StandardNumber ACI 104,1982(Part 1) ACI 116,2000(Part 1) ACI 117,1990(Part 1) ACI 121,1998(Part 1) ACI 122,2002(Part 1) ACI 124,1994(Part 1) ACI 126,1999(Part

1) ACI 201,1992(Part 1) ACI 207,1996(Part 1) ACI 209,1992(Part 1) ACI 210, 1993(Part 1) ACI 211, 1991(Part 1) ACI 212, 1999(Part 1) ACI 213, 1999(Part 1) ACI 214, 2002(Part 1) ACI 215, 1992(Part 1) ACI 216, 1989(Part 1) ACI 221, 1996(Part 1) ACI 222, 2001(Part 1) ACI 223, 1998(Part 1) ACI 224, 2001(Part 2) ACI 224R, 2001 ACI 225, 1999(Part 2) ACI 228, 1995(Part 2) ACI 229, 1999(Part 2) ACI 230, 1990(Part 2) ACI 232, 2000(Part 2) ACI 233, 1995(Part 2) ACI 234, 1996(Part 2) ACI 301, 1999(Part 2) ACI 302, 1996(Part 2) ACI 303, 1997(Part 2) ACI 304, 2000(Part 2) ACI 305, 1999(Part 2) ACI 306, 1988(Part 2) ACI 307, 1998(Part 2) ACI 307/307R, 1995 ACI 308, 2001(Part 2) ACI 309, 1996(Part 2) ACI 311 [SP-2(99)], 1999(Part 2) ACI 313, 1997(Part 2) ACI 315, 1999(Part 3) ACI 318, 2002(Part 3) ACI 318R, 1999 ACI 318R, 1999 ACI 318RM, 1995 ACI 325, 1985(Part 3) ACI 330, 2001(Part 3) ACI 332, 1999(Part 3) ACI 334, 1992(Part 3) ACI 336, 2001(Part 3) ACI 340, 1997(Part 3) ACI 340R, 1997 ACI 341, 1997(Part 3) ACI 343, 1995(Part 3) ACI 345, 1991(Part 4) ACI 346, 2001(Part 4) ACI 347, 2001(Part 4) ACI 349, 2001(Part 4) ACI 350, 2001(Part 4) ACI 350/ACI 350R, 2001 ACI 351, 1999(Part 4) ACI 352, 2002(Part 4) ACI 355, 1991(Part 4) ACI 357, 1997(Part 5) ACI 358, 1992(Part 5) ACI 359, 2001(Part 5) ACI 360, 1992(Part 5) ACI 362, 1997(Part 5) ACI 363, 1992(Part 5) ACI 364, 1994(Part 5) ACI 365, 2000(Part 5) ACI 371, 1998(Part 5) ACI 372, 2000(Part 5) ACI 373, 1997(Part 5) ACI 408, 1992(Part 5) ACI 421, 1999(Part 5) ACI 423, 1996(Part 5) ACI 435, 1995(Part 5) ACI 437, 1991(Part 5) ACI 439, 1991(Part 5) ACI 440, 1996(Part 5)

Pub.Year 1982 2000 1990 1998 2002 1994 1999 1982 1996 1992 1993 1982 1999 1987 2002 1992 1989 1996 2001 1998 2001 2001 2001 1995 1999 1990 2000 1995 1996 1999 1996 1997 2000 1999 1999 1998 1995 2001 1996 1999 1997 1999 1999 1999 1999 1995 1985 2001 1999 1992 2001 1997 1997 1997 1995 1991 2001 2001 2001 2001 2002 1999 2002 1999 1997 1992 2001 1992 1997 1992 1994 2000 1998 2000 1997 1992 1999 1996 1995 1991 1991 1996

ACI 441, 1996(Part 5) ACI 445, 1999(Part 5) ACI 446, 1991(Part 5) ACI 503, 1993(Part 5) ACI 504, 1990 (Part 6) ACI 506, 1990 (Part 6) ACI 523, 1990(Part 6) ACI 524, 1993(Part 6) ACI 530, 1999 ACI 530, 2002(Part 6) ACI 533, 1993(Part 6) ACI 543, 2000(Part 6) ACI 544, 1996(Part 6) ACI 546, 1996(Part 6) ACI 548, 1997(Part 6) ACI 549, 1997(Part 6) ACI 550, 1996(Part 6) ACI 551, 1992(Part 6) ACI 555, 2001(Part 6) ACI INDEX,2003 ACI ITG 1, 2001(Part 6) ACI SP-66, 1994 ACI SP-66, 1994

1996 1999 1991 1993 1990 1990 1990 1993 1999 2002 1993 2000 1996 1996 1997 1997 1996 1992 2001 2003 2001 1994 1994

StandardName Preparation of Notation for concrete Cement and Concrete Technology Standard Specifications for Tolerances for Concrete Construction and Material Quality Management System for Concrete Construction Guide to Thermal Properties of Concrete and Masonry Systems The Mercer Mile Buildings Guide to Recemmended Format for concrete in Materials Property Database Guide for Making a Condition Survey of Concrete in Service - ACI 201.1R & Guide to Durable Concrete - ACI 201.2R(2001) Mass Concrete - ACI 207.1R , ACI 207.2R,ACI 207.3R, ACI 207.4R & ACI 207.5R Preparation of Creep, Shrinkage and Temperature Effects in Concrete Structures Erosion of Concrete in Hydraulic Structures & ACI - 210.1R Standard Pratice for Selecting Proportions for Normal,Heavyweight, and Mass Concrete - ACI 211.1, ACI 211.2,ACI 211.3R,ACI 211.4R & ACI 211.5R Chemical Admixtures - ACI 212.3R & ACI - 212.4R Guide for Structural Lightweight aggregate Concrete Evaluation of Strength Test Results of concrete Considerations for Design of Concrete Structures subjected to Fatigue Loading Guide for Determining the Fire Endurance of Concrete Elements & ACI 216.1/TMS 01216.1-97 Guide for Use of Normal Weight and Heavyweight aggregates in Concrete & ACI 221.1R-98 Protection of Metals in Concrete Against Corrosion, ACI 222.1-96 & ACI 222.2R-01 Standard Practice for the Use of Shrinkage-Compensating Concrete Control of Cracking in Concrete Structures, ACI 224.1R,ACI 224.2R & ACI 224.3R Control of cracking in concrete structures, Reported by ACI Committee 224 Guide to Selection and Use of Hydraulic Cements In-Place Methods to Estimate concrete Strength & ACI 228.2R Controlled Low-Strength Materials State-of-the-Art Report on Soil Cement Use of Raw or Processed Natural Pozzolans in Concrete & ACI 232.2R Ground Granulated Blast-Furnace Slag as a Cementitious constituent in Concrete Guide for the Use of silica Fume in concrete Specifications for Structural concrete & ACI 301M & ACI SP-15 : Synopsis Guide for Concrete Floor and Slab Construction Standard Specification for Cast-In-Place Architectural Concrete Guide for Measuring, Mixing, Transporting, and Palcing Concrete & ACI 304.1R,ACI 304.2R, ACI 304.3R,ACI 304.5R & ACI 304.6R Hot Weather Concreting Cold Weather Concreting & ACI 306.1 Designand Construction of Reinforced Concrete Chimneys & ACI 307R Standard practice for the design and construction of reinforced concrete chimneys - ACI 307-95 and commentary - ACI 307R-95 Guide to Curing Concrete & ACI 308.1 Guide for Consolidation of Concrete, ACI 309.1R, ACI 309.2R, ACI 309.3R & ACI 309.5R ACI Manual of Concrete Inspection,ACI 311.4R & ACI 311.5R Standard Practice for Design and Construction of Concrete Silos and Stacking Tubes for Storing Granular Materials & ACI 313R Details and Detailing of concrete Reinforcement & ACI SP-66 Building code Requirements for Structural Concrete, ACI 318M & ACI sp - 71 Building code requirements for structural concrete(ACI 318-99) and commentary (ACI 318R-99) Building code requirements for structural concrete(ACI 318-99) and commentary (ACI 318R-99) Building code requirements for reinforced concrete (ACI 318M-95) and commentary (ACI 318RM-95) Guide for Design of Foundations and Shoulders for Concrete Pavements, ACI 325.6R, ACI 325.9R,ACI 325.10R,ACI 325.11R & ACI 325.12R Guide for Design and Construction of Concrete Parking Lots & ACI 330.1R Guide to Residential Cast-in-Place Concrete Construction-ACI 332R Concrete Shell Structures Practice and Commentary - ACI 334.1R Specification for the Construction of Drilled Piers, ACI 336.2R & ACI 336.3R ACI Design Handbool-Design of Structural Reinforced Concrete elements in Accordance with the Strength Design Method of ACI 318-95-ACI 340R-97/SP - 17 (97) ACI Design Handbook - Design of Structural Reinforced Concrete Elements in Accordance with the Strength Design Method of ACI 318-95 - Publication SP-17(97) Seismic Analysis and Design of Concrete Bridge systems Analysis and Design of Reinforced Concrete Bridge Structures Guide for Concrete Highway Bridge Deck Construction, ACI 345.1R & ACI 345.2R Specification for Cast-in-Place Concrete Pipe Guide for Formwork for Concrete & ACI-SP(4) Code Requirements for Nuclear Safety Related Concrete Structures, ACI 349R, ACI 349.1R, ACI 349.2R & ACI 349.3R Code REquirements for Environmental Engineering Concrete Structures and commentary, ACI 350.1/350.1R, ACI 350.2R & ACI 350.3/350.3R Codes Requirements for Environmental Engineering Concrete Structures Grouting between Foundations and bases for Support of Euipment and Machinery & ACI 351.2R Recommendations for Design of Beam-Column Joints in Monolithic Reinforced Concrete Structures & ACI 352.1R State-of-the-Art Report on Anchorage to Concrete & ACI355.2-01/355.2R-01 Guide for the Design and Construction of Fixed offshore Concrete Structures, ACI 357.1R & ACI 357.2R Analysis and Design of Reinforced and prestressed-Concrete Guideway Structures Code for Concrete Containments Design of Slabs on Grade Guide for the Design of Durable Parking Structures, ACi 362.2R State-of-the-Art Report on High-Strength Concrete & ACI 363.2R Guide for Evaluation of Concrete Structures Prior to Rehabilitation Service-Life Prediction-State-of-the-Art Report Guide for the Anlysis, Design, and Construction of Concrete-Pedestal Water Towers Design and Construction of Circular wire and Strand-Wrapped Prestressed-Concrete Structures Design and Construction of Circular Prestressed concrete Structures with Circumferential Tendons State-of-the-Art Report: Bond under Cyclic Loads & ACI 408.3-01/408.3R-01 Shear Reinforcement for slabs Recommendations for Concrete Members Prestressed with Unbonded Tendons-ACI 423.3R, ACI 423.4R,ACI 423.5R & ACI 423.6/423.6R Control of Deflection in Concrete Structures-ACI 435R, ACI 435.7R & ACI 435.8R Strength Evaluation of Existing Concrete Buildings Mechanical Connections of Reinforcing Bars-ACI 439.3R State-of-the-Art Report on Fiber Reinforced Plastic(FRP) Reinforcement for Concrete Structures, ACI 440.1R & ACI 440.2R

High-Strength Concrete Columns: State of the Art Recent Approaches to Shear Design of Structural Concrete Fracture Mechanics of Concrete: Concepts, Models and Determination of Material Properties - ACI 446.1R & ACI 446.3R Use of Epoxy Compounds with Concrete-ACI 503R, ACI 503.1, ACI 503.2, ACI 503.3, ACI 503.4, ACI 503.5R & ACI 503.6R Guide to Sealing Joints in Concrete Structures Guide to Shotcrete,ACI 506.1R, ACI 506.2R, ACI 506.3R & ACI 506.4R Guide to Precast Cellular Concrete Floor,Roof, and Wall Units Guide to Portland Cement Plastering Building Code Requirements for Masonry Structures Building Code REquirements for Masonry Structures-ACI 530-02/ASCe 5-02/TMS 402-02,ACI 530.1-02/ASCE 6-02/TMS 602-02, ACI 530R-02/ASCE 5-02/TMS 402-02 & ACI 530.1R Guide for Precast Concrete Wall Panels & ACI 533.1R Design, Manufacture, and Installation of Concrete Piles State-of-the-Art Report on Fiber Reinforced Concrete-ACI 544.1R, ACI 544.2R, ACI 544.3R & ACI 544.4R Concrete Repair Guide-ACI 546R & ACI 546.2R Guide for the Use of Polymers in Concrete-ACI 548.1R, ACI 548.2R, ACI 548.4 & ACI 548.5R State-of-the-Art Report on Ferrocement & ACI 549.1R Design Recommendations for Precast Concrete Structures-ACI 550R & ACI 550.1R Tilt-Up Concrete Structures Removal and Reuse of Hardened Concrete ACI Manual of Concrete Practice Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary ACI detailing manual 1994 ACI detailing manual 1994

StandardNumber ANSI/ASCE 7-98, 1998

Pub.Year StandardName 1998 Minimum design loads for buildings and other structures.

