Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

HWXX-6516DS1-VTM - HWXX-6516DS1-A2M: General Specifications

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

HWXX-6516DS1-VTM | HWXX-6516DS1-A2M

4-port sector antenna, 4x 1710–2690 MHz, 65° HPBW, RET


compatible
Provides a future-ready antenna solution with flexibility to reassign antenna, for example
GSM 1800 service to 2.6GHz LTE at a later date
Employs state-of-the-art ultra wideband technology providing excellent RF performance in
all bands

General Specifications
Antenna Type Sector

Band Single band

Color Light gray

Grounding Type RF connector inner conductor and body grounded to reflector and
mounting bracket

Performance Note Outdoor usage

Radome Material PVC, UV resistant

Radiator Material Low loss circuit board

Reflector Material Aluminum

RF Connector Interface 7-16 DIN Female

RF Connector Location Bottom

RF Connector Quantity, high band 4

RF Connector Quantity, total 4

Remote Electrical Tilt (RET) Information, General


Model with Factory Installed AISG 2.0 Actuator HWXX-6516DS1-A2M

Dimensions
Width 305 mm   |   12.008 in

Length 1390 mm   |   54.724 in

Depth 118 mm   |   4.646 in

Array Layout

Page 1 of 4

©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 30, 2020
HWXX-6516DS1-VTM | HWXX-6516DS1-A2M

Electrical Specifications
Impedance 50 ohm

Operating Frequency Band 1710 – 2690 MHz

Polarization ±45°

Electrical Specifications
Frequency Band, MHz 1710–1880 1850–1990 1920–2170 2300–2500 2500–2690
Gain, dBi 17.4 17.6 17.9 18.6 18.6
Beamwidth, Horizontal, 66 65 65 63 62
degrees
Beamwidth, Vertical, degrees 6.7 6.4 6.1 5.3 5.1
Beam Tilt, degrees 0–10 0–10 0–10 0–10 0–10

Page 2 of 4

©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 30, 2020
HWXX-6516DS1-VTM | HWXX-6516DS1-A2M
USLS (First Lobe), dB 16 16 16 18 18
Front-to-Back Ratio at 180°, 27 30 30 29 29
dB
Isolation, Cross Polarization, 30 30 30 30 30
dB
Isolation, Inter-band, dB 28 28 28 28 28
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0

PIM, 3rd Order, 2 x 20 W, dBc -153 -153 -153 -153 -153


Input Power per Port, 350 350 350 350 350
maximum, watts

Electrical Specifications, BASTA


Frequency Band, MHz 1710–1880 1850–1990 1920–2170 2300–2500 2500–2690
Gain by all Beam Tilts, 17.2 17.4 17.8 18 18.3
average, dBi
Gain by all Beam Tilts ±0.3 ±0.4 ±0.5 ±0.3 ±0.3
Tolerance, dB
Gain by Beam Tilt, average, 0 ° | 17.0 0 ° | 17.3 0 ° | 17.8 0 ° | 17.8 0 ° | 18.3
dBi 5 ° | 17.3 5 ° | 17.4 5 ° | 17.9 5 ° | 18.1 5 ° | 18.4
10 ° | 17.1 10 ° | 17.2 10 ° | 17.6 10 ° | 18.0 10 ° | 17.9

Beamwidth, Horizontal ±2.7 ±2.7 ±2.1 ±2.1 ±3


Tolerance, degrees
Beamwidth, Vertical ±0.3 ±0.2 ±0.4 ±0.2 ±0.2
Tolerance, degrees
USLS, beampeak to 20° 16 16 17 20 21
above beampeak, dB
Front-to-Back Total Power at 25 26 26.5 27.4 25.9
180° ± 30°, dB
CPR at Boresight, dB 16 17 16 19 17
CPR at Sector, dB 15 14 14 9 10

Mechanical Specifications
Wind Loading at Velocity, frontal 115.1 lbf @ 150 km/h    |   512.0 N @ 150 km/h

Wind Loading at Velocity, lateral 120.0 N @ 150 km/h    |   27.0 lbf @ 150 km/h

Wind Speed, maximum 241 km/h   |   149.75 mph

Packaging and Weights


Width, packed 413 mm   |   16.26 in

Depth, packed 249 mm   |   9.803 in

Length, packed 1525 mm   |   60.039 in

Page 3 of 4

©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 30, 2020
HWXX-6516DS1-VTM | HWXX-6516DS1-A2M
Net Weight, without mounting kit 10.2 kg   |   22.487 lb

Weight, gross 18.5 kg   |   40.785 lb

Regulatory Compliance/Certifications
Agency Classification
CE Compliant with the relevant CE product directives
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant

Included Products
600899A- — Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one
2 bottom bracket set.

* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance

Page 4 of 4

©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: April 30, 2020

You might also like