
C 18 1/4
e 12
“X” 3 7/8 0
z
41 3/8
hH
1 3/4 tH
18 1/8
31 1/2
1/2
c1595v01us
16.575 a
a
10 7/8
3 7/8 1/2
a
a = Ø1.299 a
e 12 3 7/8
a1 24 3/4
a1 a1
24 3/4 a = Ø1.299
M30-8
S30 *5
c0295a05us
M30-8.8
4PD (8/2-1) 5PD (10/2-1) 4PD (8/2-1) 5PD (10/2-1) Hoist Motor Type
C 43 1/4 74 3/4 eA -D2 47 5/8 2/12H73 4H73 4H81
e3 -D2 36 3/4 -D3 66 7/8 e1
-D3 46 -D4 85 7/8 -D2 101 7/8 103 2/4 105
-D4 55 3/8 ØD 20 mm 16 mm -D3 121 1/8 122 3/4 124 3/8
e6 25 3/8 26 3/8 z 4 5/8 -D4 140 1/8 141 5/8 143 1/4
e12 -D2 50 13/16
-D3 70 1/16
-D4 89
E = Electrical installation *5 Lock washer (Schnorr)

SH_36_US.FM
Notes:
07.08 31
1GASH-2PS-39D2-40T Monorail
Single reeved
*1
*1
Capacity 1 ton Hoist Motor Type 2/12 H33 Headroom C depends on Flange B
Hoist Motor 4.9/.7 HP Flange B Headroom C
2 Speed Trolley 80/20 fpm 3 1/2 19 1/4
Lift 39’ Trolley Motor .6/.15 HP 4 1/2 19 1/4
Standard Flange Width 3 1/2 - 12 6 1/2 18 1/2
Reeving 2 PS (2/1) Min. Radius * 37’ 8 19 1/2
Rope Diameter 7 mm Max. Flange Thickness 7/8 12 21 1/4
Duty Class H4+ (FEM 3m) Max. Wheel Load / Pair 1600 lbs 16 24 1/4
2 Speed Hoist 40/6.6 fpm Weight 585 lbs 19 5/8 27
* Up to flange B = 8
*1 Further information see page 186 (B080)
SH_46_US.FM
Notes:
32 07.08
Monorail 1GASH-2PS-66D3-40T
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 33
Single reeved
*1
*1
Capacity 2 tons Hoist Motor Type 2/12 H33 Headroom C depends on Flange B
Standard Flange Width 3 1/2 - 12 6 1/2 16
Duty Class H4+ (FEM 3m) Max. Wheel Load / Pair 2530 lbs 16 22
2 Speed Hoist 20/3.3 fpm Weight 620 lbs 19 5/8 24 1/2
SH_46_US.FM
Notes:
34 07.08
Single reeved
*1
*1
Duty Class H4+ (FEM 3m) Max. Wheel Load / Pair 3070 lbs 16 22
SH_46_US.FM
Notes:
07.08 35
2GBSH-2PS-39D2-40T Monorail
Single reeved
*1
*1
Hoist Motor 7.8/1.3 HP Flange B Headroom C
2 Speed Trolley 80/20 fpm 3 1/2 25
Lift 39’ Trolley Motor .6/.15 HP 4 1/2 25
Reeving 2 PS (2/1) Min. Radius * 37’ 8 24
Rope Diameter 9 mm Max. Flange Thickness 1 12 23
Duty Class H4 (FEM 2m) Max. Wheel Load / Pair 2900 lbs 16 25 1/2
SH_46_US.FM
Notes:
36 07.08
Monorail 2GBSH-2PS-66D3-40T
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 37
Single reeved
*1
*1
Duty Class H4 (FEM 2m) Max. Wheel Load / Pair 3640 lbs 16 22
SH_46_US.FM
Notes:
38 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 39
Single reeved
*1
*1
SH_46_US.FM
Notes:
40 07.08
Monorail 3GCSH-2PS-39D2-40T
Single reeved
*1
*1
Lift 39’ Trolley Motor .6/.15 HP 7 26
Standard Flange Width 4 5/8 - 12 12 26
Rope Diameter 12.5 mm Max. Flange Thickness 1 3/8 19 5/8 29
Duty Class H4+ (FEM 3m) Max. Wheel Load / Pair 4780 lbs
2 Speed Hoist 40/6.6 fpm Weight 1620 lbs
SH_46_US.FM
Notes:
07.08 41
Single reeved
*1
*1
SH_46_US.FM
Notes:
42 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 43
3GCSH-2PS-131D4-40T Monorail
Single reeved
*1
*1
SH_46_US.FM
Notes:
44 07.08
Single reeved
*1
*1
Rope Diameter 9 mm Max. Flange Thickness 1 12 19 3/8
SH_46_US.FM
Notes:
07.08 45
Single reeved
*1
*1
Lift 20’ Trolley Motor .6/.15 HP 7 23 5/8
Rope Diameter 12.5 mm Max. Flange Thickness 1 3/8 19 5/8 25 3/4
SH_46_US.FM
Notes:
46 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 47
Single reeved
*1
*1
SH_46_US.FM
Notes:
48 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 49
Single reeved
*1
*1
Duty Class H4 (FEM 2m) Max. Wheel Load / Pair 7550 lbs
SH_46_US.FM
Notes:
50 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 51
5GDSH-2PS-56D2-40T Monorail
Single reeved
*1
*1
Rope Diameter 14 mm Max. Flange Thickness 1 3/4 19 5/8 33
SH_46_US.FM
Notes:
52 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 53
Single reeved
*1
*1
SH_46_US.FM
Notes:
54 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 55
Single reeved
*1
*1
SH_46_US.FM
Notes:
56 07.08
Monorail 5GDSH-2PS-93D3-40T
Single reeved
*1
*1
Standard Flange Width 4 7/8 - 12 12 44 1/2
Rope Diameter 14 mm Max. Flange Thickness 1 3/4 19 5/8 42 1/2
SH_46_US.FM
Notes:
07.08 57
Single reeved
*1
*1
SH_46_US.FM
Notes:
58 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 59
Single reeved
*1
*1
SH_46_US.FM
Notes:
60 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 61
7.5GBSH-4PS-20D2-16T Monorail
Single reeved
*1
*1
Capacity 7.5 tons Hoist Motor Type 2/12 H42 Headroom C depends on Flange B
SH_46_US.FM
Notes:
62 07.08
Monorail 7.5GCSH-4PS-20D2-20T
Single reeved
*1
*1
Lift 20’ Trolley Motor 0.9/0.2 HP 7 23 5/8
SH_46_US.FM
Notes:
07.08 63
7.5GCSH-4PS-20D2-32T Monorail
Single reeved
*1
*1
SH_46_US.FM
Notes:
64 07.08
Monorail 7.5GBSH-4PS-33D3-16T
Single reeved
*1
*1
Standard Flange Width 3 1/2 - 12 6 1(2 20 1/2
SH_46_US.FM
Notes:
07.08 65
Single reeved
*1
*1
SH_46_US.FM
Notes:
66 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 67
Single reeved
*1
*1
SH_46_US.FM
Notes:
68 07.08
Monorail 7.5GDSH-2PS-56D2-40T
Single reeved
*1
*1
Lift 56’ Trolley Motor 0.9/0.2 HP 6 3/4 32
SH_46_US.FM
Notes:
07.08 69
Single reeved
*1
*1
SH_46_US.FM
Notes:
70 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 71
Single reeved
*1
*1
SH_46_US.FM
Notes:
72 07.08
Monorail 7.5GDSH-2PS-93D3-40T
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 73
7.5GDSH-2PS-186D4-40T Monorail
Single reeved
*1
*1
SH_46_US.FM
Notes:
74 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 75
Single reeved
*1
*1
SH_46_US.FM
Notes:
76 07.08
Single reeved
*1
*1
Lift 28’ Trolley Motor 2.0/0.5 HP 6 3/4 29 1/2
SH_46_US.FM
Notes:
07.08 77
Single reeved
*1
*1
SH_46_US.FM
Notes:
78 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 79
Single reeved
*1
*1
SH_46_US.FM
Notes:
80 07.08
Monorail 10GESH-2PS-39D2-32T
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 81
Single reeved
*1
*1
SH_46_US.FM
Notes:
82 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 83
10GESH-2PS-65D3-32T Monorail
Single reeved
*1
*1
SH_46_US.FM
Notes:
84 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 85
Single reeved
*1
*1
SH_46_US.FM
Notes:
86 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 87
Single reeved
*1
*1
SH_46_US.FM
Notes:
88 07.08
Monorail 10GESH-2PS-131D4-32T
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 89
Single reeved
*1
*1
SH_46_US.FM
Notes:
90 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 91
15GEUH-4PS-20D2-20T Monorail
Single reeved
*1
*1
Capacity 15 tons Hoist Motor Type 2/12 H72 Headroom C 56

Hoist Motor 25.3/3.9 HP
2 Speed Trolley 80/20 fpm
Lift 20’ Trolley Motor 2 x 0.9/0.2 HP
Standard Flange Width 7 1/2 - 12
Reeving 4 PS (4/1) Min. Radius NA
Rope Diameter 20 mm Max. Flange Thickness 1 3/4
SH_46_US.FM
Notes:
92 07.08
Monorail 15GEUH-4PS-20D2-32T
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 93
Single reeved
*1
*1
SH_46_US.FM
Notes:
94 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 95
Single reeved
*1
*1
SH_46_US.FM
Notes:
96 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 97
Single reeved
*1
*1
SH_46_US.FM
Notes:
98 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 99
Single reeved
*1
*1

SH_46_US.FM
Notes:
100 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 101
Single reeved
*1
*1
SH_46_US.FM
Notes:
102 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 103
Single reeved
*1
*1

SH_46_US.FM
Notes:
104 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 105
Single reeved
*1
*1
SH_46_US.FM
Notes:
106 07.08
Single reeved
*1
*1
SH_46_US.FM
Notes:
07.08 107
Single reeved
*1
*1
SH_46_US.FM
Notes:
108 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 109
Single reeved
*1
*1

SH_46_US.FM
Notes:
110 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 111
Single reeved
*1
*1

SH_46_US.FM
Notes:
112 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 113
Single reeved
*1
*1

SH_46_US.FM
Notes:
114 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 115
Single reeved
*1
*1

SH_46_US.FM
Notes:
116 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 117
Single reeved
*1
*1

SH_46_US.FM
Notes:
118 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 119
Single reeved
*1
*1

SH_46_US.FM
Notes:
120 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 121
Single reeved
*1
*1

SH_46_US.FM
Notes:
122 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 123
Single reeved
*1
*1

SH_46_US.FM
Notes:
124 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 125
25GEUH-4PS-96D5-20P Monorail
Single reeved
*1
*1

SH_46_US.FM
Notes:
126 07.08
Single reeved
*1
*1

Duty Class H3 (FEM 1Am) Max. Wheel Load / Pair 17300 lbs
SH_46_US.FM
Notes:
07.08 127
Single reeved
*1
*1

SH_46_US.FM
Notes:
128 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 129
Single reeved
*1
*1

SH_46_US.FM
Notes:
130 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 131
Single reeved
*1
*1