StandardNumber TEMA 8 ed, 1999

Pub.Year StandardName 1999 Standards of the Tubular Exchanger Manufacturers Association, with CD-ROM, 1 number

StandardNumber Pub.Year StandardName AEIC CS6, 1996 1996 Specifications for Ethylene Propylene rubber Insulated shielded Power Cables rated 69 KV AEIC CS8, 2000 2000 Specifications forExtruded Dielectric, Shielded Power Cables rated 5 through 46 kV(Ist Edition)

StandardNumber ANSI A112.14.1, 1975 ANSI B133.10, 1981 ANSI B133.11, 1982 ANSI B133.1M, 1983 ANSI B133.4, 1978 ANSI B133.6, 1978 ANSI B133.8, 1977 ANSI B16.11, 2001 ANSI B73.2M, 1991 ANSI S1.13, 1995 ANSI Z244.1, 1982 ANSI Z308.1, 1978 ANSI Z535.1, 1998 ANSI Z88.2, 1992 ANSI/ASME 19.5, Int. Supp., 1971 ANSI/ASME B16.1, 1998 ANSI/ASME B16.34, 1996 ANSI/ASME B16.5, 1996 ANSI/ASME MFC-7M, 1987 ANSI/ASME PTC 11, 1984 ANSI/ASME PTC 12.1, 1978 ANSI/ASME PTC 12.2, 1998 ANSI/ASME PTC 12.3, 1997 ANSI/ASME PTC 18.1, 1978 ANSI/ASME PTC 19.2, 1987 ANSI/ASME PTC 19.2, 1987 ANSI/ASME PTC 19.3, 1974 ANSI/ASME PTC 19.3, 1974 ANSI/ASME PTC 19.7, 1980 ANSI/ASME PTC 19.8, 1974 ANSI/ASME PTC 2, 1980 ANSI/ASME PTC 20.1, 1977 ANSI/ASME PTC 20.2, 1965 ANSI/ASME PTC 20.3, 1974 ANSI/ASME PTC 21, 1991 ANSI/ASME PTC 23, 1986 ANSI/ASME PTC 24, 1976 ANSI/ASME PTC 26, 1962 ANSI/ASME PTC 31, 1974 ANSI/ASME PTC 36, 1985 ANSI/ASME PTC 39.1, 1980 ASME AG1, 1994 ASME B133.9, 1994 ASME B16.10, 1992 ASME B16.12, 1991 ASME B16.20, 1993 ASME B16.21, 1992 ASME B16.25, 1997 ASME B16.28, 1994 ASME B16.3, 1993 ASME B16.36, 1996 ASME B16.4, 1992. ASME B16.42, 1987 ASME B16.47, 1996 ASME B16.9, 1993 ASME B16.9, 1993 ASME B19.1, 1995 ASME B19.3, 1991 ASME B20.1, 2003 ASME B30.10, 1999 ASME B30.16, 1998 ASME B30.17, 1998 ASME B30.2, 1996 ASME B31.1, 2004 ASME B31.2, 1968 ASME B31.3, 1999 ASME B31.4, 1992 ASME B31.5, 1992 ASME B31.8, 1999 ASME B31.9, 1996 ASME B36.10M, 1995 ASME B36.19M, 1985 ASME B96.1, 1993 ASME BPVC VIII, Div 1, 2004 ASME BPVC VIII, Div 2, 1995 ASME BPVC I, 1995 ASME BPVC II, A, 2004 ASME BPVC II, D, 2004 ASME BPVC IX, 1995 ASME BPVC V, 1995 ASME BPVC VII, 1995

Pub.Year 1990 1994 1982 1989 1978 1994 1989 2001 1991 1995 1982 1978 1998 1992 1971 1998 1996 1996 1987 1984 1978 1998 1997 1978 1987 1987 1974 1974 1980 1974 1980 1988 1986 1991 1991 1986 1976 1962 1974 1985 1980 1994 1994 1992 1991 1993 1992 1997 1994 1992 1996 1992 1987 1996 1993 1993 1995 1991 2003 2000 1998 1998 1996 2004 1968 1999 1992 1992 1999 1996 1995 1994 1993 2004 1995 1995 2004 2004 1995 1995 1995

StandardName American National Standard - Backwater valves American National Standard - Procurement standard for gas turbine information to be supplied by user and manufacturer American National Standard - Procurement standard for preparation for shipping and installation American National Standard - Gas turbine terminology Gas turbine control and protection systems American National Standard - Procurement standard for gas turbine ratings and performance American National Standard - Gas turbine installation sound emissions Forged fittings, socket-welding and threaded Specification for vertical in-line centrifugal pumps for chemical process Measurement of sound pressure levels in air - ASA 118-1995 American National Standard for personnel protection - Lockout/ Tagout of energy sources - Minimum safety requirements American National Standard mimimum requirements for industrial unit type first aid kits American National Standard - Safety color code American National Standard for respiratory protection Application : Interim Supplement 19.5 on Instruments and apparatus, Part 2 Fluid meters, 6th edition Cast iron pipe flanges and flanged fitings - An American National Standard Valves - Flanged, threaded and welding end Pipe flanges and flanged fittings NPS 1/2 through NPS 24 Measurement of gas flow by means of critical flow venturi nozzles Fans Closed feedwater heaters, Performance Test Code Code on steam condensing apparatus Dearators, Performance Test Code Pumping mode of pump/ turbines Instruments and apparatus, Part 2, Pressure measurement, Performance Test Code Instruments and apparatus, Part 2 Pressure measurement Instruments and apparatus, Part 3, Temperature measurement, Performance Test Code Instruments and apparatus, Part 3 Temperature measurement Instruments and apparatus, Part 7, Measurement of shaft power, Performance Test Code Instruments and apparatus, Part 8, Measurement of indicated power, Performance Test Code Definitions and values, Performance Test Code Speed and load governing systems for steam turbine-generator units Overspeed trip systems for steam turbine - generator units Pressure control systems used on steam turbine - Generator units Particulate matter collection equipment Atmospheric water cooling equipment Ejectors Speed governing systems for internal combustion engine - generator units Ion exchange equipment, Performance Test Code Measurement of industrial sound Condensate removal devices for steam systems Code on nuclear air and gas treatment Measurement of exhaust emissions from stationary gas turbine engines Face-to-face and end-to-end dimensions of valves Cast iron threaded drainage fittings Metallic gaskets for pipe flangs - Ring-joint, spiral-wound, and jacketed Nonmetallic flat gaskets for pipe flanges Butwelding ends Wrought steel buttwelding short radius elbows and returns Malleable iron threaded fitting American National Standard for Orifice flanges Gray iron threaded fittings Ductile iron pipe flanges and flanged fittings Larger diameter steel flanges : NPS 26 through NPS 60 Factory-made wrought steel buttwelding fittings Factory-made wrought steel buttwelding fittings Safety standard for air compressor systems Safety standard for compressors for process industries Safety standard for conveyors and related equipment Hooks Overhead Hoists (UnderHung) Overhead and Gantry cranes (Top Running bridge, Single Girder, Underhung Hoist) Overhead and Gantry cranes (Top running bridge, Single or Multiple Girder,Top Running Trolley Hoist) Power piping, ASME code for pressure piping, B31 Code for pressure piping, Fuel gas piping Process piping, ASME code for pressure piping, B31 Liquid transportation systems for hydrocarbons, liquid petroleum gas, anhydrous ammonia, and alcohols ASME code for pressure piping, B31, Refrigeration piping with 1994 addenda Gas transmission and distribution piping systems ASME code for pressure piping, B31, Building services piping Welded and seamless wrought steel pipe Stainless steel pipe Welded aluminium-alloy storage tanks 2001 ASME Boiler & pressure vessel code, Div 1 Rules for construction of pressure vessels 1995 ASME Boiler & pressure vessel code, Div 2 Alternated rules - Rules for construction of pressure vessels 1995 ASME Boiler & pressure vessel code, Rules for construction of power boilers 2004 ASME Boiler & pressure vessel code, Div 2 A : Materials_ Ferrous Material Specifications 2004 ASME Boiler & pressure vessel code, Div 2 D : Materials, Properties 1995 ASME Boiler & pressure vessel code, Div 9 Welding and brazing qualifications 1995 ASME Boiler & Pressure Vessel Code, V Nondestructive examination 1995 ASME Boiler & Pressure Vessel Code, VII Recommended guidelines for the care of power boilers

ASME MFC-11M, 1989 ASME MFC-1M, 1991 ASME PTC 10, 1997 ASME PTC 19.1, 1998 ASME PTC 19.11, 1997 ASME PTC 22, 1997 ASME PTC 4, 1998 ASME PTC 4.2, 1969 ASME PTC 4.3, 1968 ASME PTC 4.4, 1981 ASME PTC 46 ASME PTC 46 ASME PTC 6, 1996 ASME PTC 6, Report, 1985 ASME PTC 6A, 1982 ASME PTC 6S Report, 1988 ASME PTC 8.2, 1990 ASME PTC 9, 1970 ASME PTC PM, 1993 ASME TDP-1, 1998 ASME Y14.5M, 1994 ASME-STEAM

1989 1991 1997 1998 1997 1997 1998 1991 1991 1992 1996 1997 1996 1991 1988 1988 1990 1992 1993 1998 1994 1998

Measurement of fluid flow by means of Coriolis mass flowmeters Glossary of terms used in the measurement of fluid flow in pipes Compressors and exhausters Instruments and apparatus, Test uncertainty Instruments and apparatus, Steam and water sampling, conditioning, and analysis in the power cycle Performance test code on gas turbine Fired Steam Generators Coal pulverizers - Supplement to performance test code for steam generating units, PTC 4.1 Air heaters - Supplement to PTC 4.1 Gas turbine heat recovery steam generators Performance test code on overall plant performance Performance test code on overall plant performance Performance test code 6 on steam turbines Guidance for evaluation of measurement uncertainty in performance tests of steam turbines Appendix A to test code for steam turbines - Numerical examples of various turbine calculations Procedures for routine performance tests of steam turbines Centrifugal pumps Displacement compressors, vacuum pumps and blowers Performance monitoring guidelines for steam power plants Recommended practices for the prevention of water damage to steam turbines used for electric power generation Dimensioning and tolerancing _ Engineering drawing and related documentation practices ASME Steam properties for industrial use, based on IAPWS-IF97, with 2 floppies

StandardNumber AMCA 210, 1985 AMCA 99, 1986 ASHRAE 23, 1993 ASHRAE 41.7, 1984(RA 91) ASHRAE 41.8, 1989 ASHRAE 87.1, 1992 ASHRAE 55,1992 ASHRAE 62,2001 ASHRAE 90.1,2001 ASHRAE/IES 90.1 : 1989 ARI 430, 1989 ARI 520, 1997 ARI 710, 1986 ARI 750, 1994 ARI 760, 1994

Pub.Year 1985 1986 1993 1991 1989 1992 1992 2001 2001 1989 1989 1997 1986 1994 1994

StandardName Laboratory methods of testing fans for rotating Standards handbook, Publication 99-86 Methods of testing for rating positive refrigerant compressors and condensing units Standard method for measurement of flow of gas Standard methods of measurement of flow of liquids in pipes using orifice flowmeters Method of testing fan vibration - Blade vibrations and critical speeds Thermal Environmental Conditions for Human Occupancy Ventilation for Acceptance Indoor Air Quality Energy Standard for Buildings Except Low-Rise Residential Buildings, I-P Edition Energy Code for Commercial and High-Rise residential Buildings Standard for central station air handling units Standard for positive displacement condensing units Standard for liquid line driers Standard for thermostatic refrigerant expansion valves Standard for solenoid valves for use with volatile refrigerants

StandardNumber API 2000, 1998 API 1104, 1994 API 12B, 1995 API 12D, 1994 API 12P, 1995 API 15HR, 1995 API 15LR, 1990 API 15LT, 1993 API 1632, 1996 API 510, 1992 API 520, Pt 1, 2000 API 520, Pt 2, 1994 API 526, 1995 API 527, 1991 API 570, 1998 API 598, 1996 API 5L, 2000 API 600, 1997 API 602, 1998 API 603, 2001 API 608, 1995 API 609, 1997 API 610, 1995 API 611, 1997 API 612, 1995 API 614, 1992 API 616, 1998 API 617, 1995 API 618, 1995 API 620, 1996 API 620, 1996 API 650, 1998 API 653, 1995 API 670, 1993 API 674, 1995 API 675, 1994 API 676, 1994 API 6D, 1994 API MPMS-CHAPTER 3;SECTION 1B API RP 17B, 1988 API RP 500, 1997 API RP 521, 1997 API RP 572, 1992 API RP 651, 1997 API RP 652, 1997 API RP540, 1991

Pub.Year 1998 1994 1995 1994 1995 1995 1990 1993 1996 1992 2000 1994 1995 1991 1998 1996 2000 1997 1998 2001 1995 1997 1995 1997 1995 1992 1998 1995 1995 1996 1998 1998 1995 1993 1995 1994 1994 1994 2001 1988 1997 1997 1992 1997 1997 1991

