SOLENOID VALVE ASCO LowPower - Gseries - R8 PDF
SOLENOID VALVE ASCO LowPower - Gseries - R8 PDF
SOLENOID VALVE ASCO LowPower - Gseries - R8 PDF
4
1.4 W Low Power Solenoid Valves 4/2•5/2•5/3
Aluminum, Brass, or Stainless Steel Bodies SERIES
1/4" to 1" NPT Low
Power
Features
• Molded one-piece solenoid with highly efficient solenoid % ^ )
cartridge and special low wattage coil
• Increased ambient temperature capabilities up to 175˚F (80˚C)
• Designed for use in automation of plant control systems
to provide:
-PLC compatibility -Reduced battery drain
-Reduced heat rise -Reduced wiring cost
• Wide selection includes 2/2 normally closed, 3/2 normally
closed (including Quick Exhaust), 3/2 universal, 4/2, 5/2, & 5/3
• Air or inert gas only
• Lower-cost alternative to intrinsically safe valves in critical
applications not requiring a safety barrier
Construction
Valve Parts in Contact with Fluids
Body Aluminum Brass Stainless Steel
Seals and Discs PUR, NBR, CR, as listed
SPECIAL SERVICE
Sleeve 304L Stainless Steel
Core and Plugnut 430F Stainless Steel
PILOT
Core Springs 302 Stainless Steel
Pilot Seat Cartridge (Series 8316 & 8344 only) POM
Rider Rings PTFE
Spring Retainer POM
Electrical
Max. Ambient Insulation
Description Wattage Temp. T Code Class TPL
Standard Ambient Version 1.4 W 140˚F (60˚C) T6 F -
High Ambient Version 1.8 W 179˚F (80˚C) T5 F #23033
Surge Suppession Version 1.7 W 140˚F (60˚C) T6 F -
Surge Suppession High Ambient Version 2.0 W 179˚F (80˚C) T5 F #23033
8314 with
¨ IMPORTANT: Supervisory and leakage current above the drop out current listed will Manual Operator
cause improper operation. Consult your local ASCO sales office for additional assistance.
Min. 3-Way 2-Way Coil resistance Ordering
Voltage Pull In Drop Out Drop Out @ 68˚F (20˚C)
Normal Ambient Version
Description Wattage (DC) (mA) (mA) ¨ (mA) ¨ (ohms)
EV8551G322 24VDC
12V 83.5 13.9 3.2 102
High Ambient Version (always add TPL #23033)
Standard Ambient 24V 42.0 7.0 1.6 410
1.4 W EFX8316G301-23033 24VDC
Version 48V 21.4 3.6 0.8 1640
120V 8.7 1.4 0.3 10000 Solenoid Enclosures
12V 94.3 15.7 3.6 80 Standard: Watertight, Types 1, 2, 3, 3S, 4, and 4X.
High Ambient Optional: Explosionproof and Watertight, Types 3, 3S, 4,
1.8 W 24V 47.9 8.0 1.8 320
Version
48V 24.0 4.0 0.9 1260 4X, 6, 6P, 7, and 9.
12V 94.3 15.7 3.6 80 (To order, add prefix “EF” to catalog number. For
Surge Suppersion explosionproof with 316 Stainless Steel hub and
1.7 W 24V 47.9 8.0 1.8 320
Version trim, specify prefix "EV".) Surge suppression coils
48V 22.7 3.8 0.9 1470
also available “MF” prefix.
Surge Suppession 12V 105.3 17.6 4.0 64
High Ambient 2.0 W 24V 54.1 9.0 2.1 270
See Optional Features Section for other available options.
Version 48V 24.0 4.0 0.9 1260 Approvals
UL listed General Purpose Valves (Hazardous Location
Standard Ambient High Ambient Classified). EV8345G381 solenoid only UL listed. CSA
24VDC Spare Coil P/N Temp. Version Temp Version certified; nonincendive for Class I, Division 2 UL E25549.
General Purpose 238710-902-D* 238710-908-D* Meets applicable CE directives.
Explosion Proof 238714-902-D* 238714-905-D* SIL 3 capable per IEC 61508 on 8314 and 8316 const. Third
Explosion Proof, Corrosion Resistant 274714-902-D* 274714-905-D* party certification provided by EXIDA.
