AS-Interface Handheld VBP-HH1-V3.

0-KIT

Dimensions

80 34
42.5 30

54
5
214
Spec.

155
3.0

Model number
VBP-HH1-V3.0-KIT
AS-Interface Handheld with accessory

Features Electrical connection

• Addressing and programming AS-In-
terface slaves
• Displaying the assigned slave addres- 1
1 AS-Interface +
ses and the status of the inputs 2 Digital input for optical addressing adapters
• Setting outputs at the AS-Interface 4 2 3 AS-Interface -
slave 4 Digital output for optical addressing adapters
5 Voltage supply for optical addressing adapters
• Also supports profiles S-7.7.A.7
5
3
(Spec 3.0), S-0.B and S-7.B (AS Inter-
face Safety at Work)
• The slave connection is short-circuit
and overload proof Indicating / Operating means
• Battery charger included with delivery

Display

„“ button ==> Increments slave address

„MODE“ button ==>

Einstellen des Betriebsmodus
„¯“ button ==> Dencrements slave address
229188_eng.xml

„PRG“ button ==>

Programs new slave address

„ADR“ button ==>

Reads slave address/switches on device
Release date: 2019-08-23 12:40 Date of issue: 2020-02-03

ATTENTION!
Charge accumulator prior to initial commissioning.

Technical data
General specifications
AS-Interface specification V3.0
Operating mode Plug-in charging unit, 230 V AC, included in the delivery package
Indicators/operating means
Display LC display
Keyboard membrane keys, 5 keys
Electrical specifications
Operating duration 8 h or ≥ 250 read/write procedures for fully charged battery
Power supply battery mode, please use only battery charger included with deli-
very to charge (charging time about 14 h)

1
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 4411 Singapore: +65 6779 9091
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com
 AS-Interface Handheld VBP-HH1-V3.0-KIT

Interface Function
Interface type AS-Interface, short-circuit proof and overload-proof, or optical
Open loop voltage 28 V The AS-Interface Handheld VBP-HH1-V3.0 is
Load current 100 mA at 25 V
an addressing device according to the ASIn-
Directive conformity
Electromagnetic compatibility
terface specification 3.0.
Directive 2014/30/EU Handheld: EN 61326-1:2013 This addressing device can be used to pro-
Plug-in charging unit EN 61000-3-2:2014 , EN 61000-3-3:2013 , gram AS-Interface slaves and to test part of
EN 55022:2010+AC:2011 , EN 55024:2010 their functions.
Low voltage In addition, new functions have been incorpo-
Directive 2014/35/EU Plug-in charging unit EN 60950-
1:2006+A14:2009+A1:2010+A12:2011+A2:2013 rated:
Standard conformity n Permanent data exchange with
Degree of protection EN 60529:2000 AS-Interface slaves
Electrical safety Plug-in charging unit EN 60950-
1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Emitted interference Handheld: EN 61326-1:2013
n Support of the data exchange
Plug-in charging unit EN 55022:2010+AC:2011 , with 4E4A slaves in ext.
EN 55024:2010 addressing mode
Noise immunity Handheld: EN 61326-1:2013
Plug-in charging unit EN 61000-3-2:2014 , EN 61000-3-3:2013 n Indication of the safety code for
Ambient conditions AS-Interface Safety-at-Work
Ambient temperature 0 ... 40 °C (32 ... 104 °F)
Storage temperature -20 ... 40 °C (-4 ... 104 °F) slaves
Mechanical specifications The AS-Interface connection adapter on the
Degree of protection IP20
Material
top of the addressing device is used for con-
Housing plastic necting AS-Interface slaves (sensors, actua-
Mass approx. 1000 g tors and modules) to the addressing device.
The following devices and designs can be
Notes connected to the addressing device by
directly plugging it onto the AS-Interface con-
The set VBP-HH1-V3.0-KIT consists of the nection adapter:
addressing device VBP-HH1-V3.0, the power Devices with M12 connector, VariKont M-sys-
supply VAZ-9VDC-CHRG and the connecting tem, VariKont system, FP design, AS-Inter-
cable module / handheld VAZ-PK-1,5M-V1-G face modules of the types G1 and G4.
in a matching case. For device designs with integrated addres-
sing socket, please use the optional adapter
cable.

Accessories
V1S-TEE-V1/V1S
T-Distributor, M12 connector to M12 so-
cket/connector
VAZ-PK-FK-0,2M-V1-W
Adapter cable G10 module/hand-held
programming device
VAZ-PK/G20-1M-V1-G
Adapter cable G20 module/hand-held
programming device
229188_eng.xml
Release date: 2019-08-23 12:40 Date of issue: 2020-02-03

2
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Pepperl+Fuchs Group USA: +1 330 486 0001 Germany: +49 621 776 4411 Singapore: +65 6779 9091
www.pepperl-fuchs.com fa-info@us.pepperl-fuchs.com fa-info@de.pepperl-fuchs.com fa-info@sg.pepperl-fuchs.com