StandardName Venting atmospheric and low-pressure storage tanks : Nonrefrigerated and refrigerated, 5th edition Welding of pipelines and related facilities, 18th edn Specification for bolted tanks for storage of production liquids Specification for field welded tanks for storage of production liquids Specification for fiberglass reinforced plastic tanks Specification for high pressure fiberglass line pipe Specification for low pressure fiberglass line pipe Specification for PVC lined steel tubular goods Cathodic protection of underground petroleum storage tanks and piping systems Pressure vessel inspection code, Maintenance inspection, rating, repair and alteration, 7th edition Sizing, selection and installation of pressure - Relieving devices in refineries, Part 1 Sizing and selection,7th Edition Sizing, selection and installation of pressure_relieving devices in refineries, Part 2 Installation Flanged steel pressure relief valves, 4th edition Seat tightness of pressure relief valves Piping inspection code, Inspection, repair, alteration and rerating of in-service piping systems, 2nd edition Valve inspection and testing, 7th edition Specification for line pipe Steel gate valves - Flanged and butt-welding ends, bolted and pressure seal bonnets Compact steel gate valves - flanged, threaded, welding and extended-body ends,7th edition Corrosion-Resistant, Bolted Bonnet Gate Valves - Flanged and Butt-Welding Ends Metal ball valves - flanged, threaded and welding end Lug-and wafer-type butterfly valves,5th edition Centrifugal pumps for petroleum heavy duty chemical and gas industry services, eigth edition General-Purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services,1997,4th Ed Special purpose steam turbines for petroleum, chemical and gas industry services Lubrication, shaft-sealing and control oil systems for special purpose application, Third edition Gas turbines for refinery services, Fourth edition Centrifugal compressors for petroleum, chemical and gas service industries, sixth edition Reciprocating compressors for petroleum, chemical and gas industry services Design and construction of large, welded, low-pressure storage tanks, Addendum 1, Dec 1996 Design and construction of large, welded, low-pressure storage tanks, Addendum 1,2 & 3, Dec 1998 Welded steel tanks for oil storage, Tenth edition Tank inspection, repair, alteration and reconstruction Vibration, axial position and bearing temperature monitoring systems Positive displacement pumps - reciprocating Positive displacement pumps - controlled volume Positive displacement pumps - rotary, 2nd edn. Specification for pipeline valves (Gate, plug, ball and check valves) Manual of Petroleum Measurement Standards,Chapter 3 - Tank Gauging;Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Autom Recommended practice for flexible pipe Recommended practice for classification of locations for electrical installations at petroleum facilities,2nd Edition Guide for pressure-relieving and depressuring systems,4th edition Inspection of pressure vessels Cathodic protection of aboveground petroleum storage tanks, 2nd edition Lining of aboveground petroleum storage tank bottoms, 2nd edition Electrical installations in petroleum processing plants

StandardNumber ANSI/AWS D1.1, 1996 ANSI/AWS QC1, 1996

Pub.Year 1996 1996 Structural welding code, Steel 1996 Standard for AWS certification of welding inspectors

StandardName

StandardNumber CIA Z6 AS 1170.2, 1989 AS 1243,1982 AS 1675,1986 AS 2067,1984 AS 2184,1985 AS/NZ 1429.2,1998 AS/NZS 1023.1,1985 AS/NZS 1023.3,1973 AS/NZS 1028,1992 AS/NZS 1429.1,2000 AS/NZS 1768,2003 AS/NZS 2053.1-2053.3,2001 AS/NZS 2650,2000 AS/NZS 3000,2000 AS/NZS 3008.1.1,1998 AS/NZS 3008.1.1,1998 AS/NZS 3600,2001 AS/NZS 3947.1,2001 AS/NZS 3947.2,2002 AS/NZS 3947.3,2001,2001 AS/NZS 3947.4.1,2001 AS/NZS 3947.4.2, 2000 AS/NZS 3947.4.3,2000 AS/NZS 3947.5.1,2000 AS/NZS 3947.5.2-5.6,2000 AS/NZS 5000.1,2003 AS/NZS 5000.2,1999

Pub.Year 1988 1989 1982 1986 1984 1985 1998 1985 1973 1992 2000 2003 1982 2000 2000 1998 1998 2000 2001 1982 2001 2001 1982 2000 2000 2000 2003 1999

StandardName Concrete Institute of Australia - RP Reinforcement Detailing Handbook SAA loading code, Pt 2 Wind loads Voltage transformers for measurement and protection Current transformers - Measurement and protection Switchgear assemblies and ancillary equipment for alternating voltages above 1kV Low voltage switchgear and controlgear - Moulded-case circuit-breakers for rated voltages up to and including 600V a.c. and 250V d.c. Electric cables - Polymeric insulated - For working voltages above 19/33 (36)kV upto and including 76/132(145) kV Low voltage switchgear and controlgear - Protection of electric motors - Built-in thermal detectors and associated control units Low voltage switchgear and controlgear - Thermal protection of electric motors - Inherent protectors Power reactors and earthing transformers Electric cables - Polymeric insulated - For working voltages 1.9/3.3(3.6)kV up to and including 19/33 (36) kV Lightning Protection Conduits and fittings for electrical installations - General requirements Common specifications for high-voltage switchgear and controlgear standards Electrical installations Electrical Installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1kV Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV Concrete Structures Low-voltage switchgear and controlgear - General rules Low-voltage switchgear and controlgear - Circuit-breakers Low-voltage switchgear and coontrolgear - Switches, disconnectors, switch-disconnectors and fuse-combination units Low-Voltage switchgear and controlgear - Contactors and motor-starters - Electromechanical contactors and motor-starters Low-voltage switchgear and coontrolgear - Contactors and motor-starters - A.C. semiconductors motor controllers and starters Low-voltage switchgear and controlgear - Contractors and motor-starters - A.C. semiconductor controllers and contactors for non-motor loads Low-voltage switchgear and controlgeaar - Control circuit devices and switching elements - Electromechancical control circuit devices Low-voltage switchgear and controlgeaar - Control circuit devices and switching elements - Proximity switches Electric cables - Polymeric insulated - For workiing voltages up to and including 0.6/1(1.2)kV Electric cables - Polymeric insulated - For workiing voltages up to and including 450/750 V

StandardNumber ASTM 01.01, 2001 ASTM 01.02, 2001 ASTM 01.03, 2001 ASTM 01.04, 2001 ASTM 01.05, 1996 ASTM 01.05, 2001 ASTM 01.06, 1996 ASTM 01.07, 1996 ASTM 02.01, 1995 ASTM 02.02, 1995 ASTM 02.03, 1995 ASTM 02.04, 1995 ASTM 02.05, 1995 ASTM 03.01 ASTM 03.02 ASTM 03.03 ASTM 03.04 ASTM 03.05 ASTM 03.06 ASTM10.01 ASTM10.02 ASTM10.03 ASTM10.04 ASTM10.05 ASTM 14.01, 1998 ASTM 14.02, 1998 ASTM 14.03, 1998 ASTM A472, 1993 ASTM B75, 1995 ASTM C 533, 1995 ASTM C680 ASTM D 4809, 2000 ASTM D1066, 1982 ASTM D1066, 1982 ASTM D1192, 1995 ASTM D1192, 1995 ASTM D2843, 1993 ASTM D2863, 1995 ASTM D2880, 2000 ASTM D3483, 1983 ASTM D3603, 1993 ASTM D3605, 1991 ASTM D4304, 1993 ASTM D4378, 1992 ASTM D4418, 2000 ASTM F1565, 1994 ASTM F855, 1990

Pub.Year 2001 2001 2001 2001 1996 2001 1996 1996 1995 1995 1995 1995 1995 1995 1995 1995 1995 1995 1995 1995 1995 1995 1995 1995 1998 1998 1998 1993 1995 1995 1995 2000 1982 1990 1995 1995 1993 1995 2000 1983 1993 1991 1993 1992 2000 1994 1990

StandardName Annual Book of ASTM Standards, Iron and steel products, Steel - Piping, tubing, fittings Annual Book of ASTM Standards, Iron and steel products, Ferrous castings; ferroalloys Annual Book of ASTM Standards, Iron and steel products, Steel - Plate, sheet, strip, wire Annual Book of ASTM Standards, Iron and steel products, Steel - Structural, reinforcing, pressure vessel, railway Annual Book of ASTM Standards, Iron and steel products, Steel - Bars, forgings, bearings, chain, springs Annual Book of ASTM Standards, Iron and steel products, Steel - Bars, forgings, bearings, chain, springs Annual Book of ASTM Standards, Iron and steel products, Coated steel products Annual Book of ASTM Standards, Iron and steel products, Shipbuilding Annual Book of ASTM Standards,Nonferous Metal Products-Copper and Copper Alloys Annual Book of ASTM Standards,Nonferous Metal Products-Aluminum and Magnesium Alloys Annual Book of ASTM Standards,Nonferous Metal Products-Electrical Conductors Annual Book of ASTM Standards,Nonferous Metal Products-Nickel,Cobalt,Lead,Tin,Zinc,Cadmium,Precious,Reactive, Refractory Metals and Alloys Annual Book of ASTM Standards,Nonferous Metal Products-Metallic and Inorganic Coatings: Metal Powders,Sintered P?M Structural Parts

Annual Book of ASTM Standards, General Methods and instrumentation, Pt 1 Healthcare informatics; computerised systems and chemical and material information Annual Book of ASTM Standards, General Methods and instrumentation, Pt 2 General test methods, nonmetal; chromatography; durability of nonmetalic materials; forensic sciences; Annual Book of ASTM Standards, General Methods and instrumentation, Pt 3 Temperature measurement Standard test methods for heat stability of steam turbine shafts and rotor forgings Standard specification for seamless copper tube Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation Standard Practice for Determination of Heat Gain or Loss and the Surface Temperatures of Insulated Pipe and Equipment Systems by the use of a Computer Program Standard Test Method for Heat of Combustion of Liquid HydroCarbon Fuels by Bomb Calorimeter Standard practice for sampling steam Standard practice for sampling steam Standard specification for equipment for sampling water and steam in closed conduits Standard specification for equipment for sampling water and steam in closed conduits Standard test method for density of smoke from the burning or decomposition of plastics Standard test method for measuring the minimum oxygen concentration to support candle-like combustion of plastic_Oxygen index Standard specification for gas turbine fuel oils Standard test methods for accumulated deposition in a steam generator tube, reapproved 1994 Standard test methods for rust-preventing characteristics of steam turbine oil in the presence of water (horizontal disk method) Standard test methods for trace metals in gas turbine fuels by atomic absorption and flame emission spectroscopy Standard test methods for mineral lubricating oil used in steam or gas turbines Standard test methods for in-service monitoring of mineral turbine oils for steam and gas turbines Standard practice for receipt, storage and handling of fuels for gas turbines, reapproved 1993 Standard test methods for pressure-reducing valves for steam service Standard test methods for temporary grounding systems to be used on de-energised electric power lines and equipment

StandardNumber AWWA C102, 1987 AWWA C105/A21.5, 1993 AWWA C203, 2002 AWWA C205, 1995 AWWA C207, 1994 AWWA C210, 1997 AWWA C213, 1996 AWWA C214, 2000 AWWA C218, 1995 AWWA C502, 1994 AWWA C503, 1997 AWWA C504, 1994 AWWA C507, 1991 AWWA C507, 1991 AWWA C512, 1999 AWWA C550, 1990 AWWA C602, 1995 AWWA C653, 1987 AWWA D100, 1996 AWWA E101, 1988 AWWA C501 AWWA M11, 1989

Pub.Year 1987 1993 2002 1995 1994 1997 1996 2000 1996 1994 1997 1994 1991 1991 1999 1990 1995 1987 1997 1988 1992 1989

StandardName AWWA Standard for painting steel water-storage tanks American National Standard for polyethylene encasement for ductile iron pipe systems AWWA Standard for coal-tar protective coatings and linings for steel water pipelines - enamel and tape - hot applied AWWA Standard for cement-mortar protective lining and coating for steel water pipe - 4 in. (100 mm) and larger - shop applied AWWA Standard for steel pipe flanges for waterworks service - sizes 4 in. through 144 in. -100 mm through 3600 mm AWWA Standard for liquid-epoxy coating systems for the interior and exterior of steel water pipelines AWWA Standard for fusion-bonded epoxy coating for the interior and exterior of steel water pipelines AWWA Standard for tape coating systems for the exterior of steel water pipelines AWWA Standard for coating the exterior of aboveground steel water pipelines and fittings AWWA Standard for dry barrel fire hydrants AWWA Standard for wet barrel fire hydrants AWWA Standard for rubber-seated butterfly valves Ball valves, 6 IN. through 48 IN. (150 mm through 1200 mm) AWWA Standard for ball valves, 6 in. through 48 in. - 150 mm through 1200 mm AWWA Standard for air-release, air/vacuum, and combination air valves for waterworks service AWWA Standard for protective epoxy interior coatings for valves and hydrants AWWA Standard for cement mortar lining of water pipelines in place - 4 in. - 100mm - and larger Disinfection of water treatement plants AWWA Standard for welded steel tanks for water storage AWWA Standard for vertical turbine pumps - Line shaft and submersible type Cast-Iron Sluice Gates Manual of water supply practices, Steel pipe - A guide for design and installation

