Study Guide For Iassc Certified Lean Six Sigma Green Belt (Icgb) Certification Exam

STUDY GUIDE FOR IASSC
CERTIFIED LEAN SIX SIGMA

GREEN BELT (ICGB)
CERTIFICATION EXAM
ICGB Practice Test and Preparation Guide
GET COMPLETE DETAIL ON ICGB EXAM GUIDE TO CRACK LEAN SIX SIGMA GREEN BELT. YOU CAN
COLLECT ALL INFORMATION ON ICGB TUTORIAL, PRACTICE TEST, BOOKS, STUDY MATERIAL,
EXAM QUESTIONS, AND SYLLABUS. FIRM YOUR KNOWLEDGE ON LEAN SIX SIGMA GREEN BELT
AND GET READY TO CRACK ICGB CERTIFICATION. EXPLORE ALL INFORMATION ON ICGB EXAM
WITH THE NUMBER OF QUESTIONS, PASSING PERCENTAGE, AND TIME DURATION TO COMPLETE
THE TEST.
ICGB Practice Test
ICGB is IASSC Certified Lean Six Sigma Green Belt– Certification offered by the
IASSC. Since you want to comprehend the ICGB Question Bank, I am assuming you
are already in the manner of preparation for your ICGB Certification Exam. To prepare
for the actual exam, all you need is to study the content of this exam questions. You
can recognize the weak area with our premium ICGB practice exams and help you to
provide more focus on each syllabus topic covered. This method will help you to
increase your confidence to pass the IASSC Lean Six Sigma Green Belt certification
with a better score.
IASSC Lean Six Sigma Green Belt Certification Practice Exam 1

ICGB Exam Details
Exam Name IASSC Certified Lean Six Sigma Green Belt
Exam Code ICGB
Exam Fee USD $295
Exam Duration 180 Minutes
Number of
100
Questions
Passing Score 385/500
Format Multiple Choice
Schedule
Book Your Exam
Exam
Sample
IASSC ICGB Exam Sample Questions and Answers
Questions
Practice Exam IASSC Certified Lean Six Sigma Green Belt Practice Test

ICGB Exam Syllabus
Define Phase
The Basics of Six - Meanings of Six Sigma

Sigma - General History of Six Sigma & Continuous Improvement
- Deliverables of a Lean Six Sigma Project
- The Problem Solving Strategy Y = f(x)
- Voice of the Customer, Business and Employee
- Six Sigma Roles & Responsibilities
The Fundamentals - Defining a Process
of Six Sigma - Critical to Quality Characteristics (CTQ’s)
- Cost of Poor Quality (COPQ)
- Pareto Analysis (80:20 rule)
- Basic Six Sigma Metrics
a. including DPU, DPMO, FTY, RTY Cycle Time, deriving these
metrics and these metrics
Selecting Lean Six - Building a Business Case & Project Charter
Sigma Projects - Developing Project Metrics
- Financial Evaluation & Benefits Capture
The Lean Enterprise - Understanding Lean
- The History of Lean
- Lean & Six Sigma
- The Seven Elements of Waste
a. Overproduction, Correction, Inventory, Motion,
Overprocessing, Conveyance, Waiting.
- 5S
a. Straighten, Shine, Standardize, Self-Discipline, Sort
Measure Phase
Process Definition - Cause & Effect / Fishbone Diagrams

- Process Mapping, SIPOC, Value Stream Map
- X-Y Diagram
- Failure Modes & Effects Analysis (FMEA)
Six Sigma Statistics - Basic Statistics
- Descriptive Statistics
- Normal Distributions & Normality
- Graphical Analysis

Measurement - Precision & Accuracy
System Analysis - Bias, Linearity & Stability
- Gage Repeatability & Reproducibility
- Variable & Attribute MSA
Process Capability - Capability Analysis
- Concept of Stability
- Attribute & Discrete Capability
- Monitoring Techniques
Analyze Phase
Patterns of - Multi-Vari Analysis

