Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 334 views

    Confixbond HV PDF

    Uploaded by

    John vincent Salazar
    CONFIXBOND HV is a two-part epoxy adhesive designed to bond concrete. It cures even on damp surfaces and exhibits a tough, durable bond between concrete and other materials. It can be used to bond old concrete to new concrete, replace cement, anchor machinery to floors, and bond tiles. When mixed in a 1:1 ratio, it has a pot life of 90-120 minutes and initial curing time of 6-8 hours. It provides strong bonding with tensile strength of 3,000 psi and compressive strength of 8,500 psi.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Confixbond HV PDF

    Uploaded by

    John vincent Salazar
    334 views1 page
    CONFIXBOND HV is a two-part epoxy adhesive designed to bond concrete. It cures even on damp surfaces and exhibits a tough, durable bond between concrete and other materials. It can be used to bond old concrete to new concrete, replace cement, anchor machinery to floors, and bond tiles. When mixed in a 1:1 ratio, it has a pot life of 90-120 minutes and initial curing time of 6-8 hours. It provides strong bonding with tensile strength of 3,000 psi and compressive strength of 8,500 psi.

    Original Title

    confixbond HV.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    CONFIXBOND HV is a two-part epoxy adhesive designed to bond concrete. It cures even on damp surfaces and exhibits a tough, durable bond between concrete and other materials. It can be used to bond old concrete to new concrete, replace cement, anchor machinery to floors, and bond tiles. When mixed in a 1:1 ratio, it has a pot life of 90-120 minutes and initial curing time of 6-8 hours. It provides strong bonding with tensile strength of 3,000 psi and compressive strength of 8,500 psi.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    334 views1 page

    Confixbond HV PDF

    Uploaded by

    John vincent Salazar
    CONFIXBOND HV is a two-part epoxy adhesive designed to bond concrete. It cures even on damp surfaces and exhibits a tough, durable bond between concrete and other materials. It can be used to bond old concrete to new concrete, replace cement, anchor machinery to floors, and bond tiles. When mixed in a 1:1 ratio, it has a pot life of 90-120 minutes and initial curing time of 6-8 hours. It provides strong bonding with tensile strength of 3,000 psi and compressive strength of 8,500 psi.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TECHNICAL DATA SHEET

    CONFIXBOND HV
    Concrete Bonding Agent

    Table 2: Physical Properties: CURED STATE


    PRODUCT DESCRIPTION
    Parameters Results Remarks
    CONFIXBOND HV is an adhesive designed for
    concrete which set permanently upon curing and has Tensile Strength 3,000  500psi ASTM 638
    the following advantages: Flexural Strength 7,000  500psi ASTM D79
    Compressive Strength 8,500  500psi ASTM D695
    1. Cures even on damp or dry conditions. Hardness 80-90 Shore D
    2. Does not slump when applied on vertical or Shrinkage negligible
    sloping surfaces, up to 1/8” thick films.
    3. When cured, it exhibits tough, hard, durable bond INSTRUCTION FOR USE
    between concrete and wood, metal, masonry or
    asbestos. SURFACE PREPARATION:
    Concrete surface must be free of dirt, paint, oil grease,
    TYPICAL USES lose materials and other contaminants. On oil surfaces,
    As an Epoxy Adhesive: wash with soap and water or acid etching (10%
    1. To bond old concrete to freshly poured concrete muriatic acid or hydrochloric acid) is recommended.
    topping, thus eliminating “cold joints” between old MIXING:
    and new concrete. Mix equal volumes of Part A and Part B. Blend well
    2. To replace cement in bonding pre-cast, concrete until uniform color is obtained. To avoid wastage,
    structural units such as concrete decors under prepare only the amount consumable within one (1)
    damp or dry conditions. hour.
    3. To bond wood or metal to concrete surfaces such
    as anchoring machinery to a concrete floor. METHOD:
    4. To anchor and grout concrete or ceramic floor After thorough blending of mixture has been done,
    tiles over cement, wood or steel. apply the adhesive on both surfaces to be bonded by
    As an Epoxy Mortar: spatula, trowel or putty knife. In bonding old to new
    concrete, coat old concrete with CONFIXBOND HV
    1. To patch spalled and damaged areas in concrete and pour fresh concrete immediately over epoxy tack
    structures. coat. For an effective bond, applied epoxy should be
    2. To use as a tack coat or primer before pouring very tacky before pouring the fresh concrete mixture,
    fresh concrete topping when bringing low areas having minimal water content, such as, a slump of two
    to proper grade. (2) inches.
    TECHNICAL DATA
    CLEANING:
    Table 1: Physical Properties of Uncured State CONFIXBOND HV can be removed in its uncured
    Parameters Results state through the use of solvents or thinners.
    Color: Part A Gray HEALTH PRECAUTIONS:
    Part B Beige Avoid prolonged or repeated skin contact. In case of
    Consistency Thixotropic paste skin contact, wash thoroughly with soap and water. If
    Solid Content 100 % contact with eyes occurs, flush thoroughly with clean
    Mixing Ratio (A:B) 1:1 by volume water and seek medical attention immediately.
    Pot Life @ 25°C 90-120 minutes
    Curing Time (Initial) 6 – 8 hours PACKAGING
    Tack Free Time 4 – 6 hours CONFIXBOND HV is available in gallon can sets.
    Shelf Life 18 months
    Coverage 1 gallon-set will yield 6,600 cc depending
    on surface roughness and porosity.

    Important Note:
    The information contained in this leaflet is published to the best of our knowledge and is supported by
    current available data. Hence, subject to the care and method of application, deviations (from
    published values) in performance may occur. Our guarantee is therefore limited to the quantity of the
    supplied material.

    CONFIX BOND HV Ver00: Date 04/11/2017 Page 1

    You might also like