StandardNumber ANSI/HI 1.1-1.2, 2000 ANSI/HI 1.3, 2000 ANSI/HI 1.4, 2000 ANSI/HI 1.6, 2000 ANSI/HI 11.6, 2001 ANSI/HI 2.1-2.2, 2000 ANSI/HI 2.3, 2000 ANSI/HI 2.4, 2000 ANSI/HI 2.6, 2000 ANSI/HI 3.1-3.5, 2000 ANSI/HI 3.6, 2000 ANSI/HI 4.1-4., 2000 ANSI/HI 5.1-5.6, 2000 ANSI/HI 6.1-6.5, 2000 ANSI/HI 6.6, 2000 ANSI/HI 8.1-8.5, 2000 ANSI/HI 9.1-9.5, 2000 ANSI/HI 9.1-9.5, 2000 ANSI/HI 9.1-9.5, 2000 ANSI/HI 9.6.1, 2000 ANSI/HI 9.6.2, 2001 ANSI/HI 9.6.3, 1997 ANSI/HI 9.6.4, 2000 ANSI/HI 9.6.5, 2000 ANSI/HI 9.8, 1998

Pub.Year 2000 2000 2000 2000 2001 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1997 2000 2000 1998

StandardName American National Standard for Centrifugal pumps for Nomenclature, Definitions American National Standard for Centrifugal pumps for Design and Application American National Standard for Centrifugal pumps for Installation, Operation and Maintenance American National Standard for Centrifugal Pumps Tests American National Standard for Submersible Pump Tests American National Standard for vertical pumps for Nomenclature and definitions American National Standard for Vertical Pumps for Design and Application American National Standard for vertical pumps for Installation, Operation and Maintenance American National Standard for Vertical Pumps Tests American National Standard for Rotary Pumps for Nomenclature,Application and Operation American National Standard for Rotary Pumps Tests American National Standard for Sealless rotary pumps for nomenclature, definitions, application, operation and test American National Standard for Sealess Centrifugal pumps for Nomenclature, Definitions, Application and Operation and Test American National Standard for Reciprocating power pumps for nomenclature, definitions, application and operation American National Standard for Reciprocating pump tests American National Standard for Direct Acting (Steam) pumps for Nomenclature, Definitions, Application and Operation American National Standard for Pumps - General guidelines for types, definitions, application , sound measurement and Decontamination American National Standard for Pumps - General guidelines for types, definitions, application , sound measurement and Decontamination American National Standard for Pumps - General guidelines for types, definitions, application , sound measurement and Decontamination American National Standard for Centrifugal and Vertical Pumps for NPSH Margin American National Standard for Centrifugal and Vertical Pumps for Allowable Nozzle Loads American National Standard for Centrifugal and Vertical Pumps forAllowable Operating Region American National Standard for Centrifugal and Vertical Pumps for Vibration Measurements and Allowable Values American National Standard for Centrifugal and Vertical Pumps for Condition Monitoring American National Standard for Pump Intake Design

StandardNumber Pub.Year StandardName HEI 1998 Standards for power plant heat exchangers,3rd Ed. HEI 2000 Performance standard for liquid ring vacuum pumps, 2nd edition HEI 1988 1988 Steam jet vacuum systems, 4th edition HEI 1995 1995 Steam surface condensers, 9th edn HEI CFH 1998 HEI Standards for closed feedwater heaters, sixth edn. HEI DCB 1995 HEI Standards direct contact barometric and low level condensers, 6th edn. HEI Dearators, 1998 Standards and typical specifications for dearators, 6th edn

StandardNumber BS 1041, 2.1, 1985 BS 1041, 2.2, 1989 BS 1041, 3, 1989 BS 1041, 5, 1989 BS 1041, 7, 1988 BS 1041, Pt 4, 1992 BS 1042, Sec.1.4, 1992 BS 1042, Sec.1.5, 1997 BS 1042, Sec.1.6, 1993 BS 1042, Sec.2.1, 1983 BS 1042, Sec.2.2, 1983 BS 1042, Sec.2.3, 1984 BS 1042, Sec.2.4, 1989 BS 12; 1996 BS 1259, 1958 BS 1490, 1988 BS 159 , 1992 BS 1722-1:1999 BS 1868, 1975 BS 1873, 1975 BS 188, 1977 BS 229, 1957 BS 2594 : 1975 BS 2871, PT 3, 1972 BS 2885, 1974 BS 3100, 1991 BS 381C, 1996 BS 3938, 1973 BS 3941, 1975 BS 4027 ;1996 BS 4-1, 1993 BS 4147, 1980 BS 4190;2001 BS 4211, 1994 BS 4395:Part 2;1969 BS 4429, 1987 BS 4449, 1993 BS 4482;1985 BS 4483;1998 BS 4485, Pt 1, 1969 BS 4485, Pt 2, 1988 BS 4485, Pt 3, 1988 BS 4485, Pt 4, 1988 BS 449:Part 2;1969 BS 4571, 1994 BS 4592-1, 1995 BS 499,Part 1;1991 BS 499,Part 2C;1999 BS 499: Part 1:Supplement :1992 IEV 50(851) :1991 BS 5000, Pt.3, 1980 BS 5308, Pt 1, 1986 BS 5308, PT 2, 1986 BS 5311, 1996 BS 5345, PT 1, 1989 BS 5351, 1986 BS 5352, 1981 BS 5395-1, 2000 BS 5395-3, 1985 BS 5628:Part 1;1992 BS 5628:Part 3; 1985 BS 5628-2, 2000 BS 5950, Part 1, 1990 BS 5950, Part 1, 2000 BS 5950, Part 2, 1992 BS 5950, Part 4, 1994 BS 5950, Part 5, 1987 BS 5950, Part 6, 1995 BS 5950, Part 7, 1992 BS 5950, Part 8, 1990 BS 5950, Part 9, 1994 BS 6073 :Part 1; 1981 BS 6073:Part 2, 1981 BS 6079, 1996 BS 6121, Pt 1, 1989 BS 6134, 1991 BS 6180 , 1999 BS 6360 : 1991 BS 6399:Part 1:1996 BS 6399:Part 2:1997 BS 6399:Part 3:1988 BS 6447, 1984 BS 648;1964

Pub.Year 1985 1989 1989 1989 1988 1992 1992 1997 1992 1983 1983 1984 1989 1996 1958 1988 1992 1999 1975 1975 1977 1957 1975 1972 1974 1991 1996 1973 1982 1996 1993 1980 2001 1994 1969 1987 1997 1985 1998 1969 1988 1988 1996 1969 1994 1995 1991 1999 1992 1980 1986 1986 1996 1989 1986 1981 2000 1985 1992 1985 2000 1990 2000 1992 1994 1987 1995 1992 1990 1994 1981 1981 1996 1989 1991 1999 1991 1996 1997 1988 1984 1964

BS 6651, 1999 BS 6739,1986 BS 6755, Pt 1, 1986 BS 6755, Pt 2, 1987 BS 7354, 1990 BS 7626, 1993 BS 8000 : Part 16, 1997 BS 8000: Part 1, 1989 BS 8000:Part 10, 1995 BS 8000:Part 3, 1989 BS 8000:Part 4, 1989 BS 8000:Section 2.1, 1990 BS 8000:Section 2.2, 1990 BS 8002, 1994 BS 8004, 1986 BS 8005, Part 2, 1987 BS 8005, Part 4, 1987 BS 8007, 1987 BS 8110, Part 2, 1985 BS 8110, Part 3, 1985 BS 8110, Pt 1, 1997 BS 848, PT 1, 1997 BS 848, PT 2, 1985 BS 848, PT 4, 1997 BS 848, PT 5, 1986 BS 848, PT 6, 1989 BS 970, Pt 1, 1996 BS 970, Pt 3, 1991 BS 970, Pt 4, 1970 BS 970, Pt.2, 1988 BS CP 3: CHAPTER V : PART 2 : 1972 BS EN 10257-1 BS EN 12056-3, 2000 BS EN 13397,2002 BS EN 2, 1992 BS EN 50014, 1998 BS EN 593, 1998 BS EN 60298, 1996 BS/EN/ISO 9300, 1995 BS/ISO 15377, 1988 SCI 078, 1990

1999 1986 1986 1987 1990 1993 1997 1989 1995 1989 1989 1990 1990 1994 1986 1987 1987 1987 1985 1985 1997 1997 1985 1997 1986 1989 1996 1991 1970 1988 1972 1998 2000 2002 1992 1998 1998 1996 1995 1998 1990

StandardName Temperature measurement, Pt Expansion thermometers, Sec 2.1 Guide to selection and use of liquid-in-glass thermometers Temperature measurement, Pt Expansion thermometers, sec 2.2 Guide to selection and use of dial-type expansion thermometers Temperature measurement, Pt 3 Guide to selection and use of industrial resistance thermometers Temperature measurement, Pt 5 Guide to selection and use of radation pyrometers Temperature measurement, Pt 8 Guide to selection and use of temperature/ time indicators Temperature measurement, Pt 4 Guide to the selection and use of thermocouples Measurement of fluid flow in closed conduits, Pt 1, Pressure differntial devices, Sec 1.4 Guide to the use of devices specified in Section 1.1 and 1.2, 1992 with amd 8154 Measurement of fluid flow in closed conduits, Pt 1, Pressure differntial devices, Sec 1.5 Guide to the effect of departure from the conditions specified in BS EN ISO 5167-1, 1997, with Measurement of fluid flow in closed conduits, Pt 1, Pressure differntial devices, Sec 1.6 Method of measurement of pulsating fluid flow in a pipe, by means of orifice plates, nozzles or Measurement of fluid flow in closed conduits, Pt 2, Velocity area methods, Sec 2.1 Method usind Pitot static tubes, 1983 Measurement of fluid flow in closed conduits, Pt 2, Velocity area methods, Sec 2.2 Method o fmeasurement of velocity at one point of a conduit cross section, 1983 Measurement of fluid flow in closed conduits, Pt 2, Velocity area methods, Sec 2.3 Methods of flow measurement in swirling or asymmetic flow conditions in circular ducts by means o Measurement of fluid flow in closed conduits, Pt 2, Velocity area methods, Sec 2.4, 1989 Specification for Portland cement Instrinsically safe electrical apparatus and circuits Aluminium and aluminium alloy ingots and castings for general engineering purposes High-voltage busbars and busbar connection Fences - Part 1 : Specification for chain link fences Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries, with amd 6564 Methods for Determination of viscosity of liquids Flameproof enclosure of electrical apparatus Specification for Carbon Steel Welded horizontal cylindrical storage tanks Specification for copper and copper alloys tubes, Pt 3 Tubes and heat exchangers Code for acceptance tests on stationary steam generators of the power station type Specification for steel castings for general engineering purposes Specification for Colours for identification,coding and special purposes Current transformers Voltage transformers Specification for Sulfate-resisting Portland cement Structural steel sections - Part 1 : Specification for hot-rolled sections Bitumen based hot applied coating materials for protecting iron and steel including suitable primers where required ISO metric black hexagon bolts, screws and nuts - specification Specification for Ladders for permanent access to chimneys, other high structures, silos and bins Specification for High Strength friction grip bolts and associated nuts and washers for structural engineering;Part 2 : Higher grade bolts and nuts and general grade washers Rigging screws and tumbuckles for general engineering, lifting purposes and pipe hanger applications Specification for Carbon steel bars for the reinforcement of concrete Cold reduced steel wire for the reinforcement of concrete;Incorporating Amd. no. 1 Steel fabric for the reinforcemnet of concrete Specification for water cooling towers, Pt 1, Glossary of terms, 1969 Specification for water cooling towers, Pt 2, Methods for performance testing, 1988 Specification for water cooling towers, Pt 3, Code of practice for thermal and functional design, 1988 Specification for water cooling towers, Pt 4, Code of practice for structural design and construction, 1996 The use of Structural Steel in Building On-load tap-changers Industrial type metal flooring, walkways and stair treads - Part 1 : Specification for open bar gratings Welding terms and symbols, Part 1 : Glossary for welding,brazing and thermal cutting European Arc Welding Symbols Welding terms and symbols; Part 1. Glossary for welding , brazing and thermal cutting;Supplement. Definitions for electric welding equipment Rotating electrical machines of particular types or for particular applications, Pt 3 Generators to be driven by reciprocating internal combustion engines Instrumentation cables, Pt 1 Specification for polyethylene insulated cables Instrumentation cables, Pt 2 Specification of PVC insulated cables High-voltage alternating-current circuit-breakers Selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosives processing and manufacture), Steel ball valves for the petroleum, petrochemical and allied industries Specification for steel wedge gate, globe and check valves 50 mm and smallerr for the petroleum, petrochemical and allied industries with amds. 5815; 6560 Stairs,ladders and walkways - Part 1 : Code of pratice for the design, construction and maintenance of straight stairs and winders Stairs,ladders and walkways - Part 3 : Code of pratice for the design of industrial type stairs, permanent ladders and walkways Code of practice for Use of Masonry, Part 1 : Structural use of unreinforced masonry Code of practice for Use of Masonry, Part 3 : Materials and components, design and workshop (formerly CP 121:Part 1) Code of practice for the use of masonry-Part 2 : Structural use of reinforced and prestressed masonrt Structural use of steelwork in building, Part 1 Code of practice for design in simple and continuous construction : hot rolled section - with Amendment No.1 AMD 6972 Structural use of steelwork in building, Part 1 Code of practice for design :Rolled and Welded sections Structural use of steelwork in building, Part 2 Specification for materials, fabrication and erection : hot rolled sections\ Structural use of steelwork in building, Part 4 Code of practice for design of composite slabs with profiled steel sheeting Structural use of steelwork in building, Part 5 Code of practice for design of cold formed sections Structural use of steelwork in building, Part 6 Code of practice for design of light guage profiled steel sheeting, , Structural use of steelwork in building, Part 7 Specification for materials and workmanship:cold formed sections Structural use of steelwork in building, Part 8 Code of practice for fire resistant design Structural use of steelwork in building, Part 9 Code of practice for stressed skin design, with amd 8315 and amd 9326 Precast concrete masonry units, Part 1 : Specification for precast concrete masonry units Precast concrete masonry units,Part 2: Method for specifying precast concrete masonry units Guide to project management Mechanical cable glands, Pt 1 Specification for metallic glands Specification for pressure and vacuum switches Barriers in and about buildings - Code of practice Conductors in insulated cables and cords Loading for buildings ;Part 1:Code of practice for dead and imposed loads Loading for buildings;Part 2 : code of practice for wind load Loading for buildings;Part 3 : Code of practice for imposed roof load Absolute and gauge pressure transmitters with electrical outputs Schedule of Weights of Building Materials

