Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Fixing Mesh With Nails

    Uploaded by

    Nguyen Hung
    Fix the first transverse bar of the mesh every 80 cm along the roll. Nail the mesh just before applying the slurry seal. The number of required fixings varies depending on the width of the mesh roll, with wider rolls requiring more fixings. Use spit clips that are 40-50 mm in length when used in asphalt, and 30 mm when used in concrete, installed with a spit gun to securely fix the mesh in place before applying the slurry seal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fixing Mesh With Nails

    Uploaded by

    Nguyen Hung
    29 views3 pages
    Fix the first transverse bar of the mesh every 80 cm along the roll. Nail the mesh just before applying the slurry seal. The number of required fixings varies depending on the width of the mesh roll, with wider rolls requiring more fixings. Use spit clips that are 40-50 mm in length when used in asphalt, and 30 mm when used in concrete, installed with a spit gun to securely fix the mesh in place before applying the slurry seal.

    Original Description:

    fixing mesh with nails

    Original Title

    fixing mesh with nails

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Fix the first transverse bar of the mesh every 80 cm along the roll. Nail the mesh just before applying the slurry seal. The number of required fixings varies depending on the width of the mesh roll, with wider rolls requiring more fixings. Use spit clips that are 40-50 mm in length when used in asphalt, and 30 mm when used in concrete, installed with a spit gun to securely fix the mesh in place before applying the slurry seal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    29 views3 pages

    Fixing Mesh With Nails

    Uploaded by

    Nguyen Hung
    Fix the first transverse bar of the mesh every 80 cm along the roll. Nail the mesh just before applying the slurry seal. The number of required fixings varies depending on the width of the mesh roll, with wider rolls requiring more fixings. Use spit clips that are 40-50 mm in length when used in asphalt, and 30 mm when used in concrete, installed with a spit gun to securely fix the mesh in place before applying the slurry seal.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    7.

    Fixing the mesh with nails

    • Fix the first transverse bar


    End of roll • Approximately every 80 cm
    80 cm. • Nail just before slurry seal operation
    First torsioned
    flat bar

    WHEN SLURRY SEALING: ONLY at the beginning of every roll

    Building
    Installation Procedure Products 1
    7. Fixing the mesh with nails
    Roll width Strand
    1 2 3 4
    Number of fixings
    200cm 3 0 2 0
    300cm 5 0 3 0
    330cm 5 0 3 0
    400cm 6 0 4 0

    4th strand

    3d strand

    2d strand

    1st strand

    Example : mesh width 4m

    Building
    Installation Procedure Products 2
    7. Fixing the mesh with nails
    • Use Spit clip A
    • Length 40 - 50 mm in asphalt
    • 40 mm : at lower temp.
    • 50 mm : at higher temp.
    • Length 30 mm in concrete
    • Use Spit P200 or P70 gun.

    On concrete -> drill holes into the concrete


    first to ensure good anchorage.

    Building
    Installation Procedure Products 3

    You might also like