SK330LC

WT 77,800 lb
HP 247 @ 2,200 RPM
BKT CAP .875 ~ 2.75 cu yd

Dynamic Acera Hydraulic Excavator

PRODUCTIVITY

CAB & CONTROLS

Large, Comfortable Cab
We’ve expanded the cab by 18%—making it the largest in the industry—to give the operator lots of elbowroom while
ensuring that each and every control is ergonomically positioned for maximum convenience and unrivaled productivity.
Our design specialists also increased the total cab glass surface area by 36% to make the operator feel
more connected with the world outside. A 2-speaker, AM/FM stereo radio, with operator pre-set station
selections, is standard. Viscous silicon-filled cab mounts help eliminate the shocks and vibrations that
can fatigue an operator and degrade his productivity over a long shift.
The climate-control air conditioning system can effortlessly generate an impressive 18,250 BTUs
(1.52 tons) of cool air in the summer or 20,200 BTUs of heat in the winter. Any time of the year, the
operator’s desired temperature can be rapidly reached and maintained.

Adjustability = Productivity
The adjustable, 7-position suspension seat lets any operator get completely comfortable regardless of
size or shape. You can even move the seat forward or backward completely independent of the control
lever consoles. We also designed an adjustable height feature into our pilot control levers. By adjusting
the lever height to three different heights, the operator doesn’t have to feel uncomfortable no matter if he
is short, average or tall.

Our NeuralNet Command System Reacts to the Operator

One of the most impressive innovations we have designed into the Dynamic Acera line is our NeuralNet
Command System. Its “fuzzy logic” software works much like the technology that makes advanced
military aircraft ultra-responsive to a pilot’s every wish: analyzing a simple hand movement and trans-
lating it into a series of coordinated control messages. All of which makes command automatic, intuitive
and extremely efficient.

Assist Mode
This mode leverages the “fuzzy logic” of our revolutionary NeuralNet Command System, available only on Dynamic
Acera excavators. During operation, constant engine RPM is maintained under varying load conditions for outstanding
production efficiency. It recognizes various tasks and automatically responds, assisting the operator by adjusting the
machine’s response to the job’s conditions. By eliminating the need for an operator to manually select from 6-10 indi-
vidual work mode options per task, the Assist Mode helps him concentrate on his job, instead of pushing buttons. That
leads to easier operation and more productivity — every task, every day.

A graphic display on the monitor

screen of the command module
OK displays system performance,
DIGGING LEVELING SCATTERING COMPACTING STANDBY confirming each work mode setting.
Manual Mode
This default mode maximizes output for the heavy operations that require the excavator’s full performance. It delivers the
highest possible level of production for truck loading, mass excavation or any task requiring continuous maximum speed
and power.

Breaker Mode
This new hydraulic setting lets operators quickly adjust the pump flow rates for various attachments, like breakers and
nibbler/breakers, right from the cab. When the breaker mode is set, the flow volume is automatically controlled by what-
ever setting the operator chooses. When it is not set, the flow volume defaults to the normal rate.

Intelligent Total Control System (ITCS)

Rapid responsiveness is designed into the SK330LC. Our ITCS software improves productivity while ensuring that every
part of this excavator feels like it is a natural extension of the operator: precise, productive and high performance.

2
 SK330LC

Auto-Acceleration System
This advanced system ever-so-smoothly eases engine RPMs from 1,000 RPM to full speed in direct, proportional response to the operator’s
control lever movements. The result: either a very deliberate acceleration for extremely precise operations, or an instant surge to full power.

Auto Warm-Up System

We installed an automatic warm-up system that cuts the time necessary for the engine and the hydraulic systems to reach their
optimum performance levels.

