Normas

ACI INTERNATIONAL (ACI)
ACI 117 (1990) Standard Specification for Tolerances for

Concrete Construction and Materials
ACI 211.1 (1997) Standard Practice for Selecting Proportions

for Normal, Heavyweight, and Mass Concrete
ACI 301 (1999) Specifications for Structural Concrete
ACI 302.1R (1996) Guide for Concrete Floor and Slab

Construction
ACI 304R (2000) Guide for Measuring, Mixing, Transporting,

and Placing Concrete
ACI 305R (1999) Hot Weather Concreting
ACI 306R (1988) Cold Weather Concreting
ACI 308R (2001) Standard Practice for Curing Concrete
ACI 315 (1999) Details and Detailing of Concrete

Reinforcement
ACI 318/318R (2002) Building Code Requirements for Structural

Concrete and Commentary
ACI 325.9R (1991) Guide for Construction of Concrete Pavements

and Concrete Bases
ACI 347 (1989) Formwork for Concrete
ACI 347R (2003) Guide to Formwork for Concrete
ACI 503.2 (1992) Standard Specification for Bonding Plastic

Concrete to Hardened Concrete with a
Multi-Component Epoxy Adhesive
ACI 503R (1993) Use of Epoxy Compounds with Concrete
ACI 530.1 (2002) Specification for Masonry Structures
ACI COMP 21 (1993) Elevated Slabs
ACI SP-66 (1994) ACI Detailing Manual
AIR CONDITIONING AND REFRIGERATION INSTITUTE (ARI)
ARI 1010 (2002) Self Contained Mechanically Refrigerated

Drinking Water Coolers
ARI 210/240 (2003) Unitary Air-Conditioning and Air-Source Heat

Pump Equipment
ARI 270 (1995) Sound Rating of Outdoor Unitary Equipment
Page 1
ARI 340/360 (2000) Commercial and Industrial Unitary
Air-Conditioning Equipment and Heat Pump Equipment
ARI 410 (2001) Forced-Circulation Air-Cooling and

Air-Heating Coils
ARI 430 (1999) Central-Station Air-Handling Units
ARI 440 (1998) Room Fan-Coil
ARI 450 (1999) Water-Cooled Refrigerant Condensers, Remote

Type
ARI 460 (2000) Remote Mechanical - Draft Air-Cooled,

Refrigerant Condensers
ARI 480 (2001) Refrigerant-Cooled Liquid Coolers, Remote

Type
ARI 495 (1999) Refrigerant Liquid Receivers
ARI 520 (1997) Positive Displacement Condensing Units
ARI 550/590 (1998) Water-Chilling Packages Using the Vapor

Compression Cycle
ARI 620 (1996) Self Contained Humidifiers for Residential

Applications
ARI 880 (1998) Air Terminals
AIR DIFFUSION COUNCIL (ADC)
ADC 1062:GRD (2000) Test Codes for Grilles, Registers, and

Diffusers
ADC-01 (2001) Directory of ADC Certified Products
AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL (AMCA)
AMCA 210 (1999) Laboratory Methods of Testing Fans for Rating
AMCA 211 (1994) Certified Ratings Program - Air Performance
AMCA 300 (1996) Reverberant Room Method for Sound Testing of

Fans
AMCA 301 (1990) Methods for Calculating Fan Sound Ratings

from Laboratory Test Data
AMCA 302 (1998) Application of Sone Ratings
AMCA 500 (1999) Test Methods for Louvers, Dampers and

Shutters
AMCA 99 (1991; AMCA 99-0401) Standards Handbook
Page 2
ALUMINUM ASSOCIATION (AA)
AA 45 (2003) Designation System for Aluminum Finishes
AA ASD1 (2003) Aluminum Standards and Data
AA DAF-45 (1997) Designation System for Aluminum Finishes
AA SAS-30 (1996) Specifications for Aluminum Structures

Construction Manual Series Section 1
AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)
AAMA 101 (1999) Voluntary Guide Specifications for Aluminum

and Polyvinylchloride (PVC) Prime Windows and
Sliding Glass Doors
AAMA 701 (1992) Voluntary Specification for Pile Weather

Strip
AAMA 800 (1992) Voluntary Specifications and Test Methods

for Sealants
AAMA 902 (1992) Voluntary Specification for Sash Balances
AAMA WSG.1 (1995) Window Selection Guide
AMERICAN ASSOCIATION OF STATE HIGHWAY AND TRANSPORTATION OFFICIALS

(AASHTO)
AASHTO M 111 (1990) Standard Specification for Zinc (Hot-Dip

Galvanized) Coatings on Iron and Steel, Products
AASHTO M 133 (2003) Preservatives and Pressure Treatment

Processes for Timber
AASHTO M 145 (1991; R 2003) Classification of Soils and

Soil-Aggregate Mixtures for Highway Construction
Purposes
AASHTO M 147 (1965; R 2000) Materials for Aggregate and

Soil-Aggregate Subbase, Base and Surface Courses
AASHTO M 182 (1991; R 2000) Burlap Cloth Made from Jute or Kenaf
AASHTO M 198 (2003) Joints for Circular Concrete Sewer and

Culvert Pipe Using Flexible Watertight Gaskets
AASHTO M 200 (1973; Rev 2000) Epoxy Protective Coatings
AASHTO M 218 (2003) Steel Sheet Zinc-Coated (Galvanized) for

Corrugated Steel Pipe
AASHTO M 288 (2000) Interim Geotextile Specification for Highway

Applications
AASHTO M 306 (2000) Drainage Structure Castings
Page 3
AASHTO M 314 (1990; R 2000) Steel Anchor Bolts
AASHTO M 92 (2003) Wire-Cloth Sieves for Testing Purposes
AASHTO T 103 (1991: R 2000) Soundness of Aggregates by Freezing

and Thawing
AASHTO T 180 (2001) Moisture-Density Relations of Soils Using a

4.54-kg (10-lb) Rammer and a 457-mm (18-in.) Drop
AASHTO T 2 (2000) Sampling of Aggregates
AASHTO T 26 (1979; R 2000) Quality of Water to be Used in

Concrete
AASHTO T 87 (1986; R 2000) the Dry Preparation of Disturbed

Soil and Soil Aggregate Samples for Test
AASHTO T 89 (2002) Determining the Liquid Limit of Soils
AASHTO T 90 (2000) Determining the Plastic Limit and Plasticity

Index of Soils
AMERICAN BEARING MANUFACTURERS ASSOCIATION (ABMA)
ABMA 11 (1990; R 2000) Load Ratings and Fatigue Life for

Roller Bearings
ABMA 9 (1990; R 2000) Load Ratings and Fatigue Life for

Ball Bearings
AMERICAN CONCRETE PIPE ASSOCIATION (ACPA)
ACPA O1-103 (1999) Concrete Pipe Installation Manual
AMERICAN GAS ASSOCIATION (AGA)
AGA B109.1 (2000) Diaphragm-Type Gas Displacement Meters

(Under 500 cubic ft./hour Capacity)
AGA B109.2 (2000) Diaphragm-Type Gas Displacement Meters (500

cubic ft./hour Capacity and Over)
AGA Manual (1994) Plastic Pipe Manual for Gas Service
AGA Z21.13 (1991) Gas-Fired Low-Pressure Steam and Hot Water

Boilers
AGA Z21.22 (1999) Standard for Relief Valves for Hot Water
Supply Systems
AGA-02 (1998) Directory of AGA and CGA Certified

Appliances and Accessories
AMERICAN GEAR MANUFACTURERS ASSOCIATION (AGMA)
Page 4
AGMA 250.04 (1981) Lubrication of Industrial Enclosed Gear
Drives
AMERICAN HARDBOARD ASSOCIATION (AHA)
AHA A135.4 (1995) Basic Hardboard
AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)
AISC 303 (2000) Code of Standard Practice for Buildings and

Bridges
AISC 316 (1989; 9th Ed) Manual of Steel Construction,

Allowable Stress Design
AISC 317 (1992) Manual of Steel Construction, Volume II,

Connections
AISC 325 (2001) Manual of Steel Construction Load and

Resistance Factor Design
AISC 326 (2002) Detailing for Steel Construction
AISC 335 (1989) Specification for Structural Steel Buildings

Allowable Stress Design and Plastic Design with
Commentary
AISC 350 (1999) Load and Resistance Factor Design (LFRD)

Specification for Structural Steel Buildings
AISC M014 (1984; 1st Ed) Engineering for Steel Construction a

Source Book on Connections
AISC S329 (1996) Structural Joints Using ASTM A 325 or ASTM A

490 Bolts
AMERICAN INSTITUTE OF TIMBER CONSTRUCTION (AITC)
AITC 109-98 (1998) Standard for Preservative Treatment of

Structural Glue Laminated Timber
AITC 110-2001 (2001) Standard Appearance Grades for Structural

Glue Laminated Timber
AITC 111-79 (2001) Recommended Practice for Protection of

Structural Glue Laminated Timber During Transit,
Storage and Erection
AITC 113-2001 (2001) Standard for Dimensions of Structural Glue

Laminated Timber
AITC 117-2004 (2004) Standard Specifications for Structural Glue

Laminated Timber of Softwood Species
AITC 119-96 (1996) Standard Specifications for Structural Glue

Laminated Timber of Hardwood Species
Page 5
AITC 200-2004 (2004) Inspection Manual
AMERICAN IRON AND STEEL INSTITUTE (AISI)
AISI SG-671 (1989) Specification & Commentary for the Design of

Cold-Formed Steel Structural Members
AISI SG-913 (1991) LRFD Cold-Formed Steel Design Manual
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
ANSI 23 (1993) Methods of Testing for Rating Positive

Displacement Refrigerant Compressors and Condensing
Units
ANSI A108.1 (1999) Installation of Ceramic Tile, A Collection
ANSI A112.18.1M (1996) Plumbing Fixture Fittings
ANSI A112.19.1M (1987) Enameled Cast Iron Plumbing Fixtures
ANSI A112.19.2M (1982) Vitreous China Plumbing Fixtures
ANSI A112.19.3M (1987) Stainless Steel Plumbing Fixtures (Designed

for Residential Use)
ANSI A112.19.5 (1979) Trim for Water-Closet Bowls, Tanks, and

Urinals (Dimensional Standards)
ANSI A117.1 (1992) Standard for Buildings and Facilities and

Usability for physically handicapped people
ANSI A118.9 (1994) Test Methods and Specifications for

Cementitious Backer Units
ANSI A13.1 (1996) Scheme for the Identification of Piping

Systems
ANSI A136.1 (2000) Organic Adhesives for Installation of

Ceramic Tile
ANSI A137.1 (1988) Ceramic Tile
ANSI A208.1 (1993) Wood Particleboard
ANSI B18.13 (1997) Screw and Washer Assemblies
ANSI B18.13.1M (1991; R 1998) Screw and Washer Assemblies (Metric

Series)
ANSI B18.21.1 (2000) Lock Washers (Inch Series)
ANSI B18.21.2M (2000) Lock Washers (Metric Series)
ANSI B18.22.1 (1975; R 2003) Plain Washers
Page 6
ANSI B18.22M (1981; R 2000) Metric Plain Washers
ANSI B18.6.1 (1981; R 1997) Screw, Wood
ANSI B40.1 (1991; R 1997) Gauges - Pressure Indicating Dial

Type - Elastic Element
ANSI C135.30 (1988) Zinc-Coated Ferrous Ground Rods for Overhead

or Underground Line Construction
ANSI C135.6 (1988) Zinc-Coated Ferrous Crossarm Braces for

Overhead Line Construction
ANSI C136.3 (1995) Roadway Lighting Equipment - Luminaire

Attachments
ANSI C29.1 (1988; R 1996) Electrical Power Insulators - Test

Methods
ANSI C29.10 (1989; R 1995) Wet-Process Porcelain Insulators -

Indoor Apparatus Type
ANSI C29.2 (1992; R 1999) Insulators - Wet-Process Porcelain

and Toughened Glass - Suspension Type
ANSI C29.3 (1986; R 1995) Wet Process Porcelain Insulators -

Spool Type

Strain Type

High-Voltage Pin Type
ANSI C29.7 (1996) Porcelain Insulators - High-Voltage Line

Post Type
ANSI C37.09 (1979) IEEE Standard Test Procedure for AC

High-Voltage Circuit Breakers Rated on Symmetrical
Current Basis.
ANSI C37.121 (1989; R 2000) American National Standard for

Switchgear-Unit Substation-Requirements
ANSI C37.16 (2000) Low-Voltage Power Circuit Breakers and AC

Power Circuit Protectors - Preferred Ratings,
Related Requirements, and Application
Recommendations
ANSI C37.17 (1997) Trip Devices for AC and General-Purpose DC

Low-Voltage Power Circuit Breakers
ANSI C37.42 (1997) Specifications for High Voltage Expulsion

Type Distribution Class Fuses, Cutouts, Fuse
Disconnecting Switches and Fuse Links
ANSI C39.1 (1981; R 1992) Electrical Analog Indicating
Page 7
Instruments
ANSI C57.12.10 (1997) Standard for Transformers-230 kV and Below

833/958 Through 8333/10,417 kVA, Single-Phase, and
750/862 Through 60,000/80,000/100,000 kVA,
Three-Phase Without Load Tap Changing; and
3750/4687 Through 60,000/80,000/100,000 kVA With
Load Tap Changing - Safety Requirements
ANSI C57.12.20 (1997) Overhead-Type Distribution Transformers, 500

kVA and Smaller: High-Voltage, 34 500 Volts and
Below; Low Voltage, 7970/13 800 Y Volts and Below
ANSI C57.12.25 (1992) Standard for Pad-Mounted,

Compartmental-Type, Self-Cooled, Single-Phase
Distribution Transformers with Separable Insulated
High-Voltage Connectors (34 500-Grd Y/19 920 Volts
and Below; Low Voltage, 240/120; 167 kVA and
Smaller)
ANSI C57.12.26 (1992) Transformers - Pad-Mounted

Compartmental-Type, Self-Cooled, Three-Phase
Distribution Transformers for Use with Separable
Insulated High-Voltage Connectors, High Voltage,
(34 500 Grd Y/19 920 and Below; 2500 kVA and
Smaller)
ANSI C57.12.28 (1999) Pad-Mounted Equipment - Enclosure Integrity
ANSI C57.12.40 (2000) Subway and Vault Types (Liquid Immersed) -

Requirements
ANSI C57.99 (1965) Guide for Loading Dry-Type and Oil-Immersed

Current-Limiting Reactors Appendix to American
Standard Requirements Terminology, and Test Code
for Current-Limiting Reactors C57.16-1958
ANSI C63.2 (1996) Standard for Instrumentation -

Electromagnetic Noise and Field Strength, 10 kHz to
40 GHz - Specifications
ANSI C63.4 (2004) Methods of Measurement of Radio - Noise

Emissions from Low-Voltage Electrical and
Electronic Equipment in the Range of 9 kHz to 40 GHz
ANSI C78.1 (1991; R 1996) 18W, 24W, and 36W Single Ended
Fluorescent Lamps
ANSI C78.1350 (1990) Electric Lamps - 400-Watt, 100-Volt, S51

Single Ended, High-Pressure Sodium Lamps
ANSI C78.1352 (1990) 1000-Watt S52 High-Pressure Sodium Lamps
ANSI C78.1353 (1990) 70-Watt S62 High-Pressure Sodium Lamps
ANSI C78.1355 (1989) 150-Watt 55-Volt S55 High-Pressure Sodium

Lamps
Page 8
ANSI C78.23 (1995) Electric Lamps - Incandescent
Lamps-Miscellaneous Types
ANSI C78.3 (1991; C78.3d-1998; R 1996) Fluorescent Lamps -

Instant-Start and Cold-Cathode Types - Dimensional
and Electrical Characteristics
ANSI C78.387 (1995; R 2000) Electric Lamps - Metal-Halide Lamps

- Methods of Measuring Characteristics
ANSI C78.388 (1990; R 1994) Electric Lamps - High Pressure

Sodium Lamps
ANSI C78.41 (2001) Electric Lamps - Low Pressure Sodium Lamps
ANSI C80.1 (1994; R 1995) Rigid Steel Conduit - Zinc Coated
ANSI C80.3 (1994; R 1995) Electrical Metallic Tubing -

Zinc-Coated
ANSI C80.5 (1994: R 1995) Rigid Aluminum Conduit
ANSI C82.2 (2002) Fluorescent Lamp Ballasts - Methods of

Measurement
ANSI C82.5 (1990; R 1995) Reference Ballasts -

High-Intensity-Discharge and Low Pressure Sodium
Lamps
ANSI O5.1 (2002) Wood Poles - Specifications and Dimensions
ANSI S12.11 (1987; R 1997) Method for the Measurement of Noise

Emitted by Small Air-Moving Devices
ANSI S12.23 (1989; R 2001) Method for the Designation of Sound

Power Emitted by Machinery and Equipment
ANSI S12.30 (1990; R 2002) Guidelines for the Use of Sound

Power Standards and for the Preparation of Noise
Test Codes
ANSI S12.33 (2002) Engineering Methods for the Determination of

Sound Power Levels of Noise Sources in a Special
Reverberation Test Room
ANSI S2.40 (1997; R 2001) Mechanical Vibration of Rotating and

Reciprocating Machinery - Requirements for
Measuring Vibration Severity
ANSI S3.29 (1996; R 2001) Evaluation of Human Exposure to

Vibration in Buildings, Guide to
ANSI Z21.13 (2000) Gas-Fired Low-Pressure Steam and Hot Water

Boilers
ANSI Z358.1 (2004) Standard for Emergency Eyewash and Shower

Equipment
Page 9
ANSI Z535.1 (2002) Safety Color Code
ANSI Z83.8 (2002) Gas Unit Heater and Gas-Fired Duct Furnaces
First Edition
ANSI Z87.1 (2003) Practice for Occupational and Educational

Eye and Face Protection
ANSI Z97.1 (1984; R 1994) American National Standards for

Safety Glazing Material Used in Buildings - Safety
Performance Specifications and Methods of Test
ANSI/AITC A190.1-2002 (2002) American National Standard, Structural Glue

Laminated Timber
ANSI/SPRI ES-1 (2003) Wind Design Standard for Edge Systems Used
with Low Slope Roof Systems
AMERICAN NURSERY AND LANDSCAPE ASSOCIATION (ANLA)
ANLA Z60.1 (1996) Nursery Stock
AMERICAN PETROLEUM INSTITUTE (API)
API Spec 6D (2002) Specification for Pipeline Valves (Gate,

Plug, Ball and Check Valves)
API Std 1104 (1999; R 2001) Welding of Pipelines and Related

Facilities
AMERICAN RAILWAY ENGINEERING AND MAINTENANCE-OF-WAY ASSOCIATION

(AREMA)
AREMA Manual (2003) Manual for Railway Engineering (Fixed

Properties)
AMERICAN SOCIETY OF CIVIL ENGINEERS (ASCE)
ASCE 7 (2004) Minimum Design Loads for Buildings and Other

Structures
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING

ENGINEERS (ASHRAE)
ASHRAE 111 (1998) Practices for Measurement, Testing,

Adjusting, and Balancing of Building Heating,
Ventilation, Air-Conditioning, and Refrigeration
Systems
ASHRAE 113 (1990) Method of Testing for Room Air Diffusion
ASHRAE 130 (1996) Method of Testing for Rating Ducted Air

Terminal Units
ASHRAE 15 (2001) Safety Code for Mechanical Refrigeration
ASHRAE 51 (1999) Laboratory Methods of Testing Fans for
Page 10
Aerodynamic Performance Rating
ASHRAE 52.1 (1992) Gravimetric and Dust Spot Procedures for

Testing Air-Cleaning Devices Used in General
Ventilation for Removing Particulate Matter
ASHRAE 90.1 (2001) Energy Conservation in New Building Design
ASHRAE Gdl3 (1996) Reducing Emission of Halogenated

Refrigerants in Refrigeration and Air-Conditioning
Equipment and Systems
ASHRAE-02 (1999) Handbook, HVAC Applications (IP Edition)
ASHRAE-03 (1997) Handbook, Fundamentals (IP Edition)
ASHRAE-04 (1997) Handbook, Fundamentals (SI Edition)
ASHRAE-05 (1999) Handbook, HVAC Applications (SI Edition)
ASHRAE-06 (1997) Handbook, HVAC Systems and Equipment (IP

Edition)
ASHRAE-08 (1998) Handbook, Refrigeration Systems and

Applications (SI Edition)
ASHRAE-Hdbk SE-SI (2000) Handbook, HVAC Systems and Equipment (SI

Edition)
AMERICAN SOCIETY OF SAFETY ENGINEERS (ASSE)
BSR A10.24-200x Roofing-Safety Requirements for Low-Sloped Roofs
AMERICAN SOCIETY OF SANITARY ENGINEERING (ASSE)
ASSE 1003 (2001) Water Pressure Reducing Valves
ASSE 1010 (1996) Water Hammer Arresters
ASSE 1013 (1999) Reduced Pressure Principle Backflow

