E All2019 PDF

Capacitors
General Catalog
ELECTROLYTIC
CAPACITORS
www.sunelec.co.jp
Capacitors General Catalog
Aluminum Electrolytic Capacitors with
Hybrid Conductive Polymer
Aluminum Electrolytic Capacitors
PRECAUTIONS
■ The contents of this catalog are current as of December 2019. They may change without prior
notice. When ordering products, please be sure to request specifications and carefully to follow
instruction.
■ Products described herein are not intended for applications requiring extremely high reliability (for
example, those in which extensive human injury or property damage may occur such as with lifesup-
port systems or aircraft control systems). For such applications, consult our sales department.
■ The performance, characteristics, and features of the products described in this catalog are based
on the products working alone under prescribed conditions. Data listed here is not intended as a
guarantee of performance when working as part of any other product or device. In order to detect
problems and situations that cannot be predicted beforehand by evaluation of supplied data, please
always perform necessary performance evaluations with these devices as part of the product that
they will be used in.
■ When using the products listed in this catalog, please always be sure to try to prevent any possible
accidents or injury by designing products in a careful and safe manner. If you have any questions
concerning the use of these products, please contact any of our sales representatives.
■ For any products listed in this catalog that may constitute restricted trade goods under overseas
exchange or service trade laws, permission to deliver according to law may be required before
importing.
■ Unauthorized duplication of this catalog in part or in whole is forbidden.
■ Please understand that we cannot be held responsible for any damages to the industrial properties
of any third party that arise from the use or application of the products listed in this catalog, with
the exception of those items directly related to method of construction.
ISO Certificates
IATF 16949
Masuda Plant ･ Headquarter
Certificate Number YKA 4005246/TS-A
lzumo Plant ･ Headquarter
Certificate Number YKA 4005246/TS-B
SUN Electronic (Nantong) Co.,Ltd.
Certificate Number 10151345
ISO 9001
lzumo Plant ･ Masuda Plant ･ Headquarter Certificate Number YKA 4005246
SUN Electronic (Nantong) Co., Ltd. Certificate Number 10151343
ISO 14001
lzumo Plant ･ Masuda Plant Certificate Number E0792
SUN Electronic (Nantong) Co., Ltd. Certificate Number 01217E20812R4M
INDEX
About SUNCON capacitors
Series Line-up · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 2
Series Chart · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4
Guidelines and Precautions for Use · · · · · · · · · · · · · · · · · · · · · · · · · · 5
Conforming to environment / Intellectual Property Rights /
Surface Mount Type Recommended Land Pattern · · · · · · · · · · · · 9
Soldering Condition / Reflow Soldering Condition · · · · · · · · · · · · · · 10
Packaging Specifications · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 11
Ripple Current Frequency Coefficient · · · · · · · · · · · · · · · · · · · · · · 14
CA type HA type Anti-vibration Structure · · · · · · · · · · · · · · · 15
Aluminum Electrolytic Capacitors with

Hybrid Conductive Polymer ······ 16
Aluminum Electrolytic Capacitors · · · · · · · · · · · · · · · · · · · · · · · · · 37
EOL Notice
Please place your orders with the suggested alternative series.
Discontinued alternative
series series Features
HVB HVBF Hybrid Conductive Polymer, 125°
C
CE-EX HVA Hybrid Conductive Polymer, Low ESR
CE-GS CE-GA Surface mount type, 5.4mm height, low impedance
CE-GX CE-AX Surface mount type, low impedance
CE-FC CE-FD, LD Surface mount type, 4.5mm height
CE-PX CE-PC Surface mount type, 125°

C
MV(ME)-FA ME-CZ 105°

C Standard
ME-FZ ME-WA Low impedance, High ripple Long life
1
Series Line-up
■ Hybrid Conductive Polymer Type
Appearance
Category Rated
Marking
ＡＥＣ−Ｑ２００
Rated Voltage
External
Solvent
High Cap.
Page
Color
Proof
Temperature Capacitance
Long
Classification Series Features
ESR
Low
Life
Range（V.DC）
Range（℃） Range（μF）
H V A 18 105℃ ● ● ● ● −55 to +105 6.3 to 16 10 to 1000 ―― Blue

H V B F 19 125℃ ● ● ● −55 to +125 6.3 to 16 33 to 1000 ―― Blue
H V H 20 105℃ ● ● ● ● −55 to +105 16 to 125 6.8 to 560 ―― Blue
H V P 21 125℃ ● ● ● −55 to +125 16 to 125 6.8 to 560 ―― Blue
H V T
Surface Mount Type
22 135℃ ● ● ● ● −55 to +135 25 to 63 10 to 330 ―― Blue

H V J 23 150℃ ● ● ● ● −55 to +150 25 to 63 15 to 330 ―― Blue
H V H Z 24 105℃ High Ripple ● ● ● −55 to +105 16 to 40 18 to 560 ―― Blue
H V P Z 25 125℃ High Ripple ● ● ● −55 to +125 16 to 40 18 to 560 ―― Blue
H V H F 26 105℃ High Capacitance ● ● ● ● ● −55 to +105 25 to 100 10 to 470 ―― Blue
H V P F 27 125℃ High Capacitance ● ● ● ● ● −55 to +125 25 to 100 10 to 470 ―― Blue
UP
GRADE H V P X 28 125℃ High Ripple ● ● ● ● −55 to +125 25 to 80 22 to 470 ―― Blue
UP
GRADE H V T X 29 135℃ High Ripple ● ● ● ● −55 to +135 25 to 35 47 to 470 ―― Blue
NEW H V P Y 30 125℃ High Ripple ● ● ● ● −55 to +125 25 to 35 270 to 470 ―― Blue
NEW H V T Y 31 135℃ High Ripple ● ● ● ● −55 to +135 25 to 35 270 to 470 ―― Blue
H V P C 32 125℃ High Ripple, High Cap. ● ● ● ● ● −55 to +125 25 to 35 180 to 560 ―― Blue
H E H ★ 105℃ ● ● ● ● −55 to +105 16 to 100 10 to 560 ―― Blue
Radial Lead Type
H E H Z 33 105℃ High Ripple ● ● ● −55 to +105 16 to 40 27 to 560 ―― Blue

H E P Z 34 125℃ High Ripple ● ● ● −55 to +125 16 to 40 27 to 560 ―― Blue
H E H F 35 105℃ High Capacitance ● ● ● ● ● −55 to +105 25 to 100 10 to 470 ―― Blue
H E P F 36 125℃ High Capacitance ● ● ● ● ● −55 to +125 25 to 100 10 to 470 ―― Blue
■ Aluminum Electrolytic Type
Appearance
Category Rated
Marking
ＡＥＣ−Ｑ２００
Rated Voltage
Impedance
External
Solvent
Thin type
Page
Color
Small &
Proof
Long

Life
Range（V.DC）
Low
CE-BE 38 Super Low Profile 3.9mm Height ● ● ● −40 to +85 4 to 50 1.0 to 180 ―― Black
CE-BD 39 Low Profile 4.5mm Height ● ● ● −40 to +85 4 to 50 0.47 to 220 ―― Black
CE-BS 40 Standard ● ● −40 to +85 4 to 100 0.47 to 6800 ―― Black
CE-BSS 42 Small, Standard ● ● ● −40 to +85 6.3 to 50 4.7 to 220 ―― Black
CE-FE 43 105℃ 3.9mm Height ● ● ● −40 to +105 6.3 to 50 1.0 to 100 ―― Black
CE-FD ★ 105℃ 4.5mm Height ● ● ● −40 to +105 6.3 to 50 0.47 to 100 ―― Black
CE-LD 44 4.5mm Height, Long Life ● ● ● ● −40 to +105 6.3 to 50 0.47 to 100 ―― Black
105℃ Small,
CE-FSS 45 High Capacitance ● ● ● −40 to +105 6.3 to 50 4.7 to 220 ―― Black
● ● −55 to +105 6.3 to 63 0.47 to 12000
46
CE-FS 105℃ Standard ● ● −40 to +105 100 1.0 to 330 ―― Black
48 ● −40 to +105 160 to 400 2.2 to 82
CE-FH
Surface Mount Type
49 Long Life ● ● −40 to +105 6.3 to 50 1.0 to 4700 ―― Black

CE-AX 50 Low Impedance ● ● ● ● −55 to +105 6.3 to 50 4.7 to 6800 ―― Black
CE-KX 52 Low Impedance ● ● ● −55 to +105 6.3 to 100 2.2 to 6800 ―― Black
CE-ZX 54 Super Low ESR ● ● ● −55 to +105 6.3 to 50 33 to 1800 ―― Black
UP Super Low ESR,
GRADE CE-ZC 55 Small, High Capacitance ● ● ● ● −55 to +105 6.3 to 50 68 to 2200 ―― Black
CE-LX 56 Low Impedance, Long Life ● ● ● −55 to +105 6.3 to 100 4.7 to 12000 ―― Black
5.4mm Height,
CE-GA 58 Low Impedance ● ● ● ● −55 to +105 6.3 to 63 1.0 to 220 ―― Black
CE-LS 59 Low Impedance, Long Life ● ● ● −40 to +105 6.3 to 50 10 to 330 ―― Black
60 ● ● ● −40 to +105 6.3 to 50 1.0 to 220
CE-LH Long Life ―― Black
61 ● −40 to +105 160 to 400 2.2 to 120
CE-LL 62 Low Impedance, Long Life ● ● ● ● −40 to +105 6.3 to 50 10 to 1000 ―― Black
CE-LF 63 Low Impedance, Long Life ● ● ● ● −40 to +105 16 to 50 100 to 470 ―― Black
CE-PC 64 125℃ ● ● ● −55 to +125 6.3 to 100 2.2 to 4700 ―― Black
UP 125℃ Low ESR,
GRADE CE-PH 66 High Capacitance ● ● ● ● −40 to +125 16 to 63 10 to 3900 ―― Black
CE-PS 68 125℃ High Capacitance ● ● ● ● −40 to +125 16 to 35 47 to 610 ―― Black
125℃ Long Life,
CE-PF 69 High Ripple ● ● ● −40 to +125 25 to 35 100 to 330 ―― Black
CE-TH 70 135℃ ● ● ● −40 to +135 16 to 50 22 to 1000 ―― Black
CE-JX 71 150℃ ● ● ● −40 to +150 25 to 35 100 to 470 ―― Black
CE-NP 72 Bi-polar ● ● −40 to +85 6.3 to 50 1.0 to 100 ―― Black
CE-FN 73 105℃ Bi-polar ● ● −55 to +105 6.3 to 63 1.0 to 47 ―― Black
Please refer to http://www.sunelec.co.jp for the information where ★ marking is indicated.
2
Series Line-up
Appearance
Category Rated
Marking
Rated Voltage
Impedance
External
Thin type
Solvent
Page
Color
Small &
Proof
Long
Life
Range（V.DC）
Low
ME-UW ★ 5mm Height ● ● −40 to +85 4 to 50 10 to 330 Black White

ME-SWB 74 7mm Heigh ● ● −40 to +85 4 to 63 1.0 to 470 Black White
5mm Height,
ME-UZ 75 Temperature of Wide Range ● ● −55 to +105 6.3 to 50 10 to 220 Green White
7mm Height,
ME-SZ 75 Temperature of Wide Range ● ● −55 to +105 6.3 to 50 1.0 to 330 Green White
ME-UAX 76 5mm Height, Low Impedance ● ● ● −55 to +105 6.3 to 35 33 to 220 Green Gold
ME-SAX 76 7mm Height, Low Impedance ● ● ● −55 to +105 6.3 to 35 4.7 to 330 Green Gold
ME-SWG 77 7mm Height, Low ESR ● ● −40 to +105 6.3 to 35 22 to 330 Black Gold
ME-HC 78 Standard ● ● −40 to +85 6.3 to 100 2.2 to 15000 Black White
ME-LS 79 Long Life, High Reliability ● ● ● −40 to +105 6.3 to 50 1.0 to 1000 Black Silver
Small Standard,
ME-CZ 80 Temperature of Wide Range ● ● −55 to +105 6.3 to 100 2.2 to 15000 Green White
ME-CA 82 Small Standard, Low Impedance ● ● ● −55 to +105 6.3 to 50 2.2 to 15000 Green Silver
ME-CX 84 Small, Low Impedance ● ● ● −55 to +105 6.3 to 35 47 to 15000 Green Gold
−55 to +105 6.3 to 63 4.7 to 12000
ME-AX 86 Low Impedance, Long Life ● ● ● Green Gold
−40 to +105 100 5.6 to 470
Radial Lead Type
ME-WX 88 Low Impedance, High Ripple ● −40 to +105 6.3 to 50 22 to 6800 Green Gold
Low Impedance, High Ripple,
ME-WA 90 Long Life ● ● −40 to +105 6.3 to 63 82 to 8200 Black Gold
ME-WL 92 Low Impedance, Long Life ● ● ● −40 to +105 6.3 to 100 2.2 to 470 Green Silver
ME-WG 93 Super Low ESR ● −40 to +105 6.3 to 25 220 to 3300 Green Gold
ME-FX 94 Long Life ● ● −40 to +105 10 to 100 2.2 to 470 Black White
ME-PX 95 125℃ ● ● ● −55 to +125 10 to 100 10 to 4700 Clear Green Black
Standard
−40 to +85 160 to 250 0.47 to 220
ME-HPC 96 (Mid. & High Voltage) Black White
−25 to +85 350 to 450 1.0 to 100
Low Profile
−40 to +85 160 to 250 47 to 220
ME-HPD 96 (Mid. & High Voltage) Black White
−25 to +85 350 to 450 10 to 68
Guaranteed 105℃
−40 to +105 160 to 400 0.47 to 220
ME-FC 97 (Mid. & High Voltage) Black White
−25 to +105 450 22 to 47
105℃, Low Profile

−40 to +105 160 to 400 22 to 220
ME-FD 97 (Mid. & High Voltage) Black White
−25 to +105 450 10 to 33
105℃, Long Life

−40 to +105 160 to 400 4.7 to 220
ME-FH 98 (Mid. & High Voltage) ● Black White
−25 to +105 450 6.8 to 68
ME-SWN 99 7mm Height, Bi-polar ● ● −40 to +85 6.3 to 50 1.0 to 47 Black White
ME-HWN 100 Small, Standard, Bi-polar ● ● −40 to +85 6.3 to 100 1.0 to 2200 Black White
Please contact us for AEC-Q200 requirements.

Please refer to http://www.sunelec.co.jp for the information where ★ marking is indicated.
3
Series Chart
■ Hybrid Conductive Polymer Type

SURFACE MOUNT TYPE RADIAL LEAD TYPE
P.25 P.24 P.34 P.33
HVPZ* HVHZ* HEPZ* HEHZ*
125℃,High Ripple 105℃,High Ripple 125℃,High Ripple 105℃,High Ripple
16V to 40V 16V to 40V 16V to 40V 16V to 40V
P.23 P.22 P.21 P.20 ★

HVJ* HVT* HVP* HVH* HEH*
150℃ 135℃ 125℃ 105℃ 105℃
25V to 63V 25V to 63V 16V to 125V 16V to 125V 16V to 100V
NEW P.31 NEW P.30 P.36 P.35

HVTY* HVPY* HEPF* HEHF*
135℃,High Ripple 125℃,High Ripple 125℃ High Cap. 105℃ High Cap.
P.29 P.28 P.27 P.26

HVTX* HVPX* HVPF* HVHF*
135℃,High Ripple 125℃,High Ripple 125℃ High Cap. 105℃ High Cap.
P.32 P.19 P.18

HVPC* HVBF* HVA*
125℃ High Cap. 125℃ 105℃
25V to 35V 6.3V to 16V 6.3V to 16V

SURFACE MOUNT TYPE P.54 P.55
CE-ZX* CE-ZC* BI-POLAR
Super Low ESR Small, Low ESR
P.73
P.52-53 P.56-57 P.62 P.63 CE-FN*
CE-KX* CE-LX* CE-LL* CE-LF* 105℃
Low Z Low Z, Long Life Low Z, Long Life Low Z, Long Life
P.72
P.50-51 P.59 CE-NP*
CE-AX* CE-LS* Standard
Low Z Low Z, Long Life
P.68 P.58
MID.&HIGH
CE-PS* CE-GA* VOLTAGE
125℃ High Capacitance Low Z, L=5.4
P.61
P.69 P.40-41 P.42 P.39 P.38
CE-LH
CE-PF* CE-BS* CE-BSS* CE-BD* CE-BE* 105℃ 5000h
Long Life,High Ripple Standard Small 4.5mm Height 3.9mm Height
P.48
P.71 P.70 P.66-67 P.46-47 P.45 ★ P.43 CE-FS
CE-JX* CE-TH* CE-PH* CE-FS* CE-FSS* CE-FD* CE-FE* 105℃ 2000h
150℃ 135℃ Low ESR,High Capacitance 105℃ 105℃ Small 105℃ 4.5mm Height 105℃ 3.9mm Height
P.64-65 P.49 P.60 P.44

CE-PC* CE-FH* CE-LH* CE-LD*
125℃ 105℃ Long Life 105℃ Long Life 105℃ Long Life
RADIAL LEAD TYPE

P.90-91 P.92
ME-WA ME-WL BI-POLAR
Low Z・ESR Low Z
P.99
P.95 P.86-87 P.88-89 P.93 ME-SWN*

L=7
ME-PX* ME-AX* ME-WX ME-WG
125℃ 4000h Low Z, Long Life Low Z・ESR Super Low Z・ESR P.100
P.84-85 P.77
ME-HWN*
Standard
ME-CX* ME-SWG*
Small, Low Z Low ESR, L=7
P.82-83 P.76 P.76

MID.&HIGH
VOLTAGE
ME-CA* ME-SAX* ME-UAX*
Small, Low Z Low Z, L=7 Low Z, L=5 P.98
P.94 P.80-81 P.79 P.75 P.75

ME-FH
105℃ 12000h
ME-FX* ME-CZ* ME-LS* ME-SZ* ME-UZ*
105℃ 10000h 105℃ Small 105℃ 3000h 105℃ L=7 105℃ L=5 P.97
ME-FC・FD
P.78 P.74 ★ 105℃ 2000h
ME-HC* ME-SWB* ME-UW*
Standard L=7 L=5 P.96
ME-HPC・HPD
*Please refer to http://www.sunelec.co.jp for the information where ★ marking is indicated.
solvent proof
85℃ 2000h
4
Guidelines and Precautions for Use
For using aluminum electrolytic capacitors (hereafter "capacitor/capacitors"), please pay attention to the guide-
lines listed below.
For circuit design
1) Please make sure that the operating condition and the mounting condition are within the rated value which
is described in the catalog or the specification.
2) Please make sure that the operating temperature and the operating ripple current are within the rated value
which is described in the catalog or the specification.
a) The operating temperature affects the lifetime of the capacitor. Generally speaking, the expected lifetime
of the capacitor is 2times longer by each 1OdegC reduction. Please use the capacitor within the upper
limit of the category temperature.
b) Do not apply an excessive ripple current (higher than the rated ripple current) to the capacitor. An excessive
ripple current may cause abnormal heating which leads to a damage or a shortening lifetime of the capaci-
tor. Please use the capacitor within the rated ripple current described in the catalog or the specification.
3) Please choose a capacitor which meets the designed lifetime of the application.
4) The capacitor has a polarity. Do not apply a reverse voltage or an alternating current voltage to the capaci-
tor. Please use the bi-polar capacitor for the circuit which polarity may change or be unstable. Do not use
the bi-polar capacitor in an alternating current circuit.
5) Do not use the general-purpose capacitor for the circuit which has a repeat of a rapid charge and discharge.
Please contact us if the capacitor is exposed in a repeat of a rapid charge and discharge.
6) Do not apply an excessive voltage (higher than the rated voltage) to the capacitor.
7) The exterior sleeve of the capacitor is not insulated. Do not place the capacitor where insulation is required.
The case of the capacitor is not insulated. Please make sure that the case of the capacitor is insulated from
the circuit pattern and the lead-wires.
8) Do not use the capacitor in the environments listed below.

a) In the environment where the capacitor is exposed in water, salt water, oil or where condensation may occur.
b) In the environment where poisonous gas (hydrogen sulfide, sulfurous acid, nitrous acid, chlorine, ammonia, etc) is filled in atmosphere.
c) In the environment where ozone, ultra-violet, radiation are irradiated.
d) In the environment where the capacitor is exposed in the vibration or physical shock which is severer than
the range defined in the catalog or the specification.
9) For mounting the capacitor, please follow the guidelines listed below.
a) Please make sure that the hole space of the circuit board matches the lead-wire space of the capacitor.
b) Please make sure that the space above the pressure relief vent is greater than the value listed below.
Cace Diameter Space

φ6.3 to φ16 2mm or more
φ18 3mm or more
c) Please make sure that the circuit wires or the circuit pattern is not located above the pressure relief vent.
d) If the distance between the top of the capacitor and the circuit board above the capacitor is shorter than
the listed in 9.b, please make a hole in the board in order to relieve a gas from the pressure relief vent.
10) Design the circuit pattern so that the sealing rubber will not be placed on it.
5
11) Do not place heat-generating devices around the capacitor.

Do not place heat-generating devices on the other side of the capacitor.
12) Please refer to "surface mount type recommended land pattern" in the catalog or the specification.
13) For circuit design, please follow the guidelines listed below.
a) Temperature and/or the frequency of a ripple current affect the electrical characteristics of the capacitor.
Please consider the variation of the electrical characteristics for the circuit design.
b) For mounting the capacitor on a double-sided circuit board, do not place the capacitor on excessive holes
of the circuit board.
c) When the multiple capacitors are connected in parallel, please consider the current balance for the capacitors.
d) When the multiple capacitors are connected in series, please put resistors (voltage divider) in parallel to
keep the voltage balance for the capacitors.
Mounting
1) Do not reuse the capacitor which has been mounted and electrically loaded on the circuit board.
2) A transient recovery voltage may occur in the capacitor. In this case, please discharge the capacitor
through a 1k ohm resistor.
3) A high leakage current may occur after the capacitor stores for a long period.
Please apply voltage to the capacitor through a 1k ohm resistor.
4) Please check the rated capacitance and the rated voltage of the capacitor before mounting on the circuit board.
5) Please check the polarity of the capacitor before mounting on the circuit board.
6) Do not drop the capacitor on the floor. Do not use the capacitor which has been dropped on the floor.
7) Do not deform the capacitor.
8) Do not apply a force which causes a break of the case of the capacitor.
9) Please make sure that the hole space of the circuit board matches the lead-wire space of the capacitor.
10) Please adjust the clinch force of an automatic insertion machine in order to avoid excessive stress to the
lead-wires of the capacitor.
11) Do not apply an excessive impact to the capacitor by the suction nozzle of an automatic insertion machine
or a chip mounter also the impacts by a component checker or a centering operation.
12) For soldering by a soldering iron, please check the guidelines listed below.
a) Please make sure that the soldering condition (temperature and duration) is within the range defined in
the catalog or the specification.
b) If the hole space of the circuit board does not match the space of the lead-wires of the capacitor, please
apply a lead-wire forming before soldering. Do not apply an excessive stress to the capacitor when applying
a lead-wire forming.
c) Do not reuse the capacitor which has been mounted on a circuit board.
d) Do not let the tip of a soldering iron contact on the body of the capacitor.
6
13) For flow soldering, please follow the guidelines listed below.
a) Do not soak the body of the capacitor in a melted solder. Please make sure that the soldering is performed
on the other side of the capacitor.
b) Please make sure that the soldering conditions (preheating, solder temperature, soak duration) are within
c) Do not leave flux on the body of the capacitor.
d) Do not let the metallic lead-wires of the other components contact on the capacitor.
14) For reflow soldering, please follow the guidelines listed below.
a) Please make sure that the soldering conditions (preheating, solder temperature, duration) are within the
range defined in the catalog or the specification.
b) Do not apply excessive heating to the capacitor when using an infrared heater. The color or/and the mate-
rial of the capacitor affect the absorption of infrared ray.
c) Cracks of the ink (for indicating the cathode polarity) may occur, however the cracks do not affect the
reliability of the capacitor.
15) Do not apply any mechanical stress listed below to the capacitor after mounting on the circuit board.
a) Do not tilt, lean, twist the capacitor.
b) Do not use the capacitor as a grip for moving a circuit board manually.
c) Do not hit the capacitor. When stacking circuit boards, do not let the capacitor contact a circuit board or
the other components.
16) For washing a printed circuit board. Do not wash the capacitor with a halogen-containing solvent. The
solvent-proof capacitor must be used when washing is required. Please make sure that the washing condi-
tion is within the range defined in the catalog or the specification. The capacitor may fail due to a type of
washing solvent. Please pay attention to the risks listed below.
a) A halogen-containing solvent may cause electrochemical corrosion in the capacitor.
b) An alkali-containing solvent may cause corrosion (dissolution) of the aluminum case of the capacitor.
c) Xylene may cause degradation of the sealing rubber.
d) Acetone may cause a loss of the ink.
e) A terpene/petroleum-containing solvents may cause degradation of the sealing rubber.
17) For washing the solvent-proof capacitor, please follow the guidelines listed below.
a) Please control the conductivity, pH, specific gravity, moisture content, etc of a washing solvent.
b) Do not store the capacitor where a washing solvent is vaporized or in an airtight enclosure. Do not dry the
capacitor or the circuit board by heat higher than the upper limit of the operating temperature.
18) Do not use a glue and/or a coating material including halogen.
19) For using a glue and/or a coating material, please follow the guidelines listed below.
a) Do not leave flux or a stain between the capacitor and the circuit board.
b) Please dry out a washing solvent before using a glue and/or a coating material. Do not cover the sealing
rubber of the capacitor by a glue and/or a coating material.
c) Please make sure that the thermal curing condition for a glue and/or a coating material is within the rated
value which is described in the catalog or the specification.
During use in application
1) Do not touch the capacitor.
2) Do not make a short-circuit between the lead-wires by a conductive material. Do not expose the capacitor
in a liquid/conductive solution.
7
3) For mounting the circuit board, please follow the guideline listed below. Do not use the devise in the follow-
ing environmental conditions:
a) In the environment where the capacitor is exposed in water or oil.
b) In the environment where the capacitor is exposed in direct sunlight.
c) In the environment where the capacitor is exposed in ozone, ultraviolet ray, or radiation.
d) In the environment where poisonous gas (hydrogen sulfide, sulfurous acid, nitrous acid, chlorine, ammonia,
etc) is filled in atmosphere.
e) In the environment where the capacitor is exposed in the vibration or physical shock which is severer than
Maintenance
1) For industrial applications, please perform periodical inspections.
2) In periodical inspection, please check the points listed below.
a)Appearance (open-vent, a leakage of the electrolyte)
b) Electrical characteristics (leakage current, capacitance, dissipation factor, and the other items defined in
the catalog or the specification)
In case of a problem
1) If the safety-vent of the capacitor is opened and a gas relive from it, please turn off the main power supply
of the application or plug off the power code from an outlet.
2) A high temperature gas over +1OOdegC may come from the safety-vent of the capacitor. Leave the body
from the capacitor. If a gas from the capacitor happen to coming into the eyes, please wash the eyes with
water immediately. If a gas from the capacitor happen to coming into the mouth, please gargle the mouth
with water immediately. Do not lick the electrolyte of the capacitor. If the electrolyte of the capacitor is
touched on the skin, please rinse it out with a soap and water.
Storage conditions
1) Do not store the capacitor in high temperatures and/or in high humidity. Please store the capacitor at room
temperature between 5 and 35degC in relative humidity below 75%. Please use the capacitor within one
year after the shipment.
2) Do not store the capacitor in the environment where it is exposed in water, oil, or salt water.
3) Do not store in the environment where poisonous gas (hydrogen sulfide, sulfurous acid, nitrous acid,
chlorine, ammonia, etc) is filled in atmosphere.
4) Do not store in the environment where the capacitor is exposed in ozone, ultraviolet ray, or radiation.
Scrap of capacitors
For scraping the capacitor, please follow the guideline listed below.
a) Please make a hole in the capacitor or crush the capacitor before burning it.
b) If not, please ask waste-disposal specialist to take care of them, such as burying in the ground.
AEC-Q200 Compatibility
AEC is an abbreviation of Automotive Electronics Council , and organization of American automotive manufacturers
and electronic component manufacturers for standardization of specification for reliability testing and qualification.
We offer variety of test data packages supporting compliance to AEC-Q200 (standard for reliability testing for qualification).
Please contact us for product details.
For important notice of using the aluminum electrolytic capacitors. we observe the guidelines of EIAJ
RCR-2367C "Safety Application Guide for fixed aluminum electrolytic capacitors for use in electronic equipment".
Please read carefully the guideline for details.
8
Conforming to environment / Intellectual Property Rights / Surface Mount Type Recommended Land Pattern
■ Conforming to environment
We encourage activities for protecting global environment. All our products are lead-free. The sleeve material
is PET or sleeve-less(HEH). Please contact us if details are required.
■ Environmental Products (Compliance of RoHS Directive)
Surface Mount Type Radial Lead Type

Aluminum Electrolytic Capacitors Aluminum Electrolytic Capacitors
Type code CE, HV★1 CE_T ME HE_T
(φ4 to φ12.5) (φ16, φ18)
Cross section
of lead wire
(Kind of plating)
Part number 10CE100LX 10CE4700LXT 10ME100AX 63HEH10MT

(example) （100μF／10V）（4700μF／10V）（100μF／10V）（10μF／63V）
Sleeve Not used Not used PET Not used
Moisture Sensitivity Not applicable Not applicable Not applicable Not applicable
Level(MSL)★2 No need dry package No need dry package No need dry package No need dry package
★1 Sn plating lead-wire for Surface Mount Type : CE_T , HV_T

★2 Conforming to IPC/JEDEC J-STD-020
■ Conforming to RoHS
The capacitors do not intentionally contain the banned substances (Cd, Pb, Hg, Cr(Ⅵ), PBB, PBDE, DEHP,
BBP, DBP, DIBP) listed in RoHS directrive : (EU) 2015/863 and its concentration is less than the threshold
values.
■ Conforming to European REACH Regulation.

