SAUDIARAMCO.

FINAL CONTROL ELEMENT SYMBOLS FINAL CONTROL ELEMENT ACTUATOR SYMBOLS SELF-ACTUATOR FINAL CONTROL ELEMENT SYMBOLS NOTES:

NO. SYMBOL DESCRIPTION NO. SYMBOL DESCRIPTION NO. SYMBOL DESCRIPTION

A) * GENERIC TWO-WAY VALVE. * AUTOMATIC FLOW REQULATOR.

* GENERIC ACTUATOR. XXX
1 * STRAIGHT GLOBE VALVE 1 1 * XXX = FCV WITHOUT INDICATOR.
* SPRING-DIAPHRAGM ACTUATOR.
* GATE VALVE * XXX = FICV WITH INTEGRAL INDICATOR.
B)

OF
CONSENT
(3) FICV
* GENERIC TWO-WAY ANGLE VALVE. (A)
* VARIABLE AREA FLOWMETER WITH INTEGRAL MANUAL ADJUSTING VALVE.
* ANGLE GLOBE VALVE * SPRING-DIAPHRAGM ACTUATOR WITH POSITIONER. 2 * INSTRUMENT TAG BUBBLE REQUIRED WITH (B)
2 2
* SAFETY ANGLE VALVE (B)

TTEN
* GENERIC THREE-WAY VALVE. * CONSTANT FLOW REGULATOR.
3 FICV

WRI
3 * THREE-WAY GLOBE VALVE 3 * PRESSURE-BALANCED DIAPHRAGM ACTUATOR.
* ARROW INDICATES FAILURE OR UNACTUATED FLOW PATH.

THE
FG
* FLOW SIGHT GLASS.
* GENERIC FOUR-WAY VALVE. * LINEAR PISTON ACTUATOR. 4 * TYPE SHALL BE NOTED IF MORE THAN ONE TYPE USED.

THOUT
4 * FOUR-WAY GLOBE VALVE 4 * SINGLE ACTING SPRING OPPOSED.
* ARROW INDICATES FAILURE OR UNACTUATED FLOW PATH. * DOUBLE ACTING.

WI
FO * GENERIC FLOW RESTRICTION.

5 * SINGLE STAGE ORIFICE PLATE AS SHOWN.

NG
* NOTE REQUIRED FOR MULTI-STAGE OR CAPILLARY TUBE TYPES.

DRAWI
5 * BUTTERFLY VALVE. 5 * LINEAR PISTON ACTUATOR WITH POSITIONER.

FO * RESTRICTION ORIFICE HOLE DRILLED IN THE VALVE PLUG.

6 * TAG NUMBER SHALL BE OMITTED IF VALVE IS OTHERWISE IDENTIFIED.

S
THI
* ROTARY PISTON ACTUATOR.
6 * BALL VALVE. 6 * MAY BE SINGLE ACTING SPRING OPPOSED OR DOUBLE ACTING.

FROM
* LEVEL REGULATOR.

7 TANK * BALL FLOAT AND MECHANICAL LINKAGE.

NED
7 * PLUG VALVE. 7 * ROTARY PISTON ACTUATOR WITH POSITIONER.

OBTAI
* BACKPRESSURE REGULATOR.

8 * INTRNAL PRESSURE TAP.

BE
8 * ECCENTRIC ROTARY DISC VALVE. 8 * BELLOWS SPRING OPPOSED ACTUATOR.

PART,SHALL
* BACKPRESSURE REGULATOR.

9 * EXTERNAL PRESSURE TAP.

* ROTARY MOTOR OPERATED ACTUATOR.

9 * DIAPHRAGM VALVE. 9 M * ELECTRIC, PNEUMATIC, OR HYDRAULIC.

A)
* LINEAR OR ROTARY ACTION.
* PRESSURE-REDUCING REGULATOR.
REFERENCE DRAWINGS
B) * INTRNAL PRESSURE TAP. DWG. CONTROL FOR J.O.
10

N
I
FULL,OR
* MODULATING SOLENOID ACTUATOR.
* PINCH VALVE. S
10 10 * SOLENOID ACTUATOR FOR PROCESS ON-OFF VALVE.
* PRESSURE-REDUCING REGULATOR.

11 * EXTERNAL PRESSURE TAP.

N
I ON
11 * BELLOWS SEALED VALVE. 11 * ACTUATOR WITH SIDE-MOUNTED HANDWEEL.
* DEFFERENTIAL PRESSURE REGULATOR.

REPRODUCTI
12 * EXTERNAL PRESSURE TAPS.