Preventers and Reduced Pressure Fire Protection
Principle Backflow Preventers
ASSE 1015 (1999) Double Check Backflow Prevention Assembly
ASSE 1037 (1990) Pressurized Flushing Devices (Flushometer)

for Plumbing Fixtures
AMERICAN WATER WORKS ASSOCIATION (AWWA)
AWWA C104/A21.4 (2003) Cement-Mortar Lining for Ductile-Iron Pipe

and Fittings for Water
AWWA C105 (1999) Polyethylene Encasement for Ductile-Iron

Pipe Systems
Page 11
AWWA C110 (1998) Ductile-Iron and Gray-Iron Fittings, 3 in.
Through 48 in. (76 mm through 1219 mm), for Water
Erratum: October 1999
AWWA C111 (2000) Rubber Gasket Joints for Ductile-Iron

Pressure Pipe and Fittings
AWWA C115 (1999) Flanged Ductile-Iron Pipe with Ductile-Iron

or Grey-Iron Threaded Flanges
AWWA C151 (2002) Ductile-Iron Pipe, Centrifugally Cast for

Water or Other Liquids
AWWA C200 (1997) Steel Water Pipe 6 in. (150 mm) and Larger
AWWA C203 (2002) Coal-Tar Protective Coatings and Linings for

Steel Water Pipelines - Enamel and Tape - Hot
Applied
AWWA C205 (2000) Cement-Mortar Protective Lining and Coating

for Steel Water Pipe - 4 in. and Larger - Shop
Applied
AWWA C206 (1997) Field Welding of Steel Water Pipe
AWWA C207 (2001) Steel Pipe Flanges for Waterworks

Service-Sizes 4 in. Through 144 in.
AWWA C208 (2001) Dimensions for Fabricated Steel Water Pipe

Fittings
AWWA C209 (2000) Cold-Applied Tape Coatings for the Exterior

of Special Sections, Connections and Fittings for
Steel Water Pipelines
AWWA C210 (2003) Liquid Epoxy Coating Systems for the

Interior and Exterior of Steel Water Pipelines
AWWA C220 (1998) Stainless Steel Pipe, 4 in. (100 mm) and
Larger
AWWA C300 (1997) Reinforced Concrete Pressure Pipe,

Steel-Cylinder Type
AWWA C301 (1999) Prestressed Concrete Pressure Pipe,

Steel-Cylinder Type
AWWA C302 (1995) Reinforced Concrete Pressure Pipe,

Non-Cylinder Type
AWWA C500 (2002; Addendum C500A - 1995) Metal Seated Gate

Valves for Water Supply Service
AWWA C502 (1994; Addendum C502A - 1995) Dry-Barrel Fire

Hydrants
AWWA C503 (1997) Wet-Barrel Fire Hydrants
Page 12
AWWA C504 (2000) Standard for Rubber-Seated Butterfly Valves
AWWA C510 (1997) Double Check Valve Backflow-Prevention

Assembly (Second Edition)
AWWA C511 (1997) Reduced Pressure Principle

Backflow-Prevention Assembly (First Edition)
AWWA C606 (1997) Grooved and Shouldered Joints
AWWA C651 (1999) Disinfecting Water Mains
AWWA C700 (2002) Cold Water Meters - Displacement Type,

Bronze Main Case
AWWA C701 (2002) Cold-Water Meters - Turbine Type for

Customer Service
AWWA C900 (1997) Polyvinyl Chloride (PVC) Pressure Pipe, 4

in. Through 12 in. for Water Distribution
AWWA C901 (2002) Polyethylene (PE) Pressure Pipe and Tubing,

1/2 in. Through 3 in., for Water Service
AWWA C905 (1997) Polyvinyl Chloride (PVC) Water Transmission

Pipe, Nominal Diameters 14 in Through 36 in
AWWA D100 (1996) Welded Steel Tanks for Water Storage
AMERICAN WELDING SOCIETY (AWS)
AWS A2.4 (1998) Standard Symbols for Welding, Brazing and

Nondestructive Examination
AWS A5.1 (2003) Specification for Carbon Steel Electrodes

for Shielded Metal Arc Welding
AWS A5.13 (1989; R 2000) Specification for Solid Surfacing

Welding Rods and Electrodes
AWS A5.3/A5.3M (1999) Specification for Aluminum and Aluminum

Alloy Electrodes for Shielded Metal Arc Welding
AWS A5.8 (1992; R 2003) Specification for Filler Metals for

Brazing and Braze Welding
AWS D1.1/D1.1M (2004) Structural Welding Code-Steel
AWS D1.2/D1.2M (2003) Structural Welding Code-Aluminum
AWS D1.3 (1998) Structural Welding Code - Sheet Steel
AWS D1.4 (1998) Structural Welding Code - Reinforcing Steel
AWS D14.1 (1997) Welding of Industrial and Mill Cranes and

Other Material Handling Equipment
Page 13
AWS D14.4 (1997) Classification and Application of Welded
Joints for Machinery and Equipment
AWS WHB-2.8 (1991; 8th Ed) Welding Handbook; Volume Two -

Welding Processes
AWS Z49.1 (1999) Safety in Welding and Cutting
AWS-03 (2001) Welding Handbook, Volumes 1 thru 5
AMERICAN WOOD PRESERVERS BUREAU (AWPB)
AWPB LP 2 (1988) Softwood Lumber, Timber and Plywood Pressure

Treated with Water-Borne Preservatives for
Aboveground Use
AMERICAN WOOD-PRESERVERS' ASSOCIATION (AWPA)
AWPA A3 (2000) Determining Penetration of Preservatives and

Fire Retardants
AWPA C1 (2003) All Timber Products - Preservative Treatment

by Pressure Processes
AWPA C2 (2000) Lumber, Timbers, Bridge Ties and Mine Ties -

Preservative Treatment by Pressure Processes
AWPA C20 (1988) Structural Lumber - Fire-Retardant Treatment

by Pressure Processes
AWPA C25 (2001) Sawn Crossarms - Preservative Treatment by

Pressure Processes
AWPA C27 (1999) Plywood - Fire-Retardant Treatment by

Pressure Processes
AWPA C28 (1990) Structural Glued Laminated Members and

Laminations Before Gluing, Pressure Treatment
AWPA C3 (1988) Piles - Preservative Treatment by Pressure

Processes
AWPA C4 (1995) Poles - Preservative Treatment by Pressure

Processes
AWPA P5 (2001) Standards for Waterborne Preservatives
AWPA P8 (2001) Oil-Borne Preservatives
APA - THE ENGINEERED WOOD ASSOCIATION (APA)
APA E30 (2003) Design/Construction Guide, Residential and

Commercial
ARCHITECTURAL WOODWORK INSTITUTE (AWI)
AWI QSGSQCP (2004) Architectural Woodwork Quality Standards
Page 14
AWI Qual Stds (2003) Architectural Casework - General
ASM INTERNATIONAL (ASM)
ASM 06542G (1999) Pure Metals Properties: A Scientific and

Technical Handbook
ASME INTERNATIONAL (ASME)
ASME A112.1.2 (1991; R 1998) Air Gaps in Plumbing Systems
ASME A112.18.1 (2003) Plumbing Fixture Fittings
ASME A112.19.2M (1998) Vitreous China Plumbing Fixtures Supplement

1-June 2000
ASME A112.21.1M (1991; R 1998) Floor Drains
ASME A112.6.1M (1997; R 2003) Supports for Off the Floor Plumbing
Fixtures for Public Use
ASME A17.1 (2002) Safety Code for Elevators and Escalators;

(Includes Interpretations)
ASME A17.2 (2001) Inspector's Manual for Elevators and

Escalators
ASME A39.1 (1995) Safety Requirements for Window Cleaning
ASME B1.20.1 (1983; R 1992) Pipe Threads, General Purpose (Inch)
ASME B1.20.1M (1983) Pipe Threads, Purpose (Metric)
ASME B1.20.7 (1991; R 1998) Hose Coupling Screw Threads (Inch)
ASME B1.21M (1997) Metric Screw Threads - MJ Profile
ASME B15.1 (2000) Safety Standard for Mechanical Power

Transmission Apparatus
ASME B16.1 (1998) Cast Iron Pipe Flanges and Flanged Fittings
Classes 25, 125, and 250
ASME B16.10 (2001) Face-to-Face and End-to-End Dimensions of

Ferrous Valves
ASME B16.11 (2002) Forged Steel Fittings, Socket-Welding and

Threaded
ASME B16.12 (1998) Cast-Iron Threaded Drainage Fittings
ASME B16.21 (1992) Nonmetallic Flanged Gaskets for Pipe Flanges
ASME B16.22 (2002) Wrought Copper and Copper Alloy Solder Joint
Pressure Fittings
Page 15
ASME B16.23 (2002) Cast Copper Alloy Solder Joint Drainage
Fittings-DWV
ASME B16.25 (1997) Buttwelding Ends
ASME B16.26 (1988) Cast Copper Alloy Fittings for Flared Copper
Tubes
ASME B16.3 (1998) Malleable Iron Threaded Fittings Classes 150

and 300
ASME B16.34 (1996) Valves - Flanged, Threaded and Welding End
ASME B16.39 (1998) Malleable Iron Threaded Pipe Unions Classes

150, 250, and 300
ASME B16.4 (1998) Gray Iron Threaded Fittings Classes 125 and
250
ASME B16.40 (2002) Manually Operated Thermoplastic Gas Shutoffs

and Valves in Gas Distribution Systems
ASME B16.5 (2003) Pipe Flanges and Flanged Fittings NPS 1/2
Through NPS 24
ASME B16.9 (2001) Factory-Made Wrought Steel Buttwelding

Fittings
ASME B17.1 (1967; R 1998) Keys and Keyseats
ASME B18.15 (1995) Forged Eyebolts
ASME B18.2.1 (1996) Square and Hex Bolts and Screws, Including
Hex Cap and Lag Screws (Inch Series)
ASME B18.2.1M (1996) Square and Hex Nuts (Metric Series)
ASME B18.2.2 (1987; R 1999) Square and Hex Nuts
ASME B18.2.3.7M (1979; R 2001) Metric Heavy Hex Screws
ASME B18.2.3.8M (1981; R 1999) Metric Hex Lag Screws
ASME B18.2.4.1M (2002) Metric Hex Nuts, Style 1
ASME B18.2.4.6M (1979; R 1998) Metric Heavy Hex Nuts
ASME B18.2.4M (1979; Rev 1989) Metric Hex Nuts
ASME B18.21.1 (2000) Lock Washers (Inch Series)
ASME B18.21.2M (2000) Lock Washers (Metric Series)
ASME B18.3.3M (1986; R 1993) Hexagon Socket Head Shoulder Screws

(Metric Series)
Page 16
ASME B18.6.1 (1981; R 1997) Wood Screws (Inch Series)
ASME B18.6.3 (1998) Machine Screws and Machine Screw Nuts
ASME B18.6.4 (1999) Thread Forming and Thread Cutting, Tapping

Screws and Metallic Drive Screws (Inch Series)
ASME B18.6.5M (2000) Metric Thread Forming and Thread Cutting

Tapping Screws
ASME B18.6.7M (2000) Metric Machine Screws
ASME B19.3 (1991) Safety Standard for Compressors for Process

Industries
ASME B29.11M (1994) Combination Chains, Attachments and Sprocket

Teeth
ASME B29.1M (1993; R 1999) Precision Power Transmission Roller

Chains, Attachments, and Sprockets
ASME B31.1 (2001) Power Piping
ASME B31.3 (2002) Process Piping
ASME B31.4 (2002) Pipeline Transportation Systems for Liquid

Hydrocarbons, and Other Liquids
ASME B31.5 (2001) Refrigeration Piping and Heat Transfer

Components
ASME B31.8 (2004) Gas Transmission and Distribution Piping

Systems
ASME B36.10M (2000) Welded and Seamless Wrought Steel Pipe
ASME B36.19M (1985; R 1994) Stainless Steel Pipe
ASME B40.100 (1998) Pressure Gauges and Gauge Attachments
ASME B46.1 (2002) Surface Texture (Surface Roughness,

Waviness, and Lay)
ASME BPVC (2001) Boiler and Pressure Vessel Code
ASME BPVC SEC II-C (2001) Boiler and Pressure Vessel Code; Section II,
Materials, Part C - Specifications for Welding
Rods, Electrodes and Filler Metals
ASME BPVC SEC IV (2001) Boiler and Pressure Vessel Code; Section IV,
Recommended Rules for the Care and Operation of
Heating Boilers
ASME BPVC SEC IX (2001) Boiler and Pressure Vessel Code; Section IX,
Welding and Brazing Qualifications
ASME BPVC SEC V (2001) Boiler and Pressure Vessel Code; Section V,
Page 17
Nondestructive Examination
ASME BPVC SEC VIII D1 (2001) Boiler and Pressure Vessel Code; Section
VIII, Pressure Vessels Division 1 - Basic Coverage
ASME BPVC SEC VIII D2 (2001) Boiler and Pressure Vessel Code; Section
VIII, Pressure Vessels Division 2 - Alternatives
Rules for Basic Coverage
ASME SI-01 (2001) Units, Boiler and Pressure Vessel Codes,

Section I - IX
ASPHALT INSTITUTE (AI)
AI ES-12 (1982; R 1997) Asphalt Surface Treatment -

Construction Techniques
ASPHALT ROOFING MANUFACTURER'S ASSOCIATION (ARMA)
ARMA 410BUR88 (2001) Manual of Roof Maintenance and Repair
ARMA 460LSR97 (2002) NRCA/ARMA Repair Manual for Low Slope

Membrane Roof Systems
ARMA PMBRG98 (1998) Quality Control Guideline for the

Application of Polymer Modified Bitumen Roofing.
ASSOCIATED AIR BALANCE COUNCIL (AABC)
AABC MN-1 (2002) National Standards for Total System Balance
ASSOCIATION FOR IRON AND STEEL TECHNOLOGY (AIST) (FORMERLY: IRON &
STEEL SOCIETY (ISS))
ISS PC95/211 (1998) Hot Rolled Structural Steel Shapes, H Piles

and Sheet Piling
ASSOCIATION OF EDISON ILLUMINATING COMPANIES (AEIC)
AEIC CS1 (1990; 11th Ed) Impregnated-Paper-Insulated,

Metallic Sheathed Cable, Solid Type
AEIC CS5 (1994; 10th Ed) Specifications for Cross-Linked

Polyethylene Insulated Shielded Power Cables Rated
5 Through 46KV
AEIC CS6 (1996; 6th Ed) Specifications for Ethylene

Propylene Rubber Insulated Shielded Power Cables
Rated 5 Through 69KV
ASTM INTERNATIONAL (ASTM)
ASTM A 1 (2000) Carbon Steel Tee Rails
ASTM A 1008/A 1008M (2004) Standard Specification for Steel, Sheet,

Cold-Rolled, Carbon, Structural, High-Strength
Low-Alloy and High-Strength Low-Alloy with Improved
Page 18
Formability
ASTM A 1011/A 1011M (2004a) Standard Specification for Steel, Sheet,

and Strip, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability
ASTM A 105/A 105M (2003) Standard Specification for Carbon Steel

Forgings for Piping Applications
ASTM A 106 (2002) Standard Specification for Seamless Carbon

Steel Pipe for High-Temperature Service
ASTM A 108 (2003) Steel, Carbon and Alloy, Cold-Finished
ASTM A 116 (2000) Standard Specification for Metallic-Coated,

Steel Woven Wire Fence Fabric
ASTM A 121 (1999) Standard Specification for Zinc-Coated

(Galvanized) Steel Barbed Wire
ASTM A 123/A 123M (2002) Standard Specification for Zinc (Hot-Dip

Galvanized) Coatings on Iron and Steel Products
ASTM A 126/A 126M (1995) Standard Specification for Gray Iron

Castings for Valves, Flanges, and Pipe Fittings
ASTM A 135 (2001) Electric-Resistance-Welded Steel Pipe
ASTM A 139 (2000) Standard Specification for Electric-Fusion

(ARC)-Welded Steel Pipe (NPS 4 and over)
ASTM A 148/A 148M (2003) Steel Castings, High Strength, for

Structural Purposes
ASTM A 153/A 153M (2004) Standard Specification for Zinc Coating

(Hot-Dip) on Iron and Steel Hardware
ASTM A 167 (2004) Standard Specification for Stainless and

Heat-Resisting Chromium-Nickel Steel Plate, Sheet,
and Strip
ASTM A 176 (1999) Stainless and Heat-Resisting Chromium Steel

Plate, Sheet, and Strip
ASTM A 181/A 181M (2001) Standard Specification for Forgings, Carbon

Steel, for General-Purpose Piping
ASTM A 182/A 182M (2002) Standard Specification for Forged or Rolled

Alloy-Steel Pipe Flanges, Forged Fittings, and
Valves and Parts for High-Temperature Service
ASTM A 183 (2003) Standard Specification for Carbon Steel

Track Bolts and Nuts
ASTM A 184/A 184M (2001) Fabricated Deformed Steel Bar Mats for
Concrete Reinforcement
Page 19
ASTM A 185 (2002) Standard Specification for Steel Welded Wire
Reinforcement, Plain, for Concrete
ASTM A 193/A 193M (2004) Standard Specification for Alloy-Steel and

Stainless Steel Bolting Materials for
High-Temperature Service
ASTM A 194/A 194M (2003) Standard Specification for Carbon and Alloy
Steel Nuts for Bolts for High-Pressure and
High-Temperature Service
ASTM A 197/A 197M (2000) Standard Specification for Cupola Malleable

Iron
ASTM A 216/A 216M (1993; R 2003) Standard Specification for Steel

Castings, Carbon, Suitable for Fusion Welding, for
High Temperature Service
ASTM A 234/A 234M (2003) Standard Specification for Piping Fittings

of Wrought Carbon Steel and Alloy Steel for
Moderate and High Temperatures
ASTM A 240/A 240M (2004) Standard Specification for Heat-Resisting

Chromium and Chromium-Nickel Stainless Steel Plate,
Sheet, and Strip for Pressure Vessels
ASTM A 242/A 242M (2003a) High-Strength Low-Alloy Structural Steel
ASTM A 269 (2002a) Seamless and Welded Austenitic Stainless

Steel Tubing for General Services
ASTM A 27/A 27M (2003) Standard Specification for Steel Castings,

Carbon, for General Application
ASTM A 276 (2004) Standard Specification for Stainless Steel

Bars and Shapes
ASTM A 278 (1993) Standard Specification for Gray Iron

Castings for Pressure-Containing Parts for
Temperatures Up to 650 Degrees F
ASTM A 278M (2001) Standard Specification for Gray Iron

Castings for Pressure-Containing Parts for
Temperatures Up to 345 Degrees C (Metric)
ASTM A 283/A 283M (2003) Standard Specification for Low and

Intermediate Tensile Strength Carbon Steel Plates
ASTM A 29/A 29M (2003) Standard Specification for Steel Bars,

Carbon and Alloy, Hot-Wrought and Cold Finished,
General Requirements

Bolts and Studs, 60,000 psi Tensile Strength
ASTM A 312/A 312M (2003) Standard Specification for Seamless and

Welded Austenitic Stainless Steel Pipes
Page 20
ASTM A 322 (1991; Rev 2001) Standard specification Steel Bars,
Alloy, Standard Grades
ASTM A 325 (2004b) Standard Specification for Structural

Bolts, Steel, Heat Treated, 120/105 ksi Minimum
Tensile Strength
ASTM A 325M (2004b) Standard Specification for Structural Steel

Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile
Strength (Metric)
ASTM A 336/A 336M (2003a) Standard Specification for Steel Forgings,

Alloy, for Pressure and High-Temperature Parts
ASTM A 345 (1998) Standard Specification for Flat-Rolled

Electrical Steels for Magnetic Applications
ASTM A 351/A 351M (2003) Standard Specification for Steel Castings,

Austenitic, Austenitic-Ferritic (Duplex), for
Pressure Containing Parts
ASTM A 36/A 36M (2004) Standard Specification for Carbon Structural

Steel
ASTM A 366/A 366M (1997e1) Standard Specification for Steel, Sheet,

Carbon, Cold-Rolled, Commercial Quality
ASTM A 368 (1995a; R 2000) Standard Specification for

Stainless Steel Wire Strand
ASTM A 370 (2003a) Standard Test Methods and Definitions for

Mechanical Testing of Steel Products
ASTM A 385 (2003) Standard Practice for Providing High-Quality

Zinc Coatings (Hot-Dip)
ASTM A 390 (1995; R 2001) Standard Specification for

Zinc-Coated (Galvanized) Steel Poultry Fence Fabric
(Hexagonal and Straight Line)
ASTM A 395 (1988) Standard Specification for Ferritic Ductile

Iron Pressure-Retaining Castings for Use at
Elevated Temperatures
ASTM A 395M (1999e1) Standard Specification for Ferritic