SH_46_US.FM
Notes:
132 07.08
Single reeved
*1
*1

SH_46_US.FM
Notes:
07.08 133
Single reeved
*1
*1

SH_46_US.FM
Notes:
134 07.08
Monorail 1GASH-2PD-20D2-20T
Double reeved
*1
*1
Reeving 2 PD (4/2-1) Min. Radius * 37’ 8 16
Rope Diameter 5.5 mm Max. Flange Thickness 7/8 12 18 1/2
SH_46_US.FM
Notes:
07.08 135
1GASH-2PD-36D3-20T Monorail
Double reeved
*1
*1
Rope Diameter 5.5 mm Max. Flange Thickness 7/8 12 18 1/2
SH_46_US.FM
Notes:
136 07.08
Monorail 2GBSH-2PD-18D2-40T
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 137
2GBSH-2PD-34D3-40T Monorail
Double reeved
*1
*1
SH_46_US.FM
Notes:
138 07.08
Monorail 3GBSH-2PD-18D2-20T
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 139
3GBSH-2PD-34D3-20T Monorail
Double reeved
*1
*1
SH_46_US.FM
Notes:
140 07.08
Monorail 5GCSH-2PD-21D2-25T
Double reeved
*1
*1
Reeving 2 PD (4/2-1) Min. Radius * 41’ 12 19 1/2
Rope Diameter 9 mm Max. Flange Thickness 1 3/8 16 22 1/2
Duty Class H4 (FEM 2m) Max. Wheel Load / Pair 7360 lbs 19 5/8 25 1/2
SH_46_US.FM
Notes:
07.08 141
5GCSH-2PD-39D3-25T Monorail
Double reeved
*1
*1
SH_46_US.FM
Notes:
142 07.08
Monorail 5GCSH-2PD-85D4-25T
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 143
7.5GCSH-2PD-21D2-25T Monorail
Double reeved
*1
*1
SH_46_US.FM
Notes:
144 07.08
Monorail 7.5GCSH-2PD-39D3-25T
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 145
10GESH-2PD-20D2-20T Monorail
Double reeved
*1
*1
SH_46_US.FM
Notes:
146 07.08
Monorail 10GESH-2PD-20D2-32T
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 147
Double reeved
*1
*1
SH_46_US.FM
Notes:
148 07.08
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 149
Double reeved
*1
*1
SH_46_US.FM
Notes:
150 07.08
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 151
Double reeved
*1
*1
SH_46_US.FM
Notes:
152 07.08
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 153
Double reeved
*1
*1
SH_46_US.FM
Notes:
154 07.08
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 155
Double reeved
*1
*1
SH_46_US.FM
Notes:
156 07.08
Double reeved
*1
*1
SH_46_US.FM
Notes:
07.08 157
Frame size BUH Monorail
Single/Double reeved
e20
21 2/4 B 3 3/4
9 2/4 u2 (9 2/4)*8 1 3/8
3 3/8 3 3/8 3/4 (7/8)*1
*9 1/4 End stop *9
End stop R1 R2
1 3/4
5 1/8
4
1 1/8
*8
e21
End stop *9
C
u3 e4
u1 e5 c1003a02us
e1 e22
!! *4
5 1/8
Ø4
3/4 (7/8) *1
1 1/8
1 3/8
c0619a18us
1PS (1/1) 1PD (2/2-1) 1PS (1/1) 1PD (2/2-1) 1PS (1/1) 1PD (2/2-1)
C 40 3/4 40 1/8 e22 -D2 5 5/8 u3 -D2 8 1/2 -
e1 -D2 41 1/8 -D3 5 5/8 -D3 8 1/2 23 1/2
-D3 52 3/4 u1 -D2 31 7/8 B* 3 2/4 - 12
e4 -D2 17 1/4 0 -D3 43 1/2 12 1/8 - 19 5/8
-D3 28 7/8 0 u2 -D2 34 U *2
e5 22 1/8 -D3 45 5/8 -D2 57’ *7
e20 9 5/8 -D3 76’ *7
e21 23 3/8
* Standard = 11 3/4 *2 Only up to B < 7 7/8 *7 Smaller radius of bend on request

*1 With tapered flange *4 N.B.: Oberserve clearance dimensions *9 Further information see page 186 (B080)
SH_46_US.FM
Notes:
158 07.08
Monorail Frame size CUH
Single/Double reeved
e20
21 2/4 B 3 3/4
9 2/4 u2 (9 2/4)*8 1 3/8
3 3/8 3 3/8 3/4 (7/8)*1
1/4 End stop *9
End stop *9 R1 R2
1 3/4
5 1/8
4
1 1/8
*8
e21
End stop *9
C
u3 e4
u1 e5 c1003a02us
e1 e22
!! *4
5 1/8
Ø4
3/4 (7/8) *1
1 1/8
1 3/8
c0619a18us
1PS (1/1) 1PD (2/2-1) 1PS (1/1) 1PD (2/2-1) 1PS (1/1) 1PD (2/2-1)
C 52 1/8 46 5/8 e22 -D2 6 u3 -D2 10 5/8 20 1/8
e1 -D2 47 1/4 -D3 6 -D3 10 5/8 26 3/8
-D3 59 5/8 -D4 6 -D4 16 5/8 47 3/4
-D4 90 2/4 u1 -D2 36 3/8 B* 3 2/4 - 12
e4 -D2 18 5/8 0 -D3 49 12 1/8 - 19 5/8
-D3 31 0 -D4 85 7/8 U *2
-D4 61 7/8 0 u2 -D2 38 3/8 -D2 64’ *7
e5 28 5/8 -D3 50 3/4 -D3 85’ *7
e20 14 1/8 -D4 87 5/8 -D4 146’ *7
e21 28
* Standard = 11 3/4 *2 Only up to B < 7 7/8 *7 Smaller radius of bend on request

*1 With tapered flange *4 N.B.: Oberserve clearance dimensions *8 2nd travel drive for frame size CUH-1PS-..D4
SH_46_US.FM
Notes:
07.08 159
Frame size A Double girder
z2 e1 23 1/4
A
X
15
9 1/4
4 1/8
22 1/2 3 1/2 9 3/8 12 1/2 19 6 1/4
2 Spw 2 31 1/2
z1 e4 4 3/4 47 1/8
C
c1472a01us
e10
hH
tH
1 5/8
X A
1 3/4
Ø2
Ø 3 15/16
b max.
2 3/8
≥ 1 1/8
b1* 2 2 3/8
k k 1 1/2 2
b1 * Others on request
2PS 4PS 2PD 2PS 4PS 2PD

(2/1) (4/1) (4/2-1) (2/1) (4/1) (4/2-1)
C 12 3/4 7 1/2 8 1/2 Spw 49 3/16 55 1/8 88 3/16 49 3/16 55 1/8*4 88 3/16 49 3/16 55 1/8 88 3/16
e1 -D2 40 5/8 b D2 7 7/8 9 7/8 9 7/8 7 7/8 9 7/8 9 7/8 7 7/8 9 7/8 9 7/8
-D3 52 1/4 max. D3 - 5 7/8 9 7/8 - 5 7/8 9 7/8 - 7 7/8 9 7/8
e4 -D2 9 1/8 4 5/8 0 z1 D2 18 7/8 21 3/4 38 3/8 21 1/4 24 1/8 40 3/4 28 31 47 1/2
-D3 15 1/4 7 5/8 0 D3 - 15 3/8 37 3/4 - 17 3/4 40 1/8 - 27 1/2 44 1/8
e10 13 7/8 11 1/2 9 1/2 z2 D2 1 1/2 4 1/2 21 1 1/2 4 1/2 21 1 1/2 4 1/2 21
D3 - -1 7/8 20 3/8 - -1 7/8 20 3/8 - -4 3/4 11 3/4
SH_56_US.FM
Notes:
160 07.08
Double girder Frame size B
z2 e1 24 3/8
16 3/8
X
9 1/4
4 1/8
22 1/2 3 1/2 9 3/8 12 1/2 19 6 1/4
2 Spw 2 31 1/2
z1 e4 4 3/4 47 1/8
e10
c1473a01us
hH
tH
1 5/8
X A
1 3/4
Ø2
Ø 3 15/16
b max.
2 3/8
≥ 1 1/8
b1* 2 2 3/8
k k 1 1/2 2
2PS 4PS 2PD 2PS 4PS 2PD

(2/1) (4/1) (4/2-1) (2/1) (4/1) (4/2-1)
C 15 3/4 9 7/8 12 Spw 49 3/16 55 1/8 88 3/16 49 3/16 55 1/8*4 88 3/16 49 3/16 55 1/8 88 3/16
e1 -D2 41 1/4 b D2 7 7/8 9 7/8 9 7/8 7 7/8 9 7/8 9 7/8 7 7/8 9 7/8 9 7/8
-D3 52 7/8 max. D3 - 6 7/8 9 7/8 - 5 7/8 9 7/8 - 7 7/8 9 7/8
e4 -D2 8 5/8 4 3/8 0 z1 D2 19 22 38 5/8 21 3/4 24 5/8 41 1/4 27 1/2 30 3/8 47
-D3 14 1/2 7 1/4 0 D3 - 16 3/8 37 7/8 - 19 40 1/2 - 27 1/2 44 1/8
e10 17 1/2 13 3/4 11 1/2 z2 D2 1/2 3 3/8 20 1/2 3 3/8 20 1/2 3 3/8 20
D3 - -2 1/4 19 1/4 - -2 1/4 19 1/4 - -5 1/4 11 1/4

SH_56_US.FM
Notes:
07.08 161
Frame size C Double girder
z2 e1 31 1/8
5 7/8
24 3/4
X A
14
8 1/8
25 1/8 9 5/8 15 3/4 23 5/8 7 3/4
3 1/2 Spw 3 1/2 39 3/8
z1 e4 56 3/4
C
c1474a01us
e10
hH
tH
Ø 3 1/8
X A
Ø 4 15/16
b max.
3 7/8
≥ 1 1/8
3 1/8
b1* 2 2 3/8
k k 1 1/2 2
C -D2 16 1/2 10 8 7/8 e1 -D2 47 1/4 e4 -D2 9 3/8 4 5/8 0
-D3 -D3 59 5/8 -D3 15 1/2 7 3/4 0
-D4 22 5/8 10 3/8 8 1/4 -D4 90 1/2 -D4 31 15 1/2 0
e10 21 5/8 18 1/4 13 3/4
2PS (2/1) 4PS (4/1) 2PD (4/2-1)

Spw 49 3/16 55 1/8 88 3/16 110 1/4 49 3/16 55 1/8 88 3/16 *4 110 1/4 49 3/16 55 1/8 88 3/16 110 1/4
b D2 7 7/8 9 7/8 9 7/8 - 7 7/8 9 7/8 9 7/8 - 9 7/8 9 7/8 9 7/8 -
max. D3 - 7 7/8 9 7/8 - - 7 7/8 9 7/8 - - 7 7/8 9 7/8 -
D4 - - 7 7/8 7 7/8 - - 7 7/8 7 7/8 - - 7 7/8 -
z1 D2 18 3/4 21 3/4 38 1/4 - 22 1/4 25 1/4 41 3/4 - 24 5/8 27 1/2 44 1/8 -
D3 - 12 7/8 36 3/4 - - 16 3/8 40 1/4 - - 27 1/2 44 1/8 -
D4 - - 15 1/8 37 1/8 - - 18 5/8 40 5/8 - - 44 1/8 -
z2 D2 -3 7/8 -1 15 1/2 - -3 7/8 -1 15 1/2 - -7 -4 12 1/2 -
D3 - -9 3/4 14 - - -9 3/4 14 - - -10 1/4 6 3/8 -
D4 - - -7 5/8 14 3/8 - - -7 5/8 14 3/8 - - -9 1/8 -

SH_56_US.FM
Notes:
162 07.08
Double girder Frame size C
z2 e1 31 1/8
X A
25
8 1/4
3/8
25 1/2 8 3/4 22 27 1/8 10 1/8
3 3/4 Spw 3 3/4 49 1/4
z1 e4 68 2 1/4
C
c1475a01us
e10
hH
tH
Ø 3 1/8
X A
Ø 6 5/16
b max.
3 7/8
≥ 1 1/8
3 1/8
b1* 2 1/16 2 7/16
k k 1 1/2 2
C -D2 15 1/2 11 5/8 7 5/8 e1 -D2 47 1/4 e4 -D2 9 3/8 4 5/8 0
-D3 -D3 59 5/8 -D3 15 1/2 7 3/4 0
-D4 26 1/8 11 5/8 7 5/8 -D4 90 1/2 -D4 31 15 1/2 0
e10 21 5/8 19 5/8 13 3/4
2PS (2/1) 4PS (4/1) 2PD (4/2-1)