EXCEPTIONAL ENGINE

Rock-Solid Reliable, Mitsubishi Engine Meets "Tier 2" Emission Standards

We’ve chosen the rock-solid, reliable Mitsubishi 6D16-TLA2A engine to power the Dynamic Acera SK330LC. The mighty
Mitsubishi power plant generates 247 net horsepower, which is the industry's highest rating in this class. Since each
Kobelco dealer also offers certified Mitsubishi support, you enjoy one-stop repair and maintenance convenience that helps
you minimize downtime and keep your excavators on the job even longer. It’s this kind of performance that can give you a
competitive advantage over the long run. Each Mitsubishi engine comes with a tremendous support program:

• The base engine warranty, which includes parts, labor, and mileage, covers defects in materials and workmanship for
1 year/unlimited hours or 2 years/2,000 hours, whichever comes first.
• Standard, extended coverage for major components, 3 years/10,000 hours.
• Extended warranty protection can be purchased beyond the base warranty period in variable years and hours through
Kobelco’s Ultracare program.

SIMPLE SERVICING

Self-Diagnostic Capabilities and 60-Event Fault Code Memory

The best way to deal with problems is to avoid them, which is why we’ve built a self-diagnostic function into the computer system. It constantly
gathers and displays up to 68 different service items, to help ensure small problems don’t turn into big expenses. This even includes checking
hydraulic pressures conveniently from the operators cab.
We’ve eliminated the need to use tools, gauges or laptop computers to remotely retrieve data for recent system faults. Now up to 60 fault
codes, trouble locations and hours of each event are all accessible from the cab’s control console, reducing downtime and keeping your exca-
vator operating longer.

Friction-Inhibiting Bushings
Kobelco engineering has substantially increased both the durability and longevity of the SK330LC’s
boom foot and boom-hoist cylinders. Our design engineers came up with special, wear-resistant brass
bushings fortified with graphite inserts: a long-lasting solid lubricant that inhibits friction and, along with
your routine maintenance procedures, helps maximize the life of these critical components.

Easy-Maintenance Radiator
Now you can remove the radiator without having to drain the hydraulic system, thanks to a new design that makes the radiator and oil cooler
systems independent of each other. We’ve built in adequate space — about four inches — between the radiator and the oil cooler so it’s easy
to access either component for servicing. Or to just hose off any debris that has accumulated on the protective dust screen separating them.

3
PERFORMANCE

HYDRAULIC PERFORMANCE

The Industry’s Best Lift Capacity

Nothing in its class out lifts our SK330LC and we can prove it. We’ve increased the SK330LC’s stability, both over the
front and over the sides, making it rock solid. We even bolstered our upper revolving frame and undercarriage so they
could handle bigger loads. Should you need it, the Heavy Lift System can be switched on for an increased capacity at
close radius with no time limit. These increases give the SK330LC the ability to handle large pipe, trench boxes or your
most demanding jobs—without breaking a sweat.

The Industry’s Highest Breakout Forces

The SK330LC excavator boasts higher arm and bucket forces than comparably equipped competitor machines in the
same weight class. Furthermore, the operator can boost power by another 10% simply by pressing the Power Boost
button on the right-hand control lever, unleashing the industry’s highest breakout forces. Unlike competitive systems,
Dynamic Acera excavators are designed to operate at their highest power levels for as long as you need them to.
Bottom line: we give you all the power you need for as long as you need it.

Swing Priority
This exclusive system automatically and instantly delivers full swing power during combined swing/arm operations—
with no special switches to select—making quick work of jobs like side digging and backfilling.

Unique Travel System

The SK330LC’s travel motors give you a choice of a high-speed setting—at 3.6 mph (5.8 km/h), the world’s fastest for this
class—or a high torque setting—2.1 mph (3.4 km/h) for close-quarters movement. The drawbar pull has been increased
to 63,800 lbs. (284 kN): the highest in its class. When the operator selects Independent Travel, one pump becomes
dedicated to travel, ensuring a smooth constant propel speed without deviation during simultaneous travel/attachment
operations. Delicate operations like carrying a large pipe across the job site become simple because in Independent
Travel the operator can focus on the pipe without having to worry about his travel speed being affected.

