Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

DS JetNet 5210G V1.1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

INDUSTRIAL ETHERNET SWITCH

Industrial 8FE + 2G Combo Managed Switch

JetNet 5210G Korenix JetNet 5210G, the DIN-Rail type Industrial Gigabit
Managed Switch is designed with eight 10/100TX ports and two
Gigabit RJ-45 / SFP combo ports. The two Gigabit Ethernet
combo ports provide high speed uplink to connect with higher
level backbone switches with Korenix MSRTM network redundancy
technology, while ensuring the reliability of data transfer through
the exclusive recovery time in several milliseconds and seamless
restoration.

JetNet 5210G is designed for operating reliably under harsh


environment, it supports one alarm relay to indicate fault
conditions when any link or power failure happens, as a result,
users can quickly handle the emergency and shorten the failover
time. With EN50121-4 certified design, including robust enclosure
and -40~75oC wide operating temperature range, JetNet 5210G
ensures high performance in rolling stocks, traffic control systems
and other harsh Network applications.

Specification
 8 10/100 Base TX ports and 2 Gigabit RJ-45/ SFP combo ports
 SFP ports support 100/1000 Mbps with Digital Diagnostic Monitoring (DDM) to monitor fiber quality
 Network Redundancy – MSR (Multiple Super Ring),ITU-T G.8032 ERPS, RSTP, MSTP, Super Chain, ERPS V2
 Fully Device Management – SNMP v1/v2c/v3, RMON, Web UI, Telnet and Local Console
 Friendly Device and Network Topology recovery utility – Korenix View, Korenix NMS
 Layer 2 Network Performance – IEEE802.1Q VLAN, Private VLAN, Trunk, Packet Filtering, DHCP
Server/Client, Traffic Prioritize, Rate Control
 Advanced Security system by Port Security, Access IP list, SSH, HTTPS Login, TACACS+
 Event Notification through E-mail, SNMP trap and SysLog
 IEEE 802.1AB LLDP and optional Korenix NMS software for auto-topology and group management
 Cisco-Like CLI, Web, SNMP/RMON for network management
 Multiple event relay output for enhanced device alarm control
 Hi-Pot Isolation Protection for ports and power
 Railway Track Side EN50121-4 Certification
 -40~75°C High Operating Temperature
 10~60VDC Redundant wide range power input

Korenix Technology Datasheet Preliminary 7/5/2019 www.korenix.com 1


Dimension

Specification
Technology
IEEE Standards IEEE 802.3 10 Base-T Ethernet
IEEE 802.3u 100 Base-TX Fast Ethernet
IEEE 802.3u 100 Base-FX Fast Ethernet Fiber
IEEE 802.3ab 1000 Base-T
IEEE 802.3z Gigabit Fiber
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS)
IEEE 802.1Q VLAN and GVRP IEEE 802.1QinQ
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IEEE802.3ad Link Aggregation Protocol (LACP)
IEEE802.1x Port Based Network Access Protocol
IEEE 1588 Precision Time Protocol
Performance
Switch Technology Store and Forward Technology with 5.6Gbps Switch Fabric
System Throughput 8.3Mega packet per second
CPU performance 32 bits ARM-9E running at 180 Mhz and performance up to 200MIPS; Embedded hardware based
watch-dog timer
System Memory 8M bytes flash ROM, 64M bytes SDRAM
Transfer packet size 64 bytes to 1522 bytes (includes double VLAN tag)
MAC Address 8K MAC address table
Packet Buffer 1Mega bits shared memory for packet buffer.
Forwarding 14,880 pps for Ethernet and 148,800 pps for Fast Ethernet, 1488,100 pps for Gigabit Ethernet
performance