Explosion Proof, Surge Suppression 276006-006-D* 276006-106-D* Refer to Engineering Section for details.
Explosion Proof, Corrosion Resistant, Surge Suppression 276007-006-D* 276007-106-D* ATEX/IECEx certified with prefix “EV” as listed. Refer
to Optional Features Electrical Section for details. 131
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
132
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
SPECIAL SERVICE
316L Stainless Steel 5/2 EV8553G321 ¬≈∆≥ 22 EV8553G322 ¬≈∆≥ 22
¡ Brass construction supplied standard with EF solenoid. ¬ Stainless steel construction supplied standard with EV solenoid.
PILOT
≈ Can be used for dry natural gas service with the EF or EV prefix. ∆ Solenoid only approvals with EF of EV prefix, no approvals with general purpose coil (no prefix).
≥ ATEX/IECEx certified with prefix “EV”.
133
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
Operating Pressure
Kv Flow Differential (bar)
Factor (m3/h) Air-Inert Gas Max. Single Solenoid Dual Solenoid
Pipe Orifice Fluid and
Size Size Pressure to Cylinder to Ambient Const. Const.
(in) (mm) Cylinder Exhaust Min. Max. Temp. °C Catalog Number Ref. Catalog Number Ref.
1/4 6 0.69 0.86 0.7 10 60 8344G370 ¨¬ 9 8344G344 ¬ 12
3/8 10 1.20 1.89 0.7 10 60 8344G372 ¨¬¥ 11 8344G380 ¬¥ 10
1/2 10 1.20 1.89 0.7 10 60 8344G374 ¨¬¥ 11 8344G382 ¬¥ 10
3/4 19 4.46 4.80 0.7 10 60 8344G376 ¨¬ 13 8344G354 ¬ 14
1 19 4.46 4.80 0.7 10 60 8344G378 ¨¬ 13 8344G356 ¬ 14
¨ There are two exhaust flows in the exhaust mode (pilot and main). The pilot exhaust must be connected to the main exhaust when the air or inert gas cannot be exhausted to atmosphere.
¡ For "Quick Exhaust" valves, pressure port is 1/16", exhaust port is 1/4".
¬ IMPORTANT: A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must be installed in the cylinder lines only.
ƒ Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum 1.0 bar Operating Pressure Differential when selection gasket
is in the internal position.
≈ Can be used for dry natural gas service with the EF or EV prefix.
∆ Safety manual and FMEDA (Failure Modes Effects and Diagnostic Analysis) report available.
≥ SIL 3 Capable, Certified by Exida, only valid when used as Normally Closed.
¥ ATEX/IECEx certified with prefix “EV”.
134
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
SPECIAL SERVICE
316L Stainless Steel 5/2 EV8553G321 ¬≈∆≥ 22 EV8553G322 ¬≈∆≥ 22
¡ Brass construction supplied standard with EF solenoid. ¬ Stainless steel construction supplied standard with EV solenoid.
PILOT
≈ Can be used for dry natural gas service with the EF or EV prefix. ∆ Solenoid only approvals with EF of EV prefix, no approvals with general purpose coil (no prefix).
≥ ATEX/IECEx certified with prefix “EV”.
135
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
Const. Ref. 1, 2
SPECIAL SERVICE
PILOT
136
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
Const. Ref. 3
SPECIAL SERVICE
PILOT
Const. Ref. 3A
137
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
Const.