Boom and Arm Holding Valves

Operators often have to hold pipe or other heavy objects stationary while other crew members complete their work. To
make sure these heavy loads don’t budge, we’ve engineered our boom and arm holding valves to minimize attachment
drift.

Standard Auxiliary Valve with Flow Control

Every excavator in the Dynamic Acera line features a standard auxiliary valve; which is part of an expandable main
control valve. The functionality of the SK330LC has been enhanced to include a standard one-way auxiliary valve,
making it easy to install piping and controls for auxiliary hydraulics. So, in a matter of hours, you’ll be ready to add
on your attachments.
The maximum flow available to the auxiliary attachment can be pre-set from inside the cab, so operators are less
likely to damage your excavator or attachment through over aggressive use.
Two bi-directional auxiliary hydraulic options are available:
• High-flow auxiliary valve is switchable between one-pump
flow and two-pump flow from the operators cab.
• Low-flow rotation system is independent flow source HYDRAULIC SYSTEM
for multi-functioning applications using attachments Pump 2 variable displacement
such as thumbs and twist buckets.
Max discharge flow 2 x 66.8 US gal/min (2 x 253 L/min)
Operating pressure:
Optional Implement 4,980 psi (34.3 MPa)
Bi-Directional
Travel 4,980 psi (34.3 MPa)
Valve
Swing 3,990 psi (27.5 MPa)
Standard
One-Way Power Boost/Heavy lift 5,470 psi (37.8 MPa)
Valve
Pilot control circuit 710 psi (4.9 MPa)
Control valves 6 spool
4
 SPECS SK330LC
�
�

�
�
�
� �
�
�
�
� �
� �

DIMENSIONS Unit ft-in (m)

ARM LENGTH 10' 10" (3.33) 13' 7" (4.15)
A Overall length 36' 9" (11.20) 36' 10" (11.23)
B Overall width (with 800mm shoe) 11' 2" (3.40) 11' 2" (3.40)
C Overall height (to top of boom) 11' 0" (3.36) 11' 8" (3.55)
D Basic machine length 19' 8" (5.99) 19' 8" (5.99)
E Overall height (to top of cab)* 10' 3" (3.12) 10' 3" (3.12)
F Ground clearance of rear end* 3' 11" (1.20) 3' 11" (1.20)
G Center distance of tumblers 13' 3" (4.05) 13' 3" (4.05)
H Overall length of crawler 16' 4" (4.98) 16' 4" (4.98)
I Crawler height at tumbler center* 3' 5" (1.05) 3' 5" (1.05)
J Track gauge 8' 6" (2.60) 8' 6" (2.60)
K Width of crawler shoe 31.5” (800 mm) 31.5” (800 mm)
L Ground clearance of undercarriage* 19.7” (500 mm) 19.7” (500 mm)
M Tail swing radius 11' 6" (3.50) 11' 6" (3.50)

*Excludes height of grouser bar.

WEIGHTS Bucket weight: 2,100 lbs (954 kg)

Shoe width in (mm) 27.6 (700) 31.5 (800)
Machine overall width ft-in (mm) 10' 10" (3.30) 11' 2" (3.40)
Ground pressure psi (kPa) 8.06 (55.5) 7.18 (49.5)
Operating weight lb (kg) 76,500 (34,700) 77,800 (35,300)