Korenix Technology www.korenix.com 2


Interface
Enclosure Port • 10/100Mbps Ethernet port: 8 x RJ-45
• Gigabit Ethernet port : 2 x RJ-45 with auto MDI/MDI-X function
• 100Mbps / 1000Mbps Fiber port : 2 x SFP Socket for SFP fiber transceiver with Hot-
swappable and D.D.M. functions
• RS-232 Console port : 1 x RJ-45 for system configuration
• Digital Input / Relay Output port: 4-Pin removable terminal block connector
• Power input port: 4-Pin removable terminal block connector
E
Ethernet Cable 100 Base-TX: 4-pair Cat.5 e / Cat.6 UTP/STP câble, 100Meters
1000 Base-T: 4-pair Cat.5e/Cat.6 UTP/STP cable, 100Meters
Digital Input Digital Input (Hi): DC 11V~30V
Digital Input (Low): DC 0V~10V
Relay Output Dry Relay output: 0.5A / DC 24V
Supports Multiple Events Binding trigger function.
Diagnostic Indicators Power: Green On: (System power applied)
D.I.: Green On (digital signal high level is detected)
D.O.: Red On (relay active and form as)
Sys (System): Green On (System Ready), Blinking ( System perform firmware upgrade)
R.S.(Ring status): Green on (Ring normal) / Blinking (Ring with wrong port), Yellow on (Ring
abnormal) / Blinking (device's ring port failed)
LNK (Link): Green on, ACT (Active): Green Blinking
System Management
Telnet & Local Console Supports command line interface with Cisco-like commands and maximum 4 sessions; the telnet
interface also supports SSH
SNMP Support IPv4/IPv6, v1, v2c, v3 with SNMP trap function, trap station up to 4 and can be
manually configured the trap server IP address.
SNMP MIB MIBII, Bridge MIB, Ethernet-like MIB, VLAN MIB, IGMP MIB, Korenix Private MIB
Korenix Utility Supports Korenix View and Korenix NMS with IEEE 802.1AB Link Layer Discovery Protocol
for device and link auto-topology discovery
Network Time Protocol Supports NTP protocol with daylight saving function and localized time sync function.
Management IP Security IP address security to prevent unauthorized access
E-mail Warning 4 receipt E-mail accounts with mail server authentication
System Log Supports both Local or remote Server with authentication
Network Redundancy
TM
Multiple Super Ring (MSR) New generation Korenix Ring Redundancy Technology, Includes Rapid Super Ring, Rapid
Dual Homing, TrunkRingTM, MultiRingTM, SuperChainTM and backward compatible with
legacy Super RingTM.
TM
Rapid Dual Homing (RDH) Multiple uplink paths to one or multiple upper switch
TM
TrunkRing Integrates port aggregation function in ring path to get higher throughput ring architecture
TM
MultiRing Couple or multiple rings; Up to 4 100M rings and 2 Gigabit rings in single switch
TM
SuperChain It is new ring technology with flexible and scalability, compatibility, and easy
configurable. The ring includes 2 types of node Switch – Border Switch and Member Switch
Rapid Spanning Tree IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy Spanning Tree
and IEEE 802.1w multiple spanning tree
Loop Protection The Loop Protection prevents any network looping caused by RSTP and MSR ring topology
change
Network Performance
Port Configuration Port link Speed, Link mode, current status and enable/disable
Port Trunk IEEE 802.3ad port aggregation and static port trunk; trunk member up to 8 ports and
maximum 5 trunk groups include Gigabit Ethernet port
VLAN IEEE 802.1Q Tag VLAN with 256 VLAN Entries and provides 2K GVRP entries
3 VLAN link modes- Trunk, Hybrid and Link access

Korenix Technology www.korenix.com 3


Private VLAN Direct client ports in isolated/community VLAN to promiscuous port in primary VLAN
IEEE802.1 QinQ Supports Double VLAN Tag function for implementing Metro Network topologies
Class of Service IEEE 802.1p class of service; per port 4 priority queues.
Traffic Prioritize Supports 4 physical queues, weighted fair queuing (W.R.R.) and Strict Priority scheme,
which follows 802.1p CoS tag and IPv4 ToS/ DiffServ information to prioritize the traffic of
your industrial network
IGMP Snooping IGMP Snooping v1/v2 /v3 for multicast filtering and IGMP Query mode; also support
unknown multicasting process forwarding policies- drop, flooding and forward to router
port
Rate Control Ingress/Egress filtering for Broadcast, Multicast, Unknown DA or All packets
Port Mirroring Online traffic monitoring on multiple selected ports
Port Security Port security to assign authorized MAC to specific port
DHCP DHCP Client, DHCP Server with IP & MAC Address binding, DHCP relay and port based
DHCP server.
IEEE 802.1x Port based network access control
Mechanical
Installation DIN-Rail mounting
Case Steel metal with Aluminum heat-dissipate panel housing
Ingress Protection IP31
Dimension (mm) 80 (W) x 127(D) x 160 (H) – w/o DIN Rail Clip
80 (W) x 136.2(D) x 160 (H) – w/ DIN Rail Clip
Installation DIN-rail mounting
Weight 1.2Kg
Power Requirement
System power 2x DC power input with polarity reverse protection
Input Range DC 10-60V
Power system type Passive power system
Power Consumption 15Watt
Environmental
Operating Temperature -40 ~75oC
Operating Humidity 0% ~ 95%, non-condensing
Storage Temperature -40 ~ 85oC, 0% ~90% Humidity
Hi-Pot DC 2.25KV for power to chassis ground, Ethernet port to chassis ground
Regulatory Approvals
Rail Traffic EN50121-4
EMC IEC /EN61000-6-2, IEC/EN61000-6-4
EMI: FCC Class A, CE/ Class A
EMS: IEC/EN61000-4-2, IEC/EN61000-4-3, IEC/EN61000-4-4, IEC/EN61000-4-5,
IEC/EN61000-4-6, IEC/EN61000-4-8
MTBF 472,000 Hrs
Warranty 5 years

Korenix Technology www.korenix.com 4


Ordering Information

Model Name Description

JetNet 5210G Industrial 8 + 2 Gigabit RJ / SFP DIN Rail Managed Switch, -40~75°C
Includes:
• JetNet 5210G
• Quick Installation Guide
Note: Please download User Manual from Korenix website

Korenix Technology www.korenix.com 5

You might also like