Spw 49 3/16 55 1/8 88 3/16 110 1/4 49 3/16 55 1/8 88 3/16 110 1/4 49 3/16 55 1/8 88 3/16 110 1/4
b D2 7 7/8 9 7/8 9 7/8 - 7 7/8 9 7/8 9 7/8 - 9 7/8 9 7/8 9 7/8 -
max. D3 - 7 7/8 9 7/8 - - 7 7/8 9 7/8 - - 7 7/8 9 7/8 -
D4 - - 7 7/8 7 7/8 - - 7 7/8 7 7/8 - - 7 7/8 -
z1 D2 18 3/4 21 3/4 38 1/4 - 22 1/4 25 1/4 41 3/4 - 25 5/8 27 1/2 44 1/8 -
D3 - 12 7/8 36 3/4 - - 16 3/8 40 1/4 - - 27 1/2 44 1/8 -
D4 - - 15 1/8 37 1/8 - - 18 5/8 40 5/8 - - 44 1/8 -
z2 D2 -3 7/8 -1 15 1/2 - -3 7/8 -1 15 1/2 - -7 -4 12 1/2 -
D3 - -9 3/4 14 - - -9 3/4 14 - - -10 1/4 6 3/8 -
D4 - - -7 5/8 14 3/8 - - -7 5/8 14 3/8 - - -9 1/8 -
SH_56_US.FM
Notes:
07.08 163
Frame size D Double girder
z2 e1 41 3/8
27 3/4
X A
8 1/4
28 1/2 3/8 8 3/4 22 7/8 26 3/8 10 1/8
3 1/4 Spw 3 1/4 49 1/4
z1 e4 68 2 1/4
C
c1476a01us
e10
hH
tH
Ø 3 1/8
X A
Ø 6 5/16
b max.
3 7/8
≥ 1 1/8
3 1/8
b1* 2 1/16 2 7/16
k k 1 1/2 2
2PS (2/1) 4PS (4/1) 2PS (2/1) 4PS (4/1) 2PS (2/1) 4PS (4/1)
C -D2 17 3/4 14 5/8 e1 -D2 54 5/8 e4 -D2 9 1/4 4 5/8
-D3 26 5/8 14 5/8 -D3 66 3/4 -D3 15 3/8 7 3/4
-D4 26 5/8 14 5/8 -D4 97 1/4 -D4 30 5/8 15 3/8
-D5 26 5/8 14 5/8 -D5 128 -D5 46 23
e10 24 1/8 23
2PS (2/1) 4PS (4/1)

Spw 49 3/16 55 1/8 70 7/8 88 3/16 110 1/4 124 49 3/16 55 1/8 70 7/8 88 3/16 110 1/4 124
b D2 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8
max. D3 - 7 7/8 9 7/8 9 7/8 9 7/8 9 7/8 - 7 7/8 9 7/8 9 7/8 9 7/8 9 7/8
D4 - - - 7 7/8 9 7/8 9 7/8 - - - 7 7/8 9 7/8 9 7/8
D5 - - - - 2 9 7/8 - - - - 2 9 7/8
z1 D2 17 3/8 20 3/8 28 1/4 36 7/8 47 7/8 54 3/4 22 1/4 25 1/4 33 1/8 41 3/4 52 3/4 59 5/8
D3 - 13 1/4 26 3/4 35 3/8 46 3/8 53 1/4 - 18 1/8 31 5/8 40 1/4 51 1/4 58 1/8
D4 - - - 15 7/8 35 7/8 49 1/2 - - - 20 1/2 40 3/4 54 3/8
D5 - - - - 12 5/8 18 7/8 - - - - 17 1/2 23 7/8
z2 D2 -10 1/8 -7 1/8 3/4 9 3/8 20 3/8 27 1/4 -10 1/8 -7 1/8 3/4 9 3/8 20 3/8 27 1/4
D3 - -14 1/4 -7/8 7 7/8 18 7/8 25 3/4 - -14 1/4 -7/8 7 7/8 18 7/8 25 3/4
D4 - - - -11 3/4 8 3/8 21 7/8 - - - 11 3/4 8 3/8 21 7/8
D5 - - - - -14 7/8 -8 5/8 - - - - -14 7/8 -8 5/8
SH_56_US.FM
Notes:
164 07.08
Double girder Frame size E
2PS (2/1), 2PD (4/2-1)
z2 e1 41 3/8
27 3/4
X A
8 1/4
1/2
25 1/2 8 3/4 22 7/8 26 3/8 10 1/8
3 3/4 Spw 3 3/4 49 1/4
z1 e4 68 2 1/4
C
C1477b01us
e10
hH
tH
Ø 3 1/8
X A
Ø 6 5/16
b max.
3 7/8
≥ 1 1/8
3 1/8
b1* 2 1/16 2 7/16
k k 1 1/2 2
* Others on request
b1
2PS (2/1) 2PD (4/2-1) 2PS (2/1) 2PD (4/2-1) 2PS (2/1) 2PD (4/2-1)
C D2: 25 1/4 380 e1 -D2 54 5/8 e4 -D2 9 1/4 0
D3: 25 1/4 -D3 66 3/4 -D3 15 3/8 0
D4: 34 1/2 -D4 97 1/4 -D4 30 1/2 0
D5: 34 1/2 -D5 128 -D5 45 7/8 0
e10 31 5/8 19 5/8
2PS (2/1) 2PD (4/2-1)

Spw 49 3/16 55 1/8 70 7/8 88 3/16 110 1/4 124 49 3/16 55 1/8 70 7/8 88 3/16 110 1/4 124
b D2 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8
max. D3 - 7 7/8 9 7/8 9 7/8 9 7/8 9 7/8 - 7 7/8 9 7/8 9 7/8 9 7/8 9 7/8
D4 - - - 7 7/8 9 7/8 9 7/8 - - - 9 7/8 9 7/8 9 7/8
D5 - - - - 2 9 7/8 - - - - - 9 7/8
z1 D2 18 1/4 21 1/8 29 37 5/8 48 3/4 55 5/8 24 5/8 27 1/2 35 3/8 44 1/8 55 1/8 62
D3 - 14 27 1/2 36 1/8 47 1/8 54 - 27 1/2 35 3/8 44 1/8 55 1/8 62
D4 - - - 16 5/8 36 3/4 50 1/4 - - - 44 1/8 55 1/8 62
D5 - - - - 13 1/2 19 3/4 - - - - - 62
z2 D2 -10 1/8 -7 1/8 3/4 9 3/8 20 3/8 27 1/4 -12 1/4 -9 1/4 -1 3/8 7 1/4 18 1/4 25 1/8
D3 - -14 1/4 -7/8 7 7/8 18 7/8 25 3/4 - -15 3/8 -7 1/2 1 1/8 12 1/8 19
D4 - - - -11 3/4 8 3/8 21 7/8 - - - -14 1/8 -3 1/8 3 3/4
D5 - - - - -14 7/8 -8 5/8 - - - - - -11 5/8
SH_56_US.FM
Notes:
07.08 165
Frame size E Double girder
4PS (4/1)
z2 e1 41 3/8
27 3/4
X A
6 3/4
3/8
30 1/4 9 3/8 22 7/8 26 3/8 11
5 3/8 Spw 5 3/8 49 1/4
z1 e4 69 1/2 2 5/8
C
C1477c01us
e10
hH
tH
Ø 3 1/8
X A
Ø 7 7/8
b max.
3 3/8
≥ 1 1/8
3 1/8
b1* 2 1/8 2 1/2 2 15/16
k 1 1/2 2 2 1/2
k * Others on request
b1
4PS (4/1) 4PS (4/1)

C 21 1/2 Spw 55 1/8 70 7/8 88 3/16 *4 110 1/4 124 *6
e1 -D2 54 5/8 b D2 9 7/8 9 7/8 9 7/8 9 7/8 9 7/8
-D3 66 3/4 max. D3 5 7/8 9 7/8 9 7/8 9 7/8 9 7/8
-D4 97 1/4 D4 - - 5 7/8 7 7/8 9 7/8
-D5 128 D5 - - - - 2
e4 -D2 4 5/8 z1 D2 25 1/4 33 1/8 41 3/4 52 7/8 59 3/4
-D3 7 5/8 D3 20 1/2 31 5/8 40 1/4 51 1/4 58 1/4
-D4 15 1/4 D4 - - 21 1/8 41 1/8 54 3/8
-D5 23 D5 - - - - 32 1/8
e10 29 3/4 z2 D2 -7 1/2 3/8 9 20 1/8 27
D3 -12 1/4 -1 1/8 7 1/2 18 1/2 25 3/8
D4 - - -11 3/4 8 3/8 21 5/8
D5 - - - - -2 5/8
*4 Spw 88 3/16, D4 only up to 25 tons *6 Spw 124, D5 only up to 25 tons

SH_56_US.FM
Notes:
166 07.08
Double girder Frame size E
4PD (8/2-1)
31 1/8
X A
25 1/8
13
3 1/8 Spw/2 9 3/8 24 3/4 24 3/8 14 1/8
5 3/8 Spw 5 3/8 49 1/4
c1572v01us
X A
Ø3 1/8
Ø7 7/8
9 7/8 max.
3 7/8
≥1 1/8
3 1/8
k
b1 b1* 2 1/8 2 1/2 2 15/16
k 1 1/2 2 2 1/2
* Others on request
4PD (8/2-1)
Spw 88 3/16 111 1/4 124
z D3 -4 7 1/8 14
D4 - 2 3/4 9 5/8
D5 - - - 5 7/8
SH_56_US.FM
Notes:
07.08 167
Frame size F Double girder
4PS (4/1), 20, 25, 30, 35, 40 tons
32 7/8
A Ø3 7/8
11 5/8
3 7/8
30 1/8 29 11 1/2
11 1/2 59
82
b1* 2 1/8 2 1/2 2 15/16 3 5/16
k 1 1/2 2 2 1/2 2 3/4
* Others on request
e1
"A" +z3 z3
O 25 Dimensions O25 /
O 26 O26 only when tra-
vel drive is between
rails (O18/O24)
max. 9 7/8 9 7/8 O 16

9 7/8
hH
min. 1 1/8 O9
k O 18 O 17
4 1/8 tH
b1
O 23 O 24 e4 z1
c1292b01us Spw
4PS (4/1) Hoist Motor Type Capacity O9 O16 O17 (O23)

C 30 1/8 2/12H73 4H73 4H81 [fpm] [tons] (O18, 24)*1
e4 -D1 5 5/8 e1 80/20 20 -3/8 15 1/8 26
-D2 9 3/4 -D1 85 3/4 87 3/8 88 7/8 25 26
-D4 14 7/8 -D2 101 7/8 103 2/4 105 30 29 1/4
O 25/26 8 1/2 -D3 121 1/8 122 3/4 124 3/8 35 29 1/4
-D4 140 1/8 141 5/8 143 1/4 40 29 1/4
*1 Dimensions O18 and O24 on request

4PS (4/1)
Spw 55 1/8 70 7/8 88 3/16 98 7/16 110 1/4 139 3/4
z1 D1 25 2/4 32 5/8 41 1/4 46 3/8 52 1/4 67
D2 - - 39 1/4 44 3/8 50 1/4 65
D4 - - - - - 53 3/4
z3 D1 +3 5 3/4 14 3/8 19 2/4 25 3/8 40 1/4
(+z3) D2 - - 1/4 5 3/8 11 1/4 26
D4 - - - - - +1 1/8
SH_56_US.FM
Notes:
168 07.08
Double girder Frame size F
4PS (4/1), 50 tons
35
A Ø3 7/8
13 3/4
3 7/8
30 1/8 29 13
13 59
85
b1* 2 1/2 2 15/16 3 5/16 3 11/16
k 2 2 1/2 2 3/4 3 1/8
* Others on request
e1
"A" +z3 z3
O 25 Dimensions O25 /
O 26 O26 only when tra-
rails (O18/O24)
max. 9 7/8 12 3/8 O 16

12 3/8
hH
min. 1 1/8 O9
k 5 O 18 O 17
tH
b1
O 23 O 24 e4 z1
c1292c01us Spw
4PS (4/1) Hoist Motor Type Capacity O9 O16 O17 (O23)

C 28 2/12H73 4H73 4H81 [fpm] [tons] (O18, 24)*1
e4 -D1 5 5/8 e1 80/20 50 -1 1/4 20 31 1/4
-D2 9 3/4 -D1 85 3/4 87 3/8 88 7/8
-D4 14 7/8 -D2 101 7/8 103 2/4 105 *1 Dimensions O18 and O24 on request
O 25/26 9 -D3 121 1/8 122 3/4 124 3/8
-D4 140 1/8 141 5/8 143 1/4
4PS (4/1)
Spw 55 1/8 70 7/8 88 3/16 98 7/16 110 1/4 139 3/4
z1 D1 25 2/4 32 5/8 41 1/4 46 3/8 52 1/4 67
D2 - - 39 1/4 44 3/8 50 1/4 65
D4 - - - - - 53 3/4
z3 D1 +3 5 3/4 14 3/8 19 2/4 25 3/8 40 1/4
(+z3) D2 - - 1/4 5 3/8 11 1/4 26
D4 - - - - - +1 1/8
SH_56_US.FM
Notes:
07.08 169
4PD (8/2-1), 20, 25, 30, 35, 40 tons
32 7/8
A Ø3 7/8
11 5/8
3 7/8
35 3/8 35 3/8 11 1/2

