TERMINAL STRIPS INTERLOCKING PC MOUNT

TERMINAL STRIPS
DUAL ROW TERMINAL STRIPS PC mount screw-clamp blocks with terminals on
5mm (0.197”) centers. Interlock two or three
UL94V-0 black thermoplastic.
position blocks to provide strips of any required
Brass, tin-plated terminals.
length. Accepts up to 14 AWG wire.
Steel, Ni-plated screws.
Rated 10A, 300 Volts.
DUAL ROW 20 AMP Side wire entry. 0.55” high x
Rated 20 A @ 300 Volts. Accepts wire from 22 to 0.41” wide.Green.
14 AWG. 0.375” (9.5mm) centers. 0.85” wide x
COND. CAT# EACH 100
0.52” high. Mounting holes on 8mm centers.
2 TER-202 65¢ 45¢ each
CAT# Circuits Length Ea 25 100 3 TER-203 60¢ 45¢ each
TS-202 2 1.42” .73 .68 .62
TS-203 3 1.79” 1.09 1.01 .94 PC MOUNT TERMINAL STRIPS
TS-204 4 2.16” 1.46 1.35 1.25 PC-mount screw-clamp terminals on 5mm
TS-205 5 2.53” 1.82 1.69 1.56 (0.197") centers. 10mm ( 0.40”) high. Blocks
TS-206 6 2.91” 2.18 2.03 1.87 longer than 3 positions consist of 2 & 3 position
TS-207 7 3.29” 2.55 2.37 2.18 interlocking strips. Will interlock w/ other similar
TS-208 8 3.66” 2.91 2.70 2.50 strips to make longer configurations. Accepts
up to 14 AWG wire. Rated 10 A, 300 Volts.
TS-209 9 4.03” 3.28 3.04 2.81
Numbered in the following configurations:
TS-210 10 4.40” 3.36 3.12 2.88
3-POSITION, NUMBERED 1 - 3
DUAL ROW 25 AMP CAT# TER-403
Rated 25 A @ 300 Volts. Accepts wire from 22 to
34¢ each • 100 for 18¢ each
12 AWG. 0.438” (11mm) centers. 1.1” wide x 500 for 14¢ each • 1000 for 10¢ each
0.55” high. Mounting holes on 10.7mm centers. 4-POSITION (2 X 2), NUMBERED 1 - 4
CAT# Circuits Length Ea 25 100 Two interlocking 2-position blocks.
TS-302 2 1.62” .81 .76 .70 CAT# TER-404
TS-303 3 2.05” 1.22 1.13 1.05 45¢ each • 100 for 20¢ each
TS-304 4 2.48” 1.62 1.51 1.40 500 for 15¢ each • 1000 for 12¢ each
TS-305 5 2.91” 2.03 1.89 1.76
5-POSITION, NUMBERED 1 - 5
TS-306 6 3.34” 2.43 2.27 2.11 Two interlocking blocks, 1-3 & 4-5.
TS-308 8 4.20” 3.24 3.02 2.81 CAT# TER-405
TS-310 10 5.08” 4.05 3.78 3.51 53¢ each • 100 for 25¢ each
500 for 20¢ each • 1000 for 15¢ each
DUAL ROW 30 AMP
Rated 30 Amps @ 600 Volts. Accepts wire from 5-POSITION, NUMBERED 6 - 10
22 to 10 AWG. 1.34” wide x 0.63” high. Two interlocking blocks, 6-8 and
9-10. Interlock with TER-405 for
CAT# Circuits Length Ea. 25 100 consecutive numbering 1-8 or 1-10.
TS-402 2 2.04" 1.01 .95 .88 CAT# TER-461
TS-403 3 2.60” 1.52 1.42 1.32 53¢ each • 100 for 38¢ each
TS-404 4 3.13” 2.03 1.89 1.76
TS-405 5 3.68” 2.53 2.36 2.19 6-POSITION, NUMBERED 1 - 6
TS-406 6 4.24” 3.04 2.84 2.63 Two interlocking 3-position blocks.
CAT# TER-406
TS-407 7 4.80" 3.54 3.31 3.07
53¢ each • 100 for 28¢ each
TS-408 8 5.33” 4.05 3.78 3.51
500 for 23¢ each • 1000 for 18¢ each
TS-410 10 6.45" 5.06 4.73 4.39

