Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 43 views

    Mixer - Splitter V42 PDF

    Uploaded by

    Andre Duarte
    This document provides instructions for building a signal mixer/splitter pedal using a PCB design. The mixer/splitter allows splitting or mixing guitar signals and includes two parallel effect loops. It has an optimized layout for compact size and easy mounting. The document includes a schematic, bill of materials, building instructions, and disclaimer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Mixer - Splitter V42 PDF

    Uploaded by

    Andre Duarte
    43 views4 pages
    This document provides instructions for building a signal mixer/splitter pedal using a PCB design. The mixer/splitter allows splitting or mixing guitar signals and includes two parallel effect loops. It has an optimized layout for compact size and easy mounting. The document includes a schematic, bill of materials, building instructions, and disclaimer.

    Original Description:

    Original Title

    Mixer_Splitter V42.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for building a signal mixer/splitter pedal using a PCB design. The mixer/splitter allows splitting or mixing guitar signals and includes two parallel effect loops. It has an optimized layout for compact size and easy mounting. The document includes a schematic, bill of materials, building instructions, and disclaimer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    43 views4 pages

    Mixer - Splitter V42 PDF

    Uploaded by

    Andre Duarte
    This document provides instructions for building a signal mixer/splitter pedal using a PCB design. The mixer/splitter allows splitting or mixing guitar signals and includes two parallel effect loops. It has an optimized layout for compact size and easy mounting. The document includes a schematic, bill of materials, building instructions, and disclaimer.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MIXER/SPLITTER V4.

    2
    Parallel splitting and mixing tool.

    Overview
    This is a must-have for your pedalboard. Depending how you use it, it can be:

     Signal Splitter,
     Signal Mixer,
     Two parallel effect loops
     Clean Blend

    The V4.2 release has an optimized layout for space savings and easier mounting in a 1590B enclosure.

    General
    The Mixer/Splitter is a version of the Pro-cessor without the HP and LP filters. It comes in handy when filtering is not
    needed but splitting or mixing signals is key!

    Example of usage
    Schematic
    Bill of Materials
    Device# Qty Value Comment
    Resistors R1, R2 2 33k
    R3, R4, R5, R6, R13, R14 6 1M
    R11 1 3k9* *check with your LED first!
    R15 1 100R
    Capacitors C1, C3, C4 3 220n box film
    C5, C6, C7, C8 4 10uF polarized electro
    C9 1 100uF polarized electro
    C10 1 22uF polarized electro
    Pots BLEND 1 25k-B linear
    Diodes D1 1 1n4001
    D2 1 LED superbright color of choice
    ICs IC1, IC4 2 TL072P Use OPA2134 or TLC2272 for extra low noise
    Other Jack1-6 6 NRJ6-HM-1 Mouser Link.
    alternative 6 NRJ4- only metal nuts will fit!

    Pay attention when selecting the jacks. Unfortunately there are no NRJ4 with metal tip anymore, so you need to buy
    the stereo version (NRJ6) when you want them grounded to the enclosure (-HM).

    You can also use the plastic version but you will need to ground your enclosure via a piece of wire. Also the plastic
    nuts will not fit next to each other as they are too close. There are round metal nuts which will work on the plastic
    shaft.

    When ordering make sure you order the version with nut included or order the nuts separately!
    Building
    Start populating resistors and diode first, then IC sockets and capacitors. Then go the jacks. You need to clip of the
    middle contact row and any plastic pins to fit it in. Last mount the BLEND pot from the backside.

    Finally
    The splitter/mixer is a universal tool for every guitarist. Use it in one of the suggested ways or – if you found another
    use for it – let me know what it is.

    Disclaimer & License

    PCBs purchased from TH custom effects are intended for DIY / non-commercial use only. It is not allowed to
    redistribute the PCBs and artwork from this document. However, you can uses these instructions and PCBs
    to build and sell your own product based on PCBs ordered from TH custom effects.

    You might also like