Ductile Iron Pressure-Retaining Castings for Use at
Elevated Temperatures (Metric)
ASTM A 403/A 403M (2003a) Standard Specification for Wrought

Austenitic Stainless Steel Piping Fittings
ASTM A 416/A 416M (2002) Standard Specification for Steel Strand,

Uncoated Seven-Wire for Prestressed Concrete
ASTM A 420/A 420M (2003) Standard Specification for Piping Fittings

of Wrought Carbon Steel and Alloy Steel for
Low-Temperature Service
Page 21
ASTM A 421 (2002) Standard Specification for Uncoated
Stress-Relieved Wire for Prestressed Concrete
ASTM A 423/A 423M (1995; R 2000) Seamless and Electric-Welded

Low-Alloy Steel Tubes
ASTM A 424 (2000) Standard Specification for Steel Sheet for

Porcelain Enameling
ASTM A 436 (1984; R 2001) Standard Specification for

Austenitic Gray Iron Castings
ASTM A 446/A 446M (2003) Standard Specification for Steel Sheet,

Zinc-Coated (Galvanized) by the Hot-Dip Process,
Structural (Physical) Quality
ASTM A 449 (2004) Standard Specification for Quenched and

Tempered Steel Bolts and Studs
ASTM A 463/A 463M (2002a) Standard Specification for Steel Sheet,

Cold-Rolled, Aluminum-Coated, Type 1 and Type 2
ASTM A 467/A 467M (2001) Standard Specification for Machine Coil and
Chain
ASTM A 47/A 47M (1999) Standard Specification for Ferritic

Malleable Iron Castings
ASTM A 48/A 48M (2003) Standard Specification for Gray Iron Castings
ASTM A 480/A 480M (2004) Standard Specification for General

Requirements for Flat-Rolled Stainless and
Heat-Resisting Steel Plate, Sheet, and Strip

Eyebolts
ASTM A 490 (2004) Standard Specification for Heat-Treated

Steel Structural Bolts, 150 psi Minimum Tensile
Strength
ASTM A 490M (2004) Standard Specification for High-Strength

Steel Structural Bolts, Classes 10.9 and 10.9.3,
for Structural Steel Joints (Metric)
ASTM A 492 (1995; R 2000) Standard Specification for Stainless

and Heat-Resisting Steel Rope Wire
ASTM A 497/A 497M (2002) Welded Deformed Steel Wire Fabric for
Concrete Reinforcement
ASTM A 500 (2003a) Standard Specification for Cold-Formed

Welded and Seamless Carbon Steel Structural Tubing
in Rounds and Shapes
ASTM A 501 (2001) Standard Specification for Hot-Formed Welded

and Seamless Carbon-Steel Structural Tubing
Page 22
ASTM A 502 (2003) Steel Structural Rivets
ASTM A 510 (2003) Wire Rods and Coarse Round Wire, Carbon Steel
ASTM A 510M (2003) Wire Rods and Coarse Round Wire, Carbon
Steel (Metric)
ASTM A 512 (1996; R 2001) Cold-Drawn Buttweld Carbon Steel

Mechanical Tubing
ASTM A 513 (2000) Electric-Resistance-Welded Carbon an Alloy

Steel Mechanical Tubing
ASTM A 514/A 514M (2000a) High-Yield-Strength, Quenched and Tempered

Alloy Steel Plate, Suitable for Welding
ASTM A 518/A 518M (1999; R 2003) Corrosion-Resistant High-Silicon

Iron Castings
ASTM A 525 (1993) Standard Specification for General

Requirements for Steel Sheet, Zinc-Coated
(Galvanized) by the Hot-Dip Process
ASTM A 525M (1991; Rev A) Standard Specification for General

Requirements for Steel Sheet, Zinc-Coated
(Galvanized) by the Hot-Dip Process (Metric)

Commercial Quality

Lock-Forming Quality
ASTM A 529/A 529M (2003) Standard Specification for Structural Steel

with 42 ksi (290 MPa) Minimum Yield Point - (1/2
inch (13 mm) Maximum Thickness)
ASTM A 53/A 53M (2002) Standard Specification for Pipe, Steel,

Black and Hot-Dipped, Zinc-Coated Welded and
Seamless
ASTM A 536 (1994) Standard Specification for Ductile Iron

Castings
ASTM A 539 (1999) Standard Specification for Electric

Resistance Welded Coiled Steel Tubing for Gas and
Fuel Oil Lines
ASTM A 563 (2004) Standard Specification for Carbon and Alloy

Steel Nuts
ASTM A 563M (2003) Standard Specification for Carbon and Alloy

Steel Nuts (Metric)
ASTM A 568/A 568M (2004) Standard Specifications for Steel, Sheet,
Page 23
Carbon, and High-Strength, Low-Alloy, Hot-Rolled
and Cold-Rolled, General Requirements for
ASTM A 570/A 570M (1998) Standard Specification for Steel, Sheet and
Strip, Carbon, Hot-Rolled, Structural Quality
ASTM A 572/A 572M (2002ae1) Standard Specification for High-Strength

Low-Alloy Columbium-Vanadium Steels of Structural
Quality
ASTM A 575 (2002) Standard Specification for Steel Bars,

Carbon, Merchant Quality, M-Grades
ASTM A 584 (1997) Standard Specification for Aluminum Coated

Steel Woven Wire Fence Fabric
ASTM A 588/A 588M (2003) High-Strength Low-Alloy Structural Steel

with 50 ksi (345 MPa) Minimum Yield Point to 4 inch
(100 mm) Thick
ASTM A 589 (1996; R 2001) Standard Specification for Seamless

and Welded Carbon Steel Water-Well Pipe

Electrolytic Zinc-Coated, for Light Coating
(Weight) Mass Applications
ASTM A 6/A 6M (2004a) Standard Specification for General

Requirements for Rolled Structural Steel Bars,
Plates, Shapes, and Sheet Piling
ASTM A 606 (2004) Standard Specification for Steel Sheet and

Strip, High-Strength, Low-Alloy, Hot-Rolled and
Cold-Rolled, with Improved Atmospheric Corrosion
Resistance
ASTM A 615/A 615M (2004) Standard Specification for Deformed and

Plain Billet-Steel Bars for Concrete Reinforcement
ASTM A 616/A 616M (1995; Rev A) Rail-Steel Deformed and Plain Bars
for Concrete Reinforcement
ASTM A 617/A 617M (1995; Rev A) Axle-Steel Deformed and Plain Bars
for Concrete Reinforcement
ASTM A 618 (2001) Hot-Formed Welded and Seamless High-Strength

Low-Alloy Structural Tubing
ASTM A 641/A 641M (2003) Standard Specification for Zinc-Coated

(Galvanized) Carbon Steel Wire
ASTM A 653/A 653 M (2004a) Standard Specification for General

Requirements for Steel Sheet, Zinc-Coated or
Zinc-Iron Alloy Coated (Galvanized) by the Hot-Dip
Process
Page 24
Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated
(Galvannealed) by the Hot-Dip Process
ASTM A 666 (2003) Standard Specification for Annealed or

Cold-Worked Austenitic Stainless Steel Sheet,
Strip, Plate and Flat Bar
ASTM A 668 (2003) Steel Forgings, Carbon and Alloy, for

General Industrial Use
ASTM A 675/A 675M (2003) Standard Specification for Steel Bars,

Carbon, Hot-Wrought, Special Quality, Mechanical
Properties
ASTM A 694/A 694M (2003) Standard Specification for Forgings, Carbon

and Alloy Steel, for Pipe Flanges, Fittings, Valves
and Parts for High Pressure Transmission Service
ASTM A 702 (1989; R 2000) Standard Specification for Steel

Fence Posts and Assemblies, Hot Wrought
ASTM A 706/A 706M (2004) Low-Alloy Steel Deformed Bars for Concrete
Reinforcement
ASTM A 74 (2004) Standard Specification for Cast Iron Soil

Pipe and Fittings
ASTM A 746 (2003) Standard Specification for Ductile Iron

Gravity Sewer Pipe
ASTM A 760/A 760M (2001) Standard Specification for Corrugated Steel

Pipe, Metallic-Coated for Sewers and Drains
ASTM A 762/A 762M (2000) Standard Specification for Corrugated Steel

Pipe, Polymer Precoated for Sewers and Drains
ASTM A 767/A 767M (2000b) Zinc-Coated (Galvanized) Bars for Concrete

Reinforcement
ASTM A 775/A 775M (2001) Epoxy-Coated Reinforcing Steel Bars
ASTM A 780 (2001) Standard Practice for Repair of Damaged and

Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM A 786/A 786M (200b) Hot-Rolled Carbon, Low-Alloy, High Strength

Low-Alloy, and Alloy Steel Floor Plates
ASTM A 798/A 798M (2001) Standard Practice for Installing

Factory-Made Corrugated Steel Pipe for Sewers and
Other Applications
ASTM A 82 (2002) Standard Specification for Steel Wire,

Plain, for Concrete Reinforcement
ASTM A 849 (2000) Standard Specification for Post-Applied

Coatings, Pavings, and Linings for Corrugated Steel
Sewer and Drainage Pipe
Page 25
ASTM A 90/A 90M (2001) Standard Test Method for Weight (Mass) of
Coating on Iron or Steel Articles with Zinc or Zinc
Alloy
ASTM A 924/A 924M (1999) Standard Specification for General

Requirements for Steel Sheet, Metallic-Coated by
the Hot-Dip Process
ASTM B 1 (2001) Standard Specification for Hard-Drawn Copper

Wire
ASTM B 117 (2003) Operating Salt Spray Apparatus (Fog)
ASTM B 136 (2003) Standard Method for Measurement of Stain

Resistance of Anodic Coatings on Aluminum
ASTM B 137 (1995; R 2000) Standard Test Method for Measurement

of Mass of Coating on Anodically Coated Aluminum
ASTM B 148 (1997; R 2003) Standard Specification for

Aluminum-Bronze Sand Castings
ASTM B 164 (2003) Standard Specification for Nickel-Copper

Alloy Rod, Bar, and Wire
ASTM B 173 (2001a) Standard Specification for

Rope-Lay-Stranded Copper Conductors Having
Concentric-Stranded Members, for Electrical
Conductors
ASTM B 209/B 209M (2004) Standard Specification for Aluminum and

Aluminum-Alloy Sheet and Plate
ASTM B 211 (2003) Standard Specification for Aluminum and

Aluminum-Alloy Bar, Rod, and Wire
ASTM B 211M (2003) Standard Specification for Aluminum and

Aluminum-Alloy Bar, Rod, and Wire (Metric)
ASTM B 221/B 221M (2004a) Standard Specification for Aluminum and

Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles,
and Tubes
ASTM B 224 (1998) Standard Classification of Coppers
ASTM B 232/B 232M (2001e1) Standard Specification for

Concentric-Lay-Stranded Aluminum Conductors, Coated
Steel-Reinforced (ACSR)
ASTM B 244 (1997; R 2002) Standard Method for Measurement of

Thickness of Anodic Coatings on Aluminum and of
Other Nonconductive Coatings on Nonmagnetic Basis
Metals with Eddy-Current Instruments
ASTM B 247 (2002a) Standard Specification for Aluminum and

Aluminum-Alloy Die and Hand Forgings and Rolled
Ring Forgings
Page 26
ASTM B 247M (2002a) Standard Specification for Aluminum and
Aluminum-Alloy Die and Hand Forgings and Rolled
Ring Forgings (Metric)
ASTM B 258 (2002) Standard Specifications for Standard Nominal

Diameters and Cross-Sectional Areas of AWG Sizes of
Solid Round Wires Used as Electrical Conductors
ASTM B 26/B 26M (2003) Standard Specification for Aluminum-Alloy

Sand Castings
ASTM B 280 (2003) Standard Specification for Seamless Copper

Tube for Air Conditioning and Refrigeration Field
Service
ASTM B 3 (2001) Standard Specification for Soft or Annealed

Copper Wire
ASTM B 306 (2002) Copper Drainage Tube (DWV)
ASTM B 316/B 316M (2002) Standard Specification for Aluminum and

Aluminum-Alloy Rivet and Cold Heading Wire and Rods
ASTM B 32 (2003) Standard Specification for Solder Metal
ASTM B 33 (2000) Standard Specification for Tinned Soft or

Annealed Copper Wire for Electrical Purposes
ASTM B 36/B 36M (2001) Brass Plate, Sheet, Strip, and Rolled Bar
ASTM B 37 (2003) Standard Specification for Aluminum for Use

in Iron and Steel Manufacturer
ASTM B 370 (2003) Standard Specifications for Copper Sheet and

Strip for Building Construction
ASTM B 398/B 398M (2002) Specification for Aluminum-Alloy 6201-T81

Wire for Electrical Purposes
ASTM B 399/B 399M (1999) Specification for Concentric-Lay-Stranded

Aluminum-Alloy 6201-T81 Conductors
ASTM B 418 (2001) Cast and Wrought Galvanic Zinc Anodes
ASTM B 429 (2002) Standard Specification for Aluminum-Alloy

Extruded Structural Pipe and Tube
ASTM B 43 (1998e1) Standard Specification for Seamless Red

Brass Pipe, Standard Sizes
ASTM B 456 (2003) Standard Specification for Electrodeposited

Coatings of Copper Plus Nickel Plus Chromium and
Nickel Plus Chromium
ASTM B 479 (2000) Standard Specification for Annealed Aluminum

and Aluminum-Alloy Foil for Flexible Barrier
Applications, Food Contact and Other Applications
Page 27
ASTM B 48 (2000) Standard Specification for Soft Rectangular
and Square Bare Copper Wire for Electrical
Conductors
ASTM B 5 (2000) Standard Specification for High Conductivity

Tough-Pitch Copper Refinery Shapes
ASTM B 584 (2000) Standard Specification for Copper Alloy Sand

Castings for General Applications
ASTM B 61 (2002) Standard Specification for Steam or Valve

Bronze Castings
ASTM B 62 (2002) Standard Specification for Composition

Bronze or Ounce Metal Castings
ASTM B 630 (1988; R 2001) Standard Practice for Preparation of

Chromium for Electroplating with Chromium

Coatings of Zinc on Iron and Steel
ASTM B 695 (2000) Coatings of Zinc Mechanically Deposited on

Iron and Steel
ASTM B 745/B 745M (1997) Standard Specification for Corrugated

Aluminum Pipe for Sewers and Drains
ASTM B 749 (2003) Standard Specification for Lead and Lead

Alloy Strip, Sheet and Plate Products

Coatings of Cadmium
ASTM B 8 (1999) Standard Specification for

Concentric-Lay-Stranded Copper Conductors, Hard,
Medium-Hard, or Soft
ASTM B 85 (2003) Standard Specification for Aluminum-Alloy

Die Casting
ASTM B 86 (2004e1) Standard Specification for Zinc and

Zinc-Aluminum Alloy Foundry and Die Castings
ASTM B 88 (2003) Standard Specification for Seamless Copper

Water Tube
ASTM B 88M (2003) Standard Specification for Seamless Copper

Water Tube (Metric)
ASTM C 1019 (2003) Standard Test Method for Sampling and

Testing Grout
ASTM C 1036 (2001) Standard Specification for Flat Glass
ASTM C 1050 (1991) Rigid Cellular Polystyrene- Cellulosic Fiber

Composite Roof Insulation
Page 28
ASTM C 1064/C 1064M (2003) Standard Test Method for Temperature of
Freshly Mixed Portland Cement Concrete
ASTM C 1071 (2000) Standard Specification for Fibrous Glass

Duct Lining Insulation (Thermal and Sound Absorbing
Material)
ASTM C 1085 (1991) Butyl Rubber-Based Solvent-Release Sealants
ASTM C 109/C 109M (2002) Standard Test Method for Compressive

Strength of Hydraulic Cement Mortars (Using 2-in.
or (50-mm) Cube Specimens)
ASTM C 1107 (2002) Standard Specification for Packaged Dry,

Hydraulic-Cement Grout (Non-Shrink)
ASTM C 1136 (2000a) Standard Specification for Flexible, Low

Permeance Vapor Retarders for Thermal Insulation
ASTM C 1139 (1990; R 2002) Standard Specification for Fibrous

Glass Thermal Insulation and Sound Absorbing
Blanket and Board for Military Application
ASTM C 114 (2004) Standard Test Method for Chemical Analysis

of Hydraulic Cement
ASTM C 115 (1996a; R 2003) Standard Test Method for Fineness

of Portland Cement by the Turbidimeter
ASTM C 1153 (1997; R 2003e1) Standard Practice for Location of

Wet Insulation in Roofing Systems Using Infrared
Imaging
ASTM C 117 (2003) Standard Test Method for Materials Finer

than 75-micrometer (No. 200) Sieve in Mineral
Aggregates by Washing
ASTM C 1177/C 1177M (2004) Glass Mat Gypsum Substrate for Use as
Sheathing
ASTM C 12 (2003) Standard Practice for Installing Vitrified

Clay Pipe Lines
ASTM C 123 (2003) Standard Test Method for Lightweight

Particles in Aggregate
ASTM C 125 (2003) Standard Terminology Relating to Concrete

and Concrete Aggregates
ASTM C 126 (1999) Standard Specification for Ceramic Glazed

Structural Clay Facing Tile, Facing Brick, and
Solid Masonry Units
ASTM C 127 (2001) Standard Test Method for Density, Relative

Density (Specific Gravity), and Absorption of
Coarse Aggregate
Page 29
ASTM C 128 (2001e1) Standard Test Method for Density, Relative
Density (Specific Gravity), and Absorption of Fine
Aggregate
ASTM C 1289 (2003) Standard Specification for Faced Rigid

Cellular Polyisocyanurate Thermal Insulation Board
ASTM C 131 (2003) Standard Test Method for Resistance to

Degradation of Small-Size Coarse Aggregate by
Abrasion and Impact in the Los Angeles Machine
ASTM C 136 (2001) Standard Test Method for Sieve Analysis of

Fine and Coarse Aggregates
ASTM C 138/C 138M (2001a) Standard Test Method for Density ("Unit
Weight"), Yield, and Air Content (Gravimetric) of
Concrete
ASTM C 139 (2003) Standard Specification for Concrete Masonry

Units for Construction of Catch Basins and Manholes
ASTM C 14 (2003) Standard Specification for Concrete Sewer,

Storm Drain, and Culvert Pipe
ASTM C 140 (2003) Standard Test Method for Sampling and

Testing Concrete Masonry Units and Related Units
ASTM C 141 (1997) Standard Specification for Hydraulic

Hydrated Lime for Structural Purposes
ASTM C 142 (1997) Standard Test Method for Clay Lumps and
Friable Particles in Aggregates
ASTM C 143/C 143M (2003) Standard Test Method for Slump of

Hydraulic-Cement Concrete
ASTM C 144 (2003) Standard Specification for Aggregate for

Masonry Mortar
ASTM C 14M (2003) Standard Specification for Concrete Sewer,

Storm Drain, and Culvert Pipe (Metric)
ASTM C 150 (2004a) Standard Specification for Portland Cement
ASTM C 151 (2000) Standard Test Method for Autoclave Expansion

of Portland Cement
ASTM C 155 (1997; R 2002) Standard Classification of

Insulating Fire Brick
ASTM C 156 (2003) Water Retention by Concrete Curing Materials
ASTM C 157/C 157M (2003) Standard Test Method for Length Change of
Hardened Hydraulic-Cement Mortar, and Concrete
ASTM C 171 (2003) Standard Specification for Sheet Materials

for Curing Concrete
Page 30
ASTM C 172 (1999) Standard Practice for Sampling Freshly Mixed
Concrete
ASTM C 173/C 173M (2001e1) Standard Test Method for Air Content of
Freshly Mixed Concrete by the Volumetric Method
ASTM C 183 (2002) Standard Practice for Sampling and the

Amount of Testing of Hydraulic Cement
ASTM C 185 (2002) Standard Test Method for Air Content of

Hydraulic Cement Mortar
ASTM C 186 (1998) Standard Test Method for Heat of Hydration

of Hydraulic Cement
ASTM C 190 (1985) Standard Test Method for Tensile Strength of

Hydraulic Cement Mortars
ASTM C 191 (2004) Standard Test Method for Time of Setting

Hydraulic Cement by Vicat Needle
ASTM C 192/C 192M (2002) Standard Practice for Making and Curing
Concrete Test Specimens in the Laboratory
ASTM C 195 (2000) Standard Specification for Mineral Fiber

Thermal Insulating Cement
ASTM C 204 (2000) Standard Test Method for Fineness of

Hydraulic Cement by Air Permeability Apparatus
ASTM C 206 (2003) Standard Specification for Finishing

Hydrated Lime
ASTM C 207 (2004) Standard Specification for Hydrated Lime for

Masonry Purposes
ASTM C 208 (1995; R 2001) Standard Specification for

Cellulosic Fiber Insulating Board
ASTM C 216 (2004) Standard Specification for Facing Brick