11 1/2 70 7/8
93 7/8
b1* 2 1/8 2 1/2 2 15/16 3 5/16
k 1 1/2 2 2 1/2 2 3/4
* Others on request
z3 e1
"A" O 26 O 25 Dimensions O25 /
O26 only when tra-
rails (O18/O24)
max. 9 7/8 9 7/8 O 16

9 7/8
min. 1 1/8 O9
k O 18 O 17
4 1/8
b1
O 23 O 24 0.5 x Spw
c1293b02us Spw
4PD (8/2-1) Hoist Motor Type Capacity O9 O16 O17 (O23)

C 31 3/4 2/12H73 4H73 4H81 [fpm] [tons] (O18, 24)*1
O 25/26 8 1/2 e1 80/20 20 -3/8 15 26
-D2 101 7/8 103 2/4 105 25 26
-D3 121 1/8 122 3/4 124 3/8 30 29 1/4
-D4 140 1/8 141 5/8 143 1/4 35 29 1/4
40 29 1/4
*1 Dimensions O18 and O24 on request

4PD (8/2-1)
Spw 88 3/16 98 7/16 110 1/4 139 3/4
z3 D2 7 3/8 12 1/2 18 3/8 33 1/8
D3 - 2 3/4 9 1/8 33 7/8
D4 - - - 14 1/2
SH_56_US.FM
Notes:
170 07.08
Double girder Frame size F
4PD (8/2-1), 50 tons
35
A Ø3 7/8
13 3/4
3 7/8
35 3/8 35 3/8 13
13 70 7/8
96 7/8
b1* 2 1/2 2 15/16 3 5/16 3 11/16
k 2 2 1/2 2 3/4 3 1/8
* Others on request
z3 e1
O26 only when tra-
rails (O18/O24)
max. 9 7/8 12 3/8 O 16

12 3/8
min. 1 1/8 O9
k 5 O 18 O 17
b1
O 23 O 24 0.5 x Spw
c1293c02us Spw

C 29 1/2 2/12H73 4H73 4H81 [fpm] [tons] (O18, 24)*1
O 25/26 9 e1 80/20 50 -1 1/4 20 31 1/4
-D2 101 7/8 103 2/4 105
-D3 121 1/8 122 3/4 124 3/8 *1 Dimensions O18 and O24 on request
-D4 140 1/8 141 5/8 143 1/4
4PD (8/2-1)
Spw 88 3/16 98 7/16 110 1/4 139 3/4
z3 D2 7 3/8 12 1/2 18 3/8 33 1/8
D3 - 2 3/4 9 1/8 33 7/8
D4 - - - 14 1/2
SH_56_US.FM
Notes:
07.08 171
5PD (10/2-1), 50 tons
35
A Ø3 7/8
13 3/4
3 7/8
35 3/8 35 3/8 13
13 70 7/8
96 7/8
b1* 2 1/2 2 15/16 3 5/16 3 11/16
k 2 2 1/2 2 3/4 3 1/8
* Others on request
z3 e1
O26 only when tra-
rails (O18/O24)
max. 9 7/8 12 3/8 O 16

12 3/8
min. 1 1/8 O9
k 5 O 18 O 17
b1
O 23 O 24 0.5 x Spw
c1293c02us Spw

C 61 2/12H73 4H73 4H81 [fpm] [tons] (O18, 24)*1
O 25/26 9 e1 80/20 50 -1 1/4 20 31 1/4
-D2 101 7/8 103 2/4 105
-D3 121 1/8 122 3/4 124 3/8 *1 Dimensions O18 and O24 on request
-D4 140 1/8 141 5/8 143 1/4
5PD (10/2-1)
Spw 88 3/16 98 7/16 110 1/4 139 3/4
z3 D2 7 3/8 12 1/2 18 3/8 33 1/8
D3 - 2 3/4 9 1/8 33 7/8
D4 - - - 14 1/2
SH_56_US.FM
Notes:
172 07.08
Extended Equipment and Options
Lifting Heights
Extended Lifting Heights
Capacity Duty Class Lifting Lifting Hoist Model No. Wire

Speed Height Rope
FEM HMI
tons
[tons] [fpm] [ft] [mm]
1 3m H4+ 40/6.6 76 1GAxx-2PS-76D3-40T 6
2 3m H4+ 20/3.3 38 2GAxx-4PS-38D3-20T 6
2m H4 40/6.6 85 2GBxx-2PS-85D3-40T 7
3 3m H4+ 40/6.6 83 3GCxx-2PS-83D3-40T 10
165 3GCxx-2PS-165D4-40T
5 2m H4 20/3.3 42 5GBxx-4PS-42D3-20T 7
3m H4+ 20/3.3 41 5GCxx-4PS-41D3-20T 10
82 5GCxx-4PS-82D4-20T
7.5 3m H4+ 20/3.3 41 7.5GCxx-4PS-41D3-20T 10
83 7.5GCxx-4PS-83D4-20T
3m H4+ 32/5.3 41 7.5GCxx-4PS-41D3-32T 10
83 7.5GCxx-4PS-83D4-32T
20 * 3m H4+ 20/3.3 80 20GFxx-4PS-80D4-20T 25
3m H4+ 1.2 to 25 80 20GFxx-4PS-80D4-25V 25
25 * 3m H4+ 20/3.3 80 25GFxx-4PS-80D4-20T 25
3m H4+ 1.2 to 25 80 25GFxx-4PS-80D4-25V 25
30 * 3m H4+ 16/2.6 80 30GFxx-4PS-80D4-16T 25
3m H4+ 1.0 to 20 80 30GFxx-4PS-80D4-20V 25
35 * 2m H4 16/2.6 80 35GFxx-4PS-80D4-16T 25
2m H4 1.0 to 20 80 35GFxx-4PS-80D4-20V 25
40 * 1Am H3 12/2.0 80 40GFxx-4PS-80D4-12T 25
2m H4 0.8 to 16 80 40GFxx-4PS-80D4-16V 25
50 * 1Bm H2 10/1.6 80 50GFxx-4PS-80D4-10T 25
1Am H3 0.7 to 13 80 50GFxx-4PS-80D4-13V 25
* Rope drive next to hoist instead below hoist.
Dimensions on request.
Model F with modified upper block and therefore modified hoist dimensions.
Drawing on request.
SH_66_US.FM
07.08 173
Equipment and Options A020
A020 Geared Upper & Lower Limit Switch

G series hoists are equipped with a geared limit switch as standard.
The limit switch (made by Stromag) is connected to the gear box and mounted in the hoist control
panel. It cuts off in the upper and lower hook positions. If requested, switching elements for
additional stop positions are available.
The following versions of the limit switch are available:
Emergency limit switch: 2 stop positions, standard design

This switch cuts off only the upper & lower hook travel.
Suitable for most applications, when upper & lower hook positions are not frequently reached.
A021 Operational Limit Switch

with backup (emergency) limit switch: 4 stop positions
2 stop positions are used for operational stops and can be set as required, the subsequent upper
und lower limit positions are used as backup or emergency limit positions.
• This limit switch is needed for applications, when upper & lower hook positions are frequently
reached. In case that the operational limit switch falls, the backup switching elements will cut off
the hoist motor. For testing the function of the emergency limit switch, a by-pass button in the
pendant station is recommended (standard when our controls are included with the hoist). The
headroom of the hoist increases, and the available lift is reduced accordingly.
Automatic speed reduction in upper hook position

Some G series models use the geared limit switch for automatically changing over from fast to slow
speed right below the upper hook position. This minimizes the hoist's headroom dimensions.
More than 4 stop positions

Optional, on request.
hH = Highest hook position, emergency limit switch
tH = Lowest hook position, emergency limit switch
B = Operational stop, can be set as required
X = Effective hook path with operational limit switch
Switching elements
Each switching element is equipped with 1 normally closed contact and 1 normally open contact.
A023 Block operated Upper Limit Switch

The switch is actuated when the block lifts the weight (see sketch).
Wiring of this switch is set so that it actuates first and the geared upper limit switch operates
second as a "back-up" safety.
Rope
Weight
c1567v01
C
SH_66_US.FM
174 07.08
A040 Equipment and Options
A040 Travel Limit Switch

The travel limit switch has 4 switching functions:
Pre-switching and limit switching in both directions of travel.
The speed is switched over from "fast" to "slow" before the end of the runway is reached, and cut off
completely at the end of the runway.
The switching contacts are designed for control current.

Type of protection IP 66.
X = stop, left
Y = stop, right
Z = fast / slow
The travel limit switch is electrically connected. In the case of double girder trolleys, the bracket for
the limit switch can also be used as a towing arm for the power supply, see also A150.
Monorail trolley Type a ØF Hmin

5 1/8
2 1/2 Frame size A 7 1/2, 8 3/4, 9 7/8 *3 3 1/8 9 1/2
*1
Frame size B D2 9 1/2, 10 3/4 *3 3 7/8 11 3/4
D3 10 3/4 13
Frame size C D2 12 1/4, 13 1/2 *3 5 1/2 14 1/8
ØF
Hmin
D3 12 1/4, 13 1/2 *3 14 1/8

a
D4 13 1/2 15 3/4
Frame size C D2 13 1/2 5 1/2 15 3/4
4PS (4/1) D3 13 1/2
Frame size D on request 7 7/8 on request
Frame size E 7 7/8
c1002a03us
2PS (2/1)
Double girder trolley Type b c d ØD
Frame size A 1/4 31 1/4 9 1/4 3 7/8

Frame size B 1/4 31 1/4 9 1/4 3 7/8
Frame size C 1/2 36 8 5/8 4 7/8
Frame size C 5/8 36 9 1/8 6 1/4
Frame size D 5/8 36 9 1/8 6 1/4
Frame size E 5/8 36 9 1/8 6 1/4
2PS (2/1)
Frame size E 1 3/8 9 1/8 7 7/8
4PS (4/1)
*1 By customer
*2 C = standard mounting position
SH_66_US.FM
*3 Adjustable by customer
07.08 175
A100 Rope Exit Angles
Base mounted Frame size

α
α
A α
1/1, 2/2 B
α
Frame Frame Frame Frame C
size A size B size C size E
E
α
α1 4° 5° 8° 8° α
α2 23° 13° 20° 18°
α3 27° 30° 30° 30°
α4 74° 73° 76° 80° α α α
α5 30° 30° 30° 25°
α6 113° 103° 110° 108°
α7 63° 61° 60° 60°
α
α8 11° 12° 16° 20°
α9 24° 26° 30° -
α
α
α
α10 7° 7° 8° 8° α
α12 90° 90° 90° -
Frame size E
α
The shearing forces must
be taken up separately.
Top mounted
Frame size α
α
A α
α
1/1, 2/2
B
Frame Frame Frame Frame
size A size B size C size E C
α1 4° 5° 8°
α
α2 23° 13° 20° α

α3 27° 30° 30°
α4 74° 73° 76°
on α α
α5 16° 17° 14° request
α
α6 34° 32° 36°

α7 74° 73° 76°
α12 90° 90° 90° α
α
α13 90° 90° 90°
α
α
α
α
α
Frame size E
On request
Type The rope guide must be adjusted to the fleet angle. Observe also the radial rope exit angle γ.
γ°
γ
Frame size A 53° *** Preferential installation position
Frame size B 60° *1 Standard
*2 By turning rope guide
Frame size C 53°
SH_66_US.FM
*4 By turning rope guide and grease pan

Frame size E 53°
176 07.08
A150
A101 Angle of Installation

Install the wire rope hoist within the permissible range of angles. Hoists with rope drives with
bottom hook blocks must always be installed horizontal to the longitudinal axis.
≤
≤
≤ ≤
A150 Towing Arm for Power Supply

