OVERVIEW

GALILEO - BLOWROOM
OPENING SECTION
Marzoli
Complete spinning line,
components and digitalized
solutions for the best perfomance
of the spinning process

02
THE ONE SOURCE
FOR A FULLY-AUTOMATED
AND DIGITALIZED
SPINNING MILL

Marzoli, one of the major brands of the textile

sector worldwide, is a unique European manufacturer OVER
of the complete line of machines for the opening,
preparation and spinning of short-staple fiber.
160 YEARS
OF SUCCESSES

From the bale opener to the ring spinning frame,

Marzoli offers the most advanced technology OVER
for a completely-automated spinning mill.
Through its global sales and service network, 70 COUNTRIES
WITH ACTIVE CLIENTS
its expertise on each type of fiber and application
and the competence on the entire process, Marzoli
represents a competent and reliable partner. OPENING SECTION
And through its experience, know-how · Openers & Cleaners

and commitment, it provides its customers with: · Mixers & Blenders

· Card

· Advanced spinning solutions through a careful

activity of textile engineering. Marzoli assists
COMBING SECTION
its customers from the study of the spinning plan,
· Draw Frames
throughout sourcing, erection and commissioning,
· Lap Winder
up to maintenance of the resulting turnkey spinning · Comber
plant, which can comprise Marzoli but also third-party · Lap Transport
machinery. The customer can rely on the competence
and capability of a unique partner, responsible for
the quality and productivity of the entire spinning mill. SPINNING SECTION
· Roving Frame

· The advantages of smart spinning. No matter what · Ring Spinning Frame

· Bobbin Transport
the brand(s) of the machinery is, Marzoli can install
System
its software platforms, YarNet and MRM, its hardware
applications for gathering data on waste percentages
and its composition, quality values, productivity
indexes and other kpi data to let the customer build
on the potential of Industry 4.0, optimize the entire
spinning process through well-informed decisions and
reach the highest performance in production operations.

03
Marzoli

KEY POINTS

BLOWROOM LINE ·
·
EFFECTIVE OPENING
EXCELLENT CLEANING AND PERFECT BLENDING
· EFFICIENT DE-DUSTING
Fine & gentle opening of the feedstock · HIGH PRODUCTIVITY (UP TO 1,600 Kg/h)
· LOW FIBER STRESS
at high production · LOW AMOUNT OF GOOD FIBER IN THE WASTE

Although the productivity of Blowroom machinery has fibers, because of their breakage. Therefore, in order
increased steadily in the last decades, few innovations to preserve yarn quality spinners are often forced to increase
have revolutionized the concepts of blending, opening the amount of waste, with a negative impact on the final
and cleaning of the fiber. profit. Moreover, the installed power and the quantity
of air needed for cleaning and transporting the fibers
The opening of the fiber is still obtained through a strong are higher, and not always in proportion to the increased
impact between the feeding cylinder and the beater, production.
whose speeds ratio can be as high as 150/1. The higher
production in the blow room line, as well as in the cards, During the design of its opening line, Marzoli has introduced
has been achieved through higher speed of the beaters innovations to avoid the drawbacks listed above and
and more aggressive carding elements: grids have been consequently achieve the following objectives:
replaced by carding sectors with knives for the waste and · higher productivity;
beaters with saw tooth wires are now commonly utilized. · reduction of waste with the same quality level;
· reduction of energy consumption;
However, this entails drawbacks: it dramatically increases
· reduction of investment costs;
the stress on the fibers, often reducing their elasticity and
natural resistance, and creates greater amounts of short · reduction of managing costs.

04
 Galileo - Blowroom / Opening Section

These goals have been achieved thanks to: Marzoli blow room line outcomes
1. New concept of fiber treatment. A special accelerating · Excellent opening, cleaning and blending
cylinder between the feeding cylinders and the first performance.
beater has eliminated the violent action on the fiber, · Gentle treatment of the fibers to enhance yarn
replacing it with a more controlled and progressive quality (avoid damages, reduce the number of short
one that allows to: fibers and neps) and reduce the amount of good
· increase the production of the machines and of the fibers in the waste.
line without affecting the natural features of the fiber; · High productivity: a single machine can reach
· reduce the stress on the fibers; production levels up to 1,600 kg/h.
· prevent fiber breakages; · Efficient de-dusting.
· enhance quality of the final yarn;
· feed the opening beater with open flocks, favoring Marzoli Blow room line features
trash elimination. · Marzoli Blowroom line allows to process
2. Greater carding area & number of feeding chambers. all short-staple fibers:
Greater carding and de-dusting areas entail more - all types of cotton;
efficient and effective cleaning. - man-made and synthetic fibers;
A higher number of feeding chambers grants: - technical fibers;
· better blending; - short wool;
· the reduction of material being processed - gin motes.
by each cylinder, making opening more effective. · The modular design of the machines allows
to reduce the cost of the complete line.
In conclusion, with Marzoli’s innovations, spinners
· All working parameters are set through electronic
can increase production while keeping the same quality
panels located on the machines.
level and gain significant economic benefits especially
· Easy cleaning and maintenance thanks to optimal
in the cost of raw material, thanks to the reduced
accessibility of working organs.
amount of good fibers being discarded. As cotton prices
· All machines are equipped with Marzoli
are likely to grow in the future, these economic benefits
Green Technology.
will become even greater. Moreover, the great uncertainty
surrounding cotton price makes the reduction of the
wastage of raw material one of the best risk management
activities for spinners.