Our products are "articles without any intended releas" besed or RIP3.8TGD published on 26 May 2008.
They are not applicable for "Registration" for European REACH Regulation Article 7 (1).
■ Intellectual Property Rights

We proactively work on protecting the intellectual property rights of our products.
Examples of the patents related to our aluminum electrolytic capacitors with hybrid
conductive polymer( ).
JP. Pat. No.4911509, JP. Pat. No.4916416, JP. Pat. No.5305569
US. Pat. No.7497879, US. Pat. No.7859829, US. Pat. No.7872858
■ Surface Mount Type Recommended Land Pattern
●Land pattern (Unit:mm)

Size a b c
φ4 1.0 2.6 1.8
φ5 1.4 3.0 1.8
φ6.3 1.8 3.6 1.8
φ8 2.8 4.1 2.1
φ10 4.3 4.4 2.5
φ12.5 4.3 5.8 2.5
φ16 6.6 6.5 5.0
φ18 6.6 7.7 5.0
(1)Please refer to page 15 for S.M.T Recommended Land Pattern of Anti-vibration Structure(CA Type, HA Type).
(2)Please make your land pattern area as large as possible to prevent a large surface mount type from peeling off a circuit
board for anti-vibration.
9
Soldering Condition / Reflow Soldering Condition
■ Soldering Condition
・Soldering with a soldering iron : within 3 seconds at 350℃ unless otherwise specified in the spec.
・Flow soldering : within 10 seconds at 260℃ unless otherwise specified in the spec.
(Do not flow soldering with SMD type.)
・Thermal curing oven : within 2 minutes at below 150℃ ambient
■ Reflow Soldering Condition
●Profile 1 ●Profile 2
AIR reflow and IR reflow AIR reflow and IR reflow
(℃)
(℃)
. .
. .
.
(s) (s)
Preheat ; 150℃ to 180℃, Within 120sec. Preheat ; 150℃, Within 120sec.
Peak
Voltage Time for more Time for more Time for more Reflow
Series Size temperature Profile
(V) than 200℃ (t) than 217℃ (t1) than 230℃ (t2) cycle
Within 5sec.(T)
φ4 to φ6.3 Within 70sec. Within 60sec. Within 40sec. 250℃ 2 1
φ8 Within 60sec. Within 50sec. Within 30sec. 245℃ 2 1
4 to 63
φ10, φ12.5 Within 50sec. Within 40sec. Within 20sec. 240℃ 2 1
CE-BS, CE-BSS
φ16, φ18 Within 50sec. Within 30sec. Within 15sec. 235℃ 2 1
CE-FS, CE-FSS
φ4 to φ6.3 Within 60sec. Within 50sec. Within 40sec. 250℃ 2 1
CE-FH, CE-GA
CE-AX, CE-KX
80 to 100 φ10 Within 50sec. Within 30sec. Within 20sec. 240℃ 2 1
CE-LH, CE-LL
φ12.5 Within 50sec. Within 30sec. Within 20sec. 235℃ 2 1
CE-LF, CE-NP
CE-FN
160 to 400 φ12.5 Within 45sec. Within 20sec. Within 10sec. 235℃ 2 1
φ16, φ18 Within 30sec. Within 15sec. ― 230℃ 2 2
φ4 to φ8 Within 80sec. Within 70sec. Within 40sec. 260℃ 2 1
φ10×10.2 to 13.5 Within 70sec. Within 60sec. Within 40sec. 250℃ 2 1
6.3 to 50
φ10×7.7, φ16, φ18 Within 50sec. Within 40sec. Within 20sec. 240℃ 2 1
CE-ZX, CE-ZC
CE-LX, CE-LS
CE-PC, CE-PH 63
φ10, φ12.5 Within 50sec. Within 40sec. Within 20sec. 240℃ 2 1
CE-PS, CE-PF
CE-TH, CE-JX
80 to 100
CE-BD, CE-FD, CE-LD ALL ALL Within 60sec. Within 50sec. Within 30sec. 245℃ 2 1
CE-BE, CE-FE ALL ALL Within 50sec. Within 40sec. Within 20sec. 240℃ 2 1
The maximum cycle of reflow soldering is two times. The second cycle must be done after sufficient cooling time for more than
one hour to return the temperatures of circuit boards and components back to room temperature.
Please refer to page 17 for reflow soldering condition of EP-cap.
10
Packaging Specifications
■ Surface Mount Type Taping Specifications (Unit:mm)

Carrier tape φD≤10 φD≥12.5
(Unit:mm)
size(φD×L) Y±0.3 H±0.2 W±0.2 P±0.1 E±0.1 F±0.1 T±0.2 S±0.1

φ4×4.5 12.0 4.7 4.7 8.0 1.75 5.5 5.0 ー
φ4×5.4 12.0 4.7 4.7 8.0 1.75 5.5 5.8 ー
φ4×6.0 12.0 4.7 4.7 8.0 1.75 5.5 6.4 ー
φ5×3.9 12.0 5.7 5.7 12.0 1.75 5.5 4.5 ー
φ5×4.5 12.0 5.7 5.7 12.0 1.75 5.5 5.0 ー
φ5×5.4 12.0 5.7 5.7 12.0 1.75 5.5 5.8 ー
φ5×6.0 12.0 5.7 5.7 12.0 1.75 5.5 6.4 ー
φ5×7.0 12.0 5.7 5.7 12.0 1.75 5.5 7.1 ー
φ6.3×3.9 16.0 7.0 7.0 12.0 1.75 7.5 4.5 ー
φ6.3×4.5 16.0 7.0 7.0 12.0 1.75 7.5 5.1 ー
φ6.3×5.4 16.0 7.0 7.0 12.0 1.75 7.5 5.8 ー
φ6.3×6.0 16.0 7.0 7.0 12.0 1.75 7.5 6.5 ー
φ6.3×7.0 16.0 7.0 7.0 12.0 1.75 7.5 7.5 ー
φ6.3×7.7 16.0 7.0 7.0 12.0 1.75 7.5 8.2 ー
φ6.3×8.4 16.0 7.0 7.0 12.0 1.75 7.5 9.2 ー
φ8×10.2(10.5) 24.0 8.7 8.7 16.0 1.75 11.5 11.1 ー
φ10×7.7 24.0 10.7 10.7 16.0 1.75 11.5 8.3 ー
φ10×10.2(10.5) 24.0 10.7 10.7 16.0 1.75 11.5 11.2 ー
φ10×12.5 24.0 10.7 10.7 16.0 1.75 11.5 13.3 ー
φ10×13.5 24.0 10.7 10.7 16.0 1.75 11.5 14.6 ー
φ12.5×13.5 32.0 13.2 (13.9★) 13.2 (13.9★) 24.0 1.75 14.2 14.3 (14.7★) 28.4
φ16×16.5 44.0 17.5 17.5 28.0 1.75 20.2 17.3 (17.8★) 40.4
φ18×16.5 44.0 19.5 19.5 32.0 1.75 20.2 17.8 40.4
φ18×21.5 44.0 19.5 19.5 32.0 1.75 20.2 22.5 40.4
★ Anti-vibration Structure : CA Type
Reel dimensions (Unit:mm)
φ4, φ5 14
.
φ6.3 18
.
φ8, φ10 26
φ12.5 34
φ16, φ18 46
Minimum Packing Quantity

φD×L(mm) Quantity of 1 Reel(φ380) Quantity of 1 Reel(φ330) Quantity of 1 package(Reel)
φ4×4.5 2000 ー 5
φ4×5.4 2000 ー 5
φ4×6.0 2000 ー 5
Please place your orders with an
φ5×3.9 ー 1000 5
integral multiple of the minimum
φ5×4.5 ー 1000 5
φ5×5.4 ー 1000 5 packing quantity.
φ5×6.0 1000 ー 5
φ5×7.0 1000 ー 5
φ6.3×3.9 ー 1000 5 ★ "+D" has to be put after
φ6.3×4.5 ー 1000 5 the part number.
φ6.3×5.4 ー 1000 5 Example
φ6.3×6.0 1000 ー 5 25CE2200LXT+D
φ6.3×7.0 1000 ー 5
φ6.3×7.7 900 ー 5
φ6.3×8.4 800 ー 5
φ8×10.2(10.5) 500 ー 3
φ10×7.7 500 ー 3
φ10×10.2(10.5) 500 ー 3
φ10×12.5 400 ー 3
The suffix "+P" at the end of the
φ10×13.5 400 ー 3
φ12.5×13.5 250 ★ ー 2 part number indicates a plastic reel.
φ16×16.5 200 ★ ー 2 Example
φ18×16.5 175 ー 2 16CE470LX+P
φ18×21.5 125 ー 2 25CE2200LXT+DP
11
■ Radial Lead Type Taping Specifications for Automatic Inserting Machines

Fig.1
Fig.2
Fig.3
(Unit:mm)
φ6.3×5 φ6.3×5
φ5×11 φ12.5×20 φ16 φ5 φ6.3
Product Outer Dimensions φ4 to φ6.3×7 φ8 φ10 φ4 to φ5×7 φ6.3×7 φ8
φ6.3×11 φ12.5×25 ×25 ×11 ×11
φ6.3×7.5 φ6.3×7.5
Fig. No. 1 1 1 2 2 ★3 3 2 3 2 2
＋0.8
Lead wire interval F −0.2 ★1 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 3.5
Pitch between components P ±1.0 12.7 12.7 12.7 12.7 15.0 30.0 12.7 12.7 12.7 12.7 12.7
Sprocket hole pitch P0 ±0.2 12.7 12.7 12.7 12.7 15.0 15.0 12.7 12.7 12.7 12.7 12.7
P1 ±0.5 3.85 3.85 3.85 3.85 5.0 3.75 5.1 5.1 5.1 5.1 4.6
Sprocket hole position
P2 ±1.0 6.35 6.35 6.35 6.35 7.5 7.5 6.35 6.35 6.35 6.35 6.35
Lateral deviation Δh ±1.0 0 0 0 0 0 0 0 0 0 0 0
Carrier tape width W ±0.5 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0
Holding tape width W0 min. 6.0 6.0 6.0 6.0 11.5 11.5 6.0 6.0 6.0 6.0 6.0
Sprocket hole position W1 ±0.5 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0
Holding tape position W2 max. 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Component-base height H ±0.75★2 17.5 18.5 20.0 16.0 18.5 16.0 18.5 18.5 17.5 18.5 17.5 18.5 18.5 18.5 18.5
Lead wire clinch height H0 ±0.5 16.0 16.0 16.0 ーーーーーーーー
Sprocket hole diameter φD0 ±0.2 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0
Tape thickness(in total) t ±0.3 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6
Lead wire protrusion ℓ max. 0 0 0 0 0 0 0 0 0 0 0
Cut position of failures L1 max. 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0
Taping code(standard) Zig-Zag type ＋T ＋T ＋T ＋T ＋T0 ＋T ＋T0 ＋T ＋TS ＋TS0 ＋TS ＋TS0 ＋TS ＋TS ＋TS
Only straight taping for EP-cap. ★1 Fig.2, Fig.3:±0.5

The taping coad has to be put after the part number. ★2 φ10・φ12.5 with H＝18.5: ＋1.5
−0.5
Part number 16ME100HC＋T ★3 φ16 every two slots in Fig.2
Taping code
12 ＋T0, ＋TS0 (0＝Zero)
■ Radial Lead Type Lead-wire Process Standard Specification (Unit:mm)
1.Lead-wire forming 2.Lead-wire cutting

for φD=5,6.3,8mm.
.
(Unit:mm)
Lead-wire forming is unavailable for EP-cap.
φD 5 6.3 8 10 12.5 16 18
Lead-wire cutting for EP-cap is available only for 10mm diameter
case size of the following series. (HEH, HEHZ, HEPZ, HEHF, HEPF) F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
The following lead process symbols have to be put after the part number.
Please contact us if a different length of lead-wire is required.
+FA・・・・・・ for lead-wire forming
+CA・・・・・・ for lead-wire cutting
Example
16ME1OOHC+FA
16OME22HPC+CA
■ Part number
Example
★3 Rated capacitance(μF)
6 CE 100 LX Symbol
Rated voltage Type code Rated capacitance symbol

0.47 R47
Series code
★1 ★2 ★3 1.0 1
4.7 4R7
10 HV A 47 M +P 10 10
Rated voltage Type code Series code Rated capacitance symbol Capacitance tolerance Reel code
★1 ★2 ★3 ★4
100 100
1000 1000
★1. 6 represents 6.3V as the rated voltage.
★2. Type code 10000 10000
CE, HV: Surface mount type
ME, HE: Radial lead type
CA, HA: Surface mount type (Anti-vibration structure)
★3. R represents the decimal point
★4. Only plastic reels are available for EP-cap.
■ Minimum Packing Quantity

● Bulk
Size Quantity Remarks reference
φ4 to φ8★1 500 PCS. ★1 φ8 X 12.5L to 20L ; 200 PCS.

φ10 to φ12.5★2 200 PCS. (ME-WA, ME-WG series Size φ8X11.5L ; 200 PCS.)
★2 φ12.5 X 30L ; 100 PCS.
φ16★3 100 PCS. ★3 φ16 X 35.5L ; 50 PCS.
φ18 50 PCS. Surface Mount Type ; Please refer to page11
● Taping
Size Quantity
φ4 4000 PCS.
φ5 3000 PCS.
φ6.3 2500 PCS.
φ8 1400 PCS.
φ10 900 PCS.
φ12.5 600 PCS.

Please place your orders with an integral multiple of the
φ16 250 PCS.
minimum packing quantity.
13
Ripple Current Frequency Coefficient
■ Ripple Current Frequency Coefficient

Frequency:F(Hz)
Series Capacitance:C(μF)
100≤F<1k 1k≤F<10k 10k≤F<100k 100k≤F
CE-BE, CE-BD C≤4.7 1.00 1.30 1.50 1.80

CE-BSS, CE-BS
CE-FE, CE-FD, CE-LD
4.7<C≤33 1.00 1.20 1.30 1.45
CE-FSS, CE-FS(6.3 to 1OOV)
CE-FH, CE-LH(6.3 to 50V)
CE-NP, CE-FN 33<C 1.00 1.10 1.20 1.30
C≤33 0.35 0.70 0.90 1.00

CE-AX, CE-KX
33<C≤150 0.40 0.85 0.92 1.00
CE-LX, CE-ZX
150<C 0.60 0.85 0.95 1.00
CE-ZC ALL 0.55 0.80 0.85 1.00
C≤1 0.07 0.55 0.85 1.00
1<C≤4.7 0.25 0.60 0.90 1.00
CE-GA
4.7<C≤47 0.45 0.75 0.92 1.00
47<C 0.60 0.85 0.92 1.00
CE-LS C≤22 0.50 0.80 0.90 1.00

CE-LL, CE-LF 22<C≤150 0.65 0.85 0.92 1.00
CE-PC 150<C 0.70 0.85 0.95 1.00
CE-PH, CE-PF
ALL 0.60 0.85 0.93 1.00
CE-PS, CE-TH, CE-JX
Frequency:F(Hz)
100≤F<1k 1k≤F<10k 10k≤F
C<100 1.00 1.30 1.50

ME-UW, ME-SWB
ME-HC, ME-HPC, ME-HPD
ME-FC, ME-FD, ME-FH 100≤C<1000 1.00 1.20 1.30
ME-SWN, ME-HWN
1000≤C 1.00 1.13 1.15
C≤68 0.50 0.80 1.00

ME-CX 68<C≤220 0.55 0.85 1.00
ME-AX 220<C≤1000 0.65 0.90 1.00
1000<C 0.75 0.90 1.00
C≤1 0.20 0.60 1.00
ME-CZ 1<C≤47 0.50 0.80 1.00
ME-CA 47<C≤220 0.55 0.85 1.00
ME-FX
220<C≤1000 0.65 0.90 1.00
1000<C 0.75 0.90 1.00
C<100 0.55 0.80 1.00
ME-PX 100≤C<1000 0.70 0.90 1.00
1000≤C 0.90 0.95 1.00
Frequency:F(Hz)
100≤F<1k 1k≤F<10k 10k≤F<100k 100k≤F
C≤47 0.40 0.80 0.90 1.00
ME-UAX
47<C≤100 0.60 0.80 0.95 1.00
ME-SAX
100<C 0.75 0.85 0.95 1.00
ME-UZ C≤4.7 0.50 0.65 0.95 1.00

ME-SZ 4.7<C≤33 0.60 0.75 0.95 1.00
ME-LS 33<C 0.75 0.85 0.95 1.00
ME-WX C≤33 0.40 0.65 0.90 1.00

ME-WA 33<C≤1200 0.50 0.80 0.93 1.00
ME-WL 1200<C 0.60 0.85 0.96 1.00
C≤820 0.45 0.80 0.94 1.00
ME-WG 820<C≤1800 0.50 0.85 0.96 1.00
1800<C 0.55 0.88 0.98 1.00
C≤56 0.22 0.45 0.65 1.00
ME-SWG
56<C 0.28 0.50 0.65 1.00
Frequency:F(Hz)
50 120 300 1k 10k≤F
CE-FS(160 to 400V)
ALL 0.75 1.00 1.20 1.30 1.50
CE-LH(160 to 400V)
Please refer to page 17 for Ripple Current Frequency Coefficient of EP-cap.
14
Anti-vibration Structure RoHS compliance
●
CA Type ・HA
Suitable for Automotive Applications
Type
■ Dimensions
0.3max. W
φD
(P)
C
H
L
R (＋) Support Terminals
(P)Reference size
A pressure relief vent is provided for φD=8 or bigger
(Unit : mm)
D±0.5 L W±0.2 H±0.2 C±0.2 R P

6.3 6.0±0.5 ★1 6.6 6.6 7.3 0.5 to 0.8 2.2
6.3 7.7±0.5 ★1 6.6 6.6 7.3 0.5 to 0.8 2.2
8 10.5±0.5 8.3 8.3 9.0 0.7 to 1.0 3.2
8 10.7±0.5 ★2 8.3 8.3 9.0 0.7 to 1.0 3.2
10 10.5±0.5 10.3 10.3 11.0 1.0 to 1.4 4.6
10 10.7±0.5 ★2 10.3 10.3 11.0 1.0 to 1.4 4.6
10 12.5±1.0 10.3 10.3 11.0 1.0 to 1.4 4.6
10 13.5±1.0 10.3 10.3 11.0 1.0 to 1.4 4.6
12.5 13.5±1.0 13.5 13.5 14.2 1.0 to 1.4 4.6
16 16.5±1.0 17.0 17.0 18.0 1.7 to 2.1 7.0
18 16.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0
18 21.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0
★1 Please contact us for applicable series.
★2 EP-cap, CA-ZX, CA-ZC, CA-LF, CA-PH, CA-PS, CA-PF, CA-TH, CA-JX
CA-FS（160 to 400V）, CA-LH（160 to 400V）
■ Surface Mount Type Recommended land pattern

Land pattern (Unit : mm)
(Anti-vibration Structure)
Size a b c
φ 6.3 1.6 4.0 3.0
φ 8 2.5 4.5 4.7
φ10 3.8 4.8 4.7
φ12.5 3.8 6.1 6.9
φ16 5.0 8.0 9.5
φ18 5.0 8.6 9.5
■ Part number CA Type HA Type

35 CA 1000 LX T 35 HA H 150 M +P
Sn plating terminal code Reel code
Series code Capacitance tolerance
Rated capacitance code Rated capacitance code
Type code(Anti-vibration Structure:CA) Series code
Rated voltage Type code(Anti-vibration Structure:HA)
Rated voltage
15
Hybrid Conductive Polymer Type
EP-cap is the first hybrid cathode aluminum electrolytic capacitors in the industry using a liquid
electrolyte and a high conductive polymer.
EP-cap is very low ESR (equivalent series resistance) at high frequencies comparing with the standard
aluminum electrolytic capacitors.
EP-cap has a self-healing mechanism of the dielectric due to a chemical reaction of the liquid electrolyte.
Soldering Condition
Reflow Soldering High voltage 125V, high reliability 135℃, high ripple current, long life (HVTYseries) and
Condition
Ripple Current Frequency
high temperature 150℃ (HVJ series) are ready in the line-up.
Coefficient
HVA
HVBF ■ Basic Construction

HVH ■ EP-cap ■ Electrolytic Capacitor
HVP Dielectric Dielectric
HVT
HVJ
Cathode
Cathode
HVHZ
Anode
Anode
HVPZ
HVHF
HVPF
HVPX
Electroconductive polymer+Electrolyte Electrolyte
HVTX
HVPY
■ Features
HVTY
● Low ESR ● Rated voltage up to 125V.
HVPC (Downsize and upgrade your circuit)
HEHZ
■ Excellent noise absorption capabilityat high ● 150°
C high temperature
frequency.
HEPZ ■ High ripple current. Suitable for smoothingin
switching regulators.
HEHF
● Applying a voltage up to the rated
● Excellent low temperature characteristics voltage is guaranteed.
HEPF ■ Stable performance at low temperatures ■ Voltage derating is not necessary
● Self-healing property of the liquid electrolyte ● RoHS compliance

■ Less possibility of a short-circuit than the solid (Environmental friendly)
polymer capacitors. Low leakage current.
■ Frequency characteristics
1
25HVHF220M
25CE220KX
ESR(Ω) at 20℃
0.1
0.01
100 1k 10k 100k 1M （Hz）
100 Frequency
■ Temperature characteristics
10
25HVHF220M
25CE220KX
ESR(Ω) at 100kHz
0.1
0.01
-60 -40 -20 0 20 40 60 80 100 120 （℃）
Temperature
16
Soldering Condition / Reflow Soldering Condition / Ripple Current Frequency Coefficient
Conductive Polymer
Capacitors with Hybrid
Aluminum Electrolytic
■ Soldering Condition
●Soldering with a soldering iron : within 3 seconds at 350℃ unless otherwise specified in the spec.
●Flow soldering : within 10 seconds at 260℃ unless otherwise specified in the spec.
(Do not flow soldering with SMD type.)
●Thermal curing oven : within 2 minutes at below 150℃ ambient
Soldering Condition
Reflow Soldering
Condition
■ Reflow Soldering Condition Ripple Current Frequency
Coefficient
HVA
●Profile 1 ●Profile 2 HVBF
AIR reflow and IR reflow AIR reflow and IR reflow HVH
HVP
( )
( )
HVT
HVJ
. . HVHZ
. .
HVPZ
. .
HVHF
HVPF
HVPX
HVTX
HVPY
( ) ( )
HVTY
Preheat ; 150℃ to 190°
C, Within 120sec. Preheat ; 160℃, Within 120sec. HVPC
HEHZ
HEPZ
HEHF
Voltage Time of more than Time of more than Time of more than Peak temperature Reflow
Series Size Profile
(V) 200℃(t) 217℃(t1) 230℃(t2) (T) cycle HEPF
HVA, HVBF 6.3 to 16 ALL Within 100sec. Within 80sec. Within 40sec. 250℃ ★1 2 1
HVH, HVP 16 to 63 φ6.3×6.0 to φ10 Within 100sec. Within 80sec. Within 40sec. 260℃ ★1 2 1
HVT, HVJ
HVHZ, HVPZ 80 to 125 ALL Within 100sec. Within 80sec. Within 40sec. 250℃ ★1 2 1
φ6.3 Within 70sec. Within 40sec. Within 30sec. 260℃ ★2 2 2
HVHF, HVPF
HVPX, HVTX 25 to 50 Within 70sec. Within 40sec. Within 30sec. 260℃ ★2 1 2
φ8 to φ10
HVPC, HVPY Within 70sec. Within 50sec. Within 40sec. 245℃ ★3 2 2
HVTY
63 to 100 ALL Within 70sec. Within 40sec. Within 30sec. 245℃ ★3 2 2
★1 Within 5sec.
In case two cycles of reflow soldering is allowed in the spec, the second reflow soldering ★2 Less than 260℃
must be done after natural air cooling for more than one hour in order to return the ★3 Less than 245℃
temperature of a circuit board and components to room temperature.
■ Ripple Current Frequency Coefficient
Capacitance : Frequency : F (Hz)

Series
C (μF) 100≦F＜1k 1k≦F＜5k 5k≦F＜10k 10k≦F＜20k 20k≦F＜30k 30k≦F＜40k 40k≦F＜50k 50k≦F＜100k 100k≦F＜500k
C≦10 0.03 0.20 0.35 0.50 0.60 0.65 0.70 0.75 1.00
10＜C≦100 0.05 0.30 0.45 0.60 0.70 0.80 0.85 0.85 1.00
HVA, HVBF
100＜C≦470 0.15 0.35 0.60 0.70 0.80 0.85 0.85 0.85 1.00
470＜C 0.15 0.45 0.65 0.75 0.85 0.85 0.85 0.90 1.00
HVH, HVP, HVT, HVJ C≦22 0.05 0.25 0.45 0.55 0.65 0.70 0.75 0.80 1.00
HVHZ, HVPZ, HVHF
HVPF, HVPX, HVTX 22＜C≦47 0.10 0.35 0.55 0.65 0.75 0.80 0.80 0.85 1.00
HVPY, HVTY 47＜C≦150 0.10 0.40 0.65 0.70 0.80 0.85 0.85 0.90 1.00
HEH, HEHZ, HEPZ
HEHF, HEPF 150＜C 0.15 0.45 0.65 0.75 0.80 0.85 0.85 0.90 1.00
HVPC 56≦C 0.15 0.35 0.55 0.65 0.75 0.80 0.85 0.85 1.00
A peak voltage with a ripple current shall be less than the rated voltage.
A peak voltage with a ripple current shall not be a reverse voltage.
17
Hybrid Conductive Polymer Type / Surface Mount Type RoHS compliance
Conductive Polymer
HVA
105℃ 3,000 to 5,000hours
●
Series
105℃
HVBF
（P.19）
125℃
● Solvent proof (within 2 minutes) HVA
● AEC-Q200
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Ripple Current Frequency Items Condition Specifications
Coefficient
Rated voltage (V) − 6.3 10 16
HVA
Surge voltage (V) Room temperature 8.2 13 20
HVBF
Category temperature range (℃) − −55 to ＋105
HVH
Capacitance tolerance (%) 120Hz/20℃ M : ±20
HVP
Dissipation Factor（tan δ） tanδ
（max.）120Hz/20℃ 0.18 0.16 0.14
HVT
Leakage current ★
（LC） μA/after 2minutes (max.) The greater value of either 0.2CV or 100
HVJ
Test φ6.3 : 3,000hours, D≥φ8 : 5,000hours
HVHZ
105℃ △C/C Within ±30% of the initial value
HVPZ rated voltage applied
Endurance tanδ Less than 200% of the specified value
HVHF (With the rated
ripple current) ESR Less than 200% of the specified value
HVPF
LC Less than the specified value
HVPX
★Please apply the rated voltage for 120 minutes at 105°
C in case the measured value is bigger than the specified value.
HVTX
HVPY
■ Marking, Dimensions (Unit : mm)
HVTY
Polarity 0.3max. W D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
HVPC (Cathode)
Lot No. 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
HEHZ 9D Rated Capacitance 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
47
HEPZ
φD
Series Symbol
8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
(P)
H
10 A
Rated Voltage(6.3V→6)
HEHF 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEPF L
R (＋)
(P)reference size
■ Size, ESR, Rated Ripple Current

V
μF 6.3 10 16
10 6.3×6.0 54 1130
22 6.3×6.0 54 1130
33 6.3×6.0 40 1510 6.3×6.0 54 1130
6.3×7.7 ★ 45 1480
47
6.3×6.0 40 1510 8×10.5 22 2290
68 6.3×6.0 40 1510 8×10.5 22 2290
6.3×7.7 ★ 35 1910
100
6.3×6.0 36 1630 8×10.5 18 2800 8×10.5 22 2290
6.3×7.7 ★ 35 1910
150
6.3×6.0 36 1630 8×10.5 18 2800 10×10.5 20 2920
6.3×7.7 ★ 32 2020
220
8×10.5 16 3150 8×10.5 18 2800
330 8×10.5 16 3150 8×10.5 18 2800
390 8×10.5 16 3150
470 8×10.5 16 3150 10×10.5 16 3650
560 8×10.5 16 3150 10×10.5 16 3650
680 10×10.5 15 3890
820 10×10.5 15 3890
1000 10×10.5 15 3890
Please refer to page 17 for ripple current frequency coefficients.
★S type Case size:φDxL(mm)
ESR(mΩ)max. at 100kHz, 20℃
Rated ripple current

mArms(100kHz, 105℃)
■ Part number
10 HV A 47 M +P 10 HV A 100 M S +P
Reel code Reel code
Capacitance tolerance S type code
Rated capacitance Capacitance tolerance
Series code Rated capacitance
Type code Series code
Type code
Rated voltage
Rated voltage
18
Conductive Polymer
HVBF
125℃ 1,500 to 2,000hours
●
Series
125℃
Solvent proof (within 2 minutes)

● HVBF
● AEC-Q200 125℃
HVA
（P.18）
■ Specifications Soldering Condition
Reflow Soldering
Condition
Items Condition Specifications Ripple Current Frequency
Coefficient
Rated voltage (V) − 6.3 10 16
HVA
Surge voltage (V) Room temperature 8.2 13 20
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.18 0.16 0.14
HVT
Leakage current ★
HVJ
HVHZ
rated voltage applied HVPZ
(With the rated HVHF
HVPF
HVPX
★Please apply the rated voltage for 120 minutes at 105°
C in case the measured value is bigger than the specified value.
HVTX
HVPY
HVTY
(Cathode) HVPC
Lot No. 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
9D HEHZ
Rated Capacitance 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
33
HEPZ
φD
Series Symbol
8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
(P)
H
16 B
10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6 HEHF
L HEPF
R (＋)
(P)reference size

V
μF 6.3 10 16
33 6.3×6.0 54 640
47 6.3×6.0 40 850 6.3×7.7 45 830
68 6.3×6.0 40 850
100 6.3×6.0 36 920 6.3×7.7 35 1020 8×10.5 22 1300
150 6.3×6.0 36 920 10×10.5 20 1650
220 6.3×7.7 32 1140
330 8×10.5 18 1580
560 8×10.5 16 1780 10×10.5 16 2060
1000 10×10.5 15 2200
Case size:φDxL(mm)

■ Part number mArms(100kHz, 125℃)
16 HV BF 33 M +P
Reel code
Capacitance tolerance
Rated capacitance
Series code
Type code
Rated voltage
19
Conductive Polymer
HVH
105℃ 4,000 to 10,000hours
●
Series
105℃
High Voltage, Long Life
HVP
（P.21）
125℃
High Ripple
● Solvent proof (within 2 minutes) HVHZ HVH
● AEC-Q200 （P.24） High Cap.
HVHF
（P.26）
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
Rated voltage (V) − 16 25 35 40 50 63 80 100 125
HVA Surge voltage (V) Room temperature 20 32 44 50 63 79 100 125 157
HVBF Category temperature range (℃) − −55 to ＋105
HVH Capacitance tolerance (%) 120Hz/20℃ M : ±20
HVP Dissipation Factor（tan δ） tanδ
（max.）120Hz/20℃ 0.16
≤ 63V The greater value of either 0.01CV
HVT Leakage current
（LC） μA/after 2minutes (max.)
80V ≤ The greater value of either 0.05CV or 100
HVJ
16V φ6.3 : 4,000hours, D≥φ8 : 7,000hours
HVHZ Test
25V≤ φ6.3 : 5,O00hours, D≥φ8: 10,000hours
105℃
HVPZ
rated voltage applied △C/C Within ±30% of the initial value
HVHF
Endurance (With the rated tanδ Less than 200% of the specified value
ripple current)
HVPF ESR Less than 200% of the specified value
HVPX LC Less than the specified value
HVTX
HVPY 0.3max. W
Polarity
(Cathode)
D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
HVTY Lot No. 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
9D Rated Capacitance
HVPC 33 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
(P)
H
Series Symbol
HEHZ 63 H
Rated Voltage
8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
HEPZ
10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
L
R (＋) 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEHF
HEPF (P)reference size
V
μF 16 25 35 40 50
6.3×6.0 ★ 120 980
10
6.3×7.7 80 1200
15 6.3×7.7 80 1200
18 6.3×6.0 110 1030
27 6.3×6.0 100 1080 6.3×7.7 70 1250
33 8×10.5 35 1670
47 6.3×6.0 60 1270 6.3×7.7 60 1300
56 8×10.5 32 1750 10×10.5 25 2320
68 6.3×7.7 45 1400
82 6.3×6.0 55 1380 10×12.5 19 2650
100 8×10.5 30 1800 10×10.5 24 2400
120 6.3×7.7 40 1500 10×12.5 18 2750
150 8×10.5 27 1900 10×10.5 23 2470
220 10×12.5 17 2830
270 8×10.5 26 2000 10×10.5 22 2530
330 10×12.5 16 2900
470 10×10.5 21 2600
560 10×12.5 15 3000
V
μF 63 80 100 125
6.8 6.3×6.0 150 960
10 6.3×7.7 100 1060 10×10.5 80 1450 10×10.5 90 1250
12 10×10.5 70 1600 10×10.5 80 1450
15 10×10.5 70 1600 10×12.5 60 1660
18 10×12.5 50 1830
22 8×10.5 40 1560
8×10.5 ★ 40 1560
33
10×10.5 30 2100
47 10×10.5 30 2100
56 10×12.5 22 2400
Please refer to page 17 for ripple current frequency coefficients. ESR(mΩ)max. at 100kHz, 20℃
★ S type
Case size:φDxL(mm) Rated ripple current
■ Part number 63 HV H 33 M +P 63 HV H 33 M S +P
Reel code Reel code
Series code
Type code
Type code
20 Rated voltage Rated voltage
Conductive Polymer
HVP
125℃ 2,000 to 3,000hours
●
Series
125℃
High Voltage
HVT
（P.22）
135℃
High Ripple
● Solvent proof (within 2 minutes) HVPZ HVP
● AEC-Q200 （P.25） High Cap.
HVPF
（P.27）
Reflow Soldering
Condition
Coefficient
Rated voltage (V) − 16 25 35 40 50 63 80 100 125
Surge voltage (V) Room temperature 20 32 44 50 63 79 100 125 157 HVA
Category temperature range (℃) − −55 to ＋125 HVBF
Capacitance tolerance (%) 120Hz/20℃ M : ±20 HVH

（max.）120Hz/20℃ 0.16 HVP
≤ 63V The greater value of either 0.01CV
Leakage current
（LC） μA/after 2minutes (max.) HVT
80V ≤ The greater value of either 0.05CV or 100
HVJ
16V φ6.3 : 2,000hours, D≥φ8 : 2,500hours
Test HVHZ
25V≤ φ6.3 : 2,000hours, D≥φ8 : 3,000hours
125℃
HVPZ
Endurance (With the rated HVHF
tanδ Less than 200% of the specified value
ripple current)
ESR Less than 200% of the specified value HVPF
LC Less than the specified value HVPX

HVTX
0.3max. W HVPY
Polarity
(Cathode)
D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
Lot No. 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2 HVTY
33 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2 HVPC
φD
(P)
H
Series Symbol
63 P
Rated Voltage
8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2 HEHZ
10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6 HEPZ
L
R (＋) 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEHF
(P)reference size HEPF
V
μF 16 25 35 40 50
6.3×6.0 ★ 120 690
10
6.3×7.7 80 840
15 6.3×7.7 80 840
18 6.3×6.0 110 720
27 6.3×6.0 100 760 6.3×7.7 70 870
33 8×10.5 35 1170
47 6.3×6.0 60 890 6.3×7.7 60 910
56 8×10.5 32 1220 10×10.5 25 1390
68 6.3×7.7 45 980
82 6.3×6.0 55 970 10×12.5 19 1590
100 8×10.5 30 1260 10×10.5 24 1440
120 6.3×7.7 40 1160 10×12.5 18 1650
150 8×10.5 27 1330 10×10.5 23 1480
220 10×12.5 17 1700
270 8×10.5 26 1540 10×10.5 22 1520
330 10×12.5 16 1740
470 10×10.5 21 2010
560 10×12.5 15 2320
V
μF 63 80 100 125
6.8 6.3×6.0 150 670
10 6.3×7.7 100 740 10×10.5 80 870 10×10.5 90 750
12 10×10.5 70 900 10×10.5 80 870
15 10×10.5 70 900 10×12.5 60 1000
18 10×12.5 50 1100
22 8×10.5 40 1090
8×10.5★ 40 1090
33
10×10.5 30 1260
47 10×10.5 30 1260
56 10×12.5 22 1440
★ S type
■ Part number 63 HV P 33 M +P 63 HV P 33 M S +P
Reel code Reel code
Rated capacitance
Series code
Series code
Type code Type code
Rated voltage Rated voltage
21
Conductive Polymer
HVT
135℃ 1,000 to 2,000hours
●
Series
135℃
Long Life
HVJ（P.23）
150℃
● Solvent proof (within 2 minutes) HVT
● AEC-Q200 135℃
HVP
（P.21）
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
Rated voltage (V) − 25 35 40 50 63
HVA
Surge voltage (V) Room temperature 32 44 50 63 79
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.16
HVT
Leakage current
（LC） μA/after 2minutes (max.) The greater value of either 0.01CV
HVJ
HVHZ
HVPF
HVPX
HVTX ■ Marking, Dimensions (Unit : mm)

HVPY Polarity 0.3max. W
(Cathode) D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
Lot No.
HVTY 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
HVPC 33 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
φD
Series Symbol
(P)
H
63 T 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6

HEHZ Rated Voltage
HEPZ
10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
L
R (＋)
HEHF
HEPF (P)reference size

