Managed Gigabit Switches: Product Highlights
Managed Gigabit Switches: Product Highlights
Managed Gigabit Switches: Product Highlights
Superior Reliability
Per-port surge protection, Ethernet Ring Protection
Switching (ERPS), and Redundant Power Supply
(RPS) features maximize service availability
DGS-3000 Series
Managed Gigabit Switches
Features The DGS-3000 Series Managed Gigabit Switches are part of the Layer 2 family of D-Link’s
managed switch product line that provides wired Gigabit speeds for Metro Ethernet and
Reliable Hardware and Software Features campus networks. They feature a variety of ports, including 10/100/1000BASE-T RJ-45 ports, 1G
• 6 kV surge protection for Ethernet ports SFP ports, and 10G SFP+ ports for increased network bandwidth. Surge protection, advanced
• Real Time Clock (RTC) Layer 2 functions, and a suite of security and management tools make the DGS-3000 Series
• Dying Gasp Managed Gigabit Switches ideal for Metro Ethernet and campus applications.
• Ethernet Ring Protection Switching (ERPS)
• Redundant Power Supply (RPS) support Multi-Gigabit Performance
Advanced Switch Features The DGS-3000 Series Managed Gigabit Switches come with a variety of port types, including
• VLAN trunking 1 G RJ-45 ports, 1 G SFP ports, and 10G SFP+ ports, with all models offering a minimum of
• VLAN mirroring at least 2 1 G SFP ports. The DGS-3000-28X, DGS-3000-28XS, and DGS-3000-52X offer 4 10G
• ISM VLAN (Multicast VLAN) SFP+ ports for improved bandwidth and fault tolerance. The DGS-3000-28LP and DGS-3000-
• RSPAN 28XMP switches feature Power over Ethernet (PoE), allowing compatible devices to be installed
in remote locations without immediate access to power outlets.
Comprehensive Security Features
• Access Control Lists (ACLs) Efficient and Resilient Networking
• D-Link Safeguard Engine
The DGS-3000 Series supports up to 6 kV surge protection on all Ethernet ports, protecting
• BPDU attack protection
the switch from power surges due to lightning strikes or faulty electrical cabling. The
• ARP spoofing prevention
DGS-3000 Series supports ITU-T G.8032 Ethernet Ring Protection Switching (ERPS), which
• IP-MAC-Port Binding allows 50 millisecond failover in the event of a failure of one of the rings, minimizing service
• DoS attack prevention disruption. The switches also support IEEE 802.1AX and 802.3ad Link Aggregation, which
• IEEE 802.1X port-based Access Control allows grouping of multiple ports to provide redundancy and load balancing in mission-critical
• WAC/MAC-based Access Control environments.
• Guest VLAN
System Management
• 802.1ag CFM
• 802.3ah Ethernet Link OAM
• SNMP v1/v2c/v3
• RMON v1/v2
• LLDP/LLDP-MED
DGS-3000 Series Managed Gigabit Switches
DGS-3000-10L DGS-3000-20L
DGS-3000-28L DGS-3000-28LP
DGS-3000-28X DGS-3000-28XS
DGS-3000-52L
DGS-3000-28XMP
DGS-3000-52X
DGS-3000 Series Managed Gigabit Switches
Technical Specifications
Model Number DGS-3000-10L DGS-3000-20L DGS-3000-28L DGS-3000-52L
Hardware Version B1
Interface
Size • 11-inch standard • 11-inch standard • 19-inch standard • 19-inch standard
rack-mount width rack-mount width rack-mount width rack-mount width
• 1U height • 1U height • 1U height • 1U height
Interface • 8 10/100/1000 Mbps + 2 SFP • 16 10/100/1000 Mbps + 4 SFP • 24 10/100/1000 Mbps + 4 SFP • 48 10/100/1000 Mbps + 4
SFP
Network Cables • UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half-duplex • Half/full-duplex for 10/100 Mbps and full-duplex for 1000 Mbps speeds
Performance
Switching Capacity 20 Gbps 40 Gbps 56 Gbps 104 Gbps
Maximum 64-byte Max. 14.88 Mpps 29.76 Mpps 68.45 Mpps 104.16 Mpps
Packet Forwarding Rate
LEDs
Power (per device)
Fan Error
Physical/Environmental
MTBF 841,608 hours 762,952 hours 635,099 hours 501,290 hours
Heat Dissipation 46.405 BTU/h 53.229 BTU/h 60.1 BTU/h 132.99 BTU/h
Standby Power Consumption 9.4 W/100 V 9.8 W/100 V 10.1 W/100 V 22.7 W/100 V
9.6 W/240 V 10.5 W/240 V 10.6 W/240 V 22.8 W/240 V
Dimensions (W x D x H) 280 x 140 x 44 mm (11.02 280 x 140 x 44 mm (11.02 440 x 210 x 44 mm (17.32 440 x 210 x 44 mm (17.32
x 5.51 x 1.73 in.) x 5.51 x 1.73 in.) x 8.27 x 1.73 in.) x 8.27 x 1.73 in.)