05
Marzoli

SUPERBLENDER B12 KEY POINTS

· 2 BEATERS AND 2 CONVEYING ROLLERS FOR FINE
OPENING OF THE RAW MATERIAL
Fine raw material plucking · MINIMUM STRESS OR CURLING OF FIBERS
· PRODUCTION UP TO 1,600 kg/h
· SETTABLE FOR TWO ASSORTMENTS

Superblender B12 outcomes:

· Very small flocks thanks to 2 beaters, each · production capacity with one assortment and working
with 254 tips, and to 2 moveable conveying rollers width of the detacher of 2,250 mm of 1,600 kg/h
that control the material during plucking; (depending on the processed fiber);
· smooth and continuos material plucking · suction from downstream cage condenser
all the way down to the floor thanks to the free to avoid the formation helicoidal air flows within
and upright movement of the detacher and the transportation tubes and consequently neps
to the moveable conveying rollers; formation.
· high reliability and safety;

TECHNICAL DESCRIPTION - LEGEND

Photocell

Photocell activated, detacher

stops and moves upwards
1.750

Max height
1,250
1,000

A B C D A B C D

06
 Galileo - Blowroom / Opening Section

Automatic production adjustment

Vertically-movable grid with linear transducers
to control tips penetration inside the bales
and therefore adjust the amount of throughput
(kg/h) according to:
· the height of the bales, so that all bales are
leveled at the same height;
4
· the amount of material inside the mixer: 1

a pressure switch, located on the mixer, acts 3

directly on the B12 grid to increase its production 7

when the material inside the mixer goes down,

6
and vice versa.
2

MACHINE DESCRIPTION - LEGEND 8

1 Control panel 6 Two plucking rolls
2 Bale lay-down area 7 Two vertically-moving
5
3 Detacher (1,700 mm or 2,250 mm) conveying rollers
4 Automatic rotating tower 8 Conveying winding roller
5 Duct for material transportation

TECHNICAL DATA Minimum

Minimum
distance
distance
from the
from
wall
the wall
to consent
to consent
the rotation
the rotation
6,365 70 Minimum distance
from the wall to consent the rotation
3,182

Ø 350
3,072

3,072
1,750

2,485 ML 3,250
920 1,700 / 2,250
E

B12
Processed raw material Cotton, man-made fibers up to 65 mm (2 1/2”)
B12 - 1,700 mm up to 1,100 kg/h | B12 - 2,250 mm up to 1,600 kg/h
One assortment
Production depending on the processed fibers
B12 - 1,700 mm up to 800 kg/h | B12 - 2,250 mm up to 1,100 kg/h
Two assortments
Production depending on the processed fibers

Installed power B12 - 1,700 mm 7.92 total kW | B12 - 2,250 mm 9.92 total kW

Space available for bales ML= E - 5,735 mm

· wide carriage (ML/B) x 1.5 or (ML/L) x 3
No. of bales each side for one assortment
· small carriage (ML/B) or (ML/L) x 2
(according to bales dimensions):
ML= space available for bales B= bale width L= bale lenght

Duct length E 11.13 - 46.13 m in steps of 2.5 m

Net weigth B12 - 1,700 mm 3,500 kg | B12 - 2,250 mm 3,700 kg Approx. 90 kg/m (for variable longitudinal parts)

Power Consumption to process 100 kg of raw material 0.68 kW

07
Marzoli

DUOCLEANER B390L KEY POINTS

· PROGRESSIVE OPENING AND EXCELLENT CLEANING
· GREAT PRODUCTIVITY (1,600 Kg/h)
Excellent cleaning at twice · LOW FIBER STRESS
· NO NEPS FORMATION
the production rate · EFFICIENT DEDUSTING