(Solid Masonry Units Made from Clay or Shale)
ASTM C 220 (1991; R 1999) Flat Asbestos-Cement Sheets
ASTM C 231 (2003) Standard Test Method for Air Content of

Freshly Mixed Concrete by the Pressure Method
ASTM C 232 (1999) Standard Test Methods for Bleeding of

Concrete
ASTM C 233 (2001) Standard Test Method for Air-Entraining

Admixtures for Concrete
ASTM C 236 (1989; R 1993) Steady-State Thermal Performance of

Building Assemblies by Means of a Guarded Hot Box
ASTM C 241 (1990; R 1997e1) Standard Specification for
Page 31
Abrasion Resistance of Stone Subjected to Foot
Traffic
ASTM C 25 (1999) Standard Test Methods for Chemical Analysis

of Limestone, Quicklime, and Hydrated Lime
ASTM C 260 (2001) Standard Specification for Air-Entraining

ASTM C 266 (2003) Standard Test Method for Time of Setting of

Hydraulic-Cement Paste by Gillmore Needles
ASTM C 270 (2003b) Standard Specification for Mortar for Unit

Masonry
ASTM C 28 (2000e1) Standard Specification for Gypsum Plaster
ASTM C 282 (1999) Acid Resistance of Porcelain Enamels (Citric

Acid Spot Test)
ASTM C 286 (1999) Standard Definitions of Terms Relative to

Porcelain Enamel and Ceramic Metal Systems
ASTM C 289 (2003) Standard Test Method for Potential

Reactivity of Aggregates (Chemical Method)
ASTM C 29/C 29M (1997) Standard Test Method for Bulk Density ("Unit
Weight") and Voids in Aggregate
ASTM C 309 (2003) Standard Specification for Liquid

Membrane-Forming Compounds for Curing Concrete
ASTM C 31 (2000e1) Standard Practice for Making and Curing

Concrete Test Specimens in the Field
ASTM C 32 (1993; R 1999e1) Standard Specification for Sewer

and Manhole Brick (Made from Clay or Shale)
ASTM C 33 (2003) Standard Specification for Concrete

Aggregates
ASTM C 330 (2004) Standard Specification for Lightweight

Aggregates for Structural Concrete

Aggregates for Concrete Masonry Units

Aggregates for Insulating Concrete
ASTM C 338 (1993; R 2003) Softening Point of Glass

Structural Clay Load-Bearing Wall Tile
ASTM C 35 (2001) Inorganic Aggregates for Use in Gypsum

Plaster
Page 32
ASTM C 36 (1995) Gypsum Wallboard
ASTM C 361 (2003a) Standard Specification for Reinforced

Concrete Low-Head Pressure Pipe
ASTM C 361M (2003a) Standard Specification for Reinforced

Concrete Low-Head Pressure Pipe (Metric)
ASTM C 37 (2001) Standard Specification for Gypsum Lath
ASTM C 387 (2000e1) Standard Specification for Packaged, Dry,

Combined Materials for Mortar and Concrete
ASTM C 39/C 39M (2003) Standard Test Method for Compressive

Strength of Cylindrical Concrete Specimens
ASTM C 40 (1999) Standard Test Method for Organic Impurities

in Fine Aggregates for Concrete
ASTM C 403/C 403M (1999) Standard Test Method for Time of Setting of
Concrete Mixtures by Penetration Resistance
ASTM C 404 (2003) Standard Specification for Aggregates for

Masonry Grout
ASTM C 412 (2003) Concrete Drain Tile
ASTM C 412M (2003) Concrete Drain Tile (Metric)
ASTM C 42/C 42M (2003) Standard Test Method for Obtaining and
Testing Drilled Cores and Sawed Beams of Concrete
ASTM C 423 (2002a) Standard Test Method for Sound Absorption

and Sound Absorption Coefficients by the
Reverberation Room Method
ASTM C 424 (1993; R 1999) Standard Test Method for Crazing

Resistance of Fired Glazed Whitewares by Autoclave
Treatment
ASTM C 425 (2002) Standard Specification for Compression

Joints for Vitrified Clay Pipe and Fittings
ASTM C 426 (1999) Standard Test Method for Linear Drying

Shrinkage of Concrete Masonry Units
ASTM C 442/C 442M (2004) Gypsum Backing Board, Gypsum Coreboard, and
Gypsum Shaftliner Board
ASTM C 443 (2003) Standard Specification for Joints for

Circular Concrete Sewer and Culvert Pipe, Using
Rubber Gaskets
ASTM C 443M (2003) Standard Specification for Joints for

Circular Concrete Sewer and Culvert Pipe, Using
Rubber Gaskets (Metric)
Page 33
ASTM C 449/C 449M (2000) Standard Specification for Mineral Fiber
Hydraulic-Setting Thermal Insulating and Finishing
Cement
ASTM C 450 (2002) Standard Practice for Prefabrication and

Field Fabrication of Thermal Insulating Fitting
Covers for NPS Piping, Vessel Lagging, and Dished
Head Segments
ASTM C 451 (2004) Standard Test Method for Early Stiffening of

Hydraulic Cement (Paste Method)
ASTM C 473 (2003) Physical Testing of Gypsum Board Products

and Gypsum Lath
ASTM C 475/C 475M (2002) Joint Compound and Joint Tape for Finishing
Gypsum Board
ASTM C 476 (2002) Standard Specification for Grout for Masonry
ASTM C 478 (2003a) Standard Specification for Precast

Reinforced Concrete Manhole Sections
ASTM C 478M (2003a) Standard Specification for Precast

Reinforced Concrete Manhole Sections (Metric)
ASTM C 481 (1999) Laboratory Aging of Sandwich Constructions
ASTM C 482 (2002) Standard Test Method for Bond Strength of

Ceramic Tile to Portland Cement
ASTM C 485 (1983; R 2003) Standard Test Method for Measuring

Warpage of Ceramic Tile
ASTM C 494/C 494M (2004) Standard Specification for Chemical

ASTM C 499 (1978; R 2003) Standard Test Method for Facial

Dimensions and Thickness of Flat, Rectangular
Ceramic Wall and Floor Tile
ASTM C 506 (2002) Standard Specification for Reinforced

Concrete Arch Culvert, Storm Drain, and Sewer Pipe
ASTM C 506M (2002) Standard Specification for Reinforced

Concrete Arch Culvert, Storm Drain, and Sewer Pipe
(Metric)

Concrete Elliptical Culvert, Storm Drain, and Sewer
Pipe

Concrete Elliptical Culvert, Storm Drain, and Sewer
Pipe (Metric)
ASTM C 509 (2000) Standard Specification for Elastomeric
Page 34
Cellular Preformed Gasket and Sealing Material
ASTM C 513 (1989; R 1995) Standard Test Method for Obtaining

and Testing Specimens of Hardened Lightweight
Insulating Concrete for Compressive Strength
ASTM C 514 (2001) Standard Specification for Nails for the

Application of Gypsum Board
ASTM C 515 (1995; R 2001) Chemical-Resistant Ceramic Tower

Packings
ASTM C 516 (2002) Standard Specification for Vermiculite Loose

Fill Thermal Insulation
ASTM C 518 (2002e1) Standard Test Method for Steady-State Heat

Flux Measurements and Thermal Transmission
Properties by Means of the Heat Flow Meter Apparatus
ASTM C 533 (2003) Standard Specification for Calcium Silicate

Block and Pipe Thermal Insulation
ASTM C 534 (2003) Standard Specification for Preformed

Flexible Elastomeric Cellular Thermal Insulation in
Sheet and Tubular Form
ASTM C 535 (2003e1) Standard Test Method for Resistance to

Degradation of Large-Size Coarse Aggregate by
Abrasion and Impact in the Los Angeles Machine

Preformed Pipe Insulation
ASTM C 549 (2002) Standard Specification for Perlite Loose

Fill Insulation
ASTM C 55 (2003) Standard Specification for Concrete Brick
ASTM C 552 (2003) Standard Specification for Cellular Glass

Thermal Insulation

Blanket Thermal Insulation for Commercial and
Industrial Applications
ASTM C 557 (2003) Adhesives for Fastening Gypsum Wallboard to

Wood Framing

Structural Clay Non-Load-Bearing Tile
ASTM C 564 (2003a) Standard Specification for Rubber Gaskets

for Cast Iron Soil Pipe and Fittings
ASTM C 566 (1997; R 2004) Standard Test Method for Total

Evaporable Moisture Content of Aggregate by Drying
Page 35
ASTM C 568 (2003) Standard Specification for Limestone
Dimension Stone
ASTM C 570 (1995) Oil- and Resin-Base Caulking Compound for

Building Construction
ASTM C 578 (2004a) Standard Specification for Rigid, Cellular

Polystyrene Thermal Insulation
ASTM C 581-03 (2003) Standard Practice for Determining Chemical

Resistance of Thermosetting Resins Used in Glass
Fiber Reinforced Structures, Intended for Liquid
Service
ASTM C 591 (2001) Standard Specification for Unfaced Preformed

Rigid Cellular Polyisocyanurate Thermal Insulation

Blanket Insulation and Blanket-Type Pipe Insulation
(Metal-Mesh Covered) (Industrial Type)
ASTM C 595 (2003) Standard Specification for Blended Hydraulic

Cements
ASTM C 602 (1995; R 2001) Agricultural Liming Materials
ASTM C 61/C 61M (2000) Gypsum Keene's Cement
ASTM C 610 (1999) Standard Specification for Molded Expanded

Perlite Block and Pipe Thermal Insulation
ASTM C 612 (2000a) Standard Specification for Mineral Fiber

Block and Board Thermal Insulation
ASTM C 618 (2003) Standard Specification for Coal Fly Ash and
Raw or Calcined Natural Pozzolan for Use as a
Mineral Admixture in Concrete
ASTM C 62 (2001) Standard Specification for Building Brick

(Solid Masonry Units Made From Clay or Shale)
ASTM C 630/C 630M (2003) Water-Resistant Gypsum Backing Board
ASTM C 635 (2000) Standard Specification for the Manufacture,

Performance and Testing of Metal Suspension Systems
for Acoustical Tile and Lay-In Panel Ceilings
ASTM C 636 (2003) Standard Practice for Installation of Metal

Ceiling Suspension Systems for Acoustical Tile and
Lay-In Panels
ASTM C 641 (1998e1) Standard Test Method for Staining

Materials in Lightweight Concrete Aggregates
ASTM C 645 (2004) Nonstructural Steel Framing Members
ASTM C 648 (1998) Standard Test Method for Breaking Strength
Page 36
of Ceramic Tile
ASTM C 658 (1998; R 2003) Chemical-Resistant Resin Grouts for

Bricks or Tile
ASTM C 665 (2000e1) Standard Specification for Mineral

Fiber-Blanket Thermal Insulation for Light Frame
Construction and Manufactured Housing
ASTM C 669 (1995) Standard Specification for Glazing Compounds

for Back Bedding and Face Glazing of Metal Sash
ASTM C 67 (2003a) Standard Test Methods for Sampling and

Testing Brick and Structural Clay Tile
ASTM C 685/C 685M (2001) Standard Specification for Concrete Made by

Volumetric Batching and Continuous Mixing
ASTM C 70 (1994; R 2001) Standard Test Method for Surface

Moisture in Fine Aggregate
ASTM C 700 (2002) Standard Specification for Vitrified Clay

Pipe, Extra Strength, Standard Strength, and
Perforated

Roof Insulation Board
ASTM C 728 (2003) Standard Specification for Perlite Thermal

Insulation Board
ASTM C 744 (1999) Standard Specification for Prefaced Concrete

and Calcium Silicate Masonry Units
ASTM C 754 (2000) Installation of Steel Framing Members to

Receive Screw-Attached Gypsum Panel

Concrete Culvert, Storm Drain, and Sewer Pipe

Loose-Fill Thermal Insulation

Concrete Culvert, Storm Drain, and Sewer Pipe
(Metric)
ASTM C 78 (2002) Standard Test Method for Flexural Strength

of Concrete (Using Simple Beam with Third-Point
Loading)
ASTM C 795 (2003) Standard Specification for Thermal

Insulation for Use in Contact with Austenitic
Stainless Steel
ASTM C 834 (2000e1) Latex Sealants
Page 37
ASTM C 842 (1999) Application of Interior Gypsum Plaster
ASTM C 847 (1995; R 2000) Standard Specification for Metal Lath
ASTM C 861 (1993; R 2000) Standard Practice for Determining

Metric Dimensions of Standard Series Refractory
Bricks and Shapes
ASTM C 88 (1999a) Standard Test Method for Soundness of

Aggregates by Use of Sodium Sulfate or Magnesium
Sulfate
ASTM C 881/C 881M (2002) Epoxy-Resin-Base Bonding Systems for Concrete
ASTM C 883 (1989) Standard Test Method for Effective Shrinkage

of Epoxy-Resin Systems Used with Concrete
ASTM C 892 (2000) Standard Specification for High-Temperature

Fiber Blanket Thermal Insulation
ASTM C 90 (2003) Standard Specification for Load-Bearing

Concrete Masonry Units
ASTM C 91 (2003a) Standard Specification for Masonry Cement
ASTM C 916 (1985; R 2000e1) Standard Specification for

Adhesives for Duct Thermal Insulation
ASTM C 920 (2002) Standard Specification for Elastomeric Joint

Sealants
ASTM C 921 (2003a) Standard Practice for Determining the

Properties of Jacketing Materials for Thermal
Insulation
ASTM C 923 (2002) Standard Specification for Resilient

Connectors Between Reinforced Concrete Manhole
Structures, Pipes and Laterals
ASTM C 923M (2002) Standard Specification for Resilient

Connectors Between Reinforced Concrete Manhole
Structures, Pipes and Laterals (Metric)
ASTM C 932 (2003) Surface-Applied Bonding Compounds for

Exterior Plastering
ASTM C 94/C 94M (2003a) Standard Specification for Ready-Mixed

Concrete
ASTM C 969 (2002) Standard Practice for Infiltration and

Exfiltration Acceptance Testing of Installed
Precast Concrete Pipe Sewer Lines
ASTM C 969M (2003) Standard Practice for Infiltration and

Exfiltration Acceptance Testing of Installed
Precast Concrete Pipe Sewer Lines (Metric)
Page 38
ASTM C 989 (2004) Standard Specification for Ground Granulated
Blast-Furnace Slag for Use in Concrete and Mortars
ASTM C 990/C 990M (2003a) Standard Specification for Joints for

Concrete Pipe, Manholes and Precast Box Sections
Using Preformed Flexible Joint Sealants
ASTM D 1005 (1995; R 2001) Measurement of Dry Film Thickness of

Organic Coatings Using Micrometers
ASTM D 1037 (1999) Standard Test Method for Evaluating the

Properties of Wood-Base Fiber and Particle Panel
Materials
ASTM D 1056 (2000) Standard Specification for Flexible Cellular

Materials - Sponge or Expanded Rubber
ASTM D 1084 (1997) Standard Test Method for Viscosity of

Adhesives
ASTM D 113 (1999) Standard Test Method for Ductility of

Bituminous Materials
ASTM D 1143 (1981; R 1994e1) Piles Under Static Axial

Compressive Load
ASTM D 1148 (1995; R 2001) Standard Test Method for Rubber

Deterioration - Heat and Ultraviolet Light
Discoloration of Light-Colored Surfaces
ASTM D 1149 (1999) Standard Test Method for Rubber

Deterioration - Surface Ozone Cracking in a Chamber
ASTM D 117 (2002) Standard Guide for Sampling, Test Methods,

Specifications and Guide for Electrical Insulating
Oils of Petroleum Origin
ASTM D 1187 (1995) Asphalt Base Emulsions for Use as Protective

Coatings for Metal
ASTM D 1190 (1997) Standard Specification for Concrete Joint

Sealer, Hot-Applied Elastic Type
ASTM D 1227 (1995; R 2000) Standard Specification for

Emulsified Asphalt Used as a Protective Coating for
Roofing

Polyethylene Plastics Molding and Extrusion
Materials
ASTM D 13 (2002) Spirits of Turpentine
ASTM D 1308 (2002e1) Effect of Household Chemicals on Clear and

Pigmented Organic Finishes
ASTM D 1327 (1997a) Bitumen-Saturated Woven Burlap Fabrics Used
Page 39
in Roofing and Waterproofing
ASTM D 140 (2001) Standard Practice for Sampling Bituminous

Materials
ASTM D 146 (1997e1) Standard Test Method for Sampling and

Testing Bitumen-Saturated Felts and Woven Fabrics
for Roofing and Waterproofing
ASTM D 1475 (1998; R 2003) Standard Test Method for Density of

Liquid Coatings, Inks, and Related Products
ASTM D 1527 (1999e1) Standard Specification for

Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe,
Schedules 40 and 80
ASTM D 1533 (2000) Standard Test Methods for Water in

Insulating Liquids by Coulometric Karl Fischer
Titration
ASTM D 1544 (1998) Standard Test Method for Color of

Transparent Liquids (Gardner Color Scale)
ASTM D 1556 (2000) Standard Test Method for Density and Unit
Weight of Soil in Place by the Sand-Cone Method
ASTM D 1557 (2002e1) Standard Test Methods for Laboratory

Compaction Characteristics of Soil Using Modified
Effort (56,000 ft-lbf/ft3) (2700 kN-m/m3)
ASTM D 1559 (1989) Standard Test Method for Resistance to

Plastic Flow of Bituminous Mixtures Using Marshall
Apparatus
ASTM D 1565 (1981; R 1990) Flexible Cellular Materials - Vinyl

Chloride Polymers and Copolymers (Open-Cell Foam)
ASTM D 1593 (1999) Standard Specification for Nonrigid Vinyl

Chloride Plastic Sheeting
ASTM D 1625 (1971; R 2000) Standard Specifications for

Chromated Copper Arsenate
ASTM D 1652 (1997) Standard Test Method for Epoxy Content of

Epoxy Resins
ASTM D 1668 (1997a) Standard Specification for Glass Fabrics

(Woven and Treated) for Roofing and Waterproofing
ASTM D 1693 (2001) Standard Test Method for Environmental

Stress-Cracking of Ethylene Plastics
ASTM D 173 (2003) Standard Specification for Bitumen-Saturated

Cotton Fabrics Used in Roofing and Waterproofing
ASTM D 1730 (2003) Standard Practices for Preparation of

Aluminum and Aluminum-Alloy Surfaces for Painting
Page 40
ASTM D 1751 (1999) Standard Specification for Preformed
Expansion Joint Filler for Concrete Paving and
Structural Construction (Nonextruding and Resilient
Bituminous Types)
ASTM D 1752 (2004) Standard Specification for Preformed Sponge

Rubber and Cork Expansion Joint Fillers for
Concrete Paving and Structural Construction
ASTM D 1760 (2001) Standard Specification for Pressure

Treatment of Timber Products
ASTM D 1784 (2003) Standard Specification for Rigid Poly (Vinyl

Chloride) (PVC) Compounds and Chlorinated Poly
(Vinyl Chloride) (CPVC) Compounds
ASTM D 1785 (2003) Standard Specification for Poly (Vinyl

Chloride) (PVC), Plastic Pipe, Schedules 40, 80,
and 120
ASTM D 1850 (1974; R 1979) Concrete Joint Sealer,

Cold-Application Type
ASTM D 1863 (2003) Standard Specification for Mineral Aggregate

Used on Built-Up Roofs
ASTM D 2000 (2003a) Standard Classification System for Rubber

Products in Automotive Applications
ASTM D 2016 (1974; R 1983) Moisture Content of Wood
ASTM D 2027 (1997; R 2004) Standard Specification for Cutback

Asphalt (Medium-Curing Type)
ASTM D 2028 (1997; R 2004) Standard Specification for Cutback

Asphalt (Rapid-Curing Type)
ASTM D 2092 (1995; R 2001e1) Standard Practice for Preparation

of Zinc-Coated Galvanized Steel Surfaces for Paint
ASTM D 2103 (2003) Standard Specification for Polyethylene Film

and Sheeting
ASTM D 2104 (2003) Standard Specification for Polyethylene (PE)

Plastic Pipe, Schedule 40
ASTM D 2135 (1983) Hard Rubbers
ASTM D 2167 (1994; R 2001) Standard Test Method for Density and
Unit Weight of Soil In-Place by the Rubber Balloon
Method
ASTM D 2170 (2001a) Standard Test Method for Kinematic

Viscosity of Asphalts (Bitumens)
ASTM D 2178 (1997a) Standard Specification for Asphalt Glass

Felt Used in Roofing and Waterproofing
Page 41
ASTM D 2216 (1998) Standard Test Method for Laboratory
Determination of Water (Moisture) Content of Soil
and Rock by Mass
ASTM D 2235 (2001) Standard Specification for Solvent Cement

for Acrylonitrile-Butadiene-Styrene (ABS) Plastic
Pipe and Fittings

Plastic Pipe (SIDR-PR), Based on Controlled Inside
Diameter
ASTM D 2240 (2003) Standard Test Method for Rubber Property -