Weight 1.24 kg (2.73 lb) 1.42 kg (3.13 lb) 2.00 kg (4.41 lb) 2.40 kg (5.29 lb)
Power Surge Protection All Ethernet ports support IEC61000-4-5 6 kV surge protection
Technical Specifications
Model Number DGS-3000-28X DGS-3000-28XS DGS-3000-52X
Hardware Version B1
Interface
Size • 19-inch standard • 19-inch standard • 19-inch standard
rack-mount width rack-mount width rack-mount width
• 1U height • 1U height • 1U height
Interface • 24 10/100/1000 Mbps + 4 10G SFP+ • 24 SFP + 4 10G SFP+ • 48 10/100/1000 Mbps + 4 10G SFP+
Network Cables • UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half-duplex • Half/full-duplex for 10/100 Mbps and full-duplex for 1000 Mbps speeds
Performance
Switching Capacity 128 Gbps 176 Gbps
LEDs
Power (per device)
Fan Error
Physical/Environmental
MTBF 652,062 hours 574,974 hours 465,240 hours
Dimensions (W x D x H) 440 x 210 x 44 mm (17.32 x 440 x 210 x 44 mm (17.32 x 440 x 210 x 44 mm (17.32 x
8.27 x 1.73 in.) 8.27 x 1.73 in.) 8.27 x 1.73 in.)
Weight 2.00 kg (4.41 lb) 2.10 kg (4.63 lb) 2.40 kg (5.29 lb)
Power Surge Protection All Ethernet ports support IEC61000-4-5 6 kV surge protection
Technical Specifications
Model Number DGS-3000-28LP DGS-3000-28XMP
Hardware Version B1
Interface
Size • 19-inch standard • 19-inch standard
rack-mount width rack-mount width
• 1U height • 1U height
Port Standards & Functions • Ports 1 to 24 compliant with both IEEE 802.3af/802.3at • Ports 1 to 24 compliant with both IEEE 802.3af/802.3at
DGS-3000 Series Managed Gigabit Switches
Network Cables • UTP Cat. 5, Cat. 5e (100 m max.); EIA/TIA-568 100-ohm STP (100 m max.)
Full/Half-duplex • Half/full-duplex for 10/100 Mbps and full-duplex for 1000 Mbps speeds
Performance
Switching Capacity 56 Gbps 128 Gbps
LEDs
Power (per device)
Fan Error
Physical/Environmental
MTBF 304,565 hours 268,693 hours
Dimensions (W x D x H) 440 x 210 x 44 mm (17.32 x 8.27 x 1.73 in.) 440 x 308 x 44 mm (17.32 x 12.13 x 1.73 in.)
Power Surge Protection All Ethernet ports support IEC61000-4-5 6 kV surge protection
Access Control List (ACL) • ACL based on • Up to 1024 ingress access rules
-- Switch port • Time-based ACL
-- 802.1p priority • ACL statistics
-- VLAN ID • CPU interface filtering
-- MAC address
-- EtherType
-- IPv4/IPv6 address
-- IPv6 traffic class
-- IPv6 Flow Label
-- DSCP
-- ToS
-- Protocol type
-- TCP/UDP port
-- User-defined packet content
Order Information
Part Number Description
DGS-3000-28LP 24 10/100/1000 Mbps PoE ports + 4 SFP ports managed Gigabit switch
DGS-3000-28X 24 10/100/1000 Mbps ports + 4 10G SFP+ ports managed Gigabit switch
DGS-3000-28XMP 24 10/100/1000 Mbps PoE ports + 4 10G SFP+ ports managed Gigabit switch
DGS-3000-52X 48 10/100/1000 Mbps ports + 4 10G SFP+ ports managed Gigabit switch
DPS-CB150-2PS v.B1 150 cm RPS cable for connecting the DGS-3000 Series with the DPS-500A and DPS-500DC
DEM-331R 1000BASE-LX, wavelength Tx: 1310 nm, Rx: 1550 nm, Single-mode, 40 km
DEM-431XT-DD 10GBASE-SR SFP+ transceiver (with DDM), 33 m: OM1 MMF, 82 m: OM2 MMF, 300 m: OM3 MMF
DEM-436XT-BXD 10GBASE-LR BiDi SFP+ transceiver (without DDM), wavelength Tx 1330 nm, Rx: 1270 nm, 20 km
DEM-436XT-BXU 10GBASE-LR BiDi SFP+ transceiver (without DDM), wavelength Tx 1270 nm, Rx: 1330 nm, 20 km
Optional 10 Gigabit Ethernet SFP+ Direct Attach Cables (DGS-3000-28X, 28XMP, 28XS, and 52X only)
DEM-CB100S 10G SFP+ 1 m Direct Attach Cable
Updated 12/26/2016
Specifications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2016 D-Link Corporation. All rights reserved. E&OE.