The B390L Duocleaner is a very efficient cleaner

that can reach 1,600 kg/h while granting outstanding
quality standards thanks to its innovative working
concept. The material enters at the center
of the first beater and it is split into two flows that
are processed separately by the two halves of the
two beaters. Each flow of material , thanks to special
deviators, rotates four times around the first semi-beater
and another four times around the second semi-beater.
The two flows of material then rejoin at the center
of the second beater. The B390L Duocleaner allows
to achieve outstanding cleaning and productivity
outcomes because:
· The material is split into two flows which entails
that each section of the two beaters process
a relatively small amount of material in the time unit.
· The material makes eight turns around the beaters
which is the highest number among competitor openers.
· The first and the second beater have different point
densities, different speeds and different settings
of the grids. This entails a progressive opening Low fiber stress
action for a more gentle treatment of the fibers Excellent cleaning is possible only after effective
and a thorough cleaning activity. opening: the Superblender provides the mini tufts;
the Duocleaner removes trash particles, fiber fragments
Machine features and dust. Since the Duocleaner has no nipping point,
· Production up to 1,600 Kg/h depending low fiber stress and no neps formation are achieved.
on the processed fiber;
Optimized cleaning
· beaters with different rotating speeds and tips
numbers (faster and more populated the second one); The waste accumulated after the four grids is transferred
through the two bucket wheel locks to a continuous
· independent speed setting of the beaters;
centralized suction system.
· grids with a different number of segments with
a total area of 2.24 m2;
Efficient dedusting
· independent setting of the four grids;
Dust causes many problems in the spinning mill.
· total dedusting area of 1.6 m2; The B450L, placed on the top of B390L, efficiently
· two different waste chambers; dedusts all the flocks coming from the bale plucker,
· working width of 1,600 mm for each beater thanks to its suction system.

08
 Galileo - Blowroom / Opening Section

Raw material flow

2 2

3 3 MACHINE DESCRIPTION - LEGEND

1 Dust Separator B450L
2 Double cleaning rolls
4 4 3 Indipendent adjustable grid
4 Bucket wheel lock
1.200 1.250 5 Control Panel
4.050

1.200 1.250
250
30
0
4.050

TECHNICAL DATA
250
30
0
2.050

1,200 1,250
2.050

2,225

250
30
2.225 0
4,050

2,150

2.225
2,050
2.150
2.150

B390L
Cotton, cotton waste, gin motes and blends up to 65 mm length
Processed raw material
Production up to 1,600 kg/h depending on the processed raw material

Installed power 12.25 kW

Working width 1,600 + 1,600 mm

Cleaning rolls 700 mm dia.

Speed range Cleaning roll in 400 - 600 rpm | Cleaning roll out 600 - 900 rpm

Net weight B390L 3,400 kg | B450L 1,000 kg

Power Consumption to process 100 kg of raw material 0.76 kW

09
Marzoli

AUTOMIXER B143L KEY POINTS

· TOP BLENDING PERFORMANCES AND ABSOLUTE RELIABILITY
· HIGH PRODUCTIVITY (1,600 Kg/h)
Technology for effective blending · NO NEPS FORMATION
· EXCELLENT DE-DUSTING
and dedusting at high production levels · LOW ENERGY CONSUMPTION

An effective blending of cottons, ensures greater Soft treatment of the fibers

uniformity and stability of the blend, thus improving The innovative design of the transport fan allows
its performance and its commercial assessment. to keep neps formation in the raw material to
a minimum.
The B143L with 4 or 8 blending chambers and working
width of 1,600 mm, has been designed in order
to achieve the following objectives:
· Top blending performances;
· production up to 1,600 kg/h; 5 3

· absolute reliability; 4

· low maintenance; 2
2
· dedusting area of 10 m (for the 8 chambers model).
6
10
Reliable performance
1
A smooth air stream delivers the fiber tufts to the
9
blending chambers where the material is pneumatically
8 7
compacted. A pair of grooved delivery rolls and an
opening roll for each blending chamber open the raw
MACHINE DESCRIPTION - LEGEND
material which is then mixed in the blending channel 1 Motorfan B152 6 Delivery rolls
2 Feed duct 7 Opening rolls
and sucked by the air stream of the cage condenser 3 Distributing duct 8 Blending channel
4 Blending chambers 9 Air by-pass
or the fan of the opener placed after the Automixer. 5 Pressure transducer 10 Microprocessor

10
 Galileo - Blowroom / Opening Section

Design of the feeding hood

The particular design of the feeding hood allows
a homogeneous distribution of the fibers among
the cells of the mixer.

Large capacity
The design of the blending chambers of the B143L
automixer allows production levels up to 1600 Kg/h,
depending on the type of material.

De-dusting surface
Low power consumption
The large de-dusting surface of Automixer B143L
allows an excellent removal of the dust from Despite its high production capacity, the B143L
the raw material even when working at high automixer has outstandingly low installed-power
production volumes. and energy-consumption levels.

