Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    R.C.C. Design of Rectangular Sloped Footing

    Uploaded by

    Ibrahim Meharoof
    This document provides the design of a rectangular sloped footing. It includes input parameters such as material grades, dimensions, and loadings. Calculations are shown for determining the required depth, reinforcement amounts, and checks for bending, shear, and punching shear. The design was found to be satisfactory and safe based on the standards. The summary provides the footing dimensions, reinforcement of 16mm bars at 150mm spacing on both edges, and confirms the design meets requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    R.C.C. Design of Rectangular Sloped Footing

    Uploaded by

    Ibrahim Meharoof
    41 views4 pages
    This document provides the design of a rectangular sloped footing. It includes input parameters such as material grades, dimensions, and loadings. Calculations are shown for determining the required depth, reinforcement amounts, and checks for bending, shear, and punching shear. The design was found to be satisfactory and safe based on the standards. The summary provides the footing dimensions, reinforcement of 16mm bars at 150mm spacing on both edges, and confirms the design meets requirements.

    Original Description:

    foundation design

    Original Title

    F1

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides the design of a rectangular sloped footing. It includes input parameters such as material grades, dimensions, and loadings. Calculations are shown for determining the required depth, reinforcement amounts, and checks for bending, shear, and punching shear. The design was found to be satisfactory and safe based on the standards. The summary provides the footing dimensions, reinforcement of 16mm bars at 150mm spacing on both edges, and confirms the design meets requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    41 views4 pages

    R.C.C. Design of Rectangular Sloped Footing

    Uploaded by

    Ibrahim Meharoof
    This document provides the design of a rectangular sloped footing. It includes input parameters such as material grades, dimensions, and loadings. Calculations are shown for determining the required depth, reinforcement amounts, and checks for bending, shear, and punching shear. The design was found to be satisfactory and safe based on the standards. The summary provides the footing dimensions, reinforcement of 16mm bars at 150mm spacing on both edges, and confirms the design meets requirements.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 4

    CONCRETE DESIGN OF SLOPED FOOTING 07/13/2020

    Concrete Mix
    R.C.C. DESIGN OF RECTANGULAR SLOPED FOOTING
    Job: INT/MES/694/2018 Footing Category: F1 M25
    M30
    Steel Grade
    FE-250
    FE-415
    FE-500
    Reinforcement
    Ø8
    Ø10
    Ø12
    Ø16
    Ø20
    1. INPUT DATA (Design Based on Indian Standards Code IS:456-2000)

    Grade of Concrete fck = 30 N/mm2 Exposure


    Grade of Steel 'fy' fy = 500 N/mm2 Very Severe
    Proposed Reinforcement Dia. Ø = 16 mm Extreme
    Clear Cover to Reinforcement c = 75 mm Footing Depth
    Maximum upward pressure or SBC q0.max = 100 kN/m At Column Face
    2

    Column/Pedestal Length a = 0.10 m ###


    ---------|---------
    diagram above
    As shown in

    Column/Pedestal Width b = 0.10 m ###


    Footing Length L = 0.60 m ###
    \

    Footing Width W = 0.60 m ###


    Area Provided A = 0.36 m2 ###
    /

    2. DEPTH CALCULATION
    Factored upward pressure; Q = q0.maxϒƖ (ϒƖ=1.5) Q = 150 kN/m2 ###
    Bending moment at - XX Mux = 2.03 kNm ###
    Depth required in bending at - XX Dreq.x = 71.08 mm ###
    Bending moment at - YY Muz = 2.03 kNm ###
    Depth required in bending at - YY Dreq.z = 71.08 mm ###
    Hence, depth required from Bending Dreq = 72 mm ###
    Depth Provided at column face Dprov = 300 mm ###
    Depth Provided at free end dprov = 300 mm ###
    Effective depth at critical section D' = 217 mm ###
    HENCE, DEPTH PROVIDED IS SATISFACTORY IN BENDING ###
    3. REINFORCEMENT CALCULATION
    Nominal Bending Stress Mu/bd2 at - XX σƒx = 0.43 N/mm2 ###
    Corresponding Reinforcement % from SP16 preq.x = 0.11 % ###
    Ast required in bending at XX Ast.Req = 22 mm2 ###
    Min. Ast required at XX Ast.Min = 216 mm2 ###
    Required bar spacing across 'L' Sreq.x = 558 mm c/c ###
    Provided bar spacing across 'L' Sprov.x = 150 mm c/c
    Nominal Bending Stress Mu/bd2 at - YY σƒy = 0.43 N/mm2
    Corresponding Reinforcement % from SP16 preq.y = 0.11 %
    Ast Required in bending at YY Ast.Req = 22 mm2
    Min. Ast required at YY Ast.Min = 216 mm2