Code of practice for protection of structures against lightning British Standard Code of Practice for Instrumentation in process control systems: installation design and practice Testing of valves, Pt 1 Specification for production pressure testing requirements Testing of valves, Pt 2 Specification for fire type testing requirements Design of high voltage open-terminal stations Current transformers Workmanship on building sites, Part 16 : Code of practice for sealing joints in buildings using sealants (CAWS P22, Z22) Workmanship on building sites, Part 1 : Code of practice for excavation and filling (CAWS D20) Workmanship on building sites, Part 10 : Code of practice for plastering and rendering (CAWS M20,M30) Workmanship on building sites, Part 2 : Code of practice for masonry (CAWS F10, F30) Workmanship on building sites, Part 4 : Code of practice for waterproofing (CAWS J20, J21, J30, J40, J41) Workmanship on building sites, Part 2 : Code of practice for concrete work-Section 2.1 Mixing and transporting concrete (CAWS E10) Workmanship on building sites, Part 2 : Code of practice for concrete work-Section 2.2 : Sitework with in situ and precast concrete (CAWS E10) Code of practice for earth retaining structures, with amd 1:15 Nov 1995 Foundations (formerly CP 2004) Sewerage, Part 2 Guide to pumping stations and pumping mains Sewerage, Part 4 Guide to design and construction of outfalls Design of concrete structures for retaining aqueous liquids Structural use of concrete, Part 2 Code of practice for special circumstances Structural use of concrete, Part 3 Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns Structural use of concrete, Pt 1 Code of practice fro design and construction Fans for general purpose, Pt 1 Performance testing using standardised airways Fans for general purpose, Pt 2 Methods of noise testing, Incorporating Amd ! Fans for general purpose, Pt 4 Dimensions Fans for general purpose, Pt 5 Guide for mechanical and electrical safety Fans for general purpose, Pt 6 Method of measurement of fan vibration Specification for wrought steels for mechanical and allied engineering purposes, Pt 1 General inspection and testing procedures and specific requirements for carbon, carbon mangan Wrought steel for mechanical and allied engineering purposes, Pt 3 Bright bars for general engineering purposes Wrought steels in the form of blooms, billets, bars and forgings, Pt 4 Valve steels Wrought steels for mechanical and allied engineering purposes, Pt 2 Requirements for steels for the manufacture for hot formed springs Code of Basic data for design of buildings Chapter V. Loading Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 1 : Land Cables Gravity drainage systems inside buildings - Part 3 : Roof drainage,layout and calculation Industrial valves - Diaphgram valves made of metallic materials Classification of fires Electrical apparatus for potentially explosive atmospheres - General requirements Industrial valves - Metallic butterfly valves A.C. metal-enclosed switchgear and controlgear for rated voltages above 1kV and upto and including 52kV Measurement of gas flow by means of critical flow Venturi nozzles Measurement of fluid flow by means of pressure differntial devices_ Guidelines for specificatioin of nozzles and orifice plates beyond the scope of ISO 5157-1 Commentary BS 5950, Part 3: Sec 3.1 Composite beams, ,

StandardNumber Pub.Year StandardName C22.1 HB-02 2002 CE Code Handbook (An Explanation of Rules of the Canadian Electrical Code,Part 1) CSA A23.3,2004 2004 Design of Concrete Structures CSA S16,2001 2001 Limit States Design of Steel Structures

StandardNumber DIN VDE 0207 Pt. 4, 1986 DIN VDE 0207 Pt. 5, 1986 DIN VDE 0815, 1985 DIN VDE 0816,Pt 1, 1988 DIN VDE 0816,Pt 2, 1988 DIN 1943, 1975 DIN 4024, Pt 1, 1988 DIN 4024, Pt 2, 1991 DIN EN 54-2, 1997 DIN V 19250, 1994 DIN V VDE 0801/A1, 1994 DIN VDE 0116, 1989 DIN VDE 016, 1988 DIN VDE 0160A2, 1988 DIN/BSILS 43700, 1982 VDE 0110, PT 1, 1989 VDE 0110, PT 2, 1989 VDE 0110, PT 20, 1990 VDE 0801, 1990

Pub.Year 1986 1986 1985 1988 1988 1975-02 1988 1991 1997 1994 1994 1989 1988 1988 1982 1989 1989 1990 1990

StandardName Insulating and sheathing and compounds for cables and flexible cords PVC insulating and compounds Insulating and sheathing and compounds for cables and flexible cords; PVC sheathing compounds Wiring Cables for telecommunication and information processing systems Outdoor Cables for Telecommunications and Information Processing Systems Cables with Insulation and Sheath of PE of Unit Construction. Outdoor Cables for Telecommunications and Information Processing Systems Signalling and Measuring Cables, Mines Cables Thermal Acceptance Tests of Steam Turbines Machine foundations, Flexible structures that support machines with rotating elements Machine foundations, Rigid foundations for machinery subject to periodic vibration Fire detection and fire alarm systems, Pt 2 Control and indicating equipment Control technology, Basic safety evaluation of measuring and control protective equipment Principles for computers in safety related systems, Amendment A1 Electrical equipment for furnaces Electronic equipment for use in electrical power installations and their assembly into electrical power installations Electronic equipment for use in electrical power installations and their assembly into electrical power installations, Amd 2 Measurement and control, Measuring and control instruments for panel mounting nominal and cut-out dimensions Insulation co-ordination for equipment within low-voltage systems : Fundamental requirements Insulation co-ordination for equipment within low-voltage systems : Dimensioning of clearances and creepage distances Insulation co-ordination for equipment within low-voltage systems : Partial discharge tests application guide Principles for computers in safety related systems

StandardNumber IEC 1000-2-2 IEC 1000-3-3 IEC 1000-4-2, 1995 IEC 1000-4-7 IEC 1024-1 IEC 1024-1-1 IEC 1069, Pt 1, 1991 IEC 1069, Pt 2, 1993 IEC 1131-2, 1992 IEC 1131-4, 1995 IEC 129, 1984 IEC 1334-3-21, 1996 IEC 1597, 1995 IEC 1662, 1995 IEC 1662, 1995 IEC 186, 1987 IEC 214, 1989 IEC 228, 1978 IEC 255, Pt 12, 1980 IEC 255, Pt 13, 1980 IEC 255, Pt 16, 1982 IEC 255, Pt 20, 1984 IEC 255, Pt 23, 1994 IEC 255, Pt 3, 1989 IEC 255, Pt 5, 1977 IEC 255, Pt 6, 1988 IEC 255, Pt 8, 1990 IEC 265-2, 1988 IEC 269-2-1, 1996 IEC 296, 1982 IEC 296, 1982 IEC 298, 1990 IEC 332, Pt 3, 1992 IEC 335, Pt 2-29, 1994 IEC 34, Part 1, 1999 IEC 34, Pt 3, 1988 IEC 34-2, 1972 IEC 34-2, 1972 IEC 34-2, 1972 IEC 34-2A, 1974 IEC 34-4, 1985 IEC 34-4, 1985 IEC 354, 1991 IEC 376, 1971 IEC 376A, 1973 IEC 376B, 1974 IEC 433, 1980 IEC 439-5, 1996 IEC 45-1, 1991 IEC 502, 1994 IEC 521, 1988 IEC 529, 1989 IEC 534, Pt 1, 1987 IEC 534, Pt 2, 1978 IEC 534, Pt 3, 1976 IEC 534, Pt 4, 1982 IEC 534, Pt 5, 1982 IEC 534, Pt 7, 1989 IEC 534, Pt 8-1, 1986 IEC 534, Pt 8-2, 1991 IEC 534, Pt 8-3, 1995 IEC 534, Pt8-4, 1994 IEC 542, 1976 IEC 60076-1,1999 IEC 60076-11,2004 IEC 60076-3,2000 IEC 60076-5, 2000 IEC 60099-4, 2001 IEC 60137, 2003 IEC 60287-3-1 IEC 60297-1, 1986 IEC 606, 1978 IEC 60909-0, 2001 IEC 61024-1-2 IEC 61158-2; 2003 IEC 62271-100, 2001 IEC 654-1, 1993 IEC 68-1, 1988 IEC 68-2-27, 1987 IEC 68-2-28, 1990 IEC 68-2-30, 1980 IEC 68-2-42, 1982

Pub.Year 1990 1994 1995 1991 1990 1993 1991 1993 1992 1995 1984 1996 1995 1995 1995 1993 1989 1978, 2nd ed. 1980 1980 1982 1984 1994 1989 1977 1988 1990 1988 1996 1982 1982 1990 1992 1994 1999 1988 1972 1972 1972 1974 1985 1985 1991 1971, 1st ed. 1973 1974 1990 1996 1991 1994 1988 1989 1987 1978 1976 1982 1982 1989 1986 1991 1995 1994 1976 2000 2004 2000 2000 2001 2003 1999 1986, 3rd ed. 1978 2001 1998 2003 1985 1993, 2nd ed. 1988 1987 1990 1980 1982

IEC 68-2-43, 1976 IEC 68-2-46, 1982 IEC 68-4, 1987 IEC 687, 1992 IEC 694, 1996 IEC 751,1983 IEC 754, Pt 1, 1994 IEC 76-,1993 IEC 770, Pt 2, 1989 IEC 815, 1986 IEC 870-5-101, 1995 IEC 871-3, 1996 IEC 896, Pt 1, 1987 IEC 896, Pt 2, 1995 IEC 901, 1996 IEC 909-1, 1991 IEC 909-2, 1992 IEC 909-3, 1992 IEC TR 60909-4

1976 1982 1987 1992 1996 1983, 1st ed. 1994 1993 1989 1986 1995 1996 1987 1995 1996 1991 1991 1991 2000

