Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
47 views

An-Najah University: Electrical Circuits Lab

This document is a lab report for an experiment on simulating RLC circuits using computer simulation. The experiment objectives were to study basic logic gates like AND, OR, NAND and inverters using integrated circuits on a breadboard. The tools used included logic gates, a power supply and multimeter. The procedures involved setting up the gates on a breadboard with correct pin connections to the power supply and measuring voltages. The conclusion was that the experiment helped understand functionality of logic gates, use of lab equipment, IC datasheets and effects of floating pins.

Uploaded by

Adel Atawi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
47 views

An-Najah University: Electrical Circuits Lab

This document is a lab report for an experiment on simulating RLC circuits using computer simulation. The experiment objectives were to study basic logic gates like AND, OR, NAND and inverters using integrated circuits on a breadboard. The tools used included logic gates, a power supply and multimeter. The procedures involved setting up the gates on a breadboard with correct pin connections to the power supply and measuring voltages. The conclusion was that the experiment helped understand functionality of logic gates, use of lab equipment, IC datasheets and effects of floating pins.

Uploaded by

Adel Atawi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

An-Najah University

ELECTRICAL CIRCUITS LAB

Lab(10641215) Experiment #12

Created by
:

& Adel Bani Jaber


2020

Instructor Name: Dr.Omar Khaled Tamimi Course Name: ELECTRICAL CIRCUITS LAB

Time: Wednesday (2-5) . Date: 13-6-2019.

Section: Electrical Engineering. Semster :second Semester 2020-2021.

Group Members: Adel Bni Jaber &.

Computer simulation of RLC circuit response

*Introduction and Objectives *

we studied in -Digital 1- About gates all study was theoretical but not practical so at
this course we will take the practical part .At this Exp we will take the major gates
and use the ICs in the breadboard to see their effects logically and electrically, to do
this first thing is to distinguish the equipment's at lab, verify them too , and the same
. for electronic workbench

**Tools and Equipment's

: the tools we used in this Exp are

.And gate. ♦7432 Or gate 7408♦

.Inverter gate. ♦7400 NAND gate 7404♦

.Multimeter. ♦Power supply ♦

♦ .Date Sheets for IC's


**************************************************

*Procedures*

turn the power supply on and connect the wires in fixed input at .1

.channel 3 of the power source the voltage give is 5V

Connect the IC in the breadboard and connect the wires in the .2

breadboard the positive on the breadboard with +Ve and the negative

.with the -Ve

The Vcc on the IC will be connected with the (+) and the Ground .3

.)-( with the

connect first pin , second pin and third pin the inputs will be first .4

.and second ones and the output is the third

.connect Multimeter and measure voltage.5

.Find voltage on all cases.6


***********************************************************

*Conclusion*

in this Experiment we know to use equipment's in lab , we realized the


functionality of the gates (Inverter ,AND,OR,NAND) , and we see the data
sheets of IC's and understand them , learn a new Terminology (Floating pin )
.and it effect

You might also like