A towing arm, mounted on the trolley, is available for the power supply of a wire rope hoist with
trolley.
The height and length of the towing arm are adjustable and it can be used universally for power
supply both by festoon cable and conductor lines.
When ordering, please state the length (for monorail trolleys) or the fixing position A/B/C/D (for
double girder trolleys).
(C = standard).
Note: In the case of a double girder trolley, the travel limit switches, if any, are also attached to the
towing arm, see also A040.
Monorail trolley
ØD a b
Frame size A 3 1/8 19 13 3/8
Frame size B 3 7/8 20 5/8 14 1/8
Frame size C 5 1/2 25 1/4 16 3/4
Frame size D, E 7 7/8 31 1/8 22 1/4
Double girder trolley
ØD c d
Frame size A 3 7/8 31 1/4 5 5/8
Frame size B 3 7/8 31 1/4 5 5/8
Frame size C 4 7/8 36 4 7/8
Frame size D 6 1/4 36 *2
Frame size E 7 7/8 36 6 1/4
*2 On request
SH_66_US.FM
07.08 177
A190 Articulated Trolleys

Articulated trolleys are used on curved runways. The bogies with lateral guide rollers travel round
even tight bends with minimal wear on the runway.
The articulated trolleys are supplied with one or two travel motors depending on radius of bend and
runway flange width.
If the curved section is travelled frequently, the version with two travel motors is recommended.
N.B.: These articulated trolleys are not suitable for use in overhead conveyor systems.
Trolleys for use in overhead conveyor systems on request.
For technical features of G series hoists see page 5.
Selection Chart
The chart below contains no data for hoists. Please take the hoist data from the hoist selection
chart on page 11.
Capa- Type Weight Travelling Speed

city
1 travel motor 2 travel motors 80/20 fpm
1 travel motor 2 travel motors
D2 D3 D4 D2 D3 D4
tons
[tons] 2PS (2/1), 2PD (4/2-1) 4PS (4/1) [lbs] [lbs] 20/40% DC 20/40% DC
1 1GAAS-... - 790 835 - 870 925 - SF 17113 123 SF 17113 123 179
2 - 2GAAS-... 790 835 - 870 925 - 0.6/0.15 HP 2x0.6/0.15 HP 179
3 - 3GAAS-... 790 835 - 870 925 - 179
3GBAS-... - 945 945 - 1025 100 - 180
3GCAS-... - 1960 2100 2585 2000 2145 2630 SF 17213 123 SF 17213 123 181
0.6/0.15 HP 2x0.6/0.15 HP
5 - 5GBAS-... 945 1025 - 1025 1100 - SF 17113 123 SF 17113 123 180
0.6/0.15 HP 2x0.6/0.15 HP
5GCAS-... - 1960 2100 2585 2000 2145 2630 SF 17213 123 SF 17213 123 181
5GCAS-... - 200 2145 2630 2045 2190 2675 0.6/0.15 HP 2x0.6/0.15 HP
7.5 - 7.5GBAS-... 945 1025 - 1025 1100 - SF 17113 123 SF 17113 123 180
0.6/0.15 HP 2x0.6/0.15 HP
- 7.5GCAS-... 1960 2100 2585 2000 2145 2630 SF 17213 123 SF 17213 123 181
7.5GCAS-... 2000 2145 2630 2045 2190 2675 0.6/0.15 HP 2x0.6/0.15 HP
10 - 10GCAS-... 1960 2100 2585 2000 2145 2630 SF 17213 123 SF 17213 123 181
- 10GCAS-... 2000 2145 2630 2045 2190 2675 0.6/0.15 HP 2x0.6/0.15 HP
Further travel motor data see C060, C070.

Alternative travel speeds on request.
SH_66_US.FM
178 07.08
Articulated Trolley, Frame size A
9 1/2 u5
B
6 1/4 u2 X
4 3/8 4 3/8
1 5/8 !! *4
*6
Ø3 15/16
5
6 1/4
"A"
1 1/8
Ø3 1/8
3/8 (5/8)*1
1
19 3/4
"A" 21 1/4 15 3/4
3 7/8 X !!
!! *4 *4
4 3/4 3 7/8
3 7/8
5
5
u1
u3 e4
9 1/4
u6
hH
*3
e1
tH
28 1/4
C
U
e10
c0707a09us
2PS (2/1) 4PS (4/1) 2PD (4/2-1) 2PS (2/1) 4PS (4/1) 2PD (4/2-1) B U B *2 B *3
C 33 3/8 28 27 3/4 u2 -D2 39 3/8 U -D2 =>39 3/8 3 1/2...5 3 1/2...8 5/8
e1 -D2 40 3/8 (48 1/4) *7 -D3 51 1/8 =>49 1/4 3 1/2...6 *8
-D3 52 (59 7/8) *7 u3 -D2 13 3/8 15 1/2 22 1/4 =>63 3 1/2...7 1/2
e4 -D2 9 1/8 4 5/8 0 -D3 13 1/4 15 5/8 28 1/4 =>78 3/4 3 1/2...8 5/8
-D3 15 1/4 7 5/8 0 u5 -D2 45 5/8 -D3 =>51 1/8 3 1/2...6 3 1/2...8 5/8
e10 13 7/8 11 1/2 9 1/2 -D3 57 1/2 =>63 3 1/2...7 1/2 *8
u1 -D2 36 3/8 u6 -D2 17 1/4 =>78 3/4 3 1/2...8 5/8
-D3 48 -D3 16
*1 With tapered flange *4 N.B.: Observe clearance dimensions *7 For supply voltage 230 V, and supply voltage ≥380 V
*2 With 1 travel motor *6 Wheel load with transformer and main contactor
SH_66_US.FM
*3 With 2 travel motors *8 Wider flange widths on request
07.08 179
Articulated Trolley, Frame size B
9 1/2 u5 B
6 1/4 u2 X
4 3/8 4 3/8
1 5/8 !! *4
*6
Ø3 15/16
5
6 1/4
"A"
1 1/8
Ø3 1/8
3/8 (5/8)*1
5
20 1/8
"A" 21 1/4 18 1/4
3 7/8 X !!
!! *4 *4
4 3/4 3 7/8
3 7/8
5
5
u3 e3
e4
9 1/4
u6
hH
*3
e1
tH
29 5/8
C
U
e10
c0707a10us
C 35 1/4 31 1/4 32 1/8 u2 -D2 39 3/8 U -D2 =>39 3/8 3 1/2...5 3 1/2...8 5/8
e1 -D2 41 1/4 (49) *7 -D3 59 =>49 1/4 3 1/2...6 *8
-D3 52 7/8 (60 7/8) *7 u3 -D2 13 7/8 16 1/2 22 1/4 =>63 3 1/2...7 1/2
e4 -D2 8 5/8 4 3/4 0 -D3 22 24 5/8 36 1/8 =>78 3/4 3 1/2...8 5/8
-D3 14 1/2 7 1/4 0 u5 -D2 45 5/8 -D3 =>59 3 1/2...6 3 1/2...8 5/8
e10 16 1/4 13 3/4 11 1/2 -D3 65 3/8 =>63 3 1/2...7 1/2 *8
u1 -D2 36 1/2 u6 -D2 17 1/4 =>78 3/4 3 1/2...8 5/8
-D3 56 1/8 -D3 16
*1 With tapered flange *4 N.B.: Observe clearance dimensions *7 For supply voltage 230 V, and supply voltage ≥380 V
*2 With 1 travel motor *6 Wheel load with transformer and main contactor
SH_66_US.FM
*3 With 2 travel motors *8 Wider flange widths on request
180 07.08
Articulated Trolley, Frame size C
10 1/2 u5 B
6 7/8 u2 X
6 1/8 6 1/8
2 1/2 !! *4
*6
6 7/8
Ø5 1/2
7 3/4
"A"
1 5/8
Ø3 1/8
5/8 (1)*1
1 3/8
26 1/4
"A" 25 3/8 23 1/4
4 3/4 X !!
!! *4 *4
6 7/8
6 7/8
5 1/2 5 3/4
5 3/4
u1
u3 e4
11 5/8
hH
*3
u6
e1
tH
37 1/4
C
U
e10
c0707a11us
C -D2 44 7/8 37 3/8 38 5/8 u2 -D2 45 1/4 U -D2 =>59 4 5/8...7 5/8 4 5/8...
-D3 -D3 57 5/8 -D3 =>63 4 5/8...8 1/8 11 3/4
-D4 54 7/8 37 3/8 38 5/8 -D4 106 1/4 =>78 3/4 4 5/8...9 3/4
e1 -D2 47 1/4 u3 -D2 17 1/8 20 5/8 26 =>98 3/8 4 5/8...
-D3 59 5/8 -D3 17 1/8 20 5/8 32 1/4 11 3/4
-D4 90 1/2 -D4 34 7/8 38 3/8 65 3/8 -D4 =>106 1/4 4 5/8... 4 5/8...
e4 -D2 9 3/8 4 5/8 0 u5 -D2 52 1/8 11 3/4 11 3/4
-D3 15 1/2 7 3/4 0 -D3 64 5/8
-D4 31 15 1/2 0 -D4 113 1/4
e10 21 5/8 16 7/8 13 3/4 u6 -D2 25
u1 -D2 41 5/8 -D3 24 1/4
-D3 54 -D4 21 1/2
-D4 102 5/8
*1 With tapered flange *3 With 2 travel motors *6 Wheel load

SH_66_US.FM
*2 With 1 travel motor *4 N.B.: Observe clearance dimensions
07.08 181
Components and Accessories B030
B031, B032
B030 Bottom Hook Blocks

Standard wire rope hoists are equipped with bottom hook blocks as shown in the table.
Wire Rope Hoist Bottom Hook Block

1PS 2PS 4PS 1PD 2PD 4PD 5PD
(1/1) (2/1) (4/1) (2/2-1) (4/2-1) (8/2-1) (10/2-1)
Frame size A - H 125-2 H 125-4 - - - -
Frame size B H 122-1 H 164-2 H 162-4 T 130-2 H 125-4 - -
Frame size C - H 225-2 H 226-4 - H 162-4 - -
Frame size C H 190-1 H 227-4 T 160-2 -
Frame size D - H 252-2 H 252-4 - - - -
Frame size E - H 375-2 H 375-4 - H 227-4 U 225-8 -
Frame size F - - H 454-4 - - U 375-8 U 375-10
B031 Bottom Hook Block 1PS (1/1)
Ød1
1PS Capa- Hoist HMI Hook Wire
city Size Rope
Dimensions Weight Order-Number
(1/1) Dia. e10 Ød1

Type [lbs] [mm] "E" "D" [lbs] "E" "D"
e10
H 122-1 2200 B H4 0.8 9 12.283 - 4.724 35 P0000103 -

H 190-1 7000 C H4 1.6 12.5 17.441 - 7.087 105 P0001331 -
c0713a03us
B032 Bottom Hook Block 1PD (2/2-1)
h4 h6
b1
e10
c0796a01us
1PD Capa- Hoist

city
HMI Hook
Size
Wire
Rope
(2/2-1) Dia. e10 b1 h4 h6

Type [lbs] [mm] "E" "D" [lbs] "E" "D"
T 130-2 3500 B H4 1 5.0-7.5 11.732 - 5.118 8.425 3.346 15.8 P0001375 -
T 160-2 7000 C H4 1.6 12 14.646 - 6.299 11.496 3.780 P0001378 -
"E" Single load hook

SH_66_US.FM
"D" Sister load hook (ramshorn hook)
182 07.08
B033 Components and Accessories
B034
Bottom Hook Block 2PS (2/1)