TECHNICAL DATA

4,000
4,000

4,175 6,175
2,200

2,200
1,600

1,600

B143L
Cotton, man-made fibres and blends up to 65 mm length
Processed material
Production up to 1,600 kg/h with 8 chambers depending on the processed raw material
Storing capacity 550 kg cotton fibers (8 chambers) | 450 kg man made fibers (8 chambers)
Installed power including B152 11.2 kW (4 chambers) | 11.4 kW (8 chambers)
Working width 1,600 mm
Net weight 4,000 kg (4 chambers) | 5,200 kg (8 chambers)

Power Consumption to process 100 kg of raw material 0.71 kW

11
Marzoli

DUST SEPARATOR B450L

KEY POINTS

Effective and efficient dedusting · HIGH DEDUSTING SURFACE

· NO NEPS CREATION
· PRODUCTION ABOVE 1,600 kg/h

A smart and efficient solution to clean the raw material

from dust, pepper trash and micro fibers is the innovative
B450L. The tufts of raw material, coming from the B12,
go through the B450L’s conveyor and hit its perforated
cylinder. The design of the conveyor and the large
working width of the perforated cylinder ensure
a strong impact of the tufts against the cylinder while
the optimized air flow for fiber transportation ensures
low power consumption. The perforated cylinder is
sucked from both sides through an integrated motor fan.
This ensures that the tufts are better distributed on the
cylinder and better cleaned. The cylinder rotates and
delivers the dedusted tufts to a detaching roller which
collects them and makes them fall into the duct.
The B450 constitutes a smart solution also because it
does not curl or damage the fibers in any way.

1
2 MACHINE DESCRIPTION - LEGEND
1 Conveyor
3 2 Feeding box
6 3 Perforated cylinder
4 Detaching roller
4
5 Material delivery
6 Motor fan
5

TECHNICAL DATA

B450L
Cotton, man-made fibers and blends
Processed material up to 65 mm - Production up to 1,600 kg/h
depending on the processed raw material

0.75 kW machine main motor

Installed power Two options for the motorfan:
7.5 kW - 11 kW
1,250

Working width 1,250 mm

Air capacity from 3,500 to 7,500 m3/h
1,250 1,100
Power Consumption
2,150 to process 100 kg
from 0.39 up to 0.73 kW
of raw material,
included motorfan

12
 Galileo - Blowroom / Opening Section

DUO BLENDED CLEANER B380L KEY POINTS

· GENTLE BUT INTENSIVE OPENING
· EXCELLENT CLEANING, WASTE REDUCTION AND HIGH FLEXIBILITY
Technology for a gentle but intensive · EFFICIENT DEDUSTING AND EFFECTIVE BLENDING
· EASY MAINTENANCE & CLEANING
opening and cleaning action · PRODUCTION UP TO 1,000 Kg/h

Gentle but intensive opening

The B380L duo blended cleaner allows to open
and clean the raw material in a gentle but intensive
way while working at high production levels.
This is possible thanks to the progressive opening
and carding action, which reduces the stress
on the fibers without affecting the opening
and cleaning outcome.
Fibers in the B380L are freely delivered
to the first beater without being held by the nipping
mechanism that traditionally occurs between
the feeding roller and the feeding table.
The special pre-opening rolls reduce the fiber stress
caused by the speed difference between the feeding
roller and the beater.
The two beaters, with different pins densities,
rotate at different speeds in order to further open
the material but always with low stress on the fibers.

EXCELLENT CLEANING

The independent speed of the two beaters, controlled

by inverter, can be set by keyboard, according to the processed
raw material. The quality and quantity of the waste can be
easily modified with a simple setting of the deflector blades.

WASTE REDUCTION

The progressive opening and carding action improves

the selection of the fibers, thereby reducing
the amount of waste with the same cleaning efficiency
of the raw material.

13
Marzoli

3
5 4

6
7
8
10
1

MACHINE DESCRIPTION - LEGEND

1 Motorfan B152
2 Feed duct
3 Distributing duct
4 Blending chambers
5 Pressure transducer
6 Delivery rolls
7 Preopening rolls
8 Beaters KNIVES
9 Opening grids
DEFLECTORS
10 Microprocessor
SEGMENTS

High flexibility
The customer can choose between several types before it enters into the machine. The trash particles
of beaters (pinned, needle and sawtooth) according and dust, removed during the opening action,
to the fiber to process. are conveyed by the suction hoods to the client’s
Moreover, the hoods with knives, the flaps and the centralized suction system. Permanent suction
suction pipes of the B380L duo blended cleaner can considerably improves dedusting of cotton.
be opened in order to guarantee the highest level
Effective blending
of accessibility of the machine and to allow a fast
replacement of the beaters. This allows the customer The B380L, through its two separated blending
to process several types of materials with the same chambers, mixes the raw material. In blow room
machine always with the highest performances. lines with one or more fine openers, the blending
Moreover, in blow room lines with several opening action of the B380L adds up to the blending capacity
and cleaning points, it is possible to use only B380L of the mixer and allows to obtain perfect blends.
with different configurations, instead of various types
Easy cleaning & maintenance
of machines. This reduces the number of necessary
spare parts, with a great economic advantage The B380L geometry guarantees the maximum

for the customer. accessibility to all the working organs. This makes
cleaning and maintenance easy and effective,
Efficient dedusting allowing the machine to always work at its best.
The B380L, thanks to its two blending chambers
with a surface of 3 sqm, dedusts the processed material