Durometer Hardness
ASTM D 2241 (2004) Standard Specification for Poly(Vinyl

Chloride) (PVC) Pressure Rated Pipe (SDR Series)
ASTM D 226 (1997a) Standard Specification for

Asphalt-Saturated Organic Felt Used in Roofing and
Waterproofing

Coal-Tar-Saturated Organic Felt Used in Roofing and
Waterproofing
ASTM D 2287 (1996; R 2001) Nonrigid Vinyl Chloride Polymer and

Copolymer Molding and Extrusion Compounds
ASTM D 2301 (1999) Standard Specification for Vinyl Chloride

Plastic Pressure-Sensitive Electrical Insulating
Tape
ASTM D 2308 (2002) Standard Specification for Thermoplastic

Polyethylene Jacket for Electrical Wire and Cable
ASTM D 2321 (2000) Standard Practice for Underground

Installation of Thermoplastic Pipe for Sewers and
Other Gravity-Flow Applications
ASTM D 2399 (1983; R 1999) Standard Practice for Selection of

Cutback Asphalts

Plastic Pipe, Schedules 40 and 80 Based on Outside
Diameter
ASTM D 2464 (1999) Standard Specification for Threaded

Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,
Schedule 80
ASTM D 2466 (2002) Standard Specification for Poly(Vinyl

Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
ASTM D 2467 (2002) Standard Specification for Socket-Type

Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings,
Schedule 80
Page 42
ASTM D 2468 (1993) Standard Specification for
Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe
Fittings, Schedule 40
ASTM D 2471 (1999) Standard Test Method for Gel Time and Peak
Exothermic Temperature of Reacting Thermosetting
Resins
ASTM D 2472 (2000) Sulphur Hexafluoride
ASTM D 249 (1989) Standard Specification for Asphalt Roll

Roofing (Organic Felt) Surfaced with Mineral
Granules
ASTM D 25 (1999e1) Round Timber Piles
ASTM D 2513 (2004) Thermoplastic Gas Pressure Pipe, Tubing, and

Fittings
ASTM D 2517 (2000e1) Standard Specification for Reinforced

Epoxy Resin Gas Pressure Pipe and Fittings
ASTM D 2563 (1994; R 2002e1) Standard Practice for Classifying

Visual Defects in Glass-Reinforced Plastic Laminate
Parts
ASTM D 2564 (2002) Standard Specification for Solvent Cements

for Poly(Vinyl Chloride) (PVC) Plastic Piping
Systems
ASTM D 2566 (1986) Standard Test Method for Linear Shrinkage of

Cured Thermosetting Casting Resins During Cure
ASTM D 257 (1999) Standard Test Methods for D-C Resistance or

Conductance of Insulating Materials
ASTM D 2583 (1995; R 2001e1) Standard Test Method for

Indentation Hardness of Rigid Plastics by Means of
a Barcol Impressor
ASTM D 2609 (2002) Standard Specification for Plastic Insert

Fittings for Polyethylene (PE) Plastic Pipe
ASTM D 2626 (1997b) Standard Specification for

Asphalt-Saturated and Coated Organic Felt Base
Sheet Used in Roofing
ASTM D 2628 (1991; R 1998) Standard Specification for Preformed

Polychloroprene Elastomeric Joint Seals for
Concrete Pavements
ASTM D 2643 (1998) Prefabricated Asphalt Canal Ditch, or Pond

Liner (Exposed Type)

Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40,
Plastic Drain, Waste, and Vent Pipe and Fittings
Page 43
ASTM D 2665 (2004) Poly (Vinyl Chloride) (PVC) Plastic Drain,
Waste, and Vent Pipe and Fittings

Acrylonitrile-Butadene-Styrene (ABS) Composite
Sewer Piping
ASTM D 2683 (1998) Standard Specification for Socket-Type

Polyethylene Fittings for Outside
Diameter-Controlled Polyethylene Pipe and Tubing

Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe
and Fittings
ASTM D 2822 (1991; R 1997e1) Standard Specification for Asphalt

Roof Cement
ASTM D 2824 (2004)Standard Specification for Aluminum-Pigmented

Asphalt Roof Coatings, Non-Fibered, Asbestos
Fibered, and Fibered without Asbestos
ASTM D 2855 (1996; R 2002) Standard Practice for Making

Solvent-Cemented Joints with Poly(Vinyl Chloride)
(PVC) Pipe and Fittings
ASTM D 2922 (2001) Standard Test Methods for Density of Soil

and Soil-Aggregate in Place by Nuclear Methods
(Shallow Depth)
ASTM D 2939 (2003) Emulsified Bitumens Used as Protective

Coatings
ASTM D 297 (1993; R 2002e1) Standard Test Method for Rubber

Products - Chemical Analysis
ASTM D 3017 (2001) Standard Test Method for Water Content of

Soil and Rock in Place by Nuclear Methods (Shallow
Depth)
ASTM D 3034 (2000) Standard Specification for Type PSM

Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D 312 (2005) Standard Specification for Asphalt Primer

Used in Roofing, Dampproofing, and Waterproofing
ASTM D 3139 (1998) Standard Specification for Joints for

Plastic Pressure Pipes Using Flexible Elastomeric
Seals
ASTM D 3155 (1998) Test Method for Lime Content of Uncured

Soil-Lime Mixtures
ASTM D 3212 (1996a; R 2003) Standard Specification for Joints

for Drain and Sewer Plastic Pipes Using Flexible
Elastomeric Seals
Page 44
ASTM D 3261 (2003) Standard Specification for Butt Heat Fusion
Polyethylene (PE) Plastic Fittings for Polyethylene
(PE) Plastic, Pipe and Tubing
ASTM D 3282 (1993; R 1997e1) Standard Classification of Soils

and Soil-Aggregate Mixtures for Highway
Construction Purposes
ASTM D 3399 (1981; R 1995) General-Purpose Synthetic Detergent

Liquid
ASTM D 3487 (2000) Standard Specification for Mineral

Insulating Oil Used in Electrical Apparatus
ASTM D 3612 (2002) Standard Test Method for Analysis of Gases

Dissolved in Electrical Insulating Oil by Gas
Chromatography
ASTM D 371 (1989) Standard Specification for Asphalt Roll

Roofing (Organic Felt) Surfaced with Mineral
Granules; Wide Selvage
ASTM D 3740 (2001) Standard Practice for Evaluation of Agencies

Engaged in the Testing and/or Inspection of Soil
and Rock as Used In Engineering Design and
Construction
ASTM D 3744 (2003) Standard Test Method for Aggregate

Durability Index
ASTM D 3841 (1997; R 2001) Glass Fiber-Reinforced Polyester

Plastic Panels
ASTM D 390 (1992; R 1999) Standard Specification for Coal-Tar

Creosote for the Preservative Treatment of Piles,
Poles, and Timbers for Marine, Land, and Fresh
Water Use
ASTM D 395 (2003) Rubber Property - Compression Set
ASTM D 4066 (2001a) Standard Specification for Nylon Injection

and Extrusion Materials (PA)
ASTM D 4073 (2003) Standard Test Method for Tensile-Tear

Strength of Bituminous Roofing Membranes
ASTM D 41 (2005) Standard Specification for Asphalt Primer

ASTM D 4101 (2003b) Propylene Plastic Injection and Extrusion

Materials
ASTM D 412 (1998a; R 2002e1) Standard Test Methods for

Vulcanized Rubber and Thermoplastic Elastomers -
Tension
ASTM D 4161 (2001) Standard Specification for Fiberglass
Page 45
(Glass-Fiber Reinforced Thermosetting Resin) Pipe
Joints Using Flexible Elastomeric Seals
ASTM D 422 (2002) Standard Test Method for Particle-Size

Analysis of Soils
ASTM D 43 (2000) Standard Specification for Coal Tar Primer

ASTM D 4318 (2000) Standard Test Method for Liquid Limit,

Plastic Limit, and Plasticity Index of Soils
ASTM D 4397 (2002) Standard Specification for Polyethylene

Sheeting for Construction, Industrial, and
Agricultural Applications
ASTM D 4402 (2002) Standard Test Method for Viscosity

Determination of Asphalt at Elevated Temperatures
Using a Rotational Viscometer
ASTM D 445 (2003) Standard Test Method for Kinematic Viscosity

of Transparent and Opaque Liquids (and the
Calculation of Dynamic Viscosity)
ASTM D 449 (2003) Standard Specification for Asphalt Used in

Dampproofing and Waterproofing
ASTM D 450 (1996; R 2000e1) Standard Specification for

Coal-Tar Pitch used in Roofing, Dampproofing, and
Waterproofing
ASTM D 4586 (2000) Standard Specification for Asphalt Roof

Cement, Asbestos-Free
ASTM D 4601 (2004) Standard Specification for Asphalt-Coated

Glass Fiber Base Sheet Used in Roofing
ASTM D 4635 (2001) Low-Density Polyethylene Films for General

Use and Packaging Applications
ASTM D 4637 (2004) Standard Specification for EPDM Sheet Used

in Single-Ply Roof Membrane
ASTM D 4689 (1999) Standard Specification for Adhesive,

Casein-Type
ASTM D 4690 (1999) Standard Specification for Urea Formaldehyde

Resin Adhesives
ASTM D 471 (1998e1) Standard Test Method for Rubber Property -

Effect of Liquids
ASTM D 4897 (2001) Standard Specification for Asphalt-Coated

Glass-Fiber Venting Base Sheet Used in Roofing
ASTM D 490 (1992; R 2001) Standard Specification for Road Tar
Page 46
ASTM D 4976 (2002) Standard Specification for Polyethylene
Plastics Molding and Extrusion Materials
ASTM D 5 (1997) Standard Test Method for Penetration of

Bituminous Materials
ASTM D 5147 (2002ae1) Standard Test Methods for Sampling and

Testing Modified Bituminous Sheet Material
ASTM D 517 (1998) Standard Specification for Asphalt Plank
ASTM D 523 (1989; R 1999) Standard Test Method for Specular

Gloss
ASTM D 5359 (1998; R 2004) Standard Specification for Glass

Cullet Recovered from Waste for use in Manufacture
of Glass Fiber
ASTM D 538 (1985; R 1997) Trisodium Phosphate
ASTM D 570 (1998) Standard Test Method for Water Absorption of

Plastics
ASTM D 573 (2002) Standard Test Method for

Rubber-Deterioration in an Air Oven
ASTM D 579 (1997) Standard Specification for Greige Woven

Glass Fabrics
ASTM D 6 (1995; R 2000e1) Standard Test Method for Loss on

Heating of Oil and Asphaltic Compounds
ASTM D 6162 (2000a) Standard Specification for Styrene

Butadiene Styrene (SBS) Modified Bituminous Sheet
Materials Using a Combination of Polyester and
Glass Fiber Reinforcements
ASTM D 6163 (2000e1) Standard Specification for Styrene

Butadiene Styrene (SBS) Modified Bituminous Sheet
Materials Using Glass Fiber Reinforcements
ASTM D 6164 (2000) Standard Specification for Styrene Butadiene

Styrene (SBS) Modified Bituminous Sheet Materials
Using Polyester Reinforcements
ASTM D 6222 (2002) Standard Specification for Atactic

Polypropylene (APP) Modified Bituminous Sheet
Materials Using Polyester Reinforcements
ASTM D 6223 (2002) Standard Specification for Atactic

Polypropylene (APP) Modified Bituminous Sheet
Materials Using a Combination of Polyester and
Glass Fiber Reinforcements
ASTM D 624 (2000e1) Standard Test Method for Tear Strength of

Conventional Vulcanized Rubber and Thermoplastic
Elastomers
Page 47
ASTM D 6298 (2000) Standard Specification for Fiberglass
Reinforced Styrene-Butadiene-Styrene (SBS) Modified
Bituminous Sheet with Factory Applied Metal Surface
ASTM D 635 (2003) Standard Test Method for Rate of Burning

and/or Extent and Time of Burning of
Self-Supporting Plastics in a Horizontal Position
ASTM D 6368 (2002) Standard Specification for Vapor-Degreasing

Grade normal - Propyl Bromide
ASTM D 638 (2002a) Standard Test Method for Tensile Properties

of Plastics
ASTM D 638M (1996) Standard Test Method for Tensile Properties

of Plastics (Metric)
ASTM D 6848 (2002) Standard Specification for Aluminum

Pigmented Emulsified Asphalt Used as a Protective
Coating for Roofing
ASTM D 696 (2003) Standard Test Method for Coefficient of

Linear Thermal Expansion of Plastics Between -30
degrees C and 30 Degrees C
ASTM D 746 (1998e1) Standard Test Method for Brittleness

Temperature of Plastics and Elastomers by Impact
ASTM D 75 (2003) Standard Practice for Sampling Aggregates
ASTM D 751 (2000) Coated Fabrics
ASTM D 756 (1993) Standard Practice for Determination of

Weight and Shape Changes of Plastics Under
Accelerated Service Conditions
ASTM D 790 (2003) Standard Test Methods for Flexural

Properties of Unreinforced and Reinforced Plastics
and Electrical Insulating Materials
ASTM D 797 (1982; R 1989) Rubber Property - Young's Modulus at

Normal and Subnormal Temperatures
ASTM D 828 (1997; R 2002) Standard Test Method for Tensile

Properties of Paper and Paperboard Using
Constant-Rate-of-Elongation-Apparatus
ASTM D 877 (2002) Standard Test Method for Dielectric

Breakdown Voltage of Insulating Liquids Using Disk
Electrodes
ASTM D 92 (2002b) Standard Test Method for Flash and Fire

Points by Cleveland Open Cup
ASTM D 924 (1999) Standard Test Method for Dissipation Factor

(or Power Factor) and Relative Permittivity
(Dielectric Constant) of Electrical Insulating
Page 48
Liquids

Penetration-Graded Asphalt Cement for Use in
Pavement Construction
ASTM D 974 (1997) Standard Test Method for Acid and Base
Number by Color-Indicator Titration
ASTM D 977 (2003) Standard Specification for Emulsified Asphalt
ASTM E 1 (2003a) Standard Specification for ASTM

Liquid-in-Glass Thermometers
ASTM E 108 (2004) Standard Test Methods for Fire Tests of Roof
Coverings
ASTM E 11 (2001) Standard Specification for Wire-Cloth and

Sieves for Testing Purposes
ASTM E 1146 (1997; R 2002) Muriatic Acid (Technical Grade

Hydrochloric Acid)
ASTM E 1155/E 1155M (1996) Standard Test Method for Determining Floor
Flatness and Floor Levelness Numbers
ASTM E 119 (2000a) Standard Test Methods for Fire Tests of

Building Construction and Materials
ASTM E 1264 (1998) Standard Classification for Acoustical

Ceiling Products
ASTM E 1289 (2003) Standard Specification for Reference

Specimen for Sound Transmission Loss
ASTM E 152 (1981; Rev A) Standard Methods of Fire Tests of

Door Assemblies
ASTM E 154 (1999) Standard Test Methods for Water Vapor

Retarders Used in Contact with Earth Under Concrete
Slab, on Walls, or as Ground Cover
ASTM E 164 (2003) Ultrasonic Contact Examination of Weldments
ASTM E 165 (2002) Standard Test Method for Liquid Penetrant

Examination
ASTM E 2074 (2004) Standard Test Method for Fire Tests of Door
Assemblies, Including Positive Pressure Testing of
Side-Hinged and Pivoted Swinging Door Assemblies
ASTM E 283 (2004) Determining the Rate of Air Leakage Through

Exterior Windows, Curtain Walls, and Doors, Under
Specified Pressure Differences Across the Specimen
ASTM E 329 (2003) Agencies as Used in Construction
Page 49
ASTM E 330 (2002) Structural Performance of Exterior Windows,
Curtain Walls, and Doors by Uniform Static Air
Pressure Difference
ASTM E 331 (2000) Standard Test Method for Water Penetration

of Exterior Windows, Curtain Walls, and Doors by
Uniform Static Air Pressure Difference
ASTM E 380 (2002) American National Standard for Use of the

International System of Units (SI) The Modernized
Metric System
ASTM E 413 (1987; R 1999) Standard Classification for Rating

Sound Insulation
ASTM E 437 (1992) Standard Specification for Cloth and Screen,

Industrial Wire (Square Opening Series)
ASTM E 488 (1996; R 2003) Standard Test Methods for Strength

of Anchors in Concrete and Masonry Elements
ASTM E 621 (1994; R 1999e1) Standard Practice for Use of

Metric (SI) Units in Building Design and
Construction
ASTM E 648 (2003) Standard Test Method Critical Radiant Flux

of Floor Covering Systems Using a Radiant Heat
Energy Source
ASTM E 709 (2001) Standard Guide for Magnetic Particle

Examination
ASTM E 814 (2002) Standard Test Method for Fire Tests of

Through-Penetration Fire Stops
ASTM E 84 (2005) Standard Test Method for Surface Burning

Characteristics of Building Materials
ASTM E 86 (1986) Zinc Base Alloy; Die Castings
ASTM E 90 (2004) Standard Test Method for Laboratory

Measurement of Airborne Sound Transmission Loss of
Building Partitions and Elements
ASTM E 903 (1996) Standard Test Method for Solar Absorptance,

Reflectance, and Transmittance of Materials Using
Integrating Spheres
ASTM E 96 (2000e1) Standard Test Methods for Water Vapor

Transmission of Materials
ASTM F 104 (2003) Standard Classification System for

Nonmetallic Gasket Materials
ASTM F 1040 (1987; R 2001) Standard Specification for Filter

Units, Air Conditioning, Viscous - Improvement and
Dry Types, Replaceable
Page 50
ASTM F 1066 (1999) Standard Specification for Vinyl Composition
Floor Tile
ASTM F 1083 (1997; R 2003) Standard Specification for Pipe,

Steel Hot-Dipped Zinc Coated (Galvanized) Welded,
for Fence Structures
ASTM F 1120 (1987; R 1998) Standard Specification for Circular

Metallic Bellows-Type Expansion Joints for Piping
Applications
ASTM F 1137 (2000) Standard Specification for Phosphate/Oil and

Phosphate/Organic Corrosion Protective Coatings for
Fasteners
ASTM F 1234 (1993) Standard Specification for Protective

Coating on Steel Framework for Fences
ASTM F 1303 (2004) Sheet Vinyl Floor Covering with Backing
ASTM F 1344 (2000) Standard Specification for Rubber Floor Tile
ASTM F 1376 (1992) Standard Guide for Metallurgical Analysis

for Gas Distribution System Components
ASTM F 1417 (1992) Standard Test Method for Installation

Acceptance of Plastic Gravity Sewer Lines Using Low
Pressure Air
ASTM F 147 (1987; R 2003) Standard Test Method for Flexibility

of Non-Metallic Gasket Material
ASTM F 1667 (2002) Standard Specification for Driven

Fasteners: Nails, Spikes, Staples
ASTM F 312 (2003) Standard Test Methods for Microscopical

Sizing an Counting Particles from Aerospace Fluids
on Membrane Filters
ASTM F 331 (2000) Standard Test Method for Nonvolatile Residue

of Solvent Extract from Aerospace Components (Using
Flash Evaporator)
ASTM F 436 (2003) Hardened Steel Washers
ASTM F 436M (2003) Hardened Steel Washers (Metric)
ASTM F 437 (1999) Standard Specification for Threaded

Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic
Pipe Fittings, Schedule 80
ASTM F 438 (2002e1) Standard Specification for Socket-Type

ASTM F 439 (2002e1) Standard Specification for Socket-Type

Page 51
ASTM F 441/F 441M (2002) Standard Specification for Chlorinated

Poly(Vinyl Chloride) (CPVC) Plastic Pipe Schedules
40 and 80
ASTM F 442/F 442M (1999) Standard Specification for Chlorinated

Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
ASTM F 477 (2002e1) Standard Specification for Elastomeric

Seals (Gaskets) for Joining Plastic Pipe
ASTM F 512 (1995; R 2001e1) Standard Specification for

Smooth-Wall Poly (Vinyl Chloride) (PVC) Conduit and
Fittings for Underground Installation
ASTM F 541 (2000) Standard Specification for Alloy Steel

Eyebolts
ASTM F 568M (2004) Standard Specification for Carbon and Alloy

Steel Externally Threaded Metric Fasteners
ASTM F 594 (2002) Carbon and Alloy Steel Nuts
ASTM F 626 (1996a; R 2003) Standard Specification for Fence

Fittings
ASTM F 669 (1998) Standard Specification for Strength

Requirements of Metal Posts and Rails for
Industrial Chain Link Fence
ASTM F 683 (2003a) Standard Practice for Selection and

Application of Thermal Insulation for Piping and
Machinery
ASTM F 794 (2003) Standard Specification for Poly(Vinyl

Chloride) (PVC) Profile Gravity Sewer Pipe and
Fittings Based on Controlled Inside Diameter
ASTM F 835 (2003) Alloy Steel Socket Button and Flat

