Intelligent IEC61850-3 Compliant 16+6 Integrated Device Server and Ethernet Switch
Features ââ Supports up to 16 Serial RS-232/422/485 ports with protocol gateway functionality with enhanced 1kV isolation ââ Supports 4 x 10/100/1000Base-T(X) ports and 2 x 100/1000Base-X SFP ports ââ Compliant with IEC61850-3 and IEEE1613 ââ Supports ModBus TCP, DNP3, and TIN serial protocols ââ 5 Host Devices: Virtual COM, TCP Server, TCP Client Mode ââ Supports application based QoS management ââ Security: SSL encryption - Secured management by HTTPS and SSH - IP Access, IP White list ââ Supports 2 In, 2 Out IRIG B (Future Option) ââ Supports SNMP v1/v2/v3 ââ Event warning by Syslog, Email, SNMP Trap, and Relay ââ 19 inch rack mount design ââ IP-40 Galvanized Steel Housing ââ Supports Dual Redundant Power Supplies ââ iDS Manager software supports centralized management and configurable by Web-based, Windows NT/2000/ XP/2003/VISTA/7 IEC 61850
All specifications are subject to change without notice. IS5 REV.06162016 Page—1 Introduction The iDS24GF is a modular Serial Device Server with up to 16 serial ports and 6 Ethernet ports designed for power substation applications. The iDS24GF is fully compliant with IEC 61850-3 and IEEE 1613. It has standard features such as a TCP/IP interface with versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP and a Modbus Gateway. In addition, using the Windows utility or the iDS Manager software; allows for the easy configuration of multiple devices and the setup of Virtual Com. Features such as the NAT Router Pass Through, DDNS, make it more convenient for administrators to configure the device servers through NAT routers from different IP domains or Internet via a remote modem. The iDS24GF can also simultaneously transfer data to 5 redundant host PC’s to avoid Ethernet connection breakdown or any host PC fails.
The iDS24GF supports a wide operating temperature of -40°C to +85°C, allowing it to operate in harsh industrial environments making it ideal for the high demand of secure serial to Ethernet data communication.
Specifications Model Number iDS24GF Physical Ports RS-232/RS-422/RS-485 DB9 and/or Up to 16 RJ45 Serial Ports
10/100/1000Base-T(X) RJ45 Ports
4 Auto MDI/MDIX
100/1000Base-X SFP Ports 2
Technology IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1D for STP (Spanning Tree Protocol) Ethernet Standards IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) ITU-T G.8032v2 Ethernet ring (<50mS recovery) IEEE 802.3ad LAG with LACP IEEE 802.1q VLAN segregation VLAN tagging according to L2-L4 headers IEEE 802.1p per port queues
MAC Table 16k
Priority Queues 8
Processing Store-and-Forward
Line rate L2/L3 switching throughput
Switch Properties Switching latency <10μSec Max. Number of Available VLANs: 4K
Jumbo frame Up to 9K Bytes
All specifications are subject to change without notice | IS5 REV.06162016 www.iS5com.com | Page—2 Https / SSH enhance network security Enable/Disable port Port access filter per MAC / IP addresses Egress filtering per VLAN SCADA firewall per port (Modbus, IEC101/104, DNP3.0) Remote access using reverse SSH tunnel Security Features Limited access authorizations per user Local and remote user authentication and authorizations Traffic activity log for Trail audit Command-Line interface over local console or over remote SSH SNMPv1/v2/v3 Local and remote user authentication (RADIUS, TACACS)
STP/RSTP/MSTP (IEEE 802.1D/w/s)
TOS/Diffserv supported VLAN (802.1Q) with VLAN tagging and GVRP/GMRP supported IGMP Snooping IGMP v1,v2,v3 Software Features Application-based QoS management Port configuration, status, statistics, monitoring, security DHCP Client/Server FTP/SFTP client TFTP client SMTP Client Telnet Server/Client
Transparent tunneling serial streams
Protocol Gateway - Serial to Ethernet (Modbus, EC101/104, DNP3.0, TG 800) Bridging Serial Streams ModBus RTU Terminal Server
RS-232 Serial Console Port in DB9 connector with console cable. 9600 bps, , 8, N, 1 Local Console port for: - Emergency boot Local Operation - Discrete inputs for user-defined triggers - Discrete outputs reporting system alarms - Failsafe output relay reporting critical alarm
Fault Contact Relay Relay output capacity of 2A at 24VDC
Power Redundant Power Supplies: Dual DC Inputs 9-36VDC, Dual DC Inputs 36-72VDC, Input Power or Dual Input 88-370VDC or 85-264VAC
Dimension (W x D x H) 440.5 (W) x 331.4 (D) x 44 (H) mm (17.34 x 13.05 x 1.73 inches)
Weight (g) ~6000 g
Environmental Storage Temperature -40°C to +85°C (-40°F to +185°F)
Operating Temperature -40°C to +85°C (-40°F to +185°F) No Fans
Operating Humidity 5% to 95% Non-condensing
All specifications are subject to change without notice | IS5 REV.06162016 www.iS5com.com | Page—3 Regulatory Approvals Power Automation IEC 61850-3, IEEE 1613
All specifications are subject to change without notice | IS5 REV.06162016 www.iS5com.com | Page—4 Ordering Information Power Power Serial Serial Serial Serial Ethernet Ethernet Base Mount Description Supply 1 Supply 2 Port 1-4 Port 5-8 Port 9-12 Port 13-16 Port 1-4 Port 5-6 iDS24GF HV XX RF 4DB09 4DB09 4DB09 4DB09 4GRJ45 2GSFP
RF | | | | | | Rack Mount Power Terminals in the Front/Display Rear
RR | | | | | | Rack Mount Power Terminals in the Rear/Display Front
P | | | | | | Panel Mounting
N | | | | | | No Mounting Hardware
XX XX XX XX | | None
4RJ45 4RJ45 4RJ45 4RJ45 | | 4 X RS232/422/485 RJ45 Serial
4DB09 4DB09 4DB09 4DB09 | | 4 X RS232/422/485 DB9 Serial
4GRJ45 | 4 X 10/100/1000Base-T(X) RJ45
2GSFP 2 X 100/1000Base-X SFP (Blank no optical transceivers**)
Example Order Code: iDS24GF-HV-XX-RF-4DB09-4DB09-4DB09-4DB09-4GRJ45-2GSFP-C1-F3.07
Description: 16+6 Device Server/Switch, (Power Supply 1) Input 88-370VDC or 85-264VAC, (Power Supply 2) None, Rack Mount Power Terminals in the Front/Display Rear, 4 x RS232/422/485 DB9 Serial Ports, 4 x RS232/422/485 DB9 Serial Ports, 4 x RS232/422/485 DB9 Serial Ports, 4 x RS232/422/485 DB9 Serial Ports, 4 x 10/100/1000Base-T(X) RJ45 Serial Ports, 2 x 100/1000Base-X SFP Ports, Conformal Coating, Firmware version 3.07 C1 – Add for conformal coating FW – Leave blank for latest firmware NOTE: When selecting 2GSFP (Blank no optical transceivers**) **SFP’s to be ordered separately.
All specifications are subject to change without notice | IS5 REV.06162016 www.iS5com.com | Page—5 **SFP’s to be ordered separately.
