Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 45 views

    PipeCalc - Friction Loss PDF

    Uploaded by

    N_Locus
    The document provides details on calculating friction loss for a water pumping system with two parallel pumps. It includes the pumped fluid properties, static head, layout as a wet well installation, and flow rate. The Colebrook-White model is used for the calculation. Pipe dimensions, lengths, fittings, and velocities are listed for individual discharge pipes and a common discharge pipe. Total friction head losses are calculated to be 0.5405m and 7.786m respectively. With a total static head of 6m, the total required head is calculated as 14.33m.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    PipeCalc - Friction Loss PDF

    Uploaded by

    N_Locus
    45 views1 page
    The document provides details on calculating friction loss for a water pumping system with two parallel pumps. It includes the pumped fluid properties, static head, layout as a wet well installation, and flow rate. The Colebrook-White model is used for the calculation. Pipe dimensions, lengths, fittings, and velocities are listed for individual discharge pipes and a common discharge pipe. Total friction head losses are calculated to be 0.5405m and 7.786m respectively. With a total static head of 6m, the total required head is calculated as 14.33m.

    Original Title

    PipeCalc_-_Friction_Loss (1).pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details on calculating friction loss for a water pumping system with two parallel pumps. It includes the pumped fluid properties, static head, layout as a wet well installation, and flow rate. The Colebrook-White model is used for the calculation. Pipe dimensions, lengths, fittings, and velocities are listed for individual discharge pipes and a common discharge pipe. Total friction head losses are calculated to be 0.5405m and 7.786m respectively. With a total static head of 6m, the total required head is calculated as 14.33m.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    45 views1 page

    PipeCalc - Friction Loss PDF

    Uploaded by

    N_Locus
    The document provides details on calculating friction loss for a water pumping system with two parallel pumps. It includes the pumped fluid properties, static head, layout as a wet well installation, and flow rate. The Colebrook-White model is used for the calculation. Pipe dimensions, lengths, fittings, and velocities are listed for individual discharge pipes and a common discharge pipe. Total friction head losses are calculated to be 0.5405m and 7.786m respectively. With a total static head of 6m, the total required head is calculated as 14.33m.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Friction loss calculation

    Pumped fluid Static head Layout


    Water, pure 6 Wet well installation

    Flow Number of pumps Calculation model


    80 l/s 2 Colebrook-White

    Viscosity Nature of system


    1.569 mm²/s Single pumps as parallel circuit

    Type Ø ? or L Qty. v k ΔH
    (mm) (m/s) (mm) (m)
    Ø = Diameter v = Velocity k = Pipe roughness ΔH = Head loss
    Individual discharge side pipe - Plastic / PE100 (HDPE) PE 4710
    SDR 17 (PN 10) / DN 200 (200x11,9 mm) / DIN 8074/75 /EN 13244
    Pipe length 176.2 8m 1 1.64 0.01 0.1016
    Elbows 176.2 0.6 2 1.64 0.08229
    Inlet 176.2 1 1 1.64 0.1372
    Non-return valves 176.2 0.9 1 1.64 0.1234
    T-piece 176.2 0.4 1 1.64 0.05486
    VALVE 176.2 0.3 1 1.64 0.04115
    Total friction head 0.5405
    Common discharge side pipe - Plastic / PE100 (HDPE) PE 4710
    SDR 17 (PN 10) / DN 200 (250x14,8 mm) / DIN 8074/75 /EN 13244
    Pipe length 220.4 450 m 1 2.097 0.01 6.849
    Discharge Connection 220.4 0.3 1 2.097 0.06723
    Outlet 220.4 1 1 2.097 0.2241
    T-piece 220.4 0.4 1 2.097 0.08964
    VALVE 220.4 0.3 1 2.097 0.06723
    Elbow 45° 220.4 1.08 10 2.097 0.2946
    Elbow 90° 220.4 0.678 4 2.097 0.1941
    Total friction head 7.786

    Friction loss head 8.326 m


    Total static head 6m
    Total head 14.33 m

    Project Created by Last update 6/6/2020


    Block AW.ITEMNAME Created on 6/6/2020 Page 1 / 1

    You might also like