V
μF 25 35 40 50
15 6.3×7.7 80 670
27 6.3×7.7 70 700
33 8×10.5 35 940
47 6.3×7.7 60 730
56 8×10.5 32 980 10×10.5 25 1110
68 6.3×7.7 45 780
82 10×12.5 19 1270
100 8×10.5 30 1010 10×10.5 24 1150
120 10×12.5 18 1320
150 8×10.5 27 1060 10×10.5 23 1180
220 10×12.5 17 1360
270 10×10.5 22 1220
330 10×12.5 16 1390
V
μF 63 Case size:φDxL(mm) ESR(mΩ)max. at 100kHz, 20℃
10 6.3×7.7 100 590 Rated ripple current
22 8×10.5 40 870 mArms(100kHz, 135℃)
8×10.5 ★ 40 870
33
10×10.5 30 1010
47 10×10.5 30 1010
56 10×12.5 22 1150
★ S type
■ Part number 63 HV T 33 M +P 63 HV T 33 M S +P
Reel code Reel code
Type code
Rated voltage
Rated voltage
22
Conductive Polymer
HVJ
150℃ 1,000hours
●
Series
150℃
Long Life

● HVJ
● AEC-Q200 150℃
HVT
（P.22）
Reflow Soldering
Condition
Coefficient
Rated voltage (V) − 25 35 50 63
HVA
Surge voltage (V) Room temperature 32 44 63 79
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.16
HVT
Leakage current
（LC） μA/after 2minutes (max.) 0.05CV
HVJ
△C/C Within ±30% of the initial value
150℃, 1,000hours HVHZ
rated voltage applied tanδ Less than 200% of the specified value
Endurance HVPZ
(With the rated ESR Less than 200% of the specified value
ripple current) HVHF
HVPF
HVPX
■ Marking, Dimensions HVTX

Polarity 0.3max. W (Unit : mm) HVPY
(Cathode)
Lot No. D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P HVTY
9D Rated Capacitance 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
100 HVPC
φD
(P)
Series Symbol
8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
H
35 J
Rated Voltage HEHZ
10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
L HEPZ
R (＋) 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEHF
(P)reference size HEPF

V
μF 25 35 50 63
15 6.3×7.7 100 380
22 6.3×7.7 80 410
33 8×10.5 40 610
47 6.3×7.7 60 510
56 8×10.5 35 660 10×10.5 30 710
68 6.3×7.7 45 540 10×12.5 22 810
100 8×10.5 30 710 10×10.5 28 780
120 10×12.5 19 890
150 8×10.5 27 740 10×10.5 23 830
220 10×12.5 17 950
270 10×10.5 22 850
330 10×12.5 16 970

■ Part number 35 HV J 100 M +P

Reel code
Rated capacitance
Series code
Type code
Rated voltage
23
Conductive Polymer
HVHZ
105℃ 2,000 to 5,000hours
●
Series
105℃
High Ripple Current
HVPZ
125℃
（P.25）
High Ripple
● Solvent proof (within 2 minutes) HVHZ HVH
● AEC-Q200 （P.20）
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.16
HVT
Leakage current
HVJ
HVHZ
HVPF
HVPX
HVTX
HVPY
HVTY
(Cathode)
Lot No. 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
HVPC
HEHZ 120
φD
Series Symbol
8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
(P)
H
C HZ
HEPZ Rated Voltage
16V:C, 25V:E
10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEHF 35V:V, 40V:G L 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
R (＋)
HEPF
(P)reference size

V
μF 16 25 35 40
18 6.3×6.0 55 1510
27 6.3×6.0 50 1530 6.3×7.7 48 1770
47 6.3×6.0 40 1800 6.3×7.7 45 1840
56 8×10.5 30 2450
68 6.3×7.7 35 1980
82 6.3×6.0 38 1890
100 8×10.5 28 2550 10×10.5 21 3380
120 6.3×7.7 32 2070 10×12.5 16 3870
150 8×10.5 25 2690 10×10.5 20 3490
220 10×12.5 15 4000
270 8×10.5 23 2820 10×10.5 19 3580
330 10×12.5 14 4140
470 10×10.5 18 3750
560 10×12.5 14 4340
■ Part number
16 HV HZ 120 M +P
Reel code
Rated capacitance
Series code
Type code
Rated voltage
24
Conductive Polymer
HVPZ
125℃ 2,000 to 3,000hours
●
Series
125℃
High Ripple Current
High Ripple
● HVPZ HVP
● AEC-Q200 125℃ （P.21）
HVHZ
（P.24）
Reflow Soldering
Condition
Coefficient
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.16
HVT
Leakage current
HVJ
16V φ6.3 : 2,000hours, D≥φ8 : 2,500hours
Test HVHZ
25V≤ φ6.3 : 2,000hours, D≥φ8 : 3,000hours
125℃ HVPZ
Endurance HVHF
(With the rated tanδ Less than 200% of the specified value
ripple current) HVPF
ESR Less than 200% of the specified value
HVPX
HVTX
HVPY
■ Marking, Dimensions (Unit : mm) HVTY
0.3max. W
Polarity
(Cathode)
D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P HVPC
Lot No. 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
9D HEHZ
Rated Capacitance
120 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
(P)
HEPZ
H
Series Symbol
C PZ
Rated Voltage
8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
HEHF
16V:C, 25V:E 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
35V:V, 40V:G L
R (＋) 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6 HEPF

(P)reference size

V
μF 16 25 35 40
18 6.3×6.0 55 1050
27 6.3×6.0 50 1070 6.3×7.7 48 1230
47 6.3×6.0 40 1260 6.3×7.7 45 1280
56 8×10.5 30 1710
68 6.3×7.7 35 1380
82 6.3×6.0 38 1320
100 8×10.5 28 1780 10×10.5 21 2360
120 6.3×7.7 32 1440 10×12.5 16 2700
150 8×10.5 25 1880 10×10.5 20 2440
220 10×12.5 15 2800
270 8×10.5 23 1970 10×10.5 19 2500
330 10×12.5 14 2890
470 10×10.5 18 2620
560 10×12.5 14 3030
■ Part number
16 HV PZ 120 M +P
Reel code
Rated capacitance
Series code
Type code
Rated voltage
25
Conductive Polymer
HVHF
105℃ 5,000 to 10,000hours
●
Series
105℃ Long Life
High Capacitance
HVPF（P.27）
125℃
High Cap.
● Solvent proof (within 2 minutes) HVHF HVH
● AEC-Q200 （P.20）
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
Rated voltage (V) − 25 35 50 63 80 100
HVA
Surge voltage (V) Room temperature 32 44 63 79 100 125
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.14 0.12 0.10 0.08 0.08 0.08
HVT
Leakage current
HVJ
Test 10,000hours(φ6.3×6.0 5,000hours)
HVHZ
HVPF
HVPX
HVTX
HVPY
HVTY Polarity 0.3max. W
(Cathode) D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
HVPC Lot No.
6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
HEHZ 68 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
Series Symbol
(P)
H
63 H 3.2
HEPZ Rated Voltage 8 10.5 8.3 8.3 9.0 0.7 to 1.0
HEHF 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
L
R (＋) 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEPF
(P)reference size

V
μF 25 35 50 63 80 100
10 6.3×6.0 120 1000 8×10.5 60 1400
6.3×6.0 ★ 120 1000 10×10.5 45 1500
15
6.3×7.7 80 1500
18 10×12.5 40 1580
22 6.3×6.0 80 1100 6.3×7.7 80 1500 8×10.5 45 1550
27 8×10.5 45 1550
33 6.3×7.7 40 1600 8×10.5 40 1700 10×10.5 36 1700
39 10×12.5 32 1800
47 6.3×6.0 60 1300 8×10.5 40 1700 10×10.5 36 1700
56 6.3×6.0 50 1300 10×10.5 30 1800 10×12.5 32 1800
68 6.3×7.7 35 2000 8×10.5 30 1800 10×12.5 22 2100
82 10×10.5 30 1800
100 6.3×7.7 30 2000 10×12.5 22 2100
120 10×10.5 28 2000
150 8×10.5 27 2300 10×12.5 19 2300
220 8×10.5 27 2300
270 10×10.5 20 2500
330 10×10.5 20 2500 10×12.5 17 2800
470 10×12.5 16 2800
ESR(mΩ)max. at 100kHz, 20℃ Rated ripple current
★ S type
Case size:φDxL(mm) mArms(100kHz, 105℃)
■ Part number 63 HV HF 68 M +P 63 HV HF 15 M S +P
Reel code Reel code
Rated voltage Type code
Rated voltage
26
Conductive Polymer
HVPF
125℃ 4,000hours
●
Series
125℃ Long Life
High Capacitance
High Ripple High Cap.

● HVPX HVPF HVP
● AEC-Q200 （P.28） High Ripple （P.21）
High Cap.
■ Specifications （P.30）
HVPC
Soldering Condition
Reflow Soldering
Condition
Coefficient
Rated voltage (V) − 25 35 50 63 80 100
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.14 0.12 0.10 0.08 0.08 0.08
HVT
Leakage current
HVJ
Endurance HVPZ
HVPF
HVPX
HVTX

HVPY
Polarity 0.3max. W HVTY

(Cathode) D ±0.5
L ±0.3
W ±0.2
H ±0.2
C±0.2
R P
Lot No. HVPC
6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
68 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2 HEHZ
φD
Series Symbol
(P)
H
63 P
Rated Voltage 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2 HEPZ
10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6 HEHF

L
R (＋) 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6 HEPF
(P)reference size

μF
V
25 35 50 63 80 100
10 6.3×6.0 120 700 8×10.5 60 900
6.3×6.0 ★ 120 700 10×10.5 45 1120
15
6.3×7.7 80 900
18 10×12.5 40 1220
22 6.3×6.0 80 750 6.3×7.7 80 8×10.5
900 45 1030
27 8×10.5 45 1030
33 6.3×7.7 40 1100 8×10.5 40 1100 10×10.5 36 1270
39 10×12.5 32 1360
47 6.3×6.0 60 900 8×10.5 40 1100 10×10.5 36 1270
56 6.3×6.0 50 900 10×10.5 30 1400 10×12.5 32 1360
68 6.3×7.7 35 1400 8×10.5 30 1250 10×12.5 22 1650
82 10×10.5 30 1400
100 6.3×7.7 30 1400 10×12.5 22 1650
120 10×10.5 28 1600
150 8×10.5 27 1600 10×12.5 19 1820
220 8×10.5 27 1600
270 10×10.5 20 2000
330 10×10.5 20 2000 10×12.5 17 2260
470 10×12.5 16 2260
ESR(mΩ)max. at 100kHz, 20℃ Rated ripple current
★ S type
63 HV PF 68 M +P 63 HV PF 15 M S +P
Reel code Reel code
Rated voltage Type code
Rated voltage
27
Conductive Polymer
HVPX
125℃ 4,000hours
●
Series
125℃ Long Life
High Ripple Current
135℃
HVTX（P.29）
φ6.3×6.0
● Solvent proof (within 2 minutes) HVPY HVPX HVPF φ6.3×7.7
● AEC-Q200 （P.30） High Ripple High Ripple（P.27）
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
Rated voltage (V) − 25 35 50 63 80
HVA
Surge voltage (V) Room temperature 32 44 63 79 100
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.14 0.12 0.10 0.08 0.08
HVT
Leakage current
HVJ
HVHZ 125℃, 4,000hours
HVPZ Endurance
HVHF ripple current)
HVPF
HVPX
HVTX
HVPY
■ Marking, Dimensions
HVTY 0.3max.
Polarity W (Unit : mm)
(Cathode)
HVPC Lot No. D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
HEHZ 9D Rated Capacitance 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
470
φD
(P)
Series Symbol
6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
H
HEPZ E PX
Rated Voltage
HEHF 25V:E, 35V:V, 50V:H 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
63V:J, 80V:K L
R (＋) 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEPF
A pressure relief vent is provided for φD=8 or bigger 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
(P)reference size

μF
V
25 35 50 63 80
22 8×10.5 45 2000
33 10×10.5 36 2550
39 10×12.5 32 3000
47 6.3×6.0 60 1400 8×10.5 40 2100
56 6.3×6.0 50 1400
68 6.3×7.7 35 2100 8×10.5 30 2300
82 10×10.5 30 2600
100 6.3×7.7 30 2100 10×12.5 22 3400
120 10×10.5 28 2700
150 8×10.5 27 2900 10×12.5 19 3500
220 8×10.5 27 2900
270 10×10.5 20 3300
330 10×10.5 20 3300 10×12.5 17 3800
470 10×12.5 16 3800
■ Part number
35 HV PX 68 M +P
Reel code
Rated capacitance
Series code
Type code
Rated voltage
28
Conductive Polymer
HVTX
135℃ 2,000 to 4,000hours
●
Series
135℃ Long Life
High Ripple Current
φ6.3×6.0
● HVTX φ6.3×7.7
● AEC-Q200 135℃
HVPX
（P.28）
Reflow Soldering
Condition
Coefficient
Rated voltage (V) − 25 35
HVA
Surge voltage (V) Room temperature 32 44
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.14 0.12
HVT
Leakage current
HVJ
Test 4,000hours(φ6.3 × 6.0 2,000hours)
HVHZ
HVPF
HVPX
HVTX
■ Marking, Dimensions HVPY
0.3max. HVTY
Polarity W (Unit : mm)
(Cathode)
Lot No. D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P HVPC
9D Rated Capacitance 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2 HEHZ
470
φD
(P)
Series Symbol
6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
H
E TX HEPZ
Rated Voltage
(25V:E, 35V:V ) 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2 HEHF
L
R (＋) 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEPF
A pressure relief vent is provided for φD=8 or bigger 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
(P)reference size

μF
V
25 35
47 6.3×6.0 60 900
56 6.3×6.0 50 900
68 6.3×7.7 35 1400
100 6.3×7.7 30 1400
150 8×10.5 27 1600
220 8×10.5 27 1600
270 10×10.5 20 2000
330 10×10.5 20 2000 10×12.5 17 2260
470 10×12.5 16 2260
■ Part number
25 HV TX 470 M +P
Reel code
Rated capacitance
Series code
Type code
Rated voltage
29
Conductive Polymer
HVPY
125℃ 4,000hours
●
Series
125℃ Long Life
High Ripple Current
135℃
HVTY（P.31）
High Ripple
● Solvent proof (within 2 minutes) HVPY HVPX
（P.28）
● AEC-Q200
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.14 0.12
HVT
Leakage current
HVJ
HVPZ Endurance
HVPF
HVPX
HVTX
HVPY
HVTY ■ Marking, Dimensions

HVPC Polarity 0.3max. W (Unit : mm)
(Cathode)
HEHZ Lot No. D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
9D Rated Capacitance 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEPZ 330
φD
(P)
Series Symbol
10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
H
HEHF V PY
Rated Voltage
(25V:E, 35V:V)
HEPF L
R (＋)
pressure relief vent
(P)reference size

μF
V
25 35
270 10×10.5 18 4000
330 10×10.5 18 4000 10×12.5 14 4700
470 10×12.5 14 4700
■ Part number
35 HV PY 330 M +P
Reel code
Rated capacitance
Series code
Type code
Rated voltage
30
Conductive Polymer
HVTY
135℃ 4,000hours
●
Series
135℃ Long Life
High Ripple Current

● HVTY
● AEC-Q200 135℃
HVPY
（P.30）
Reflow Soldering
Condition
Coefficient
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.14 0.12
HVT
Leakage current
HVJ
Endurance HVPZ
HVPF
HVPX
HVTX
HVPY
■ Marking, Dimensions HVTY
Polarity 0.3max. W (Unit : mm) HVPC

(Cathode)
Lot No. D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P HEHZ
330 HEPZ
φD
(P)
Series Symbol
10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
H
V TY HEHF
Rated Voltage
(25V:E, 35V:V)
L HEPF
R (＋)
(P)reference size

μF
V
25 35
270 10×10.5 18 2500
330 10×10.5 18 2500 10×12.5 14 2750
470 10×12.5 14 2750
■ Part number
35 HV TY 330 M +P
Reel code
Rated capacitance
Series code
Type code
Rated voltage
31
Conductive Polymer
HVPC
125℃ 4,000hours
●
Series
125℃ Long Life
High Ripple Current
High Capacitance
High Ripple
High Cap.
● HVPC HVPF
● AEC-Q200 （P.27）
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.16 0.14
HVT
Leakage current
HVJ
HVPZ Endurance
HVPF
HVPX
HVTX
HVPY
HVTY ■ Marking, Dimensions

HVPC Polarity 0.3max. W (Unit : mm)
(Cathode)
HEHZ Lot No. D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
HEPZ 560
φD
(P)
Series Symbol
10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
H
HEHF E PC
Rated Voltage
(25V:E, 35V:V) 10 12.5 10.3 10.3 11.0 1.0 to 1.4 4.6
HEPF L
R (＋)
(P)reference size

μF
V
25 35
180 8×10.5 33 1950
270 8×10.5 33 1950
330 10×10.5 24 2800
390 10×12.5 20 3000
470 10×10.5 24 2800
560 10×12.5 20 3000
■ Part number
25 HV PC 560 M +P
Reel code
Rated capacitance
Series code
Type code
Rated voltage
32
Hybrid Conductive Polymer Type / Radial Lead Type RoHS compliance
Conductive Polymer
HEHZ
105℃ 2,000 to 5,000hours ● Laminated case
●
Series
105℃
High Ripple Current
125℃
HEPZ（P.34）
High Ripple
● Solvent proof (within 2 minutes) HEHZ HEH
（On the web）
● AEC-Q200

Reflow Soldering
Condition
Coefficient
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.16
HVT
Leakage current
HVJ
HVHZ
HVPF
HVPX
HVTX

HVPY
HVTY
F±0.5
Polarity
(Cathode) φD L F φd
Lot No.
φd±0.05 HVPC
6.3 7.2 2.5 0.45
9DT
φD±0.5
Rated Capacitance
8 9.5 3.5 0.6 HEHZ
270
Series Symbol
C HZ 10 9.5 5.0 0.7 HEPZ
Rated Voltage
16V:C, 25V:E 10 11.5 5.0 0.7 HEHF
35V:V, 40V:G 15min. 5min.
L＋1.5max. 20min. HEPF
pressure relief vent(φD=10)

V
μF 16 25 35 40
27 6.3×7.2 48 1770
47 6.3×7.2 45 1840
56 8×9.5 30 2450
68 6.3×7.2 35 1980
100 8×9.5 28 2550 10×9.5 21 3380
120 6.3×7.2 32 2070 10×11.5 16 3870
150 8×9.5 25 2690 10×9.5 20 3490
220 10×11.5 15 4000
270 8×9.5 23 2820 10×9.5 19 3580
330 10×11.5 14 4140
470 10×9.5 18 3750
560 10×11.5 14 4340
Case size:φDxL(mm)
■ Part number 16 HE HZ 270 M T

Sn plating terminal option
Rated capacitance
Series code
Type code
Rated voltage
33
Hybrid Conductive Polymer Type / Radial Lead Type RoHS compliance
Conductive Polymer
HEPZ
125℃ 2,000 to 3,000hours ● Laminated case
●
Series
125℃
High Ripple Current

● HEPZ
● AEC-Q200 125℃
HEHZ
（P.33）
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.16
HVT
Leakage current
HVJ
16V φ6.3 : 2,000hours, D≥φ8 : 2,500hours
HVHZ Test
25V≤ φ6.3 : 2,000hours, D≥φ8 : 3,000hours
HVPZ 125℃
HVHF Endurance
HVPF ripple current)
ESR Less than 200% of the specified value
HVPX
HVTX
HVPY
HVTY
F±0.5
Polarity
(Cathode) φD L F φd
HVPC Lot No. φd±0.05
6.3 7.2 2.5 0.45
9DT
φD±0.5
HEHZ Rated Capacitance

8 9.5 3.5 0.6
270
Series Symbol
HEPZ C PZ 10 9.5 5.0 0.7
Rated Voltage
HEHF 16V:C, 25V:E 10 11.5 5.0 0.7
35V:V, 40V:G 15min. 5min.
HEPF L＋1.5max. 20min.
pressure relief vent(φD=10)

V
μF 16 25 35 40
27 6.3×7.2 48 1230
47 6.3×7.2 45 1280
56 8×9.5 30 1710
68 6.3×7.2 35 1380
100 8×9.5 28 1780 10×9.5 21 2360
120 6.3×7.2 32 1440 10×11.5 16 2700
150 8×9.5 25 1880 10×9.5 20 2440
220 10×11.5 15 2800
270 8×9.5 23 1970 10×9.5 19 2500
330 10×11.5 14 2890
470 10×9.5 18 2620
560 10×11.5 14 3030
Case size:φDxL(mm)
■ Part number 16 HE PZ 270 M T
Rated capacitance
Series code
Type code
Rated voltage
34
Hybrid Conductive Polymer Type / Redial Lead Type RoHS compliance
Conductive Polymer
HEHF
105℃ 10,000hours ● Laminated case
●
Series
105℃ Long Life
High Capacitance
HEPF（P.36）
125℃
High Cap.
● Solvent proof (within 2 minutes) HEHF HEH
● AEC-Q200 （on the web）

Reflow Soldering
Condition
Coefficient
Rated voltage (V) − 25 35 50 63 80 100
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.14 0.12 0.10 0.08 0.08 0.08
HVT
Leakage current
HVJ
rated voltage applied tanδ Less than 200％ of the specified value
Endurance HVPZ
(With the rated ESR Less than 200％ of the specified value
HVPF
HVPX

HVTX
Polarity HVPY
φD L F φd
F±0.5
(Cathode)
Lot No. φd±0.05 HVTY
9DT 6.3 7.2 2.5 0.45
Rated Capacitance
φD±0.5
68 8 9.5 3.5 0.6 HVPC

Series Symbol
63 H
Rated Voltage 10 9.5 5.0 0.7 HEHZ
10 11.5 5.0 0.7 HEPZ

15min. 5min.
L＋1.5max. 20min. HEHF
pressure relief vent(φD＝10)
HEPF

V
μF 25 35 50 63 80 100
10 8×9.5 60 1400
15 6.3×7.2 80 1500 10×9.5 45 1500
18 10×11.5 40 1580
22 6.3×7.2 80 1500 8×9.5 45 1550
27 8×9.5 45 1550
33 6.3×7.2 40 1600 8×9.5 40 1700 10×9.5 36 1700
39 10×11.5 32 1800
47 8×9.5 40 1700 10×9.5 36 1700
56 10×9.5 30 1800 10×11.5 32 1800
68 6.3×7.2 35 2000 8×9.5 30 1800 10×11.5 22 2100
82 10×9.5 30 1800
100 6.3×7.2 30 2000 10×11.5 22 2100
120 10×9.5 28 2000
150 8×9.5 27 2300 10×11.5 19 2300
220 8×9.5 27 2300
270 10×9.5 20 2500
330 10×9.5 20 2500 10×11.5 17 2800
470 10×11.5 16 2800
Case size:φDxL(mm) ESR(mΩ)
max. at 100kHz, 20℃

■ Part number 63 HE HF 68 M T
Rated capacitance
Series code
Type code
Rated voltage
35
Hybrid Conductive Polymer Type / Redial Lead Type RoHS compliance
Conductive Polymer
HEPF
125℃ 4,000hours ● Laminated case
●
Series
125℃ Long Life
High Capacitance

● HEPF
● AEC-Q200 125℃
HEHF
（P.35）
Soldering Condition
Reflow Soldering
■ Specifications
Condition
Coefficient
Rated voltage (V) − 25 35 50 63 80 100
HVA
HVBF
HVH
HVP
（max.）120Hz/20℃ 0.14 0.12 0.10 0.08 0.08 0.08
HVT
Leakage current
HVJ
rated voltage applied tanδ Less than 200％ of the specified value
HVPZ Endurance
(With the rated ESR Less than 200％ of the specified value
HVPF
HVPX
HVTX
HVPY Polarity
φD L F φd
F±0.5
(Cathode)
HVTY Lot No. φd±0.05
9DT 6.3 7.2 2.5 0.45
Rated Capacitance
φD±0.5
HVPC 68 8 9.5 3.5 0.6

Series Symbol
63 P
HEHZ Rated Voltage 10 9.5 5.0 0.7
HEPZ 10 11.5 5.0 0.7
15min. 5min.
HEHF L＋1.5max. 20min.
pressure relief vent(φD＝10)
HEPF

V
μF 25 35 50 63 80 100
10 8×9.5 60 900
15 6.3×7.2 80 900 10×9.5 45 1120
18 10×11.5 40 1220
22 6.3×7.2 80 9008×9.5 45 1030
27 8×9.5 45 1030
33 6.3×7.2 40 1100 8×9.5 40 1100 10×9.5 36 1270
39 10×11.5 32 1360
47 8×9.5 40 1100 10×9.5 36 1270
56 10×9.5 30 1400 10×11.5 32 1360
68 6.3×7.2 35 1400 8×9.5 30 1250 10×11.5 22 1650
82 10×9.5 30 1400
100 6.3×7.2 30 1400 10×11.5 22 1650
120 10×9.5 28 1600
150 8×9.5 27 1600 10×11.5 19 1820
220 8×9.5 27 1600
270 10×9.5 20 2000
330 10×9.5 20 2000 10×11.5 17 2260
470 10×11.5 16 2260
Case size:φDxL(mm) ESR(mΩ)

■ Part number 63 HE PF 68 M T
Rated capacitance
Series code
Type code
Rated voltage
36
Aluminum Electrolytic Capacitors
Aluminum electrolytic capacitors are hard to be a short-circuit
since the self-healing mechanism of the dielectric (aluminum oxide layer).
Aluminum electrolytic capacitors carry high voltage and high capacitance
with reasonable prices.
CE-BE
CE-BD
CE-BS
CE-BSS
CE-FE
CE-LD
CE-FSS
CE-FS
Features CE-FS
（High Voltage）
CE-FH
● Wide voltage range 4V to 450V.
CE-AX
● Wide capacitance range 0.47μF to 15000μF. CE-KX
● Self-healing mechanism of the dielectric. CE-ZX
(aluminum oxide layer) CE-ZC
CE-LX
● Hard to be a short-circait.
The primary filure mode is wear-out. CE-GA
CE-LS
● The capacitance does not change by voltage. CE-LH
● Strong to a pulse current and a pulse voltage （High Voltage）

CE-LH
as compared with the other type of capacitors. CE-LL
CE-LF
Applications CE-PC
CE-PH
Automotive electronics, Network equipments, Industrial equipments,
CE-PS
Digital equipments, Consumer electronics, personal computers,
CE-PF
signal processing, back-up use, etc.
CE-TH
CE-JX
CE-NP
CE-FN
ME-SWB
ME-UZ･SZ
ME-UAX･SAX
ME-SWG
ME-HC
ME-LS
ME-CZ
ME-CA
ME-CX
ME-AX
ME-WX
ME-WA
ME-WL
ME-WG
ME-FX
ME-PX
ME-HPC･HPD
ME-FC･FD
ME-FH
ME-SWN
ME-HWN
37
Aluminum Electrolytic Type / Surface Mount Type RoHS compliance
CE-BE Series
Small, Low Profile
3.9mm Height
Mount Type
Surface
Capacitors
CE-BD
（P.39）
● Solvent proof (within 2 minutes) Low Profile
● AEC-Q200 CE-BE
■ Specifications
Items Condition Specifications
Rated voltage (V) − 4 6.3 10 16 25 35 50
CE-BE Surge voltage (V) Room temperature 5.0 8.0 13 20 32 44 63

CE-BD Category temperature range (℃) − −40 to ＋85
CE-BS Capacitance tolerance (%) 120Hz/20℃ M : ±20
CE-BSS
（max.）120Hz/20℃ 0.40 0.30 0.24 0.20 0.16 0.14 0.12
CE-FE
Leakage current
CE-LD
CE-FSS Impedance ratio at Based on the value at −25℃ Z/Z20℃ 7 4 3 2 2 2 2

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 15 10 8 6 4 4 4
CE-FS
CE-FS（High Voltage） 85℃, 1,000hours △C/C Within ±25% of the initial value
rated voltage applied
CE-FH Endurance tanδ Less than 200% of the specified value
(With the rated
CE-AX ripple current) LC Less than the specified value
CE-KX
CE-ZX
CE-ZC
CE-LX ■ Marking, Dimensions

CE-GA 0.3max. (Unit : mm)
Polarity W
D±0.5 L −0.2 W±0.2 H±0.2 C±0.2 R P
＋0.1
(Cathode)
CE-LS Lot No.
CE-LH 9D Rated Capacitance
5 3.9 5.3 5.3 6.0 0.5 to 0.8 1.4
22 6.3 3.9 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
(P)
CE-LH（High Voltage） Series Symbol

H
16 E
CE-LL
CE-LF L
R (＋)
CE-PC
(P)reference size
CE-PH
CE-PS
CE-PF ■ Size, Rated Ripple Current

CE-TH V
μF 4 6.3 10 16 25 35 50
CE-JX
1.0 5×3.9 8.4
CE-NP 2.2 5×3.9 14
CE-FN 3.3 5×3.9 17
4.7 5×3.9 18 5×3.9 18 5×3.9 21
10 5×3.9 25 5×3.9 30 5×3.9 29 6.3×3.9 33
5×3.9★ 37
22
5×3.9 33 5×3.9 35 6.3×3.9 45 6.3×3.9 50 6.3×3.9 49
5×3.9★ 43
33
5×3.9 33 5×3.9 40 6.3×3.9 50 6.3×3.9 50 6.3×3.9 60
5×3.9★ 48
47
5×3.9 40 6.3×3.9 60 6.3×3.9 55 6.3×3.9 60
5×3.9★ 48
68
6.3×3.9 60 6.3×3.9 70
5×3.9★ 58
100
6.3×3.9 70 6.3×3.9 75
180 6.3×3.9 85
★BES Case size:φDxL(mm) Rated ripple current
mArms(120Hz, 85℃)
■ Part number BE BES

16 CE 22 BE 16 CE 22 BES
Series code Series code
Rated capacitance Rated capacitance
Type code Type code
38
CE-BD Series
Small, Low Profile
4.5mm Height
Capacitors
Mount Type
Surface
CE-BS
（P.40）
● AEC-Q200 CE-BD
■ Specifications
Rated voltage (V) − 4 6.3 10 16 25 35 50
Surge voltage (V) Room temperature 5.0 8.0 13 20 32 44 63 CE-BE
Category temperature range (℃) − −40 to ＋85 CE-BD
Capacitance tolerance (%) 120Hz/20℃ M : ±20 CE-BS
CE-BSS
（max.）120Hz/20℃ 0.40 0.30 0.24 0.20 0.16 0.14 0.12
CE-FE
Leakage current
CE-LD
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 7 4 3 2 2 2 2
CE-FSS
CE-FS
85℃, 1,000hours △C/C Within ±25% of the initial value CE-FS
（High Voltage）
Endurance tanδ Less than 200% of the specified value CE-FH
(With the rated
ripple current) LC Less than the specified value CE-AX
CE-KX
CE-ZX
CE-ZC
■ Marking, Dimensions CE-LX

(Unit : mm) CE-GA
Polarity 0.3max. W
D±0.5 L −0.2 W±0.2 H±0.2 C±0.2 R P
＋0.1
(Cathode)
Lot No. CE-LS
4 4.5 4.3 4.3 5.0 0.5 to 0.8 1.0 CE-LH
22 5 4.5 5.3 5.3 6.0 0.5 to 0.8 1.4
φD
(P)
Series Symbol （High Voltage）

CE-LH
C
H
16 V
Rated Voltage(6.3V→6) 6.3 4.5 6.6 6.6 7.3 0.5 to 0.8 2.2 CE-LL
L CE-LF
R (＋)
CE-PC
(P)reference size
CE-PH
CE-PS
■ Size, Rated Ripple Current CE-PF
V CE-TH
μF 4 6.3 10 16 25 35 50
CE-JX
0.47 4×4.5 4.0
CE-NP
1.0 4×4.5 8.4
CE-FN
2.2 4×4.5 14
3.3 4×4.5 17
4.7 4×4.5 17 4×4.5 18 5×4.5 21
10 4×4.5 23 5×4.5 27 5×4.5 29 6.3×4.5 33
22 4×4.5 28 5×4.5 33 5×4.5 37 6.3×4.5 47 6.3×4.5 49
33 4×4.5 28 5×4.5 37 5×4.5 41 6.3×4.5 51 6.3×4.5 57
47 4×4.5 33 5×4.5 45 6.3×4.5 53 6.3×4.5 61
100 5×4.5 56 6.3×4.5 70 6.3×4.5 74
220 6.3×4.5 96
mArms(120Hz, 85℃)
■ Part number
16 CE 22 BD
Series code
Rated capacitance
Type code
Rated voltage
39
CE-BS Series
Standard
Mount Type
Surface
Capacitors
CE-FS
（P.46）
● Solvent proof (within 2 minutes) 105℃
● AEC-Q200 CE-BS
Small
CE-BSS
（P.42）
■ Specifications
Rated voltage (V) − 4 6.3 10 16 25 35 50 63 100
CE-BE Surge voltage (V) Room temperature 5.0 8.0 13 20 32 44 63 79 125