B033
h9 h4
Ød1
h8
e10
h1
"D" "E"
c0711a03us
2PS (2/1) Capa- HMI

city
Hook
Size
Wire
Rope
Dia. e10 h1 h4 h8 h9 Ød1

Type [lbs] [mm] "E" "D" "E" "D" [lbs] "E" "D"
H 100-2 2200 H4 0.5 4-5.5 11.299 - 8.661 - 2.165 6.969 5.315 3.858 14 P0000093 -
H 125-2 3500 H4 0.8 6-7 13.937 - 10.669 - 2.480 8.858 6.535 4.921 20 P0000095 -
H 164-2 5500 H4 1.6 7.5-10 17.441 - 13.268 - 2.913 11.220 8.236 6.299 29 P0000104 -
H 225-2 11000 H4 2.5 11-12.5 21.575 21.929 15.866 16.220 3.700 14.881 11.417 8.858 66 P0000106 P0000108
H 252-2 15000 H4 4 12-15 23.976 23.661 17.677 17.362 5.039 12,598 12.402 9.843 80 P0001358 P0001371
H 375-2 27500 H4 5 16.5-20 31.575 31.811 22.362 22.598 5.906 18.425 18.425 14.764 165 P0001384 P0001404
H 377-2 5 13-16 31.575 31.811 22.362 22.598 5.906 18.425 18.425 14.370 165 P0001393
B034 Bottom Hook Block 4PS (4/1), 2PD (4/2-1)

h3 h4
h5
X
Ød1
e10
h1
"D" "E"
c0712a01us
X
1x45 *
4PS (4/1) Capa- HMI

city
Hook
Size
Wire
Rope
2PD (4/2-1) Dia. e10 h1 h3 h4 h5 Ød1

Type [lbs] [mm] "E" "D" "E" "D" [lbs] "E" "D"
H 100-4 * 4400 H4 0.8 4-5.5 9.488 - 6.772 - 5.394 6.260 4.331 3.937 22 P0000090 -
2PD (4/2-1)
H 125-4 7000 H4 1.6 6-7 11.457 11.063 8.189 7.795 6.535 7.165 5.118 4.921 29 P0000096 -
H 162-4 11000 H4 2.5 7.5-10 13.780 14.134 9.606 9.961 8.346 8.150 5.906 6.299 46 P0000100 P0000102
H 226-4 22000 H4 4 11-12.5 18.228 17.716 12.598 12.086 11.062 10.551 7.913 8.858 106 P0000111 P0000112
H 227-4 30000 H3 5 11-12.5 19.606 20.125 13.976 14.527 11.062 11.181 8.543 8.858 143 P0000114 P0000115
H 252-4 30000 H4 6 12-15 23.031 22.835 16.693 16.496 12.598 13.031 10.315 9.843 165 P0001362 P0001372
H 375-4 60000 H3 10 16.5-20 29.764 29.134 20.354 19.724 18.425 17.402 12.323 14.764 374 P0001385 P0001405
H 377-4 10 13-16 29.764 29.134 20.354 19.724 18.425 17.402 12.323 14.370 374 P0001379
H454-4 110000 H2 20 25 39.685 39.016 29.055 28.386 21.654 24.331 16.654 17.717 990 P0001431 P0001435
* Identifying bevel on rope sheave

SH_66_US.FM
07.08 183
B040
Bottom Hook Block 4PD (8/2-1)

B037
10 1/4
2 7/8
5/8 38 1/2
18 1/2 4PD Capa-
city
Hoist HMI Hook
Size
Wire
Rope
Weight Order-Number
3/
14
4
(8/2-1) Dia.
Type [lbs] [mm] [lbs] "E" "D"
U 375-8 110000 AS 70 H2 1 20 1100 P0001399 P0001403
c0595a01us
41 3/8 40 3/4
32 1/2 31 7/8
"E" "D"
B040 Bottom Hook Block 5PD (10/2-1)

10 1/4 5/8 38 1/2
18 1/2
5PD Capa-
city
Hoist HMI Hook
Size
Wire
Rope
Weight Order-Number
2 7/8
(10/2-1) Dia.
58 1/4 61 5/8
Type [lbs] [mm] [lbs] "E" "D"
U 375-8 110000 AS 70 H2 1 20 1100
4
3/
14
c0595v02us
32 1/2 31 7/8
"E" "D"

SH_66_US.FM
184 07.08
B050 Components and Accessories
B061, B062
B050 Load Hooks
Hook
Size
a1 a3 b1 b2 h2 z a1 a2 a3 b2 f h z
0.25 1.417 1.614 0.748 0.945 1.024 - - - - - - -
0.4 1.575 1.772 0.866 1.142 1.102 - - - - - - -
0.5 1.693 1.929 0.945 1.220 1.142 - - - - - - -
0.8 1.890 2.126 1.142 1.457 1.299 - - - - - - -
1 1.969 2.244 1.260 1.575 1.378 - - - - - - -
1.6 2.205 2.520 1.496 1.890 1.575 - - - - - - -
2.5 2.480 2.835 1.772 2.283 1.654 1.969 1.575 2.559 1.575 8.189 1.969 1.181
4 2.795 3.149 2.086 2.637 1.929 2.204 1.771 2.874 1.889 9.370 2.362 1.299
5 3.150 3.543 2.362 2.953 2.087 2.480 1.969 3.229 2.087 10.472 2.638 1.575
6 3.543 3.976 2.638 3.346 2.441 2.795 2.205 3.622 2.362 11.850 2.953 1.654
10 4.409 5.000 3.346 4.173 3.228 3.543 2.795 4,567 2.953 14.843 3.740 1.967
20 6.299 7.087 5.512 4.646 5.906 4.567 4.921 3.937 6.417 4.173 20.906 5.197 2.835
B061 Rope Sheaves

b1 Diameter Rope Dia. Max Dimensions Bearings Weight Order-
d1 Loading Number
R
1x45 *
Pmax. *2
[mm] [mm] [lbs] b b1 Ød Ød2 R DIN 625 lbs]
100 * (4’’) 4.0-5.5 2200 1.04 0.827 0.984 4.724 0.118 2x 6005-2RS 2.2 P0000077
101 (4’’) 6.0-6.35 P0000081
125 (5’’) 6.5-7 3500 1.102 0.906 1.181 5.866 0.146 2x 6006-2Z 3.5 P0000075
Ø d2 Ø d1 Ød
154 (6’’) 6.5-7 7000 1.280 1.102 1.772 7.598 0.157 2x 6009-2Z 5.5 P0000084
160 (6’’) 7.5-10 7000 1.280 1.102 1.772 7.598 0.220 2x 6009-2Z 5.5 P0001313
152 (6’’) 6.0-7.5
225 (9’’) 12-12.5 14000 1.692 1.535 1.968 10.511 0.267 2x 6210-Z 15.4 P0000079
218 (9’’) 9-10 11000 0.209
c0073v03
250 (10’’) 12-15 17600 1.969 1.772 2.362 11.811 0.331 2x 6212-2Z 21.3 P0001354
b 365 (14’’) 13-16 30000 2.520 2.362 2.756 17.441 0.335 2x 6214-Z 46.6 P0001412
375 (15’’) 16.5-20 30000 2.520 2.362 2.756 17.441 0.453 2x 6214-Z 46.6 P0005859
450 (18’’) 22.5-25 55000 2.835 2.913 3.937 20.472 0.571 2x 6220-2Z 61.6 P0001415
B062 Rope Anchorages
Rope Capa- Dimensions Weight Order-

Dia. city Number
[mm] [lbs] a b c d e f g k j l m Øn o [lbs]
6.0-6.5 2200 3.386 2.402 0.945 4.134 1.339 0.748 0.394 1.772 2.205 0.551 1.732 2.2 P0001725
7.0-7.5 P0001732
7.0 3500 4.331 2.756 1.142 5.079 1.496 0.748 0.512 - 1.102 0.394 2.362 0.709 1.941 3.3 P0002111
8.5-9.0 P0002100
9.0- 5500 5.591 3.701 1.339 6.890 2.205 1.299 0.591 3.189 1.339 0.453 2.992 0.945 2.402 4.2 P0002364
10.0
11.9- 5500 5.591 3.701 1.339 6.890 2.205 1.299 0.591 3.189 1.339 0.453 2.992 0.945 2.402 4.2 P0002352
12.5 7000 6.890 4.882 1.378 8.346 2.638 1.457 0.709 3.858 2.441 0.591 2.992 0.945 2.402 6,6 P0002373
14.0- 8800 6.890 4.882 1.378 8.346 2.638 1.457 0.709 4.803 2.244 0.591 3.110 0.945 2.441 6,6 P0009719
15.5 3.543 2.756 P0010053
20 14000 7.480 6.102 1.850 9.449 2.953 1.969 0.906 5.000 2.559 0.787 4.055 1.417 3.346 11 P0009997
25 27500 12.205 8.858 2.992 14.764 4.331 2.559 1.260 7.874 4.567 1.122 6.260 1.969 5.433 70.4 P0010377
* Identifying bevel on rope sheave

*2 P max = 2x nominal tractive force on rope
*3 Without bolt
SH_66_US.FM
07.08 185
B080 Runway Endstops

a a Monorail trolley
The bumpers are mounted at the place marked with "End stop", like shown in the sketch.
a b c d
Frame size A 1/4 2 1/8 2 1 5/8
Frame size B
Frame size C 1/2 2 1/2 1 4/8
b
Frame size D
Frame size E 2PS, 2PD
c Frame size E 4PS 1 3/4
d
c1622v01us
Double girder trolley
Frame size A + B
Crane
Frame size C + D + E
Crane
ØD a
Frame size C 5 3 7/8
Frame size C 6 1/4 4
Frame size D 6 1/4 3 1/8
Frame size E 2PS, 2PD 6 1/4 3 1/8
Frame size E 4PS 8 4
SH_66_US.FM
186 07.08
C060 Technical Data
C070
C060 Hoist Motors (2 speed)
Hoist HP % DC s/h 220...240 V, 60 Hz 440...480 V, 60 Hz 575...600 V, 60 Hz Recommended

Motor Type Fuse Size
Full Load Inbrush Full Load Inbrush Full Load Inbrush 230 V 460 V 575 V
Amps Amps Amps Amps Amps Amps Amps
12/2H33 0.7/4.9 20/40 240/120 8.0/13.5 9.6/50 4.0/6.8 4.8/25 3.2/5.4 3.8/20 16 10 10
12/H42 1.3/7.8 20/40 240/120 10.2/20 15/94 5.1/10 7.5/47 4.1/8.0 6.0/38 35 16 16
12/2H71 2.4/15.5 20/40 300/150 16.7/42 34/120 9.6/21 18.5/105 7.7/16.9 14.8/84 63 35 25
12/2H72 3.9/25.3 20/40 240/120 26/66 52/345 13.4/34 26/175 10.7/27 20.8/140 80 50 35
*1
12/2H73 6.3/39.4 20/40 240/120 42/94 85/480 22/48 44/243 17.6/38 35/194 125 63 63
*1
Hoist Motors (4-pole for inverter)
Hoist Motor Type HP % DC 440...480 V, 60 Hz Recommended

Fuse Size
Full Load Amps Amps
4H33-MF10MB200 5.8 60 9.3 10
4H42-MF10MC200 7.2 60 10.8 15
4H71-MF11MB200 14.8 60 22 25
4H72-MF13Z-200 24 60 31 35
4H73-MF13ZB200 36 60 44 50
4H81-MF13ZC200 46 60 56 60
C070 Travel Motors Hoist Models A - E
Capacity Single Girder Trolley Double Girder Trolley
80/20 fpm 40/10 fpm 128/32 fpm 80/20 fpm 40/10 fpm 128/32 fpm
1PS (1/1) 2PS (2/1) 4PS (4/1) Type Type Type Type Type Type
[tons] 1PD (2/2-1) 2PD (4/2-1)
A/B/C A A SF 17113123 SF 17219123 SF 17109123 SF 17113123 SF 17219123 SF 17109123
B B
C 2x SF 17113123 2x SF 17219123 2x SF 17109123 2x SF 17113123 2x SF 17219123 2x SF 17109123
B SF 17113123 SF 17219123 SF 17109133 SF 17113123 SF 17219123 SF 17109133
B SF 17209313 SF 17209313
C SF 17213123 SF 17219123 SF 17209123 SF 17213123 SF 17219123 SF 17209123
C SF 17209133 SF 17209133
C C SF 17213133 SF 17209313 SF 17213133 SF 17209313
C SF 17213313 SF 17213313
D SF 17213123 SF 17219123 SF 17209133 SF 17213123 SF 17219123 SF 17209133
D/E SF 17213133 SF 17209313 SF 17213133 SF 17209313
E D SF 17213313 *2 SF 17213313 *2
E 2x SF 17213133 2x SF 17219123 2x SF 17209313 2x SF 17213133 2x SF 17219123 2x SF 17209313
E 2x SF 17213313 2x SF 17213313
*1 Operation always with special starting circuit via 12/24-pole winding.