INTERLOCKING 3-POSITION
JUMPERS FOR TERMINAL STRIPS
PC mount,
DUAL ROW STRIPS screw-clamp
Ties two consecutive terminals together. terminal strips.
May be overlapped to tie more than two. Interlocking 3-terminal segments can be com-
bined to make desired length strip. PC pins on
For TS-200 series (Dual Row 20 Amp Strips) 5mm (0.197") centers. Side wire entry. Screws
CAT# JMP-24 5 for 90¢ • 100 for $14.00 on 45° angle. Each segment is 15.0 x 12.5 x
For TS-300 series (Dual Row 25 Amp Strips) 12.5mm. Accept up to 14 AWG wire. Sold in 21
CAT# JMP-25 5 for 90¢ • 100 for $14.00 terminal strips (7 x 3 segments).
CAT# TER-321 75¢ strip
For TS-400 series (Dual Row 30 Amp Strips) 10 strips 50¢ each • 100 strips 40¢ each
CAT# JMP-26 5 for 95¢ • 100 for $15.00 1000 for 25¢ each
40 ORDER TOLL FREE 1-800-826-5432
4-POSITION PLUGGABLE 100 AMP BRASS BUSS BAR
TERMINAL STRIP & HEADER Bocatech® Inc BTMH-15B
Riacon 4-position screw-clamp Specifications:
terminal block and mating friction- • Rated voltage: 48 Volt DC / 300 Volt AC
lock header. Terminals on 5mm • Two feed terminals 1/4-20 thread brass studs
centers. For 12-28 AWG wire. • Ten distribution terminals 8-32 brass screws
Rated 6A/125Vac. UL, CSA. • Solid brass on insulated base
CAT# TER-104 95¢ pair • Dimensions: 5-3/4" (L) x 1-1/4" (W) x 1-1/16"
10 for 75¢ per pair • 100 for 60¢ per pair (height at the stud)
• Two mounting holes: 5-1/4" center to center
24-POSITION SINGLE-ROW CAT# BR-100 $6.95 ea. • 10 for $6.50 ea.
TERMINAL STRIP, FEED-THRU
SPRING-LEVER
TERMINAL STRIP
2.25" SQUARE BEZEL
Red and black spring-lever
RDI/ Buchanan 4-series / AMP 796598-6. terminals in a recessed cup
Single-row barrier strip. Screw terminals on that fits a 50mm (1.95") diameter
0.325" centers. 0.5" feed-through pins. round cut out. 57mm (2.23")
7.9" x 0.60" x 0.50" high. Rated 15A, 150V. square bezel with countersunk
For 14-22 AWG wire. UL, CSA. mounting holes in each corner.
CAT# TER-24FT $2.00 each CAT# SWT-202 2 for $1.00 • 100 for 35¢ ea.
10 for $1.70 each

EUROSTYLE TERMINAL STRIPS ELECTRET MICROPHONES

The electret microphones listed below require a
low current voltage of 1.5 - 10 Vdc to operate.
They will not function in applications that are
not specifically wired for electret microphones.

ELECTRET MICROPHONE
Hosiden# KUB6133-010070.
For connecting stripped wires from 8-22 AWG 6mm diameter x 2.7mm
depending on the block size. Flexible white element with 30mm red and black leads.
(natural) Nylon 66 body, 94V2 rated for 105º C. CAT# MIC-613 75¢ 50¢ each
400 Volts. All metal parts are completely 10 for 30¢ each
recessed in the housing to prevent shorts.
Each strip has 12 circuits, with a mounting hole ELECTRET MICROPHONE
between each circuit. Can be easily shortened Panasonic # WM-063
with a knife or saw. 6mm diameter x 5mm. Solder spot connections.
7 AMP CAT# MIC-063 2 for $1.00
For 22-18 wire. 3.78” x 0.67” x 0.57” h. 10 for 45¢ each • 100 for 40¢ each
0.32”(8mm) terminal centers. UL, CSA, VDE.
CAT # TB-7 $2.00 each MINI-ELECTRET CONDENSER
10 for $1.80 each • 100 for $1.60 each MICROPHONES New Item
Omni-directional.
20 AMP 6.0mm dia. x 1.8mm.
For 18-14 wire. 4.6” x 0.80” x 0.67” h. Frequency range: 20-200,000Hz.
0.39”(10mm) terminal centers. UL, CSA, VDE. 2.2KΩ impedance.
CAT # TB-20 $2.25 each
EM-B6018P. PC pins on 1.9mm centers.
10 for $2.10 each • 100 for $1.80 each
CAT # MIC-36 3 for 99¢ • 100 for 25¢ ea.
35 AMP EM-B6018. Solder pads on 1.9mm centers.
For 14-10 wire. 5.38” x 0.93” x CAT # MIC-37 3 for 99¢ • 100 for 25¢ ea.
0.75” h. 0.46”(11.5mm) terminal centers. UL.
CAT # TB-35 $2.70 each
ELECTRET MICROPHONE, 15’ CORD
10 for $2.45 each • 100 for $2.15 each
Durable rubberized housing,
13mm dia. x 31mm long.
50 AMP Mounting plate with adjustable
For 20-8 wire. 6.25” x 1.00” x ball-joint. 15’ shielded cable.
0.99” h. 0.53”(13.5mm) terminal centers. UL. CAT# MIC-12 $1.15 each
CAT # TB-50 $4.00 each 50 for 95¢ each
10 for $3.85 each • 100 for $3.60 each
FAST FRIENDLY SERVICE 41