Variation - Classes of Distributions
Inferential - Understanding Inference
Statistics - Sampling Techniques & Uses
- Central Limit Theorem
Hypothesis Testing - General Concepts & Goals of Hypothesis Testing
- Significance; Practical vs. Statistical
- Risk; Alpha & Beta
- Types of Hypothesis Test
Hypothesis Testing - 1 & 2 sample t-tests
with Normal Data - 1 sample variance
- One Way ANOVA
a. Including Tests of Equal Variance, Normality Testing and
Sample Size calculation, performing tests and interpreting
results.
Hypothesis Testing - Mann-Whitney
with Non-Normal - Kruskal-Wallis
Data - Mood’s Median
- Friedman
- 1 Sample Sign
- 1 Sample Wilcoxon
- One and Two Sample Proportion
- Chi-Squared (Contingency Tables)
a. Including Tests of Equal Variance, Normality Testing and
Sample Size calculation, performing tests and interpreting
results.
Improve Phase

Simple Linear - Correlation
Regression - Regression Equations
- Residuals Analysis
Multiple Regression - Non- Linear Regression
Analysis - Multiple Linear Regression
- Confidence & Prediction Intervals
- Residuals Analysis
- Data Transformation, Box Cox
Control Phase
Lean Controls - Control Methods for 5S

- Kanban
- Poka-Yoke (Mistake Proofing)
Statistical Process - Data Collection for SPC
Control (SPC) - I-MR Chart
- Xbar-R Chart
- U Chart
- P Chart
- NP Chart
- X-S chart
- CumSum Chart
- EWMA Chart
- Control Chart Anatomy
Six Sigma Control - Cost Benefit Analysis
Plans - Elements of the Control Plan
- Elements of the Response Plan

ICGB Questions and Answers Set
01. After a Belt has put data through the smoothing process which chart
would be used to look for trends in the data?
a) Moving Average Chart
b) Multi-Vari Chart
c) X bar Chart
d) Pareto Chart
Answer: a
02. As a standard for a process to be at the 6 Sigma quality level, it must

have?
a) Cp & Cpk > 1.5
b) Cp & Cpk >2
c) Cp >1.5 & Cpk >2.0
d) Cp >2.0 & Cpk >1.5
Answer: b
03. To draw inferences about a sample population being studied by

modeling patterns of data in a way that accounts for randomness and
uncertainty in the observations is known as ____________________.
a) Influential Analysis
b) Inferential Statistics
c) Physical Modeling
d) Sequential Inference
Answer: b

04. A two-sample T-test does which of the following?
a) Compares the medians to determine if sample 1 is statistically difference from

sample 2
b) Subtracts the mean of sample 1 from sample 2 and compares the difference to
zero to determine if they are equal
c) Compares the means to determine if sample 1 is statistically difference from

sample 2
d) test of the difference between two population medians
Answer: c
05. Which statement(s) are true about the Fitted Line Plot shown here?
There are 2 correct answers to this question.
a) When Reactant increases, the Energy Consumed increases.
b) The slope of the equation is a positive 130.5.
c) The predicted output Y is close to -18 when the Reactant level is set to 6.
d) Over 85 % of the variation of the Energy Consumed is explained by the Reactant

via this Linear Regression.
Answer: c, d

06. As we calibrate our Measurement System to assure accurate data we
frequently encounter Bias which is the __________________ of a
measured value from the ________________ value.
a) Spread, Mean of the population
b) Deviation, hoped for
c) Deviation, true
d) Spread, idea
Answer: c
07. A kurtosis of -1,2754 indicates?
a) Platykurtic (flat with a short tail)
b) Leptokurtic (peaked with long tails)
c) Multi-modal (more than one distribution)
d) Kanban Model
Answer: a
08. If a Histogram displays two peaks the distribution would likely be

_____________.
a) Transformed
b) Multi-skewed
c) Bimodal
d) Bi-attribute
Answer: c

09. All of the following are benefits of control plans except?
a) Coordinates ongoing team and individual involvement
b) Standardizes processes and work procedures
c) Ensures compliance with changes through auditing and corrective actions
d) Measures process performance, stability and capability
e) Plans actions to mitigate possible out-of-control conditions
f) Helps to analyze and eliminate potential x's
Answer: f
10. When analyzing a data set we frequently graph one metric as a

function of another. If the slope of the Correlation line is -2.5 we would say
the two metrics are ___________ correlated?
a) Positively
b) Not
c) Negatively
d) None
Answer: c