StandardName Electromagnetic compatibility(EMC), Part 2 : Environment;Section 2 : compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply s Electromagnetic compatibility(EMC), Part 3 : Limits;Section 3 : Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current </= 16 A Electromagnetic compatibility - EMC, Pt 4 Testing and measurement techniques - Sec 2 Electrostatic discharge immunity test - Basic EMC publication, with amd 1 & amd 2 Electromagnetic compatibility(EMC), Part 4 : Testing and measurement techniques;Section 7 : General guide on harmonics and interharmonics measurements and instrumentation, fo Protection of Structures against lightning Protection of Structures against lightning, Part 1: General principles-Section 1 : Guide A - Selection of protection levels for lightning protection systems Industrial process measurement and control - Evaluation of system properties for the purpose of system assessment, Pt 1 General considerations and methodology Industrial process measurement and control - Evaluation of system properties for the purpose of system assessment, Pt 2 Assessment methodology Progammable controllers, Pt 2 Equipment requirments and tests Programmable controllers, Pt 4 User guidelines Alternating current disconnectors and earthing services Distribution automation using distribution line carrier systems, Part 3 Mains signalling requirements - Sec 21 MV phase to phase isolated capacitive coupling device Overhead electrical conductors : Calculation methods for stranded bare conductors Assessment of the risk of damage due to lightning Assessment of the risk of damage due to lightning Voltage transformers On load tap changers Conductors of insulated cables Electric relays, Pt 12 Directional relays and power relays with two input energizing quantities Electric relays, Pt 13 Biased (percentage) differential relays Electric relays, Pt 16 Impedance measuring relays Electric relays, Pt 20 Protection (protective) systems Electric relays, Pt 23 Contact performance Electric relays, Pt 3 single input energizing quantity measuring relays with dependent or independent time Electric relays, Pt 5 Insulation tests for electrical relays Electric relays, Pt 6 Measuring relays and protection equipment Electric relays, Pt 8 Thermal electrical relays High voltage switches, Pt 2 High-voltage switches for rated voltages of 52 kV and above, with AMD 1 of 1994 Low-voltage fuses, Part 2-1 Supplementary requirements for fuses for use by authorised persons (fuses mainly for industrial application)- sections I to V : Examples of types of standa Specification for unused mineral insulating oils for transformers and switchgear, with amd 1:1986 Specification for unused mineral insulating oils for transformers and switchgear, with amd 1:1986 AC metal enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV Tests on electric cables under fire conditions, Pt 3 Tests on bunched wires or cables Safety of household and similar electrical appliances, Pt 2 Particular requirements for battery chargers Rotating electrical machines, Pt 1 Rating and performance Rotating electrical machines, Pt 3 Specific requirements for turbine type synchronous machines Rotating electrical machines, Part 2 Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) Rotating electrical machines, Pt 2 Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) with Amds 1 & 2 Rotating electrical machines, Pt 2 Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) with Amds 1 & 2 First supplement to publication 34-2 Rotating electrical machines, Part 2 Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines Rotating electrical machines, Pt 4 Methods for determining synchronous machine quantities from tests, with amendment no.1 - 1995-04 Rotating electrical machines, Part 4 : Methods for determining synchronous machine quantites from tests Loading guide for oil immersed power transformers Specification and acceptance of new sulphur hexafluoride Specification and acceptance of new sulphur hexafluoride;Section Thirteen : Mineral oil content Specification and acceptance of new sulphur hexafluoride; Clause 26 Characteristics of string insulator units of the long rod type Low-voltage switchgear and controlgear assemblies, Part 5 Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDC Steam turbines, Part 1 : Specification Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV Class 0.5, 1 and 2 alternating current watthour meters Degrees of protection provided by enclosures - IP code Industrial process control valves, Pt 1 Control valve terminology and general considerations Industrial process control valves, Pt 2 Flow capacity Sec 1 Sizing equations for imcompressible fluid flow under installed conditions Industrial process control valves, Pt 3 Dimensions Sec 1 Face to face dimensions for flanged, two way, globe type control valves Industrial process control valves, Pt 4 Inspection and routine testing Industrial process control valves, Pt 5 Marking Industrial process control valves, Pt 7 Control valve data sheet Industrial process control valves, Pt 8 Noise consideration, Sec 1 Laboratory measurement of noise generated by aerodynamic flow through control valves, , industrialprocess control valves, Pt 8 Noise considerations Sec 2 Laboratory measurement of noise generated by hydrodynamic flow through control valves Industrial process control valves, Pt 8 Noise considerations Sec 3 Control valve aerodynamic noise prediction method Industrial process control valves, Pt 8 Noise considerations Sec 4 Prediction of noise generated by hydrodynamic flow Application guide for on-load tap-changers Power Transformers Part 1: General ,2.1 Edition ,1999 Power Transformer - Part 11:Dry-type transformers Power Transformers Part 3: Insulation levels, dielectric tests and external clearances in air , 2nd Edition, 2000 Power Transformers Part 5: ability to withstand short circuit, 2nd Edition, 2000 Surge arresters, Part 4 Metal-oxide surge arresters without gaps for a.c systems- in CD-ROM Insulated bushings for alternating voltages above 1000V Electric cables - Calculation of the current rating - Part 3-1 : Sections on operating conditions - Reference operating conditions and selection of cable type Dimensions of mechanical structures of the 482.6 mm( 19 in) series, Part 1: Panels and racks Application guide for power transformers Short-circuit currents in three-phase a.c. systems - Part 0 : Calculation of currents Protection of Structures against lightning- Part 1-2 : General principles - Guide B - Design,installation,maintenance and inspection of lightning protection systems Fiedbus for use in industrial control systems - Part 2 : Physical layer specification and service definition High-voltage switchgear and controlgear - Part 100 : high-voltage alternating-current circuit-breakers_CD-ROM Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions Environmental testing Pt 1 - General and guidance with Amd 1 Basic environmental testing procedures, Pt 2 Tests Environmental testing Pt 2 Tests - Guidance for damp heat tests Basic environmental testing procedures, Pt 2 Tests - Test Db and guidance : Dump heat, cyclic (12+12 hour cycle) with AMD 1:1985 Basic environmental testing procedures, Pt 2 Tests - Test Kc:Sulphur dioxide test for contacts and connections

Basic environmental testing procedures, Pt 2 Tests - Test Kd:Hydrogen sulphide test for contacts and connections Basic environmental testing procedures, Pt 2 Tests - Guidance to test Kd : Hydorgen sulphide test for contacts and connections Basic environmental testing procedures, Pt 4 Information for specification writers - Test summaries with two amendments Alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) Common specifications for high-voltage switchgear and controlgear standards Industrial platinum resistance thermometer sensors Test on gases evolved during combustion of materials from cables, Pt 1 Determination of the amount of halogen acid gas Power Transformers Part 2 : Temperature rise, 2nd Edition ,1993 Transmitters for use in industrial process control systems, Pt 2 Guidance for inspection and routine testing Guide for the selection of insulators in respect of polluted conditions telecontrol equipment and systems-Part 5 : Transmission protocols-Section 101:Companion standard for basic telecontrol tasks. Shunt capacitors for AC power systems having a rated voltage above 100 V, Part 3 Protection of shunt capacitors and shunt capacitor banks Stationary lead acid batteries, Pt 1 Vented types Stationary lead acid batteries _ General requirements and methods of tests, Pt 2 Valve regulated types Single-capped fluroscent lamps - Performance specifications Short-circuit currents in three-phase a.c. systems - Part 1 : Factors for the calculation of short-circuit currents in three-phase a.c. systems according to IEC 909 Short-circuit currents in three-phase a.c. systems - Part 2 : Electrical equipment - Data for short-circuit current calculations in accordance with IEC 909 (1988) Short-circuit currents in three-phase a.c. systems - Part 3 :Currents during two separate simultaneous single phase line-to-earth short circuits and partial short-circuit currents flowing t Short-circuit currents in three-phase a.c. ysytems - Part 4: Examples for the calculation of short-circuit currents

StandardNumber ANSI C100.6-3, 1984 ANSI C119.4, 1998 ANSI C12.1, 1988 ANSI C136.11, 1995 ANSI C136.4, 1995 ANSI C2, 1997 ANSI C37.06,1997 ANSI C50.10, 1990 ANSI C50.13, 1989 ANSI C50.41,2000 ANSI C84.1, 1995 ANSI/IEEE 32, 1972 ANSI/IEEE 367, 1996 ANSI/IEEE 485, 1997 ANSI/IEEE 502, 1985 ANSI/IEEE 622A, 1984 ANSI/IEEE 80, 2000 ANSI/IEEE 81, 1983 ANSI/IEEE C2, Int., 1984-87 ANSI/IEEE C37.12, 1985 ANSI/IEEE C37.63, 1984 ANSI/IEEE C37.91, 1985 ANSI/IEEE C57.12.11, 1980 ANSI/IEEE C57.94, 1982 ANSI/IES RP-7, 1991 IEEE 1025, 1993 IEEE 1050, 1996 IEEE 1115, 2000 IEEE 1119, 1988 IEEE 1159, 1995 IEEE 1185, 1994 IEEE 122, 1985 IEEE 122, 1991 IEEE 141, 1993 IEEE 142, 1991 IEEE 142/ ANSI C114.1, 1972 IEEE 242, 1986 IEEE 399, 1997 IEEE 421.1 IEEE 421.4 IEEE 446 - 1995 IEEE 450, 1995 IEEE 484, 1996 IEEE 487, 1992 IEEE 519, 1992 IEEE 522, 1992 IEEE 57 IEEE 587, 1980 IEEE 665, 1995 IEEE 690 IEEE 802.3, 1996 IEEE 802.4, 1990 IEEE 830, 1993 IEEE C37(Part 1) IEEE C37(Part 2) IEEE C37.101, 1993 IEEE C37.102 IEEE C37.81, 1989 IEEE C57.109, 1993 IEEE C57.131, 1995 IEEE C62.92.3, 1993 IEEE C62.92.4, 1991 IEEE P&E-SG, 1998 IEEEANSI/IEEE C37C37.010, 19931979 IEEEANSI/IEEE C37C37.010b, 19931985 IEEEANSI/IEEE C37C37.010e, 19931985 IEEEANSI/IEEE C37C37.012, 19931979 IEEEANSI/IEEE C37C37.081, 19931981 IEEEANSI/IEEE C37C37.082, 19931982 IEEEANSI/IEEE C37C37.09, 19931979 IEEEANSI/IEEE C37C37.09a, 19931991 IEEEANSI/IEEE C37C37.09c, 19931984 IEEEANSI/IEEE C37C37.09e, 19931985 IEEEANSI/IEEE C37C37.09g, 19931991 IEEEIEEE C37C37.04f, 19931990 IEEEIEEE C37C37.04g, 19931986 IEEEIEEE C37C37.04h, 19931990 IEEEIEEE C37C37.04i, 19931991

Pub.Year 1984 1998 1988 1995 1995 1997 1997 1990 1989 2000 1995 1972 1996 1997 1985 1984 2000 1983 1988 1985 1984 1995 1980 1982 1991 1993 1996 2000 1988 1995 1994 1985 1991 1993 1991 1972 1986 1997 1986 1990 1995 1995 1996 1992 1992 1992 1998 1980 1995 2004 1996 1990 1994 2003 2003 1993 1995 1989 1993 1995 1993 1991 1998 1979 1985 1985 1979 1981 1982 1979 1991 1984 1985 1991 1990 1986 1990 1991

StandardName Voltage or current reference devices : Solid-state devices, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 5, approved May 15 1984 American National Standard for electric connectors - Connectors for use between aluminium to aluminium or aluminium to copper bare overhead conductors Electricity metering American National Standard for roadway lighting equipment - Multiple sockets American National Standard for roadway lighting equipment - Series sockets and series-sockets receptacles National electrical safety code AC high voltage circuit breakers rated on a symmetrical current basis - Preferred ratings and related required capabilities American National Standard for rotating electrical machinery - Synchronous machines American National Standard for rotating electrical machinery - Cylindrical - rotor synchronous generators Standard for polyphase induction motors for power generating stations American National Standard for electric power supply systems and equipment - voltage ratings (60 Hertz) IEEE standard requirements, terminology and test procedure for neutral grounding devices IEEE recommended practice for determining the electric power station potential rise and induced voltage from a power fault IEEE recommended practice for sizing large lead storage batteries for generating stations and substations IEEE guide for protection, interlocking and control of fossil-fueled unit-connected steam stations IEEE recommended practice for the design and installation of electric pipe heating control and alarm systems for power generating stations IEEE guide for safety in AC substation grounding IEEE guide for measuring earth resistivity, ground impedance and earth surface potentials of a ground system National electrical safety code interpretations, 1984-1987 inclusive, A companion volume to NESC 1961-77; NESC 1978-80; NESC 1981-84, 1984-87 IEEE standard for control switchboards ANS for swithchgear : Requirements for overhead, pad-mounted, dry-vault and submersible automatic line sectionalizers for AC systems IEEE guide for protective relay applications to power transformers IEEE guide for installation of oil-immersed transformers (10 MVA and larger, 69-287 kV rating IEEE recommended practice for installation, application, operation and maintenance of dry-type general purpose distribution and power transformers Practice for industrial lighting IEEE guide to the assembly and erection of concrete pole structures, Circuits and devices, communication technology, computer, and elcetromagnetics and radiation IEEE guide for instrumentation and control equipment grounding in generating stations IEEE Recommended practice for sizing nickel-cadmium batteries for stationary applications IEEE guide for fence safety clearances in electric supply stations IEEE recommended practice for monitoring electric power quality IEEE guide for installatin methods for generating station cables IEEE recommended practice for functional and performance characteristics of control systems for steam turbine-generator units IEEE recommended practice for functional and performance characteristics of control systems for steam turbine-generator units IEEE recommended practicce for electric power distribution for industrial plants IEEE recommended practice for grounding of industrial and commercial power systems IEEE recommended practice for grounding of industrial and commercial power systems IEEE recommended practice for protection and coordination of industrial and commercial power systems IEEE recommended practicce for industrial and commercial power systems analysis IEEE Standard Definitions for Excitation Systems for Synchronous Machines IEEE Guide for the Preparation of Excitation System Specification IEEE Recommended Practice for Emergency and Standby Power Systems for Industrial and commercial Applications - Orange Book IEEE recommended practice for maintenance, testing and replacement of vented lead-acid batteries for stationary applications IEEE Recommended Practice for Installation design and Installation of Vented Lead-Acid Batteries for stationary Applications IEEE recommended practice for the protection of wire-line communication facilities serving electric power stations IEEE recommended practices and requirements for harmonic control in electrical power systems IEEE Guide for Testing Turn-to-turn Insulation on Form-wound Stator Coils for Alternating-Current Rotating Electric Machines IEEE Standards collection Distribution, power and regulating transformers IEEE guide for surge voltages in low-voltage AC power circuits Standard for generating station grounding IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - specific requirements, Pt 3 Carrier sense multiple Information processing systems - Local area networks, Pt 4 Token passing buss access method and physical layer specifications IEEE Recommended practice for software requirements specifications IEEE Power Substations IEEE PowerSwitchgear, Circuit Breakers and Fuses IEEE guide for generator ground protection IEEE Guide for AC Generator Protection IEEE guide for seismic qualification of class 1E metal-enclosed power switchgear assemblies IEEE guide for liquid-immersed transformer through-fault-current duration IEEE standard requirements for load tap changers IEEE guide for the application of neutral grounding in electrical utility systems, Part 3 Generator auxiliary systems IEEE guide for the application of neutral gounding in electrical utility systems, Part 4 Distribution IEEE Standards collection Power & Energy - Switchgear IEEE application guide for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substations and fuses IEEE standard for emergency load current-carrying capability, IEEE standards collection circuit breakers, switchgear substations and fuses Supplement to IEEE application guide for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substations and IEEE application guide for capacitance current switching for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchge IEEE guide for synthetic fault testing of AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substations and fu IEEE standard methods for measurement of sound pressure levels of AC power circuit breakers, IEEE standards collection circuit breakers, switchgear substations and fuses IEEE standard test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substations and fuses Supplement to IEEE standard test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substatio Supplement to IEEE standard test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substatio Supplement to IEEE standard test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substatio Supplement to IEEE standard test procedure for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substatio Supplement to IEEE Standard rating structure for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substat Supplement to IEEE standard rating structure for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substati Supplement to IEEE standard rating structure for AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substati Supplement to IEEE AC high-voltage circuit breakers rated on a symmetrical current basis, IEEE standards collection circuit breakers, switchgear substations and fuses

