LCD Module User Manual

Dalian Good Display Co.,Ltd.

LCD Module User Manual

YM12864P

Dalian Good Display Co., Ltd.

Tel: +86-411-84619565
Fax: +86-411-84619585
WebSite: http://www.good-lcd.com
 LCD Module User Manual YM12864P

Table of Content
1. Basic Specifications……………………………………………………………………………………………………..3
1.1 Display and Mechanical Specifications…………..…………………………………………………………………3
1.2 Block Diagram…………………………...………….………………………………………………………………3
1.3 Terminal Functions…………………….……………………………………………………………………..……....4
1.4 Mechanical Drawing ………..………………………………………………..……………………………………....5
2. Absolute Maximum Ratings……………………………………………………………………………………………6
3. Electrical Characteristics..……………………………………………………………………………. …………….....7
4. IC Contents Attachment………………………………………………………………………………. ………….....7
5. LCM Numbering System..…………….…………………………………………….………………………………..8
6. Design and Handling Precaution……………………………………………..…………….………………...9

Dalian Good Diplay Co.,Ltd

 LCD Module User Manual YM12864P

1.0 Basic Specification

1.1 Display and Mechanical Specification
ITEM STANDARD VALUE UNIT
Display Type 128 X 64 Dots
LCD Type FSTN/ Transflective/Positive --
LCD Duty 1/64 --
LCD Bias 1/9 Bias
Viewing Direction 12:00 Clock
Backlight Type Edge LED Backlight with white color --
Interface 6800/8080 series or Serial Interface --
Driver IC SPLC501C (Gold Bump Chip) --
IC Package COG --
Module Dimension 39.0(W) × 29.0(H) × 6.1(T) (MAX) mm
Visual Area 36.0(W) × 20.0(H) mm
Dot size 0.220 ×0.235 mm
Dot Pitch 0.250 ×0.265 mm
Operating Temperature 0 ~ 50 ℃
Storage Temperature -10 ~ 60 ℃

1.2 Block Diagram

LED Backlight Circuit

LCD Panel COM63

128 X 64 Pixels COM32
SEG127

COM31
SEG0

COM0
SEG127
SEG0

COM0 COM32
IC: SPLC501
COM31 COM63

Dalian Good Diplay Co.,Ltd

 LCD Module User Manual YM12864P
1.3 Terminal Functions
Pin Pin
I/O Descriptions
No. Name
1 NC NC pads, no connection for user
Chip Select
2 /CS1 I /CS1=L, enable access to the LCD module
/CS1=H, disable access to the LCD module
Reset Signal
3 RES I /RES=L, Initialization is executed
/RES=H, Normal running
A0 = “H” : Indicates that DB0-DB7 are display data
4 A0 I
A0 = “L” : Indicates that DB0-DB7 are control data
This is the read/write control signal input terminal.
5 R/W(WR) I R/W = ‘H’: Read.
R/W = ‘L’: Write.
When connected to an 8080 MPU, this is LOW active. This pin is
connected to the RD signal of the 8080 MPU, and the SPLC501C data
6 RD(E) I bus is in an output status when this signal is ‘L’. When connected to a
6800 Series MPU, this is HIGH active. This is the 68000 Series MPU
enable clock input terminal.
7 D0
8 D1 This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit
9 D2 standard MPU data bus. When t he serial interface is
10 D3 selected(PS= ’L’),DB7 serves as the serial data i nput terminal(Sl) and
I/O
11 D4 BDB6 serves as the serial clock input terminal(SCL). At the same time,
12 D5 DB5-0 are set to high impedance. When the chip select is inactive DB0
13 D6(SCL) to DB7 are set to high impendance.
14 D7(Sl)
15 VDD P Positive Power Supply
16 VSS P Negative Power Supply, Ground(0V)
17 VOUT P DC/DC voltage converter output
18 CAP3+ Capacitor 3+ pad for internal DC/DC voltage converter
19 CAP1- Capacitor 1-pad for internal DC/DC voltage converter
20 CAP1+ O Capacitor 1+ pad for internal DC/DC voltage converter
21 CAP2+ Capacitor 2 + pad for internal DC/DC voltage converter
22 CAP2- Capacitor 2 -pad for internal DC/DC voltage converter
23 V1 A multi-level power supply for the liquid crystal drive. Voltage levels are
24 V2 determined based on VDD, and must maintain the relative m agnitudes
25 V3 shown below.
P
26 V4 VDD (= V0) ≧V1≧V2≧V3≧V4≧V5
27 V5 Master operation: When the power supply turns ON, the internal power
supply circuits generate the V1 to V4 voltages shown bel ow. The

Dalian Good Diplay Co.,Ltd

 LCD Module User Manual YM12864P

voltage settings are selected by the LCD bias command.