CE-BSS
φ4 to φ6.3 0.35 0.26 0.20 0.16 0.14 0.12 0.12 0.12 0.10
CE-FE tanδ
（max.）
Dissipation Factor（tan δ） φ8 to φ16 0.40 0.30 0.24 0.20 0.16 0.14 0.12 0.12 0.10
CE-LD 120Hz/20℃
Exceeding 1,000μF, ＋0.02 every 1,000μF
CE-FSS
Leakage current
CE-FS
CE-FS（High Voltage） Impedance ratio at Based on the value at −25℃ Z/Z20℃ 7 4 3 2 2 2 2 2 2
CE-FH
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 15 8 6 4 4 3 3 3 3
CE-AX 85℃, 2,000hours △C/C Within ±25% of the initial value
CE-KX rated voltage applied
(With the rated
CE-ZX
ripple current) LC Less than the specified value
CE-ZC
CE-LX
CE-GA
CE-LS
CE-LH
[ φD≤10 ] 0.3max. W
CE-LH（High Voltage）
D±0.5 L W±0.2 H±0.2 C±0.2 R P
Polarity ＋0.1
CE-LL (Cathode) 4 5.4−0.2 4.3 4.3 5.0 0.5 to 0.8 1.0
Lot No. ±0.3
CE-LF
4 6.0 4.3 4.3 5.0 0.5 to 0.8 1.0
9D
φD
Rated Capacitance
(P)
H
＋0.1
CE-PC
10
Series Symbol
5 5.4−0.2 5.3 5.3 6.0 0.5 to 0.8 1.4
16 V 6.3 ＋0.1
7.3 2.2
CE-PH Rated Voltage(6.3V→6) 5.4−0.2 6.6 6.6 0.5 to 0.8
L
±0.3
R (＋) 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-PS [ φD≥12.5 ]
±0.3
CE-PF Polarity
6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
A pressure relief vent is provided ±0.3
CE-TH
(Cathode) Lot No.
for φD=8 or bigger 8 10.2 8.3 8.3 9.0 0.7 to 1.0 3.2
Indicated Only φD=16 ±0.3
CE-JX 9DT (P)reference size 10 7.7 10.3 10.3 11.0 1.0 to 1.4 4.6
Rated Capacitance
4700 ±0.3
CE-NP Series Symbol 10 10.2 10.3 10.3 11.0 1.0 to 1.4 4.6
10 V ±0.5
CE-FN
Rated Voltage(6.3V→6) 12.5 13.5 12.8 12.8 13.5 1.0 to 1.4 4.6
±0.5
16 16.5 16.3 16.3 17.3 1.7 to 2.1 7.0
40
■ Size, Rated Ripple Current

V
4 6.3 10 16 25
Capacitors
Mount Type
Surface
μF
4.7 4×5.4 19
10 4×5.4 25 5×5.4 28
22 4×5.4 31 5×5.4 35 5×5.4 39 6.3×5.4 52
33 4×5.4 26 5×5.4 39 5×5.4 43 6.3×5.4 57 6.3×5.4 63
47 4×5.4 34 5×5.4 47 6.3×5.4 59 6.3×5.4 68 6.3×6.0 68
100 5×5.4 61 6.3×5.4 71 6.3×5.4 76 6.3×5.4 86 6.3×7.7 130
150 6.3×6.0 88 6.3×7.7 135 8×10.2 200
6.3×5.4 82 6.3×6.0 95 6.3×7.7 150 6.3×7.7 150 8×10.2 250
220
10×7.7 250 CE-BE
6.3×6.0 102 6.3×7.7 150 8×10.2 280 8×10.2 280 8×10.2 310 CE-BD
330
10×7.7 280 CE-BS
6.3×7.7 150 8×10.2 300 8×10.2 300 8×10.2 330 10×10.2 430 CE-BSS
470
10×7.7 300 CE-FE
8×10.2 300 10×10.2 450 CE-LD

680
10×7.7 300 CE-FSS
8×10.2 330 10×10.2 450 12.5×13.5 660 CE-FS

1000
10×7.7 330 CE-FS
（High Voltage）
1500 10×10.2 450 12.5×13.5 710 CE-FH
2200 12.5×13.5 730 16×16.5 1150 CE-AX
3300 12.5×13.5 750 16×16.5 1200 CE-KX
4700 16×16.5 1260 CE-ZX
6800 16×16.5 1330 CE-ZC
CE-LX
CE-GA
V
μF 35 50 63 100 CE-LS
0.47 4×5.4 5 4×5.4 5 CE-LH
1.0 4×5.4 10 4×5.4 10 4×6.0 10 （High Voltage）

CE-LH
2.2 4×5.4 15 4×5.4 15 6.3×6.0 20 CE-LL
3.3 4×5.4 18 5×5.4 20 6.3×6.0 28 CE-LF
4.7 4×5.4 20 5×5.4 23 5×5.4 23 6.3×6.0 35 CE-PC
10 5×5.4 30 6.3×5.4 34 6.3×5.4 34 6.3×7.7 50 CE-PH
22 6.3×5.4 54 6.3×6.0 60 6.3×7.7 70 8×10.2 120 CE-PS
33 6.3×6.0 60 6.3×7.7 85 8×10.2 160 10×10.2 190 CE-PF
47 6.3×6.0 70 6.3×7.7 90 8×10.2 170 12.5×13.5 330 CE-TH
68 8×10.2 180 12.5×13.5 350 CE-JX
82 10×7.7 200 CE-NP
100 6.3×7.7 120 8×10.2 200 10×10.2 280 16×16.5 550 CE-FN
8×10.2 220 16×16.5 560

150
10×7.7 220
220 8×10.2 270 10×10.2 320 12.5×13.5 410
330 10×10.2 340 12.5×13.5 520
390 12.5×13.5 550
470 12.5×13.5 590 16×16.5 700
680 12.5×13.5 610
1000 16×16.5 1000 16×16.5 940
1500 16×16.5 1060
10×7.7:CE-BSA mArms(120Hz, 85℃)
16×16.5:CE-BST
■ Part number BS BSA BST

16 CE 10 BS 10 CE 470 BSA 10 CE 4700 BS T
Series code Series code Series code
Rated capacitance Rated capacitance Rated capacitance
Type code Type code Type code
Rated voltage Rated voltage Rated voltage
41
CE-BSS Series
Small, High Capacitance
5.4mm Height
Mount Type
Surface
Capacitors
CE-BS
（P.40）
● Solvent proof (within 2 minutes) Small
● AEC-Q200 CE-BSS
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
CE-BE Surge voltage (V) Room temperature 8.0 13 20 32 44 63

CE-BSS
（max.）120Hz/20℃ 0.28 0.24 0.20 0.16 0.14 0.12
CE-FE
Leakage current
CE-LD
CE-FSS Impedance ratio at Based on the value at −25℃ Z/Z20℃ 4 3 2 2 2 2

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 10 8 6 4 4 4
CE-FS
CE-FH Endurance tanδ Less than 200% of the specified value
(With the rated
CE-KX
CE-ZX
CE-ZC

CE-GA (Unit : mm)
D±0.5 L −0.2 W±0.2 H±0.2 C±0.2 R P

＋0.1
CE-LS
Polarity 0.3max. W
(Cathode)
CE-LH
Lot No. 4 5.4 4.3 4.3 5.0 0.5 to 0.8 1.0
9D
CE-LH（High Voltage） 22
Rated Capacitance
5 5.4 5.3 5.3 6.0 0.5 to 0.8 1.4
φD
Series Symbol
(P)
6.3 5.4 6.6 6.6 7.3 0.5 to 0.8 2.2

H
CE-LL 16 S
CE-LF
L
CE-PC R (＋)
CE-PH (P)reference size
CE-PS

CE-TH V
μF 6.3 10 16 25 35 50
CE-JX
4.7 4×5.4 18
CE-NP
10 4×5.4 20 4×5.4 20 5×5.4 27
CE-FN
22 4×5.4 28 4×5.4 28 5×5.4 35 5×5.4 36 6.3×5.4 40
33 4×5.4 31 4×5.4 32 5×5.4 40 5×5.4 42 6.3×5.4 58
47 4×5.4 36 5×5.4 43 5×5.4 44 6.3×5.4 65 6.3×5.4 65
56 5×5.4 46 5×5.4 46 5×5.4 48 6.3×5.4 68
100 5×5.4 47 5×5.4 50
150 6.3×5.4 71 6.3×5.4 76
220 6.3×5.4 74
mArms(120Hz, 85℃)
■ Part number
16 CE 22 BSS
Series code
Rated capacitance
Type code
Rated voltage
42
CE-FE Series
Small, Low Profile
3.9mm Height
Capacitors
Mount Type
Surface
CE-FD
（On the web）
105℃ 1,000hours
●
Small
● Solvent proof (within 2 minutes) CE-FE
● AEC-Q200
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
Surge voltage (V) Room temperature 8.0 13 20 32 44 63 CE-BE
CE-BSS
（max.）120Hz/20℃ 0.38 0.32 0.20 0.16 0.14 0.14
CE-FE
Leakage current
CE-LD
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 4 3 2 2 2 2
CE-FSS
CE-FS
（High Voltage）
(With the rated
CE-KX
CE-ZX
CE-ZC

CE-LX
CE-GA
D L W H C R P
＋0.1
Polarity 0.3max. W
±0.5
−0.2
±0.2 ±0.2 ±0.2
(Cathode)
CE-LS
Lot No. 5 3.9 5.3 5.3 6.0 0.5 to 0.8 1.4
9D Rated Capacitance CE-LH
22 6.3 3.9 6.6 6.6 7.3 0.5 to 0.8 2.2
φD

CE-LH
(P)
16 F
H
CE-LL
L CE-LF
R (＋)
CE-PC
(P)reference size
CE-PH
CE-PS
V CE-TH
μF 6.3 10 16 25 35 50
CE-JX
1.0 5×3.9 6
CE-NP
2.2 5×3.9 10
CE-FN
3.3 5×3.9 12
4.7 5×3.9 13 5×3.9 13 5×3.9 16
10 5×3.9 18 5×3.9 21 5×3.9 22 6.3×3.9 23
5×3.9★ 26
22
5×3.9 23 5×3.9 25 6.3×3.9 31 6.3×3.9 35 6.3×3.9 34
5×3.9★ 30
33
5×3.9 28 6.3×3.9 35 6.3×3.9 35 6.3×3.9 42
5×3.9★ 34
47
6.3×3.9 42 6.3×3.9 38 6.3×3.9 42
68 6.3×3.9 49
100 6.3×3.9 52
★FES Case size:φDxL(mm) Rated ripple current
mArms(120Hz, 105℃)
■ Part number FE FES

16 CE 22 FE 16 CE 22 FES
Type code Type code
43
CE-LD Series
4.5mm Height
Long Life
Mount Type
Surface
Capacitors
105℃ 2,000 to 3,000hours

●

● CE-LD
● AEC-Q200 105℃
CE-BD
（P.39）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50

CE-BSS
（max.）120Hz/20℃ 0.35 0.30 0.20 0.16 0.14 0.12
CE-FE
Leakage current
CE-LD

CE-FS
CE-FS（High Voltage） Test φ4 to φ5 : 2,000hours, φ6.3 : 3,000hours

105℃
CE-FH rated voltage applied △C/C Within ±30% of the initial value
Endurance
CE-AX (With the rated tanδ Less than 300% of the specified value
ripple current)
CE-KX LC Less than the specified value
CE-ZX
CE-ZC
CE-LX
CE-GA
CE-LS Polarity 0.3max. W
D±0.5 L −0.2 W±0.2 H±0.2 C±0.2 R P
＋0.1
(Cathode)
CE-LH Lot No.
4 4.5 4.3 4.3 5.0 0.5 to 0.8 1.0
CE-LH（High Voltage） 9D Rated Capacitance
22 5 4.5 5.3 5.3 6.0 0.5 to 0.8 1.4
φD
Series Symbol
(P)
CE-LL
H
16 L
CE-LF
CE-PC L
R (＋)
CE-PH
(P)reference size
CE-PS
CE-PF
CE-TH
CE-JX
V
μF 6.3 10 16 25 35 50
CE-NP
0.47 4×4.5 2.8
CE-FN
1.0 4×4.5 5.9
2.2 4×4.5 10
3.3 4×4.5 12
4.7 4×4.5 12 4×4.5 13 5×4.5 15
10 4×4.5 17 5×4.5 19 5×4.5 24 6.3×4.5 24
22 4×4.5 20 5×4.5 24 5×4.5 26 6.3×4.5 33 6.3×4.5 35
33 5×4.5 26 5×4.5 29 6.3×4.5 36 6.3×4.5 40
47 5×4.5 32 6.3×4.5 38 6.3×4.5 43 6.3×4.5 44
100 6.3×4.5 49 6.3×4.5 52
mArms(120Hz, 105℃)
■ Part number
16 CE 22 LD
Series code
Rated capacitance
Type code
Rated voltage
44
CE-FSS Series
5.4mm Height
Capacitors
Mount Type
Surface
CE-FS
（P.46）
● Solvent proof (within 2 minutes) Small
● AEC-Q200 CE-FSS
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
CE-BSS
（max.）120Hz/20℃ 0.35 0.30 0.26 0.20 0.16 0.12
CE-FE
Leakage current
CE-LD
CE-FSS
CE-FS
105℃, 1,000hours △C/C Within ±25% of the initial value(6.3V:±30%) CE-FS
（High Voltage）
(With the rated
CE-KX
CE-ZX
CE-ZC

CE-LX
0.3max. CE-GA
D L W H C R P
＋0.1
Polarity W ±0.5
−0.2
±0.2 ±0.2 ±0.2
(Cathode)
CE-LS
Lot No. 4 5.4 4.3 4.3 5.0 0.5 to 0.8 1.0
9D Rated Capacitance CE-LH
47 5 5.4 5.3 5.3 6.0 0.5 to 0.8 1.4
φD

CE-LH
(P)
H
16 F
Rated Voltage
6.3 5.4 6.6 6.6 7.3 0.5 to 0.8 2.2
(6.3V→6) CE-LL
L CE-LF
R (＋)
CE-PC
(P)reference size
CE-PH
CE-PS
V CE-TH
μF 6.3 10 16 25 35 50
CE-JX
4.7 4×5.4 16
CE-NP
10 4×5.4 22 4×5.4 22 5×5.4 23
CE-FN
22 4×5.4 28 4×5.4 28 5×5.4 35 5×5.4 35 6.3×5.4 35
33 4×5.4 29 4×5.4 29 5×5.4 35 5×5.4 45 6.3×5.4 42
47 4×5.4 36 5×5.4 43 5×5.4 39 6.3×5.4 70
100 5×5.4 47 5×5.4 47
150 6.3×5.4 71 6.3×5.4 71
220 6.3×5.4 74
mArms(120Hz, 105℃)
■ Part number
16 CE 47 FSS
Series code
Rated capacitance
Type code
Rated voltage
45
CE-FS Series
105℃ Standard
Mount Type
Surface
Capacitors
CE-GA
（P.58）
105℃ 1,000 to 2,000hours
●
Low Impedance
Long Life
● Solvent proof (within 2 minutes) CE-FH CE-FS
● AEC-Q200 （P.49）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63 100
CE-BE Surge voltage (V) Room temperature 8.0 13 20 32 44 63 79 125

CE-BD Category temperature range (℃) − −55 to ＋105 −40 to +105
CE-BSS
φ4 to φ6.3 0.24 0.20 0.16 0.14 0.12 0.10 0.12 0.10
CE-FE
tanδ
（max.） φ8 to φ16 0.28 0.24 0.20 0.16 0.14 0.12 0.12 0.10
CE-LD Dissipation Factor（tan δ）
120Hz/20℃ φ18 0.34 0.30 0.26 0.22 0.18 0.16 0.14 0.10
CE-FSS
CE-FS
CE-FS（High Voltage） Leakage current

CE-FH Impedance ratio at Based on the value at −40℃ Z/Z20℃ 3 3 2 2 2 2 2 3

CE-AX Iow temperature 120Hz, ＋20℃ −55℃ Z/Z20℃ 8 5 4 3 3 3 3 −
CE-KX Test φ4 to φ6.3, φ10 × 7.7 : 1,000hours, φ8 to φ18 : 2,000hours
CE-ZX 105℃
CE-ZC Endurance
CE-LX ripple current)
CE-GA
CE-LS
CE-LH
[ φD≤10 ]
CE-LL D±0.5 L W±0.2 H±0.2 C±0.2 R P
Polarity 0.3max. W
CE-LF
(Cathode) 4 5.4＋0.1
−0.2 4.3 4.3 5.0 0.5 to 0.8 1.0
Lot No.
CE-PC 9D Rated Capacitance
4 6.0±0.3 4.3 4.3 5.0 0.5 to 0.8 1.0
470 5 5.4＋0.1 5.3 5.3 6.0 0.5 to 0.8 1.4
φD
CE-PH Series Symbol −0.2

(P)
16 F
H
CE-PS
Rated Voltage(6.3V→6) 6.3 5.4＋0.1
−0.2 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-PF [ φD≥12.5 ] 6.3 6.0±0.3 6.6 6.6 7.3 0.5 to 0.8 2.2
L
Polarity R (＋) 6.3 7.7±0.3 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-TH (Cathode)
Lot No.
CE-JX Indicated φD=16, 18 8 10.2±0.3 8.3 8.3 9.0 0.7 to 1.0 3.2
9DT A pressure relief vent is provided
CE-NP 4700 Rated Capacitance for φD=8 or bigger 10 7.7±0.3 10.3 10.3 11.0 1.0 to 1.4 4.6
Series Symbol
10 F (P)reference size 10 10.2±0.3 10.3 10.3 11.0 1.0 to 1.4 4.6
CE-FN Rated Voltage(6.3V→6)
12.5 13.5±0.5 12.8 12.8 13.5 1.0 to 1.4 4.6
16 16.5±0.5 16.3 16.3 17.3 1.7 to 2.1 7.0
18 16.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0
18 21.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0
46

V
6.3 10 16 25 35
Capacitors
Mount Type
Surface
μF
4.7 4×5.4 13 4×5.4 14

10 4×5.4 18 5×5.4 20 5×5.4 21
22 4×5.4 22 5×5.4 25 5×5.4 27 6.3×5.4 36 6.3×5.4 38
33 5×5.4 27 5×5.4 30 6.3×5.4 40 6.3×5.4 44 6.3×6.0 42
47 5×5.4 33 6.3×5.4 41 6.3×5.4 48 6.3×6.0 48 6.3×6.0 49
100 6.3×5.4 50 6.3×5.4 53 6.3×5.4 60 6.3×7.7 91 6.3×7.7 84
6.3×6.0 62 6.3×7.7 95 8×10.2 140 8×10.2 155
150
10×7.7 155
6.3×6.0 67 6.3×7.7 105 6.3×7.7 105 8×10.2 175 8×10.2 190 CE-BE
220
10×7.7 175 CE-BD
6.3×7.7 105 8×10.2 195 8×10.2 195 8×10.2 220 10×10.2 300 CE-BS
330
10×7.7 195 CE-BSS
8×10.2 210 8×10.2 210 8×10.2 230 10×10.2 300 12.5×13.5 410 CE-FE
470
10×7.7 210 CE-LD
8×10.2 210 10×10.2 310 12.5×13.5 430 CE-FSS

680
10×7.7 210 CE-FS
1000 8×10.2 230 10×10.2 310 12.5×13.5 460 16×16.5 700 CE-FS
（High Voltage）
1500 10×10.2 310 12.5×13.5 500 16×16.5 740 CE-FH
2200 12.5×13.5 510 16×16.5 805 18×16.5 950 CE-AX
2700 18×21.5 1200 CE-KX
3300 12.5×13.5 520 16×16.5 840 18×16.5 1040 CE-ZX
3900 18×21.5 1280 CE-ZC
4700 16×16.5 880 18×16.5 1090 CE-LX
5600 18×21.5 1300 CE-GA
6800 16×16.5 930 18×16.5 1150 CE-LS
8200 18×21.5 1350 CE-LH
10000 18×16.5 1200 （High Voltage）

CE-LH
12000 18×21.5 1350 CE-LL
CE-LF
V
μF 50 63 100 CE-PC
0.47 4×5.4 3.5 4×5.4 3.5 CE-PH
1.0 4×5.4 7.0 4×5.4 7.0 4×6.0 7.0 CE-PS
2.2 4×5.4 11 4×5.4 11 6.3×6.0 14 CE-PF
3.3 4×5.4 13 5×5.4 14 6.3×6.0 20 CE-TH
4.7 5×5.4 16 5×5.4 16 6.3×6.0 25 CE-JX
10 6.3×5.4 24 6.3×5.4 24 6.3×7.7 35 CE-NP
22 6.3×6.0 42 6.3×7.7 49 8×10.2 84 CE-FN
33 6.3×7.7 60 8×10.2 112 10×10.2 133

47 6.3×7.7 63 8×10.2 119 12.5×13.5 240
68 8×10.2 126 12.5×13.5 245
82 10×7.7 140
100 8×10.2 140 10×10.2 196 16×16.5 490
150 16×16.5 500
220 10×10.2 220 12.5×13.5 287 18×16.5 650
330 12.5×13.5 365 18×21.5 700
390 12.5×13.5 380
470 16×16.5 630
680 18×16.5 750
1000 16×16.5 655 18×21.5 900
1500 18×21.5 1100
Please refer to page 14 for
ripple current frequency coefficients. Case size:φDxL(mm) mArms(120Hz, 105℃)
10×7.7:CE-FSA
φ16, φ18:CE-FST
■ Part number FS FSA FST

16 CE 470 FS 10 CE 470 FSA 10 CE 4700 FS T
47
CE-FS Series
105℃ Standard
High Voltage
Mount Type
Surface
Capacitors
160 to 400V, 105℃ 1,000 to 2,000hours

●
Non solvent proof

●
● AEC-Q200
■ Specifications
Rated voltage (V) − 160 200 250 400
CE-BE Surge voltage (V) Room temperature 200 250 300 450
CE-BSS Dissipation Factor（tan δ） tanδ

（max.）120Hz/20℃ 0.20 0.25
CE-FE μA/after CV ≤ 1000 0.03CV ＋15

Leakage current
（LC）
2minutes (max.) CV > 1000 0.02CV ＋25
CE-LD
CE-FSS Impedance ratio at Based on the value at −25℃ Z/Z20℃ 3 3 3 6

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 6 6 6 10
CE-FS
CE-FS（High Voltage） Test φ8 : 1,000hours, φ10 to φ16 : 2,000hours

105℃
Endurance
CE-AX
ripple current)
CE-ZX
CE-ZC ■ Marking, Dimensions (Unit : mm)

CE-LX [ φD≤10 ]
D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
CE-GA Polarity 0.3max. W
(Cathode) 8 10.5 8.3 8.3 9.0 0.7∼1.0 3.2
Lot No.
CE-LS
10 10.5 10.3 10.3 11.0 1.0∼1.4 4.6
CE-LH 10 12.5 13.5±0.5 12.8 12.8 13.5 1.0∼1.4 4.6
φD
Series Symbol
(P)
H
CE-LH（High Voltage） 200 F

Rated Voltage 16 16.5±0.5 16.3 16.3 17.3 1.7∼2.1 7.0
CE-LL
[ φD≥12.5 ] L
CE-LF Polarity R (＋)
(Cathode) pressure relief vent
CE-PC Lot No.
Indicated Only φD=16 (P)reference size
CE-PH 9DT
Rated Capacitance
47
CE-PS Series Symbol
200 F
Rated Voltage
CE-PF
CE-TH
CE-JX ■ Size, Rated Ripple Current

V
CE-NP
μF 160 200 250 400
CE-FN 2.2 8×10.5 25
3.3 8×10.5 31 10×10.5 36
4.7 8×10.5 37 10×10.5 38
6.8 8×10.5 44 12.5×13.5 47
10 8×10.5 57 10×10.5 64 10×10.5 64 12.5×13.5 57
22 12.5×13.5 112 12.5×13.5 112 12.5×13.5 112 16×16.5 115
33 12.5×13.5 137 12.5×13.5 137 16×16.5 150
47 16×16.5 180 16×16.5 180 16×16.5 180
68 16×16.5 215 16×16.5 215
82 16×16.5 235
Please refer to page 14 for Case size:φDxL(mm) Rated ripple current
ripple current frequency coefficients. 16×16.5:CE-FST mArms(120Hz, 105℃)
■ Part number FS FST

200 CE 10 FS 200 CE 47 FS T
Type code Type code
Rated voltage
Rated voltage
48
CE-FH Series
Long Life
Capacitors
Mount Type
Surface
105℃ 2,000 to 5,000hours
●
Long Life
● CE-FH CE-FS
（P.46）
● AEC-Q200
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
0.30 0.24 0.20 0.16 0.14 0.14 CE-BSS
（max.）120Hz/20℃
Exceeding 1,000μF, ＋0,02 every 1,000μF CE-FE
Leakage current
（LC） μA/after 2minutes (max.) The greater value of either 0.01CV or 3 CE-LD
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 4 3 2 2 2 2 CE-FSS
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 8 6 4 4 3 3 CE-FS
Test φ4 to φ6.3 : 2,000hours, φ8 to φ10 : 3,000hours, , φ12.5 to φ16 : 5,000hours CE-FS
（High Voltage）
105℃
rated voltage applied △C/C Within ±25% of the initial value CE-FH
Endurance
(With the rated tanδ Less than 250% of the specified value CE-AX
ripple current)
LC Less than the specified value CE-KX
CE-ZX

CE-ZC
[ φD≤10 ] CE-LX
D±0.5
L ±0.3
W ±0.2
H ±0.2
C±0.2
R P
Polarity 0.3max. W CE-GA
(Cathode) 4 6.0 4.3 4.3 5.0 0.5 to 0.8 1.0
Lot No.
CE-LS
5 6.0 5.3 5.3 6.0 0.5 to 0.8 1.4
470 CE-LH
6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
Series Symbol
(P)
H
16 H （High Voltage）
CE-LH
CE-LL
[ φD≥12.5 ] L 8 10.2 8.3 8.3 9.0 0.7 to 1.0 3.2
Polarity R (＋) CE-LF
(Cathode) 10 10.2 10.3 10.3 11.0 1.0 to 1.4 4.6
Lot No.
A pressure relief vent is provided ±0.5 CE-PC
Indicated Only φD=16 12.5 13.5 12.8 12.8 13.5 1.0 to 1.4 4.6
9DT for φD=8 or bigger
CE-PH
2200 Rated Capacitance
(P)reference size 16 16.5±0.5 16.3 16.3 17.3 1.7 to 2.1 7.0
Series Symbol CE-PS
16 H
CE-PF
CE-TH
■ Size, Rated Ripple Current CE-JX
V
μF 6.3 10 16 25 35 50 CE-NP
1.0 4×6.0 7 CE-FN

2.2 4×6.0 11
3.3 4×6.0 13
4.7 4×6.0 13 4×6.0 15 5×6.0 19
10 4×6.0 18 5×6.0 23 5×6.0 25 6.3×6.0 32
22 4×6.0 22 5×6.0 27 5×6.0 30 6.3×6.0 42 6.3×6.0 44 6.3×7.7 60
33 5×6.0 30 5×6.0 35 6.3×6.0 44 6.3×6.0 58 6.3×7.7 77 8×10.2 140
47 5×6.0 36 6.3×6.0 46 6.3×6.0 60 6.3×7.7 91 8×10.2 150 8×10.2 150
100 6.3×6.0 67 6.3×6.0 62 6.3×7.7 95 8×10.2 150 8×10.2 160 10×10.2 220
220 6.3×7.7 105 8×10.2 175 8×10.2 175 8×10.2 195 10×10.2 290 12.5×13.5 340
330 8×10.2 195 8×10.2 195 8×10.2 210 10×10.2 290 12.5×13.5 380
470 8×10.2 210 8×10.2 210 10×10.2 290 12.5×13.5 400 16×16.5 610
680 10×10.2 300 12.5×13.5 415
1000 10×10.2 300 12.5×13.5 440 16×16.5 620
1500 12.5×13.5 480 16×16.5 720
2200 12.5×13.5 490 16×16.5 785
3300 16×16.5 820
4700 16×16.5 860
Please refer to page 14 for ripple current frequency coefficients. Case size:φDxL(mm) Rated ripple current
16×16.5:CE-FHT mArms(120Hz, 105℃)
■ Part number FH FHT

16 CE 470 FH 16 CE 2200 FH T
Type code Type code
Rated voltage
Rated voltage
49
CE-AX Series
Low Impedance
Mount Type
Surface
Capacitors
CE-KX
（P.52）
105℃ 1,000 to 2,000hours
●
Low Impedance
Long Life
● Solvent proof (within 2 minutes) CE-LS CE-AX
● AEC-Q200 （P.59）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50

CE-BSS
φ4 to φ6.3 0.24 0.20 0.16 0.14 0.12 0.12
CE-FE tanδ
（max.）
Dissipation Factor（tan δ） φ8 to φ16 0.28 0.24 0.20 0.16 0.14 0.14
CE-LD 120Hz/20℃
CE-FSS
Leakage current
CE-FS
CE-FS（High Voltage） Impedance ratio at Based on the value at −40℃ Z/Z20℃ 3 2 2 2 2 2
CE-FH
CE-AX Test φ4 to φ6.3, φ10 × 7.7 : 1,000hours, φ8 to φ16 : 2,000hours
CE-KX
105℃
CE-ZX Endurance
CE-ZC ripple current)
CE-LX
CE-GA
CE-LS
CE-LH
[ φD≤10 ]
D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
Polarity
CE-LL
(Cathode) 4 6.0 4.3 4.3 5.0 0.5 to 0.8 1.0
Lot No. 0.3max. W
CE-LF 9D Rated Capacitance
5 6.0 5.3 5.3 6.0 0.5 to 0.8 1.4
470 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-PC Series Symbol
16 A
6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
(P)
CE-PH
C
H
CE-PS
[ φD≥12.5 ] 8 10.2 8.3 8.3 9.0 0.7 to 1.0 3.2
Polarity
CE-PF (Cathode) L 10 7.7 10.3 10.3 11.0 1.0 to 1.4 4.6
Lot No. R (＋)
CE-TH Indicated Only φD=16 10 10.2 10.3 10.3 11.0 1.0 to 1.4 4.6
9DT A pressure relief vent is provided
CE-JX 4700 Rated Capacitance
for φD=8 or bigger 12.5 13.5±0.5 12.8 12.8 13.5 1.0 to 1.4 4.6
Series Symbol
10 A (P)reference size 16 16.5±0.5 16.3 16.3 17.3 1.7 to 2.1 7.0
CE-NP Rated Voltage(6.3V→6)
CE-FN
50
■ Size, Impedance, Rated Ripple Current

V
6.3 10 16 25 35 50
Capacitors
Mount Type
Surface
μF
4.7 4×6.0 1.80 80 4×6.0 2.90 60
10 4×6.0 1.80 80 5×6.0 0.76 150 6.3×6.0 0.88 165
15 4×6.0 1.80 80 5×6.0 0.76 150 5×6.0 0.76 150
22 4×6.0 1.80 80 5×6.0 0.76 150 5×6.0 0.76 150 5×6.0 0.76 150 6.3×6.0 0.88 165
27 4×6.0 1.80 80
33 → 5×6.0 0.76 150 → 6.3×6.0 0.44 230 6.3×6.0 0.44 230 6.3×7.7 0.68 195
47 5×6.0 0.76 150 → 6.3×6.0 0.44 230 6.3×6.0 0.44 230 6.3×6.0 0.44 230 6.3×7.7 0.68 195
CE-BE
56 5×6.0 0.76 150 6.3×6.0 0.44 230 CE-BD
68 → 6.3×6.0 0.44 230 6.3×6.0 0.44 230 6.3×6.0 0.44 230 6.3×7.7 0.34 280 CE-BS
CE-BSS
100 6.3×6.0 0.44 230 → 6.3×6.0 0.44 230 6.3×7.7 0.34 280 8×10.2 0.17 450 8×10.2 0.39 300
CE-FE
6.3×6.0 0.44 230 6.3×6.0 0.44 230 6.3×7.7 0.34 280 8×10.2 0.17 450 8×10.2 0.17 450 10×10.2 0.21 450
CE-LD
150
→ 10×7.7 0.17 450 CE-FSS
6.3×6.0 0.44 230 6.3×7.7 0.34 280 6.3×7.7 0.34 280 8×10.2 0.17 450 8×10.2 0.17 450 10×10.2 0.21 450 CE-FS
220 CE-FS
（High Voltage）
10×7.7 0.17 450
CE-FH
6.3×7.7 0.34 280 8×10.2 0.17 450 8×10.2 0.17 450 8×10.2 0.17 450 10×10.2 0.090 670 12.5×13.5 0.14 620
CE-AX
330
→ 10×7.7 0.17 450 CE-KX
390 12.5×13.5 0.14 620 CE-ZX
CE-ZC
8×10.2 0.17 450 8×10.2 0.17 450 8×10.2 0.17 450 10×10.2 0.090 670 12.5×13.5 0.066 900
470 CE-LX
10×7.7 0.17 450
CE-GA
8×10.2 0.17 450 → 10×10.2 0.090 670 12.5×13.5 0.066 900 CE-LS
680
10×7.7 0.17 450 CE-LH
（High Voltage）
CE-LH
1000 8×10.2 0.17 450 10×10.2 0.090 670 12.5×13.5 0.066 900 16×16.5 0.078 790
CE-LL
1500 10×10.2 0.090 670 12.5×13.5 0.066 900 16×16.5 0.052 1250
CE-LF
2200 12.5×13.5 0.066 900 16×16.5 0.052 1250 CE-PC
3300 12.5×13.5 0.066 900 16×16.5 0.052 1250 CE-PH
CE-PS
4700 16×16.5 0.052 1250
CE-PF
6800 16×16.5 0.052 1250
CE-TH
→Please use the higher voltage model in the next. Case size:φDxL(mm) CE-JX
Please refer to page 14 for 10×7.7:CE-AXA mArms(100kHz, 105℃)
ripple current frequency coefficients. 16×16.5:CE-AXT
CE-NP
Impedance(Ω)
max. at 100kHz, 20℃ CE-FN
■ Part number AX AXA AXT

16 CE 470 AX 10 CE 470 AXA 10 CE 4700 AX T
51
CE-KX Series
Low Impedance
Mount Type
Surface
Capacitors
CE-ZX
（P.54）
10 to 20％ less impedance than CE-AX series at hight frequencies.
●
Low ESR
Long Life
● 105℃ 1,000 to 2,000hours ● Solvent proof (within 2 minutes) CE-LX CE-KX
● AEC-Q200 （P.56） Low Impedance
CE-AX
（P.50）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63 80 100
CE-BE Surge voltage (V) Room temperature 8.0 13 20 32 44 63 79 100 125