BUCKET SELECTION CHART

Bucket Duty Capacity (SAE) Width Bucket Arm ft-in (m)
Cubic Yard (m3) Inches (m) Weight lb (kg) 10'10"(3.3) 13'7"(4.15)
General Purpose .875 (.669) 24" (.609) 1,925 (873) H H
1.25 (.956) 30" (.762) 2,105 (955) H H
1.50 (1.146) 36" (.914) 2,365 (1,073) H M
1.75 (1.337) 42" (1.066) 2,550 (1,157) H L
2.0 (1.529) 48" (1.219) 2,700 (1,225) M X
2.375 (1.815) 54" (1.371) 3,825 (1,735) L X
2.75 (2.10) 54" (1.371) 4,050 (1,837) L X
Heavy Duty .875 (.669) 24" (.609) 2,070 (.939) H H
H - Used with material
1.25 (.956) 30" (.762) 2,265 (1,027) H H weight up to 3,000
1.50 (1.146) 36" (.914) 2,545 (1,154) H M lbs/cu yd (1,780 kg/m3)
M - Used with material
1.75 (1.337) 42" (1.066) 2,740 (1,243) M L weight up to 2,500
lbs/cu yd (1,483 kg/m3)
2.0 (1.529) 48" (1.219) 2,905 (1,318) L X L - Used with material
2.375 (1.815) 54" (1.371) 3,040 (1,379) L X weight up to 2,000
lbs/cu yd (1,186 kg/m3)
Severe Duty 1.00 (.764) 27" (.685) 2,330 (1,057) H H X - Not recommended
1.25 (.956) 33" (.762) 2,585 (1,172) H H
1.50 (1.146) 36" (.914) 2,690 (1,220) H M
1.75 (1.337) 42" (1.066) 2,945 (1,336) M L
2.0 (1.529) 48" (1.219) 3,160 (1,433) L X
5
 SPECS
A Reach swing centerline to bucket hook

B Bucket hook height above/below ground

C Lifting capacities in pounds and kilograms

• Max discharge pressure:

5,470 psi (385 kg/cm2)

• Track shoe: 31.5” (800 mm) Triple grouser

• Boom: 20’4” (6.2 m)

LIFTING CAPACITIES Shoe: 31.5" (800 mm) triple grouser

SK330LC Arm: 10' 10" (3.3 m) Bucket: 1.83 yd3 (1.4 m3) SAE heaped Bucket Weight: 2,290 lb (1,040 kg)
A 5' (1.5 m) 10' (3.0 m) 15' (4.6 m) 20' (6.1 m) 25' (7.6 m) 30' (9.1 m)
Over Over Over Over Over Over Over Over Over Over Over Over
B Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 C
25 *12,150 *12,150 lb
(7.6 m) *5,510 *5,510 kg
20 *14,950 *14.950 lb
(6.1 m) *6,780 *6,780 kg
15' *18,410 *18,410 *16,240 14,960 *12,140 10,820 lb
(4.6 m) *8,350 *8,350 *7,360 6,780 *5,500 4,910 kg
10' *34,440 *34,440 *29,190 *29,190 *21,720 20,260 *17,990 14,240 *15,880 10,480 lb
(3.0 m) *15,620 *15,620 *13,240 *13,240 *9,850 9,180 *8,160 6,460 *7,200 4,750 kg
5' *18,760 *18,760 *34,910 29,070 *24,840 18,980 *19,740 13,540 16,190 10,110 lb
(1.5 m) *8,500 *8,500 *15,830 13,180 *11,260 8,600 *8,950 6,140 7,340 4,580 kg
Ground *26,900 *26,900 *37,720 27,750 *26,940 18,090 *21,010 13,000 15,890 9,830 lb
Level *12,200 *12,200 *17,100 12,580 *12,210 8,200 *9,530 5,890 7,200 4,460 kg
-5' *27,670 *27,670 *38,180 *38,180 *37,850 27,330 *27,600 17,660 20,750 12,720 lb
(-1.5 m) *12,540 *12,540 *17,310 *17,310 *17,160 12,390 *12,520 8,010 9,410 5,760 kg
-10' *38,720 *38,720 *50,930 *50,930 *35,720 27,480 *26,560 17,650 *20,380 12,740 lb
(-3.0 m) *17,560 *17,560 *23,090 *23,090 *16,200 12,460 *12,040 8,000 *9,240 5,780 kg
-15' *42,710 *42,710 *30,910 28,120 *23,040 18,070 lb
(-4.6 m) *19,370 *19,370 *14,020 12,750 *10,450 8,190 kg
-20' *21,200 *21,200 lb
(-6.1 m) *9,610 *9,610 kg