SH_66_US.FM
*2 18 tons not available.
07.08 187
Technical Data C070
C070 Travel Motors Hoist Model F
Capacity Double Girder Trolley

80/20 fpm
[tons] Type
25 SA-C 5732313
30
35
SA-C 5732423
40
50 SA-C 6734523
Further travel motor data (2 speed)
Motor Motor Type HP Rpm 230 V, 60 Hz 460 V, 60 Hz % DC

Code No. Full Load Amps Inbrush Amps Full Load Amps Inbrush Amps
..43.. 2/8 A04 0.33/0.08 3255/780 1.8/1.8 4.8/2.2 0.9/0.9 2.4/1.1 40/20
...123 2/8 F12 0.6/0.15 3225/785 2/1.6 6.6/2.6 1/0.8 3.3/1.3 40/20
...133 2/8 F13 0.9/0.2 3085/680 3.8/2 8.2/2.6 1.9/1 4.1/3.1 40/20
...313 2/8 F31 2.0/0.5 3460/840 5.8/2.6 31/7 2.9/1.3 15.5/3.5 40/20
...423 2/8 F42 3.3/0.75 3360/780 8.4/3.6 50/10 4.2/1.8 25/4.8 40/20
Further travel motor data (4-pole for inverter)
Type of travel drive Motor Type HP 440 - 460 V

Full Load Amps Inbrush Amps
SF/SA-Cxxxxx184 4F18 1 2.2 2.7
SF/SA-Cxxxxx384 4F38 3 5.2 9.5
SF/SA-Cxxxxx484 4F48 4.3 8.6 23
SH_66_US.FM
188 07.08
Single reeved Quick Selection Chart Single reeved Quick Selection Chart
for Hoist Models for Hoist Models
Lifting Height
Lifting Height
Lifting Height
Lifting Height
Lifting Speed
Lifting Speed
Lifting Speed
Lifting Speed
Hoist Model No. Hoist Model No. Hoist Model No. Hoist Model No.
Duty Class
Duty Class
Duty Class
Duty Class
Girder Trolley
Girder Trolley
Girder Trolley
Girder Trolley
Capacity
Capacity
Capacity
Capacity
Base Hoist
Base Hoist
Base Hoist
Base Hoist
Monorail
Monorail
Monorail
Monorail
Double
Double
Double
Double
Trolley
Trolley
Trolley
Trolley
[tons] HMI [fpm] [ft] [tons] HMI [fpm] [ft] [tons] HMI [fpm] [ft] [tons] HMI [fpm] [ft]
1 H4+ 40/6.6 39 1GAxx-2PS-39D2-40T 19 32 160 10 H4 32/5.3 20 10GCxx-4PS-20D2-32T 23 76 162 25 H4 12/2.0 20 25GExx-4PS-20D2-12T 28 119 166 40 H4 1.5 to 15 23 40GFxx-4PS-23D1-16F 30 168
66 1GAxx-2PS-66D3-40T 20 33 33 10GCxx-4PS-33D3-32T 24 80 33 25GExx-4PS-33D3-12T 121 39 40GFxx-4PS-39D2-16F
H4 80/13.2 78 1GBxx-1PS-78D2-80T 21 158 - 66 10GCxx-4PS-66D4-32T 86 66 25GExx-4PS-66D4-12T 123 59 40GFxx-4PS-59D4-16F
131 1GBxx-1PS-131D3-80T 22 158 H4+ 20/3.3 28 10GDxx-4PS-28D2-20T 27 77 164 96 25GExx-4PS-96D5-12T 125 H4+ 13/2.1 26 40GFxx-6PS-26D2-13T
2 H4+ 20/3.3 20 2GAxx-4PS-20D2-20T 19 34 160 46 10GDxx-4PS-46D3-20T 82 H4 20/3.3 20 25GExx-4PS-20D2-20T 28 120 166 39 40GFxx-6PS-39D3-13T
33 2GAxx-4PS-33D3-20T 20 35 93 10GDxx-4PS-93D4-20T 87 33 25GExx-4PS-33D3-20T 122 52 40GFxx-6PS-52D4-13T
on request
H4 40/6.6 39 2GBxx-2PS-39D2-40T 21 36 161 139 10GDxx-4PS-139D5-20T 66 25GExx-4PS-66D4-20T 124 65 40GFxx-6PS-65D5-13T
66 2GBxx-2PS-66D3-40T 22 37 H4+ 32/5.3 28 10GDxx-4PS-28D2-32T 27 78 164 96 25GExx-4PS-96D5-20P 126 H4+ 0.8 to 16 26 40GFxx-6PS-26D2-16F
3 H4 20/3.3 20 3GA-4PS-20D2-20T 19 38 160 46 10GDxx-4PS-46D3-32T 83 H4 2.5 to 25 20 25GExx-4PS-20D2-32F 28 120 166 39 40GFxx-6PS-39D3-16F
33 3GA-4PS-33D3-20T 20 39 93 10GDxx-4PS-93D4-32T 88 33 25GExx-4PS-33D3-32F 122 52 40GFxx-6PS-52D4-16F
H4 32/5.3 39 3GBxx-2PS-39D2-32T 21 40 161 139 10GDxx-4PS-139D5-32T 66 25GExx-4PS-66D4-32F 124 65 40GFxx-6PS-65D5-16F
66 3GBxx-2PS-66D3-32T 22 42 H4 32/5.3 39 10GExx-2PS-39D2-32T 28 81 165 96 25GExx-4PS-96D5-32F 126 50 H2 10/1.6 23 50GFxx-4PS-23D1-10T 30 169
H4+ 40/6.6 39 3GCxx-2PS-39D2-40T 23 41 162 65 10GExx-2PS-65D3-32T 84 H4+ 20/3.3 23 25GFxx-4PS-23D1-20T 30 168 39 50GFxx-4PS-39D2-10T
66 3GCxx-2PS-66D3-40T 24 43 131 10GExx-2PS-131D4-32T 89 39 25GFxx-4PS-39D2-20T 59 50GFxx-4PS-59D4-10T
131 3GCxx-2PS-131D4-40T 44 196 10GExx-2PS-196D5-32T 59 25GFxx-4PS-59D4-20T H3 1.5 to 15 23 50GFxx-4PS-23D1-13F 30 169
H4 64/10.5 262 3GCxx-1PS-262D4-64T 25 - 15 H3 16/2.6 20 15GCxx-4PS-20D2-16T 25 90 163 H4+ 2.5 to 25 23 25GFxx-4PS-23D1-25F 30 168 39 50GFxx-4PS-39D2-13F
26 33 15GCxx-4PS-33D3-16T 26 97 39 25GFxx-4PS-39D2-25F 59 50GFxx-4PS-59D4-13F
5 H4 20/3.3 20 5GBxx-4PS-20D2-20T 21 45 161 66 15GCxx-4PS-66D4-16T 59 25GFxx-4PS-59D4-25F H4 10/1.6 26 50GFxx-6PS-26D2-10T
33 5GBxx-4PS-33D3-20T 22 47 H3 25/4.2 20 15GCxx-4PS-20D2-25T 25 91 163 30 H3 10/1.6 20 30GExx-4PS-20D2-10T 28 127 166 39 50GFxx-6PS-39D3-10T
H4+ 25/4.0 39 5GCxx-2PS-39D2-25T 23 49 162 33 15GCxx-4PS-33D3-25T 26 98 33 30GExx-4PS-33D3-10T 129 52 50GFxx-6PS-52D4-10T
66 5GCxx-2PS-66D3-25T 24 53 66 15GCxx-4PS-66D4-25T 66 30GExx-4PS-66D4-10T 131 65 50GFxx-6PS-65D5-10T
131 5GCxx-2PS-131D4-25T 58 H4 12/2.0 28 15GDxx-4PS-28D2-12T 27 94 164 96 30GExx-4PS-96D5-10T 133 H4 0.6 to 13 26 50GFxx-6PS-26D2-13F
H4 40/6.6 39 5GCxx-2PS-39D2-40T 23 50 162 46 15GDxx-4PS-46D3-12T 101 H3 16/2.6 20 30GExx-4PS-20D2-16T 28 128 166 39 50GFxx-6PS-39D3-13F
66 5GCxx-2PS-66D3-40T 24 54 93 15GDxx-4PS-93D4-12T 106 33 30GExx-4PS-33D3-16T 130 52 50GFxx-6PS-52D4-13F
131 5GCxx-2PS-131D4-40T 59 139 15GDxx-4PS-139D5-12T 66 30GExx-4PS-66D4-16T 132 65 50GFxx-6PS-65D5-13F
H4 64/10.6 39 5GCxx-2PS-39D2-64T 23 51 162 H4 20/3.3 28 15GDxx-4PS-28D2-20T 27 95 164 96 30GExx-4PS-96D5-16T 134 H4+ 10/1.6 20 50GFxx-8PS-20D2-10T
66 5GCxx-2PS-66D3-64T 24 55 46 15GDxx-4PS-46D3-20T 102 H3 2.0 to 20 20 30GExx-4PS-20D2-25F 28 128 166 30 50GFxx-8PS-30D3-10T
131 5GCxx-2PS-131D4-64T 60 93 15GDxx-4PS-93D4-20T 107 33 30GExx-4PS-33D3-25F 130 50GFxx-8PS-..D4-10T
H4+ 20/3.3 20 5GCxx-4PS-20D2-20T 23 46 162 139 15GDxx-4PS-139D5-20T 66 30GExx-4PS-66D4-25F 132 H4+ 0.6 to 12 20 50GFxx-8PS-20D2-12V
33 5GCxx-4PS-33D3-20T 24 48 H4 32/5.3 28 15GDxx-4PS-28D2-32T 27 96 164 96 30GExx-4PS-96D5-25F 134 30 50GFxx-8PS-30D3-12V
66 5GCxx-4PS-66D4-20T 56 46 15GDxx-4PS-46D3-23T 103 H4+ 16/2.6 23 30GFxx-4PS-23D1-16T 30 168 50GFxx-8PS-..D4-12V
H4+ 40/6.6 56 5GDxx-2PS-56D2-40T 27 52 164 93 15GDxx-4PS-93D4-23T 108 39 30GFxx-4PS-39D2-16T 60 H4 0.5 to 11 26 60GFxx-6PS-26D2-11V
93 5GDxx-2PS-93D3-40T 57 139 15GDxx-4PS-139D5-32T 59 30GFxx-4PS-59D4-16T 39 60GFxx-6PS-39D3-11V
186 5GDxx-2PS-186D4-40T 61 H4+ 20/3.3 20 15GExx-4PS-20D2-20T 28 92 166 H4+ 2.0 to 20 23 30GFxx-4PS-23D1-20F 30 168 52 60GFxx-6PS-52D4-11V
278 5GDxx-2PS-278D5-40T 33 15GExx-4PS-33D3-20T 99 39 30GFxx-4PS-39D2-20F 65 60GFxx-6PS-65D5-11V
on request
7.5 H3 16/2.6 20 7.5GBxx-4PS-20D2-16T 21 62 161 66 15GExx-4PS-66D4-20T 104 59 30GFxx-4PS-59D4-20F 70 H3 8/1.2 26 70GFxx-6PS-26D2-8T
33 7.5GBxx-4PS-33D3-16T 22 65 96 15GExx-4PS-96D5-20T 109 35 H4 16/2.6 23 35GFxx-4PS-23D1-16T 30 168 39 70GFxx-6PS-39D3-8T
H3 32/5.3 39 7.5GCxx-2PS-39D2-32T 25 68 163 H4+ 32/5.3 20 15GExx-4PS-20D2-32T 28 93 166 39 35GFxx-4PS-39D2-16T 52 70GFxx-6PS-52D4-8T
66 7.5GCxx-2PS-66D3-32T 26 70 33 15GExx-4PS-33D3-32T 100 59 35GFxx-4PS-59D4-16T 65 70GFxx-6PS-65D5-8T
132 7.5GCxx-2PS-132D4-32T 66 15GExx-4PS-66D4-32T 105 H4 2.0 to 20 23 35GFxx4PS-23D1-20F 30 168 H3 0.5 to 11 26 70GFxx-6PS-26D2-11V
H4+ 20/3.3 20 7.5GCxx-4PS-20D2-20T 23 63 162 96 15GExx-4PS-96D5-32T 110 39 35GFxx4PS-39D2-20F 39 70GFxx-6PS-39D3-11V
33 7.5GCxx-4PS-33D3-20T 24 66 20 H4 16/2.6 20 20GExx-4PS-20D2-16T 28 111 166 59 35GFxx4PS-59D4-20F 52 70GFxx-6PS-52D4-11V
66 7.5GCxx-4PS-66D4-20T 71 33 20GExx-4PS-33D3-16T 113 H4+ 13/2.1 26 35GFxx-6PS-26D2-13T 65 70GFxx-6PS-65D5-11V
H4+ 32/5.3 20 7.5GCxx-4PS-20D2-32T 23 64 162 66 20GExx-4PS-66D4-16T 115 39 35GFxx-6PS-39D3-13T H4 0.6 to 12 20 70GFxx-8PS-20D2-12V
33 7.5GCxx-4PS-33D3-32T 24 67 96 20GExx-4PS-96D5-16T 117 52 35GFxx-6PS-52D4-13T 30 70GFxx-8PS-30D3-12V
on request
66 7.5GCxx-4PS-66D4-32T 72 H4 25/4.2 20 20GExx-4PS-20D2-25T 28 112 166 65 35GFxx-6PS-65D5-13T 70GFxx-8PS-..D4-12V
H4 40/6.6 56 7.5GDxx-2PS-56D2-40T 27 69 164 33 20GExx-4PS-33D3-25T 114 H4+ 0.8 to 16 26 35GFxx-6PS-26D2-16F 85 H2 0.4 to 8 26 85GFxx-6PS-26D2-8V
93 7.5GDxx-2PS-93D3-40T 73 66 20GExx-4PS-66D4-25T 116 39 35GFxx-6PS-39D3-16F 39 85GFxx-6PS-39D3-8V
186 7.5GDxx-2PS-186D4-40T 74 96 20GExx-4PS-96D5-25T 118 52 35GFxx-6PS-52D4-16F 52 85GFxx-6PS-52D4-8V
278 7.5GDxx-2PS-278D5-40T H4+ 25/4.2 23 20GFxx-4PS-23D1-20P 30 168 65 35GFxx-6PS-65D5-16F 65 85GFxx-6PS-65D5-8V
10 H4 20/3.3 20 10GCxx-4PS-20D2-20T 23 75 162 39 20GFxx-4PS-39D2-20P 40 H3 12/2.0 23 40GFxx-4PS-23D1-12T 30 168 H3 0.4 to 8 20 85GFxx-8PS-20D2-8V
33 10GCxx-4PS-33D3-20T 24 79 59 20GFxx-4PS-59D4-20P 39 40GFxx-4PS-39D2-12T 30 85GFxx-8PS-30D3-8V
66 10GCxx-4PS-66D4-20T 85 59 40GFxx-4PS-59D4-12T 85GFxx-8PS-..D4-8V
LASTPAGE_US.FM
110 H2 0.3 to 6 20 110GFxx-8PS-20D2-6V