14
 Galileo - Blowroom / Opening Section

TECHNICAL DATA
4,050

Ø 300
1,800

2,300
1,250

5,794
1,625 2,000

B380L
Processed material Cotton, man-made fibers and blends up to 1,000 kg/h depending on the processed material
Installed power 16.62 kW
Frame width 1,600 mm
Opening roll 400 mm dia.
Speed range 600 - 1,100 rpm
Net weight 4,340 kg

Power Consumption to process 100 kg of raw material 1.62 kW

15
Marzoli

B13 AND B23 TUFT KEY POINTS

· PERFECT TUFT BLENDING

BLENDING INSTALLATION ·
·
HIGH WEIGHING ACCURACY
HIGH PRODUCTIONS
· SELF CALIBRATION OF THE BALANCES
The quality of blending · UP TO 5 COMPONENTS IN THE BLEND
· PERFECT SOLUTION FOR FLEXIBLE
is far better than other systems PRODUCTION PROGRAMS

An effective solution for tuft blending is the

combination of two or more B13 weighing bale
openers and one B23 tuft blender.
Thanks to the optimum weighing precision and self-
calibration of the weighing pan this solution ensures
perfect blends. The operator, through a display presets
the target weights for each B13 in order to achieve
the desired tuft blend. Once production has begun, High weighing accuracy
each B13 works until it reaches its target weight
The B13 weighing bale opener fills up at high speed
and then it stops. Once all B13 stop, they discharge
and then reduces the speed as it approaches the
the processed material which falls on the conveyor
pre-set target weight. Thanks to this system, the B13
belt of the B23, placed underneath. After all the B13
weighing bale opener achieves the maximum
have discharged, the conveyor belt of the B23 moves
weighing accuracy, with an average weighing
and carries each layer of material under the next B13;
discrepancy of less than 1%.
then it stops and awaits the B13 to discharge again.
The weighing accuracy is not affected by variations
Through this process the first B13 creates the first
in density, volume or type of fiber being processed.
layer on the conveyor belt; the second B13 creates
the second layer which lies on the first one and so on. High production
Once the last layer is created,the conveyor belt Thanks to the large capacity of the weigh-pans,
of the B23 carries the two (or more) layers to the the B13 weighing bale opener allows to reduce
pressure table and the pincer roll. The layers are then the number of weighing operations. The abundant
opened through an opening roll and sent through material reserve reduces machine downtimes.
a duct to the mixer. All this guarantees excellent productivity.

USER-FRIENDLY INTERFACE

Simple operations and monitoring

· The microcomputer controls and guides
the operator with simple messages;
· the microcomputer identifies malfunctions
and suggests remedies;
· working programs can be stored and repeated;
· the display shows target and actual weights,
cv values, production rates of shifts;
· automatic actual weight correction.

16
 Galileo - Blowroom / Opening Section

5 MACHINE DESCRIPTION - LEGEND

10 1 Feed conveyor
2 Feed conveyor photocell
9 3 Retaining roll
11
4 Feed lattice
5 Cage Condenser
6 6 Material reserve trunk
7 Photocell
12 8 Delivery rolls
7 9 Roll clearer
13 10 Spiked lattice
11 Evener roll
8 14 12 Stripper roll
13 Closing flaps
3 15 14 Weight pan
2 15 Bottom traps
4 16 Tuft blender B23
1
16

TUFT BLENDING INSTALLATION FOR ALL NATURAL AND MAN-MADE FIBERS

The B13 Weighing Bale Opener

· Automatic calculation of the production · frame width: 1,200 mm;
and of the weights; · the B13 Weighing Bale Opener can be fed manually
· every 50 weighings (the number of weighings is and is therefore suitable for processing small lots.
settable) the CV calculation is automatically activated The length of the feed table can be adapted
(CV%). The machine automatically adjusts the setting to the space available;
when the CV is beyond the preset tolerance value; · the B13 Weighing Bale Opener can be fed also
· automatic control of the turbolences produced automatically (through the B450L Cage Condenser)
by the fall of the material on the balance; and is therefore also suitable for processing large lots;
· possibility to operate continuously with open balance; · consequently the B13 is the ideal solution for highly
· possibility to choose up to 10 working programs; flexible installations which can be used to process
· possibility to automatically set the machine production large lots as well as occasional small lots;
with the evener roll; · indirect discharge of the tufts into the weigh pan
· automatic emptying of the B13 + B23 systems; avoids weighing mistakes.