LIFTING CAPACITIES Shoe: 31.5" (800 mm) triple grouser

SK330LC Arm: 13' 7" (4.15 m) Bucket: 1.57 yd3 (1.2 m3) SAE heaped Bucket Weight: 2,050 lb (930 kg)
A 5' (1.5 m) 10' (3.0 m) 15' (4.6 m) 20' (6.1 m) 25' (7.6 m) 30' (9.1 m)
Over Over Over Over Over Over Over Over Over Over Over Over
B Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 Front Side/3600 C
20 *10,690 *10,690 lb
(6.1 m) *4,840 *4,840 kg
15' *14,300 *14,300 *13,440 11,000 lb
(4.6 m) *6,480 *6,480 *6,090 4,990 kg
10' *38,750 *38,750 *24,820 *24,820 *19,190 *19,190 *16,220 14,450 *14,470 10,550 lb
(3.0 m) *17,570 *17,570 *11,250 *11,250 *8,700 *8,700 *7,350 6,550 *6,560 4,780 kg
5' *31,890 *31,890 *31,480 29,830 *22,710 19,260 *18,240 13,610 *15,610 10,080 lb
(1.5 m) *14,460 *14,460 *14,270 13,530 *10,300 8,730 *8,270 6,170 *7,080 4,570 kg
Ground *15,090 *15,090 *29,280 *29,280 *35,820 27,850 *25,460 18,090 *19,920 12,920 15,750 9,680 lb
Level *6,840 *6,840 *13,270 *13,270 *16,240 12,630 *11,550 8,200 *9,030 5,860 7,140 4,390 kg
-5' *23,490 *23,490 *35,490 *35,490 *37,450 26,930 *26,940 17,400 20,500 12,460 15,480 9,430 lb
(-1.5 m) *10,650 *10,650 *16,090 *16,090 *16,980 12,210 *12,210 7,890 9,290 5,650 7,020 4,270 kg
-10' *32,190 *32,190 *45,010 *45,010 *36,730 26,750 *26,890 17,160 20,320 12,300 lb
(-3.0 m) *14,600 *14,600 *20,410 *20,410 *16,660 12,130 *12,190 7,780 9,210 5,580 kg
-15' *41,930 *41,930 *48,520 *48,520 *33,600 27,120 *24,900 17,340 *18,810 12,500 lb
(-4.6 m) *19,010 *19,010 *22,000 *22,000 *15,240 12,300 *11,290 7,860 *8,530 5,660 kg
-20' *37,880 *37,880 *27,020 *27,020 *19,580 18,050 lb
(-6.1 m) *17,170 *17,170 *12,250 *12,250 *8,880 8,180 kg
Notes:
1. Do not attempt to lift or hold any load that exceeds these rated values at their specified load radii and heights. Weight of all accessories must be deducted from the above lifting capacities.
2. Lifting capacities assume a machine standing on a level, firm, and uniform supporting surface. Operator must make allowance for job conditions such as soft or uneven ground, out of level
conditions, side loads, sudden stopping of loads, hazardous conditions, inexperienced personnel, weight of various other buckets, lifting slings, attachments, etc.
3. Ratings at bucket lift hook.
4. The above rated loads are in compliance with SAE Hydraulic Excavator Lift Capacity Standard J 1097. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Rated
loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.
5. Operator should be fully acquainted with the Operator’s and Maintenance Manuals before operating this machine. Rules for safe operation of equipment should be followed at all times.
6. Capacities apply only to the machine as originally manufactured and normally equipped by KOBELCO Construction Machinery America LLC.