Countersunk Head Cap Screws
ASTM F 835M (2003) Alloy Steel Socket Button and Flat

Countersunk Head Cap Screws (Metric)
ASTM F 836M (2002) Standard Specification for Style 1 Stainless

Steel Metric Nuts
ASTM G 104 (1989) Standard Test Method for Assessing Galvanic

Corrosion Caused by the Atmosphere
BRICK INDUSTRY ASSOCIATION (BIA)
BIA Tech Note 20 Rev II (1990; R 2000) Cleaning Brick Masonry
BRITISH STANDARDS INSTITUTE (BSI)
Page 52
BSI 4994 (2003) Design and Construction of Vessels and Tanks
in Reinforced Plastics
BUILDERS HARDWARE MANUFACTURERS ASSOCIATION (BHMA)
BHMA A156.1 (2000) Butts and Hinges
BHMA A156.13 (2002) Locks and Latches, Mortise
BHMA A156.16 (2002) Auxiliary Hardware
BHMA A156.17 (1999) Self Closing Hinges and Pivots
BHMA A156.18 (2003) Hardware - Materials and Finishes
BHMA A156.2 (2003) Bored and Preassembled Locks and Latches
BHMA A156.21 (2001) Thresholds
BHMA A156.3 (2001) Exit Devices
BHMA A156.4 (2000) Door Controls (Closers)
BHMA A156.5 (2001) Auxiliary Locks & Associated Products
BHMA A156.6 (2001) Architectural Doors and Trim
BHMA A156.8 (2000) Door Controls (Overhead Holders)
BHMA A156.9 (2001) Cabinet Hardware
CARPET AND RUG INSTITUTE (CRI)
CRI 104 (2002) Installation Specification of Commerical

Carpet
COMPRESSED GAS ASSOCIATION (CGA)
CGA G-10.1 (1997) Commodity Specification for Nitrogen
CGA P-39 (2003) Oxygen-Rich Atmospheres
CONCRETE REINFORCING STEEL INSTITUTE (CRSI)
CRSI 1 MSP (2001e27) Manual of Standard Practice
CRSI A48.1 (1986) Concrete Construction - Forms for One Way

Concrete Joist Construction
CRSI A48.2 (1986) Concrete Construction - Forms for Two Way

Concrete Joist Construction
CRSI DA4 (1998) Manual of Standard Practice
CRANE MANUFACTURERS ASSOCIATION OF AMERICA (CMAA)
Page 53
CMAA 70 (2004) Top Running Bridge and Gantry Type Multiple
Girder Electric Overhead Traveling Cranes
CMAA 74 (2004) Specification for Top Running and Under

Running Single Girder Electric Traveling Cranes
Utilizing Under Running Trolley Hoist
CSA INTERNATIONAL (CSA)
CSA Directory Canadian Standard Associations Certified Product

Listings
DOOR AND HARDWARE INSTITUTE (DHI)
DHI A115 (1990) Steel Door Preparation Standards
DHI A115.1 (1990) Preparation for Mortise Locks for 1-3/8 Inch
35 millimeter and 1-3/4 Inch 44 millimeter Doors
DHI A115.2 (1988) Door and Frame Preparation for Bored or

Cylindrical Locks for 1-3/8 Inch 35 millimeter and
1-3/4 Inch 44 millimeter Doors
DHI A115.4 (1994) Standard Steel Door and Frame Preparation

for Lever Extension Flush Bolts
ELECTRONIC INDUSTRIES ALLIANCE (EIA)
EIA 310-D (1992) Cabinets, Racks, Panels, and Associated

Equipment
EIA 416 (1974; R 1981) Filters, Radio Interference
EIA 422-B (2000) Electrical Characteristics of Balanced

Voltage Digital Interface Circuits
EIA 443 (1985) Solid State Relays, EIA/NARM, Standard for
EIA 455-104A (2000) FOTP-104 Fiber Optic Cable Cyclic Flexing

Test
EIA 455-164A (1991) FOTP-164 Single-Mode Fiber, Measurement of

Mode Field Diameter by Far-Field Scanning
EIA 455-165 (1993) FOTP-165 Single-Mode Fiber, Measurement of

Mode Field Diameter by Near-Field Scanning
EIA 455-167A (1992; R 2000) FOTP-167 Mode Field Diameter

Measurement Variable Aperture Method in the Farfield
EIA 455-168A (1992) FOTP-168 Chromatic Dispersion Measurement of

Multimode Graded-Index and Single-Mode Optical
Fibers by Spectral Group Delay Measurement in the
Time Domain
EIA 455-169A (2001) FOTP-169 Chromatic Dispersion Measurement of

Optical Fibers by the Phase-Shift Method
Page 54
EIA 455-25C (1996) FOTP-25 Repeated Impact Testing of
Single-Mode Fiber Optic Cables and Cable Assemblies
EIA 455-30B (1991) Frequency Domain Measurement of Multitude

Optical Fiber Information Transmission Capacity
EIA 455-33A (1988) FOTP-33 Fiber Optic Cable Tensile Loading

and Bending Test
EIA 455-41 (1993) FOTP-41 Compressive Loading Resistance of

Fiber Optic Cables
EIA 455-46A (1990) FOTP-46 Spectral Attenuation Measurement for

Long-Length, Graded-Index Optical Fibers
EIA 455-47B (1992) FOTP-47 Output For Field Radiation Pattern

Measurement
EIA 455-51A (2001) FOTP-51 Pulse Distortion Measurement of

Mulitmode Glass Optical Fiber Information
Transmission Capacity
EIA 455-53A (2001) FOTP-53 Attenuation by Substitution

Measurement for Multimode Graded-Index Optical
Fibers or Fiber Assemblies Used in Long Length
Communications Systems
EIA 455-78B (2002) Optical Fibres - Part 1-40: Measurement

Methods and Text Procedures - Attenuation
EIA 455-80B (1996) FOTP-80 Cutoff Wavelength of Uncabled

Single-Mode Fiber by Transmitted Power
EIA 455-81B (2000) FOTP-81 Compound Flow (Drip) Test for Filled
Fiber Optic Cable
EIA 455-82B (1991) FOTP-82 Fluid Penetration Test for

Fluid-Blocked Fiber Optic Cable
EIA 46 (1987) Test Procedure for Resistance to Soldering

(Vapor Phase Technique) for Surface Mount Devices
EIA 480 (1981) Toggle Switches
FLAT GLASS MARKETING ASSOCIATION (FGMA)
FGMA-01 (2001) Glazing Manual
FLORIDA DEPARTMENT OF COMMUNITY AFFAIRS BUILDING CODES AND

STANDARDS (FBC)
FBC Chapter 15 (2004) Florida Building Code Chapter 15 High

Velocity Hurricane Zones
FLUID SEALING ASSOCIATION (FSA)
FSA-0017 (1995) Non-Metallic Expansion Joints and Flexible
Page 55
Pipe Connectors Technical Handbook, 6th Edition
FM GLOBAL (FM)
FM AS 4470 (1986; R 1992) Class I Roof Covers
FM P7825 (2003) Approval Guide
FM P7825c (2003) Approval Guide Building Materials
FM P9513 (1996) Loss Prevention Data for Roofing Contractors
FOUNDATION FOR CROSS-CONNECTION CONTROL AND HYDRAULIC RESEARCH

(FCCCHR)
FCCCHR Manual (1988; 9th Ed) Manual of Cross-Connection Control
HARDWOOD PLYWOOD & VENEER ASSOCIATION (HPVA)
HPVA HP-1 (2000) Standard for Hardwood and Decorative Plywood
HYDRAULIC INSTITUTE (HI)
HI SCRRP (1994) Standards for Centrifugal, Rotary and

Reciprocating Pumps
HYDRONICS INSTITUTE DIVISION OF GAMA (HYI)
HYI RATINGS (2004) 1=B=R Ratings for Boilers, Baseboard

Radiation, and Finned Tube (Commercial)
ILLUMINATING ENGINEERING SOCIETY OF NORTH AMERICA (IESNA)
IES LM-48 (2001) Guide for Calibration of Photoelectric

Control Devices
IES RP-1 (1993) Office Lighting
IESNA HB-9 (2000) IES Lighting Handbook
IESNA RP-8 (2000) Roadway Lighting
INDUSTRIAL FASTENERS INSTITUTE (IFI)
IFI 502 (1982) Metric Tapping Screws
INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS (IEEE)
ANSI C57.19.01 (2000) General Requirements and Test Procedure for

Outdoor Power Apparatus Bushings
IEEE 386 (1995; R 2001) Standard for Separable Insulated

Connector Systems for Power Distribution Systems
Above 600V
IEEE C12.1 (2001) Code for Electricity Metering
Page 56
IEEE C135.1 (1999) Standard for Zinc-Coated Steel Bolts and
Nuts for Overhead Line Construction
IEEE C136.10 (1996) Roadway Lighting Equipment-Locking-Type

Photocontrol Devices and Mating Receptacles -
Physical and Electrical Interchangeability and
Testing
IEEE C2 (2002) National Electrical Safety Code
IEEE C37.13 (1990; R 1995) Low-Voltage AC Power Circuit

Breakers Used in Enclosures
IEEE C37.20.1 (2002) Standard for Metal-Enclosed Low-Voltage

Power Circuit-Breaker Switchgear
IEEE C37.20.2 (1999) Metal-Clad and Station-Type Cubicle

Switchgear
IEEE C37.20.3 (2001) Metal-Enclosed Interrupter Switchgear
IEEE C37.35 (1995) Guide for the Application, Installation,

Operation, and Maintenance of High-Voltage Air
Disconnecting and Load Interrupter Switches
IEEE C37.71 (2001) Standard for Three-Phase, Manually Operated

Subsurface Load-Interrupting Switches for
Alternating-Current Systems
IEEE C37.90 (1994) Standard for Relays and Relay Systems

Associated With Electric Power Apparatus
IEEE C57.12.00 (2000) Standard General Requirements for

Liquid-Immersed Distribution, Power, and Regulating
Transformers
IEEE C57.12.01 (1998) Standard General Requirements for Dry-Type

Distribution and Power Transformers Including Those
With Solid Cast and/or Resin - Encapsulated Windings
IEEE C57.12.80 (2002) Standard Terminology for Power and

Distribution Transformers
IEEE C57.12.90 (1999) Standard Test Code for Liquid-Immersed

Distribution, Power, and Regulating Transformers
IEEE C57.12.91 (2001) Standard Test Code for Dry-Type Distribution

and Power Transformers
IEEE C57.13 (1993) Standard Requirements for Instrument

Transformers
IEEE C62.11 (1999) Standard for Metal-Oxide Surge Arresters for

Alternating Current Power Circuits (>1kV)
IEEE Std 1 (2000) Standard General Principles for Temperature

Limits in the Rating of Electrical Equipment and
Page 57
for the Evaluation of electrical Insulation
IEEE Std 112 (1996) Standard Test Procedure for Polyphase

Induction Motors and Generators
IEEE Std 18 (2002) Shunt Power Capacitors
IEEE Std 32 (1972; R 1991) Standard Requirements, Terminology,

and Test Procedure for Neutral Grounding Devices
IEEE Std 383 (1974; R 1992) Standard for Type Test Class 1E
Electric Cables, Field Splices, and Connections for
Nuclear Power Generating Stations
IEEE Std 4 (1995) Standard Techniques for High Voltage Testing
IEEE Std 400 (2001) Guide for Field Testing and Evaluation of
the Insulation of Shielded Power Cable Systems
IEEE Std 45 (2002) Recommended Practice for Electric

Installations on Shipboard
IEEE Std 48 (1996; R 2003) Standard Test Procedures and

Requirements High-Voltage Alternating-Current Cable
Terminations 2.5 kV through 765 kV
IEEE Std 515 (1997) Standard for the Testing, Design,

Installation, and Maintenance of Electrical
Resistance Heat Tracing for Industrial Applications
IEEE Std 57.19.00 (1991; R 1997) Standard General Requirements and

Test Procedures for Outdoor Apparatus Bushings
IEEE Std 62 ((1995) Guide for Diagnostic Field Testing of

Electric Power Apparatus-Part 1: Oil Filled Power
Transformers, Regulators, and Reactors
IEEE Std 81 (1983) Guide for Measuring Earth Resistivity,

Ground Impedance, and Earth Surface Potentials of a
Ground System
INTERNATIONAL CODE COUNCIL (ICC)
IBC Chapter 16 (2000) International Building Code Chapter 16

Structural Design
ICC A117.1 (1998) American National Standards for Accessible

and Usable Buildings and Facilities
ICC IBC (2003) International Building Code
ICC IFGC (2003) International Fuel Gas Code
ICC IMC (2003) International Mechanical Code
ICC IPC (2003) International Plumbing Code
Page 58
IFC 1414 (2004) Portable Fire Extinguishers(Where
Required)(Construction, Alteration, Demolition)
IFC 906 (2004) Portable Fire Extinguishers
INTERNATIONAL ELECTRICAL TESTING ASSOCIATION (NETA)
NETA ATS (2003) Acceptance Testing Specifications for

Electrical Power Distribution Equipment Systems
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO)
ISO 1940-1 (2003) Mechanical Vibration - Balance Quality

Requirements of Rigid Rotors - Part 1:
Determination of Permissible Residual Unbalance
ISO 261 (1998) ISO General Purpose Metric Screw Threads -

General Plan
ISO 262 (1998) ISO General Purpose Metric Screw Threads -

Selected Sizes for Screws, Bolts and Nuts
ISO 263 (1973) ISO Inch Screw Threads - General Plan and
Selection for Screws, Bolts and Nuts - Diameter
Range 0.06 to 6 inch
ISO 2858 (1975) End Suction Centrifugal Pump (Rating 16 Bar)

Designation Nominal Duty Point and Dimensions
ISO 4126-1 (2004) Safety Devices for Protection Against

Excessive Pressure - Part 1: Safety Valves
ISO 5199 (2002) Technical Specifications for Centrifugal

Pumps, Class II
ISO 5209 (1977) General Purpose Industrial Valves - Marking
ISO 5752 (1982) Metal Valves for Use in Flanged Pipe Systems
- Face to Face and Center to Center Dimensions
ISO 7005-1 (1992) Metallic Flanges
ISO 7005-2 (1988) Metallic Flanges Part 2: Cast Iron Flanges
IPI - ASSOCIATION CONNECTING ELECTRONICS INDUSTRIES (IPC)
IPC D330 (1992) Switches
ISA - THE INSTRUMENTATION, SYSTEMS AND AUTOMATION SOCIETY (ISA)
ISA RP60.9 (1981) Piping Guide for Control Centers
ISA RP7.1 (1956) Pneumatic Control Circuit Pressure Test
ISA S12.13.01 (2003) Performance Requirements, for Combustible

Gas Detectors
Page 59
ISA S7.0.01 (1996) Quality Standard for Instrument Air
JOINT INDUSTRIAL COUNCIL (JIC)
JIC-01 (1967) Electrical Standards for Mass Production

Equipment
KENNEDY SPACE CENTER HANDBOOK (KHB)
KHB 1870.1 (2000) KSC Sanitation Handbook
MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS

INDUSTRY (MSS)
MSS SP-104 (2003) Wrought Copper LW Solder Joint Pressure

Fittings
MSS SP-125 (2000) Gray Iron and Ductile Iron In-Line,

Spring-Loaded, Center-Guided Check Valves
MSS SP-25 (1998) Standard Marking System For Valves,

Fittings, Flanges, and Unions
MSS SP-43 (1991; R 2001) Wrought Stainless Steel Butt -

Welding Fittings Including Reference to Other
Corrosion Resistant Materials
MSS SP-51 (2003) Class 150 LW Corrosion Resistant Cast

Flanges and Flanged Fittings
MSS SP-53 (1999) Quality Standard for Steel Castings and

Forgings for Valves, Flanges and Fittings and Other
Piping Components Magnetic, Particle Examination
Method
MSS SP-54 (1999) Quality Standard for Steel Castings for

Valves, Flanges and Fittings and Other Piping
Components, Radiographic Examination Method
MSS SP-55 (2001) Quality Standard for Valves, Flanges, and

Fittings and Other Piping Components, Visual
Examination Method
MSS SP-58 (2002) Pipe Hangers and Supports - Materials,

Design and Manufacture
MSS SP-61 (2003) Pressure Testing of Steel Valves
MSS SP-67 (2002) Butterfly Valves
MSS SP-69 (2002) Pipe Hangers and Supports - Selection and

Application
MSS SP-70 (1998) Cast Iron Gate Valves, Flanged and Threaded
Ends
MSS SP-71 (1997) Gray Iron Swing Check Valves, Flanged and
Page 60
Threaded Ends
MSS SP-72 (1999) Ball Valves with Flanged or Butt-Welding

Ends for General Service
MSS SP-80 (2003) Bronze Gate, Globe, Angle and Check Valves
MSS SP-83 (2001) Steel Pipe Unions Socket Welding and Threaded
MSS SP-84 (1990) Valves - Socket Welding and Threaded Ends
MSS SP-85 (2002) Cast Iron Globe and Angle Valves Flanged and
Threaded Ends
MSS SP-86 (2002) Guidelines for Metric Data in Standards for

Valves, Flanges, Fittings and Actuators
MARBLE INSTITUTE OF AMERICA (MIA)
MIA Design Manual (2003) Dimensional Stone Design Manual
MASTER PAINTERS INSTITUTE (MPI)
MPI (2002) Architectural Painting Specification Manual
METAL BUILDING MANUFACTURERS ASSOCIATION (MBMA)
MBMA Low Rise Manual (1986; Errata; Supple 1990) Low Rise Building
Systems Manual
MIDWEST ROOFING CONTRACTORS ASSOCIATION (MRCA)
CERTA (2003) NRCA/MRCA Certified Roofing Torch Applicator

Program
MONORAIL MANUFACTURERS ASSOCIATION (MMA)
MMA MH27.1 (2003) Underhung Cranes and Monorail Systems
NACE INTERNATIONAL (NACE)
NACE RP0169 (2002) Control of External Corrosion on Underground

or Submerged Metallic Piping Systems
NACE RP0190 (1990) External Protective Coatings for Joints,

Fittings and Valves on Metallic Underground or
Submerged Pipelines and Piping Systems
NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)
NASA NPG 8621.1 (2004) NASA Mishap Reporting, Investigating and

Record Keeping Policy
NASA NPG 8715.3 (2000) NASA Safety Manual
NASA NSS 1740.12 (1993) NASA Safety Standard For Explosives,
Page 61
Propellants and Pyrotechnics
RCBEA 2.63 (2004) Tank and Storage Tank Unpressurized
NATIONAL ASSOCIATION OF ARCHITECTURAL METAL MANUFACTURERS (NAAMM)
NAAMM MBG 531 (1988; MBG 531S-89) Metal Bar Grating Manual
NATIONAL BOARD OF BOILER AND PRESSURE VESSEL INSPECTORS (NBBPVI)
NBBPVI NB-23 (2001) National Board Inspection Code
NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION (NEMA)
NEMA 107 (1987; R 1993) Methods of Measurement of Radio

Influence Voltage (RIV) of High-Voltage Apparatus
NEMA 250 (2003) Enclosures for Electrical Equipment (1000

Volts Maximum)
NEMA AB 1 (1999) Molded Case Circuit Breakers and Molded Case

Switches
NEMA AB 3 (2001) Molded Case Circuit Breakers and Their

Application
NEMA BU 1 (1999) Busways
NEMA C37.72 (1987) Manually-Operated Dead-Front Padmounted

Switchgear with Load Interrupting Switches and
Separable Connections for Alternating-Current
Systems
NEMA C78.1375 (1996) Electric Lamps - 400-Watt, M59 Single-Ended

Metal Halide Lamps
NEMA C78.1376 (1996) Electric Lamps - 1000-Watt, M47 Single-Ended

Metal Halide Lamps
NEMA C82.1 (1997; R 1992) Ballasts for Fluorescent Lamps
NEMA C82.4 (2002) For Lamp Ballasts - Ballasts for

High-Intensity-Discharge and Low Pressure Sodium
Lamps (Multiple-Supply Type)
NEMA C82.9 (1996; C82.9b) High-Intensity-Discharge and

Low-Pressure Sodium Lamps, Ballasts, and
Transformers - Definitions
NEMA DC 3 (1989; R 1996) Residential Controls - Electrical

Wall-Mounted Room Thermostats
NEMA FB 1 (2001) Fittings, Cast Metal Boxes, and Conduit

Bodies for Conduit and Cable Assemblies
NEMA FB 11 (2000) Plugs, Receptacles, and Cable Connectors of

the Pin and Sleeve Type forHazardous Locations
Page 62
NEMA FU 1 (2002) Low Voltage Cartridge Fuses
NEMA ICS 1 (2000) Industrial Control and Systems: General

Requirements
NEMA ICS 2 (2000) Industrial Control and System: Controllers,

Contractors, and Overload Relays, Rated Not More
Than 2000 Volts AC or 750 Volts DC
NEMA ICS 3 (1993; R 2000) Industrial Control and Systems

