FL Smidth PDF
FL Smidth PDF
FL Smidth PDF
18/12/01
8:49
Side 1
Barring device
Allows stopping the mill in any position
Facilitates mill servicing
Turns the mill at about 2% of normal speed
Saves starting and stopping the main motor
1712_M_FLS_BarringDevice
18/12/01
8:49
Side 2
BARRING DEVICE
Main features
Application
Sometimes it is necessary to rotate the mill
slowly and position it precisely. This may be
the case when recharging the mill, replacing
grinding media, inspecting the mill, fitting
new parts, etc. With this in mind, F.L.Smidth
has developed a special barring device that
is installed between the driving motor and
the Symetro gear unit.
The barring device turns the mill at about
2% of normal speed and the mill can be
stopped in any position. The barring device
operates quite independently of the main
driving motor and needs no extra space.
The F.L.Smidth barring device is available
not only for new installations, but also for
existing facilities which use a membrane
coupling.
Operating principle
The barring device is coupled to the
Symetro gear drive with a hand-operated
clutch. Electric interlocking of the clutch
engagement mechanism and the main circuit breaker ensures that the main motor
will not start as long as the barring device is
engaged.
The barring device consists of an electric
motor and a three-stage speed reducer of
1712_M_FLS_BarringDevice
18/12/01
8:49
Side 3
1.
2.
3.
4.
5.
Example
A mill with a power consumption of 2200
kW running at 16.5 rpm is to be provided
with a barring device.
Gear shaft
Motor shaft
Coupling with brake
Reversible barring motor
Handwheel for clutch
engagement mechanism
3
4
Specifications
Machine
Power
transmitted
RPM
Capacity
factor
Main motor
P1
n1
P1/n1
P1
n2
P1/n2
P2
n3
P2/n3
Barring device
P2
n4
P2/n4
P2/n4
1000T
2.2
1110T
3.4
1250T
4.9
1430T
7.5
1700T
12.7
n3/n4
76
88
99
127
120
Built-in length 1)
B mm
565
625
650
700
800
Built-in length 2)
B mm
500
500
500
tonnes
2.5
3.6
4.7
6.7
11.1
Weight, calculated
1712_M_FLS_BarringDevice
18/12/01
8:49
Side 4
Barring device,
disengaged
Clutch engagement
mechanism
MAAG Gear A/S production of high-quality gear units is certified to DS/EN ISO 9001.
www.flsmidth.com
Up-to-date addresses of worldwide
subsidiaries and sales offices are
available from our website
USA
INDIA
DENMARK
F.L.Smidth Inc.
2040 Avenue C
Bethlehem, PA 18017-2188
Tel: +1 610-264-6011
Tel: +1 800-523-9482
Fax: +1 610-264-6170
E-mail: info@flsmidth.com
F.L.Smidth A/S
Vigerslev All 77
DK-2500 Valby
Copenhagen
Tel: +45 36 18 10 00
Fax: +45 36 30 18 20
E-mail: info@flsmidth.com
Data in this brochure is intended for preliminary project planning only. Manufacturer reserves the right to modify equipment details and/or specifications without notice.