CE-BSS
φ4 to φ6.3 0.24 0.20 0.16 0.14 0.12 0.12 0.10 0.08 0.07
CE-FE tanδ
（max.）
CE-LD 120Hz/20℃
CE-FSS
Leakage current
CE-FS
CE-FH
CE-AX Test φ4 to φ6.3 : 1,000hours, φ8 to φ16 : 2,000hours
CE-KX
105℃
CE-ZX Endurance
CE-LX
CE-GA
CE-LS
CE-LH
[ φD≤10 ]
CE-LL 0.3max.
D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
Polarity W
CE-LF
(Cathode) 4 6.0 4.3 4.3 5.0 0.5 to 0.8 1.0
Lot No.
5 6.0 5.3 5.3 6.0 0.5 to 0.8 1.4
470 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
(P)
CE-PH Series Symbol

H
16 K
CE-PS
CE-PF [ φD≥12.5 ] L 8 10.2 8.3 8.3 9.0 0.7 to 1.0 3.2

Polarity R (＋)
CE-TH (Cathode) 10 10.2 10.3 10.3 11.0 1.0 to 1.4 4.6
Lot No. A pressure relief vent is provided
CE-JX Indicated Only φD=16 for φD=8 or bigger 12.5 13.5±0.5 12.8 12.8 13.5 1.0 to 1.4 4.6
9DT
CE-NP 3300 Rated Capacitance (P)reference size 16 16.5±0.5 16.3 16.3 17.3 1.7 to 2.1 7.0
Series Symbol
16 K
52

V
6.3 10 16 25 35
Capacitors
Mount Type
Surface
μF
4.7 4×6.0 1.45 90

10 4×6.0 1.45 90 5×6.0 0.70 170
15 4×6.0 1.45 90 5×6.0 0.70 170 5×6.0 0.70 170
22 4×6.0 1.45 90 5×6.0 0.70 170 5×6.0 0.70 170 5×6.0 0.70 170
27 4×6.0 1.45 90
33 → 5×6.0 0.70 170 → 6.3×6.0 0.39 250 6.3×6.0 0.39 250
47 5×6.0 0.70 170 → 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250
56 5×6.0 0.70 170 6.3×6.0 0.39 250
68 → 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×7.7 0.30 300 CE-BE
100 6.3×6.0 0.39 250 → 6.3×6.0 0.39 250 6.3×7.7 0.30 300 8×10.2 0.15 600 CE-BD
150 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×7.7 0.30 300 8×10.2 0.15 600 8×10.2 0.15 600 CE-BS
220 6.3×6.0 0.39 250 6.3×7.7 0.30 300 6.3×7.7 0.30 300 8×10.2 0.15 600 8×10.2 0.15 600 CE-BSS
330 6.3×7.7 0.30 300 8×10.2 0.15 600 8×10.2 0.15 600 8×10.2 0.15 600 10×10.2 0.080 850 CE-FE
470 8×10.2 0.15 600 8×10.2 0.15 600 8×10.2 0.15 600 10×10.2 0.080 850 12.5×13.5 0.058 1150 CE-LD
680 8×10.2 0.15 600 → 10×10.2 0.080 850 12.5×13.5 0.058 1150 CE-FSS
1000 8×10.2 0.15 600 10×10.2 0.080 850 12.5×13.5 0.058 1150 16×16.5 0.035 1800 CE-FS
1500 10×10.2 0.080 850 12.5×13.5 0.058 1150 16×16.5 0.035 1800 CE-FS
（High Voltage）
2200 12.5×13.5 0.058 1150 16×16.5 0.035 1800 CE-FH
3300 12.5×13.5 0.058 1150 16×16.5 0.035 1800 CE-AX
4700 16×16.5 0.035 1800 CE-KX
6800 16×16.5 0.035 1800 CE-ZX
CE-ZC
CE-LX
CE-GA
V
μF 50 63 80 100
CE-LS
2.2 6.3×6.0 2.70 42
CE-LH
3.3 6.3×6.0 2.40 45
（High Voltage）
CE-LH
4.7 4×6.0 2.55 64 5×6.0 2.00 55 6.3×6.0 2.40 45 6.3×6.0 2.40 45
CE-LL
10 6.3×6.0 0.52 215 6.3×6.0 1.00 90 6.3×7.7 2.00 65 6.3×7.7 2.00 65
CE-LF
22 6.3×6.0 0.52 215 6.3×7.7 0.80 135 8×10.2 0.90 140 8×10.2 0.90 140
CE-PC
33 6.3×7.7 0.44 243 8×10.2 0.35 280 8×10.2 0.90 140 10×10.2 0.50 220
CE-PH
47 6.3×7.7 0.44 243 8×10.2 0.35 280 10×10.2 0.50 220 12.5×13.5 0.24 500
CE-PS
68 8×10.2 0.35 280 12.5×13.5 0.24 500 12.5×13.5 0.24 500
CE-PF
100 8×10.2 0.22 400 10×10.2 0.20 480 12.5×13.5 0.24 500 16×16.5 0.14 800
CE-TH
150 12.5×13.5 0.24 500 16×16.5 0.14 800
CE-JX
220 10×10.2 0.13 585 12.5×13.5 0.14 800
CE-NP
330 12.5×13.5 0.10 800 16×16.5 0.14 800
CE-FN
470 16×16.5 0.065 1410
1000 16×16.5 0.060 1610
→Please use the higher voltage model in the next.
ripple current frequency coefficients. 16×16.5:CE-KXT mArms(100kHz, 105℃)
Impedance(Ω)
■ Part number KX KXT

16 CE 470 KX 16 CE 3300 KX T
Type code Type code
53
CE-ZX Series
Super Low ESR
Mount Type
Surface
Capacitors
30 to 50% less ESR than CE-KX series at high frequencies.

●
Low ESR
105℃ 2,000hours ● Solvent proof (within 2 minutes)
● CE-ZX CE-KX
（P.52）
● AEC-Q200 Small
CE-ZC
（P.55）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50

CE-BSS Dissipation Factor（tan δ） tanδ
（max.）120Hz/20℃ 0.26 0.19 0.16 0.14 0.12 0.10
CE-FE
Leakage current
CE-LD
CE-FSS
CE-FS
105℃, 2,000hours △C/C Within ±30% of the initial value
CE-FS（High Voltage）
Endurance rated voltage applied
CE-FH tanδ Less than 200% of the specified value
(With the rated
CE-KX
CE-ZX
CE-ZC ■ Marking, Dimensions (Unit : mm)

CE-LX Polarity 0.3max. W D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
(Cathode)
CE-GA Lot No.
6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-LS 9D Rated Capacitance
100 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
CE-LH Series Symbol

(P)
C ZX
H
Rated Voltage 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2

6.3V:6, 10V:A, 16V:C 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
CE-LL 25V:E, 35V:V, 50V:H L
R (＋) 10 13.5±0.5 10.3 10.3 11.0 1.0 to 1.4 4.6
CE-LF
A pressure relief vent is provided
CE-PC for φD=8 or bigger
CE-PS
CE-PF
V
CE-TH μF 6.3 10 16 25 35 50
CE-JX 33 6.3×6.0 0.26 300 6.3×6.0 0.26 300
CE-NP 47 6.3×6.0 0.26 300 6.3×6.0 0.26 300 6.3×6.0 0.26 300
CE-FN 68 6.3×6.0 0.26 300 6.3×6.0 0.26 300 6.3×7.7 0.16 600
6.3×6.0 0.26 300 6.3×6.0 ★1 0.26 300 6.3×7.7 0.16 600 6.3×7.7 ★1 0.16 600
100
6.3×7.7 0.16 600 8×10.5 0.08 850 8×10.5 0.18 670
150 6.3×6.0 0.26 300 6.3×7.7 0.16 600 8×10.5 0.08 850 8×10.5 0.08 850
220 6.3×6.0 0.26 300 6.3×7.7 0.16 600 6.3×7.7 0.16 600 8×10.5 0.08 850 8×10.5 0.08 850 10×10.5 0.12 900
330 6.3×7.7 0.16 600 8×10.5 0.08 850 8×10.5 0.08 850 8×10.5 0.08 850 10×10.5 0.06 1190 10×13.5 ★2 0.10 900
390 10×10.5 0.08 850
470 8×10.5 0.08 850 8×10.5 0.08 850 8×10.5 0.08 850 10×10.5 0.06 1190 10×13.5 ★2 0.06 1190
560 10×10.5 0.08 850
680 8×10.5 0.08 850 10×10.5 0.06 1190 10×13.5 ★2 0.06 1190
820 10×10.5 0.08 850
1000 8×10.5 0.08 850 10×10.5 0.06 1190 10×13.5 ★2 0.06 1190
1200 10×10.5 0.08 850
1500 10×10.5 0.06 1190 10×13.5 ★2 0.06 1190
1800 10×10.5 0.08 850
Please refer to page 14 for ripple current frequency coefficients. Case size:φDxL(mm) Rated ripple current
★1 ZXS ★2 ZXC mArms(100kHz, 105℃)
ESR（Ω）
■ Part number ZX ZXS ZXC

16 CE 100 ZX 16 CE 100 ZXS 16 CE 1000 ZXC
54
CE-ZC Series
Super Low ESR
Capacitors
Mount Type
Surface
CE-ZX
（P.54）
105℃ 2,000hours
●
Small φ6.3×7.7
● Solvent proof (within 2 minutes) CE-ZC
● AEC-Q200
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
Surge voltage (V) Room temperature 8 13 20 32 44 63 CE-BE
CE-BSS
0.26 0.19 0.16 0.14 0.12 0.10
（max.）120Hz/20℃ CE-FE
Exceeding 1,000μF, ＋0,02 every 1,000μF
CE-LD
Leakage current
CE-FSS
CE-FS
Iow temperature 120Hz, ＋20℃ −55℃ Z/Z20℃ 4 4 4 3 3 3 CE-FS
（High Voltage）
105℃, 2,000hours △C/C Within ±30% of the initial value CE-FH

(With the rated tanδ Less than 200% of the specified value CE-AX
ripple current) LC Less than the specified value CE-KX
CE-ZX

CE-ZC
CE-LX
Polarity 0.3max. W D ±0.5
L±0.3
W ±0.2
H ±0.2
C±0.2
R P
(Cathode)
Lot No. CE-GA
6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
9D Rated Capacitance CE-LS
560 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
Series Symbol CE-LH

(P)
V ZC
H
Rated Voltage 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2

（High Voltage）
CE-LH
6.3V:6, 10V:A, 16V:C 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
25V:E, 35V:V, 50V:H L CE-LL
R (＋)
CE-LF
for φD=8 or bigger CE-PC
(P)reference size CE-PH
CE-PS
■ Size, ESR, Rated Ripple Current CE-PF
V
μF 6.3 10 16 25 35 50 CE-TH
68 6.3×6.0 0.28 300 CE-JX
100 6.3×6.0 0.28 300 6.3×6.0 0.28 300 CE-NP
150 6.3×6.0 0.28 300 6.3×7.7 0.16 600 6.3×7.7 0.16 600
CE-FN
220 6.3×6.0 0.28 300 6.3×6.0 0.28 300 6.3×7.7 0.16 600
330 6.3×6.0 0.28 300 6.3×7.7 0.16 600 8×10.5 0.08 850 10×10.5 0.12 900
470 8×10.5 0.08 850
560 10×10.5 0.06 1190
680 8×10.5 0.08 850
820 10×10.5 0.06 1190
1000 8×10.5 0.08 850 10×10.5 0.06 1190
1500 8×10.5 0.08 850 10×10.5 0.06 1190
2200 10×10.5 0.06 1190
ESR（Ω）
■ Part number
35 CE 560 ZC
Series code
Rated capacitance
Type code
Rated voltage
55
CE-LX Series
Low Impedance
Long Life
Mount Type
Surface
Capacitors
105℃ 2,000 to 5,000hours

●
Long Life
● CE-LL CE-LX
● AEC-Q200 （P.62）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63 80 100
CE-BE Surge voltage (V) Room temperature 8.0 13 20 32 44 63 79 100 125

CE-BSS
φ4 to φ6.3 0.26 0.20 0.16 0.14 0.12 0.12 0.08 ーー
CE-FE tanδ
（max.）
CE-LD 120Hz/20℃
CE-FSS
Leakage current
CE-FS

CE-FH
CE-AX Test φ4 to φ6.3, φ10 × 7.7 : 2,000hours, φ8 to φ18 : 5,000hours
CE-KX
105℃
CE-ZX Endurance
CE-LX
CE-GA
CE-LS
CE-LH
[ φD≤10 ]
CE-LL 0.3max.
D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
Polarity W
CE-LF (Cathode) 4 6.0 4.3 4.3 5.0 0.5 to 0.8 1.0
Lot No.
CE-PC 5 6.0 5.3 5.3 6.0 0.5 to 0.8 1.4
φD
470 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2

(P)
CE-PH
C
H
Series Symbol
16 L 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-PS Rated Voltage(6.3V→6)
CE-PF L 8 10.2 8.3 8.3 9.0 0.7 to 1.0 3.2

[ φD≥12.5 ] R (＋)
CE-TH 10 7.7 10.3 10.3 11.0 1.0 to 1.4 4.6
Polarity
CE-JX
(Cathode) Lot No.
A pressure relief vent is provided 10 10.2 10.3 10.3 11.0 1.0 to 1.4 4.6
Indicated φD=16, 18 for φD=8 or bigger
CE-NP 9DT 10 13.5±0.5 10.3 10.3 11.0 1.0 to 1.4 4.6
Rated Capacitance (P)reference size
3300 12.5 13.5±0.5 12.8 12.8 13.5 1.0 to 1.4 4.6
CE-FN Series Symbol
16 L
Rated Voltage(6.3V→6) 16 16.5±0.5 16.3 16.3 17.3 1.7 to 2.1 7.0
18 16.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0
18 21.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0
■ Part number LX LXA LXS

16 CE 470 LX 16 CE 330 LXA 35 CE 100 LXS
LXC LXT
35 CE 470 LXC 16 CE 3300 LX T
Type code Type code
56

V
6.3 10 16 25 35
Capacitors
Mount Type
Surface
μF
4.7 4×6.0 1.45 90

10 4×6.0 1.45 90 5×6.0 0.70 170
15 4×6.0 1.45 90 5×6.0 0.70 170 5×6.0 0.70 170
22 4×6.0 1.45 90 5×6.0 0.70 170 5×6.0 0.70 170 5×6.0 0.70 170
27 4×6.0 1.45 90 5×6.0 0.70 170 5×6.0 0.70 170 6.3×6.0 0.39 250 6.3×6.0 0.39 250
33 5×6.0 0.70 170 5×6.0 0.70 170 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250
47 5×6.0 0.70 170 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250
56 5×6.0 0.70 170 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×7.7 0.30 300
68 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×7.7 0.30 300 CE-BE
5×6.0 ★2 0.70 170 6.3×7.7 ★2 0.30 300 CE-BD

100
6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×7.7 0.30 300 8×10.2 0.17 600 CE-BS
6.3×6.0 0.39 250 6.3×6.0 0.39 250 6.3×7.7 0.30 300 8×10.2 0.17 600 8×10.2 0.17 600 CE-BSS
150
10×7.7 ★1 0.17 600 CE-FE
6.3×6.0 0.39 250 6.3×7.7 0.30 300 6.3×7.7 0.30 300 8×10.2 0.17 600 8×10.2 0.17 600 CE-LD
220
10×7.7 ★1 0.17 600 CE-FSS
6.3×7.7 0.30 300 8×10.2 0.17 600 8×10.2 0.17 600 8×10.2 0.17 600 10×10.2 0.090 850 CE-FS
330
10×7.7 ★1 0.17 600 CE-FS
（High Voltage）
8×10.2 0.17 600 8×10.2 0.17 600 8×10.2 0.17 600 10×10.2 0.090 850 10×13.5 ★3 0.070 950 CE-FH
470
10×7.7 ★1 0.17 600 12.5×13.5 0.060 1100 CE-AX
8×10.2 0.17 600 10×10.2 0.090 850 10×10.2 0.090 850 10×13.5 ★3 0.070 950 CE-KX
680
10×7.7 ★1 0.17 600 12.5×13.5 0.060 1100 12.5×13.5 0.060 1100 CE-ZX
10×13.5 ★3 0.070 950 CE-ZC

1000
8×10.2 0.17 600 10×10.2 0.090 850 12.5×13.5 0.060 1100 12.5×13.5 0.060 1100 16×16.5 0.035 1800 CE-LX
10×13.5 ★3 0.070 950 CE-GA

1500
10×10.2 0.090 850 12.5×13.5 0.060 1100 12.5×13.5 0.060 1100 16×16.5 0.035 1800 16×16.5 0.035 1800 CE-LS
2200 12.5×13.5 0.060 1100 12.5×13.5 0.060 1100 16×16.5 0.035 1800 18×16.5 0.033 2060 CE-LH
2700 18×21.5 0.028 2260 （High Voltage）

CE-LH
3300 16×16.5 0.035 1800 18×16.5 0.033 2060 CE-LL
3900 18×21.5 0.028 2260 CE-LF
4700 16×16.5 0.035 1800 18×16.5 0.033 2060 CE-PC
5600 18×21.5 0.028 2260 CE-PH
6800 16×16.5 0.035 1800 18×16.5 0.033 2060 CE-PS
8200 18×16.5 0.033 2060 18×21.5 0.028 2260 CE-PF
10000 18×16.5 0.033 2060 CE-TH
12000 18×21.5 0.028 2260 CE-JX
CE-NP
CE-FN
V
μF 50 63 80 100
4.7 4×6.0 2.90 60
10 6.3×6.0 0.88 165 6.3×6.0 1.50 80
22 6.3×6.0 0.88 165 6.3×7.7 1.20 120
27 6.3×7.7 0.68 195
33 6.3×7.7 0.68 195 10×10.2 0.65 200
47 6.3×7.7 0.68 195 10×7.7 ★1 0.70 200 10×10.2 0.65 200 12.5×13.5 0.32 500
56 8×10.2 0.34 350
68 8×10.2 0.34 350 12.5×13.5 0.32 500
8×10.2 0.34 350 12.5×13.5 0.16 800 12.5×13.5 0.32 500 16×16.5 0.17 793
100
10×7.7 ★1 0.34 330
150 10×10.2 0.18 670 12.5×13.5 0.16 800 12.5×13.5 0.32 500 16×16.5 0.17 793
220 10×10.2 0.18 670 12.5×13.5 0.16 800 18×16.5 0.153 917
330 12.5×13.5 0.12 900 16×16.5 0.082 1410 16×16.5 0.17 793 18×21.5 0.083 1230
470 16×16.5 0.073 1610 16×16.5 0.082 1410 18×16.5 0.153 917
680 16×16.5 0.073 1610 18×16.5 0.080 1690
1000 16×16.5 0.073 1610 18×21.5 0.055 1960
1200 18×16.5 0.068 1900
1500 18×21.5 0.042 2180
ripple current frequency coefficients. Case size:φDxL(mm) Impedance(Ω) Rated ripple current
φ16, φ18:CE-LXT max. at 100kHz, 20℃ mArms(100kHz, 105℃)
★1 LXA
★2 LXS
★3 LXC
57
CE-GA Series
Low Impedance
5.4mm Height
Mount Type
Surface
Capacitors
CE-AX
（P.50）
105℃ 1,000hours
●
Low Impedance
● Solvent proof (within 2 minutes) CE-GA
● AEC-Q200 Low Impedance
CE-FS
（P.46）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63
CE-BE Surge voltage (V) Room temperature 8.0 13 20 32 44 63 79

CE-BSS
（max.）120Hz/20℃ 0.24 0.20 0.16 0.14 0.12 0.12 0.12
CE-FE
Leakage current
CE-LD
CE-FSS Impedance ratio at Based on the value at −40℃ Z/Z20℃ 3 2 2 2 2 2 2

CE-FS
(With the rated
CE-KX
CE-ZX
CE-ZC
CE-LX ■ Marking, Dimensions (Unit : mm)

CE-GA
D±0.5 L −0.2 W±0.2 H±0.2 C±0.2 R P
＋0.1
CE-LS
Polarity 0.3max. W
(Cathode)
Lot No. 4 5.4 4.3 4.3 5.0 0.5 to 0.8 1.0
CE-LH
CE-LH（High Voltage） 33
Series Symbol 6.3 5.4 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
16 G
(P)
H
CE-LL Rated Voltage(6.3V→6)

CE-LF
L
CE-PC R (＋)
CE-PS
CE-PF
CE-TH
V
CE-JX μF 6.3 10 16 25 35 50 63
CE-NP 1.0 4 3.1 68 4 7.4 37 4 8.0 20
CE-FN 2.2 4 2.9 68 4 6.6 45 4 8.0 24
3.3 4 2.7 68 4 5.4 52 5 3.5 40
4.7 4 2.3 68 4 2.3 68 5 2.9 75 5 3.5 40
10 4 2.3 68 5 1.1 105 5 1.1 105 6.3 1.3 120 6.3 1.6 65
22 4 2.3 68 5 1.1 105 5 1.1 105 6.3 0.6 155 6.3 0.6 155 6.3 1.3 120
33 5 1.1 105 5 1.1 105 6.3 0.6 155 6.3 0.6 155 6.3 0.6 155
47 5 1.1 105 6.3 0.6 155 6.3 0.6 155 6.3 0.6 155 6.3 0.6 155
100 6.3 0.6 155 6.3 0.6 155 6.3 0.6 155
220 6.3 0.6 155
Please refer to page 14 for ripple current frequency coefficients. Rated ripple current
Impedance(Ω)
max. at 100kHz, 20℃ mArms(100kHz, 105℃)
Case size:φD(mm)
■ Part number
16 CE 33 GA
Series code
Rated capacitance
Type code
Rated voltage
58
CE-LS Series
Low Impedance
Long Life
Capacitors
Mount Type
Surface
105℃ 3,000hours
●
Long Life
● CE-LS CE-AX
（P.50）
● AEC-Q200
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
CE-BSS
（max.）120Hz/20℃ 0.28 0.24 0.22 0.16 0.13 0.12
CE-FE
Leakage current
CE-LD
CE-FSS
CE-FS

（High Voltage）
tanδ Less than 300% of the specified value CE-FH
(With the rated
CE-KX
CE-ZX
CE-ZC

CE-LX
CE-GA
D±0.5
L±0.3
W ±0.2
H ±0.2
C±0.2
R P
Polarity 0.3max. W CE-LS
(Cathode)
Lot No. 5 6.0 5.3 5.3 6.0 0.5 to 0.8 1.4
CE-LH
220 （High Voltage）
CE-LH
6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
Series Symbol
(P)
16 S
H
Rated Voltage(6.3V→6) CE-LL
CE-LF
L
R (＋) CE-PC
CE-PS
CE-PF
■ Size, Impedance, Rated Ripple Current CE-TH
V
μF 6.3 10 16 25 35 50 CE-JX
10 5×6.0 1.30 95 6.3×6.0 2.00 70 CE-NP
22 5×6.0 1.30 95 5×6.0 1.30 95 6.3×6.0 0.70 140 6.3×6.0 2.00 70 CE-FN
33 5×6.0 1.30 95 6.3×6.0 0.70 140 6.3×7.7 1.35 100

47 5×6.0 1.30 95 5×6.0 1.30 95 6.3×6.0 0.70 140 6.3×6.0 0.70 140 6.3×7.7 0.60 230
100 6.3×6.0 0.70 140 6.3×6.0 0.70 140 6.3×6.0 0.70 140 6.3×7.7 0.60 230
150 6.3×6.0 0.70 140 6.3×7.7 0.60 230
220 6.3×7.7 0.60 230 6.3×7.7 0.60 230
330 6.3×7.7 0.60 230
Please refer to page 14 for ripple current frequency coefficients. Impedance(Ω) Rated ripple current
Case size:φDxL(mm)
■ Part number
16 CE 220 LS
Series code
Rated capacitance
Type code
Rated voltage
59
CE-LH Series
Long Life
Mount Type
Surface
Capacitors
105℃ 5,000hours
●
Long Life
● CE-LH CE-FH
（P.49）
● AEC-Q200
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50

CE-BSS
（max.）120Hz/20℃ 0.32 0.24 0.20 0.16 0.13 0.12
CE-FE
Leakage current（LC） μA/after 2minutes (max.) The greater value of either 0.01CV or 3
CE-LD

CE-FS
(With the rated
CE-KX
CE-ZX
CE-ZC

CE-GA Polarity
(Cathode) 0.3max. W D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
CE-LS Lot No.
4 6.0 4.3 4.3 5.0 0.5 to 0.8 1.0
100
Series Symbol
5 6.0 5.3 5.3 6.0 0.5 to 0.8 1.4
φD
CE-LH（High Voltage） A LH
(P)
6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2

H
Rated Voltage
CE-LL
6.3V:6, 10V:A, 16V:C
25V:E, 35V:V, 50V:H
6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-LF L
R (＋)
CE-PC
(P)reference size
CE-PH
CE-PS

CE-TH V
μF 6.3 10 16 25 35 50
CE-JX
1.0 4×6.0 6.2
CE-NP
2.2 4×6.0 11
CE-FN
3.3 4×6.0 14
4.7 4×6.0 15 5×6.0 19
10 4×6.0 18 5×6.0 25 5×6.0 25 6.3×6.0 30
22 5×6.0 30 5×6.0 30 6.3×6.0 42 6.3×6.0 42 6.3×7.7 49
33 5×6.0 35 5×6.0 35 6.3×6.0 48 6.3×6.0 48 6.3×7.7 57
47 5×6.0 36 6.3×6.0 50 6.3×6.0 50 6.3×7.7 63
100 6.3×6.0 60 6.3×7.7 81 6.3×7.7 81
220 6.3×7.7 101
mArms(120Hz, 105℃)
■ Part number
10 CE 100 LH
Series code
Rated capacitance
Type code
Rated voltage
60
CE-LH Series
105℃ Long Life
High Voltage
Capacitors
Mount Type
Surface
160 to 400V, 105℃ 5,000hours
●
Non solvent proof

●
● AEC-Q200
■ Specifications
Rated voltage (V) − 160 200 400
Surge voltage (V) Room temperature 200 250 450 CE-BE
CE-BSS
（max.）120Hz/20℃ 0.20 0.20 0.25
CE-FE
μA/after CV ≤ 1,000 0.03CV ＋15
Leakage current（LC） CE-LD
2minutes (max.) CV > 1,000 0.02CV ＋25
CE-FSS
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 3 3 6
CE-FS
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 6 6 10 CE-FS
（High Voltage）
105℃, 5,000hours △C/C Within ±30% of the initial value CE-FH

tanδ Less than 300% of the specified value CE-AX
(With the rated
ripple current) LC Less than the specified value CE-KX
CE-ZX
CE-ZC
CE-LX
■ Marking, Dimensions (Unit : mm) CE-GA
[ φD≤10 ] 0.3max. W D±0.5 L W±0.2 H±0.2 C±0.2 R P CE-LS
Polarity
(Cathode) 8 10.5±0.3 8.3 8.3 9.0 0.7 to 1.0 3.2 CE-LH
Lot No.
10 10.5±0.3 10.3 10.3 11.0 1.0 to 1.4 4.6 （High Voltage）
CE-LH
φD
10
(P)
12.5 13.5±0.5 12.8 12.8 13.5 1.0 to 1.4 4.6

H
Series Symbol CE-LL

2C L
Rated Voltage★ 16 16.5±0.5 16.3 16.3 17.3 1.7 to 2.1 7.0 CE-LF
L
[ φD≥12.5 ] R (＋) 18 16.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0 CE-PC
Polarity pressure relief vent
(Cathode) (P)reference size 18 21.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0 CE-PH
Lot No.
Indicated φD=16, 18 CE-PS
9DT
Rated Capacitance
47 CE-PF
Series Symbol
2D L
Rated Voltage★ CE-TH
★(160V : 2C, 200V : 2D, 400V : 2G) CE-JX
CE-NP
■ Size, Rated Ripple Current CE-FN
V
μF 160 200 400
2.2 8×10.5 25
3.3 8×10.5 31 10×10.5 36
4.7 8×10.5 37 10×10.5 38
10 10×10.5 43 10×10.5 43 12.5×13.5 57
22 12.5×13.5 112 12.5×13.5 112 16×16.5 115
27 18×16.5 125
33 12.5×13.5 137 12.5×13.5 137 18×21.5 160
47 16×16.5 180 16×16.5 180
16×16.5 215 16×16.5 215
68
18×16.5 ★ 270
82 16×16.5 235
100 18×16.5 320 18×21.5 330
120 18×21.5 340
★LHV Case size:φDxL(mm) Rated ripple current
φ16, φ18:CE-LHT mArms(120Hz, 105℃)
■ Part number LH LHV LHT

160 CE 10 LH 200 CE 68 LHV T 200 CE 47 LH T
Sn plating terminal option Sn plating terminal option
61
CE-LL Series
Low Impedance
Long Life
Mount Type
Surface
Capacitors
105℃ 7,000 to 10,000hours

●
Long Life
● CE-LL CE-LX
（P.56）
● AEC-Q200 Small
CE-LF
（P.63）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50

CE-BSS
（max.）120Hz/20℃ 0.32 0.28 0.26 0.16 0.14 0.14
CE-FE
Leakage current
CE-LD
Impedance ratio at Based on the value at
CE-FSS −25℃ Z/Z20℃ 4 3 2 2 2 2
Iow temperature 120Hz, ＋20℃
CE-FS Test φD ≥ 6.3 : 7,000hours, φD ≥ 8 : 10,000hours
CE-FS（High Voltage） 105℃
CE-FH Endurance
CE-AX ripple current)
CE-KX
CE-ZX
CE-ZC

CE-GA 0.3max. D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
Polarity
W
(Cathode)
CE-LS Lot No.
5 7.0 5.3 5.3 6.0 0.5 to 0.8 1.4
47 6.3 7.0 6.6 6.6 7.3 0.5 to 0.8 2.2
φD
Series Symbol
(P)
V LL
H
Rated Voltage 6.3 8.4 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-LL
6.3V:6, 10V:A, 16V:C 8 10.2 8.3 8.3 9.0 0.7 to 1.0 3.2
CE-LF 25V:E, 35V:V, 50V:H L
R (＋) 10 10.2 10.3 10.3 11.0 1.0 to 1.4 4.6
CE-PC
CE-PH for φD=8 or bigger
CE-PS (P)reference size
CE-PF
CE-TH ■ Size, Impedance, Rated Ripple Current

V
CE-JX
μF 6.3 10 16 25 35 50
CE-NP 10 5×7.0 2.2 95
CE-FN 22 5×7.0 2.2 95 5×7.0 2.2 95 5×7.0 2.2 95 6.3×8.4 1.8 100
33 5×7.0 2.2 95 6.3×7.0 1.1 140 6.3×8.4 1.0 230 8×10.2 0.53 350
47 5×7.0 2.2 95 6.3×7.0 1.1 140 6.3×7.0 1.1 140 6.3×8.4 1.0 230 8×10.2 0.53 350
100 6.3×7.0 1.1 140 6.3×7.0 1.1 140 6.3×8.4 1.0 230 8×10.2 0.22 600 10×10.2 0.35 670
150 6.3×7.0 1.1 140 6.3×8.4 1.0 230 8×10.2 0.22 600
220 6.3×8.4 1.0 230 6.3×8.4 1.0 230 8×10.2 0.22 600 10×10.2 0.16 850
330 6.3×8.4 1.0 230 8×10.2 0.22 600 10×10.2 0.16 850
470 8×10.2 0.22 600 10×10.2 0.16 850
1000 10×10.2 0.16 850
Impedance(Ω) Rated ripple current
ripple current frequency coefficients. max. at 100kHz, 20℃ mArms(100kHz, 105℃)
Case size:φDxL(mm)
■ Part number
35 CE 47 LL
Series code
Rated capacitance
Type code
Rated voltage
62
CE-LF Series
Low Impedance
Long Life
Capacitors
Mount Type
Surface
CE-LL（P.62）
105℃ 7,000hours
●
Small
● Solvent proof (within 2 minutes) CE-LF
● AEC-Q200
■ Specifications
Surge voltage (V) Room temperature 20 32 44 63 CE-BE
CE-BSS
（max.）120Hz/20℃ 0.26 0.16 0.14 0.14
CE-FE
Leakage current
CE-LD
Impedance ratio at Based on the value at
−25℃ Z/Z20℃ 2 2 2 2 CE-FSS
△C/C Within ±30% of the initial value CE-FS
105℃, 7,000hours
Endurance rated voltage applied CE-FS
（High Voltage）
(With the rated
CE-FH
ripple current) LC Less than the specified value
CE-AX
CE-KX
CE-ZX
CE-ZC
Polarity
(Unit : mm) CE-GA
(Cathode)
Lot No. 0.3max. W D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P CE-LS
9D Rated Capacitance 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2 CE-LH
220
V LF
Series Symbol 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6 （High Voltage）
CE-LH
φD
(P)
Rated Voltage
H
CE-LL
16V:C, 25V:E
35V:V, 50V:H
CE-LF
L
R (＋) CE-PC
CE-PS
CE-PF
■ Size, Impedance, Rated Ripple Current CE-TH
V
μF 16 25 35 50 CE-JX
100 8×10.5 0.53 350 CE-NP
220 8×10.5 0.22 600 CE-FN
330 8×10.5 0.22 600 10×10.5 0.16 850

470 8×10.5 0.22 600 10×10.5 0.16 850
Please refer to page 14 for ripple current frequency coefficients. Impedance(Ω)

■ Part number
35 CE 220 LF
Series code
Rated capacitance
Type code
Rated voltage
63
CE-PC Series
125℃
Mount Type
Surface
Capacitors
CE-PH
（P.66）
125℃ 1,000 to 2,000hours
●
Low ESR
125℃
● Solvent proof (within 2 minutes) CE-PC CE-FH
（P.49）
● AEC-Q200
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63 100
CE-BE Surge voltage (V) Room temperature 8.0 13 20 32 44 63 79 125