Full Online Practice of ICGB Certification
ProcessExam.com is one of the world’s leading certifications, Online Practice Test
providers. We partner with companies and individuals to address their requirements,
rendering Mock Tests and Question Bank that encourages working professionals to
attain their career goals. You can recognize the weak area with our premium ICGB
practice exams and help you to provide more focus on each syllabus topic covered.
Start Online practice of ICGB Exam by visiting URL
https://www.processexam.com/iassc/iassc-certified-lean-six-sigma-
green-belt-icgb

Study Guide For Iassc Certified Lean Six Sigma Green Belt (Icgb) Certification Exam

Uploaded by

Copyright:

Available Formats

Study Guide For Iassc Certified Lean Six Sigma Green Belt (Icgb) Certification Exam

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Study Guide For Iassc Certified Lean Six Sigma Green Belt (Icgb) Certification Exam

Uploaded by

Copyright:

Available Formats

What is the purpose of the provided study guide?

What is the purpose of the provided study guide?

What topics are covered in the Define phase of the exam syllabus?

What topics are covered in the Define phase of the exam syllabus?

STUDY GUIDE FOR IASSC

CERTIFIED LEAN SIX SIGMA

IASSC Lean Six Sigma Green Belt Certification Practice Exam 1

Exam Name IASSC Certified Lean Six Sigma Green Belt

Exam Code ICGB

Exam Fee USD $295

Exam Duration 180 Minutes

Passing Score 385/500

Format Multiple Choice

IASSC Lean Six Sigma Green Belt Certification Practice Exam 2

The Basics of Six - Meanings of Six Sigma

Process Definition - Cause & Effect / Fishbone Diagrams

IASSC Lean Six Sigma Green Belt Certification Practice Exam 3

Patterns of - Multi-Vari Analysis

IASSC Lean Six Sigma Green Belt Certification Practice Exam 4

Lean Controls - Control Methods for 5S

IASSC Lean Six Sigma Green Belt Certification Practice Exam 5

a) Moving Average Chart

02. As a standard for a process to be at the 6 Sigma quality level, it must

a) Cp & Cpk > 1.5

b) Cp & Cpk >2

c) Cp >1.5 & Cpk >2.0

d) Cp >2.0 & Cpk >1.5

03. To draw inferences about a sample population being studied by

IASSC Lean Six Sigma Green Belt Certification Practice Exam 6

a) Compares the medians to determine if sample 1 is statistically difference from

c) Compares the means to determine if sample 1 is statistically difference from

d) test of the difference between two population medians

There are 2 correct answers to this question.

a) When Reactant increases, the Energy Consumed increases.

b) The slope of the equation is a positive 130.5.

d) Over 85 % of the variation of the Energy Consumed is explained by the Reactant

IASSC Lean Six Sigma Green Belt Certification Practice Exam 7

a) Spread, Mean of the population

b) Deviation, hoped for

07. A kurtosis of -1,2754 indicates?

a) Platykurtic (flat with a short tail)

b) Leptokurtic (peaked with long tails)

c) Multi-modal (more than one distribution)

08. If a Histogram displays two peaks the distribution would likely be

IASSC Lean Six Sigma Green Belt Certification Practice Exam 8

a) Coordinates ongoing team and individual involvement

b) Standardizes processes and work procedures

c) Ensures compliance with changes through auditing and corrective actions

d) Measures process performance, stability and capability

e) Plans actions to mitigate possible out-of-control conditions

f) Helps to analyze and eliminate potential x's

10. When analyzing a data set we frequently graph one metric as a

IASSC Lean Six Sigma Green Belt Certification Practice Exam 9

Start Online practice of ICGB Exam by visiting URL

IASSC Lean Six Sigma Green Belt Certification Practice Exam 10

You might also like