StandardNumber ISA 12.13, Part 1, 1986 ISA 75.13, 1989 ISA RP12.15, Part 2, 1990 ISA RP12.6, 1987 ISA S12.10, 1988 ISA S12.15, Part 1, 1990 ISA S18.1, 1979 ISA S18.1, 1981 ISA S5.1, 1984 ISA S5.2, 1976 ISA S5.4, ISA S5.5, 1985 ISA S50.02, 1992 ISA S50.1, 1982 ISA S67.01, 1987 ISA S67.03, 1982 ISA S67.04, 1988 ISA S67.06, 1984 ISA S67.14, 1994 ISA S7.4, 1981 ISA S71.01, 1985 ISA S71.04, 1985 ISA S72.01, 1985 ISA S75.01, 1985 ISA S75.02, 1988 ISA S75.05, 1983 ISA S75.07, 1987 ISA S75.08, 1985 ISA S75.11, 1985 ISA S75.12, 1993 ISA S75.15, 1994 ISA S75.16, 1994 ISA S75.17, 1989 ISA S75.19, 1989 ISA S77.20, 1993 ISA S77.41, 1992 ISA S77.42, 1987 ISA S77.43, 1994 ISA S82.01, 1994 ISA S82.02, 1988 ISA S82.03, 1988 ISA 37.12-1982(R1995) ISA 37.3, 1975 ISA 37.5-1982(R1995) ISA 37.8-1982(R1995) ISA 61.2, 1978 ISA 67.02.01-1999 ISA MC96.1, 1982 ISA RP 55.1, 1975 ISA RP12.13, Part 2, 1987 ISA RP16.1,2,3, 1959 ISA RP16.4, 1960 ISA RP16.5, ISA RP16.6, 1961 ISA RP2.1, 1978 ISA RP31.1, 1977 ISA RP37.2, 1982 ISA RP42.1, 1992 ISA RP52.1, 1975 ISA RP55.1, 1975 ISA RP60.1, 1990 ISA RP60.11, 1991 ISA RP60.3, 1985 ISA RP60.4, 1990 ISA RP60.6, 1984 ISA RP60.8, 1978 ISA RP60.9, 1981 ISA RP7.1, 1956 ISA RP7.7, 1984 ISA RP74.01, 1984 ISA RP75.18, 1989 ISA RP75.21, 1989 ISA S12.1, 1991 ISA S12.12, 1994 ISA S12.13, Pt.1, 1995 ISA S12.4, 1970 ISA S20, 1981 ISA S26, 1968 ISA S37.1, 1975 ISA S37.10, 1975 ISA S37.12, 1977 ISA S37.5, 1975

Pub.Year 1986 1989 1990 1987 1988 1991 1992 1981 1984 1976 1991 1985 1994 1982 1987 1982 1988 1984 1994 1981 1986 1985 1985 1985 1988 1983 1987 1986 1985 1993 1994 1994 1989 1989 1993 1992 1987 1994 1994 1988 1988 1982 1975 1982 1982 1978 1999 1982 1983 1987 1959 1960 1961 1961 1978 1977 1982 1992 1975 1975 1990 1991 1985 1990 1984 1978 1981 1956 1984 1984 1989 1989 1991 1994 1995 1970 1981 1968 1975 1975 1977 1975

ISA S37.6, 1976 ISA S37.8, 1975 ISA S5.3, 1983 ISA S51.1, 1979 ISA S51.1, 1979 ISA S61.6, 1976 ISA S67.02, 1980 ISA S67.10, 1994 ISA S7.3, 1975 ISA S71.02, 1991 ISA S75.03, 1992 ISA S75.03, 1992 ISA S75.14, 1993 ISA S75.20, 1991 ISA S75.22, 1992 ISA S77.41, 1992

1976 1975 1983 1979 1995 1976 1980 1994 1976 1991 1992 1992 1993 1991 1992 1992

StandardName Performance requirements, combustible gas detectors, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Dec. 1986 Method of evaluating the performance of positioners with analog unit signals and pneutmatic ouputtandards Library for Measurement and Control : Guidelines for quality, safety & prod Installation, operation and maintenance of hydrogen sulfide detection instruments, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, a Installation of intrinsically safe systems for hazardous (classified) location, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Area classification in hazardous (classified) dust locations, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Jan 29, 1988 Performance requirements for hydrogen sulfide detection instruments(10-100 ppm), Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1 Annunciator sequences and specifications, approved Jul 13, 1992 Annunciator sequences and specifications Instrumentation symbols and identification, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, reaffirmed July 13, 1992 Binary logic diagrams for process operations, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, reaffirmed July 13, 1992 Instrumentat loop diagrams, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Sept 9, 1991 Graphic symbols for process display, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Feb 3 1986 Fieldbus standard for use in industrial control systems, Part 2 Physical layer specification and service definition, approved May 17, 1994 Compatability of analog signals for electronic industrial process instruments, approved Jul 13 1992 Transducer and transmitter installation for nuclear safety applications, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity vol 3, reaffireme Standard for light water reactor coolant pressure boundary leak detection, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity vol 3, approv Setpoints for nuclear safety-related instrumentation, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity vol 3, approved Feb 4 1988 Response time testing of nuclear safety-related instrument channels in nuclear power plants, Standards Library for Measurement and Control : Guidelines for quality, safety and produ Qualifications and certification of instrumentation and control technicians in nuclear facilities, Standards Library for Measurement and Control : Guidelines for quality, safety and produ Air pressures for pneumatic controllers, transmitters and transmission systems, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, app Environmental conditions for process measurement and control systems : Temperature and humidity, Standards Library for Measurement and Control : Guidelines for quality, safety & Environmental conditions for process measurement and control systems : Airborne contaminants, Standards Library for Measurement and Control : Guidelines for quality, safety & pro PROWAY-LAN industrial data highway, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Feb 3 1986 Flow equations for sizing control valves, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Aug 15 1986 Control valve capacity test procedure, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Nov 29 1988 Control valve terminology, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Sept 29 1986 Laboratory measurement of aerodynamic noise generated by control valves, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, appro Installed face-to-face dimensions for flanged clamp or pinch valves, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Feb 1 Inherent flow characteristic and rangeability of control valves, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Jun 19 199 Face-to-face dimensions for socket weld-end and screwed-end globe-sytle control valves (ANSI classes 150, 300, 600, 900, 1500 and 2500), Standards Library for Measurement and Face-to-face dimensions for buttweld-end globe-style control valves (ANSI classes 150, 300, 600, 900, 1500 and 2500), Standards Library for Measurement and Control : Guidelines f Face-to-face dimensions for flanged glob-style control valve bodies (ANSI classes 900, 1500 and 2500), Standards Library for Measurement and Control : Guidelines for quality, safety Control valve aerodynamic noise prediction, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Jun 19 1991 Hydrostatic testing of control valves, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Aug 16 1989 Fossil-fuel power plant simulators - functional requirements, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 5, approved May 17 1994 Fossil-fuel power plant :Boiler Combustion controls,Approved 9 October 1992 Fossil fuel plant feedwater control system - drum-type, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 5, approved Aug 10 1987 Fossil fuel power plant unit/ plant demand development (drum type), Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 5, approved Aug Safety standard for electrical and electronic test, measuring, controlling and related equipment - General requirements, Standards Library for Measurement and Control : Guidelines fo Safety standard for electrical and electronic test, measuring, controlling and related equipment, Standards Library for Measurement and Control : Guidelines for quality, safety & produ Safety standard for electrical and electronic test, measuring, controlling and related equipment, Standards Library for Measurement and Control : Guidelines for quality, safety & produ Specifications and Tests for Potentiometric Displacement Transducers Specifications and tests for strain gage pressure transducers, approved Dec 14 1982 Specifications and Tests for Strain Gage Linear Accelerator Transducers Specifications and Tests for Strain Gage Foce Transducers Industrial computer system FORTRAN procedures for file access and the control of file contention, Standards Library for Measurement and Control : Guidelines for quality, safety and Specifications and Tests for Potentiometric Displacement Transducers Temperature measurement thermocouples, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 5 Hardware testing of digital process computers _ Recommended practice Installation, operation, and maintenance of combustible gas detection instruments, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, Terminology, dimensions and safety practices for indicating variable area meters (rotameters); RP16.1 Glass tube; RP16.2 Metal tube; RP16.3 Extension type glass tube, Standards L Nomenclature and terminology for extension type variable area meters (rotameters), Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 2 Installation, operation maintenance instructions for glass tube variable area meters (rotameters), Standards Library for Measurement and Control : Guidelines for quality, safety & prod Methods and equipment for calibration of variable area meters (rotameters), approved Jun 30 1961 Manometer tables, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Sept 30 1978 Specification installation and calibration of turbine flowmeters, approved Apr 30 1977 Guide for specifications and tests for piezoelectric acceleration transducers for aerospace testing, approved Oct 1982 Nomenclature for instrument tube fittings, approved Oct 30 1992 Recommended environments for standards laboratories, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, approved Jun 30 1975 Hardware testing of digital process computers, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, vol 3, approved Oct 30 1983 Control center facilities, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, vol 3, approved Oct 5 1990 Crating, shipping and handling for control centers, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, vol 3, approved Dec 14 1990 Human engineering for control centres, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, vol 3, approved Jun 30 1985 Documentation for control centers, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, vol 3, approved Jun 4 1990 Nameplates, labels and tags for control centers, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, vol 3, approved Feb 28 1984 Electrical guide for control centers, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, vol 3, approved Jun 28 1978 Piping guide for control centers, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity, vol 3, approved May 31 1981 Pneumatic control circuit pressure test, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved July 1, 1956 Producing quality instrument air, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Sept.30 1984 Application and installation of continuous-belt weighbridge scales, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Mar 30 Control valve position stability, Standards Library for Measurement and Control, Guidelines for quality, safety & productivity vol 4, approved Oct 30, 1989 Process data presentation for control valves, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 4, approved Oct 28 1984 Definitions and information pertaining to electrical instruments in hazardous (classified) locations, Standards Library for Measurement and Control : Guidelines for quality, safety & pro Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations, Standards Library for Measurement and Contro Performance requirements, combustible gas detectors Instrument purging for reduction of hazardous area classification, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Oct 30 Specification forms for process measurement and control instruments, primary elements and control valves, approved Oct 30 1981g Dynamic response testing of process control instumentation, approved Oct 1966 Electric transducer nomenclature and terminology, approved Dec. 14, 1982 Specifications and tests for piezoelectric pressure and sound-pressure transducers, approved Dec 14 1982 Specifications and tests for potentiometric displacement transducers, approved Dec 14 1982 Specifications and tests for strain gage linear acceleration transducers, approved Dec 14 1982

Specifications and tests of potentiometric pressure transducers, approved Dec 14 1982 Specifications and tests for strain gage force transducers, approved Dec 14, 1982 Graphic symbols for distributed control/ shared display instrumentation, logic and computer systems, Standards Library for Measurement and Control : Guidelines for quality, safety & Process instrumentation terminology, Standards Library for Measurement and Control :Guidelines for quality,safety and productivity vol.3, reaffirmed June 30 1993 Process instrumentation terminology Industrial computer system FORTRAN procedures for executive functions, process input/output and bit manipulation, Standards Library for Measurement and Control : Guidelines for Nuclear-safety-related instrument sensing line piping and tubing standards for use in nuclear power plants, Standards Library for Measurement and Control : Guidelines for quality, saf Sample-line piping and tubing standard for use in nuclear power plants, Standards Library for Measurement and Control : Guidelines for quality, safety and productivity vol 3, approved Quality standard for instrument air, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 1, approved Nov 16, 1981 Environmental conditions for process measurement and control system : Power, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 3, ap Face-to-face dimensions for integral flanged globe-style control valve bodies (ANSI Classes 125, 150, 250, 300 and 600), Standards Library for Measurement and Control : Guidelines Face-to-face dimensions for integral flanged globe-style control valve bodies (ANSI Classes 125, 150, 250, 300 and 600), Standards Library for Measurement and Control : Guidelines Face-to-face dimensions for buttweld-end globe-style control valves (ANSI class 4500), Standards Library for Measurement and Control : Guidelines for quality, safety & productivity v Face-to-face dimensions for separable flanged globe-style control valves (ANSI classes 150, 300 and 600), Standards Library for Measurement and Control : Guidelines for quality, sa Face-to-centerline dimensions for flanged globe-style angle control valve bodies (ANSI classes 150, 300 and 600), Standards Library for Measurement and Control : Guidelines for qu Fossil fuel power plant boiler combustion controls, Standards Library for Measurement and Control : Guidelines for quality, safety & productivity vol 5, approved Nov 1992

