Group 5 Combined Operation: 1. Outline
Group 5 Combined Operation: 1. Outline
1. OUTLINE
ARM CYLINDER BOOM CYLINDER BUCKET CYLINDER
TRAVEL MOTOR
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
XAb2 XBk
BOOM2 BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
STRAIGHT
TRAVEL SPOOL dr2~dr8
Pz P1 PG Py
HYD
TANK
25073HC21
The oil from the front and rear pump flows through the neutral oil passage, bypass oil passage and
confluence oil passage in the main control valve. Then the oil goes to each actuator and operates
them. Check valves and orifices are located on these oil passage in the main control valve. These
control the oil from the main pumps so as to correspond to the operation of each actuator and
smooth the combined operation.
3 - 23
2. COMBINED SWING AND BOOM OPERATION
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
XAb2 XBk
BOOM2 BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
dr2~dr8
Pz P1 PG Py
HYD
TANK
25073CH22
When the swing and boom functions are operated, simultaneously the swing spool and boom spools
changed. The oil flows from the rear pump through boom1 section of the main control valve to boom
cylinders and the boom functions.
The oil flows from front pump through swing section to swing motor.
At the same time, the pressure in the boom circuits can be high while the swing pressure is low,
therefore the oil flows from front pump to boom cylinders through boom2 section via confluence
passage in case boom raise operation.
3 - 24
3. COMBINED SWING AND ARM OPERATION
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
XAb2 XBk
BOOM2 BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
dr2~dr8
Pz P1 PG Py
HYD
TANK
25073HC23
When the swing and arm functions are operated, simultaneously the swing spool and arm spools
changed. The oil flows from the front pump through arm1 and swing section of the main control valve
to arm cylinder and swing motor, and the arm and swing functions.
At the same time, the pressure in the arm circuit can be high while the swing pressure is low,
therefore the oil flows from rear pump to arm cylinder through arm2 section via confluence passage.
3 - 25
4. COMBINED SWING AND BUCKET OPERATION
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
XAb2 XBk
BOOM2 BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
dr2~dr8
Pz P1 PG Py
HYD
TANK
25073HC24
When the swing and bucket functions are operated, the swing and bucket spools changed. The oil
flows from the rear pump through the bucket section of the main control valve to the bucket cylinder
and the bucket functions. The oil flows from front pump through swing section of the main control
valve to the swing motor and swing the superstructure.
3 - 26
5. COMBINED SWING, BOOM, ARM AND BUCKET OPERATION
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
BOOM2
XAb2 XBk
BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
dr2~dr8
Pz P1 PG Py
HYD
TANK
25073HC25
When the swing, boom, arm and bucket functions are operated, the each spools of the main control
valve changed.
The oil flows from rear pump through arm2, boom1 and bucket section to boom, arm and bucket
cylinders. The oil flows from front pump through swing, boom2 and arm1 section to swing motor,
boom and arm cylinder. Then the functions to each actuators.
According to the state of each actuators functioning, the oil flows from front and rear pump through
the confluence oil passage to the each actuators.
3 - 27
6. COMBINED SWING AND TRAVEL OPERATION
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
XAb2 XBk
BOOM2 BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
STRAIGHT
TRAVEL SPOOL dr2~dr8
Pz P1 PG Py
HYD
TANK
25073HC26
When the swing and travel functions are operated, simultaneously the swing spool and travel spools
in the main control valve are moved to the functional position by the pilot oil pressure from the remote
control valve. At the same time, the straight travel spool is pushed to the left by the pilot oil pressure
from the pilot pump.
The oil from the front pump flows into the swing motor through the swing spool. The oil from the
rear pump flows into the travel motor through the RH travel spool of the right control valve and the LH
travel spool of the left control valve via the straight travel spool.
The superstructure swings and the machine travels straight.
3 - 28
7. COMBINED BOOM AND TRAVEL OPERATION
ARM CYLINDER BOOM CYLINDER BUCKET CYLINDER
TRAVEL MOTOR
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
XAb2 XBk
BOOM2 BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
STRAIGHT
TRAVEL SPOOL dr2~dr8
Pz P1 PG Py
HYD
TANK
25073HC27
When the boom and travel functions are operated, simultaneously the boom spools and travel spools
in the main control valve are moved to the functional position by the pilot oil pressure from the remote
control valve. At the same time, the straight travel spool is pushed to the left by the pilot oil pressure
from the pilot pump. The oil from the front pump flows into the boom cylinders through the boom 2
spool and boom 1 spool via the parallel and confluence passage in case boom up operation. The oil
from the rear pump flows into the travel motors through the RH travel spool of the right control valve
and the LH travel spool of the left control valve via the straight travel spool.
When the travel circuit pressure drops lower than boom pressure, as when traveling downhill, boom
priority and smoothness are maintained because of the orifice in the straight travel spool. Thus the
machine will continue to travel straight.
3 - 29
8. COMBINED ARM AND TRAVEL OPERATION
ARM CYLINDER BOOM CYLINDER BUCKET CYLINDER
TRAVEL MOTOR
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
XAb2 XBk
BOOM2 BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
STRAIGHT
TRAVEL SPOOL dr2~dr8
Pz P1 PG Py
HYD
TANK
25073HC28
When the arm and travel functions are operated, simultaneously the arm spools and travel spools in
the main control valve are moved to the functional position by the pilot oil pressure from the remote
control valve. At the same time, the straight travel spool is pushed to the left by the pilot oil pressure
from the pilot pump. The oil from the front pump flows into the arm cylinders through the arm 1 spool
and arm 2 spool via the parallel and confluence oil passage. The oil from the rear pump flows into
the travel motors through the RH travel spool of the right control valve and the LH travel spool of the
left control valve via the straight travel spool.
When the travel circuit pressure drops lower than arm pressure, as when traveling downhill, arm
priority and smoothness are maintained because of the orifice. Thus the machine will continue to
travel straight.
3 - 30
9. COMBINED BUCKET AND TRAVEL OPERATION
ARM CYLINDER BOOM CYLINDER BUCKET CYLINDER
TRAVEL MOTOR
(XBp2) PBP
Ck1
XBp1
PaL dr6 Fl Fr dr7
XAa2
XAa1
dr5
Aa1
Ba1 XBa2
XBa1 XAa2
ARM1 ARM2
XBa2
XAk
Ak1
SWING MOTOR
Bk1
XAb2 XBk
BOOM2 BUCKET
XBp1 Ck2
dr4
dr8
XBs PbL
As Pns XAb1
XAb2
SWING Ab1
Bs
XAs Bb1
XBb1
BOOM1
dr3
XBtl
Atl
Btl
XAtl
OPTION
TRAVEL(LH)
XAtr
Atr
TRAVEL(RH) Btr
XBtr
R1
P2 R2
PH
Px
STRAIGHT
TRAVEL SPOOL dr2~dr8
Pz P1 PG Py
HYD
TANK
25073HC29
When the bucket and travel functions are operated, simultaneously the bucket spool and travel
spools in the main control valve are moved to the functional position by the pilot oil pressure from the
remote control valve. At the same time, the straight travel spool is pushed to the left by the pilot oil
pressure from the pilot pump. The oil from the front pump flows into the bucket cylinder through the
bucket spool via the confluence oil passage. The oil from the rear pump flows into the travel motors
through the RH travel spool of the right control valve and the LH travel spool of the left control valve
via the straight travel spool of the control valve.
When the travel circuit pressure drops lower than bucket pressure, as when traveling downhill,
bucket priority and smoothness are maintained because of the orifice.
In either case, the machine will continue to travel straight.
3 - 31