Factory Built Assemblies
NEMA ICS 6 (1993) Enclosures for Industrial Control and Systems
NEMA KS 1 (2001) Enclosed and Miscellaneous Distribution

Equipment Switches (600 Volts Maximum)
NEMA LA 1 (1992; R 1999) Surge Arresters
NEMA LD 3 (2000) High-Pressure Decorative Laminates
NEMA MG 1 (2002) Motors and Generators
NEMA OS 1 (1996) Sheet-Steel Outlet Boxes, Device Boxes,

Covers, and Box Supports
NEMA OS 2 (1996) Nonmetallic Outlet Boxes, Device Boxes,

Covers and Box Supports
NEMA PB 1 (2000) Panelboards
NEMA RN 1 (1998) Polyvinyl-Chloride (PVC) Externally Coated

Galvanized Rigid Steel Conduit and Intermediate
Metal Conduit
NEMA SG 2 (1993) High-Voltage Fuses
NEMA SG 5 (1995) Power Switchgear Assemblies
NEMA SG 6 (2000) Power Switching Equipment
NEMA ST 1 (1988) Specialty Transformers (Except General

Purpose Type)
NEMA ST 20 (1992; R 1997) Dry Type Transformers for General

Applications
NEMA TC 13 (2000) Electrical Nonmetallic Tubing (ENT)
NEMA TC 2 (2003) Electrical Plastic Tubing (EPT) and Conduit

(EPC-40 and EPC-80)
NEMA TC 3 (2004) PVC Fittings for Use With Rigid PVC Conduit
and Tubing
NEMA VE 1 (2002) Metallic Cable Tray Systems
Page 63
NEMA WC 2 (1980; R 1985) Steel Armor and Associated Coverings
for Impregnated-Paper-Insulated Cables (ICEA
S-67-401)
NEMA WC 3 (1992) Rubber-insulated Wire and Cable for the

Transmission and Distribution of Electrical Energy
(ICEA S-19-81)
NEMA WC 4 (1988) Varnished-Cloth-Insulated Wire and Cable for

the Transmission and Distribution of Electrical
Energy (ICEA S-65-375)
NEMA WC 5 (1992; R 1993) Thermoplastic-Insulated Wire and

Cable for the Transmission and Distribution of
Electrical Energy
NEMA WC 7 (1988) Cross-linked

Thermosetting-Polyethylene-Insulated Wire and Cable
for the Transmission and Distribution of Electrical
Energy (ICEA S-66-524)
NEMA WC 8 (1993) Ethylene-Propylene-Rubber-Insulated Wire and

Cable for the Transmission and Distribution of
Electrical Energy (ICEA S-68-516)
NEMA WD 1 (1999) General Requirements for Wiring Devices
NEMA WD 6 (2002) Wiring Devices - Dimensional Requirements
NATIONAL ENVIRONMENTAL BALANCING BUREAU (NEBB)
NEBB Procedural Standards

(1994) Procedural Standards for Measuring Sound and
Vibration
NEBB TABES (1998) Procedural Standards for Testing, Adjusting

and Balancing of Environmental Systems
NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)
NFPA 1 (2003) Uniform Fire Code
NFPA 10 (2002) Standard for Portable Fire Extinguishers
NFPA 101 (2003) Life Safety Code (National Fire Codes, Vol 5)
NFPA 110 (2002) Emergency and Standby Power Systems
NFPA 12 (2000) Standard on Carbon Dioxide Extinguishing

Systems
NFPA 13 (2002) Installation of Sprinkler Systems
NFPA 13E (2000) Fire Department Operations in Properties

Protected by Sprinkler and Standpipe Systems
NFPA 14 (2003) the Installation of Standpipe and Hose
Page 64
Systems
NFPA 1961 (2002) Fire Hose
NFPA 1963 (2003) Fire Hose Connections
NFPA 220 (1999) Standard on Types of Building Construction
NFPA 24 (2002) Standard for the Installation of Private

Fire Service Mains and Their Appurtenances
NFPA 241 (2000) Safeguarding Construction, Alteration, and

Demolition Operations
NFPA 252 (2003) Standard Methods of Fire Tests of Door

Assemblies
NFPA 253 (2000) Standard Method of Test for Critical Radiant

Flux of Floor Covering Systems Using a Radiant Heat
Energy Source
NFPA 255 (2000) Standard Method of Test of Surface Burning

Characteristics of Building Materials
NFPA 258 (2001) Recommended Practice for Determining Smoke

Generation of Solid Materials
NFPA 291 (2002) Fire Flow Testing and Marking of Hydrants
NFPA 303 Fire Protection Standards for Marinas and Boatyards
NFPA 385 (2000) Standard for Tank Vehicles for Flammable and
Combustible Liquids
NFPA 409 (2004) Standard on Aircraft Hangers
NFPA 418 (2001) Standard for Heliports
NFPA 505 (2002) Fire Safety Standard for Powered Industrial

Trucks Including Type Designations, Areas of Use,
Conversions, Maintenance, and Operations
NFPA 54 (2002) National Fuel Gas Code
NFPA 58 (2004) Liquefied Petroleum Gas Code
NFPA 70 (2005) National Electrical Code 2005 Edition
NFPA 72 (2002) National Fire Alarm Code
NFPA 780 (2000) Standard for the Installation of Lightning

Protection Systems
NFPA 80 (1999) Standard for Fire Doors and Fire Windows
NFPA 90A (2002) Standard for the Installation of Air
Page 65
Conditioning and Ventilating Systems
NFPA 99 (2000) Standard for Health Care Facilities
NFPA IFH CH14 (1990) Wood Products (Industrial Fire Hazards

Handbook)
NATIONAL FOREST PRODUCTS ASSOCIATION (NFOPA)
NFOPA-03 (1998) Manual for House Framing
NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY (NIST)
NIST PS 1 (1995) Construction and Industrial Plywood
NIST PS 15 (1975) Custom Contact-Molded Reinforced-Polyester

Chemical Resistant Process Equipment
NIST PS 20 (1999) American Softwood Lumber Standards
NIST PS 56 (1973) Structural Glued Laminated Timber
NIST PS 58 (1973) Basic Hardboard
NATIONAL ROOFING CONTRACTORS ASSOCIATION (NRCA)
NRCA Details (2003) NRCA Roof Perimeter Flashing Systems

Construction Details for Class 1 Roof Construction
NRCA Manual (2003) NRCA Roofing and Waterproofing Manual (2

vol.)
NSF INTERNATIONAL (NSF)
NSF 14 (2003) Plastics Piping Components and Related

Materials
PIPE FABRICATION INSTITUTE (PFI)
PFI ES 1 (1992) Internal Machining and Solid Machined

Backing Rings for Circumferential Butt Welds
PFI ES 11 (2003) Permanent Marking of Piping Materials
PFI ES 21 (1992; R 1995) Internal Machining and Fit-up of

GTAW Root Pass Circumferential Butt Welds
PFI ES 3 (2001) Fabricating Tolerances
PFI ES 31 (1992) Standard for Protection of Ends of

Fabricated Piping Assemblies
PFI ES 35 (1993) Nonsymmetrical Bevels and Joint

Configurations for Butt Welds
PFI ES 7 (1994) Minimum Length and Spacing for Welded Nozzles
Page 66
PFI TB1 (1994) Pressure Temperature Ratings of Seamless
Pipe Used in Power Plant Piping Systems
PLASTICS PIPE INSTITUTE (PPI)
PPI TN2 (1970) Sealants for Polyvinyl Chloride (PVC)

Plastic Piping
PLUMBING AND DRAINAGE INSTITUTE (PDI)
PDI WH 201 (1988) Water Hammer Arrestors Standard
PORCELAIN ENAMEL INSTITUTE (PEI)
PEI 1001 (1996) Architectural Porcelain Enamel (ALS-100)
PEI CG-3 (1985) Color Guide for Architectural Porcelain

Enamel
PRECAST/PRESTRESSED CONCRETE INSTITUTE (PCI)
PCI Mnl-116 (1999) Manual for Quality Control for Plants and
Production of Precast and Prestressed Concrete
Products (3rd Edition)
REDWOOD INSPECTION SERVICE (RIS)
RIS Grade Use (1998) Grades of California Redwood Lumber
RUBBER MANUFACTURERS ASSOCIATION (RMA)
RMA IP-20 (1988) Classical V-Belts and Sheaves
RMA IP-22 (1983) Drives Using Narrow Multiple V-Belts (3V,

5V, and 8V Cross Sections)
SCIENTIFIC APPARATUS MAKERS ASSOCIATION (SAMA)
SAMA LF6a (1978) Laboratory and Hospital Service Fittings
SEMICONDUCTOR EQUIPMENT AND MATERIALS INTERNATIONAL (SEMI)
SEMI C28-0301 (1999) Hydrofluoric Acid
SEMI C35-0301 (1999) Nitric Acid
SHEET METAL & AIR CONDITIONING CONTRACTORS' NATIONAL ASSOCIATION

(SMACNA)
ASM MANUAL (1993; Errata; Addenda 1997; 4th Edition 1999)

Architectural Sheet Metal Manual
SMACNA 1117 (2003) Fibrous Glass Duct Construction Standard
SMACNA 1143 (1985) HVAC Air Duct Leakage Test Manual
Page 67
SMACNA 1481 (1995; 6th Ed) HVAC Duct Construction Standards -
Metal and Flexible
SMACNA 1650 (1998) Seismic Restraint Manual: Guidelines for

Mechanical Systems
SMACNA 1741 (2000) HVAC Duct Systems Inspection Guide
SMACNA 1793 (2003) Architectural Sheet Metal Guideline
SMACNA TAB HVAC SYSTEMS (2002) HVAC Systems - Testing, Adjusting and
Balancing
SOCIETY OF AUTOMOTIVE ENGINEERS INTERNATIONAL (SAE)
SAE AMS 2480 (2001) Phosphate Treatment, Paint Base
SAE AMS 3110 (2001) Primer, Zinc Chromate
SAE AMS 3777A (1991) Tape, Nylon, Nonmelting, Reinforcing
SAE AMS 3779 (1990) Tape Adhesive, Pressure Sensitive Thermal

Radiation Resistant
SAE AMS 3779/1A (1990; R 1994) Tape, Adhesive, Pressure-Sensitive

Thermal Radiation Resistant, Aluminum Foil/Glass
Cloth
SAE J513 (1999) Refrigeration Tube Fittings - General

Specifications Standards
SAE J636 (2001) V-Belts and Pulleys, Standard
SOUTHERN PINE INSPECTION BUREAU (SPIB)
SPIB 1003 (2002) Grading Rules
STEEL DOOR INSTITUTE (SDI)
SDI 100 (1998) Standard Steel Doors and Frames
SDI 105 (1991) Erection Instructions for Steel Frames
STEEL JOIST INSTITUTE (SJI)
SJI Specs & Tables (2002) Load Tables and Weight Tables for Steel
Joists and Joist Girders
STEEL WINDOW INSTITUTE (SWI)
SWI-SWS (1990) Steel Windows Specifications
TECHNICAL MANUAL (TM)
TM 5-848-1 (1991) Gas Distribution (AFM 88-12, Ch. 1)
Page 68
THE SOCIETY FOR PROTECTIVE COATINGS (SSPC)
SSPC A (2000) Good Painting Practice Steel Structures

Painting Manual, Volume 1
SSPC AB-1 (2000) Mineral and Slag Abrasives
SSPC PS 14.01 (2000) Steel Joist Shop Painting System
SSPC Paint 101 (1982) Aluminum Alkyd Paint Leafing (Type I) and
Non-Leafing (Type II)
SSPC Paint 102 (1982) Black Alkyd Paint
SSPC Paint 12 (1982) Paint Specification No. 12 Cold-Applied

Asphalt Mastic (Extra Thick Film)
SSPC Paint 15 (1999) Steel Joist Shop Primer
SSPC Paint 20 (2000) Zinc-Rich Primers (Type I - Inorganic and

Type II - Organic)
SSPC Paint 25 (1997) Paint Specification No. 25, Red Iron Oxide,
Zinc Chromate, Raw Linseed Oil and Alkyd Primer
(Without Lead and Chromate Pigments)
SSPC Paint 27 (2000e1) Basic Zinc Chromate - Vinyl Butyral Wash

Primer
SSPC SP 1 (2000e1) Solvent Cleaning
SSPC SP 10 (2000) Joint Surface Preparation, Standard

Near-White Metal Blast Cleaning (NACE No. 2)
SSPC SP 3 (2000e1) Power Tool Cleaning
SSPC SP 5 (2000) White Metal Blast Cleaning (NACE-No. 1)
SSPC SP 6 (2000) Surface Preparation Specification No. 6 -

Commercial Blast Cleaning
SSPC SP 7 (2000) Brush-Off Blast Cleaning (NACE-No. 4)
SSPC-01 (1993; 3rd Ed) Good Painting Practice Steel

Structures Painting Manual, Volume 1
U.S. AIR FORCE TECHNICAL ORDERS (TO)
TO 31-10-27 (1994; CHG 3 1983) Standard Institutional

Practices, Equipment Designations
TO 31W3-10-15 (1980; CHG 3 1982) Outside Plant Cable Testing
U.S. ARMY CORPS OF ENGINEERS (USACE)
COE EM-385-1-1 (1996) U.S. Army Corps of Engineers Safety and
Page 69
Health Requirements Manual
U.S. DEPARTMENT OF DEFENSE (DOD)
MIL-HDBK 232 (Rev A) Red/Black Engineering Installation

Guidelines
MIL-STD 101B (1970) Color Code For Pipelines and For Compressed
Gas Cylinders
MIL-STD 282 (Notice 3) Filter Units, Protective Clothing,

Gas-Mask Components, and Related Products:
Performance-Test Methods
MIL-STD 410 (Rev E; 1991) Nondestructive Testing Personnel

Qualification and Certification (Eddy Current,
Liquid Penetrant, Magnetic Particle, Radiographic
and Ultrasonic)
MIL-STD 461 (Rev E; 1999) Electromagnetic Emission and

Susceptibility Requirements for the Control of
Electromagnetic Interference
MIL-STD 462 (Rev D; 1993) Measurement of Electromagnetic

Interference Characteristics
MIL-STD 810 (Rev F; 2000) Department of Defense Test Method

Standard for Environmental Engineering
Considerations and Laboratory Tests
MIL-STD 889 (Rev B, Notice 2) Dissimilar Metals
MS DOD-G-24508 (1998d) Grease, High Performance, Multipurpose

(Metric)
MS DOD-P-15328 (1999d) Primer (Wash), Pretreatment (Formula No.

117 For Metals) (Metric)
MS MIL-A-24179 (1987a) Adhesive, Flexible Unicellular-Plastic

Thermal Insulation
MS MIL-A-3316 (1990c) Adhesives, Fire-Resistant, Thermal

Insulation
MS MIL-A-8625 (2003f) Anodic Coatings, for Aluminum and Aluminum

Alloys
MS MIL-B-17452 (1998e) Boilers, Steam and Hot Water, Firetube,

Scotch Packaged Type
MS MIL-B-18796 (1998f) Burners, Single: Oil, Gas, and Gas-Oil

Combination for Packaged Boilers
MS MIL-C-13777/GEN (2003g) Cable, Special Purpose, Electrical, 2.3 and

4 Conducters
MS MIL-C-17/28 (2001c) Cables, Radio Frequency, Flexible, Coaxial,
Page 70
50 Ohms, M17/028-RG058
MS MIL-C-17/75 (2003f) Cables, Radio Frequency, Flexible, Coaxial,

50 Ohms, M17/75-RG214 and M17/75-RG365
MS MIL-C-17/GEN (Rev G; Supple 1) Cables, Radio Frequency, Flexible

and Semirigid
MS MIL-C-18480 (1987b) Coating Compound, Bituminous, Solvent,

Coal-Tar Base
MS MIL-C-22750 (1992e) Coating, Epoxy, High Solids
MS MIL-C-22751 (Rev D; Notice 1) Coating System, Epoxy-Polyamide,

Chemical and Solvent Resistant, Process for
Application of
MS MIL-C-22931/11 (2001a) Cables, Radio Frequency, Semirigid,

Coaxial, Semi-Air-Dielectric, 0.875 to 1.005 Inches
Outside Diameter, 50 Ohms
MS MIL-C-22931/13 (2003a) Cables, Radio Frequency, Semirigid,

Coaxial, Semi-Air-Dielectric, 1.625 to 1.830 Inches
Outside Diameter, 50 Ohms
MS MIL-C-28546 (Rev A; Am 2) Cranes, Overhead Traveling,

Underhung, Electric Powered
MS MIL-C-6183 (1998b) Cork and Rubber Composition Sheet; for

Aromatic Fuel- and Oil-Resistant Gaskets
MS MIL-C-9660 (Rev A; Am 3) Cables, Composite Telephone and

Television (16 AWG, Video Pair Polythylene
Insulated and 19 AWG, Paper Insulated, Lead
Covered, and Tape Armored)
MS MIL-E-15090 (1984c) Enamel, Equipment, Light-Gray (Formula No.

111)
MS MIL-E-15145 (Rev C; Am 1) Enamel, Zinc Dust Pigmented, Fresh

Water Tank Protective, Formula No. 102
MS MIL-E-17813 (1992f) Expansion Joints, Pipe, Metallic Bellows
MS MIL-F-1183 (1987j) Fittings, Pipe, Cast Bronze,

Silver-Brazing, General Specification for
MS MIL-F-18280 (1995f) Fittings, Flareless Tube, Fluid Connection
MS MIL-F-29177 (1985a) Filter, Air-Extended Area, Initial

Installation
MS MIL-F-3922 (1977b) Flanges Waveguide, General Purpose
MS MIL-F-51079 (1998d) Filter Medium, Fire-Resistant,

High-Efficiency
Page 71
MS MIL-H-2813 (1994b) Hoists, Chain and Wire Rope, Pneumatic
MS MIL-H-904 (Rev H; Am 2) Hoists, Chain, Hand Operated, Hook

and Trolley Suspension
MS MIL-I-1361 (1991c) Instrument Auxiliaries, Electrical

Measuring; Shunts, Resistors, and Transformers
MS MIL-I-631 (1987d) Insulation, Electrical, Synthetic-Resin

Composition, Nonrigid
MS MIL-L-19140 (1997e) Lumber and Plywood, Fire-Retardant Treated
MS MIL-L-25567 (1993d) Leak Detection Compound, Oxygen Systems

(Metric)
MS MIL-L-3150 (1986c) Lubricating Oil, Preservative, Medium
MS MIL-P-23377 (1989f) Primer Coatings: Epoxy, Chemical and

Solvent Resistant
MS MIL-P-26915 (1992c) Primer Coating, Zinc Dust Pigmented, for

Steel Surfaces
MS MIL-P-28578 (1998b) Paint, Water-Borne, Acrylic or Modified

Acrylic, Semi-Gloss, for Metal Surfaces
MS MIL-R-3065 (2000e) Rubber, Fabricated Products
MS MIL-T-704 (Rev K) Treatment and Painting of Material
MS MIL-V-12003 (Rev F; Am 1) Valves, Plug: Cast-Iron or Steel,

Manually Operated
MS MIL-V-173 (1999c) Varnish, Moisture-and-Fungus Resistant (for

Treatment of Communications, Electronic, and
Associated Equipment)
MS MIL-W-16878/GEN (1994f) Wire, Electrical, Insulated
MS MIL-W-85/GEN (1987g) Waveguide, Rigid, Rectangular
U.S. DEPARTMENT OF ENERGY (DOE)
DOE CE-2 (2000) How to Buy an Energy-Efficient Water-Cooled

Electric Chiller
DOE CE-3 (2001) How to Buy an Energy-Efficient Commercial

Unitary Air Conditioner

Heat Pump

Boiler
DOE CE-6 (2000) How to Buy an Energy-Efficient Air-Cooled
Page 72
Electric Chiller
DOE CI-1 (2001) How to Buy a Premium Energy-Efficient

Electric Motor
DOE CI-2 (2000) How to Buy an Energy-Efficient Distribution

Transformer
DOE LT-1 (2000) How to Buy Energy-Efficient Fluorescent Tube

Lamps
DOE LT-2 (2000) How to Buy Energy-Efficient Fluorescent

Ballasts
DOE LT-3 (2000) How to Buy Energy-Efficient Fluorescent

Luminaires
DOE LT-4 (2000) How to Buy Energy-Efficient Exit Signs
DOE LT-5 (2000) How to Buy Energy-Efficient Compact

Fluorescent Light Bulbs
DOE LT-6 (2000) How to Buy Energy-Efficient Industrial HID