6
 SK330LC
WORKING RANGES Unit: ft-in (m)
Standard Arm Optional Arm
ATTACHMENTS
10' 10" (3.3) 13' 7" (4.15)
A Max digging reach 36' 10" (11.22) 39' 4" (11.98)
A1 Max digging reach at ground level 36' 2" (11.03) 38' 9" (11.80)
B Max digging depth 24' 7" (7.49) 27' 4" (8.34)
C Max digging height 34' 5" (10.49) 35' 3" (10.75)
D Max dumping clearance 23' 11" (7.29) 24' 10" (7.57)
E Min dumping clearance 8' 7" (2.62) 5' 10" (1.77)
F Max vertical wall digging depth 21' 7" (6.57) 23' 11" (7.29)
G Min front swing radius 14' 1" (4.29) 14' 4" (4.37)
H Height at min swing radius 28' 5" (8.65) 28' 5" (8.65)
I Digging depth for 8' (2.4m) flat bottom 24' 0" (7.31) 27' 1" (8.25)
J Horiz digging stroke at ground level 19' 0" (5.79) 24' 1" (7.34)

DIGGING FORCE Unit: lb (kg)

10' 10" (3.3 m) Arm 13' 7" (4.15 m) Arm
SAE ISO SAE ISO
Bucket digging force *48,900 (*22,181) *54,500 (*24,721) 44,500 (20,185) 49,600 (22,500)
Arm crowding force *39,500 (*17,920) *40,100 (*18,189) 30,700 (13,925) 31,160 (14,130)
This chart is a graphic representation of the working ranges for *Power boost engaged.
the SK330LC equipped with a 10’ 10” (3.3 m) arm.

REFILLING CAPACITIES Unit: US gal (liters)

PERFORMANCE Fuel tank 148 (560)
Travel speed 3.6/2.1 mph (5.8/3.4 km/h) Hydraulic oil reservoir 54.4 (206)
Swing speed 9.1 rpm Hydraulic system including oil reservoir 92.7 (351)
Gradeability 35˚ (70%) Cooling system 9.0 (34)
Drawbar pulling force 63,800 lbs (284 kN) Lubrication: Engine oil 7.4 (28)

SPECIFICATION SUMMARY
GENERAL Travel-psi (MPa) 4,980 (34.3)
Operating weight with Bucket lb (kg) 77,800 (35,290) Swing-psi (MPa) 3,980 (27.5)
Bucket Capacity Range cu yd (m3) .875-2.75 (.67-2.10) Heavy Lift-psi (MPa) 5,470 (37.8)
ENGINE UNDERCARRIAGE
Make and Model Mitsubishi 6D16-TLA2A Track Overall Length ft-in (m) 16' 4" (4.98)
Displacement cu in (L) 460 (7.545) Track Overall Width w/Std. Shoe ft-in (m) 11' 2" (3.40)
Bore and Stroke in (mm) 4.65"x4.53" (118 x 115) Track Shoe in (mm) 31.5" (800)
Horsepower SAE NET HP/RPM (KW/RPM) 247@2,200 (184@2,200) Travel Speed mph (km/h) 3.6/2.1 (5.8/3.4)
WORKING RANGES (Std. Arm) Draw Bar Pull lb (kg) 63,800 (28,940)
Standard Arm ft-in (m) 10' 10" (3.3) Ground Bearing Pressure psi (kg/cm2) 7.19 (2.51)
Bucket Digging Force lb (kg) 48,900 (22,180) Ground Clearance in (mm) 19.7" (500)
Arm Digging Force lb (kg) 39,500 (17,920) SWING
Ground Level Reach ft-in (m) 36' 2" (11.03) Swing Speed rpm 9.1
Max. Digging Depth ft-in (m) 24' 7" (7.49) Tail Swing Radius ft-in (m) 11' 6" (3.50)
Max. Dumping Height ft-in (m) 23' 11" (7.29) Swing Torque lb-ft (kN • m) 87,844 (119)
Max. Vertical Wall Digging Depth ft-in (m) 21' 7" (6.57) SHIPPING DIMENSIONS
Max. Lift Capacity-Side lb (kg) 13,000 (5,890) Height ft-in (m) 11' 0" (3.36)
@ 25’ Radius & Ground Level-Front lb (kg) 21,010 (9,530) Width w/Std. Shoe ft-in (m) 11' 2" (3.40)
HYDRAULIC SYSTEM Length ft-in (m) 36' 9" (11.20)
Hydraulic Pump No & type 2VP+1FG REFILL CAPACITIES
Rated Oil Flow gpm (L/m) 2x66.8+5.5 (2x253+21) Fuel Tank gal (L) 148 (560)
Operating Pressure Implement-psi (MPa) 4,980 (34.3) Hydraulic Reservoir gal (L) 54.4 (206)

