Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    25 SP650 1 MS Series Separators

    Uploaded by

    La Ode Adhan
    Moisture separators are designed to separate moisture and contaminants from steam or compressed air. They operate by decreasing the velocity of the fluid flow and using internal baffles to aid in separation. They are available in carbon steel or stainless steel, with ANSI flanged, screwed, or socket weld connections. Sizing is normally based on pipe size to maintain reasonable flow velocities, with pressure drops not exceeding an equivalent pipe length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    25 SP650 1 MS Series Separators

    Uploaded by

    La Ode Adhan
    28 views2 pages
    Moisture separators are designed to separate moisture and contaminants from steam or compressed air. They operate by decreasing the velocity of the fluid flow and using internal baffles to aid in separation. They are available in carbon steel or stainless steel, with ANSI flanged, screwed, or socket weld connections. Sizing is normally based on pipe size to maintain reasonable flow velocities, with pressure drops not exceeding an equivalent pipe length.

    Original Title

    25 SP650 1 MS Series Separators (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Moisture separators are designed to separate moisture and contaminants from steam or compressed air. They operate by decreasing the velocity of the fluid flow and using internal baffles to aid in separation. They are available in carbon steel or stainless steel, with ANSI flanged, screwed, or socket weld connections. Sizing is normally based on pipe size to maintain reasonable flow velocities, with pressure drops not exceeding an equivalent pipe length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views2 pages

    25 SP650 1 MS Series Separators

    Uploaded by

    La Ode Adhan
    Moisture separators are designed to separate moisture and contaminants from steam or compressed air. They operate by decreasing the velocity of the fluid flow and using internal baffles to aid in separation. They are available in carbon steel or stainless steel, with ANSI flanged, screwed, or socket weld connections. Sizing is normally based on pipe size to maintain reasonable flow velocities, with pressure drops not exceeding an equivalent pipe length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MOISTURE SEPARATORS

    MSF Series

    MST Series MSF Series

    OPERATION MATERIALS
    As steam or compressed air enters the oversized separator chamber Part Description
    the decreased velocity and internal baffle both aid in the separation of
    moisture and contaminants. Body Carbon Steel (Stainless Steel Optional)
    Fittings Carbon Steel (Stainless Steel Optional)
    DESIGN SPECIFICATIONS Baffle Carbon Steel (Stainless Steel Optional)
    Design Standards: ANSI B16.5
    Design Code: ASME Sect. VIII, Div. 1, 2001 Ed.
    MDMT: -20°F NOTES
    Hydrostatic Test: 1-1/2 times design pressure ● Higher pressure ratings available upon request
    Heat Treatments: None ● Dimensions can be modified to suit customer requirements

    Screwed/Socket Weld INSTALLATION


    Design Pressure: 600 psi @ 400°F Install in a horizontal pipeline with the drain pointed downwards and the flow
    TMO: 650°F in the direction of the indication arrow on the body. The recommended drain
    trap is a modulating float operated type
    150 lb. ANSI
    Design Pressure: 285 psi @ 100°F SIZING
    TMO: 565°F Normally selected by pipe size provided the piping size has been selected
    300 lb. ANSI within reasonable velocities. For factory sizing, please provide the range of
    Design Pressure: 740 psi @ 100°F flows and pressures anticipated. Pressure drops will not normally exceed
    TMO: 650°F an equivalent length of pipe.

    600 lb. ANSI


    Design Pressure: 1480 psi @ 100°F
    TMO: 650°F

    Tel: 1-888-300-9155 Fax: 1-888-300-9160 www.COLTONIND.com info@coltonind.com


    BULLETIN SP650-1
    MOISTURE SEPARATORS

    MSF Series

    MST Series MSF Series

    DIMENSIONS & WEIGHTS


    Size A B C D E Weight
    150 300 600
    mm in mm in mm in mm in mm in mm in kg lbs kg lbs kg Lbs
    15 1/2 220 8-5/8 132 5-3/16 271 10-5/8 20 3/4 150 6 --- --- --- --- 4 9
    20 3/4 222 8-3/4 149 5-7/8 308 12-1/8 20 3/4 150 6 --- --- --- --- 4.5 10
    25 1 235 9-1/4 150 6 358 14-1/8 20 3/4 150 6 --- --- --- --- 8.6 19
    32 1-1/4 235 9-1/4 180 7-1/8 412 16-1/4 20 3/4 150 6 --- --- --- --- 13.6 30
    40 1-1/2 285 11-1/4 195 7-5/8 482 19 25 1 200 8 --- --- --- --- 19.5 43
    50 2 296 11-5/8 206 8-1/8 525 20-5/8 25 1 200 8 --- --- --- --- 22.7 50
    65 2-1/2 571 22-1/2 238 9-3/8 622 24-1/2 25 1 250 10 50 109 51 112 51 113
    80 3 641 25-1/4 300 12 728 28-5/8 50 2 250 10 74 163 77 169 86 189
    100 4 736 29 322 12-5/8 792 31-3/16 50 2 300 12 108 237 117 258 135 297
    150 6 908 36 311 12-1/4 933 36-3/4 50 2 400 16 166 365 182 401 250 551
    200 8 1066 42 387 15-1/4 1222 48-1/8 50 2 500 20 202 445 272 600 441 972
    250 10 1238 48-3/4 685 27 1606 63-1/4 50 2 600 24 365 805 440 970 789 1740
    300 12 1257 49-1/2 758 29-7/8 1727 68 50 2 600 24 377 830 519 1145 912 2010

    Larger sizes and higher flange ratings are available upon request. Please consult factory

    ORDERING CODE
    TYPE CONNECTION - ANSI RATING BODY MATERIAL

    Example: MS F - 300 S

    MS – Moisture Separator T – Screwed NPT 150 – 150 lb. ANSI Rating S – Carbon Steel
    F – ANSI Flanged 300 – 300 lb. ANSI Rating SS4 – 304 Stainless Steel
    W – Socket Weld 600 – 600 lb. ANSI Rating SS6 – 316 Stainless Steel

    Colton has a policy of continuous product research and improvement and reserves the right to change design and specifications without notice

    Tel: 1-888-300-9155 Fax: 1-888-300-9160 www.COLTONIND.com info@coltonind.com


    BULLETIN SP650-1

    You might also like