SUBMITTAL FOR COPPER PIPING

Supplied By
1) Distribution Certificate
2) Warranty Certificate
3) Copper Pipe Specifications
4) Material Test Certificate
5) Product Certification
6) High Pressure Statement
  
 
 
Distribution Certificate 
 
  
 
 
Warranty Certificate 
 
  
 
 
Copper Pipe Specification 
 
 COPPER TUBE DATA

REFRIGERATION SERVICE TUBE

STREAMLINE® dehydrated and nitrogen purged and sealed copper tube is of a consistent fully annealed temper, bright
and thoroughly dried and packaged in individual cartons. Each carton is clearly labeled showing size and length.

Tube is manufactured in accordance with ASTM B 280 and ANSI B9.1, refrigeration industry standards. For special
lengths and sizes not listed please consult your local Mueller Industries representative.

COILS
SIZE RATED INTERNAL WORKING PRESSURE (PSIG) 50 FT. SH IPPING INFORMATION 100 FT.
O.D. WALL 150˚F 250˚F 350˚F 400˚F COIL DIA WT/COIL COIL/MSTR COL DIA WT/COIL
1/8 .030 2613 2459 2049 1537 10 3/4 1.74 10 17 3.48
3/16 .030 1645 1548 1290 968 11 3/4 2.88 10 185/8 5.76
1/4 .030 1195 1125 938 703 13 1/2 4.02 10 185/8 8.04
5/16 .032 1017 957 798 598 15 1/2 5.45 10 197/8 10.90
3/8 .032 836 787 656 492 17 6.70 10 217/8 13.40
1/2 .032 618 581 485 363 197/8 9.10 5 25 18.20
5/8 .035 525 494 412 309 211/4 12.55 5 251/4 25.10
3/4 .035 435 409 341 256 23 1/4 15.25 3 29 30.50
7/8 .045 495 466 388 291 271/4 22.75 3 321/4 45.50
11/8 .050 420 395 330 247 341/2 32.75 – 381/2 65.50
13/8 .055 373 351 293 219 45 44.20 – 45 88.40
15/8 .060 347 327 272 204 45 57.00 – 49 114.00

TECH NICAL DATA

Values of allowable internal working pressure for copper tube in service are based on the formula from ANSI B31,
Standard Code for Pressure Piping:

P= 2 S tm
D max - 0.8 tm P= Allowable pressure @ 150˚F S = 5100 PSIG annealed
S= Allowable stress @ 200˚F S = 4800 PSIG annealed
T= Wall thickness @ 300˚F S = 4700 PSIG annealed
D max= Outside Diameter @ 400˚F S = 3000 PSIG annealed

All ratings listed for types K, L, M, DWV and refrigeration service tube in the preceding charts are calculated for tube
in the annealed condition. These values should be used when soldering, brazing or welding is employed for joining
components in a system. While the ratings for hard drawn tube are substantially higher, they should only be used for
systems using properly designed flare or compression mechanical joints, since joining by any heating process might
anneal (soften) the tube.

In designing a system, careful consideration should also be given to joint ratings as well as those of the components.

Mueller Industries, Inc. 21

COPPER TUBE DATA

N ITROG EN IZED® COPPER TUBE

Mueller Industries’cleaning,purging and pressurizing process assures the high levelof tube cleanliness in conform ance
to astm B280,the refrigeration industry standard. The tube is sealed w ith plugs w hich m aintain the standard of cleanli-
ness from the factory to the job site.
STREAM LIN E® CO PPER TU BE PR ESSU R IZED W ITH N ITR O G EN provides m axim um protection against the form ation of
harm fuloxides norm ally form ed during brazing operations. Reduction ofthese oxides greatly reduces system com tam ination.
Plugs are reusable. W hen less than a 20’length of tube is required for an installation the unused length of tube m ay be
replugged to prevent atm ospheric contam ination during storage.
STREAM LIN E® N itrogenized® seam less copper tube is available in sizes 3/8” O D thru 3-1/8” O D . Larger sizes from
3-5/8 O D thru 8-1/8” are cleaned and capped. Manufactured and cleaned in Accordance w ith ASTM B280.20-ft.
Lengths H ard D raw n - Cleaned and Capped - Color Coded - Marked “ACR /MED ”.

TYPE K N ITROG EN IZED® OXY/M ED

RATED W ORKIN G PRESSURE (PSIG )
SIZE W T/FT FT/BN DL W ALL 150 F 200 F 300 F 400 F
3/8 .145 500 .035 913 860 842 537
1/2 .269 500 .049 960 904 885 565
5/8 .344 500 .049 758 713 698 446
3/4 .418 200 .049 626 589 577 368
7/8 .641 200 .065 724 682 668 426
11/8 .839 100 .065 557 524 513 327
13/8 1.04 100 .065 452 425 416 266
15/8 1.36 100 .072 420 396 387 247
21/8 2.06 .083 370 348 341 217
25/8 2.93 .095 338 319 312 199
31/8 4.00 .109 328 308 302 193
35/8 5.12 .120 311 293 286 183
41/8 6.51 .134 306 288 282 180
51/8 9.67 .160 293 276 270 172
61/8 13.90 .192 295 277 271 173
81/8 25.90 .271 314 295 289 184