CE-BSS
0.30 0.24 0.20 0.16 0.14 0.14 0.12 0.10
CE-FE Dissipation Factor（tan δ） tanδ
（max.）120Hz/20℃
CE-LD
Leakage current
CE-FSS
CE-FS Impedance ratio at Based on the value at −25℃ Z/Z20℃ 4 3 2 2 2 2 2 2

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 8 6 4 3 3 3 3 3
CE-FS（High Voltage）
CE-FH Test 6.3 to 50V 2,000hours. (φD=6.3 : 1,000hours.), 63 to 100V 1,500hours

125℃
CE-AX
Endurance
CE-KX (With the rated tanδ Less than 300% of the specified value
CE-ZX
ripple current)
CE-ZC
CE-LX
CE-GA
CE-LS
CE-LH
[ φD≤10 ]
CE-LL 0.3max.
D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
Polarity W
CE-LF
(Cathode) 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
Lot No.
6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
220 8 10.2 8.3 8.3 9.0 0.7 to 1.0 3.2
φD
(P)
CE-PH Series Symbol

H
25 C
CE-PS
Rated Voltage(6.3V→6) 10 10.2 10.3 10.3 11.0 1.0 to 1.4 4.6
CE-PF [ φD≥12.5 ] L 12.5 13.5±0.5 12.8 12.8 13.5 1.0 to 1.4 4.6
Polarity R (＋)
CE-TH (Cathode) 16 16.5±0.5 16.3 16.3 17.3 1.7 to 2.1 7.0
Lot No. A pressure relief vent is provided
CE-JX Indicated Only φD=16 for φD=8 or bigger
9DT
Rated Capacitance
CE-NP 2200 (P)reference size
Series Symbol
10 C
64

V
6.3 10 16 25
Capacitors
Mount Type
Surface
μF
33 6.3×6.0 1.6 70
47 6.3×6.0 1.6 70 6.3×6.0 1.6 70 6.3×7.7 0.90 110
6.3×7.7 ★ 0.90 110 6.3×7.7 ★ 0.90 110
100
6.3×6.0 1.6 70 6.3×7.7 0.90 110 8×10.2 0.40 160 8×10.2 0.40 160
6.3×7.7 ★ 0.90 110 8×10.2 ★ 0.40 160
220
6.3×7.7 0.90 110 8×10.2 0.40 160 8×10.2 0.40 160 10×10.2 0.30 296
10×10.2 ★ 0.30 296
330
8×10.2 0.40 160 8×10.2 0.40 160 10×10.2 0.30 296 12.5×13.5 0.12 550
470 8×10.2 0.40 160 10×10.2 0.30 296 12.5×13.5 0.12 550 12.5×13.5 0.12 550 CE-BE
680 10×10.2 0.30 296 12.5×13.5 0.12 550 12.5×13.5 0.12 550 12.5×13.5 0.12 550 CE-BD
1000 12.5×13.5 0.12 550 12.5×13.5 0.12 550 12.5×13.5 0.12 550 16×16.5 0.080 900 CE-BS
1500 12.5×13.5 0.12 550 12.5×13.5 0.12 550 16×16.5 0.080 900 16×16.5 0.080 900 CE-BSS
2200 12.5×13.5 0.12 550 16×16.5 0.080 900 16×16.5 0.080 900 CE-FE
3300 16×16.5 0.080 900 16×16.5 0.080 900 CE-LD
4700 16×16.5 0.080 900 CE-FSS
CE-FS
CE-FS
（High Voltage）
CE-FH
V
μF 35 50 63 100
CE-AX
2.2 6.3×6.0 3.5 45
CE-KX
3.3 6.3×6.0 3.5 45
CE-ZX
4.7 6.3×6.0 2.0 60 6.3×6.0 3.5 45
CE-ZC
10 6.3×6.0 1.6 70 6.3×6.0 2.8 50 8×10.2 1.0 70
CE-LX
22 6.3×6.0 1.6 70 6.3×7.7 2.0 80 8×10.2 1.0 100 8×10.2 1.0 70
CE-GA
6.3×7.7 ★ 2.0 80
33 CE-LS
6.3×7.7 0.90 110 8×10.2 0.70 140 8×10.2 1.0 100 10×10.2 0.80 115
CE-LH
6.3×7.7 ★ 0.90 110 8×10.2 ★ 0.70 140 8×10.2 ★ 1.0 100
47 （High Voltage）
CE-LH
8×10.2 0.40 160 10×10.2 0.50 247 10×10.2 0.50 150 12.5×13.5 0.33 350
CE-LL
8×10.2 ★ 0.40 160 10×10.2 ★ 0.50 247 10×10.2 ★ 0.50 150
100 CE-LF
10×10.2 0.30 296 12.5×13.5 0.23 490 12.5×13.5 0.25 350 16×16.5 0.24 500
CE-PC
10×10.2 ★ 0.30 296 12.5×13.5 ★ 0.25 350
220 CE-PH
12.5×13.5 0.12 550 12.5×13.5 0.23 490 16×16.5 0.18 500
CE-PS
12.5×13.5 ★ 0.23 490
330 CE-PF
12.5×13.5 0.12 550 16×16.5 0.15 800 16×16.5 0.18 500
CE-TH
12.5×13.5 ★ 0.12 550
470 CE-JX
16×16.5 0.080 900 16×16.5 0.15 800 16×16.5 0.18 500
CE-NP
680 16×16.5 0.080 900 16×16.5 0.15 800
CE-FN
1000 16×16.5 0.080 900
ripple current frequency coefficients. 16×16.5:CE-PCT mArms(100kHz, 125℃)
★ PCS ESR（Ω）
■ Part number PC PCS PCT

25 CE 220 PC 25 CE 220 PCS 10 CE 2200 PC T
65
CE-PH Series
125℃ Low ESR
High Ripple Current,
High Capacitance
Mount Type
Surface
Capacitors
CE-PS
（P.68）
125℃ 2,000 to 5,000hours
●
Long Life
High Cap.
63V
● Solvent proof (within 2 minutes) CE-PF CE-PH
● AEC-Q200 （P.69） Low ESR
CE-PC
（P.64）
■ Specifications
Rated voltage (V) − 16 25 35 50 63
CE-BE Surge voltage (V) Room temperature 20 32 44 63 79
CE-BSS 0.20 0.16 0.14 0.14 0.14

（max.）120Hz/20℃
CE-FE Exceeding 1,000μF, ＋0.02 every 1,000μF
CE-LD Leakage current

CE-FSS Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2 2 2 2

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 4 3 3 3 3
CE-FS
CE-FS（High Voltage） Test φ6.3 to φ10 : 2,000hours, φ12.5 : 3,000hours, φ16,φ18 : 5,000hours
125℃
Endurance
CE-AX
ripple current)
CE-ZX
CE-ZC [ φD≤10 ] 0.3max W D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
CE-LX Polarity
(Cathode) 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
CE-GA Lot No.
9D 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
Rated Capacitance
φD
CE-LS 680
(P)
8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2

C
H
Series Symbol
CE-LH C PH
Rated Voltage★ 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
CE-LH（High Voltage） L
[ φD≥12.5 ] R (＋) 12.5 13.5±0.5 12.8 12.8 13.5 1.0 to 1.4 4.6
CE-LL Polarity
(Cathode) A pressure relief vent is provided 16 16.5±0.5 16.3 16.3 17.3 1.7 to 2.1 7.0
CE-LF Lot No.
for φD=8 or bigger
Indicated φD=16, 18 18 16.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0
CE-PC 9DT (P)reference size
1000 Rated Capacitance 18 21.5±1.0 19.0 19.0 20.0 1.7 to 2.1 7.0
CE-PH V PH
Series Symbol
Rated Voltage★
CE-PS
★(16V:C, 25V:E, 35V:V, 50V:H, 63V:J)
CE-PF
CE-TH
CE-JX
CE-NP
CE-FN
66

V
16 25 35
Capacitors
Mount Type
Surface
μF
22 6.3×6.0 1.6 ー 110

6.3×6.0 ★ 1.6 ー 110
33
6.3×6.0 1.6 ー 110 6.3×7.7 0.45 5.0 200
47 6.3×6.0 1.6 ー 110 6.3×7.7 0.45 5.0 200
100 6.3×7.7 0.45 5.0 200 6.3×7.7 0.45 5.0 200 8×10.5 0.18 3.0 300
160 8×10.5 0.18 3.0 300
220 8×10.5 0.18 3.0 300 10×10.5 0.11 2.0 500
270 8×10.5 0.18 3.0 300
300 10×10.5 0.11 2.0 500 CE-BE
330 8×10.5 0.18 3.0 300 10×10.5 0.11 2.0 500 12.5×13.5 0.08 1.0 1200 CE-BD
390 8×10.5 0.18 3.0 300 CE-BS
470 10×10.5 0.11 2.0 500 10×10.5 0.11 2.0 500 12.5×13.5 0.08 1.0 1200 CE-BSS
620 12.5×13.5 0.08 1.0 1200 CE-FE
680 10×10.5 0.11 2.0 500 12.5×13.5 0.08 1.0 1200 16×16.5 0.05 0.5 1800 CE-LD
910 12.5×13.5 0.08 1.0 1200 CE-FSS
1000 12.5×13.5 0.08 1.0 1200 16×16.5 0.05 0.5 1800 16×16.5 0.05 0.5 1800 CE-FS
1500 12.5×13.5 0.08 1.0 1200 16×16.5 0.05 0.5 1800 18×16.5 0.045 0.45 2000 CE-FS
（High Voltage）
2200 16×16.5 0.05 0.5 1800 18×16.5 0.045 0.45 2000 18×21.5 0.04 0.4 2200 CE-FH
3300 18×16.5 0.045 0.45 2000 18×21.5 0.04 0.4 2200 CE-AX
3900 18×21.5 0.04 0.4 2200 CE-KX
CE-ZX
V CE-ZC
μF 50 63
CE-LX
10 6.3×6.0 2.0 ー 70 6.3×7.7 2.0 20 60
CE-GA
22 8×10.5 0.70 7.0 140
CE-LS
33 8×10.5 0.70 7.0 140
CE-LH
47 8×10.5 0.45 5.0 250 8×10.5 0.70 7.0 140
（High Voltage）
CE-LH
10×10.5 0.30 3.0 350 10×10.5 ★ 0.30 3.0 260
100 CE-LL
12.5×13.5 0.18 2.0 700
CE-LF
150 12.5×13.5 0.18 2.0 700
CE-PC
220 12.5×13.5 0.15 1.5 700 12.5×13.5 0.18 2.0 700
CE-PH
330 16×16.5 0.13 1.3 1000
CE-PS
470 16×16.5 0.09 0.9 1000 16×16.5 0.13 1.3 1000
CE-PF
680 18×16.5 0.07 0.7 1200
CE-TH
1000 18×21.5 0.05 0.5 1650
CE-JX
Please refer to page 14 for ripple current
frequency coefficients. Case size:φDxL(mm) Rated ripple current CE-NP
φ16, φ18:CE-PHT mArms(100kHz, 125℃)
★ PHS CE-FN
ESR（Ω） ESR（Ω）
max. at 100kHz, 20℃ max. at 100kHz, −40℃
■ Part number PH PHS PHT

16 CE 680 PH 35 CE 33 PHS 35 CE 1000 PH T
67
CE-PS Series
125℃ High Capacitance
Mount Type
Surface
Capacitors
125℃ 1,000 to 4,000hours

●

● CE-PS
● AEC-Q200 High Cap.
CE-PH
（P.66）
■ Specifications
Rated voltage (V) − 16 25 35
CE-BE Surge voltage (V) Room temperature 20 32 44

CE-BSS
（max.）120Hz/20℃ 0.20 0.16 0.14
CE-FE
Leakage current
CE-LD
CE-FSS Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2 2

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 4 3 3
CE-FS
CE-FS（High Voltage） Test φ6.3×6.0 : 1,000hours, φ6.3×7.7 to φ10×10.5 : 2,000hours, φ10×13.5 : 4,000hours
125℃
Endurance
ripple current)
CE-ZX
CE-ZC

CE-GA (Unit : mm)
Polarity 0.3max. W
(Cathode)
CE-LS Lot No. D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
CE-LH 9D Rated Capacitance 6.3 6.0 6.6 6.6 7.3 0.5 to 0.8 2.2
220
φD
CE-LH（High Voltage） Series Symbol

6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
(P)
V PS
H
Rated Voltage
CE-LL 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
(16V:C, 25V:E, 35V:V)
CE-LF L 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
R (＋)
CE-PC 10 13.5±0.5 10.3 10.3 11.0 1.0 to 1.4 4.6
CE-PH for φD=8 or bigger
CE-PS (P)reference size
CE-PF

CE-TH
CE-JX
V
CE-NP
μF 16 25 35
47 6.3×6.0 1.20 110
CE-FN
100 6.3×6.0 1.20 110 6.3×7.7 0.60 220
150 6.3×7.7 0.60 220
220 8×10.5 0.30 300
330 8×10.5 0.30 300 10×10.5 0.20 500
390 10×13.5 ★ 0.15 710
470 10×10.5 0.20 500 10×13.5 ★ 0.15 710
560 10×13.5 ★ 0.15 710
610 10×13.5 ★ 0.15 710
Please refer to page 14 for Case size:φDxL(mm)
ripple current frequency coefficients.
ESR（Ω）
★ PSC max. at 100kHz, 20℃
■ Part number PS PSC
35 CE 220 PS 25 CE 560 PSC
Type code Type code
68
CE-PF Series
125℃ Long Life
High Ripple Current
Capacitors
Mount Type
Surface
125℃ 4,000hours
●
Long Life
● CE-PF CE-PH
（P.66）
● AEC-Q200
■ Specifications
Surge voltage (V) Room temperature 32 44 CE-BE
CE-BSS
（max.）120Hz/20℃ 0.16 0.14
CE-FE
Leakage current
CE-LD
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2
CE-FSS
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 3 3
CE-FS

（High Voltage）
(With the rated
CE-KX
CE-ZX
CE-ZC
(Unit : mm) CE-GA

Polarity 0.3max. W
(Cathode)
Lot No. D±0.5
L±0.3
W ±0.2
H ±0.2
C ±0.2
R P CE-LS
9D CE-LH
Rated Capacitance 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
220
φD

CE-LH
10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
(P)
V PF
H
Rated Voltage
CE-LL
(25V:E, 35V:V)
L CE-LF
R (＋)
pressure relief vent CE-PC
(P)reference size
CE-PH
CE-PS
CE-PF

CE-TH
CE-JX
V
μF 25 35 CE-NP
100 8×10.5 0.30 300
CE-FN
150 8×10.5 0.30 300
220 10×10.5 0.20 500
330 10×10.5 0.20 500
ripple current frequency coefficients. ESR（Ω）
Case size:φDxL(mm)
■ Part number
35 CE 220 PF
Series code
Rated capacitance
Type code
Rated voltage
69
CE-TH Series
135℃
Mount Type
Surface
Capacitors
CE-JX（P.71）
135℃ 1,000 to 2,000hours
●
150℃
● Solvent proof (within 2 minutes) CE-TH
● AEC-Q200 135℃
CE-PH
（P.66）
■ Specifications
CE-BE Surge voltage (V) Room temperature 20 32 44 63

CE-BSS
（max.）120Hz/20℃ 0.23 0.18 0.16 0.16
CE-FE
Leakage current
CE-LD
CE-FSS Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2 2 2

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 4 3 3 3
CE-FS
CE-FS（High Voltage） Test 2,000hours(φ6.3×7.7 1,000hours)

135℃
Endurance
ripple current)
CE-ZX
CE-ZC

CE-GA [ φD≤10 ] 0.3max. W D±0.5 L±0.3 W±0.2 H±0.2 C±0.2 R P
CE-LS Polarity
(Cathode) 6.3 7.7 6.6 6.6 7.3 0.5 to 0.8 2.2
Lot No.
CE-LH
9D 8 10.5 8.3 8.3 9.0 0.7 to 1.0 3.2
φD
Rated Capacitance
(P)
H
330 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6

Series Symbol
CE-LL C TH
Rated Voltage★ 12.5 13.5±0.5 12.8 12.8 13.5 1.0 to 1.4 4.6
CE-LF L
[ φD=12.5 ] R (＋)
CE-PC Polarity
(Cathode)
CE-PH Lot No. for φD=8 or bigger
CE-PS 9D (P)reference size

Rated Capacitance
470
CE-PF Series Symbol
V TH
Rated Voltage
CE-TH
★(16V:C, 25V:E, 35V:V, 50V:H)
CE-JX
CE-NP
CE-FN ■ Size, ESR, Rated Ripple Current

V
μF 16 25 35 50
22 6.3×7.7 1.20 110
33 6.3×7.7 0.80 150
47 6.3×7.7 0.80 150 8×10.5 0.60 160
100 6.3×7.7 0.80 150 6.3×7.7 0.80 150 8×10.5 0.30 240 10×10.5 0.35 260
220 8×10.5 0.30 240 10×10.5 0.20 400 12.5×13.5 0.15 600
330 8×10.5 0.30 240 10×10.5 0.20 400 12.5×13.5 0.10 750
470 10×10.5 0.20 400 12.5×13.5 0.10 750
680 12.5×13.5 0.10 750
1000 12.5×13.5 0.10 750
ESR（Ω）
ripple current frequency coefficients.
max. at 100kHz, 20℃ Rated ripple current
Case size:φDxL(mm)
■ Part number
16 CE 330 TH
Series code
Rated capacitance
Type code
Rated voltage
70
CE-JX Series
150℃
Capacitors
Mount Type
Surface
150℃ 1,000hours
●

● CE-JX
● AEC-Q200 150℃
CE-TH
（P.70）
■ Specifications
Surge voltage (V) Room temperature 32 44 CE-BE
CE-BSS
（max.）120Hz/20℃ 0.16 0.14
CE-FE
Leakage current
CE-LD
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2
CE-FSS
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 3 3
CE-FS

（High Voltage）
(With the rated
CE-KX
CE-ZX
CE-ZC

CE-LX
[ φD=10 ] 0.3max. W CE-GA

D±0.5
L W ±0.2
H±0.2
C ±0.2
R P
Polarity CE-LS
±0.3
(Cathode) 10 10.5 10.3 10.3 11.0 1.0 to 1.4 4.6
Lot No.
±0.5 CE-LH
9D 12.5 13.5 12.8 12.8 13.5 1.0 to 1.4 4.6
φD
Rated Capacitance
(P)
（High Voltage）
CE-LH
H
220
Series Symbol
E JX CE-LL
Rated Voltage★
L CE-LF
[ φD=12.5 ] R (＋)
Polarity CE-PC
(Cathode)
(P)reference size
Lot No. CE-PH
9D CE-PS
Rated Capacitance
330
Series Symbol CE-PF
V JX
Rated Voltage★
CE-TH
★(25V:E, 35V:V)
CE-JX
CE-NP
■ Size, ESR, Rated Ripple Current CE-FN
V
μF 25 35
100 10×10.5 0.20 120
150 10×10.5 0.20 120
220 10×10.5 0.20 150 12.5×13.5 0.15 550
330 12.5×13.5 0.15 650 12.5×13.5 0.15 650
470 12.5×13.5 0.15 700
ripple current frequency coefficients. Case size:φDxL(mm) Rated ripple current
ESR（Ω）
■ Part number
25 CE 220 JX
Series code
Rated capacitance
Type code
Rated voltage
71
CE-NP Series
Bi-polar
5.4mm Height
Mount Type
Surface
Capacitors
85℃ 2,000hours
●

●
● AEC-Q200
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50

CE-BSS
（max.）120Hz/20℃ 0.26 0.22 0.20 0.20 0.20 0.18
CE-FE
Leakage current
（LC） μA/after 1minutes (max.) 0.03CV ＋ 6
CE-LD

CE-FS
CE-FS（High Voltage） 500hours×4(alternately) △C/C Within ±25% of the initial value

Endurance 85℃,rated voltage applied
(With the rated
CE-KX
CE-ZX
CE-ZC

CE-GA 0.3max. W
D±0.5 L −0.2 W±0.2 H±0.2 C±0.2 R P
＋0.1
CE-LS Lot No.

4 5.4 4.3 4.3 5.0 0.5 to 0.8 1.0
CE-LH
10 5 5.4 5.3 5.3 6.0 0.5 to 0.8 1.4
φD
Series Symbol
(P)
H
16 N
CE-LL
CE-LF L
R
CE-PC
(P)reference size
CE-PH
CE-PS

CE-TH V
μF 6.3 10 16 25 35 50
CE-JX
1.0 4 10
CE-NP
2.2 4 8.4 5 15
CE-FN
3.3 4 10 5 17 5 18
4.7 4 12 5 19 5 20 6.3 23
10 4 17 5 25 6.3 28 6.3 30 6.3 23
22 5 31 6.3 35 6.3 39 6.3 41
33 6.3 39 6.3 43 6.3 57
47 6.3 47
100 6.3 50
ripple current frequency coefficients. Case size:φD(mm) Rated ripple current
mArms(120Hz, 85℃)
■ Part number
16 CE 10 NP
Series code
Rated capacitance
Type code
Rated voltage
72
CE-FN Series
Bi-polar 105℃
5.4mm Height
Capacitors
Mount Type
Surface
105℃ 1,000hours
●

●
● AEC-Q200
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63
Surge voltage (V) Room temperature 8.0 13 20 32 44 63 79 CE-BE
CE-BSS
（max.）120Hz/20℃ 0.24 0.22 0.20 0.20 0.20 0.18 0.16
CE-FE
Leakage current
（LC） μA/after 1minute (max.) 0.03CV 6
CE-LD
Impedance ratio at Based on the value at −40℃ Z/Z20℃ 3 3 2 2 2 2 2
CE-FSS
CE-FS
500hours×2(alternately) △C/C Within ±25% of the initial value CE-FS

（High Voltage）
(With the rated
CE-KX
CE-ZX
■ Marking, Dimensions CE-ZC
CE-LX
(Unit : mm)
0.3max. W CE-GA
D L W H C R P
±0.5 ＋0.1 ±0.2 ±0.2 ±0.2
−0.2
Lot No.
CE-LS
9D 4 5.4 4.3 4.3 5.0 0.5 to 0.8 1.0
Rated Capacitance
10 CE-LH
5 5.4 5.3 5.3 6.0 0.5 to 0.8 1.4
φD
Series Symbol
(P)
H
16 F （High Voltage）
CE-LH
CE-LL
L
R CE-LF
(P)reference size CE-PC
CE-PH
■ Size, Rated Ripple Current CE-PS
V CE-PF
μF 6.3 10 16 25 35 50 63
CE-TH
1.0 4 7.0 4 7.0
CE-JX
2.2 4 5.9 5 10 5 10
CE-NP
3.3 4 7.0 5 12 5 13 6.3 13
CE-FN
4.7 4 8.0 5 13 5 14 6.3 16 6.3 16
10 4 12 5 17 6.3 20 6.3 21 6.3 18
22 5 22 6.3 25 6.3 27
33 6.3 27 6.3 30 6.3 40
47 6.3 33
ripple current frequency coefficients. Case size:φD(mm) Rated ripple current
mArms(120Hz, 105℃)
■ Part number
16 CE 10 FN
Series code
Rated capacitance
Type code
Rated voltage
73
Aluminum Electrolytic Type / Radial Lead Type RoHS compliance
ME-SWB Series
Standard
7mm Height
Lead Type
Radial
Capacitors
ME-HC
（P.78）
ME-SWB
■ Specifications
Rated voltage (V) − 4 6.3 10 16 25 35 50 63
ME-SWB Surge voltage (V) Room temperature 5.0 8.0 13 20 32 44 63 79

ME-UZ･SZ Category temperature range (℃) − −40 to ＋85
ME-UAX･SAX Capacitance tolerance (%) 120Hz/20℃ M : ±20
ME-SWG
（max.）120Hz/20℃ 0.35 0.24 0.20 0.16 0.14 0.12 0.10 0.10
ME-HC
Leakage current
ME-LS
ME-CZ Impedance ratio at Based on the value at −25℃ Z/Z20℃ 7 4 3 2 2 2 2 2

ME-CA
ME-CX 85℃, 2,000hours △C/C Within ±25% of the initial value

ME-AX Endurance tanδ Less than 200% of the specified value
(With the rated
ME-WX ripple current) LC Less than the specified value
ME-WA
ME-WL
ME-WG ■ Dimensions (Unit : mm)

ME-FX
F±0.5
sleeve φD 4 5 6.3
ME-PX φd±0.05
F 1.5 2.0 2.5
φD±0.5
ME-HPC･HPD
φd 0.45 0.45 0.45
ME-FC･FD
ME-FH
15min. 5min.
ME-SWN L＋1max. 20min.
ME-HWN

V
μF 4 6.3 10 16 25 35 50 63
1.0 4×7 10 4×7 10
2.2 4×7 15 4×7 17
3.3 4×7 16 4×7 17 4×7 18 4×7 21
4.7 4×7 19 4×7 20 4×7 23 5×7 26
10 4×7 25 4×7 28 5×7 30 5×7 34 6.3×7 43
22 4×7 31 4×7 35 4×7 39 5×7 52 6.3×7 54 6.3×7 60 6.3×7 65
33 4×7 26 4×7 39 4×7 43 5×7 57 6.3×7 63 6.3×7 65 6.3×7 70
47 4×7 34 4×7 47 5×7 59 5×7 68 6.3×7 70 6.3×7 75 6.3×7 80
100 5×7 61 5×7 71 6.3×7 80 6.3×7 91 6.3×7 100 6.3×7 105
220 6.3×7 82 6.3×7 103 6.3×7 110 6.3×7 110
330 6.3×7 100 6.3×7 110
470 6.3×7 110
mArms(120Hz, 85℃)
■ Part number
16 ME 33 SWB
Series code
Rated capacitance
Type code
Rated voltage
74
ME-UZ・SZ 5mm Height, Wide Temperature （ME-UZ）
Series 7mm Height, Wide Temperature （ME-SZ）
Capacitors
Lead Type
Radial
ME-UAX
（P.76） ME-SAX（P.76）
● ME-UZ : 105℃ 1,000hours, Solvent proof (within 2 minutes) Low Impedance Low Impedance
● ME-SZ : 105℃ 1,000hours, Solvent proof (within 3 minutes) ME-UZ ME-SZ
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
Surge voltage (V) Room temperature 8.0 13 20 32 44 63 ME-SWB
Category temperature range (℃) − −55 to ＋105 ME-UZ･SZ
Capacitance tolerance (%) 120Hz/20℃ M : ±20 ME-UAX･SAX
ME-SWG
（max.）120Hz/20℃ 0.24 0.20 0.16 0.14 0.12 0.10
ME-HC
Leakage current
ME-LS
ME-CZ
ME-CA
105℃, 1,000hours △C/C Within ±25% of the initial value ME-CX
Endurance tanδ Less than 200% of the specified value ME-AX
(With the rated
ripple current) LC Less than the specified value ME-WX
ME-WA
■ Dimensions (Unit : mm)

ME-WL
ME-WG
F±0.5
sleeve φD 4 5 6.3
φd±0.05 ME-FX
F 1.5 2.0 2.5
φD±0.5
ME-PX
φd 0.45 0.45 0.45
ME-HPC･HPD
ME-FC･FD
15min. 5min.
L＋1max. 20min. ME-FH
ME-SWN
■ Size, Impedance, Rated Ripple Current ME-HWN
●ME-UZ series
V
μF 6.3 10 16 25 35 50
10 6.3×5 2.0 70
22 6.3×5 1.6 100 6.3×5 2.0 70 6.3×5 2.0 70
33 6.3×5 1.6 100 6.3×5 1.6 100 6.3×5 2.0 70
47 6.3×5 1.6 100 6.3×5 1.6 100 6.3×5 1.6 100 6.3×5 2.0 70
100 6.3×5 1.6 100 6.3×5 1.6 100 6.3×5 1.6 100
220 6.3×5 1.6 100
●ME-SZ series
V
μF 6.3 10 16 25 35 50
1.0 4×7 10 30
2.2 4×7 7.8 35
3.3 4×7 6.2 40
4.7 4×7 4.2 50 4×7 6.0 40 5×7 3.1 70
10 4×7 4.2 50 5×7 2.0 85 5×7 3.1 70 6.3×7 1.6 100
22 4×7 4.2 50 5×7 2.0 85 5×7 2.0 85 6.3×7 1.2 120 6.3×7 1.6 100 6.3×7 1.6 100
33 5×7 2.0 85 5×7 2.0 85 6.3×7 1.2 120 6.3×7 1.2 120 6.3×7 1.6 100 6.3×7 1.6 100
47 5×7 2.0 85 6.3×7 1.2 120 6.3×7 1.2 120 6.3×7 1.2 120 6.3×7 1.6 100 6.3×7 1.6 100
100 6.3×7 1.2 120 6.3×7 1.2 120 6.3×7 1.2 120 6.3×7 1.2 120 6.3×7 1.6 100
220 6.3×7 1.2 120 6.3×7 1.2 120 6.3×7 1.2 120
330 6.3×7 1.2 120
Impedance(Ω)
ripple current frequency coefficients. max. at 100kHz, 20℃
■ Part number UZ SZ
16 ME 33 UZ 16 ME 10 SZ
Type code Type code
75
ME-UAX・SAX Low Impedance （ME-UAX）
Series 5mm Height(UAX), 7mm Height(SAX) （ME-SAX）

Lead Type
Radial
Capacitors
ME-SWG
（P.77）
● ME-UAX : 105℃ 1,000hours, Solvent proof (within 2 minutes) Low ESR
● ME-SAX : 105℃ 1,000hours, Solvent proof (within 3 minutes) ME-UAX ME-SAX
Low Impedance Low Impedance
ME-UZ
（P.75） ME-SZ（P.75）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35
ME-SWB Surge voltage (V) Room temperature 8.0 13 20 32 44
ME-SWG Dissipation Factor（tan δ） tanδ

（max.）120Hz/20℃ 0.24 0.20 0.16 0.14 0.12
ME-HC Leakage current

ME-LS Impedance ratio at Based on the value at −40℃ Z/Z20℃ 3 2 2 2 2

ME-CZ
ME-CA
ME-CX Endurance tanδ Less than 200% of the specified value
(With the rated
ME-AX ripple current) LC Less than the specified value
ME-WX
ME-WA ■ Dimensions (Unit : mm)

F±0.5
ME-WL sleeve φD 4 5 6.3

φd±0.05
ME-WG F 1.5 2.0 2.5
φD±0.5
ME-FX φd 0.45 0.45 0.45

ME-PX
ME-HPC･HPD 15min. 5min.

ME-FC･FD
L＋1max. 20min.
ME-FH
ME-SWN ■ Size, Impedance, Rated Ripple Current

ME-HWN ●ME-UAX series
V
μF 6.3 10 16 25 35
33 6.3×5 0.44 230 6.3×5 0.44 230
47 6.3×5 0.44 230 6.3×5 0.44 230 6.3×5 0.44 230
56 6.3×5 0.44 230
68 6.3×5 0.44 230 6.3×5 0.44 230
100 6.3×5 0.44 230 6.3×5 0.44 230
150 6.3×5 0.44 230
220 6.3×5 0.44 230
●ME-SAX series
V
μF 6.3 10 16 25 35
4.7 4×7 1.15 90
10 4×7 1.15 90 5×7 0.49 160
15 4×7 1.15 90 5×7 0.49 160 6.3×7 0.29 280
22 4×7 1.15 90 5×7 0.49 160 5×7 0.49 160 6.3×7 0.29 280
33 5×7 0.49 160 5×7 0.49 160 6.3×7 0.24 280 6.3×7 0.29 280
47 5×7 0.49 160 5×7 0.49 160 6.3×7 0.24 280 6.3×7 0.24 280 6.3×7 0.29 280
68 6.3×7 0.24 280
100 6.3×7 0.24 280 6.3×7 0.24 280 6.3×7 0.29 280
150 6.3×7 0.24 280 6.3×7 0.29 280
220 6.3×7 0.24 280 6.3×7 0.29 280 6.3×7 0.29 280
330 6.3×7 0.29 280
Please refer to page 14 for Impedance(Ω) Rated ripple current
Case size:φDxL(mm)
■ Part number UAX SAX

16 ME 47 UAX 16 ME 22 SAX
Type code Type code
76
ME-SWG Series
Low ESR, Small
7mm Height
Capacitors
Lead Type
Radial
● 105℃ 1,000 to 2,000hours
● Non solvent proof ME-SWG
Low ESR
ME-SAX
（P.76）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35
Surge voltage (V) Room temperature 8.0 13 20 32 44 ME-SWB
（max.）120Hz/20℃ 0.24 0.20 0.16 0.14 0.12 ME-SWG
Leakage current（LC） μA/after 2minutes (max.) 0.03CV ME-HC
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2 2 2 2 ME-LS
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 3 3 3 3 3 ME-CZ
Test φ5 : 1,000hours, φ6.3 : 2,000hours, (6ME330SWG, 10ME220SWG : 1,000hours) ME-CA
105℃
rated voltage applied △C/C Within ±25% of the initial value(6.3V, 10V : ±30％) ME-CX
Endurance
(With the rated tanδ Less than 200% of the specified value ME-AX
ripple current)
LC Less than the specified value ME-WX
ME-WA
■ Dimensions (Unit : mm) ME-WL
F±0.5
sleeve φD 5 6.3 ME-WG

φd±0.05
F 2.0 2.5 ME-FX
φD±0.5
φd 0.45 0.45 ME-PX
ME-HPC･HPD
15min. 5min. ME-FC･FD

L＋1.5max. 20min. ME-FH
ME-SWN
ME-HWN

V
μF 6.3 10 16 25 35
22 5×7 0.17 390 5×7 0.17 390
39 5×7 0.17 390 5×7 0.17 390
47 6.3×7 0.082 760
56 5×7 0.17 390
100 5×7 0.17 390 6.3×7 0.082 760 6.3×7 0.082 760 6.3×7 0.082 760
150 6.3×7 0.082 760 6.3×7 0.082 760 6.3×7 0.082 760
220 6.3×7 0.082 760 6.3×7 0.082 760
330 6.3×7 0.082 760
ESR(Ω) Rated ripple current
Case size:φDxL(mm)
■ Part number
25 ME 100 SWG
Series code
Rated capacitance
Type code
Rated voltage
77
ME-HC Series
Standard
Lead Type
Radial
Capacitors
ME-CZ
（P.80）
● Solvent proof (within 5 minutes) 105℃
ME-HC
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63 100
ME-SWB Surge voltage (V) Room temperature 8.0 13 20 32 44 63 79 125
ME-SWG 0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.10

（max.）120Hz/20℃
ME-HC Exceeding 1,000μF, ＋0.02 every 1,000μF
ME-LS Leakage current

ME-CZ Impedance ratio at Based on the value at −25℃ Z/Z20℃ 5 4 3 2 2 2 2 2

ME-CA
ME-CX
(With the rated
ME-WA
ME-WL ■ Dimensions (Unit : mm)

F±0.5
ME-WG sleeve φD 5 6.3 8 10 12.5 16 18

φd±0.05
ME-FX F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD±0.5
ME-PX φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8

ME-HPC･HPD
ME-FC･FD 15min. 5min.

