8-Bitar: Build Document Last Updated March 2018
8-Bitar: Build Document Last Updated March 2018
It does one octave down and has a glitchy and gated sound
reminiscent of the 8-bit era of videogaming. It's a very simple one-
knob design – a perfect build for a beginner or fans of small simple
circuits.
Wiring
For more info on how to wire up the stompswitch, jacks ect, please
visit the Parasit Studio website and download the PDF called
”offboard wiring”. You can find it here:
http://www.parasitstudio.se/build-docs.html
Drilling
The 8-Bitar has only one knob, so drill at your own preference. It's
a good fit for a 1590B enclosure, but it can also fit inside a 1590A
with some careful measurement.
8-Bitar Bill of Material (BOM)
Resistors Capacitors IC's
R1 1M C1 100nF U1 CD4069UBE
R2 1M C2 100nF
R3 1M C3 2.2nF Transistor(s)
R4 47K C4 4.7nF Q1 2N3904
R5 1M C5 100pF
R6 10K C6 1nF Potentiometers
R7 10K C7 4.7uF LEVEL A10K
R8 10K C8 10uF
R9 100K Diodes
CLR* 4.7K-22K D1 1N4001
1x LED for bypass
Schematic
Troubleshooting
There's always a chance of running into trouble. To minimize error,
follow the BOM and general building tips carefully. Take your time
and don't rush. Take a break now and then. Use good solder, and it
helps to have a decent soldering station insted of a cheap iron.
If you are still having trouble, please visit the madbean forum
Parasit Studio subforum section and ask for help there.
http://www.madbeanpedals.com/forum/index.php?board=84.0
If you have bought the Musikding kit and have recieved a faulty or
missing component, please contact musikding directly.
Terms of use
PCB's from Parasit Studio are intended for DIY use only. Commersial resale is
not allowed. It's meant for personal use, which means that it's not allowed to
build alot of pedals and sell them for profit to strangers using public forums
and craiglist ads. However, it's totally ok to build a few pedals and sell to your
friends and bandmates. After all, that's what this hobby is about. DIY or DIE!
www.parasitstudio.se
parasitstudio@gmail.com