* GENERIC DAMPER.
12 12 * ACTUATOR WITH TOP-MOUNTED HANDWEEL. * DEFFERENTIAL PRESSURE REGULATOR.
* GENERIC LOUVER.
13 * EXTERNAL PRESSURE TAPS.

SAUDIARAMCO.NO
* PARALLEL BLADE DAMPER. * MANUAL ACTUATOR.
* PRESSURE-REDUCING REGULATOR W/ INTEGRAL OUTLET PRESSURE
13 * PARALLEL BLADE LOUVER.
13 * HAND ACTUATOR.
14 RELIEF AND PRESSURE GAUGE.
PG

* OPPOSED BLADE DAMPER. * GENERIC PRESSURE SAFETY VALVE.

14 14 E * ELECTROHYDRAULIC LINEAR OR ROTARY ACTUATOR.
* OPPOSED BLADE LOUVER. H 15 * PRESSURE RELIEF VALVE.

OF
PROPERTY
* GENERIC VACUUM SAFETY VALVE.

15 * TWO-WAY ON-OFF SOLENOID VALVE. 15 * ACTUATOR WITH MANUAL ACTUATED PARTIAL STROKE TEST DEVICE. 16 * VACUUM RELIEF VALVE.

SOLE
* GENERIC PRESSURE-VACUUM RELIEF VALVE.
* ANGLE ON-OFF SOLENOID VALVE. * ACTUATOR WITH REMOTE ACTUATED PARTIAL STROKE TEST DEVICE. 17 * TANK PRESSURE-VACUUM RELIEF VALVE.
16 16 S

THE
ARE
* PRESSURE SAFETY ELEMENT.

* THREE-WAY ON-OFF SOLENOID VALVE. 18 * PRESSURE RUPTURE DISK.

* AUTOMATIC RESET ON-OFF SOLENOID ACTUATOR.
17 17 S
* ARROW INDICATES DE-ENERGIZED FLOW PATH. * PRESSURE RELIEF.
* LATCHING ON-OFF SOLENOID ACTUATOR.

N
HEREI
* PRESSURE SAFETY ELEMENT.

19 * VACUUM RUPTURE DISK.

NED
* FOUR-WAY PLUG OR BALL ON-OFF SOLENOID VALVE. * MANUAL OR REMOTE RESET ON-OFF SOLENOID ACTUATOR.
S * VACUUM RELIEF.
18 * ARROWS INDICATE DE-ENERGIZED FLOW PATHS.
18 * LATCHING ON-OFF SOLENOID ACTUATOR.
R

CONTAI
REVISION VALIDATION

* TEMPERATURE REGULATOR.
20 THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
* FILLED THERMAL SYSTEM. REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
* FOUR-WAY FIVE-PORTED ON-OFF SOLENOID VALVE. * MANUAL AND REMOTE RESET ON-OFF SOLENOID ACTUATOR.
19 19 S

ON
* ARROWS INDICATE DE-ENERGIZED FLOW PATHS. R R * LATCHING ON-OFF SOLENOID ACTUATOR. 30004827-0418-001

NFORMATI
DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
(DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)

* THERMAL SAFETY ELEMENT. ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE

21 TANK YYA FAS YAA FAS

TSE * FUSIBLE PLUG OR DISK. 08/08/18 08/08/18 08/08/18 08/08/18

20 * PERMANENT MAGNET VARIABLE SPEED COUPLING. 20

REV.NO. DATE REVISION DESCRIPTION
* SPRING OR WEIGHT ACTUATED RELIEF OR SAFETY VALVE ACTUATOR.

I
00 04/04/18 NEW DRAWING

THE
JOB ORDER/EWO NO.
* GENERIC MOISTURE TRAP. THIS REVISION IS NOT TO BE USED FOR

* STEAM TRAP.
30004827 CONSTRUCTION UNTIL CERTIFIED AND DATED
22
* NOTE REQUIRED FOR OTHER TRAP TYPES. SAUDI ARABIAN OIL COMPANY

AND
T
* ELECTRIC MOTOR. P * PILOT ACTUATED RELIEF OR SAFETY VALVE ACTUATOR.
21 21 DRAWING TYPE

* PILOT PRESSURE SENSING LINE DELETED IF SENSING IS INTERNAL. FINAL CONTROL ELEMENT SYMBOLS STD

NG
FINAL CONTROL ELEMENT AND ACTUATOR

DRAWI
TANK
23 * MOISTURE TRAP WITH EQUALIZING LINE.
SELF-ACTUATOR FINAL CONTROL ELEMENT
T
STD. DWG. SAUDI ARABIA

S
PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

THI
990 J AA-036196 001 00
Saudi Aramco 2615 ENG. (05/05)

RESTRICTED VECTOR CADD-05