7
 STANDARD EQUIPMENT
• AM/FM radio • Removable travel levers with toe tabs
• Arm: 10' 10" (3.3 m) with vertical ribbed rock guard and tapped • Self-lubricating bushings in boom foot and boom hoist cylinders
blocks for auxillary piping • Service diagnostics:
• Audible warning system for high coolant temperature, low engine Computer system displays 68 service items
oil pressure, clogged air filter and oil replacement interval 60 event fault code memory, accessible from cab
• Boom: 21' 4" (6.5 m) • Starting motor (24 v/5.0 KW) 35 amp alternator
• Boom and arm holding (anti-drift) valves • Straight travel system
• Breaker valve with flow control • Suspension seat–7-way adjustable
• Cab is die formed, modular steel, full-vision, sound insulated, • Swing and travel automatic parking brakes
with viscous silicon-filled mounts, windshield wiper, heater and • Swing flashers recessed into counterweight. Off/on switch
defroster, cigarette lighter, ashtray, floor mat, cab light, control located on multi-function console in cab
lever lock, tinted skylight with damper cylinder • Swing priority (trenching system) functions automatically
• Climate control air conditioning/heating system • Swing shockless valve
• Display monitor mounted on multi-function console provides • Track shoes: 31.5" (800 mm) semi-triple grouser
status of following: aging of engine oil, fuel and hydraulic filters, • Travel—two speed with automatic shift
system status, engine preheat, low engine oil pressure, engine • Two lever control for boom, arm, bucket and swing; pilot
coolant temperature, air cleaner restriction, battery charging, operated wrist controls and foot pedals
fuel level, CPU error and tachometer. Beneath monitor are • Warm up function of engine and hydraulic system functions
switches for auto-decel, windshield washer and wiper, mode automatically
selector and swing flashers • Work lights—three front and two rear
• Double pump flow for bucket in
• Dual element air cleaner
• Electric horn OPTIONAL EQUIPMENT
• Emergency electronic bypass
• Engine shuts down automatically for low oil pressure • Arm: 13' 7" (4.15 m) with rock guard
• Heavy duty batteries (2 x 12 volt 136 AH) • Belly pan guard
• Heavy Lift • Boom and arm load (lock) valves
• Hydraulic track adjusters • Combined one-way or two-way auxiliary hydraulic piping
• Independent travel (one or two pump) with hand or foot controls
• Lifetime lubricated track rollers, idlers and sprockets • Control pattern changer (ISO/BHL)
• Mitsubishi engine, model 6D16-TLA2A • Front rain visor
• Mode selection • High & wide lower
Manual Mode—full performance, default mode • Hydraulic oil for cold or tropical environments
Assist Mode—simplified and useful economy mode • Independent low-flow rotation system
Breaker Mode—electronic breaker flow control • Large selection of buckets
• Power Boost • Long reach attachment with heavier counterweight
• Power outlet, 24 volt to 12 volt converter • Mass Excavator attachment
• Proportional auto accel system • Single pedal travel
• Removable cleanout screen for radiator • Track shoe: 27.6" (700 mm) double
bar grouser
• Vandalism guards
NOTE: Due to our policy of continual product improve-
ment, all designs and specifications are subject to
change without advance notice.

Kobelco Construction Machinery America LLC

245 E. North Avenue
Carol Stream, IL 60188-2021
866-726-3396 Toll Free

SK330LC
630-260-4000
630-260-4304 Fax
E-mail: digin@kobelcoamericam.com
Website: www.kobelcoamerica.com

© 2003 Kobelco Construction Machinery America LLC Bulletin No. SK330LC-US-3/03-10M-SAM-104