TECHNICAL DATA
4,316

3,066

1,693

mt. 2-4-6-8-10 4,724

B13
Processed material Cotton, man-made fibers and blends up to 350 kg/h Production depending on the processed fiber
Installed power 4.43 kW excluding B450
Weigth 4,100 kg excluding feeding lattice

Power Consumption to process 100 kg of raw material 1.26 kW

17
Marzoli

TUFT BLENDER B23

Up to 5 components can
be weighed for precise blends

B23 Tuft blender with one delivery

1
· Maximum production up to 1,000 kg/h with
6
a frame width of 1,000 mm;
7
· The B23 Tuft Blender can be fed by up to five B13
weighing bale openers. The weighing feeders
discharge the material on the conveyor belt
of the tuft blender; the different blend components
are placed on top of each other in layers.

8 3
MACHINE DESCRIPTION - LEGEND
4 5
1 B13 Weighing Bale Opener 5 Pressure roll
2 B23 Tuft Blender 6 Pressure table
2
3 Blending table 7 Pincer roll
4 Conveyor belt 8 Opening roll

18
 Galileo - Blowroom / Opening Section

B23 TUFT BLENDER WITH TWO DELIVERIES

· The B23 with two deliveries with an additional (A and B) while line 2 includes the other three
B13 feeder (c) is the ideal solution for a better (C, D and E).
flexibility of the installation and for plants where · In this case the minimum gauge (S) between
blends frequently change. the B13 feeders is 4,200 mm and the maximum
· Line 1 can comprise three feeders (A, B and C) gauge (S) is 5,400 mm;
while line 2 includes the other two (D and E). · the 3,000 mm gauge (S) is not available.
Alternatively Line 1 can comprise two feeders

1 A B C D E 2

S S S S

1 Line 1
2 Line 2

TECHNICAL DATA

Ø 300
1,405

1,453
1,094
1,007

L 1,900 S 1,500 2,000

B23 Gauge S 3,000 4,200 5,400

Cotton, man-made fibers and blends up to 1.000kg/h

Processed material N° B13 L L L
Production depending on the processed fiber
2 8,400 9,600 10,800
Installed power 2.75 kW
Weigth From 2,210 kg to 4,110 kg according to the width 3 11,400 13,800 16,200

4 14,400 18,000 21,600

Power Consumption
0.27 kW
to process 100 kg of raw material 5 17,400 22,200 27,000

19
Marzoli

BALE OPENER B14 & PREMIXER KEY POINTS

· PERFECT OPENING
· EFFECTIVE BLENDING
State-of-the-art opening technology · PRODUCTION UP TO 600 kg/h
· IDEAL COMPROMISE BETWEEN PRODUCTION,
for smaller productions COSTS AND SPACE NEEDED

· Suitable for processing cotton and man-made

fibers up to 65 mm (2 1/2”) staple length;
· frame width: 1,200 mm;
· production: up to 600 kg/h with manual feeding;
· the length of the feed table can be adapted
to the space available;
· it is advisable, from an economic point of view, to use
the B14 bale opener and premixer when processing
very small lots or when little space is available;
· the B14, in the version for cotton, is equipped
with 11 adjustable knives grid and suction unit
to eliminate the trash.
4

MACHINE DESCRIPTION - LEGEND 5 8

1 Feed conveyor 10
2 Feed conveyor photocell
11
3 Feed lattice
4 Cage condenser 6 9
5 Material reserve trunk
6 Photocell 7
7 Delivery rolls 2
8 Roll clearer 1
9 Spiked lattice 3
10 Evener roll
11 Stripper roll

TECHNICAL DATA
4,316

1,693
3,066

mt. 2-4-6-8-10 4,724

B14
Cotton, man-made fibers and blends up to 600 kg/h.
Processed material
Production depending on the processed fiber
Installed power 4.43 kW excluding B450L
Weigth 4,000 kg excluding B450L

Power Consumption to process 100 kg of raw material 0.44 kW

20
 Galileo - Blowroom / Opening Section

BLENDING FEEDER B15 KEY POINTS

· PERFECT SOLUTION FOR RECOVERED
FIBERS & SMALL LOTS
The perfect feeder of recovered-fibers · LOW INVESTMENT COST
· HIGH EFFICIENCY
and small amounts of raw material · PRODUCTION UP TO 300 Kg/h

· The B15 blending feeder is the ideal solution

to recover the good fiber that was discarded
in downstream processes and to process little
amounts of raw material.
· High flexibility: easy to change from one material
to another.
· Production up to 300 kg/h as raw material feeder,
80 kg/h as recovered fiber feeder.
· Feed conveyor from 2 to 10 meters.