Luminaires
DOE RA-1 (2000) How to Buy an Energy-Efficient Room Air

Conditioner
DOE RE-4 (2000) How to Buy an Energy-Efficient Electric

Water Heater
DOE RE-5 (2000) How to Buy an Energy-Efficient Gas Water

Heater
DOE WS-1 (2000) How to Buy a Water-Saving Faucet
DOE WS-2 (2000) How to Buy a Water-Saving Showerhead
DOE WS-3 (2000) How to Buy a Water-Saving Replacement Toilet
DOE WS-4 (2000) How to Buy a Water-Saving Replacement Urinal
U.S. FEDERAL AVIATION ADMINISTRATION (FAA)
FAA AC 150/5300-13 (1997) Airport Design
FAA AC 70/7460-1 (Rev K; Change 1) Obstruction Marking and Lighting
U.S. FEDERAL COMMUNICATIONS COMMISSION (FCC)
FCC Part 18 RF Lighting Devices
U.S. GENERAL SERVICES ADMINISTRATION (GSA)
CID A-A-60003 (Basic) Partitions, Toilet, Complete
Page 73
FED-STD 191 (Rev C) Textile Test Methods
FED-STD 209 (Rev C) Clean Room and Work Station Requirements,

Controlled Environment
FED-STD 228 (2000) Cable and Wire, Insulated; Methods of Testing
FED-STD 595 (1994b) Colors Used in Government Procurement
FS A-A-1927 (Rev C) Padlocks
FS A-A-1932 (Rev A) Lockset, Rim
FS A-A-344 (Rev A) Lacquer (Clear Gloss)
FS A-A-50457 (2001a) Valves Radiator, Heating Packless Bonnett,

Class 125 PSIG
FS A-A-52913 Splice Connectors
FS A-A-59214 (2004) Junction Box: Extension, Junction Box;

Cover, Junction Box (Steel, Coated With
Corrosion-Resistant Finish)
FS A-A-8 (Base) Shellac Varnish
FS AA-L-00486 (1993j) Lockers, Clothing, Steel
FS AA-P-00615 (Rev B) Partitions, Office, Steel
FS AA-V-00200 (1973b) Venetian Blinds
FS BB-N-411 (2002c) Nitrogen, Technical
FS CCC-C-700 (2000j) Cloth, Coated, Vinyl Coated (Artificial

Leather)
FS CCC-W-408 (2003d) Wallcovering, Vinyl Coated
FS DDD-C-001799 (Base) Carpet, Squares, Pile Surface, Tile Type,

With or Without Attached Cushion
FS FF-B-171 (Rev A; Am 1) Bearings, Ball, Annular (General

Purpose)
FS FF-B-185 (Am 4) Bearings, Roller, Cylindrical; and Bearings,

Roller, Self and Aligning
FS FF-B-588 (Rev D) Bolt, Toggle; and Expansion Sleeve, Screw
FS FF-H-106 (1974c) Hardware, Builders'; Locks and Door Trim:

General Specification for
FS FF-N-105 (Rev B; Int Am 4) Nails, Brads, Staples, and

Spikes: Wire, Cut, and Wrought
Page 74
FS FF-S-325 (Int Amd 3) Shield, Expansion; Nail, Expansion; and
Nail, Drive Screw (Devices, Anchoring, Masonry)
FS FF-W-84 (Rev A; Am 3) Washers, Lock (Spring)
FS HH-B-100 (Rev B) Barrier Material Vapor (for Pipe, Duct, and

Equipment Thermal, Insulation)
FS HH-I-558 (Rev C) Insulation, Blocks, Boards, Blankets,

Felts, Sleeving (Pipe and Tube Covering), and Pipe
Fitting Covering, Thermal (Mineral Fiber,
Industrial Type)
FS L-C-530 (Rev C) Coating, Pipe, Thermoplastic Resin
FS L-F-475 (1998) Floor Covering Vinyl, Surface (Tile and

Roll), With Backing
FS LLL-B-810 (Rev B) Building Board, (Hardboard) Hard Pressed,

Vegetable Fiber
FS MM-L-736 (1983c) Lumber; Hardwood
FS MM-L-751 (Rev H) Lumber; Softwood
FS MMM-A-001993 (1978) Adhesive, Epoxy, Flexible, Filled (For

Binding, Sealing, and Grouting)
FS MMM-A-130 (Rev B; Int Am 3) Adhesive, Contact
FS MMM-A-181 (Rev D) Adhesives, Phenol, Resorcinol, or Melamine

Base
FS QQ-B-654 (Rev A; Notice 1) Brazing Alloys, Silver
FS QQ-C-40 (Basic; Am 2) Calking: Lead Wool and Lead Pig
FS RR-C-271 (1995d) Chains and Attachments, Welded and Weldless
FS RR-F-191/3D (2001) Fencing, Wire and Pest, Metal (Chain Link

Fence Posts, Top Rails and Braces) (Detail
Specification)
FS RR-F-621 (Rev E) Frames, Covers, Gratings, Steps, Sump and

Catch Basin, Manhole
FS RR-S-331 (1989d) Shoes: for Wood Piles
FS RR-T-650 (1988d) Treads, Metallic and Non-Metallic, Skid

Resistant
FS RR-W-360 (Rev A) Wire Fabric, Industrial
FS RR-W-410 (2002e) Wire Rope and Strand
FS SS-C-153 (Base-C) Cement, Bituminous, Plastic
Page 75
FS SS-L-30 (Rev D; Int Am 3) Lath and Board Products, Gypsum
FS SS-S-200 (1993e) Sealants, Joint, Two-Component,

Jet-Blast-Resistant, Cold-Applied, for Portland
Cement Concrete Pavement
FS SS-T-312 (Rev B; Notice 1) Tile, Floor; Asphalt, Rubber,

Vinyl, Vinyl-Asbestos
FS SS-W-40 (Rev A; Int Am 1, Notice 1) Wall Base: Rubber, and

Vinyl Plastic
FS TT-C-490 (1990; Am 2) Cleaning Methods for Ferrous Surfaces

and Pretreatments for Organic Coatings
FS TT-C-494 (Rev B; Notice 1) Coating Compound, Bituminous,

Solvent Type, Acid Resistant
FS TT-C-520 (Rev B; Am 1) Coating Compound, Bituminous, Solvent

Type, Underbody (for Motor Vehicles)
FS TT-E-489 (Rev J) Enamel, Alkyd, Gloss, Low Voc Content
FS TT-E-491 (Rev C) Enamel; Gloss, Synthetic (for Metal and

Wood Furniture)
FS TT-F-336 (Rev E) Filler, Wood, Paste
FS TT-P-00791 (Rev B; Am 2) Putty; Linseed-Oil Type, (For

Wood-Sash-Glazing)
FS TT-P-38 (Rev E) Paint, Aluminum, Ready-Mixed
FS TT-P-645 (1990b) Primer, Paint, Zinc-Molybdate, Alkyd Type
FS TT-V-121 (Rev H) Varnish, Spar, Water-Resisting
FS TT-V-51 (Rev F) Varnish: Asphalt
FS TT-W-571 (Rev J) Wood Preservation: Treating Practices
FS TT-W-572 (1990; Am 2) Wood Preservative: Water Repellent
FS UU-B-790 (1992) Building Paper, Vegetable Fiber: (Kraft,

Waterproofed, Water Repellent and Fire Resistant)
FS W-R-550 (Rev A; Notice 1) Rods, Ground (With Attachments)
FS WW-P-401 (Rev E; Am 1) Pipe and Pipe Fittings, Cast-Iron,

Soil
FS WW-P-421 (Rev D) Pipe, Cast, Gray and Ductile Iron, Pressure

(For Water and Other Liquids)
FS WW-P-460 (1994d) Pipe Fittings; Brass or Bronze (Threaded)

125- and 250-Pound
Page 76
FS WW-P-521 (Rev G) Pipe Fittings, Flange Fittings, and
Flanges: Steel and Malleable Iron (Threaded and
Butt-Welding) Class 150
FS WW-P-541 (1990e; Am 1) Plumbing Fixtures
FS WW-P-541/4 (2001b; Am 1) Plumbing Fixtures (Lavatories)
FS WW-P-541/5 (2001b; Am 1) Plumbing Fixtures (Sinks, Kitchen,

Service, and Laundry Trays)
FS WW-P-541/7 (Rev C; Am 1) Plumbing Fixtures (Shower Bath, and

Emergency Eye and Face Wash Outfits)
FS WW-V-35 (Rev C) Valve, Ball
FS ZZ-B-190 (Rev C) Belts, V: Engine Accessory Drive
FS ZZ-H-500 (Rev C) Hose, Rubber, and Hose Assemblies, Rubber:

Pneumatic (Yarn or Fabric Reinforced)
FS ZZ-T-001237 Tread, Stair, Flexible and Semi-Rigid Type Rubber

and Vinyl
QPL-TNT-AP-28 (2004) Paint, Aluminum, Heat Resisting (1200

Degrees F)
SAE-AMS-QQ-C-320 (2000) Chromium Plating (Electrodeposited)
U.S. NATIONAL ARCHIVES AND RECORDS ADMINISTRATION (NARA)
10 CFR 20 (2002) Standards for Protection Against Radiation
21 CFR 1040 (1995) Performance Standards for Light-Emitting

Products
21 CFR 175 (1977) Indirect Food Additives: Adhesives and

Components of Coatings
29 CFR 1910 (2001) Occupational Safety and Health Standards
29 CFR 1910.106 (2003) Flammable and Combustible Liquids
29 CFR 1910.12 (2004) Construction Work
29 CFR 1910.157 (2003) Portable Fire Extinguishers
29 CFR 1926 (2001) Safety and Health Regulations for

Construction
29 CFR 1926.16 (2004) Rules of Construction
30 CFR (1994) Mineral Resources, Chapter 1
36 CFR 1191 Americans with Disabilities Act (ADA) Accessibility

Guidelines for Buildings and Facilities
Page 77
40 CFR 82 (1996) Protection of Stratospheric Ozone
UNDERWRITERS LABORATORIES (UL)
UL 1 (2004) UL Standard for Safety - Flexible Metal

Conduit
UL 1008 (2003) Automatic Transfer Switches
UL 1062 (2001) UL Standard for Safety Unit Substations
UL 1096 (1986; 4th Ed; Rev thru Jan 30, 1988) Electric
Central Air Heating Equipment
UL 10A (2003) UL Standard for Safety Tin-Clad Fire Doors
UL 1242 (2003) UL Standard for Safety - Intermediate Metal

Conduit
UL 125 (2001) UL Standard for Safety Valves for Anhydrous

Ammonia and LP-Gas (Other than Safety Relief)
UL 140 (1997) UL Standard for Safety Relocking Devices for

Safes and Vaults
UL 1479 (2003) UL Standard for Safety Fire Tests of

Through-Penetration Fire Stops
UL 154 (2005) Standards for Carbon Dioxide Fire

Extinguishers
UL 155 (2000) UL Standard for Safety Tests for Fire

Resistance of Vault and File Room Doors
UL 1571 (1992) UL Standard for Safety Incandescent Lighting

Fixtures
UL 1581 (2003) UL Standard for Safety - Reference Standard

for Electrical Wires, Cables, and Flexible Cords
UL 181 (1996; R 2003) Standard Factory-Made Air Ducts and

Air Connectors
UL 20 (2002) General-Use Snap Switches
UL 207 (2001) UL Standard for Safety Refrigerant -

Containing Components and Accessories, Nonelectrical
UL 2129 (2005) Standards for Halocarbon Clean Agent Fire

Extinguishers
UL 25 (2003) UL Standard for Safety Meters for Flammable

and Combustible Liquids and LP Gas
UL 262 (2004) UL Standard for Safety Gate Valves for

Fire-Protection Service
Page 78
UL 268 (2004) UL Standard for Safety Smoke Detectors for
Fire Protective Signaling Systems
UL 299 (2004) Standards for Dry Chemical Fire Extinguishers
UL 303 (1987; 7th Ed; Rev thru April 14, 1995; Bulletin
Jan 9, 1997) UL Standard for Safety Refrigeration
and Air-Conditioning Condensing and Compressor Units
UL 325 (2002) UL Standard Specification for Safety Door,

Drapery, Gate, Louver and Window Operator's and
Systems
UL 38 (2001) UL Standard for Safety Manually Actuated

Signaling Boxes for Use with Fire-Protective
Signaling Systems
UL 464 (2003) UL Standard for Safety Audible Signal

Appliances
UL 465 (1982; 7th Ed; Rev thru Dec 24, 1987) Central
Cooling Air Conditioners
UL 467 (2001) UL Standard for Safety Grounding and Bonding

Equipment
UL 486A-486B (2003; Rev thru Apr 2004) Wire Connectors
UL 486C (2002) UL Standard for Safety Splicing Wire

Connectors
UL 489 (2003; Bulletin Feb 11, 1992; Bulletin Mar 16,

1992) UL Standard for Safety Molded-Case Circuit
Breakers and Circuit-Breaker Enclosures
UL 50 (2003) UL Standard for Safety - Enclosures for

Electrical Equipment
UL 506 (2004) Standard for Specialty Transformers
UL 508 (2003) UL Standard for Safety Industrial Control

Equipment
UL 510 (1998) Insulating Tape
UL 514A (2004) UL Standard for Safety - Metallic Outlet

Boxes
UL 514B (2004) UL Standard for Safety Fittings for Conduit

and Outlet Boxes
UL 536 (2003) UL Standard for Safety Flexible Metallic Hose
UL 555 (2002) UL Standard for Safety Fire Dampers
UL 586 (2000) UL Standard for Safety High-Efficiency

Particulate, Air Filter Units
Page 79
UL 6 (2003) UL Standard for Safety for Electrical Rigid
Metal Conduit-Steel
UL 626 (2005) Standards for 2-1/2 Gallon Stored Pressure,

Water-Type Fire Extinguishers
UL 651 (2002) UL Standard for Safety Schedule 40 and 80

Rigid PVC Conduit
UL 67 (2003) Panelboards
UL 674 (2003) UL Standard for Safety Electric Motors and

Generators for Use in Hazardous (Classified)
Locations
UL 705 (2004) UL Standard for Safety Power Ventilators
UL 723 (2003e9) UL Standard for Safety Test for Surface

Burning Characteristics of Building Materials
UL 726 (2001) UL Standard for Safety Oil-Fired Boiler

Assemblies
UL 768 (1999) UL Standard for Safety Combination Locks
UL 773 (2002) UL Standard for Safety Plug-In, Locking Type

Photocontrols for Use With Area Lighting
UL 790 (2004) Test Methods for Fire Tests of Roof Coverings
UL 795 (1999) Commercial-Industrial Gas Heating Equipment
UL 797 (2003) UL Standard for Safety - Electrical Metallic

Tubing
UL 8 (2005) Standards for Foam Fire Extinguishers
UL 83 (2004) UL Standard for Safety

Thermoplastic-Insulated Wires and Cables
UL 834 (1998) UL Standard for Safety Heating, Water Supply

and Power Boilers - Electric
UL 842 (1999) UL Standard for Safety Valves for Flammable

Fluids
UL 844 (1999; Rev thru Mar 1999) UL Standard for Safety

Electric Lighting Fixtures for Use in Hazardous
(Classified) Locations
UL 845 (2000) UL Standard for Safety Motor Control Centers
UL 854 (2002) UL Standard for Safety Service-Entrance

Cables
UL 857 (2002) UL Standard for Safety Busways and

Associated Fittings
Page 80
UL 860 (2001) UL Standard for Safety Pipe Unions for
Flammable and Combustible Fluids and
Fire-Protection Service
UL 870 (2002) UL Standard for Safety Wireways, Auxiliary

Gutters, and Associated Fittings
UL 8730 (1993) Electrical Controls for Household and

Similar Use
UL 883 (1986; 6th Ed; Rev thru Feb 15, 1989; Errata Apr
24, 1989) UL Standard for Safety Fan-Coil Units and
Room Fan-Heater Units
UL 884 (1998) UL Standard for Safety Underfloor Raceways

and Fittings
UL 900 (1994; Rev thru Oct 1999) Standard for Safety for
Air Filter Units
UL 924 (1995; 8th Ed; Rev thru July 2001) UL Standard for
Safety Emergency Lighting and Power Equipment
UL 935 (2001; 10th Ed) UL Standard for Safety

Fluorescent-Lamp Ballasts
UL 96 (2000) UL Standard for Safety Lightning Protection

Components
UL 96A (2001; 11th Ed) UL Standard for Safety Installation

Requirements for Lightning Protection Systems
UL Bld Mat Dir (2003) Building Materials Directory
UL Elec Const Dir (2003) Electrical Construction Equipment Directory
UL Fire Resist Dir (2003) Fire Resistance Directory
UL RMSD (2004) Roofing Materials and Systems Directory
UL-19 (2001) UL Standard for Lined Fire Hose and Hose

Assemblies
WEST COAST LUMBER INSPECTION BUREAU (WCLIB)
WCLIB Std 17 (1993) Standard Grading Rules for West Coast Lumber
WESTERN WOOD PRODUCTS ASSOCIATION (WWPA)
WWPA-01 (1993) Western Lumber Grading Rules 91
WINDOWS AND DOOR MANUFACTURERS ASSOCIATION (WDMA)
NWWDA I.S. 1 (1999) Wood Flush Doors
NWWDA I.S. 4 (1999) Water Repellent Preservative Treatment for

Millwork
Page 81

Normas

Uploaded by

Copyright:

Available Formats

Normas

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Normas

Uploaded by

Copyright:

Available Formats

What standards are listed for building materials?

What standards are listed for building materials?

What standards are listed for heating, ventilation and air conditioning?

What standards are listed for heating, ventilation and air conditioning?

ACI INTERNATIONAL (ACI)

ACI 117 (1990) Standard Specification for Tolerances for

ACI 211.1 (1997) Standard Practice for Selecting Proportions

ACI 301 (1999) Specifications for Structural Concrete

ACI 302.1R (1996) Guide for Concrete Floor and Slab

ACI 304R (2000) Guide for Measuring, Mixing, Transporting,

ACI 305R (1999) Hot Weather Concreting

ACI 306R (1988) Cold Weather Concreting

ACI 308R (2001) Standard Practice for Curing Concrete

ACI 315 (1999) Details and Detailing of Concrete

ACI 318/318R (2002) Building Code Requirements for Structural

ACI 325.9R (1991) Guide for Construction of Concrete Pavements

ACI 347 (1989) Formwork for Concrete

ACI 347R (2003) Guide to Formwork for Concrete

ACI 503.2 (1992) Standard Specification for Bonding Plastic

ACI 503R (1993) Use of Epoxy Compounds with Concrete

ACI 530.1 (2002) Specification for Masonry Structures

ACI COMP 21 (1993) Elevated Slabs

ACI SP-66 (1994) ACI Detailing Manual

AIR CONDITIONING AND REFRIGERATION INSTITUTE (ARI)

ARI 1010 (2002) Self Contained Mechanically Refrigerated

ARI 210/240 (2003) Unitary Air-Conditioning and Air-Source Heat

ARI 270 (1995) Sound Rating of Outdoor Unitary Equipment

ARI 410 (2001) Forced-Circulation Air-Cooling and

ARI 430 (1999) Central-Station Air-Handling Units

ARI 440 (1998) Room Fan-Coil

ARI 450 (1999) Water-Cooled Refrigerant Condensers, Remote

ARI 460 (2000) Remote Mechanical - Draft Air-Cooled,

ARI 480 (2001) Refrigerant-Cooled Liquid Coolers, Remote

ARI 495 (1999) Refrigerant Liquid Receivers

ARI 520 (1997) Positive Displacement Condensing Units

ARI 550/590 (1998) Water-Chilling Packages Using the Vapor

ARI 620 (1996) Self Contained Humidifiers for Residential

ARI 880 (1998) Air Terminals

AIR DIFFUSION COUNCIL (ADC)

ADC 1062:GRD (2000) Test Codes for Grilles, Registers, and

ADC-01 (2001) Directory of ADC Certified Products

AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL (AMCA)

AMCA 210 (1999) Laboratory Methods of Testing Fans for Rating

AMCA 211 (1994) Certified Ratings Program - Air Performance

AMCA 300 (1996) Reverberant Room Method for Sound Testing of

AMCA 301 (1990) Methods for Calculating Fan Sound Ratings

AMCA 302 (1998) Application of Sone Ratings

AMCA 500 (1999) Test Methods for Louvers, Dampers and

AMCA 99 (1991; AMCA 99-0401) Standards Handbook

AA 45 (2003) Designation System for Aluminum Finishes

AA ASD1 (2003) Aluminum Standards and Data

AA DAF-45 (1997) Designation System for Aluminum Finishes

AA SAS-30 (1996) Specifications for Aluminum Structures

AMERICAN ARCHITECTURAL MANUFACTURERS ASSOCIATION (AAMA)

AAMA 101 (1999) Voluntary Guide Specifications for Aluminum

AAMA 701 (1992) Voluntary Specification for Pile Weather

AAMA 800 (1992) Voluntary Specifications and Test Methods

AAMA 902 (1992) Voluntary Specification for Sash Balances

AAMA WSG.1 (1995) Window Selection Guide