ME-FH L＋αmax. 20min.
ME-SWN α : L<20 α=1.5, L≥20 α=2.0

ME-HWN A pressure relief vent is provided for φD=6.3 or bigger

V
μF 6.3 10 16 25 35 50 63 100
2.2 5×11 20 5×11 20 5×11 30
3.3 5×11 28 5×11 28 5×11 40
4.7 5×11 25 5×11 38 5×11 40 5×11 50
10 5×11 28 5×11 40 5×11 45 5×11 50 5×11 60 6.3×11 70
22 5×11 38 5×11 50 5×11 60 5×11 75 5×11 90 5×11 105 8×11.5 120
33 5×11 50 5×11 58 5×11 60 5×11 80 5×11 90 5×11 110 6.3×11 130 8×12.5 145
47 5×11 60 5×11 70 5×11 85 5×11 90 5×11 125 6.3×11 135 6.3×11 160 10×12.5 180
100 5×11 120 5×11 125 5×11 165 6.3×11 180 6.3×11 200 8×11.5 250 8×12.5 280 10×20 350
220 5×11 210 5×11 210 6.3×11 260 8×11.5 320 8×11.5 320 10×12.5 410 10×16 450 12.5×25 550
330 6.3×11 260 6.3×11 295 8×11.5 360 8×11.5 380 10×12.5 440 10×16 580 10×20 600 16×25 750
470 6.3×11 330 6.3×11 330 8×11.5 380 10×12.5 540 10×16 585 10×20 750 12.5×20 800 16×30 950
1000 8×11.5 420 10×12.5 620 10×16 740 10×20 940 12.5×20 1000 12.5×25 1150 16×25 1250
2200 10×16 890 10×20 1000 12.5×20 1150 12.5×25 1350 16×25 1500 16×31.5 1700
3300 10×20 1080 12.5×20 1300 12.5×25 1500 16×25 1600 16×35.5 1750 18×35.5 1850
4700 12.5×20 1400 12.5×25 1550 16×25 1750 16×31.5 1900 18×35.5 2000
6800 12.5×25 1600 16×25 1800 16×31.5 1900 18×35.5 2000
10000 16×25 1750 16×31.5 1900 18×35.5 2000
15000 16×35.5 1900 18×35.5 2000
mArms(120Hz, 85℃)
■ Part number
6 ME 15000 HC
Series code
Rated capacitance
Type code
Rated voltage
78
ME-LS Series
105℃ Long Life
Capacitors
Lead Type
Radial
● 105℃ 3,000hours
Long Life
● Solvent proof (φ4 to 6.3 : within 3 minutes, φ8 : within 5 minutes) ME-LS ME-SZ
（P.75）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
（max.）120Hz/20℃ 0.30 0.28 0.24 0.18 0.16 0.14 ME-SWG
Leakage current
（LC） μA/after 2minutes (max.) The greater value of either 0.01CV or 3 ME-HC
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 5 4 3 2 2 2 ME-LS
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 10 8 6 4 3 3 ME-CZ
105℃, 3,000hours △C/C Within ±30% of the initial value ME-CA
Endurance tanδ Less than 300% of the specified value ME-CX
(With the rated
ripple current) LC Less than the specified value ME-AX
ME-WX
ME-WA
■ Dimensions (Unit : mm) ME-WL
F±0.5
sleeve φD 4 5 6.3 8 ME-WG

φd±0.05
F 1.5 2.0 2.5 3.5 ME-FX
φD±0.5
φd 0.45 0.45 0.45 0.60 ME-PX
ME-HPC･HPD
15min. 5min. ME-FC･FD

L＋αmax. 20min. ME-FH
α : L≤7.5 α=1.0, L=11.5 α=1.5 ME-SWN

A pressure relief vent is provided for φ8×11.5 ME-HWN

V
μF 6.3 10 16 25 35 50
1.0 4×7 17.0 23
2.2 4×7 13.0 26
3.3 4×7 11.0 29
4.7 4×7 6.6 37 5×7 9.0 37
10 4×7 4.2 46 4×7 4.2 46 5×7 2.3 74 6.3×7 2.5 84
22 4×7 4.2 46 5×7 2.3 74 5×7 2.3 74 6.3×7 1.2 120 6.3×7.5 1.6 112
33 5×7 2.3 74 6.3×7 1.2 120 6.3×7.5 0.75 163
47 5×7 2.3 74 6.3×7 1.2 120 6.3×7.5 0.75 163 6.3×7.5 0.75 163
100 6.3×7 1.2 120 6.3×7.5 0.75 163
150 6.3×7.5 0.75 163
220 6.3×7.5 0.75 163 8×11.5 0.40 298 8×11.5 0.40 298
330 8×11.5 0.40 298
470 8×11.5 0.40 298
1000 8×11.5 0.40 298
ripple current frequency coefficients. mArms(100kHz, 105℃)
Impedance(Ω)
■ Part number 6 ME 1000 LS

Series code
Rated capacitance
Type code
Rated voltage
79
ME-CZ Series
Wide Temperature
Small Standard
Lead Type
Radial
Capacitors
ME-CA
（P.82）
● 105℃ 1,000 to 3,000hours Low Impedance
Long Life
● Solvent proof (within 5 minutes) ME-FX ME-CZ
（P.94） 105℃
ME-HC
（P.78）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63 100

ME-SWG
0.28 0.24 0.20 0.16 0.14 0.12 0.10 0.10
ME-HC Dissipation Factor（tan δ） tanδ
（max.）120Hz/20℃
ME-LS
Leakage current
ME-CZ
ME-CA Impedance ratio at Based on the value at −40℃ Z/Z20℃ 4 4 3 3 2 2 2 2

ME-CX
ME-AX Test φ5 to φ8 : 1,000hours, φ10 : 2,000hours, φ12.5 to φ18 : 3,000hours

105℃
ME-WX
Endurance
ME-WA (With the rated tanδ Less than 200% of the specified value
ME-WL
ripple current)
ME-WG
ME-FX
ME-PX
ME-HPC･HPD
φD 5 6.3 8 10 12.5 16 18
F±0.5
ME-FC･FD sleeve
φd±0.05 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
ME-FH
φd
φD±0.5
0.5 0.5 0.6 0.6 0.6 0.8 0.8

ME-SWN
ME-HWN
15min. 5min.
L＋αmax. 20min.
α : L<20 α=1.5, L≥20 α=2.0

A pressure relief vent is provided for φD=6.3 or bigger

V 6.3 10
Case size Items Capacitance Impedance（Ωmax.） Rated ripple current（mArms） Capacitance Impedance（Ωmax.） Rated ripple current（mArms）
φD×L（mm）（μF）（20℃/100kHz）（105℃/100kHz）（μF）（20℃/100kHz）（105℃/100kHz）
5×11 220 1.4 160 100 1.4 150
6.3×11 330 0.58 240 220 0.58 240
6.3×11 470 0.55 250 330 0.55 250
8×11.5 1000 0.26 450 470 0.39 370
10×12.5 1000 0.16 560
10×16 2200 0.12 760
10×20 3300 0.10 900 2200 0.10 900
12.5×20 4700 0.072 1100 3300 0.074 1100
12.5×25 6800 0.054 1420 4700 0.054 1420
16×25 10000 0.043 1700 6800 0.043 1700
16×31.5 10000 0.035 1950
16×35.5 15000 0.032 2100
18×35.5 15000 0.028 2400
■ Part number
16 ME 100 CZ
Series code
Rated capacitance
Type code
Rated voltage
80

V 16 25
Capacitors
Lead Type
Radial
5×11 100 1.4 150 47 1.4 150
6.3×11 220 0.55 240 100 0.60 240
8×11.5 330 0.35 370 220 0.39 370
8×11.5 470 0.28 450 330 0.34 400
10×12.5 470 0.17 560
10×16 1000 0.13 760
10×20 1000 0.10 900
12.5×20 2200 0.075 1100
ME-SWB
12.5×25 3300 0.054 1320 2200 0.062 1320
ME-UZ･SZ
16×25 4700 0.043 1600 3300 0.043 1600
ME-UAX･SAX
16×31.5 6800 0.035 1900 4700 0.035 1900
ME-SWG
18×35.5 10000 0.028 2300 6800 0.028 2200
ME-HC
V ME-LS
35 50
ME-CZ
φD×L（mm）（μF）（20℃/100kHz）（105℃/100kHz）（μF）（20℃/100kHz）（105℃/100kHz） ME-CA
5×11 2.2 5.5 40 ME-CX
5×11 3.3 4.0 50 ME-AX
5×11 4.7 2.8 80 ME-WX
5×11 10 2.3 90 ME-WA
5×11 33 2.1 120 22 2.2 110 ME-WL
5×11 47 2.1 140 33 2.1 120 ME-WG
6.3×11 100 1.1 180 47 1.1 180 ME-FX
8×11.5 220 0.46 360 100 0.55 310 ME-PX
10×12.5 330 0.26 500 220 0.30 500 ME-HPC･HPD
10×16 470 0.18 650 330 0.20 650 ME-FC･FD
10×20 470 0.13 800 ME-FH
12.5×20 1000 0.11 900 ME-SWN
12.5×25 1000 0.10 1100 ME-HWN
16×25 2200 0.056 1400
16×31.5 2200 0.055 1650
16×35.5 3300 0.038 1800
18×35.5 4700 ★ 0.035 2000 3300 0.035 2000
★ Available 40V（40ME4700CZ）
V 63 100
5×11 2.2 8.3 42 2.2 11 42
5×11 3.3 6.0 58 3.3 8.0 58
5×11 4.7 4.2 64 4.7 5.6 64
5×11 10 2.8 90
5×11 22 2.4 140
6.3×11 33 1.4 200 10 1.7 108
6.3×11 47 1.3 240
8×11.5 22 0.83 235
8×12.5 100 0.60 300 33 0.60 300
10×12.5 47 0.39 330
10×16 220 0.22 520
10×20 330 0.17 765 100 0.24 450
12.5×20 470 0.14 960
12.5×25 220 0.15 700
16×25 1000 0.065 1100 330 0.090 950
16×30 470 0.085 1100
81
ME-CA Series
Low Impedance
Small
Lead Type
Radial
Capacitors
ME-CX（P.84）
● Solvent proof (within 5 minutes) ME-CA
Low Impedance
ME-CZ
（P.80）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
ME-SWB Surge voltage (V) Room temperature 8.0 13 20 32 44 63

ME-SWG
0.28 0.24 0.20 0.16 0.14 0.12
（max.）120Hz/20℃
ME-LS
Leakage current
ME-CZ
ME-CA Impedance ratio at Based on the value at −40℃ Z/Z20℃ 3 3 2 2 2 2

ME-CX
ME-AX Test φ5 to φ8 : 1,000hours, φ10 : 2,000hours, φ12.5 to φ16 : 3,000hours

105℃
ME-WX
Endurance
ME-WL
ripple current)
ME-WG
ME-FX
ME-PX
ME-HPC･HPD
ME-FC･FD
F±0.5
sleeve φD 5 6.3 8 10 12.5 16

ME-FH φd±0.05
ME-SWN
F 2.0 2.5 3.5 5.0 5.0 7.5
φD±0.5
ME-HWN
φd 0.5 0.5 0.6 0.6 0.6 0.8
15min. 5min.
L＋αmax. 20min.
α : L<20 α=1.5, L≥20 α=2.0


V 6.3 10
Items Capacitance Impedance（Ωmax.） Rated ripple current（mArms） Capacitance Impedance（Ωmax.） Rated ripple current（mArms）
Case size
φD×L（mm）（μF）（20℃/100kHz）（105℃/10k to 200kHz）（μF）（20℃/100kHz）（105℃/10k to 200kHz）
5×11 220 0.50 180
6.3×11 330 0.30 280 220 0.30 280
6.3×11 470 0.24 280 330 0.24 280
8×11.5 1000 0.15 560 470 0.16 410
10×12.5 1000 0.086 710
10×16 2200 0.066 950
10×20 3300 0.047 1150 2200 0.047 1150
12.5×20 4700 0.042 1460 3300 0.042 1460
12.5×25 6800 0.031 1780 4700 0.031 1780
16×25 10000 0.026 2000 6800 0.026 2000

16×31.5 10000 0.022 2200
16×35.5 15000 0.022 2200
82
Capacitors
Lead Type
Radial
V 16 25
Case size
5×11 100 0.50 180
6.3×11 220 0.24 280 100 0.30 280
8×11.5 330 0.16 410 220 0.16 410
8×11.5 470 0.15 560 330 0.15 560
10×12.5 470 0.086 710

ME-SWB
10×16 1000 0.066 950
ME-UZ･SZ
10×20 1000 0.047 1150 ME-UAX･SAX
12.5×20 2200 0.042 1460 ME-SWG
ME-HC
12.5×25 3300 0.035 1780 2200 0.035 1780
ME-LS
16×25 4700 0.026 2000 3300 0.026 2000
ME-CZ
16×31.5 6800 0.022 2200 4700 0.022 2200 ME-CA
ME-CX
ME-AX
ME-WX
ME-WA
ME-WL
V 35 50 ME-WG
Items Capacitance Impedance（Ωmax.） Rated ripple current（mArms） Capacitance Impedance（Ωmax.） Rated ripple current（mArms） ME-FX
Case size
φD×L（mm）（μF）（20℃/100kHz）（105℃/10k to 200kHz）（μF）（20℃/100kHz）（105℃/10k to 200kHz） ME-PX
5×11 2.2 3.0 45 ME-HPC･HPD
ME-FC･FD
5×11 3.3 2.7 55
ME-FH
5×11 4.7 2.0 90
ME-SWN
5×11 10 1.7 110 ME-HWN
5×11 33 0.72 180 22 1.2 120
5×11 47 0.50 180 33 0.95 130
6.3×11 100 0.24 280 47 0.56 190
8×11.5 220 0.15 560 100 0.30 320
10×12.5 330 0.086 710 220 0.16 520
10×16 470 0.066 950 330 0.12 670
10×20 470 0.088 820
12.5×20 1000 0.042 1460
12.5×25 1000 0.053 1200
16×25 2200 0.026 2000
16×31.5 2200 0.029 1750
16×35.5 3300 0.022 2200

■ Part number
16 ME 2200 CA
Series code
Rated capacitance
Type code
Rated voltage
83
ME-CX Series
Low Impedance
Small, Long Life
Lead Type
Radial
Capacitors
● 105℃ 2,000 to 7,000hours

Long Life
● Solvent proof (within 5 minutes) ME-AX ME-CX
（P.86） Low Impedance
ME-CA
（P.82）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35
Surge voltage (V) Room temperature 8.0 13 20 32 44
ME-SWB Category temperature range (℃) − −55 to ＋105
ME-UZ･SZ Capacitance tolerance (%) 120Hz/20℃ M : ±20
ME-UAX･SAX 0.22 0.19 0.16 0.14 0.12
（max.）120Hz/20℃
ME-SWG Exceeding 1,000μF, ＋0.02 every 1,000μF
Leakage current
ME-HC
ME-LS Impedance ratio at Based on the value at −40℃ Z/Z20℃ 3 2 2 2 2

ME-CZ
Test φ5 to φ6.3 : 2,000hours, φ8 : 3,000hours, φ10 : 4,000hours, φ12.5 : 5,000hours, φ16 to φ18 : 7,000hours
ME-CA
105℃
ME-CX Endurance
ME-AX ripple current) LC Less than the specified value
ME-WX
ME-WA ■ Dimensions (Unit : mm)

ME-WL
F±0.5
sleeve φD 5 6.3 8 10 12.5 16 18

ME-WG
φd±0.05
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD±0.5
ME-FX
φd 0.5 0.5 0.6 0.6 0.6★ 0.8 0.8
ME-PX
★φ12.5×30:φd＝0.8
ME-HPC･HPD 15min. 5min.
ME-FC･FD L＋αmax. 20min.
ME-FH
α : L<20 α=1.5, L≥20 α=2.0
ME-SWN A pressure relief vent is provided for φD=6.3 or bigger
ME-HWN

V 6.3 10
5×11 180 0.34 205 150 0.34 205
6.3×11 330 0.17 330 270 0.17 330
6.3×11 390 0.17 330 330 0.17 330
8×11.5 680 0.11 580 470 0.11 580
8×11.5 560 0.11 580
8×15 1000 0.080 750 680 0.080 750
8×20 ★1 1200 0.060 1000 ★1 1000 0.060 1000
8×20 ★1 1500 0.060 1000
10×12.5 1200 0.063 900 820 0.063 900
10×16 1500 0.049 1200 1000 0.049 1200
10×16 1200 0.049 1200
10×20 2200 0.036 1450 1500 0.036 1450
10×22 2700 0.036 1500 1800 0.036 1500
12.5×20 3900 0.035 1660 2700 0.035 1660
12.5×25 4700 0.027 2000 3900 0.027 2000
12.5×25 5600 0.027 2000
12.5×30 ★1 6800 0.024 2450 ★1 4700 0.024 2450
16×21 ★2 5600 0.032 2000 ★2 3900 0.032 2000
16×25 6800 0.022 2560 4700 0.022 2560
16×25 8200 0.022 2560 5600 0.022 2560
16×31.5 10000 0.017 3010 6800 0.017 3010
16×31.5 8200 0.017 3010
16×35.5 12000 0.016 3150 10000 0.016 3150
18×21 ★2 6800 0.030 2490 ★2 5600 0.030 2490
18×25 ★2 10000 0.022 2740 ★2 6800 0.022 2740
18×30.5 ★2 12000 0.017 3330 ★2 10000 0.017 3330
18×35.5 15000 0.016 3680 12000 0.016 3680
★1 CXL ★2 CXS
84

V 16 25
Capacitors
Lead Type
Radial
5×11 100 0.34 205 68 0.34 205
6.3×11 180 0.17 330 120 0.17 330
6.3×11 220 0.17 330 150 0.17 330
8×11.5 330 0.11 580 220 0.11 580
8×15 470 0.080 750 330 0.080 750
8×20 680 0.060 1000 470 0.060 1000
10×12.5 560 0.063 900 390 0.063 900
10×12.5 ★2 470 0.063 900
ME-SWB
10×16 820 0.049 1200 560 0.049 1200
ME-UZ･SZ
10×16 ★2 680 0.049 1200
ME-UAX･SAX
10×20 1000 0.036 1450 680 0.036 1450
ME-SWG
10×20 820 0.036 1450
ME-HC
10×20 ★2 1000 0.036 1450
ME-LS
10×22 1200 0.036 1500 1000 0.036 1500
12.5×20 1500 0.035 1660 1200 0.035 1660 ME-CZ
12.5×20 1800 0.035 1660 1500 0.035 1660 ME-CA
12.5×25 2200 0.027 2000 1800 0.027 2000 ME-CX
12.5×25 2700 0.027 2000 2200 0.027 2000 ME-AX

12.5×30 ★1 3300 0.024 2450 ★1 2200 0.024 2450 ME-WX
16×21 ★2 2700 0.032 2000 ★2 1800 0.032 2000 ME-WA
16×25 3300 0.022 2560 2700 0.022 2560 ME-WL
16×25 3900 0.022 2560 ME-WG
16×31.5 4700 0.017 3010 3300 0.017 3010 ME-FX
16×31.5 5600 0.017 3010
ME-PX
16×35.5 6800 0.016 3150 3900 0.016 3150
ME-HPC･HPD
18×21 ★2 3300 0.030 2490 ★2 2200 0.030 2490
ME-FC･FD
18×25 ★2 4700 0.022 2740 ★2 3300 0.022 2740
ME-FH
18×30.5 ★2 3900 0.017 3330
ME-SWN
18×35.5 4700 0.016 3680
ME-HWN
18×35.5 8200 0.016 3680 5600 0.016 3680
V 35
Case size Items Capacitance Impedance（Ωmax.） Rated ripple current（mArms）
φD×L（mm）（μF）（20℃/100kHz）（105℃/10k to 200kHz）
5×11 47 0.34 205
6.3×11 100 0.17 330
8×11.5 150 0.11 580
8×15 220 0.080 750
8×20 ★1 330 0.060 1000
10×12.5 270 0.063 900
10×12.5 ★2 330 0.063 900
10×16 330 0.049 1200
10×16 390 0.049 1200 ■ Part number
10×16 ★2 470 0.049 1200
CX
10×20 470 0.036 1450 6 ME 1000 CX
10×20 560 0.036 1450
Series code
10×20 ★2 680 0.036 1450 Rated capacitance
10×22 680 0.036 1500 Type code
Rated voltage
12.5×20 820 0.035 1660
12.5×20 1000 0.035 1660
CXL
12.5×25 1200 0.027 2000
10 ME 1000 CXL
12.5×25 1500 0.027 2000
Series code
12.5×30 ★1 1500 0.024 2450
Rated capacitance
16×21 ★2 1200 0.032 2000 Type code
16×25 1800 0.022 2560 Rated voltage
16×31.5 2700 0.017 3010

16×35.5 3300 0.016 3150
CXS
10 ME 3900 CXS
18×21 ★2 1500 0.030 2490
Series code
18×25 2200 0.022 2740
Rated capacitance
18×30.5 ★2 3300 0.017 3330 Type code
★1 CXL
18×35.5 3900 0.016 3680 ★2 CXS
Rated voltage
85
ME-AX Series
Low Impedance
Long Life
Lead Type
Radial
Capacitors
ME-WX
（P.88）
Long Life
● Solvent proof (within 5 minutes) ME-AX ME-CX
（P.84）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63 100

ME-UZ･SZ Category temperature range (℃) − −55 to ＋105 −40 to ＋105
ME-SWG
0.22 0.19 016 0.14 0.12 0.10 0.10 0.10
（max.）120Hz/20℃
ME-LS
Leakage current
ME-CZ
ME-CA Impedance ratio at Based on the value at −40℃ Z/Z20℃ 3 2 2 2 2 2 2 2

Iow temperature 120Hz, ＋20℃ −55℃ Z/Z20℃ 4 4 3 3 3 2 2 −
ME-CX
ME-AX φ5 : 2,500hours, φ6.3 : 3,000hours, φ8×11.5, φ8×12.5 : 3,500hours,

Test
ME-WX 105℃ φ8×15, φ8×20 : 4,500hours, φ10 : 5,000hours, φ12.5 : 7,000hours, φ16 to φ18 : 10,000hours
ME-WA rated voltage applied
Endurance △C/C Within ±20% of the initial value
(With the rated
ME-WL
ripple current) tanδ Less than 200% of the specified value
ME-WG
ME-FX
ME-PX
ME-HPC･HPD
F±0.5
sleeve φD 5 6.3 8 10 12.5 16 18

ME-FC･FD φd±0.05
ME-FH F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD±0.5
ME-SWN φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
ME-HWN
15min. 5min.
L＋αmax. 20min.
α : L<20 α=1.5, L≥20 α=2.0


V 6.3 10
5×11 150 0.42 190 100 0.42 190
6.3×11 270 0.22 300 220 0.22 300
8×11.5 470 0.11 560 330 0.11 560
8×12.5 560 0.11 570 390 0.11 570
8×15 680 0.085 730 470 0.085 730
8×20 1000 0.069 800 ★1 680 0.069 800
10×12.5 820 0.085 800 680 0.085 800
10×16 1200 0.062 1050 820 0.062 1050
10×20 1500 0.044 1250 1200 0.044 1250
10×22 1800 0.039 1450 1500 0.039 1450
12.5×20 2700 0.038 1600 2200 0.038 1600
12.5×25 3900 0.029 1800 2700 0.029 1800
16×25 5600 0.022 2100 3900 0.022 2100
16×31.5 8200 0.018 2350 5600 0.018 2350
16×35 10000 0.018 2550 6800 0.018 2550
18×35.5 12000 0.018 2800 8200 0.018 2800
★1 AXL ★2 AXS
■ Part number AX AXL AXS

10 ME 470 AX 16 ME 470 AXL 25 ME 470 AXS
86

V 16 25
Capacitors
Lead Type
Radial
5×11 68 0.42 190 47 0.42 190
6.3×11 150 0.22 300 100 0.22 300
8×11.5 220 0.11 560 150 0.11 560
8×12.5 270 0.11 570 180 0.11 570
8×15 330 0.085 730 220 0.085 730
8×20 ★1 470 0.069 800 330 0.069 800
10×12.5 470 0.085 800 270 0.085 800
10×16 560 0.062 1050 390 0.062 1050
ME-SWB
10×16 680 0.062 1050 ★2 470 0.068 1050
ME-UZ･SZ
10×20 820 0.044 1250 560 0.044 1250
ME-UAX･SAX
10×22 1000 0.039 1450 680 0.039 1450
ME-SWG
12.5×20 1200 0.038 1600 1000 0.038 1600
ME-HC
12.5×25 1800 0.029 1800 1200 0.029 1800
ME-LS
16×25 2700 0.022 2100 1800 0.022 2100
16×31.5 3900 2700 ME-CZ
0.018 2350 0.018 2350
16×35 4700 0.018 2550 3300 0.018 2550 ME-CA
18×35.5 5600 0.018 2800 3900 0.018 2800 ME-CX
ME-AX
V 35 50 ME-WX
Case size Items Capacitance Impedance（Ωmax.） Rated ripple current（mArms） Capacitance Impedance（Ωmax.） Rated ripple current（mArms） ME-WA
φD×L（mm）（μF）（20℃/100kHz）（105℃/10k to 200kHz）（μF）（20℃/100kHz）（105℃/10k to 200kHz） ME-WL
5×11 4.7 1.2 115 4.7 2.0 90
ME-WG
5×11 10 0.90 140 10 1.7 110
ME-FX
5×11 22 0.42 190 15 1.2 130
ME-PX
5×11 33 0.42 190 22 0.70 160
ME-HPC･HPD
6.3×11 47 0.22 300 33 0.43 220
ME-FC･FD
6.3×11 68 0.22 300 47 0.43 220
ME-FH
8×11.5 100 0.11 560 68 0.26 360
8×12.5 120 0.11 570 82 0.24 400 ME-SWN
8×15 150 0.085 730 100 0.18 500 ME-HWN
8×20 ★1 220 0.069 800 150 0.16 650

10×12.5 220 0.085 800 120 0.16 550
10×16 270 0.062 1050 180 0.12 760
10×20 330 0.044 1250 270 0.088 950
10×22 470 0.039 1450 330 0.072 1000
12.5×20 680 0.038 1600 470 0.059 1200
12.5×25 1000 0.029 1800 560 0.045 1400
16×25 1500 0.022 2100 1000 0.039 1750
16×31.5 2200 0.018 2350 1200 0.025 2100
16×35 ★1 2200 0.018 2550 1500 0.025 2300
18×35.5 2700 0.018 2800 1800 0.024 2400
V 63 100
5×11 18 1.6 140 5.6 2.7 120
6.3×11 33 0.90 200 12 1.4 170
8×11.5 68 0.52 275 22 0.81 230
8×12.5 ★1 68 0.47 300 ★1 22 0.79 250
8×15 82 0.34 360 27 0.64 295
8×20 ★1 120 0.21 510 ★1 39 0.36 400
10×12.5 120 0.26 420 39 0.39 360
10×16 150 0.20 525 47 0.35 420
10×20 220 0.15 765 68 0.24 630
10×22 270 0.12 840 82 0.21 700
12.5×20 330 0.10 960 100 0.15 800
12.5×25 470 0.064 1200 150 0.11 920
16×25 680 0.052 1500 220 0.071 1100
16×31.5 1000 0.042 1750 330 0.049 1490
16×35 1200 0.036 1920 390 0.043 1630
18×35.5 1500 0.033 2000 470 0.038 1700
Please refer to page 14 for ripple current frequency coefficients. ★1 AXL ★2 AXS
87
ME-WX Series
Low Impedance
High Ripple Current
Lead Type
Radial
Capacitors
ME-WG
（P.93）
● 105℃ 2,000 to 5,000hours Low ESR
Long Life
● Non solvent proof ME-WA ME-WX
（P.90） Low Impedance
ME-AX
（P.86）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
ME-SWB Surge voltage (V) Room temperature 8.0 13 20 32 44 63

ME-SWG
0.22 0.19 0.16 0.14 0.12 0.10
（max.）120Hz/20℃
ME-LS
Leakage current
ME-CZ
ME-CA Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2 2 2 2 2

ME-CX
ME-AX Test φ5 to φ6.3 : 2,000hours, φ8 : 3,000hours, φ10 : 4,000hours, φ12.5 to φ16 : 5,000hours
105℃
ME-WX
Endurance
ME-WL
ripple current)
ME-WG
ME-FX
ME-PX
ME-HPC･HPD
ME-FC･FD
F±0.5
sleeve φD 5 6.3 8 10 12.5 16

ME-FH φd±0.05
ME-SWN
F 2.0 2.5 3.5 5.0 5.0 7.5
φD±0.5
ME-HWN
φd 0.5 0.5 0.6 0.6 0.6★ 0.8
★φ12.5×30:φd＝0.8
15min. 5min.
L＋αmax. 20min.
α : L<20 α=1.5, L≥20 α=2.0


V 6.3 10
Case size
5×11 150 0.30 250 100 0.30 250
6.3×11 330 0.13 405 220 0.13 405
8×11.5 560 0.072 760 470 0.072 760
8×15 820 0.056 995 ★1 680 0.056 995
8×20 ★1 1200 0.041 1250 ★1 1000 0.041 1250
10×12.5 1000 0.053 1030 680 0.053 1030
10×16 1200 0.038 1430 1000 0.038 1430
10×20 1500 0.023 1820 1200 0.023 1820
10×20 2200 0.023 1820 1500 0.023 1820
10×23 ★3 2200 0.022 2150 ★3 1500 0.022 2150
12.5×20 3300 0.021 2360 2200 0.021 2360
12.5×25 3900 0.018 2770 3300 0.018 2770
12.5×30 4700 0.016 3290 3900 0.016 3290
16×21 5600 0.018 3140 ★2 3900 0.018 3140
16×25 6800 0.016 3460 5600 0.016 3460

★1 WXL ★2 WXS ★3 WXV
88
Capacitors
Lead Type
Radial
V 16 25
Case size
5×11 56 0.30 250 47 0.30 250
6.3×11 120 0.13 405 100 0.13 405
8×11.5 330 0.072 760 220 0.072 760
8×15 ★1 470 0.056 995 330 0.056 995
8×20 ★1 680 0.041 1250 ★1 470 0.041 1250

ME-SWB
10×12.5 470 0.053 1030 ★2 330 0.053 1030
ME-UZ･SZ
10×16 680 0.038 1430 470 0.038 1430 ME-UAX･SAX
10×20 1000 0.023 1820 680 0.023 1820 ME-SWG
ME-HC
10×20 1200 0.023 1820 820 0.023 1820
ME-LS
10×23 ★3 1200 0.022 2150 ★3 820 0.022 2150
ME-CZ
12.5×20 1500 0.021 2360 1000 0.021 2360 ME-CA
12.5×25 2200 0.018 2770 1500 0.018 2770 ME-CX
ME-AX
12.5×30 2700 0.016 3290 1800 0.016 3290
ME-WX
16×21 ★2 2700 0.018 3140 ★2 1800 0.018 3140
ME-WA
16×25 3900 0.016 3460 2700 0.016 3460 ME-WL
ME-WG
ME-FX
ME-PX
V 35 50
ME-HPC･HPD
Case size ME-FC･FD
ME-FH
5×11 33 0.30 250 22 0.34 238
ME-SWN
6.3×11 56 0.13 405 47 0.14 385 ME-HWN
8×12.5 ★3 150 0.072 760 100 0.074 724
8×15 220 0.056 995 120 0.061 950
8×20 ★1 270 0.041 1250 180 0.046 1190
10×12.5 ★2 220 0.053 1030 150 0.061 979
10×16 330 0.038 1430 220 0.042 1370
10×20 470 0.023 1820 270 0.030 1580
10×23 ★3 560 0.022 2150 330 0.028 1870
12.5×20 680 0.021 2360 470 0.027 2050
12.5×25 1000 0.018 2770 560 0.023 2410
12.5×30 1200 0.016 3290 680 0.021 2860
16×21 ★2 1200 0.018 3140 820 0.023 2730
16×25 1800 0.016 3460 1000 0.021 3010

Please refer to page 14 for ripple current frequency coefficients. ★1 WXL ★2 WXS ★3 WXV
■ Part number WX WXL

6 ME 1000 WX 10 ME 1000 WXL
Type code Type code
WXS WXV
25 ME 330 WXS 35 ME 560 WXV
Type code Type code
89
ME-WA Series
105℃, Small, Long Life
Low Impedance, High Ripple Current
Lead Type
Radial
Capacitors
● 105℃ 8,000 to 10,000hours

Long Life
● Non solvent proof ME-WA ME-WX（P.88）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63
ME-SWB Surge voltage (V) Room temperature 8.0 13 20 32 44 63 79

ME-SWG
0.22 0.19 0.16 0.14 0.12 0.10 0.10
（max.）120Hz/20℃
ME-LS
Leakage current
ME-CZ
ME-CA Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2 2 2 2 2 2