8
6

7
MACHINE DESCRIPTION - LEGEND 4
1 Feed conveyor 3
2 Feed conveyor photocell
2
3 Feed lattice
4 Photocell 1
5 Spiked lattice 5
6 Evener roll
7 Stripper roll
8 Detaching roll

TECHNICAL DATA
2,300

1,100

1,493

mt.2-4-6-8-10 3,900

B15
Cotton, man-made fibers and blends up to 300 kg/h.
Processed material
Production depending on the processed fiber
Installed power 3.12 kW
Weigth 2,500 kg

Power Consumption to process 100 kg of raw material 0.91 kW

21
Marzoli

FEEDER B15 & OPENER B18

KEY POINTS

The best combination of feeder · HIGH INVESTMENT SAVINGS

· EFFECTIVE OPENING
& opener for small lines · GREAT EFFICIENCY

· Suitable to process cotton, man-made fibers

and blends up to 65 mm (2 1/2”) staple length;
· frame width: 1,000 mm;
· production up to 300 kg/h;
· The combination of the B15 feeder with the B18
opener constitutes a valuable and efficient
solution to process man-made fibers and feed
one or two cards simultaneously.

MACHINE DESCRIPTION - LEGEND

1 B15 Blending feeder 2
2 B18 Opener

TECHNICAL DATA
2,300

1,493
1,100

mt. 2-4-6-8-10 3,900

B15 - B18
Cotton, man-made fibers and blends up to 300 kg/h.
Processed material
Production depending on the processed fiber
Installed power 4.99 kW
bale opener B15 3.12 kW
Opener B18 1.87 kW
Weigth B18 620 kg

Power Consumption to process 100 kg of raw material 1.66 kW

22
 Galileo - Blowroom / Opening Section

OPENER FOR MAN-MADE

FIBERS B134L
KEY POINTS

Efficient opener with throughput · PRODUCTION UP TO 1,600 Kg/h

· LOW INVESTMENT & PRODUCTION COSTS
up to 1,600 kg/h · HIGH FLEXIBILITY

· Suitable to process cotton, man-made

fibers and blends up to 65 mm (2 1/2”) 1
staple length;
· frame width: 1,600 mm;
· production: up to 1,600 kg/h;
· excellent approachability.
6 2

High flexibility 3

The B134L flexibility is obtained thanks

to three interchangeable opening rolls: 4

· opening roll with 10,240 pins; 5

· opening roll with 14,880 needles;

· opening roll with sawtooth.
MACHINE DESCRIPTION - LEGEND
The opening roll is chosen according
1 Cage Condenser B450L
to the working material and the position 2 Photocells
3 Chute feed
of the machine in the process. 4 Feed rolls
5 Opening roll
6 Electronic Control Panel

TECHNICAL DATA

Ø 320
4,050

2,150

1,250 648

B134L
Cotton, man-made fibers and blends up to 65mm.
Processed material
Production up to 1,600 kg/h depending on the processed fibers
Installed power 4.18 kW
Frame widht 1,600 mm
Weigth 3,400 kg

Power Consumption to process 100 kg of raw material 0.26 kW

23
Marzoli

CONTROL FEED & B153L KEY POINTS

· HIGH INVESTMENT SAVINGS
· EFFECTIVE OPENING
Card feeding system · GREAT EFFICIENCY

The card feeding system is composed by a B450L

dust separator and a B153L motor fan.
This system ensures constant and homogeneous
feed to the cards.
· Cotton, man-made fibers and blends
up to 65 mm (2 1/2”) staple length;
· the controlled feed system is also
adaptable to any other card.

MACHINE DESCRIPTION - LEGEND

1 Motorfan B152
2 Fine opener B380L or B134L
3 Dust separator B450L
4 Fan B153L
5 Pressure transducer
6 Control unit
7 Control feed duct
8 Chute feed C701

1
2
5 3
4
6 8
7

Motorfan B153L
Cotton, man-made fibers and blends up to 800 kg/h.
Processed material
Production depending on the processed fibers

Installed power 4 kW

Fan diameter 425 mm

Fan speed 1,200 - 2,400 rpm

Air flow Maximum 4,000 m3/h

Weigth 100 kg

24
 Galileo - Blowroom / Opening Section

SOFTWARE PLATFORMS KEY POINTS

· EASY & FAST CONTROL OF EVERY STAGE
OF THE SPINNING PROCESS
· IMPROVED SPEED OF RESPONSE IN PRODUCTION OPERATIONS
· EASY MANAGEMENT OF PRODUCTION RECIPES
· SUPERIOR, EASIER AND FASTER MAINTENANCE

END2END PRODUCTION MANAGEMENT

PLATFORM: YARNET
YarNet is Marzoli production management software.
It enables the monitoring of production levels, efficiency
rates and downtime for both individual machines and
the entire spinning mill. Comparisons between machines
on selected periods of time are made very simple so that
improvement opportunities can be easily identified.
YarNet enables the operator to edit production recipes,
downloading and uploading them between any machine
and their computer. He can also export them in Excel
format to share with colleagues as necessary.
YarNet gathers and analyses data about production
and energy consumption, giving a visual representation
of the tradeoffs (kW/kg).

