Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 139 views

    Steel

    Uploaded by

    abdul khader
    The document contains calculations to check the design of hook supports for a lift shaft. It calculates that: 1) The weld strength between a UPN 50 x 500 beam and 20mm diameter rod is 245.68kN, which is greater than the required strength of 15kN. 2) The punching shear capacity of the 250mm thick concrete slab is 540.93kN, which is also greater than the required 15kN load. 3) Both the weld strength and punching shear capacity are determined to be safe based on the given load of 15kN.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Steel

    Uploaded by

    abdul khader
    139 views2 pages
    The document contains calculations to check the design of hook supports for a lift shaft. It calculates that: 1) The weld strength between a UPN 50 x 500 beam and 20mm diameter rod is 245.68kN, which is greater than the required strength of 15kN. 2) The punching shear capacity of the 250mm thick concrete slab is 540.93kN, which is also greater than the required 15kN load. 3) Both the weld strength and punching shear capacity are determined to be safe based on the given load of 15kN.

    Original Description:

    steel

    Original Title

    steel

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains calculations to check the design of hook supports for a lift shaft. It calculates that: 1) The weld strength between a UPN 50 x 500 beam and 20mm diameter rod is 245.68kN, which is greater than the required strength of 15kN. 2) The punching shear capacity of the 250mm thick concrete slab is 540.93kN, which is also greater than the required 15kN load. 3) Both the weld strength and punching shear capacity are determined to be safe based on the given load of 15kN.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    139 views2 pages

    Steel

    Uploaded by

    abdul khader
    The document contains calculations to check the design of hook supports for a lift shaft. It calculates that: 1) The weld strength between a UPN 50 x 500 beam and 20mm diameter rod is 245.68kN, which is greater than the required strength of 15kN. 2) The punching shear capacity of the 250mm thick concrete slab is 540.93kN, which is also greater than the required 15kN load. 3) Both the weld strength and punching shear capacity are determined to be safe based on the given load of 15kN.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 2

    DATE

    Aug-15
    Designed UMA
    LIFT SHAFT - HOOK SUPPORTS
    Checked GP
    REFERENCE CALCULATIONS OUTPUT

    Calculations for hook supports check:

    Design data:
    Force acting = 15 kN
    Thickness of roof slab, D = 250 mm
    Unit weight of water, ɣw = 9.81 kN/m3
    fc' = 25 N/mm2
    fy = 420 N/mm2
    Clear cover (C.C.) = 25 mm
    Diameter of bar = 12 mm
    Factor of safety, Φ = 0.75
    Length of the weld = 200 mm

    UPN 50 x 500

    100 100

    20 mm dia rod

    15 kN

    Weld strength:
    AISC-13th edition, ɸ Rn = ɸ Fw Aw
    Steel construction Nominal strength, Fw = 0.6 FEXX
    manual, FEXX (For E70 electrode weld) = 482.63 N/mm2
    Chapter - J.2.4 Effective area, Aw = 0.707 t le

    Considering 8 mm thick fillet weld


    ɸ Rn = ɸ Fw Aw
    =
    Err:511
    = 245.68 kN
    Therefore ɸ Rn = 245.68 kN > 7.5
    SAFE

    Punching shear:

    Channel section
    50
    mm
    Concrete slab

    500 mm

    Effective depth, d = 219 mm


    bo = 1976 mm

    Vc = (1/3) fc' bo d
    = 721.24

    ɸ Vc = 0.75x721.24
    Page 1 of 2
    DATE
    Aug-15
    Designed UMA
    LIFT SHAFT - HOOK SUPPORTS
    Checked GP
    REFERENCE CALCULATIONS OUTPUT
    = 540.93 kN > 15
    SAFE

    Page 2 of 2

    You might also like