Ref. A B C H K L M N P R W
in 1.61 1.41 1.66 6.78 3.68 3.38 2.16 .53 5.09 .50 3.31
4
mm 41 36 42 172 93 86 55 13 129 13 84
in X 1.78 X 7.40 3.93 4.44 2.81 .87 5.34 1.74 5.31
5
mm X 45 X 188 100 113 71 22 136 44 135
Const. Ref. 4, 5
1/8 NPT
.45 [11]
OPTIONAL MOUNTING
1/2 NPT BRACKET WITH
Ø .28 [7] HOLES
(4 PLACES) AVAILABLE
ON 3/4 SIZE ONLY
SPECIAL SERVICE
P
PILOT
EXH “E”
H K
3.82 [97]
W N R
B CYL
“A” C
Const. Ref. 6. 7
138
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
Const. Ref. 8
SPECIAL SERVICE
PILOT
Const. Ref. 18
139
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
Const. Exhaust
Ref. Dia “D” E F G H J K L N P W X Y Z Pipe Size
in Ø .28 .56 2.41 1.88 4.67 1.03 2.30 3.12 .72 3.72 4.75 1.41 1.56 .81
9 3/8
mm 7 14 61 48 119 26 58 79 18 95 121 36 40 21
in Ø .34 .76 3.12 2.62 4.89 1.50 2.11 3.18 .83 3.77 6.06 1.86 1.89 .83
10 1/2
mm 9 16 79 67 118 38 70 81 21 90 154 48 49 21
in Ø .34 .76 3.12 2.62 4.65 1.50 2.11 3.18 .83 3.53 6.06 1.86 1.89 .83
11 1/2
mm 9 35 97 99 138 53 54 116 40 99 210 54 67 30
in Ø .28 .56 2.41 1.88 5.06 1.03 2.71 3.12 .72 4.12 4.81 1.41 1.56 .81
12 3/8
mm 7 14 61 48 129 26 69 79 18 105 122 36 40 21
in Ø .34 .78 3.12 2.62 5.27 1.50 2.49 3.19 .84 4.16 6.06 1.88 1.91 .84
13 1
mm 9 16 79 67 134 38 63 81 21 106 154 48 49 21
in Ø .34 1.38 3.81 3.88 6.09 2.09 3.18 4.56 1.56 4.59 8.25 2.12 2.62 1.16
14 1
mm 9 35 97 99 155 53 81 116 40 117 210 54 67 30
1/8 NPT
.45 [11]
1/2 NPT
1/2 NPT
H
P P
K H
K
N X E
2 MOUNTING HOLES
PRESS DIA “D”
EXH
J
CYL CYL
“B” Z G “A”
Y
W
140
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
Const. Ref. 19
SPECIAL SERVICE
PILOT
Const. Ref. 20
141
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
MO L1
0 2
head screwdriver slot L2
1
Momentary push in with flat
MI
head screwdriver slot
SPECIAL SERVICE
0 2
1
PILOT
MS 0 2
Push and turn to lock by hand 1
H1
Optional Manual Operators
Add Suffix Description
1/8 NPT AUX. PRESSURE PORT
1 W L1
Push and turn to lock with flat
MO L2
0 2
head screwdriver slot
1
Momentary push in with flat
MI
0 2
head screwdriver slot
1
MS 0 2
Push and turn to lock by hand
142
2/2•3/2
4/2•5/2•5/3
4
SERIES
Low
Power
L2 ¨ 6.49 (165)
H2 4.38 (111)
H1 1.57 (40)
W 1.77 (45)
H2 1/8 NPT
¨ Manual override option MH adds .250" (6.4),
MS option adds .468" (11.9) to each solenoid endcap.
3 1
0 2
head screwdriver slot L1
L2
1
Momentary push in with flat 1
MI 8551 NAMUR Footprint
0 2
head screwdriver slot
SPECIAL SERVICE
1
PILOT
MH Momentary push in by hand
1.26 (32)
2 4
0 2
1
1
MS 0 2
Push and turn to lock by hand .95 (24)
Const. Ref. 24
Series 8551 (316L SS) 8551 (5/3) 8553 3.02 [77]
NPT 1/4 1/4 1/2 2.03
L1 ¨ 5.20 (132) - 7.08 (180)
L2 ¨ 6.73 (171) 7.44 (189) 8.85 (225)
1
H2 4.38 (111) 4.38 (111) 4.77 (121) (8551) 1/4 NPT
(8553) 1/2 NPT
1 L1
Push and turn to lock with flat
MO L2
0 2
head screwdriver slot
1
Momentary push in with flat 8553 NAMUR Footprint 8551 NAMUR Footprint
MI
0 2
head screwdriver slot
1
1.26 (32)
2 4
1
.95 (24)
MS 0 2
Push and turn to lock by hand
1.57 (40)
143
144
SPECIAL SERVICE
PILOT