    Page 1 of 4
    CONCRETE DESIGN OF SLOPED FOOTING 07/13/2020
    Required bar spacing across 'W' Sreq.y = 558 mm c/c
    Provided bar spacing across 'W' Sprov.y = 150 mm c/c

    5. CHECK FOR BENDING/ONE-WAY SHEAR ALONG 'L'


    Depth at Critical Section along L dcx = 300 mm
    Width at Critical Section || to XX XX' = 534 mm
    One way shear force in XX' Vux = 3 kN
    Nominal Shear Stress in Concrete τvXX' = 0.02 N/mm2
    % Reinforcement provided across L ptx = 0.447 %
    Permissible Bending Shear Stress in Concrete τc = 0.474 N/mm2

    HENCE, FOOTING IS SAFE IN BENDING/ONE-WAY SHEAR ALONG 'L'

    4. CHECK FOR BENDING/ONE-WAY SHEAR ALONG 'W'


    Depth at Critical Section along W dcy = 300 mm
    Width at Critical Section || to YY YY' = 534 mm
    One way shear force in YY' Vuy = 3 kN
    Nominal Shear Stress in Concrete τvYY' = 0.02 N/mm2
    % Reinforcement provided across W pty = 0.447 %
    Permissible Bending Shear Stress in Concrete τc = 0.474 N/mm2

    HENCE, FOOTING IS SAFE IN BENDING/ONE-WAY SHEAR ALONG 'W'

    6. CHECK FOR TWO-WAY/PUNCHING SHEAR


    Depth at Critical Section along L (dpx @ distance D'/2 from XX) = 253 mm
    Depth at Critical Section along W (dpy @ distance D'/2 from YY) = 253 mm
    Width at Critical Section along L XX" = 317 mm
    Width at Critical Section along W YY" = 317 mm
    Punching Shear Resistance Area {2 x [(dpx . XX") + (dpy . YY")]} = 0.321 m2
    Punching Shear Force Area A' = {(L x W) - (XX" x YY")} = 0.26 m2
    Punching Shear Force; V'u = Q x A" V'u = 39 kN
    Punching Shear Stress in Concrete τ'v = 0.122 N/mm2
    Permissible Punching Shear Stress in Concrete τ'c = 1.369 N/mm2

    HENCE, FOOTING IS SAFE IN TWO-WAY/PUNCHING SHEAR

    7. CHECK FOR MAXIMUM SHEAR STRESS IN CONCRETE


    Max. Permissible Shear Stress in Concrete τc.Max = 3.50 N/mm2
    HENCE, SHEAR CAPACITY OF FOOTING IS FOUND SAFE AND IS WITHIN LIMITS
    OF MAX. PERMISSIBLE SHEAR STRENGTH
    8. FOOTING DESIGN SUMMARY
    Footing Sizing:
    Length of Footing L = 0.6 m
    Width of Footing W = 0.6 m
    Footing Depth @ Column Face D = 300 mm
    Footing Depth @ Free End d = 300 mm

    Footing Reinforcement:
    Across Long Edge L 16 mm Dia @ 150 mm c/c.
    Across Short Edge W 16 mm Dia @ 150 mm c/c.

    Page 2 of 4
    CONCRETE DESIGN OF SLOPED FOOTING 07/13/2020

    Page 3 of 4
    F1

    You might also like