Bulletin 800B

16 mm Push Buttons
Product Selection

Selector Switch Operators

2-Position Selector Switches 3-Position Selector Switches
0
Operator Type

Maintained Return from Right Maintained Return from Both

Cat. No. 800B-SM2A 800B-SR2A 800B-SM3A 800B-SB3A
1
Operator Type

Keyed, Maintained Keyed, Return from Right Keyed, Maintained Keyed, Return from Both
Cat. No. 800B-KM2A 800B-KR2A 800B-KM3A 800B-KB3A 2
Note: Package Quantity = 1
Target Table and Operator Position
2-Position Target Table 3-Position Target Table
Contact
Block
Contact
Block Contact
3
Cat. No. Location Type
Top NA — — — — —
800B-PS11 N.C. X O O X X
Bottom
N.O. O X X O O 4
N.C. X O X X O
Top
N.O. O X O O X
800B-PS22
N.C. X O O X X
Bottom

Top
N.O.
NA
O
— —
X X
—
O
—
O
—
5
800B-PT01
Bottom N.C. X O O X X
Top X O X X O
800B-PT02 N.C.
Bottom X O O X X
Top N.O. O X O O X 6
800B-PT11
Bottom N.C. X O O X X
Note: X = Closed/O = Open
 To illuminate a selector switch, add either an LED or incandescent bulb. All selector switches have a clear lens. Green and red LED bulbs can be used to
change the selector switch color. 7
Emergency Stop Operators — Non-Illuminated, Twist-to-Release (Trigger Action)‡
Description Pkg. Quantity Cat. No.
8
Emergency stop operator 1 800B-MT

Cat. No. 800B-MT 9

‡ Operator is EN ISO 13850 compliant with standard N.C. contact blocks.

10

11

12

13
www.ab.com/catalogs Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P 10-147
 Bulletin 800B
16 mm Push Buttons
Specifications

Specifications
Mechanical Ratings
0 Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. for 6 hr duration, no damage
Shock Tested at 1/2 cycle sine wave for 11 ms; no damage at 100 G
Degree of protection IP66, Type 4/4X/13
2 000 000 Cycles Push buttons – momentary
1 Mechanical durability per
1 000 000 Cycles Push buttons – maintained
250 000 Cycles Selector switch
EN 60947-5-1 (Annex C)
200 000 Cycles Key selector switch
200 000 Cycles Twist-to-release E-stop

2 Operating forces (typical with one contact block)

Extended = 5…8 N
E-stop = 14…16 N
Operating torque
Selector switch = 0.06 N•m (0.5 lb•in)
(typical application with one contact block)
Mounting torque 1.1 N•m (10 lb•in)

3 Temperature range (operating)

Environmental
-25…+55 °C (-13…+131 °F)
Temperature range (short term storage) -40…+70 °C (-40…+158 °F)
Humidity 50…95% RH from 25…60 °C (77…140 °F)

4 Mechanical Ratings — Contact Blocks

Vibration (assembled to panel) Tested at 10…2000 Hz, 1.52 mm displacement (peak-to-peak) max./10 G max. 6 hr
Shock Tested at 1/2 cycle sine wave for 11 ms and no damage at 100 G max.
Contact durability 200 000 cycles (Cat. No. 800B-PS_)

5 N.O. / N.C. Snap action

Slow make/break
positive opening
Contact operation N.C.
→
N.O. Slow make/break
6 Push button travel to change electrical state 1.4 mm (0.06 in.)
1 contact block = 3 N
Operating forces (typical)
2 contact blocks = 6 N
Electrical Ratings
7 Standard contact block ratings
AC 15, B300, 1.5 A/240V AC, 3 A/120V AC
DC 13, R300, 0.1 A/250V DC, 0.22 A/125V DC
Nominal Voltage Current Frequency
LED Module ratings 12…24V AC 12 mA 50/60 Hz
12…24V DC 12 mA DC
8 Thermal current
120V AC 9 mA
Ith = 5 A (AC), Ith = 1 A (DC)
50/60 Hz

Insulation voltage (Ui) 300V

Stab termination 2.8 X 0.5 mm
Dielectric strength (minimum) 1500V 1 min.
9 External short circuit protection – standard
6 A type gL/gG cartridge fuse to EN 60269-2-1 or gN (Class J to UL 248-8 or Class C to UL 248-4)
blocks
Electrical shock protection Finger-safe conforming to IP2X

Illumination
10 Green 525 nm
LED Dominant wavelength Red 624 nm
White —
Green 500 mcd
LED Luminous intensity Red 400 mcd
11 White 1000 mcd
Incandescent maximum wattage 1.2 W
Materials
Springs Stainless steel and gold-plated, high-carbon steel

12 Electrical contacts
Stab terminals
Gold-plated silver
Phosphor bronze with gold or nickel plating
Lenses Polycarbonate

13
www.ab.com/catalogs Preferred availability cat. nos. are bold.
10-150 Publication A117-CA001A-EN-P
 Bulletin 800B
16 mm Push Buttons
Approximate Dimensions

Approximate Dimensions
Round Hole Patterns
Round & Square Rectangle
0
18 24
18

1.7 +0
12 42.4
-0.1 18 18 1
54.4
Ø16 +0.2
-0
15 +0.1
-0
2
18

14 42.4 Large Square Emergency Stop

56.4 24 40
36 3
24
18

40
4
12.3 42.4
54.7

Printed Circuit Board Pin Socket

Square Max 18.0 13.65 ±0.20
5
4.25 ±0.20
Max 18.0
18

0.30
12 42.4
18
54.4
12.0 ±0.12 7
Max 10.0

Rectangle 6.0 ±0.12

14.4 ±0.12
8
18

0.87

12 42.4
24 54.4 7.2 ±0.12

10 - Ø1.10 9
Large Square

10
24

12 42.4
24
54.4 11
Emergency Stop

12
26

30 42.4
72.4 13
www.ab.com/catalogs Preferred availability cat. nos. are bold.
Publication A117-CA001A-EN-P 10-151