MRM
MRM is Marzoli software to continuously monitor
the operating conditions of textile machines. It can identify
developing malfunctions before a fault occurs and highlight
improvement opportunities on efficiency rates and energy
consumption levels. Data about temperature, power
consumption, speed and vibration are collected from PLCs
OPENING SECTION
(programmable logic controllers) and sensors installed
on each machine. The software verifies the monitored
COMBING SECTION
parameters are within the nominal operating ranges;
it can even adjust for room temperature variations to
SPINNING SECTION
ensure continuous optimisation. If any parameter is out of
tolerance, an automatic email alert is sent to the customer.
The customer can also access the dedicated online portal BENEFITS

to see information for predictive maintenance and of the

· Higher productivity · Higher efficiency
overall efficiency of the plant. Through dedicated modules · No machines unplanned · Complete reliability
(Optimisation Tools) it is possible to optimise the performance downtimes
· Trouble free spinning
of every machine, in particular on energy consumption and · Prevention from major experience
machine failures
levels of efficiency. If required, Marzoli’s customer service · Better maintenance
· Longer plant lifespan planning
team can access the data to diagnose actual and developing
problems and recommend appropriate actions.

25
Marzoli

GALILEO
BLOW ROOM LINES

Cotton with trash content up to 3%

Production 1,000 kg/h

3 6

4 5

TECHNICAL DESCRIPTION - LEGEND

Blending 8 x 2 = 16
1 B12 - 1,000 kg/h 4 B152 - 1,000 kg/h
2 B390L - 500+500 kg/h 5 B380L - 1,000 kg/h
Cleaning efficiency Up to 70%
3 B143L, 8 chambers - 1,000 kg/h 6 B153L - 1,000 kg/h

Cotton with trash content up to 3%

Production 1,600 kg/h

3 6

4 5

TECHNICAL DESCRIPTION - LEGEND

Blending 8 x 4 = 32
1 B12 - 1,600 kg/h 4 B152 - 1,600 kg/h
2 B390L - 800+800 kg/h 5 B380L - 800 kg/h
Cleaning efficiency Up to 70%
3 B143L, 8 chambers - 1,600 kg/h 6 B153L - 800 kg/h

26
 Galileo - Blowroom / Opening Section

Cotton with trash content over 5%

Production 1,000 kg/h

2 7

3 5

4 6

TECHNICAL DESCRIPTION - LEGEND

Blending 8 x 4 x 2 = 64
1 B12 - 1,000 kg/h 5 B380L - 500 kg/h
2 B390L - 500+500 kg/h 6 B380L - 1,000 kg/h
Cleaning efficiency Up to 80%
3 B143L, 8 chambers - 1,000 kg/h 7 B153L - 1,000 kg/h
4 B152 - 1,000 kg/h

Tuft blending line

Production 350 kg/h/B13

2 5

3 4

TECHNICAL DESCRIPTION - LEGEND

Tuft blending Up to 5 components
1 B23 4 B134L
2 B13 5 B153L
Blending accuracy Discrepancy <1%
3 B143L, 4 chambers

27
 MARZOLI MARZOLI MACHINES MARZOLI INDIA

MIX COMUNICAZIONE - MI
INTERNATIONAL, INC. TEXTILE SRL MTMM PVT. LTD.
USA Italy India

Legend
Marzoli premises
Sales & service network
Sales affiliates

Marzoli Machines Textile S.r.l.

Via Sant’Alberto, 10
25036 Palazzolo sull’Oglio (BS)
Italy
Tel. +39 030 73091
sales@marzoli.it

Marzoli International, Inc.

100 Corporate Dr., Suite M
Spartanburg, SC 29303
U.S.A.
666BLOW0519E 05/2019

Tel. +1 864 599 7100

Fax +1 864 599 7111
sales@marzoli.com

Marzoli India
MTMM Pvt. Ltd.
Shed No 6, Bangalore Main Road
SIDCO Industrial Estate
Hosur – 635 126
Krishnagiri District, Tamil Nadu
India
Tel +91 4344 400111

A Camozzi Group Company

www.marzoli.com