30 110GFxx-8PS-30D3-6V
110GFxx-8PS-..D4-6V
07.08 189
Double reeved Quick Selection Chart Double reeved
for Hoist Models
Lifting Height
Lifting Height
Lifting Speed
Lifting Speed
Hoist Model No. Hoist Model No.
Duty Class
Duty Class
Girder Trolley
Girder Trolley
Capacity
Capacity
Base Hoist
Base Hoist
Monorail
Monorail
Double
Double
Trolley
Trolley
[tons] HMI [fpm] [ft] [tons] HMI [fpm] [ft]
1 H4+ 40/6.6 20 1GAxx-2PD-20D2-20T 19 135 160 20 H4+ 25/4.1 21 20GFxx-4PD-21D2-25T 31 170
36 1GAxx-2PD-36D3-20T 20 136 33 20GFxx-4PD-33D3-25T
H4 40/6.6 78 1GBxx-1PD-78D3-40T 21 - 44 20GFxx-4PD-44D4-25T
22 25 H4 12/2.0 20 25GExx-4PD-20D3-12T 29 167
2 H4 20/3.3 18 2GBxx-2PD-18D2-40T 21 137 161 46 25GExx-4PD-46D4-12T
34 2GBxx-2PD-34D3-40T 22 138 73 25GExx-4PD-73D5-12T
3 H4 20/3.3 18 3GBxx-2PD-18D2-20T 21 139 161 H4 20/3.3 20 25GExx-4PD-20D3-20T 29 167
34 3GBxx-2PD-34D3-20T 22 140 46 25GExx-4PD-46D4-20T
H4 48/8.0 42 3GCxx-1PD-42D2-48T 25 - 73 25GExx-4PD-73D5-20T
78 3GCxx-1PD-78D3-48T 26 H4+ 20/3.3 21 25GFxx-4PD-21D2-20T 31 170
170 3GCxx-1PD-170D4-48T 33 25GFxx-4PD-33D3-20T
5 H4 25/4.1 21 5GCxx-2PD-21D2-25T 23 141 162 44 25GFxx-4PD-44D4-20T
39 5GCxx-2PD-39D3-25T 24 142 H4+ 2.5 to 25 21 25GFxx-4PD-21D2-25V 31 170
85 5GCxx-2PD-85D4-25T 143 33 25GFxx-4PD-33D3-25V
7.5 H3 25/4.1 21 7.5GCxx-2PD-21D2-25T 25 144 163 44 25GFxx-4PD-44D4-25V
39 7.5GCxx-2PD-39D3-25T 26 145 30 H3 10/1.6 20 30GExx-4PD-20D3-10T 29 167
85 7.5GCxx-2PD-85D4-25T 46 30GExx-4PD-46D4-10T
10 H4 20/3.3 20 10GExx-2PD-20D2-20T 28 146 165 73 30GExx-4PD-73D5-10T
41 10GExx-2PD-41D3-20T 148 H3 16/2.6 20 30GExx-4PD-20D3-16T 29 167
93 10GExx-2PD-93D4-20T 150 46 30GExx-4PD-46D4-16T
146 10GExx-2PD-146D5-20T 73 30GExx-4PD-73D5-16T
H4 32/5.3 20 10GExx-2PD-20D2-32T 28 147 165 H3 2 to 20 20 30GExx-4PD-20D3-20V 29 167
41 10GExx-2PD-41D3-32T 149 46 30GExx-4PD-46D4-20V
93 10GExx-2PD-93D4-32T 151 73 30GExx-4PD-73D5-20V
146 10GExx-2PD-146D5-32T H4+ 16/2.6 21 30GFxx-4PD-21D2-16T 31 170
H4+ 20/3.3 21 10GExx-4PD-21D3-20T 29 167 33 30GFxx-4PD-33D3-16T
47 10GExx-4PD-47D4-20T 44 30GFxx-4PD-44D4-16T
73 10GExx-4PD-73D5-20T H4+ 2 to 20 21 30GFxx-4PD-21D2-20V 31 170
H4+ 32/5.3 21 10GExx-4PD-21D3-32T 29 167 33 30GFxx-4PD-33D3-20V
47 10GExx-4PD-47D4-32T 44 30GFxx-4PD-44D4-20V
73 10GExx-4PD-73D5-32T 35 H4 16/2.6 21 35GFxx-4PD-21D2-16T 31 170
15 H3 20/3.3 20 15GExx-2PD-20D2-20T 28 152 165 33 35GFxx-4PD-33D3-16T
41 15GExx-2PD-41D3-20T 154 44 35GFxx-4PD-44D4-16T
93 15GExx-2PD-93D4-20T 156 H4 2 to 20 21 35GFxx-4PD-21D2-20V 31 170
H3 32/5.3 20 15GExx-2PD-20D2-32T 28 153 165 44 35GFxx-4PD-44D4-20V
41 15GExx-2PD-41D3-32T 155 40 H4 12/2.0 21 40GFxx-4PD-21D2-12T 31 170
93 15GExx-2PD-93D4-32T 157 33 40GFxx-4PD-33D3-12T
H4+ 12/2.0 20 15GExx-4PD-20D3-12T 29 167 H4 1.5 to 15 21 40GFxx-4PD-21D2-16V 31 170
H4+ 20/3.3 20 15GExx-4PD-20D3-20T 29 167 50 H2 10/1.6 21 50GFxx-4PD-21D2-10T 31 171
H4+ 32/5.3 20 15GExx-4PD-20D3-32T 29 167 H2 .6 to 12 21 50GFxx-4PD-21D2-12V 31 171
20 H4 16/2.6 20 20GExx-4PD-20D3-16T 29 167 H4 10/1.6 21 50GFxx-5PD-21D2-10T 31 172
73 20GExx-4PD-73D5-16T 45 50GFxx-5PD-45D4-10T © 2008, Morris Material Handling
H4 25/4.2 20 20GExx-4PD-20D3-25T 29 167 H4 1.3 to 13 21 50GFxx-5PD-21D2-13V 31 172 Technical Publications
LASTPAGE_US.FM
Oak Creek, WI 53154

1-800-933-3001
Bulletin
07.08 190

G-Series Catalog

Uploaded by

Copyright:

Available Formats

G-Series Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

G-Series Catalog

Uploaded by

Copyright:

Available Formats

G Series Wire Rope Hoists

lbs Weight [lbs]

Dimensions see page ..

Wire rope hoist

s/h Starts per hour

Technical Features of G Series Hoist Models A, B, C, D, E.........................................................................5

Technical Features of G Series Hoist Models F............................................................................................9

Model Number Key...........................................................................................................................................10

Hoist Model Selection Chart ..........................................................................................................................11

Specifications and Cut-sheets.......................................................................................................................19

Short Headroom Monorail Trolleys - Single reeved ..................................................................................32

Short Headroom Monorail Trolleys - Double reeved ...............................................................................135

Standard Headroom Monorail Trolleys - Single / Double reeved..........................................................158

Double Girder Top Running Trolleys............................................................................................................160

Equipment and Options..................................................................................................................................173

A020 Geared Upper & Lower Limit Switch ...........................................................................................................174

A190 Articulated Trolleys ........................................................................................................................................178

Components and Accessories......................................................................................................................182

B050 Load Hooks.......................................................................................................................................................185

Technical Data ................................................................................................................................................187

C070 Travel Motors Hoist Models A - E.................................................................................................................187

Quick Selection Chart....................................................................................................................................189

Technical Features of G Series Hoist Models A, B, C, D, E

Frame size A, B, C Frame size D, E

Basic hoist versions

Base mounted hoist

Non-twist free rope Twist free rope

Rope drive and drum

Bottom block and load hook

Monorail and Double Girder Trolleys

Standard surface protection

Quality Management System / Factory test

Technical Features of G Series Hoist Models F

Basic hoist versions

Rope drive and drum

OE Double Girder Trolleys

and long lifetime.

Model Number Key

T = Two speed hoist motor

Lifting speed [fpm]

Drum length D2, D3, D4, D5

Height of Lift [ft]

Configuration SH = monorail trolley, short headroom

Hoist Model Selection Chart

*1 Spw 55 1/8, D3 only up to 6 tons

*1 Spw 88 3/16, D4 only up to 25 tons

2m H4 0.6 to 13 26 50GFxx-6PS-26D2-13F 4H81 60 25 5,490

2PS 4PS 2PD 2PS 4PS 2PD 2PS 4PS 2PD

2 15/16 1 1/8 1 1/8 2 15/16

2PS 4PS 2PD 2PS 4PS 2PD 2PS 4PS 2PD

2 15/16 1 1/8 1 1/8 2 15/16

Rope departure angles and angles of installation *5 Lock washer (Schnorr)

Rope departure angles and angles of installation *5 Lock washer (Schnorr)

4PD (8/2-1) 4PD (8/2-1) Hoist Motor Type

Rope departure angles and angles of installation

4PS (4/1) 4PS (4/1) Hoist Motor Type

E = Electrical installation *5 Lock washer (Schnorr)

E = Electrical installation *5 Lock washer (Schnorr)

Capacity 15 tons Hoist Motor Type 2/12 H72 Headroom C 56

Capacity 15 tons Hoist Motor Type 2/12 H73 Headroom C 56

* Standard = 11 3/4 2 Only up to B < 7 7/8 7 Smaller radius of bend on request

* Standard = 11 3/4 2 Only up to B < 7 7/8 7 Smaller radius of bend on request

4 Spw 88 3/16, D4 only up to 25 tons 6 Spw 124, D5 only up to 25 tons