This is the MPU interface switch terminal.
28 C86 I C86 = ‘H’: 6800 Series MPU interface.
C86 = ‘L’: 8080 MPU interface.
This is the parallel data input/serial data input switch terminal.
29 PS I PS = ‘H’: Parallel data input.
PS = ‘L’: Serial data input.
30 NC NC pads, no connection for user

Dalian Good Diplay Co.,Ltd

 REV. DESCRIPTION DATE
All Pages Of This Edition Approved
Signature: Date:

1.4 Mechanical Drawing

VIEW DIRECTION

V.A
A.A
BACK

FRONT

MIN

Dalian Good Diplay Co.,Ltd

LCD Module User Manual

Dalian Good Display Co.,Ltd

Unspecified ±0.20 UNITS: mm DATE:
Tolerance: MODE NUMBER :
SHEET: 1 Of 1
DESIGN BY: LIANG NING 2009/10/27
YM12864P
CHECKED BY:
DATE: 2008/08/04
APPROVED BY: DO NOT SCALE THIS DRAWING. PROJECTION
YM12864P
 LCD Module User Manual YM12864P

2. Absolute Maximum Ratings

Items Symbol Min Max. Unit Condition
Supply Voltage (Logic) VDD-Vss 0 +7.0 V Vss=0V
Supply Voltage (LCD Driver) VEE -12 +0.3 V Relative to VDD

Input Voltage VIN -0.3 VDD+0.3 V Vss=0V

Operating Temperature TOP 0 +50 ℃ No Condensation
Storage Temperature TST -10 +60 ℃ No Condensation
Cautions:
Any stresses exc eeding the Absolute Maximum Ratings may cause subst antial damage to the device F unctional
operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to
extreme conditions may affect device reliability

3. Electrical Characteristics
3.1 DC Characteristics

Items Symbol Min Typ. Max. Unit Condition

Supply Voltage (Logic) VDD-Vss 2.7 3.0 3.3 V
-- -- --
Supply Voltage (LCD Driver) V0 -- 10.5 -- V 25℃
-- -- --
Input Voltage VIH 0.8 VDD -- VDD
V --
VIL Vss -- 0.2 VDD
Logic Supply Current IDD -- -- 0.4 mA VDD-Vss
= 3.0V

3.2 LED Backlight Circuit Characteristics

Items Symbol MIN TYP. MAX. Unit Application pin

Forward Voltage VfLED+ - 3.0 - V LED+

Forward Current IfLED+ - 45 60 mA LED+
Cautions:
Exceeding the recommended driving current could cause substantial damage to the backlight and shorten its lifetime.

LED +

LED-
No. of LED = 1 x 3 =3 SMD

Dalian Good Diplay Co.,Ltd

 LCD Module User Manual YM12864P

4. IC Contents Attachment:

Reference Documents From SUNPLUS SPLC501C Driver with

Contents

SPLC501C (Version 1.4 ) Page

1. GENERAL DESCRIPTION………………………………………………..P4
2. BLOCK DIAGRAM ……………………………………………………..…P5
3. DESCRIPTION OF FUNCTIONS…………………………………………P10
4. COMMAND DESCRIPTION……………………………………………… P37
5. TIMING CHARACTERISTICS……………………………………………..P43

Dalian Good Diplay Co.,Ltd

 LCD Module User Manual YM12864P

5. LCM Numbering System

Y M 12864 P

Version Number

128 X 64 Dots

COG LCD Module

Good Display Standard product

Dalian Good Diplay Co.,Ltd

 LCD Module User Manual YM12864P

6. Design and Handling Precaution

1.0 The LCD panel is made by glass. Any mechanical shock (e.g. dropping form high place) will damage
the LCD module.
2.0 Do not add excessive force on the surface of the display, which may cause the Display color change
abnormally.
3.0 The polarizer on the LCD is easily get scratched. If possible, do not remove the LCD protective film
until the last step of installation.
4.0 Never attempt to disassemble or rework the LCD module.
5.0 Only Clean the LCD with Isopropyl Alcohol or Ethyl Alcohol. Other solvents (e.g. water) may damage
the LCD.
6.0 When mounting the LCD module, make sure that it is free form twisting, warping and distortion.
7.0 Ensure t o provide enough space (with cushion) betw een case and L CD panel to prevent external
force adding on it, or it may cause damage to the LCD or degrade the display result.
8.0 Only hold the LCD module by its side. Never hold LCD module by adds force on the heat seal or TAB.
9.0 Never add force to component of the LCD mod ule. It may cause invisible damage or degrade of the
reliability.
10.0 LCD module could be eas ily damaged by st atic electricity. Be careful to main tain an optimum
anti-static work environment to protect the LCD module.
11.0 When peeling off the protective film from LCD, static charge may cause abnormal display pattern. It
is normal and will resume to normal in a short while.
12.0 Take care and prevent get hurt by the LCD panel sharp edge.
13.0 Never operate the LCD module exceed the absolute maximum ratings.
14.0 Keep the signal line as short as possible to prevent noisy signal applying to LCD module.
15.0 Never apply signal to the LCD module without power supply.
16.0 IC chip (e.g. TAB or COG) is sensitive to the light. Strong lighting environment could possibly cause
malfunction. Light sealing structure casing is recommend.
17.0 LCD module reliability may be reduced by temperature shock.
18.0 When storing the LCD module, avoid exposure to the direct sunlight, high humidity, high temperature
or low temperature. They may damage or degrade the LCD module

Dalian Good Diplay Co.,Ltd