ME-CX
ME-AX Test φ8 : 8,000hours, φ10 to φ16 : 10,000hours

105℃
ME-WX
rated voltage applied △C/C Within ±25% of the initial value(6.3V, 10V : ±30%)
Endurance
ME-WL
ripple current)
ME-WG
ME-FX
ME-PX
ME-HPC･HPD
ME-FC･FD
φD 8 10 12.5 16
F±0.5
ME-FH
sleeve
φd±0.05
ME-SWN
F 3.5 5.0 5.0 7.5
φD±0.5
ME-HWN
φd 0.6 0.6 0.6★ 0.8
★φ12.5×30:φd＝0.8
15min.
5min.
L＋αmax. 20min.
α : L<20 α=1.5, L≥20 α=2.0 (Only φ8×11.5 α=2.0)

V 6.3 10
Case size
8×11.5 820 0.059 945 680 0.059 945
8×15 ★1 1200 0.046 1250 ★1 1000 0.046 1250
8×20 1500 0.031 1500 ★1 1500 0.031 1500
10×12.5 1200 0.043 1330 1000 0.043 1330
10×16 1800 0.030 1760 1500 0.030 1760
10×20 2200 0.021 1960 1800 0.021 1960
10×22 2700 0.020 2250 2200 0.020 2250
12.5×20 3900 0.019 2480 3300 0.019 2480
12.5×25 4700 0.016 2900 3900 0.016 2900
12.5×30 5600 0.014 3450 ★1 4700 0.014 3450
16×21 6800 0.018 3250 4700 0.018 3250
16×25 8200 0.014 3630 6800 0.014 3630

★1 WAL
90
Capacitors
Lead Type
Radial
V 16 25
Case size
8×11.5 470 0.059 945 330 0.059 945
8×15 ★1 680 0.046 1250 390 0.046 1250
8×20 ★1 1000 0.031 1500 560 0.031 1500
10×12.5 680 0.043 1330 470 0.043 1330
10×16 1000 0.030 1760 680 0.030 1760

ME-SWB
10×20 1500 0.021 1960 820 0.021 1960
ME-UZ･SZ
10×22 1800 0.020 2250 1000 0.020 2250 ME-UAX･SAX
12.5×20 2200 0.019 2480 1500 0.019 2480 ME-SWG
ME-HC
12.5×25 2700 0.016 2900 1800 0.016 2900
ME-LS
12.5×30 ★1 3300 0.014 3450 ★1 2200 0.014 3450
ME-CZ
16×21 3300 0.018 3250 2200 0.018 3250 ME-CA
16×25 4700 0.014 3630 3300 0.014 3630 ME-CX
ME-AX
ME-WX
ME-WA
V 35 50 ME-WL
Case size ME-WG
ME-FX
8×11.5 220 0.059 945 100 0.074 724 ME-PX
8×15 270 0.046 1250 120 0.061 950 ME-HPC･HPD
ME-FC･FD
8×20 390 0.031 1500 180 0.046 1190
ME-FH
10×12.5 330 0.043 1330 150 0.061 979
ME-SWN
10×16 470 0.030 1760 220 0.042 1370 ME-HWN
10×20 560 0.021 1960 270 0.030 1580
10×22 680 0.020 2250 330 0.028 1870
12.5×20 1000 0.019 2480 470 0.027 2050
12.5×25 1200 0.016 2900 560 0.023 2410
12.5×30 ★1 1500 0.014 3450 680 0.021 2860
16×21 1500 0.018 3250 820 0.023 2730
16×25 2200 0.014 3630 1000 0.021 3010
V 63
Items Capacitance Impedance（Ωmax.） Rated ripple current（mArms）
Case size
（μF）（20℃/100kHz）（105℃/100kHz）
φD×L（mm） ■ Part number
8×11.5 82 0.22 525 WA
8×15 100 0.16 688 10 ME 1000 WA
Series code
8×20 150 0.12 861
Rated capacitance
10×12.5 120 0.15 725 Type code
Rated voltage
10×16 180 0.11 998
10×20 270 0.078 1200 WAL

16 ME 1000 WAL
12.5×20 390 0.060 1570
Series code
12.5×25 470 0.043 1990 Rated capacitance
Type code
12.5×30 ★1 560 0.035 2410 Rated voltage
16×21 560 0.043 2100
16×25 820 0.032 2730

Please refer to page 14 for ripple current frequency coefficients. ★1 WAL
91
ME-WL Series
105℃, Small, Low Impedance
Long Life
Lead Type
Radial
Capacitors
● 105℃ 4,000 to 5,000hours

● Non solvent proof ME-WL
Long Life
ME-WX
（P.88）
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 63 100

（max.）120Hz/20℃ 0.22 0.19 0.16 0.14 0.12 0.10 0.10 0.10
ME-HC Leakage current

ME-LS Impedance ratio at Based on the value at −25℃ Z/Z20℃ 4 3 2 2 2 2 2 2

ME-CZ
ME-CA Test 4,000hours 5,000hours

105℃
ME-CX rated voltage applied △C/C Within ±25% of the initial value
Endurance
ME-AX
ripple current)
ME-WX LC Less than the specified value
ME-WA
ME-WL ■ Dimensions
(Unit : mm)
ME-WG
F±0.5
sleeve
ME-FX
φd±0.05 φD 5 6.3
F 2.0 2.5
φD±0.5
ME-PX
ME-HPC･HPD
φd 0.5 0.5

ME-FH L＋1.5max. 20min.
ME-SWN A pressure relief vent is provided for φD=6.3 or bigger

ME-HWN

V
μF 6.3 10 16 25
47 5×11 0.58 210
56 5×11 0.69 210
100 5×11 0.58 210 5×11 0.69 210 6.3×11 0.26 340
120 6.3×11 0.26 340
150 5×11 0.69 210 5×11 0.69 210
220 6.3×11 0.26 340 6.3×11 0.26 340
330 6.3×11 0.26 340 6.3×11 0.26 340
470 6.3×11 0.26 340
V
μF 35 50 63 100
2.2 5×11 2.50 43
3.3 5×11 2.20 53
4.7 5×11 1.90 88
6.8 5×11 1.40 125
10 5×11 1.50 100
15 5×11 1.06 165 6.3×11 0.57 205
18 5×11 1.06 165
22 5×11 0.84 180 6.3×11 0.42 265
27 5×11 0.84 180
33 5×11 0.69 210 6.3×11 0.42 265
47 5×11 0.69 210 6.3×11 0.40 250
56 6.3×11 0.26 340 6.3×11 0.36 295
100 6.3×11 0.26 340
Impedance(Ω) Rated ripple current
Case size:φDxL(mm)
■ Part number 16 ME 120 WL

Series code
Rated capacitance
Type code
Rated voltage
92
ME-WG Series
Super Low ESR, Small
Capacitors
Lead Type
Radial
● 105℃ 2,000 to 4,000hours
● Non solvent proof ME-WG
Low ESR
ME-WX
（P.88）
■ Specifications
Rated voltage (V) − 6.3 10 16 25
Surge voltage (V) Room temperature 8.0 13 20 32 ME-SWB
0.22 0.19 0.16 0.14 ME-SWG
（max.）120Hz/20℃
Exceeding 1,000μF, ＋0.02 every 1,000μF ME-HC
Leakage current
（LC） μA/after 2minutes (max.) 0.03CV ME-LS
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 2 2 2 2 ME-CZ
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 3 3 3 3 ME-CA
Test φ8×11.5, φ8×16, φ10×12.5, φ10×16 : 2,000hours, φ8×20 : 3,000hours, φ10×20, φ10×23 : 4,000hours ME-CX
105℃
rated voltage applied △C/C Within ±25% of the initial value ME-AX
Endurance
(With the rated tanδ Less than 200% of the specified value ME-WX
ripple current)
LC Less than the specified value ME-WA
ME-WL
■ Dimensions ME-WG
(Unit : mm)
ME-FX
φD 8 10
F±0.5
sleeve ME-PX
φd±0.05 F 3.5 5.0
ME-HPC･HPD
φd
φD±0.5
0.6 0.6
ME-FC･FD
ME-FH
pressure 15min. 5min. ME-SWN
relief vent L＋αmax. 20min. ME-HWN
α : L<20 α=1.5, L≥20 α=2.0(Only φ8×11.5 α=2.0)

V 6.3 10 16 25
Items Case size ESR Ripple current Case size ESR Ripple current Case size ESR Ripple current Case size ESR Ripple current
φDxL （mΩmax.）（mArms） φDxL （mΩmax.）（mArms） φDxL （mΩmax.）（mArms） φDxL （mΩmax.）（mArms）
μF （mm） 20℃/100kHz 105℃/100kHz （mm） 20℃/100kHz 105℃/100kHz （mm） 20℃/100kHz 105℃/100kHz （mm） 20℃/100kHz 105℃/100kHz
220 8×11.5 30 1110
8×11.5 30 1140 8×11.5 32 1080
330
10×12.5 ★3 25 1440
8×11.5 30 1140 8×11.5 36 1140 8×20 ★1 18 1820
470 10×12.5 27 1390
10×16 ★3 20 1920
8×11.5 36 1140 8×16 ★1 28 1490 10×16 22 1830
680
10×12.5 26 1540 10×20 ★3 16 2180
820 8×11.5 36 1140
8×11.5 30 1140 8×16 ★1 28 1490 8×20 ★1 19 1870 10×23 ★1 16 2180
1000
10×12.5 26 1540 10×16 19 2000
1200 8×16 28 1490 8×20 ★1 19 1870
8×20 ★1 19 1870 8×20 ★1 19 1870 10×20 13 2550
8×20 ★2 16 1950 10×16 19 2000
1500
10×12.5 26 1540
10×16 ★3 18 2000
8×20 ★2 16 1950 10×20 13 2550 10×23 12 2800
1800
10×16 19 2000
2200 10×20 13 2550 10×23 12 2800
3300 10×23 12 2800
Please refer to page 14 for ripple current frequency coefficients. ★1 WGL ★2 WGL2 ★3 WGV
■ Part number
WG WGL WGL2 WGV
10 ME 1000 WG 6 ME 1500 WGL 6 ME 1500 WGL2 25 ME 470 WGV
Series code Series code Series code Series code
Rated capacitance Rated capacitance Rated capacitance Rated capacitance
Type code Type code Type code Type code
Rated voltage Rated voltage Rated voltage Rated voltage
93
ME-FX Series
Long Life
Lead Type
Radial
Capacitors
● 105℃ 10,000hours
Long Life
● Solvent proof(within 5 minutes) ME-FX ME-CZ（P.80）
■ Specifications
Rated voltage (V) − 10 16 25 35 50 100
ME-SWB Surge voltage (V) Room temperature 13 20 32 44 63 125

ME-SWG
（max.）120Hz/20℃ 0.45 0.35 0.30 0.22 0.19 0.15
ME-HC
Leakage current
ME-LS
ME-CZ Impedance ratio at Based on the value at

−25℃ Z/Z20℃ 8 6 4 4 3 3
ME-CA
ME-CX 105℃, 10,000hours △C/C Within ±25% of the initial value

(With the rated
ME-WA
ME-WL
ME-WG
ME-FX
F±0.5
sleeve φD 5 6.3 8
ME-PX φd±0.05
ME-HPC･HPD
F 2.0 2.5 3.5
φD±0.5
ME-FC･FD
φd 0.5 0.5 0.6
ME-FH
15min. 5min.
ME-SWN 20min.
L＋1.5max.
ME-HWN

V
μF 10 16 25 35 50 100
2.2 5×11 35
3.3 5×11 70
4.7 5×11 80 5×11 70
10 5×11 90 6.3×11 150
22 5×11 110 8×11.5 230
33 5×11 130 5×11 130 6.3×11 190
47 5×11 130 5×11 130 6.3×11 210 6.3×11 190
100 6.3×11 210 6.3×11 210 8×11.5 330 8×12.5 270
220 6.3×11 210 8×11.5 330 8×11.5 330
330 8×11.5 330 8×11.5 330
470 8×11.5 330
ripple current frequency coefficients. mArms(100kHz, 105℃)
■ Part number 10 ME 220 FX

Series code
Rated capacitance
Type code
Rated voltage
94
ME-PX Series
125℃
Capacitors
Lead Type
Radial
● 125℃ 2,000 to 4,000hours
● Solvent proof(within 5 minutes) ME-PX
125℃
ME-AX
（P.86）
■ Specifications
Rated voltage (V) − 10 16 25 35 50 100
Surge voltage (V) Room temperature 13 20 32 44 63 125 ME-SWB
ME-SWG
0.20 0.16 0.14 0.12 0.10 0.08
（max.）120Hz/20℃ ME-HC
ME-LS
Leakage current
ME-CZ
ME-CA
Iow temperature 120Hz, ＋20℃ −55℃ Z/Z20℃ 4 3 3 3 2 2 ME-CX
Tset φ8 : 2,000hours, φ10 : 3,000hours, φ12.5 to φ18 : 4,000hours ME-AX
125℃
rated voltage applied △C/C Within ±30% of the initial value ME-WX
Endurance
(With the rated tanδ Less than 300% of the specified value ME-WA
ripple current) ME-WL
ME-WG
ME-FX
ME-PX
■ Dimensions ME-HPC･HPD
(Unit : mm) ME-FC･FD

F±0.5
sleeve
φd±0.05 φD 8 10 12.5 16 18 ME-FH
F 3.5 5.0 5.0 7.5 7.5 ME-SWN

φD±0.5
φd 0.6 0.6 0.6 0.8 0.8 ME-HWN
15min.
5min.
L＋2max. 20min.

V
μF 10 16 25 35 50 100
10 8×11.5 0.95 150 8×11.5 1.5 150
22 8×11.5 0.65 210 8×12.5 1.5 190
33 8×12.5 0.45 230 10×12.5 0.75 330
47 8×12.5 0.45 230 8×12.5 0.45 230 10×16 0.57 400
100 8×11.5 0.39 250 8×12.5 0.26 280 10×12.5 0.35 315 10×12.5 0.35 315 12.5×20 0.29 580
220 8×12.5 0.26 280 10×12.5 0.20 350 10×12.5 0.17 380 10×16 0.29 420 10×20 0.20 560 16×25 0.22 670
330 10×12.5 0.20 350 10×12.5 0.17 380 10×16 0.15 490 10×20 0.20 560 12.5×20 0.12 630 16×31.5 0.15 810
470 10×12.5 0.17 380 10×16 0.15 490 10×20 0.12 590 12.5×20 0.12 630 12.5×25 0.10 770 18×31.5 0.11 950
1000 10×20 0.12 590 12.5×20 0.073 770 12.5×25 0.050 1050 16×25 0.058 980 16×31.5 0.045 1200
2200 12.5×25 0.050 1050 16×25 0.044 1150 16×31.5 0.030 1500
3300 16×25 0.044 1150 16×31.5 0.030 1500
4700 16×31.5 0.030 1500
Please refer to page 14 for Impedance(Ω) Rated ripple current
ripple current frequency coefficients. max. at 100kHz, 20℃ mArms(10k to 100kHz, 125℃)
Case size:φDxL(mm)
■ Part number 50 ME 220 PX

Series code
Rated capacitance
Type code
Rated voltage
95
ME-HPC・HPD Standard, High Voltage
Series Low Profile, High Voltage

Lead Type
Radial
Capacitors
ME-FC
（P.97） ME-FD
（P.97）
● Non solvent proof 105℃ 105℃
ME-HPC ME-HPD
■ Specifications
Rated voltage (V) − 160 200 250 350 400 450

（max.）120Hz/20℃ 0.20 0.20 0.20 0.25 0.25 0.25
ME-HC μA/after CV ≤ 1,000 0.03CV ＋15

Leakage current
（LC）
2minutes (max.) CV > 1,000 0.02CV ＋25
ME-LS
ME-CZ Impedance ratio at Based on the value at −25℃ Z/Z20℃ 3 3 3 4 6 12

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 6 6 6 − − −
ME-CA
ME-CX
ME-AX (With the rated
ME-WA
ME-WL ■ Dimensions
(Unit : mm)
ME-WG
F±0.5
sleeve
ME-FX
φd±0.05 φD 5 6.3 8 10 12.5 16 18
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD±0.5
ME-PX
ME-HPC･HPD
φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8

ME-FH L＋αmax. 20min.
ME-SWN α : L<20 α=1.5, L≥20 α=2.0

ME-HWN A pressure relief vent is provided for φD=6.3 or bigger

V
μF 160 200 250 350 400 450
0.47 5×11 10 5×11 11 5×11 12
1.0 5×11 21 5×11 23 5×11 25 6.3×11 29
2.2 6.3×11 31 6.3×11 34 6.3×11 35 8×11.5 40 8×11.5 40
3.3 6.3×11 40 6.3×11 46 8×11.5 48 8×12.5 52 10×12.5 52
4.7 6.3×11 55 8×11.5 57 8×11.5 59 10×12.5 67 10×16 67
8×11.5 8×12.5 10×12.5 10×16 10×20
10 90 92 94 100 100 100
16×21
10×12.5 10×16 10×20 12.5×20 12.5×25 16×25
22 153 160 170 175 180 180
16×21 18×21
10×20 10×20 12.5×20 12.5×25 16×25 16×30
33 195 210 220 225 230 220
16×21 18×21 18×25
12.5×20 12.5×20 12.5×25 16×25 16×30 18×35.5
47 245 250 260 260 270 245
16×21 18×21 18×25
12.5×20 12.5×25 16×25 16×35.5 16×35.5
68 310 325 335 340 345
16×21 18×21 18×25 18×30.5
12.5×25 16×30 18×30.5 18×35.5
82 380 390 400 405 420
16×21 16×21 18×25
12.5×25 16×25 16×30 18×35.5
100 410 430 432 440
16×21 18×21 18×25
16×30 16×35.5 18×35.5
150 550 575 588
18×25 18×30.5
16×35.5 18×35.5
220 745 760
18×30.5
Upper : ME-HPC series(0.47μF to 4.7μF:ME-HPC series) Case size:φDxL(mm) Rated ripple current
Lower : ME-HPD series mArms(120Hz, 85℃)
■ Part number HPC HPD

160 ME 33 HPC 450 ME 10 HPD
Type code Type code
96
ME-FC・FD Series
105℃, High Voltage
105℃ Low Profile, High Voltage
Capacitors
Lead Type
Radial
● 105℃ 1,000 to 2,000hours
● Non solvent proof ME-FC ME-FD
105℃ 105℃
ME-HPC
（P.96） ME-HPD
（P.96）
■ Specifications
Rated voltage (V) − 160 200 250 350 400 450
Surge voltage (V) Room temperature 200 250 300 400 450 500 ME-SWB
Category temperature range (℃) − −40 to ＋105 −25 to ＋105 ME-UZ･SZ
（max.）120Hz/20℃ 0.20 0.20 0.20 0.25 0.25 0.25 ME-SWG
μA/after CV ≤ 1,000 0.03CV ＋15 ME-HC
Leakage current
（LC）
2minutes (max.) CV > 1,000 0.02CV ＋25 ME-LS
Impedance ratio at Based on the value at −25℃ Z/Z20℃ 3 3 3 4 6 6 ME-CZ
Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 6 6 6 8 10 − ME-CA
Test φ5 to φ8 : 1,000hours, φ10 to φ18 : 2,000hours ME-CX
105℃
rated voltage applied △C/C Within ±20% of the initial value ME-AX
Endurance
(With the rated tanδ Less than 200% of the specified value ME-WX
ripple current)
LC Less than the specified value ME-WA
ME-WL
■ Dimensions ME-WG
(Unit : mm)
ME-FX
F±0.5
sleeve
φd±0.05 φD 5 6.3 8 10 12.5 16 18 ME-PX
F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD±0.5
ME-HPC･HPD
φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
ME-FC･FD
15min. 5min. ME-FH

L＋αmax. 20min. ME-SWN
α : L<20 α=1.5, L≥20 α=2.0
A pressure relief vent is provided for φD=6.3 or bigger ME-HWN

V
μF 160 200 250 350 400 450
0.47 5×11 7.0 5×11 8.0 5×11 8.0
1.0 5×11 15 5×11 16 5×11 18 6.3×11 20
2.2 6.3×11 22 6.3×11 24 6.3×11 25 8×11.5 28 8×11.5 28
3.3 6.3×11 28 6.3×11 32 8×11.5 34 8×12.5 36 10×12.5 36
4.7 6.3×11 39 8×11.5 40 8×11.5 41 10×12.5 47 10×16 47
8×11.5 8×12.5 10×12.5 10×20 10×20
10 63 64 66 70 70 70
16×21
10×12.5 10×16 10×20 12.5×25 12.5×25 16×25
22 107 112 119 123 126 125
16×21 16×21 18×21
10×20 10×20 12.5×20 16×25 16×25 16×30
33 137 147 154 158 161 154
18×21 18×21 18×25
12.5×20 12.5×20 12.5×25 16×30 16×30 18×35.5
47 172 175 182 182 189 172
16×21 18×25 18×25
12.5×20 12.5×25 16×25 16×35.5 18×35.5
68 217 228 235 242 249
16×21 18×21 18×30.5
12.5×25 16×30 18×35.5
82 270 277 284 294
16×21 16×21 18×25
12.5×25 16×25 16×35.5
100 287 301 302
16×21 18×21 18×25
16×30 16×35.5 18×35.5
150 385 403 412
18×25 18×30.5
16×35.5 18×35.5
220 522 532
18×30.5
Upper : ME-FC series(0.47μF to 4.7μF:ME-FC series) Case size:φDxL(mm) Rated ripple current
mArms(120Hz, 105℃)
Lower : ME-FD series
■ Part number FC FD
160 ME 33 FC 450 ME 10 FD
Type code Type code
97
ME-FH Series
105℃, Small, Long Life
High Voltage
Lead Type
Radial
Capacitors
● 105℃ 10,000 to 12,000hours

Long Life
● Non solvent proof ME-FH ME-FC・FD
（P.97）
■ Specifications
Rated voltage (V) − 160 200 250 350 400 450
ME-SWG
（max.）120Hz/20℃ 0.20 0.20 0.20 0.25 0.25 0.25
ME-HC
Leakage current
（LC） μA/after 2minutes (max.) 0.02CV ＋25
ME-LS
ME-CZ Impedance ratio at Based on the value at −25℃ Z/Z20℃ 3 3 3 4 6 6

Iow temperature 120Hz, ＋20℃ −40℃ Z/Z20℃ 6 6 6 8 10 −
ME-CA
ME-CX Test φ10 : 10,000hours, φ12.5 to φ18 : 12,000hours

105℃
ME-AX rated voltage applied △C/C Within ±20% of the initial value
Endurance
ME-WX (With the rated tanδ Less than 200% of the specified value
ripple current)
ME-WA LC Less than the specified value
ME-WL
ME-WG
ME-FX
ME-PX
φD 10 12.5 16 18
F±0.5
sleeve F 5.0 5.0 7.5 7.5

ME-HPC･HPD φd±0.05
φd 0.6 0.6 0.8 0.8
φD±0.5
ME-FC･FD
ME-FH
ME-SWN 15min.
5min.
ME-HWN pressure relief vent
L＋αmax. 20min.
α : L<20 α=1.5, L≥20 α=2.0

V
μF 160 200 250 350 400 450
4.7 10×12.5 57
6.8 10×16 88 10×20 58
10 10×12.5 105 10×16 106 10×16 100 10×20 108 12.5×20 145
22 10×16 173 10×20 184 12.5×20 184 12.5×25 195 16×25 218
33 10×16 190 10×20 227 12.5×20 238 12.5×25 224 16×25 249 16×31.5 243
47 10×20 270 12.5×20 270 12.5×25 282 16×25 282 16×31.5 292 18×31.5 304
68 12.5×20 336 12.5×20 325 16×25 364 16×31.5 334 18×31.5 346 18×41 340
82 12.5×20 346 12.5×25 370 16×25 403 18×31.5 360 18×35.5 420
100 12.5×25 410 16×25 436 16×31.5 418 18×41 500
150 16×25 500 16×31.5 470 18×31.5 545
220 16×31.5 570 18×31.5 660
mArms(120Hz, 105℃)
■ Part number
200 ME 33 FH
Series code
Rated capacitance
Type code
Rated voltage
98
ME-SWN Series
Bi-polar
7mm Height
Capacitors
Lead Type
Radial
● 85℃ 1,000hours
● Solvent proof(within 3 minutes)
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50
ME-SWG
（max.）120Hz/20℃ 0.24 0.22 0.20 0.18 0.16 0.16
ME-HC
Leakage current
（LC） μA/after 1minutes (max.) 0.03CV ＋6
ME-LS
500hours×2(alternately) △C/C Within ±25% of the initial value
ME-CZ
(With the rated ME-CA
ripple current) LC Less than the specified value ME-CX
ME-AX
ME-WX

ME-WA
ME-WL
φD 4 5 6.3
ME-WG
F±0.5
sleeve F 1.5 2.0 2.5

φd±0.05 ME-FX
φd 0.45 0.45 0.45
φD±0.5
ME-PX
ME-HPC･HPD
15min. ME-FC･FD
5min.
L＋1max. 20min. ME-FH
ME-SWN
ME-HWN

V
μF 6.3 10 16 25 35 50
1.0 4×7 10
2.2 4×7 10 5×7 15
3.3 4×7 16 5×7 17 5×7 18
4.7 4×7 19 5×7 20 6.3×7 23
10 4×7 17 4×7 25 5×7 28 6.3×7 30 6.3×7 34
22 5×7 31 5×7 35 6.3×7 39 6.3×7 52
33 5×7 39 6.3×7 43 6.3×7 57
47 6.3×7 47 6.3×7 59 6.3×7 68
mArms(120Hz, 85℃)
■ Part number 16 ME 33 SWN

Series code
Rated capacitance
Type code
Rated voltage
99
ME-HWN Series
Bi-polar
Standard
Lead Type
Radial
Capacitors
● 85℃ 2,000hours
● Solvent proof(within 5 minutes)
■ Specifications
Rated voltage (V) − 6.3 10 16 25 35 50 100
ME-SWB Surge voltage (V) Room temperature 8.0 13 20 32 44 63 125

ME-SWG
0.24 0.20 0.18 0.16 0.14 0.13 0.10
（max.）120Hz/20℃
ME-LS
Leakage current
（LC） μA/after 1minute (max.) 0.03CV ＋6
ME-CZ
ME-CA Impedance ratio at Based on the value at −25℃ Z/Z20℃ 4 3 3 2 2 2 2

ME-CX
ME-AX 500hours×4(alternately) △C/C Within ±25% of the initial value

85℃,rated voltage applied
ME-WX Endurance tanδ Less than 200% of the specified value
(With the rated
ME-WA ripple current) LC Less than the specified value
ME-WL
ME-WG
ME-FX
ME-PX
φD 5 6.3 8 10 12.5
F±0.5
ME-HPC･HPD sleeve
φd±0.05 F 2.0 2.5 3.5 5.0 5.0
ME-FC･FD
φD±0.5
ME-FH φd 0.5 0.5 0.6 0.6 0.6
ME-SWN
ME-HWN 15min. 5min.

L＋αmax. 20min.
α : L<20 α=1.5, L≥20 α=2.0


V
μF 6.3 10 16 25 35 50 100
1.0 5×11 10
2.2 5×11 20 5×11 25
3.3 5×11 28 6.3×11 30
4.7 5×11 25 5×11 30 5×11 38 6.3×11 45
10 5×11 28 5×11 40 5×11 45 6.3×11 50 8×12.5 70
22 5×11 38 5×11 50 5×11 60 6.3×11 75 6.3×11 90 10×16 120
33 5×11 50 5×11 58 5×11 60 6.3×11 80 6.3×11 90 8×11.5 110 10×20 170
47 5×11 60 5×11 70 6.3×11 85 6.3×11 90 8×11.5 125 10×12.5 135 12.5×20 200
100 6.3×11 120 6.3×11 125 8×11.5 165 8×12.5 180 10×12.5 200 10×20 250
220 8×11.5 210 8×12.5 225 10×12.5 260 10×16 320 10×20 350 12.5×25 410
330 8×11.5 260 10×12.5 295 10×16 360 10×20 425 12.5×20 440
470 10×12.5 330 10×16 390 10×20 420 12.5×20 540 12.5×25 585
1000 10×20 560 12.5×20 620 12.5×25 740
2200 12.5×25 890
ripple current frequency coefficients. Case size:φDxL(mm) Rated ripple current
mArms(120Hz, 85℃)
■ Part number 50 ME 10 HWN

Series code
Rated capacitance
Type code
Rated voltage
100
network
expanding around the world
SUN Electronic Industries

(Europe)GmbH
Munich, Germany KURODA ELECTRIC

U.S.A. Inc.
San Diego Sales Office
SUN Electronic
Industries Corp.
SUN Electronic
(Nantong)Co.,Ltd.
Izumo Plant
SUNCON Electronics Kanto Sales Office
Masuda
Trading (Shanghai) Co.,Ltd. Plant
Shimonoseki Head Office
Taiwan Office Plant (Osaka)
SUNCON Electronics
(Hong Kong)Co.,Ltd.
Head Office Izumo Plant
Masuda Plant SUN Electronic(Nantong)Co.,Ltd.

■ Head Office
1-1-18, Okayama-higashi, Shijonawate-City, Osaka 575-8585, Japan
Phone:+81-72-876-1423 Fax:+81-72-879-0395
■ Taiwan Office
Room302, 3F., No.160, Sec.2, Nanjing E. Rd., Jhongshan District, Taipei City 104, Taiwan
Phone:+886-2-2516-0602 Fax:+886-2-2517-6045
■ SUNCON Electronics (Hong Kong) Co., Ltd.
Room2311, Paul Y. Centre, 51 Hung To Road, Kwun Tong, Kowloon, Hong Kong
Phone:+852-2707-0502 Fax:+852-2707-9881
■ SUNCON Electronics Trading (Shanghai) Co., Ltd.
Room No.2705,360 changshou Road,Putuo District,Shanghai,China P.C:200060
Phone:+86-21-6259-1750 Fax:+86-21-6259-1791
■ SUN Electronic Industries (Europe) GmbH
Hohenlindener strasse 1, 81677 Munich, Germany
Phone:+49-89-91049188
KURODA ELECTRIC U.S.A. Inc.

■ San Diego Sales Office
2320 Paseo de las Americas, Suite109, San Diego, CA, 92154 USA
Phone:+1-619-661-8288 Fax:+1-619-661-8282
An inquiry, the order to the following.
●Modifying the subjects and specifications in this catalog without any notice. 2019

E All2019 PDF

Uploaded by

Copyright:

Available Formats

E All2019 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

E All2019 PDF

Uploaded by

Copyright:

Available Formats

Capacitors

Aluminum Electrolytic Capacitors with

Aluminum Electrolytic Capacitors · · · · · · · · · · · · · · · · · · · · · · · · · 37

CE-EX HVA Hybrid Conductive Polymer, Low ESR

CE-GS CE-GA Surface mount type, 5.4mm height, low impedance

CE-GX CE-AX Surface mount type, low impedance

CE-FC CE-FD, LD Surface mount type, 4.5mm height

CE-PX CE-PC Surface mount type, 125°

MV(ME)-FA ME-CZ 105°

ME-FZ ME-WA Low impedance, High ripple Long life

■ Hybrid Conductive Polymer Type

H V A 18 105℃ ● ● ● ● −55 to +105 6.3 to 16 10 to 1000 ―― Blue

22 135℃ ● ● ● ● −55 to +135 25 to 63 10 to 330 ―― Blue

H E H Z 33 105℃ High Ripple ● ● ● −55 to +105 16 to 40 27 to 560 ―― Blue

■ Aluminum Electrolytic Type

Classiﬁcation Series Features

49 Long Life ● ● −40 to +105 6.3 to 50 1.0 to 4700 ―― Black

Please refer to http://www.sunelec.co.jp for the information where ★ marking is indicated.

■ Aluminum Electrolytic Type

ME-UW ★ 5mm Height ● ● −40 to +85 4 to 50 10 to 330 Black White

105℃, Low Proﬁle

105℃, Long Life

Please contact us for AEC-Q200 requirements.

■ Hybrid Conductive Polymer Type

P.23 P.22 P.21 P.20 ★

NEW P.31 NEW P.30 P.36 P.35

P.29 P.28 P.27 P.26

P.32 P.19 P.18

■ Aluminum Electrolytic Type

P.64-65 P.49 P.60 P.44

RADIAL LEAD TYPE

P.95 P.86-87 P.88-89 P.93 ME-SWN*

P.82-83 P.76 P.76

P.94 P.80-81 P.79 P.75 P.75

For circuit design

8) Do not use the capacitor in the environments listed below.

Cace Diameter Space

11) Do not place heat-generating devices around the capacitor.

7) Do not deform the capacitor.

18) Do not use a glue and/or a coating material including halogen.

During use in application

1) Do not touch the capacitor.

■ Environmental Products (Compliance of RoHS Directive)

Surface Mount Type Radial Lead Type

Part number 10CE100LX 10CE4700LXT 10ME100AX 63HEH10MT

Sleeve Not used Not used PET Not used

★1 Sn plating lead-wire for Surface Mount Type : CE_T , HV_T

■ Conforming to European REACH Regulation.

■ Intellectual Property Rights

■ Surface Mount Type Recommended Land Pattern

●Land pattern (Unit:mm)

■ Reﬂow Soldering Condition

Preheat ; 150℃ to 180℃, Within 120sec. Preheat ; 150℃, Within 120sec.

■ Surface Mount Type Taping Speciﬁcations (Unit:mm)

size(φD×L) Y±0.3 H±0.2 W±0.2 P±0.1 E±0.1 F±0.1 T±0.2 S±0.1

Reel dimensions (Unit:mm)

Minimum Packing Quantity

■ Radial Lead Type Taping Speciﬁcations for Automatic Inserting Machines

Only straight taping for EP-cap. ★1 Fig.2, Fig.3:±0.5