StandardNumber ISO 10816-1, 1995 ISO 10816-2, 1996 ISO 10816-3, 1998 ISO 10816-4, 1998 ISO 10816-5, 2000 ISO 10816-6, 1995 ISO 1940, Part 1, 1986 ISO 2314, 1989 ISO 2314, 1989 ISO 2531, 1991 ISO 2531, 1998 ISO 3511, Pt 1, 1977 ISO 3511, Pt 2, 1984 ISO 3511, Pt 3, 1984 ISO 3511, Pt 4, 1985 ISO 4179, 1985 ISO 4406, 1987 ISO 4427, 1996 ISO 5167, Pt 1, 1991 ISO 7752, Pt 5, 1985 ISO 8092-1, 1996 ISO 8092-2, 1996 ISO 8092-3, 1996 ISO 8180, 1985 ISO 8566, Pt 5, 1992 ISO 8686, Pt 1, 1989 ISO 8686, Pt 5, 1992 ISO 9096, 1992 ISO/DIS 9001-9004

Pub.Year 1995 1996 1998 1998 2000 1995 1986 1989 1989 1991 1998 1977 1984 1984 1985 1985 1987 1996 1991 1985 1996 1996 1996 1985 1992 1989 1992 1992 1999

StandardName Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Large land-based steam turbine generator sets in excess of 50 MW Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3 : Industrial machines with nominal power above 15kW and nominal speeds betw Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 4 :Gas turbine driven sets excluding aircraft derivatives Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5 :Machine sets in hydraulic power generating and pumping plants Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 6 : Reciprocating machines with power ratings above 100kW Mechanical vibration - balance quality requirements of rigid rotors, Part 1 Determination of permissible residual unbalance Gas turbines - Acceptance tests Gas turbines - Acceptance tests Ductile iron pipes, fittings and accessories for pressure pipelines Ductile iron pipes, fittings, accessories and their joints for water or gas applications Process measurement control functions and instrumentation - symbolic representation, Pt 1 Basic requirements Process measurement control functions and instrumentation - symbolic representation, Pt 2 Extension of basic requirements Process measurement control functions and instrumentation - symbolic representation, Pt 3 Detailed symbols for instrument interconnection diagrams Process measurement control functions and instrumentation - symbolic representation, Pt 4 Basic symbols for process computer, interface and shared display/ control functions Ductile iron pipes for pressure and non-pressure pipelines - Centrifugal cement mortar lining - General requirements Hydraulic fluid power - fluids - method for coding level of contamination by solid particles Polyethyelene pipes for water supply - Specifications Measurement of fluid flow by means of pressure differential devices, Pt 1 Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full, with amendm Lifting appliances-Controls-Layout and characteristics-Part 5 : Overhead travelling cranes and portal bridge cranes Road vehicles - Connections for on-board electrical wiring harnesses, Part 1 Tabs for single-pole connections - Dimensions and specific requirements Road vehicles - Connections for on-board electrical wiring harnesses, Part 2 Definitions, test methods and general performance requirements Road vehicles - Connections for on-board electrical wiring harnesses, Part 3 Tabs for multi-pole connections - Dimensions and specific requirements Ductile iron pipes _ Polyethylene sleeving Cranes-Cabins;Part 5 : Overhead travelling and portal bridge cranes Cranes-Design principles for loads and load combinations, Part 1 : General Cranes-Design principles for loads and load combinations, Part 5 : Overhead travelling and portal bridge cranes Stationary source emissions-Determination of concentration and mass flow rate of particulate material in gas-carrying ducts-Manual gravimetric method Quality management system - Requirements; guidelines for performance improvements

StandardNumber Pub.Year StandardName MSS-SP 25, 1993 1993 Standard marking system for valves, fittings, flanges and unions MSS-SP 42, 1990 1990 Class 150 corrosion resistant gate, globe, angle and check valves with flanged and butt weld ends MSS-SP 58, 1993 1993 Pipe hangers and supports - Materials, design and manufacture MSS-SP 6, 1996 1996 Standard finishes for contact faces of pipe flanges and connecting end flanges of valves and fittings MSS-SP 61, 1992 1992 Pressure testing of steel valves MSS-SP 67, 1995 1995 Butterfly valves MSS-SP 69, 1996 1996 Pipe hangers and supports - Selection and application MSS-SP 70, 1990 1990 Cast iron gate valves, flanged and threaded ends MSS-SP 71, 1990 1990 Cast iron swing check valves, flanges and threaded ends MSS-SP 72, 1992 1992 Ball valves with flanged or butt-welding ends for general services MSS-SP 78, 1987 1992 Cast iron plug valves, flanged and threaded ends MSS-SP 80, 1987 1987 Bronze gate, globe, angle and check valves MSS-SP 83, 1995 1995 Class 3000 steel pipe unions socket-welding and threaded MSS-SP 84, 1990 1990 Valves - Socket welding and threaded ends MSS-SP 84, 1990 1993 Diaphragm type valves MSS-SP 85, 1994 1994 Cast iron globe and angle valves flanged and threaded ends MSS-SP 88, 1993 1993 Diaphragm type valves MSS-SP 89, 1991 1991 Pipe hangers and supports - Fabrication and installation practices MSS-SP 89, 1998 1998 Pipe hangers and supports - Fabrication and installation practices MSS-SP 99, 1994 1994 Instrument valves

StandardNumber Pub.Year NFPA 10, 1998 1998 NFPA 211 2003 NFPA 214, 1996 1996 NFPA 30 2003 NFPA 70B 2002 NFPA 780, 2004 2004 NFPA 8503, 1997 1997 NFPA 101 2003 NFPA 11 1998 NFPA 12, 20005 2005 NFPA 13,2002 2002 NFPA 14,2000 2000 NFPA 15,2001 2001 NFPA 20 1999 NFPA 2001 1996 NFPA 220, 1985 1999 NFPA 37 2002 NFPA 497,2004 2004 NFPA 54 2002 NFPA 70, 2002 2002 NFPA 72 1999 NFPA 850 2000 NFPA 851,2000 2000

StandardName Standard for Portable Fire Extinguishers Chimneys, fireplaces, vents and solid fuel burning appliances Standard on Water-Cooling Towers Flammable and combustible liquid code Recommended practice for electrical equipment maintenance Standard for the Installation of Lightning Protection Systems. 2004 edition Pulverised fuel systems 1997 edition Life safety code Standard for low expansion foam Carbon dioxide extinguishing systems Installation of sprinkler systems Standard for the installation of standpipe and hose systems Standard for water spray fixed systems for fire protection Standard for the installation of stationary pumps for fire protection Standard on clean agent fire extinguishing system Standard on Types of building construction, 1999 Standard for the installation and use of stationary combustion engines and gas turbines Recommended Practice for the Classification of Flammable Liquids, Gases, or HAzardous(Classified) Locations for Electrical Installations in Chemical Process Areas National fuel gas code National electrical code National fire alarm code Recommended practice for fire protection for electric generating plants and high voltage direct current converter stations Recommended Practice for Fire Protection for Fire Protection for Hydroelectric Generating Plants

StandardNumber Pub.Year StandardName NEMA 250, 1997 1997 NEMA Standards - Enclosures for electrical equipment (1000 volts maximum) NEMA ICS6, 1993 1993 NEMA Standards on Industrial control and systems enclosures NEMA ICS6, 1993 1994 NEMA Standards publication on Industrial control and systems enclosures NEMA MG 1, 1998 1998 NEMA Standards - Motors and generators NEMA MG2, 1989 1989 Safety standard for construction and guide for selection, installation and use of electric motors and generators, First revision, July 1991 NEMA PE1,2003 2003 NEMA Standards - publication PE1, Uninterruptible power systems NEMA SG3,1995 1996 NEMA Standards - publication SG 3-1995, Power switching equipment NEMA SG4,2000 2000 NEMA Standards - publication SG 4-2000, Alternating current high voltage circuit breakers NEMA SM 23, 1979 1979 Steam turbines for mechanical drive service NEMA SM 23, 1991 1991 Steam turbines for mechanical drive service NEMA TR 1, 1993 1994 NEMA Standards Publication on transformers, regulators and reactors NEMA VE1,1998 1998 Metal cable tray systems

StandardNumber Pub.Year StandardName OES 1994 General Epecification for Roads OES 1994 Highway Design Manual, Vol. 2 OES 1994 Highway Design Manual, Vol. 1 OES Fire Safety Requirements, Part 3 OES Fire Safety Requirements, Part 2 OES Fire Safety Requirements, Part 1

StandardNumber Pub.Year StandardName PFI ES16, 1996 1996 Pipe Fabrication Institute Standard for Access holes, bosses and plugs for radiographic inspection of pipe welds PFI ES2, 1994 1994 Pipe Fabrication Institute Standard for Method of dimensioning piping assemblies PFI ES21, 1995 1995 Pipe Fabrication Institute Standard for Internal machining and fit-up of GTAW root pass circumferential butt welds PFI ES24, 1995 1995 Pipe Fabrication Institute Standard for Pipe bending methods, tolerances, process and material requirements PFI ES26, 1996 1996 Pipe Fabrication Institute Standard for Welded load bearing attatchments to pressure retaining piping materials PFI ES29, 1995 1995 Pipe Fabrication Institute Standard for Internal abrasive blast cleaning of ferritic piping PFI ES31, 1995 1995 Pipe Fabrication Institute Standard for protection of ends of fabricated piping assemblies PFI ES34, 1995 1995 Pipe Fabrication Institute Standard for fabricated piping PFI ES35, 1995 1995 Pipe Fabrication Institute Standard for Nonsymmetrical bevels and joint configurations for butt welds PFI ES36, 1995 1995 Pipe Fabrication Institute Standard for Branch reinforcement work sheets PFI ES4, 1996 1996 Pipe Fabrication Institute Standard for Hydrostatic testing of fabricated piping PFI ES40, 1994 1994 Pipe Fabrication Institute Standard for Method of dimensioning grooved piping assemblies PFI ES5, 1996 1996 Pipe Fabrication Institute Standard for Cleaning of fabricated piping PFI ES7, 1994 1994 Pipe Fabrication Institute Standard for Minimum length and spacing for welding nozzles

StandardNumber Pub.Year StandardName UL 103, 1994 1994 Standard for safety chimneys, factory-built, residential type and building heating appliance, with revision of Aug 1995 UL 508, 1999 1999 Industrial control equipment UL 58, 1986 1986 Steel underground tanks for flammable and combustible liquids UL 726, 1990 1990 Standard for safety oil-fired boiler assemblies, with revisions of 1993 and 1994 UL 730, 1994 1994 Standard for safety oil-fired wall furnaces, with revision of August 1995 UL 845, 1995 1995 Motor control centres

StandardNumber ANSI/SAMA RC8-10, 1963 CFR 29 PARTS 1900 TO 1910.999 COINDS 21, 1986 IBC,2003 JIS B8374, 1993 SAE J747, 1990 SBCCI, SBC, 1999 SBCCI, SPC, 1997 SBCCI, SPSDC, 1997 UBC 1, 1994 UBC 2, 1994 UBC 3, 1994 UPC 1997 CTI ATC-105 WRC BULLETIN 107/65 WRC BULLETIN 297/87

Pub.Year 1963 2001 1986 2003 1993 1990 1999 1999 1997 1994 1994 1994 1997 2000 1979 1987

StandardName Thermocouple thermometers _ Pyrometers Code of federal Regulations 29 Parts 1900 to 1910.999 ; Revised as of July 1, 2001 - Labor Minimal National Standards thermal power plant International Building Code,2003 Japanese Industrial Standard for pneumatic systems - 3-port solenoid operated valves Surface vehicle standard, Control valve test procedure Standard building code 1999 Edition Standard plumbing code 1997 Edition Standard private sewage disposal code 1997 Edition Uniform Building Code, Vol 1 Administrative, fire and life safety, and field inspection provisions Uniform Building Code, Vol 2 Structural engineering design provisions Uniform Building Code, Vol 3 Material, testing and installation standards Uniform Plumbling code - 1997 CTI Code tower standard specifications - Acceptance test code for water-cooling towers WRC Bulletin - Local Stress in Spherical and Cylindrical Shells due to External Loadings WRC Bulletin - Local Stress in Spherical and Cylindrical Shells due to External Loadings-Supplement to WRC Bulletin No. 107