TYPE L N ITROG EN IZED® ACR/M ED

RATED W ORKIN G PRESSURE (PSIG )
SIZE W T/FT FT/BN DL W ALL 150 F 200 F 300 F 400 F
3/8 .126 500 .030 775 729 714 456
1/2 .198 500 .035 662 623 610 389
5/8 .285 500 .040 613 577 565 361
3/4 .362 200 .042 537 505 495 316
7/8 .455 200 .045 495 466 456 291
11/8 .655 100 .050 420 395 387 247
13/8 .884 100 .055 373 351 344 219
15/8 1.14 100 .060 347 327 320 204
21/8 1.75 .070 309 291 285 182
25/8 2.48 .080 285 269 263 168
31/8 3.33 .090 270 254 248 159
35/8 4.29 .100 258 243 238 152
41/8 5.38 .110 249 235 230 147
51/8 7.61 .125 229 215 211 135
61/8 10.20 .140 213 201 196 125
81/8 19.30 .200 230 216 212 135

Tables give com puted allow able stress for annealed copper tube at indicated tem perature.

20 M u e lle r In d u s tr ie s , In c .
  
 
 
Material Test Certificate 
 
  
 
 
Product Certification 
 
 Date September 6, 2013

Product Certification
Mueller Copper Tube products are all manufactured in the USA. All tubing produced in Fulton, MS, and
Wynne, AR, is seamless and of UNS C12200 grade of copper and is manufactured to meet the chemical and
mechanical properties of the applicable ASTM specifications set forth below. When specified at order
placement, Mueller Copper Tube can supply Certified Tube to meet all requirements of the current
applicable ASTM specification, at an additional cost.

Streamline Copper Water Tube (Types K,L,M)

ASTM B88 and ANSI/NSF 61

Streamline Copper Refrigeration Service Coils

ASTM B280

Streamline Nitrogenized ACR Hard Drawn

Copper Tube - ASTM B280

Streamline Copper Drainage Tube (DWV)

ASTM B306

* Medical service tube. (1.662.862.1700)

* Oxygen & Medical Service Tube - To ASTM B819 (Types K &
L) Hard Drawn Straight Lengths Only in Accordance To CGA
* Cleanness Specification; CGA G4.1 (Compressed Gas
* Association); & NFPA 99 (Health Care Facilities).

NSF 61 Restriction Statement: “Copper Tube (Alloy C12200) is certified by NSF to ANSI/NSF Standard
61 for public water supplies meeting or in the process of meeting the U.S. EPA Lead and Copper Rule
(56FR 26460, June 7, 1991). Water supplies with pH less than 6.5 may require corrosion control to limit
copper solubility in drinking water.”

P. O. BOX 849  FULTON, MS 38843  (662) 862-1700  FAX (662) 862-3002

P. O. BOX 309  WYNNE, AR 72396  (870) 238-3201  FAX (870) 238-8724

  
 
 
High Pressure Statement 
 
R-410A/CO 2 Re frigera nt Applic a tions
Copper Tube & Fittings
Air-Conditioning & Refrigeration Applications

August 6, 2012

Mueller Streamline Co. proudly offers copper tube and fittings in compliance with the applicable ASTM/ASME
specifications. Also, following years of additional testing, the company is able to offer the industry’s first copper
tube and fittings UL Recognized to 700 PSI (48 Bar), as identified in Table A below. The testing and third-party
certification validates performance of these products to operating pressures of 700 PSI at 250°F.

TABLE A: Co p p er Pro d u cts UL Reco g n ized to 700PSI (48 Bar)

P roduct Line P roduct Type Dia me te r

 Streamline Refrigeration Service Coils 1/8” - 1-1/8”

Copper Tube  Streamline Line Sets & Mini-Splits 1/8” - 1-1/8”
 Streamline ACR - Type L (Hard Lengths) 1/8” - 1-3/8”
 Streamline ACR - Type K (Hard Lengths) 1/8” - 2-5/8”

Copper Fittings  Streamline Wrot Solder-Joint Pressure 1/8” - 2-5/8”

For your most demanding applications, Mueller Streamline Co. is able to provide the operating pressure ratings
beyond 700PSI (48 Bar) across key refrigerant piping sizes, as identified in Table B below.

TABLE B: Op eratin g Pres s u res fo r Hard Tu b e and Wro t Fittin g s

Diameter PSI (Bar) @ ≤ 68°F PSI (Bar) @ 180°F PSI (Bar) @ 250°F
1/8” to 1/2" 1370 (94.5) 1320 (91.0) 1170 (80.6)
5/8” 1370 (94.5) 1320 (91.0) 1170 (80.6)
7/8" 1000 (68.9) 975 (67.2) 850 (49.6)
1-1/8" 840 (57.9) 800 (55.1) 720 (48.3)
1-3/8" 800 (55.1) 770 (53.1) 700 (41.4)

As new technologies and refrigerants emerge, Mueller Streamline is committed to being a resource to our customers and
ensuring that our products are safe and reliable. If you have any product questions, please contact me or your sales
representative.

Sincerely,

Charles A. Stout, PhD., P.E.

Director - Research & Development
castout@muellerindustries.com